332-428 Ford FE Engine Forum (Page 5 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 21 Visitors 68FBMustang, 20 guests

Not logged in | Login | Create Account

Post Now!

How much to cut the intake manifold?? View Thread - DaveU on Dec 18, 2008, 9:16 AM

Suggest you bolt it down first - Jay Brown on Dec 18, 2008, 9:26 AM

Intake Gaskests - Oliver barret on Dec 18, 2008, 9:52 AM

Those are Victor Reinz gaskets, part number MS15166X n/m - Jay Brown on Dec 18, 2008, 11:40 AM

Thanks for the Info N/M - Oliver barret on Dec 18, 2008, 11:43 AM

Thanks Jay.. - DaveU on Dec 18, 2008, 10:16 AM

Have you compared the dimensions with the old manifold? - David J on Dec 18, 2008, 11:36 AM

I see... - Jay Brown on Dec 18, 2008, 11:42 AM

Update, I did the dirty deed.. - daveU on Dec 18, 2008, 4:49 PM

You can win alot of bets saying "I even used studs for the intake", Nice solution.....n/m - Rod C on Dec 18, 2008, 7:04 PM

what did the - XR7 on Dec 19, 2008, 2:14 PM

It ran me 50 bucks.. - DaveU on Dec 19, 2008, 3:34 PM

Cut the intake - John on Dec 18, 2008, 2:59 PM

How are our California folks faring today? View Thread - Bill Ballinger on Dec 18, 2008, 8:42 AM

Non-Calfornia folks would laugh but, It's COLD!! - William Conley on Dec 18, 2008, 8:52 AM

Not laughing - Dsrtfox on Dec 18, 2008, 9:04 AM

Re: How are our California folks faring today? - Dennis Carrico on Dec 18, 2008, 9:24 AM

Western Mohave Desert checking in at 23 - Hawkrod on Dec 18, 2008, 9:26 AM

It was about 22*, 9 miles from the SF Bay and 10 miles from Pacific Ocean - Pippin on Dec 18, 2008, 9:37 AM

Slept in a cardboard box... - Tommy-T on Dec 18, 2008, 9:54 AM

Not CA but it's a balmy 12 degrees here in Chi-Town - Bob on Dec 18, 2008, 10:17 AM

Bad weather - DYNO427 on Dec 18, 2008, 12:32 PM

A fridge box is pretty comfy, and a little Louisiana Hot Sauce make anything edible - Bill Ballinger on Dec 18, 2008, 8:24 PM

Man I miss Louisiana crawfish - Morgan on Dec 19, 2008, 1:18 PM

That's good eating - Bill Ballinger on Dec 19, 2008, 3:15 PM

Re: How are our California folks faring today? - mike on Dec 18, 2008, 12:44 PM

Other then a cold, not bad just north of Sac Town. - Damon on Dec 18, 2008, 2:15 PM

Warmin' up - Falcon67 on Dec 18, 2008, 2:53 PM

it was 36 degrees INSIDE my shop last night! - Mike Braun on Dec 18, 2008, 3:32 PM

Hey Mike, do you know Paul Crawford? - Bob on Dec 19, 2008, 10:24 AM

That was Blue Norther, about as cold as it gets - Bill Ballinger on Dec 19, 2008, 9:30 AM

Damned Global warming. - Barry Gaugler on Dec 18, 2008, 3:26 PM

Great for business, Bad for the old bones - John on Dec 18, 2008, 5:31 PM

Try -4 here in southern Oregon!!! - Wes Adams Ford428CJ on Dec 18, 2008, 6:28 PM

Re: How are our California folks faring today? - Mike Z on Dec 18, 2008, 7:12 PM

more on frame ties View Thread - bykpainter on Dec 18, 2008, 7:01 AM

Mine would be completely removable. - Jim on Dec 18, 2008, 7:13 AM

Re: Mine would be completely removable. - bykpainter on Dec 18, 2008, 7:22 AM

Would be interesting to hear a purchasor's opinion on this - Gary B on Dec 18, 2008, 9:05 AM

Frame ties - Falcon67 on Dec 18, 2008, 7:47 AM

Re: Frame ties - Dsrtfox on Dec 18, 2008, 8:58 AM

Re: more on frame ties - Anonymous on Dec 18, 2008, 8:54 AM

All things considered, it's only ,,, - Bob on Dec 18, 2008, 10:12 AM

Mine is numbers matching - Falcon67 on Dec 18, 2008, 2:57 PM

Very funny Kelly.... - Bob on Dec 18, 2008, 4:09 PM

Re: more on frame ties - Anonymous on Dec 18, 2008, 8:11 PM

O/T but in the holiday spirit View Thread - jeff kristofick on Dec 18, 2008, 6:46 AM

valve cover rant! View Thread - Jason Engle on Dec 18, 2008, 5:27 AM

Bummer deal....but - BattlestarGalactic on Dec 18, 2008, 5:42 AM

link won't work for me... - Jason Engle on Dec 18, 2008, 5:49 AM

Sorry about that... - BattlestarGalactic on Dec 18, 2008, 6:06 AM

those might work - Jason Engle on Dec 18, 2008, 6:11 AM

Have the repro 428 snake covers - Ian on Dec 19, 2008, 2:01 AM

What about this... - Jim Whitton on Dec 18, 2008, 6:07 AM

I like that idea! - Jason Engle on Dec 18, 2008, 6:12 AM

Baffles - Kam on Dec 18, 2008, 6:39 AM

Baffles - Kam on Dec 18, 2008, 7:39 AM

I've got a set of those - Earl on Dec 18, 2008, 6:37 AM

Re: I've got a set of those - Jason Engle on Dec 18, 2008, 6:46 AM

Far East - Jeff on Dec 18, 2008, 7:18 AM

AND - Dsrtfox on Dec 18, 2008, 8:09 AM

Tried that - David J on Dec 18, 2008, 11:50 AM

Re: valve cover rant! - steve on Dec 18, 2008, 8:03 AM

OK, good to know - Jason Engle on Dec 18, 2008, 12:15 PM

update - Jason Engle on Dec 18, 2008, 12:25 PM

They will suck oil - Richard Dinsen on Dec 18, 2008, 1:37 PM

Hmm, One vote for one against - Jason Engle on Dec 18, 2008, 2:40 PM

I Share Your Pain - Wreckless Warren on Dec 18, 2008, 3:02 PM

branda covers - Gene on Dec 18, 2008, 3:35 PM

same here - Don on Dec 18, 2008, 5:58 PM

Re: same here - steve on Dec 18, 2008, 6:31 PM

Thanks Warren - Jason Engle on Dec 18, 2008, 4:05 PM

A set of "custom Chromed" set of VC, done at a good shop cost about $200+ Min. - Beoweolf on Dec 18, 2008, 9:29 PM

