332-428 Ford FE Engine Forum (Page 7 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 21 Visitors 68FBMustang, 20 guests

Not logged in | Login | Create Account

Post Now!

390 engine idle problem? View Thread - John on Dec 13, 2008, 4:01 AM

Idle screws in, it should quit. If not, something wrong. - WerbyFord on Dec 13, 2008, 6:43 AM

Idle problem update - john on Dec 13, 2008, 11:56 AM

850 DoublePumper? Factory Jetted Rich - WerbyFord on Dec 13, 2008, 1:57 PM

RACE only VIN in So Cal View Thread - Robert Tolleson on Dec 12, 2008, 10:41 PM

Re: RACE only VIN in So Cal - Mike Lay on Dec 13, 2008, 6:11 AM

Yes, do a title only transfer and non op. It is cheap and protects you - Hawkrod on Dec 13, 2008, 6:37 AM

Thanks - Robert Tolleson on Dec 13, 2008, 6:43 AM

Re: Thanks - Bobby Spears on Dec 13, 2008, 2:07 PM

Bobby, have you tried seeing if Arizona DMV will honor the paperwork you have? It .... - Rod C on Dec 13, 2008, 7:58 PM

OT/ This has been running through my head for days View Thread - BillBallinger on Dec 12, 2008, 8:58 PM

Crap, my brain exploded! - Josh on Dec 12, 2008, 10:05 PM

OT/ This has been running through my head for days - morrkarr on Dec 12, 2008, 10:47 PM

Thank you. I appreciate it. - Bill Ballinger on Dec 13, 2008, 6:08 AM

That's nothing, with my huge brain,... - Dr. Mabuse on Dec 13, 2008, 1:31 PM

I learned alot of math working in a warehouse - Bill Ballinger on Dec 13, 2008, 1:44 PM

I think I know where I was off, there would be three Prime Gregorian - Bill Ballinger on Dec 13, 2008, 10:33 AM

You are running your brain too lean :) - Ian on Dec 13, 2008, 1:06 AM

LOL!!!!!! - Nick on Dec 13, 2008, 2:28 AM

No problem - Royce on Dec 13, 2008, 5:06 AM

I fatten 'er up, should have used the choke - Bill Ballinger on Dec 13, 2008, 6:11 AM

Oh on the engine deal, can I be there with son and a video camera? - Bill Ballinger on Dec 13, 2008, 6:32 AM

you can... but why ?? - Steve Corbin on Dec 13, 2008, 8:07 AM

But it fits so Nice - Ian on Dec 13, 2008, 10:00 AM

I always do it that way - Royce on Dec 13, 2008, 2:02 PM

you're cheating! - Heath on Dec 14, 2008, 7:43 AM

Thanks Royce - Ian on Dec 15, 2008, 5:33 PM

2 Questions..... View Thread - ford-boy on Dec 12, 2008, 8:17 PM

putting on my thinking cap - Tom P on Dec 12, 2008, 9:02 PM

Re: 2 Questions..... - e. philpott on Dec 12, 2008, 9:10 PM

Re: 2 Questions..... - Anonymous on Dec 12, 2008, 9:25 PM

FL1A Motorcraft. - StarlinerRon on Dec 12, 2008, 10:40 PM

Where does one find motorcraft FL1aHP`s? - garry on Dec 13, 2008, 3:45 AM

Garry, you can find the HP's - W.KLINE on Dec 13, 2008, 8:41 AM

Oil Filter - Mike on Dec 13, 2008, 6:42 AM

This has been around for years... - Josh on Dec 13, 2008, 7:30 AM

o/t Army Special Forces Team in Afghanistan downplays receiving ten Silver Stars. View Thread - David F. on Dec 12, 2008, 8:09 PM

Thanks, David... - Tom Delaney on Dec 13, 2008, 4:54 AM

Brave dudes !! - Steve Corbin on Dec 13, 2008, 8:13 AM

Personal friend Matt Williams - R J Sledge on Dec 15, 2008, 7:50 AM

Good news from PRI View Thread - Brian Clayton on Dec 12, 2008, 7:28 PM

Face it, - FElony on Dec 12, 2008, 7:36 PM

Punisher heads - Bob Hasty on Dec 12, 2008, 8:03 PM

storker kit? - Tom P on Dec 12, 2008, 9:10 PM

The secrets out, thats where LS1s come from - Bill Ballinger on Dec 13, 2008, 6:28 AM