Jason $00.02 Just a few thoughts: The HELP parts store packagers - qikBBstang on Dec 19, 2008, 5:48 PM

Re: valve cover rant! - Roger Gardner on Dec 21, 2008, 6:10 PM

All I can say is WOW, w0w, Wow, wow.... How did I get stuck with this job? View Thread - Tony D on Dec 17, 2008, 10:51 PM

frizzies? - Tom P on Dec 17, 2008, 11:21 PM

Ever light a gas grille... - BattlestarGalactic on Dec 18, 2008, 5:47 AM

Lucky you've got hair... - Tommy-T on Dec 18, 2008, 8:26 AM

Any chance that your teardown would provide evidence to go after shop #1? - Gary B on Dec 18, 2008, 9:18 AM

well.. - Tony D on Dec 18, 2008, 10:15 AM

Re: All I can say is WOW, w0w, Wow, wow.... How did I get stuck with this job? - John on Dec 18, 2008, 5:25 PM

Re: All I can say is WOW, w0w, Wow, wow.... How did I get stuck with this job? - Tony D on Dec 18, 2008, 9:34 PM

More T&D SOHC Rocker Problems View Thread - Jay Brown on Dec 17, 2008, 8:16 PM

Re: More T&D SOHC Rocker Problems - Rory McNeil on Dec 17, 2008, 8:27 PM

Thanks Rory... - Jay Brown on Dec 17, 2008, 9:09 PM

Nothing to say but that Sucks - Faron Rhoads on Dec 17, 2008, 8:38 PM

Perhaps the posts.... - Bob on Dec 17, 2008, 9:02 PM

I saw Barry's post too... - Jay Brown on Dec 17, 2008, 9:16 PM

What these guys said and it may also be interesting to check the hardness of the shafts nm - Andy on Dec 17, 2008, 8:58 PM

Jay, T&D certainly has the.... - KenS on Dec 17, 2008, 9:21 PM

Here are my thoughts... - Steve Roehrs on Dec 17, 2008, 9:22 PM

Doubt the shafts are flexing... - Jay Brown on Dec 17, 2008, 9:30 PM

Maybe binding/off angle - MeanGene on Dec 17, 2008, 9:28 PM

Unfortunate news... - Mark on Dec 17, 2008, 9:36 PM

More Clearance & More Pressure. - Doug Garifo on Dec 17, 2008, 9:47 PM

Dougs comments sound good, but also wondered about poor chrome? - Pippin on Dec 17, 2008, 10:32 PM

Not chrome plated - Jay Brown on Dec 18, 2008, 7:09 AM

Is there a hardness specification? n/m - Pippin on Dec 18, 2008, 9:39 AM

I haven't seen one, but that doesn't mean there isn't one....n/m - Jay Brown on Dec 18, 2008, 11:46 AM

Oil Pressure - Jay Brown on Dec 18, 2008, 7:04 AM

Will this ever end?? - William Conley on Dec 17, 2008, 11:06 PM

Cammer - Tom P on Dec 17, 2008, 11:47 PM

Probably too hard. - Dave King on Dec 18, 2008, 12:34 AM

Not sure... - Jay Brown on Dec 18, 2008, 7:13 AM

Ohhh bummer... - 68GT500 on Dec 18, 2008, 2:34 AM

plain bearing design - Don on Dec 18, 2008, 3:47 AM

Try Casidium DLC, but get rid of the cause of the ring grooving first. - Mike on Dec 18, 2008, 5:36 AM

Here's a thought - Jim Whitton on Dec 18, 2008, 5:55 AM

Good idea... - Jay Brown on Dec 18, 2008, 7:16 AM

RE; assembling rocker that had a failed adjuster with one of the other adjusters and let i - qikBBstang on Dec 19, 2008, 6:23 PM

Those look like the elephant foot swivels on a Porsche - Bill Ballinger on Dec 18, 2008, 6:03 AM

I was thinking - Dsrtfox on Dec 18, 2008, 8:28 AM

As I see the broken adjuster, the break is at the point where the locknut has stretched... - Rod C on Dec 18, 2008, 6:34 AM

Small comment... - LanceH on Dec 18, 2008, 7:31 AM

Bushing wear - Steve Roehrs on Dec 18, 2008, 8:25 AM

Oil slots - Jay Brown on Dec 18, 2008, 8:44 AM

You should be able to test the edge on those shaft slots - William Conley on Dec 18, 2008, 8:57 AM

Have you calculated the allowable tensile stress? - Russ Mitchell on Dec 18, 2008, 10:54 AM

Run in stand - Joel on Dec 18, 2008, 11:00 AM

Joel has a great idea.... - Bob on Dec 18, 2008, 11:24 AM

Bill Conley is already working on this... - Jay Brown on Dec 18, 2008, 11:45 AM

Good to hear..... - Bob on Dec 18, 2008, 12:04 PM

Heck yeah I'll share the data! - William Conley on Dec 18, 2008, 12:33 PM

Sorry I "outed" you, Bill LOL! - Jay Brown on Dec 18, 2008, 12:36 PM

I'm fired up to get this going! - William Conley on Dec 18, 2008, 12:43 PM

Hey Bill...... - Bob on Dec 18, 2008, 1:29 PM

Thanks Bob for the good wishes - William Conley on Dec 18, 2008, 2:26 PM

Involve more threads in the stretch. - Dave Shoe on Dec 18, 2008, 12:17 PM

I agree... - Jay Brown on Dec 18, 2008, 12:34 PM

Spring pressure - FEDER on Dec 18, 2008, 4:11 PM

He is probably running stock valves and cams - Jay Brown on Dec 18, 2008, 4:46 PM

Jay, is Barillo running the non-adjustable OEM Ford .... - Bob on Dec 18, 2008, 5:59 PM

I think the non-adjustables... - Jay Brown on Dec 18, 2008, 6:44 PM

Rockers - FeWedge on Dec 19, 2008, 11:42 AM

I'd love too... - Jay Brown on Dec 19, 2008, 1:16 PM

Cushman doesn't show any SOHC rockers... - Bob on Dec 19, 2008, 2:24 PM

rocker - john on Dec 19, 2008, 8:44 PM

Thanks John... - Jay Brown on Dec 19, 2008, 9:02 PM

springs - john on Dec 20, 2008, 5:54 PM

shafts - john on Dec 20, 2008, 6:14 PM

Jay, they screwed up the adjuster manufacturing, so I wouldn't mess with the rocker yet. - Mike on Dec 19, 2008, 3:54 AM