Edelbrock's #1 seller was the FE head... - Dr. Mabuse on Dec 13, 2008, 1:21 PM

Edelbrock - Anonymous on Dec 13, 2008, 1:47 PM

Poor Man's Overdrive View Thread - FElony on Dec 12, 2008, 7:03 PM

OD - Ross on Dec 12, 2008, 7:08 PM

Far Out, Man! - FElony on Dec 12, 2008, 7:26 PM

interesting... I've often wondered what the limit was on those - michael on Dec 12, 2008, 8:05 PM

Granada trans - Worth, Blaine on Dec 12, 2008, 10:18 PM

Shifter Knob - Brian Clayton on Dec 12, 2008, 7:12 PM

Hot Dammm! - FElony on Dec 12, 2008, 7:19 PM

Granada 4 speed - Tom P on Dec 12, 2008, 9:17 PM

Hold on a minute...................... - RonW on Dec 12, 2008, 9:48 PM

The spread from 1st to 2nd ain't an issue with a 390............. - D hearne on Dec 12, 2008, 10:08 PM

My '82 GT - Barry Byer on Dec 12, 2008, 11:06 PM

Hmmm... - Tom Delaney on Dec 13, 2008, 4:15 AM

I agree with the "Two Toms". - Rory McNeil on Dec 13, 2008, 6:47 AM

Sounds good to me - FElony on Dec 13, 2008, 10:02 AM

If yer talk'n about a SROD trans... - Tommy-T on Dec 13, 2008, 10:19 AM

Re: If yer talk'n about a SROD trans... - FElony on Dec 13, 2008, 10:33 AM

SROD is aluminum cased with shift linkage on top of case, - Dave Eames on Dec 13, 2008, 12:12 PM

I know an Electrician who has one in an E350 van with a 300 six. He trucks around - Pippin on Dec 13, 2008, 10:00 PM

Calendar report View Thread - Bob Sprowl on Dec 12, 2008, 6:57 PM

What's NOM mean? View Thread - john on Dec 12, 2008, 5:31 PM

Nominal..... - Brent on Dec 12, 2008, 5:35 PM

It stand for - FElony on Dec 12, 2008, 5:43 PM

Nasty Old Men - refers to FE drivers.... - Jeff on Dec 12, 2008, 6:18 PM

Thk u - john on Dec 12, 2008, 7:11 PM

Re: Thk u - FElony on Dec 12, 2008, 7:38 PM

TY or ty is correct...n/m - Dr. Mabuse on Dec 13, 2008, 6:44 AM

I thought it was... - Gary B on Dec 13, 2008, 9:32 AM

More accurately - FElony on Dec 13, 2008, 10:10 AM

Kinda like the occassional sounds eminating from the....... - Rod C on Dec 13, 2008, 8:08 PM

This belongs in the classifieds... View Thread - Adam on Dec 12, 2008, 4:35 PM

define "good" - 67sedan on Dec 12, 2008, 7:04 PM

Free is always a good price..... - Brian Clayton on Dec 12, 2008, 7:28 PM

Re: Free is always a good price..... - Posford on Dec 13, 2008, 8:57 AM

tremec conversion- 70 BB stang View Thread - Steve Corbin on Dec 12, 2008, 3:24 PM

Here's a link - rcodecj Nick on Dec 12, 2008, 3:33 PM

pricing - Harry H on Dec 12, 2008, 3:48 PM

Steve, its a good move - Ross on Dec 12, 2008, 4:14 PM

crossmember - Harry H on Dec 12, 2008, 4:33 PM

Darkhorse - Ross on Dec 12, 2008, 5:58 PM

Re: tremec conversion- 70 BB stang - mike on Dec 12, 2008, 4:56 PM

Re: tremec conversion- 70 BB stang - Scode67FB on Dec 12, 2008, 6:16 PM

Looks nicer than the Darkhorse - Ross on Dec 12, 2008, 6:19 PM

hey Ross - e. philpott on Dec 12, 2008, 7:30 PM

Thats a good question - Ross on Dec 12, 2008, 7:42 PM

Hey thanks guys !! - Steve Corbin on Dec 13, 2008, 8:21 AM

Power shifting - Dsrtfox on Dec 13, 2008, 8:36 AM

2009 Forum Calendars View Thread - Bob Sprowl on Dec 12, 2008, 10:06 AM

Thanks for your work Bob, I will be ordering one as a contribution to the forum. - David F. on Dec 12, 2008, 10:46 AM

thanks Bob - Harry H on Dec 12, 2008, 1:28 PM

Very nice - Tom P on Dec 12, 2008, 1:41 PM

2009 CALENDAR - DYNO427 on Dec 12, 2008, 2:43 PM

Thanks Bob - DeWayne Lindsey on Dec 12, 2008, 3:47 PM

Hey Bob, I posted it on the Ford FE Wiki site!!!~ - Wes Adams Ford428CJ on Dec 12, 2008, 4:47 PM

Ordered Two... - Jim L on Dec 12, 2008, 6:51 PM

Ford INFO? - Mark Artis on Dec 13, 2008, 6:40 AM

Here ya go Mark................................ - Bill on Dec 13, 2008, 7:25 AM

Thanks Bill - Mark Artis on Dec 13, 2008, 7:36 AM

Thanks Bob - Dan on Dec 13, 2008, 8:32 AM

Which / whose cars are in it? n/m - Chuck Brandt on Dec 13, 2008, 2:49 PM

Looks very good ... - Mike Gaffney on Dec 13, 2008, 9:34 PM

Re: 2009 Forum Calendars - Jody Aberts on Dec 14, 2008, 1:12 PM

Does anybody remember this 67 Fairlane 427 View Thread - Frank Bowers on Dec 11, 2008, 8:40 PM

Re: Does anybody remember this 67 Fairlane 427 - derek on Dec 11, 2008, 9:46 PM

Re: Does anybody remember this 67 Fairlane 427 - Dennis Carrico on Dec 11, 2008, 11:41 PM

Dennis - Frank Bowers on Dec 12, 2008, 7:11 PM

Yes - John on Dec 12, 2008, 3:48 AM

who's car - Stephen & Horace Johnson on Dec 12, 2008, 4:13 AM

Fairlane - RWJ on Dec 12, 2008, 5:01 AM

Yes - John on Dec 12, 2008, 7:36 AM

What I know - Frank Bowers on Dec 12, 2008, 9:19 AM

10.90's in 68? - Tom P on Dec 12, 2008, 10:42 AM

Re: 10.90's in 68? - mike cannon on Dec 12, 2008, 1:07 PM

My Dads 66 Cyclone ran 10.94 with a 370 inch FE......... - Scott on Dec 12, 2008, 3:12 PM

For the record........... - Earl on Dec 12, 2008, 4:02 PM

Re: For the record........... - Bobby Spears on Dec 12, 2008, 4:41 PM

Bobby...... - Earl on Dec 12, 2008, 5:00 PM

Earl is right on. - Bob on Dec 12, 2008, 5:38 PM

Right.......... - Earl on Dec 12, 2008, 5:49 PM

Right - Bob on Dec 12, 2008, 7:47 PM

This one? - Earl on Dec 12, 2008, 8:45 PM

Re: This one? - e. philpott on Dec 12, 2008, 9:16 PM

that's it - Tom P on Dec 12, 2008, 9:29 PM

Re: This one? - Rory McNeil on Dec 12, 2008, 9:34 PM

that is the - XR7 on Dec 13, 2008, 11:08 AM

Cool photo of Bob's Fairlane... - DaleP on Dec 13, 2008, 12:19 PM

Re: Cool photo of Bob's Fairlane... - Rory McNeil on Dec 13, 2008, 3:06 PM

Those old Vailants have got to be the king of ugly cars. - Beoweolf on Dec 13, 2008, 3:51 PM