440 Dodge @ Drag Week broke 5 rocker arm adjusters... - Dr. Mabuse on Dec 18, 2008, 12:58 PM

bushings - Jake R on Dec 18, 2008, 2:10 PM

Clearance specs - Doug on Dec 18, 2008, 4:33 PM

OT: 3speed Tranny ID View Thread - Robert Tolleson on Dec 17, 2008, 7:53 PM

Ford 3.03 will work fine if you use a truck bellhousing N/M - Hawkrod on Dec 17, 2008, 8:14 PM

I'm new here View Thread - mike saathoff on Dec 17, 2008, 7:18 PM

Hi Mike, Glad to have you aboard... - DaleP on Dec 17, 2008, 7:47 PM

4.6 in the wagon - mike saathoff on Dec 17, 2008, 8:05 PM

That looks more like a hemi than the new hemis - Gary B on Dec 17, 2008, 8:17 PM

Hi Mike...Cool cars....love that wagon !! - winr1 on Dec 17, 2008, 11:01 PM

Very cool - Tom P on Dec 17, 2008, 11:54 PM

control arm - Anonymous on Dec 18, 2008, 4:31 AM

Crap even the new guy is more talented than me - Rob on Dec 17, 2008, 11:11 PM

Me too... - Tommy-T on Dec 18, 2008, 1:14 PM

Great car... - Dave Walters on Dec 18, 2008, 8:13 AM

Coils on 4.6 DOHC (8 of em) - Anonymous on Dec 18, 2008, 9:04 AM

Thats a good looking motor ! - Anonymous on Dec 18, 2008, 1:36 PM

The 4.6 DOHC intake -n- stuff - mike saathoff on Dec 18, 2008, 4:52 PM

First carbed Mod Motor I've seen... - Dr. Mabuse on Dec 18, 2008, 2:55 PM

Stranded by snow...in Los Angeles?? View Thread - Tommy-T on Dec 17, 2008, 6:02 PM

Re: Stranded by snow...in Los Angeles?? - Mike Z on Dec 17, 2008, 6:05 PM

The big question is did Mrs. T make it home OK? - Bill Ballinger on Dec 17, 2008, 6:08 PM

Seasons in California are... - Tommy-T on Dec 18, 2008, 9:07 AM

What? Patti mean? That's just bein'playful dude - Bill Ballinger on Dec 18, 2008, 9:36 AM

I lost a 10 inch limb right onto one of my 62 Tbirds, it isn't looking good edited w/ pics - Hawkrod on Dec 17, 2008, 6:14 PM

Oh...so sorry about your 62 Hawkrod !!!...How about that global warming.... - winr1 on Dec 17, 2008, 6:19 PM

I think I'm going to cry for you! - Bill Ballinger on Dec 17, 2008, 6:26 PM

Owww...I am going to cry also !!.....I hope it is not too bad... - winr1 on Dec 17, 2008, 6:44 PM

Ouch! - SLT on Dec 17, 2008, 7:03 PM

Ohh Damnn!! - Robert Tolleson on Dec 17, 2008, 7:19 PM

Sorry about your bird,,, - steve meyer on Dec 17, 2008, 7:38 PM

Amother bigger limb just hit the house - Hawkrod on Dec 17, 2008, 8:13 PM

Sorry to hear - Gary B on Dec 17, 2008, 8:24 PM

Yikes!! - William Conley on Dec 17, 2008, 11:09 PM

snow... - Tom P on Dec 18, 2008, 12:00 AM

Re: Vegas too!! - Barry Byer on Dec 17, 2008, 7:00 PM

Vegas too!! - Barry Byer on Dec 17, 2008, 7:00 PM

I'd offer you a place to stay but... - SLT on Dec 17, 2008, 7:02 PM

Its not him standing over you as much as the ax - Bill Ballinger on Dec 17, 2008, 7:12 PM

Didn't think of that... - SLT on Dec 17, 2008, 7:45 PM

No problem - Ross on Dec 17, 2008, 7:10 PM

gee, i've been griping about the 19 below temp the other morning.... - johannarich. on Dec 17, 2008, 8:03 PM

Yep, here in San Francisco up to Santa Rosa, we are in the teens and 20's - Pippin on Dec 17, 2008, 10:34 PM

weather - Tim Krenz on Dec 18, 2008, 10:42 AM

'66 Galaxie crank pulley issues with factory AC. View Thread - Bob Sprowl on Dec 17, 2008, 6:01 PM

AC cars use a much smaller water pump pulley.... - Hawkrod on Dec 17, 2008, 6:18 PM

Brackets, Pullies, & Misc. - Nathan on Dec 19, 2008, 10:05 AM

1970 Cougar Convertible FE swap View Thread - 7TCatvert on Dec 17, 2008, 5:56 PM

Good find! - Bob Sprowl on Dec 17, 2008, 6:05 PM

Hey 7T, you have any pics ??...That will be a cool car... - winr1 on Dec 17, 2008, 6:12 PM

Pictures - 7TCatvert on Dec 17, 2008, 9:44 PM

NICE! FE that thing! FrEE the beast! n/m - Pippin on Dec 17, 2008, 10:36 PM

OT..I bought a set of Perfect Circle plasma moly rings on ebay..I would have bought... View Thread - winr1 on Dec 17, 2008, 4:38 PM

you're probably... - Evan Gaffney on Dec 17, 2008, 4:46 PM

Hi Evan, he has a more of the rings and a bunch of other stuff on ebay still, thanks... - winr1 on Dec 17, 2008, 4:50 PM

File an item not as described complaint and file a PayPal dispute - Hawkrod on Dec 17, 2008, 4:50 PM

Thanks Hawkrod..I will do that.. - winr1 on Dec 17, 2008, 5:32 PM

O/T Extended vacation for Chryslers employees View Thread - Josh on Dec 17, 2008, 4:37 PM

O/T 66 gaiaxie help with dash cap View Thread - Bill Orrick on Dec 17, 2008, 3:47 PM

I've been into these alot inthe last 4 months. - Bob Sprowl on Dec 17, 2008, 4:05 PM

The 65 Padded Dash is Different From The 66 in Appearance - Wreckless Warren on Dec 17, 2008, 4:18 PM

A few differences. - cleandan on Dec 18, 2008, 12:36 PM

the new valve cover gasket forget victor or felpro View Thread - David Ventura on Dec 17, 2008, 3:01 PM

This Bud's for you! - Josh on Dec 17, 2008, 4:28 PM

method to that madness - Tom P on Dec 17, 2008, 4:58 PM

Jerico HP, How much before boom? View Thread - Gary on Dec 17, 2008, 2:22 PM

Re: Jerico HP, How much before boom? - Jeff Colvert on Dec 17, 2008, 2:59 PM

The most important issues... - Bob on Dec 17, 2008, 3:02 PM

Love this line..."What YOU need to decide is: Is it cheaper to..." - Pippin on Dec 17, 2008, 3:08 PM

Not the Clutchless version - Gary on Dec 17, 2008, 3:38 PM

Jerico, RAM and McLeod adjustable clutches - XR7 on Dec 17, 2008, 4:42 PM

Jerico go boom?...why hell yes.......sometimes - Mark Artis on Dec 17, 2008, 3:56 PM

boninfante clutch - Anonymous on Dec 17, 2008, 8:21 PM

Boninfante clutch - Mark Artis on Dec 18, 2008, 5:03 AM

Wow...alot of CW Mark...... - BattlestarGalactic on Dec 17, 2008, 9:10 PM

Some Hemi's are running 8.50s with the Jerico - Stephen & Horace Johnson on Dec 17, 2008, 4:30 PM

I find - Tom P on Dec 17, 2008, 5:11 PM

Re: Jerico HP, How much before boom? - Jay Zolko on Dec 17, 2008, 7:14 PM

There are Two Jerico 4 speeds available.. - DaleP on Dec 17, 2008, 7:43 PM

Have the same as you Dale - Anonymous on Dec 17, 2008, 7:53 PM

I broke second gear twice, but - DaleP on Dec 17, 2008, 8:04 PM

My Setup - Rory McNeil on Dec 17, 2008, 8:59 PM

Wagon set up... - BattlestarGalactic on Dec 17, 2008, 9:18 PM

Re: My Setup - Jeff Colvert on Dec 18, 2008, 9:51 AM

Jercio and G-Force article: - Bob on Dec 18, 2008, 1:54 PM

Trunk Mounted Battery Cables View Thread - Anonymous on Dec 17, 2008, 1:11 PM

Re: Trunk Mounted Battery Cables - Anonymous on Dec 17, 2008, 2:15 PM

RE MAKE YUR OWN USE WELDING CABLE - frank gutierrez on Dec 17, 2008, 3:04 PM

Battery Cable - Jim M on Dec 17, 2008, 3:39 PM

I have used nothing but.... - KenS on Dec 17, 2008, 4:03 PM

Relocate solenoid? - Gary B on Dec 17, 2008, 8:27 PM

What I did... - BattlestarGalactic on Dec 17, 2008, 9:21 PM

10 ga, ? - Anonymous on Dec 18, 2008, 1:43 PM

Interesting articles on Ford... View Thread - Marty Haynes on Dec 17, 2008, 10:11 AM

Guys, I admit that I have no clue as to what I 'm talking about here - Cliff Harmon on Dec 17, 2008, 3:59 PM

Lee's sucess since leaving Chrysler has been underwhelming - bbr60 on Dec 17, 2008, 5:08 PM

Bicycle still around,and a message from Lee - bbr60 on Dec 17, 2008, 5:31 PM

Now that's not a bad idea - steve meyer on Dec 17, 2008, 6:00 PM

Re: Guys, I admit that I have no clue as to what I 'm talking about here - John on Dec 17, 2008, 6:26 PM

True enough, there was a government bailout, but - Cliff Harmon on Dec 17, 2008, 7:01 PM

Mr. Mulally is doing a fine job at Ford. Our first impressions when he arrived were....... - Rod C on Dec 18, 2008, 5:57 AM

O/T Pipe Bender View Thread - MeanGene on Dec 17, 2008, 9:45 AM

Pipe vs. tubing - Phil Swenson on Dec 17, 2008, 10:06 AM

Correction Phil, Pipefitters don't bend their pipe, they use fittings. Electricians use... - Rod C on Dec 17, 2008, 10:11 AM

I agree - MeanGene on Dec 17, 2008, 10:13 AM

Can you post a link. As an Electrician, I've bent my share of conduit, both rigid and..... - Rod C on Dec 17, 2008, 10:09 AM

Here's the Speedway bender... - Phil Swenson on Dec 17, 2008, 10:19 AM

Speedway one looks good - MeanGene on Dec 17, 2008, 10:40 AM

pipe bender - John Ferguson on Dec 17, 2008, 10:19 AM

I have one of ... - Mike Gaffney on Dec 17, 2008, 11:22 AM

bender - Tom P on Dec 17, 2008, 5:17 PM

Happy holidays to all, My casa to your Casa View Thread - Cyclone crazy on Dec 17, 2008, 9:10 AM

Happy Holidays to you and yours CC..and the whole FE crew.. - winr1 on Dec 17, 2008, 6:42 PM

Merry Christmas and Happy New Year to you too Chuck. - David F. on Dec 18, 2008, 4:05 AM

Water Pump- Starter-Alternator Recommendations View Thread - Don Hall on Dec 17, 2008, 9:09 AM

RobbMC for the starter. - John Bednorz on Dec 17, 2008, 9:24 AM

absolutely - fordsel on Dec 17, 2008, 9:38 AM

Our advertisers above can.... - KenS on Dec 17, 2008, 9:25 AM

parts - fordsel on Dec 17, 2008, 9:40 AM

on that alternator - Bob C on Dec 17, 2008, 10:02 AM

link to 3g wiring diagram - Jason Engle on Dec 17, 2008, 10:05 AM

Thanks for the link but - Bob C on Dec 17, 2008, 10:38 AM

FlowKooler pump - Greg on Dec 18, 2008, 4:30 AM

The 'claim to fame' of.... - KenS on Dec 19, 2008, 10:02 AM

Congrats. Jay Brown on the GURU from hot rod. I am View Thread - Cyclone crazy on Dec 17, 2008, 7:47 AM

Thanks Chuck... - Jay Brown on Dec 17, 2008, 9:44 AM

not only a guru - Goose' on Dec 17, 2008, 2:29 PM

Bandwagon!! - Gary on Dec 17, 2008, 2:33 PM

As a newb - Robert Tolleson on Dec 17, 2008, 8:01 PM

how big is too big?? View Thread - bykpainter on Dec 17, 2008, 6:09 AM

Re: how big is too big?? - Jody Aberts on Dec 17, 2008, 6:27 AM

The Fairlane can take alot but... - Dave Walters on Dec 17, 2008, 7:00 AM

Re: The Fairlane can take alot but... - bykpainter on Dec 17, 2008, 7:05 AM

Re: how big is too big?? - steve on Dec 17, 2008, 6:56 AM

Re: how big is too big?? - bykpainter on Dec 17, 2008, 7:07 AM

sub frame connectors - Mark Artis on Dec 17, 2008, 7:01 AM

Build as big as your wallet will allow, however, if you're trying to maintain....... - Rod C on Dec 17, 2008, 7:10 AM

Re: Build as big as your wallet will allow, however, if you're trying to maintain....... - bykpainter on Dec 17, 2008, 7:18 AM

I like your style, low budget and lookin' sharp, LOL...n/m - Rod C on Dec 17, 2008, 7:31 AM

Piston rod combo - Kam on Dec 17, 2008, 7:44 AM

My 66 Caliente, same body as fairlane, 400+ hp 390 - Cyclone crazy on Dec 17, 2008, 8:07 AM

The doors on my '67 Mustang... - Tommy-T on Dec 17, 2008, 8:59 AM

Agree the plan doesn't make a lot of - Bob on Dec 17, 2008, 9:09 AM

Running a unibody.... - KenS on Dec 17, 2008, 9:42 AM

sub-frame connectors are a good idea, period. - michael on Dec 17, 2008, 2:03 PM

Here's the connectors on my 66GTA in progress...... - Jim on Dec 17, 2008, 5:43 PM

Great pics Jim. Anyone else got.... - Andy (Oz) on Dec 17, 2008, 5:49 PM

The way I like.... - KenS on Dec 17, 2008, 9:53 PM

Re: Here's the connectors on my 66GTA in progress...... - bykpainter on Dec 18, 2008, 5:52 AM

I agree with Ken-letting them 'into' the floor would be even stronger, - Jim on Dec 18, 2008, 7:05 AM

MIne are sliced through the floor - Barry R on Dec 19, 2008, 5:46 AM

Rod C. check your stolen car thread. View Thread - StarlinerRon on Dec 16, 2008, 9:25 PM

Thank you Ron, I'll check into that.........n/m - Rod C on Dec 17, 2008, 7:12 AM

T&D SOHC rocker testing View Thread - Keith Craft on Dec 16, 2008, 7:46 PM

Hmmmmmm...... - Jay Brown on Dec 16, 2008, 8:09 PM

Also retorque the broken adjusters. - Dave Shoe on Dec 16, 2008, 10:16 PM

adj's - john on Dec 17, 2008, 3:02 PM

defined yield strength - Don on Dec 17, 2008, 3:41 AM

Batch samples?... - Dr. Mabuse on Dec 17, 2008, 4:23 AM

IMO, Larry should not had 'figured' that Jay over-torgued the adjusters. What he.......... - Rod C on Dec 17, 2008, 7:29 AM

When I spoke with Larry, he didn't really imply that... - Jay Brown on Dec 17, 2008, 9:39 AM

Do you suppose Ford may have already run into this type of failure - Dave Eames on Dec 17, 2008, 9:57 AM

I have a cammer manual.... - KenS on Dec 17, 2008, 10:42 AM

Cammer started with non-adj shims, later went to adjustables. - Dave Shoe on Dec 17, 2008, 10:54 AM

SOHC rockers - RWJ on Dec 17, 2008, 2:53 PM

rockers - john on Dec 17, 2008, 3:05 PM

Thanks for the update. - Dave Shoe on Dec 18, 2008, 5:38 AM

I wonder if the adjuster could be made from a nodular ductile iron? - Bill Ballinger on Dec 17, 2008, 6:52 PM

Rockers - Barry R on Dec 17, 2008, 8:14 PM

Interesting idea. - Dave Shoe on Dec 18, 2008, 5:49 AM

Blue Thunder intake View Thread - blzrrod on Dec 16, 2008, 7:44 PM

Do not think you will see any problems - Keith Craft on Dec 16, 2008, 7:49 PM

I havent had an open crossover in years - Ross on Dec 16, 2008, 8:08 PM

Thanks again. - blzrrod on Dec 16, 2008, 9:01 PM

I drilled one side - kelly on Dec 17, 2008, 4:53 AM

Huh - Howie on Dec 17, 2008, 5:56 AM

I think he means.. - BattlestarGalactic on Dec 17, 2008, 7:29 AM

Won't matter if the car has headers - David J on Dec 17, 2008, 7:37 AM

I'm thinking the One Sided Heat Crossover might make for big problems - qikBBstang on Dec 19, 2008, 6:34 PM

69 CJ race question................... View Thread - RonW on Dec 16, 2008, 7:15 PM

Re: 69 CJ race question................... - r on Dec 16, 2008, 7:22 PM

Thanks r............................... - RonW on Dec 16, 2008, 8:51 PM

Re: Thanks r............................... - Rusty Gillis on Dec 17, 2008, 9:40 AM

Thanks Rusty............................. - RonW on Dec 17, 2008, 8:45 PM

Shipping weight - Rusty Gillis on Dec 18, 2008, 6:42 AM

Great info Rusty, thanks a lot.................n/m - RonW on Dec 18, 2008, 6:02 PM

O/T. Dog question View Thread - Alan Casida on Dec 16, 2008, 6:41 PM

You are probably ok............................. - RonW on Dec 16, 2008, 6:49 PM

Re: O/T. Dog question - Kim in Oregon on Dec 16, 2008, 8:03 PM

Re: O/T. Dog question - Franco on Dec 16, 2008, 8:07 PM

Get a Cat - Mark Artis on Dec 17, 2008, 7:05 AM

Happy Holidays everyone View Thread - dedom on Dec 16, 2008, 6:00 PM

Same to you and have a ... - Mike Gaffney on Dec 16, 2008, 6:29 PM

You too n/m - Bill Ballinger on Dec 16, 2008, 6:29 PM

Yes, you also dedom..and all the FE guys and there Familys out there !! - winr1 on Dec 16, 2008, 9:15 PM

Billy Wade in Georgia, I lost your phone # and e-mail, contact me.....N/M View Thread - hollis franks on Dec 16, 2008, 5:35 PM

Hooker SuperComp vs Crites Headers for a 65 Galaxie View Thread - Wreckless Warren on Dec 16, 2008, 4:43 PM

Super comps - John on Dec 16, 2008, 6:02 PM

Hey Mark P~ View Thread - Wes Adams Ford428CJ on Dec 16, 2008, 4:01 PM

Any 63 Galaxie owners? View Thread - sixty3 on Dec 16, 2008, 3:31 PM

Got a 63 1/2 fastback I spent 13 years on. Am presently - Inthegarge on Dec 16, 2008, 3:38 PM

Re: Got a 63 1/2 fastback I spent 13 years on. Am presently - Anonymous on Dec 16, 2008, 4:21 PM

options? - sixty3 on Dec 16, 2008, 4:52 PM

Well since you want us to spend your money - Howie on Dec 16, 2008, 5:05 PM

Doing a 63 box roof now........ - Mark Artis on Dec 16, 2008, 5:17 PM

63 - Richard on Dec 16, 2008, 5:28 PM

heres my 63 boxtop - rick on Dec 16, 2008, 6:38 PM

Showed me yours, I'll show you mine - Bob Rose on Dec 18, 2008, 5:58 AM

Well, let me tell you how it worked out for me. - Ray Hillebrand on Dec 16, 2008, 8:32 PM

Hey Ray.....heh..I bought a new 3/8 air pistol, tried it out and ended up taking my..... - winr1 on Dec 16, 2008, 9:30 PM

63 galaxie - mike keesee on Dec 17, 2008, 1:56 AM

63 500 2 door sedan - kelly on Dec 17, 2008, 4:51 AM

My 63 1/2 Galaxie 500XL - Rich Ferguson on Dec 17, 2008, 5:46 AM

Just bought one last Friday... - Phil Swenson on Dec 17, 2008, 7:11 AM

Re: Just bought one last Friday... - Ray Hillebrand on Dec 17, 2008, 9:08 AM

Re: Just bought one last Friday... - Benker on Dec 17, 2008, 2:44 PM

any 63 galaxie owners - bill d on Dec 17, 2008, 6:14 PM

I have a 63 Sportsroof with only one option, AS-225-390. They removed........ - Rod C on Dec 18, 2008, 9:00 AM

'63 Boxtop 500XL, G code 406/405hp - tom406 on Dec 18, 2008, 7:20 PM

O/T questions for experienced fabricators, trying to fab heim joint clutch linkage View Thread - TonyS on Dec 16, 2008, 3:06 PM

bending pipe - Worth, Blaine on Dec 16, 2008, 3:41 PM

bending - Tom P on Dec 16, 2008, 4:31 PM

I need a 15 - 20 degree bend to clear the power brake booster - TonyS. on Dec 17, 2008, 4:46 AM

How tight of a bend are you trying to make ? - Mike Gaffney on Dec 16, 2008, 4:30 PM

Mike - Tom P on Dec 16, 2008, 4:33 PM

Thanks Tom ... - Mike Gaffney on Dec 16, 2008, 6:35 PM

All I need is a 15 or 20 degree bend and it'll be fine, Ive never done this before - TonyS. on Dec 17, 2008, 4:42 AM

Tony, I just want to reiterate - Ross on Dec 17, 2008, 5:24 AM

Ross, You make a good point I did not originally consider - TonyS. on Dec 17, 2008, 6:39 AM

You also brought up a good point - Ross on Dec 17, 2008, 8:40 AM

Thanks Ross n/m - TonyS. on Dec 17, 2008, 9:24 AM

Re: Thanks Ross n/m - Anonymous on Dec 17, 2008, 9:28 AM

All mine turned out straight - Ross on Dec 16, 2008, 5:32 PM

What I did ... - Rory McNeil on Dec 16, 2008, 8:51 PM

On my 67 with power brakes... - John Bednorz on Dec 17, 2008, 9:22 AM

Thanks John, I did buy the Scott Drake roller clutch pedal kit, - TonyS. on Dec 17, 2008, 9:31 AM

Ed ProPort FE Heads How do they walk with balls the size of Basket Balls? View Thread - qikBBstang on Dec 16, 2008, 2:53 PM

I just looked at your link and - DaleP on Dec 16, 2008, 3:15 PM

the way I see that - Tom P on Dec 16, 2008, 4:25 PM

Re: the way I see that - afret on Dec 16, 2008, 6:46 PM

Edelbrock Pro Port heads - Keith Craft on Dec 16, 2008, 8:06 PM

I get the porting portion, it's just that.. - DaleP on Dec 16, 2008, 9:25 PM

Re: I get the porting portion, it's just that.. - Jeff Colvert on Dec 17, 2008, 8:14 AM

Clear now, thanks Jeff !! N/M - DaleP on Dec 17, 2008, 8:34 AM

Aftermarket ignition advise needed View Thread - mikee on Dec 16, 2008, 2:13 PM

ignition box - fordsel on Dec 16, 2008, 2:51 PM

Capcitive vs Inductive - mikee on Dec 16, 2008, 3:32 PM

some CD boxes can shoot multiple sparks to - Pippin on Dec 16, 2008, 3:55 PM

Multi spark boxes - Tom J. on Dec 16, 2008, 6:41 PM

The way I understand the difference - Howie on Dec 16, 2008, 4:09 PM

Re: ignition box - Pete on Dec 17, 2008, 6:53 AM

Most OE ignition systems are CD. Get a Duraspark dist. , wire in a ballast - Anonymous on Dec 17, 2008, 5:49 PM

Ignitions - Kam on Dec 17, 2008, 8:06 AM

O/T Front wheel/rim weight... View Thread - Craig on Dec 16, 2008, 1:28 PM

O/T Front wheel/rim weight... - Mike Gray on Dec 16, 2008, 2:15 PM

lightness - Tom P on Dec 16, 2008, 2:30 PM

Tom, finding anything made....... - Craig on Dec 16, 2008, 3:18 PM

yes - Tom P on Dec 16, 2008, 4:35 PM

front rims - Jim V on Dec 16, 2008, 3:37 PM

Lightest isn't necessarily street legal.. - DaleP on Dec 16, 2008, 9:29 PM

I've used - Todd K on Dec 17, 2008, 3:50 AM

Dragway... that's it - Tom P on Dec 17, 2008, 12:02 PM

Your correct Tom! - Craig on Dec 17, 2008, 1:16 PM

Ha, you guys gets deals. - Tom P on Dec 17, 2008, 5:35 PM

Strange cranking problem. View Thread - Gary on Dec 16, 2008, 11:42 AM

Sounds to me as if.... - KenS on Dec 16, 2008, 11:52 AM

HARD STARTING - DYNO427 on Dec 16, 2008, 11:55 AM

I agree with to much initial - Harry H on Dec 16, 2008, 1:02 PM

Re: Strange cranking problem. - Anonymous on Dec 16, 2008, 1:28 PM

Common problem..................... - RonW on Dec 16, 2008, 1:58 PM

start problem - fordsel on Dec 16, 2008, 2:53 PM

What are your cam specs ~ - Wes Adams Ford428CJ on Dec 16, 2008, 4:00 PM

Normal condition. - Dave Shoe on Dec 16, 2008, 10:29 PM

Whats is timing set at? - Ross on Dec 17, 2008, 9:04 AM

Thanks for all the suggestions - Gary on Dec 17, 2008, 9:36 AM

What plug # are you running? - Pippin on Dec 17, 2008, 3:04 PM

Re: Strange cranking problem. - Jeff Tepper on Dec 17, 2008, 9:49 AM

Please repost in the classifieds - Thanks n/m View Thread - Ian on Dec 16, 2008, 11:34 AM

I don't mean to be a prick but - Ian on Dec 16, 2008, 6:25 PM

I don't mean to be a prick either, but... - Jay Brown on Dec 16, 2008, 7:16 PM

Ok, I agree - Ian on Dec 16, 2008, 11:44 PM

Ian - Howie on Dec 17, 2008, 5:46 AM

I've been a member on this forum since 2002 I think - Ian on Dec 17, 2008, 12:11 PM

Re: But should the rules not apply to everyone? - MeanGene on Dec 17, 2008, 6:02 AM

Only an idiot would think they can do and say as they please on somebody else's forum - Hawkrod on Dec 17, 2008, 7:33 AM

Thanks for making my point clearer LOL - MeanGene on Dec 17, 2008, 8:28 AM

Yes, thank heaven I am not a mod here anymore - Hawkrod on Dec 17, 2008, 9:22 AM

Maybe I am an Ass - Ian on Dec 17, 2008, 12:39 PM

That response was not meant for you Ian, it was specificaly for MeanGene - Hawkrod on Dec 17, 2008, 2:17 PM

Ian those are responses and a such they are allowed - Hawkrod on Dec 17, 2008, 7:38 AM

I say refund Ian's membership dues. - Bob Hasty on Dec 17, 2008, 9:00 AM

And thats just it. - Ian on Dec 17, 2008, 11:56 AM

I am sorry you don't see the difference. It was an eBay item that was for sale - Hawkrod on Dec 17, 2008, 12:43 PM

Thank you - Ian on Dec 17, 2008, 12:49 PM

Ian, you just came on a little rough. - Bob Hasty on Dec 17, 2008, 1:55 PM

I know it is a tough job - Ian on Dec 17, 2008, 2:09 PM

Periodically members have mis posted in the main forum - Ray Hillebrand on Dec 17, 2008, 8:04 PM

Nice to see Jay Brown's picture... View Thread - Lance on Dec 16, 2008, 7:00 AM

a picture is worth 1000 words and the picture captured Jay with the SOHC's Valve Cover - qikBBstang on Dec 16, 2008, 7:04 AM

Jay looks like a young pup though. lol - David F. on Dec 16, 2008, 9:18 AM

Looks can be deceiving... - Jay Brown on Dec 16, 2008, 9:33 AM

airbrushed... - Tom P on Dec 16, 2008, 9:46 AM

More like HVLP?.............n/m - Rod C on Dec 16, 2008, 12:12 PM

JAY BROWN!!!! - gopher on Dec 16, 2008, 5:18 PM

Thanks, Goph... - Jay Brown on Dec 16, 2008, 7:31 PM

Thanks... - Jay Brown on Dec 16, 2008, 9:35 AM

now Lance I've seen Jay hes not ugly. just a bet ruined - Bill Orrick on Dec 16, 2008, 10:41 AM

Gee, thanks Bill LOL! n/m - Jay Brown on Dec 16, 2008, 11:37 AM

Congrats Jay and Thanks... - Mr. Hot Hod Magazine Celebrity type Star on Dec 16, 2008, 8:11 PM

pictures - Mr. Hot Hod Magazine Celebrity type Star on Dec 16, 2008, 8:19 PM

LOL!! Nice pictures... - Jay Brown on Dec 16, 2008, 8:24 PM

hey Joel - steve on Dec 16, 2008, 8:40 PM

Pavaratsi?? - Jay Brown on Dec 16, 2008, 8:26 PM

Hot Rods to Hell - custom300 on Dec 16, 2008, 9:04 PM

Pavartzi - Tom P on Dec 16, 2008, 9:05 PM

Sonic Cleaning an interesting byproduct View Thread - qikBBstang on Dec 16, 2008, 6:59 AM

No before and after pictures, or during process pics? - Larry Hampton on Dec 16, 2008, 7:08 AM

The second guy may........ - Craig on Dec 16, 2008, 1:33 PM

How many units did you tell them you were going to purchase - Gary B on Dec 16, 2008, 4:51 PM

Be sure to get all the beads out of - StarlinerRon on Dec 16, 2008, 5:09 PM

Nitriding: Is it thing of the past or what? View Thread - qikBBstang on Dec 16, 2008, 6:32 AM

Re: Nitriding: Is it thing of the past or what? - 427Kevin on Dec 16, 2008, 6:54 AM

Kevin did that crank come back jet-black or is that dependent on - qikBBstang on Dec 16, 2008, 7:01 AM

re:color - 427Kevin on Dec 16, 2008, 9:14 AM

Re: Nitriding: Is it thing of the past or what? - Rory McNeil on Dec 16, 2008, 8:55 AM

re:cracks - 427Kevin on Dec 16, 2008, 9:17 AM

Do Ford cranks need this? - Rich Ferguson on Dec 16, 2008, 7:32 AM

As far as I remember - dedom on Dec 16, 2008, 8:03 AM

Nitriding is a great process - William Conley on Dec 16, 2008, 9:10 AM

Re: Nitriding: Is it thing of the past or what? - Jeff Colvert on Dec 16, 2008, 9:28 AM

I have tried both. - Gary on Dec 16, 2008, 11:07 AM

Re: I have tried both. - Jeff Colvert on Dec 16, 2008, 11:57 AM

Jeff...... - Sohcbob on Dec 16, 2008, 11:31 AM

While I'm no expert... - Tommy-T on Dec 16, 2008, 11:25 AM

Notice that Kevin.... - KenS on Dec 16, 2008, 11:49 AM

Re: Dimensional Change - qikBBstang on Dec 16, 2008, 12:05 PM

Custom Head gasket View Thread - Roberson on Dec 16, 2008, 5:48 AM

SCE.... - Bob on Dec 16, 2008, 6:49 AM

You might check with.... - KenS on Dec 16, 2008, 12:05 PM

Thanks Guys - Roberson on Dec 16, 2008, 3:02 PM

FWIW, I had to whack the head.... - KenS on Dec 17, 2008, 10:16 AM

Steel drag wheels? View Thread - Doug Bender on Dec 16, 2008, 5:39 AM

Wheel options - David J on Dec 16, 2008, 5:48 AM

wheel vintiques - Jason Engle on Dec 16, 2008, 6:35 AM

Weldcraft does.... - Bob on Dec 16, 2008, 6:54 AM

I doubt you can fit a 11.5" tire in a Fairlane - DaleP on Dec 16, 2008, 7:12 AM

Come to think.... - Bob on Dec 16, 2008, 7:25 AM

Didn't see any 4.75 B.S. - Doug Bender on Dec 16, 2008, 7:34 AM

Here's the Allied...... - Bob on Dec 16, 2008, 7:53 AM

you can even order those black rims with a custom offset from Summit. - Pippin on Dec 16, 2008, 9:57 AM

M/T Specs - Doug Bender on Dec 16, 2008, 7:29 AM

You can try this gizzmo. - Howie on Dec 16, 2008, 8:20 AM

Now that's a stupid chart... - DaleP on Dec 16, 2008, 3:35 PM

Re: Now that's a stupid chart... - Anonymous on Dec 16, 2008, 5:23 PM

That wide of a tire will never fit.... - Dave Walters on Dec 16, 2008, 8:11 AM

The M/T non radial slick 28x9x15 is a consideration - Doug Bender on Dec 16, 2008, 8:32 AM

Depends on how you want to drive the car - David J on Dec 16, 2008, 8:43 AM

Usage - Doug Bender on Dec 16, 2008, 8:54 AM

Options - David J on Dec 16, 2008, 9:15 AM

Tire info - Doug Bender on Dec 19, 2008, 8:59 AM

Drag wheels - Fairlane - Falcon67 on Dec 16, 2008, 8:54 AM

Re: Drag wheels - Fairlane - Rory McNeil on Dec 16, 2008, 9:22 AM

Re: Drag wheels - Fairlane - afret on Dec 16, 2008, 9:25 AM

Spacer - Falcon67 on Dec 16, 2008, 3:07 PM

Thanks. n/m - Anonymous on Dec 16, 2008, 5:10 PM

Fit - Tom P on Dec 16, 2008, 9:30 AM

Leaf springs and snubber - Falcon67 on Dec 16, 2008, 3:09 PM

Custom width styled steel wheels - Woody Owens on Dec 16, 2008, 12:38 PM

Re: Steel drag wheels? - Anonymous on Dec 16, 2008, 1:33 PM

Hey Doug... - Dave Walters on Dec 16, 2008, 4:45 PM

I have that exact tire on one of my cars - StarlinerRon on Dec 16, 2008, 5:47 PM

Blue Thunder HR head flow numbers View Thread - Todd on Dec 16, 2008, 4:17 AM

Excellent numbers... - Jay Brown on Dec 16, 2008, 11:42 AM

I'm having a brain fade, will those work on a 428? - Larry Hampton on Dec 16, 2008, 12:23 PM

Re: I'm having a brain fade, will those work on a 428? - Todd Keen on Dec 16, 2008, 1:55 PM

Well, those are the heads, supplier and porter I had planned on using.... - Larry Hampton on Dec 16, 2008, 3:06 PM

May work on a 4.16 bore - Gary on Dec 16, 2008, 4:17 PM

re: May work on a 4.16 bore - XR7 on Dec 16, 2008, 6:42 PM

428 High Riser package - Keith Craft on Dec 16, 2008, 8:15 PM

They are normally the small bore - Barry R on Dec 16, 2008, 8:53 PM

how big a valve? - Tom P on Dec 16, 2008, 9:12 PM

practical for 4.145" bore? - kelly on Dec 17, 2008, 5:24 AM

On the 4.08 bore strokers, what valve combination do you think? - Bill Ballinger on Dec 17, 2008, 2:14 PM

On a 4.080 - Barry R on Dec 17, 2008, 6:10 PM

Which, I was thinking the 4.25 stroke would really like that - Bill Ballinger on Dec 17, 2008, 6:16 PM

OT- C6 driveline question View Thread - Gene on Dec 16, 2008, 2:36 AM

Re: OT- C6 driveline question - Richard Dinsen on Dec 16, 2008, 5:41 AM

What he said.... I made the same mistake more than a few years back. - Beoweolf on Dec 16, 2008, 7:59 AM

Truck C6 - Rory McNeil on Dec 16, 2008, 9:33 AM

Re: Truck C6 - Gene on Dec 16, 2008, 9:45 AM

Re: Truck C6 - Rory McNeil on Dec 16, 2008, 9:55 AM

The truck driveshaft may work for - StarlinerRon on Dec 16, 2008, 6:11 PM

Do I have to dial in my bellhousing View Thread - Ian on Dec 16, 2008, 12:56 AM

Dial in bellhousings - Rick Lake on Dec 16, 2008, 3:02 AM

Dialing in? - Doug Bender on Dec 16, 2008, 3:59 AM

indexing - Jon on Dec 16, 2008, 4:13 AM

I agree - Anonymous on Dec 16, 2008, 6:36 AM

Re: Do I have to dial in my bellhousing - Bill Malone on Dec 16, 2008, 7:23 AM

Re: Do I have to dial in my bellhousing - Rory McNeil on Dec 16, 2008, 9:48 AM

Use a mirror...and also what I did - Mike U on Dec 16, 2008, 12:02 PM

I bought my '63 F-100---- - KenS on Dec 16, 2008, 12:02 PM

'68 Shop Manual - Paul Proefrock on Dec 16, 2008, 4:18 PM

Bellhousing help please?..... View Thread - Nigel on Dec 15, 2008, 8:28 PM

Re: Bellhousing help please?..... - Ray Hillebrand on Dec 15, 2008, 8:44 PM

Thankyou Ray...... - Nigel on Dec 15, 2008, 8:55 PM

Would the 67 GT500 Mustang.... - Nigel on Dec 15, 2008, 9:10 PM

A Shelby would use a regular Mustang/Fairlane bellhousing - Hawkrod on Dec 15, 2008, 9:27 PM

Thanks Hawkrod, that's a big help. n/m. - Nigel on Dec 15, 2008, 9:32 PM

Re: Thankyou Ray...... - Ray Hillebrand on Dec 16, 2008, 8:05 AM

Scales View Thread - FElony on Dec 15, 2008, 7:11 PM

Hey FELony, I bought one of these, I have had it for a week or so, it is consistent.... - winr1 on Dec 15, 2008, 7:23 PM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!