.rtfd View Thread - FElony on Dec 11, 2008, 8:33 PM

With a Mac - Carnut427 on Dec 12, 2008, 11:23 AM

Re: With a Mac - FElony on Dec 12, 2008, 11:28 AM

OK, Never Mind - FElony on Dec 12, 2008, 11:23 AM

Files - Steve on Dec 12, 2008, 11:58 AM

Re: Files - FElony on Dec 12, 2008, 4:56 PM

Napier Ring and Joe's rockers - Ross on Dec 12, 2008, 12:46 PM

Re: Napier Ring and Joe's rockers - FElony on Dec 12, 2008, 3:22 PM

Re: Napier Ring and Joe's rockers - Barry Byer on Dec 12, 2008, 3:24 PM

The added lift required different springs due to bind - Ross on Dec 12, 2008, 3:40 PM

OK - FElony on Dec 12, 2008, 4:59 PM

I'd sure agree with you there - Ross on Dec 12, 2008, 6:06 PM

Re: I'd sure agree with you there - FElony on Dec 12, 2008, 6:23 PM

Info from Joe Sherman - Ross on Dec 13, 2008, 6:18 AM

Re: Info from Joe Sherman - FElony on Dec 13, 2008, 10:26 AM

Not sure - Ross on Dec 13, 2008, 11:49 AM

Re: Not sure - FElony on Dec 13, 2008, 3:56 PM

Re: Napier Ring and Joe's rockers - Barry Byer on Dec 12, 2008, 3:23 PM

I agree - FElony on Dec 12, 2008, 5:09 PM

n/m - Rod C on Dec 12, 2008, 6:24 PM

1.93 rockers - Tom P on Dec 12, 2008, 9:37 PM

looking for pic View Thread - Tony on Dec 11, 2008, 8:05 PM

push rods 428 View Thread - Anonymous on Dec 11, 2008, 5:57 PM

Due to the stack.... - Anonymous on Dec 11, 2008, 8:07 PM

are you using - XR7 on Dec 12, 2008, 6:24 AM

Looking for bodyman View Thread - Rich on Dec 11, 2008, 5:46 PM

Re: Looking for bodyman - Anonymous on Dec 11, 2008, 6:17 PM

Bodyman in Brighton - Tony on Dec 11, 2008, 7:43 PM

Re: Looking for bodyman - Rich on Dec 12, 2008, 5:34 AM

Re: Looking for bodyman - bykpainter on Dec 12, 2008, 6:02 AM

Body Man - Roger Gordon on Dec 12, 2008, 6:32 AM

There is a shop in Highland, MI... - Jason on Dec 12, 2008, 8:10 AM

This is my stepson's place - Bob C on Dec 12, 2008, 1:11 PM

Clutch size 11" or 11.5" and fan for a 63 427 View Thread - Anonymous on Dec 11, 2008, 3:59 PM

Re: Clutch size 11" or 11.5" and fan for a 63 427 - Dave Walters on Dec 11, 2008, 4:16 PM

Re: Clutch size 11" or 11.5" and fan for a 63 427 - Dennis on Dec 11, 2008, 6:40 PM

Hey Dennis... - Dave Walters on Dec 12, 2008, 12:22 PM

fans - Gord Bradley on Dec 12, 2008, 4:15 PM

Re Fan Clutch - Dennis on Dec 13, 2008, 2:23 AM

Huh? Here is specific Ford Documentation for the '63 with fan clutch - Royce on Dec 13, 2008, 9:15 AM

Royce: Better reread the Ford info posted above yours. - Dennis on Dec 13, 2008, 12:00 PM

Here's the whole book and some other cool stuff - Royce on Dec 13, 2008, 2:06 PM

DOCUMENTION???????????? - gopher on Dec 13, 2008, 4:51 PM

I have other sources - Royce on Dec 14, 2008, 6:42 AM

royce read my lips - gopher on Dec 14, 2008, 7:32 AM

Again, just sharing what I have - Royce on Dec 14, 2008, 9:57 AM

I think this thread is digressing from the original question asked by Dave Walters - Dennis on Dec 14, 2008, 12:06 PM

Nice brochure, but it doesn't say a thing about clutch fans, or fans in general - Dennis on Dec 13, 2008, 5:14 PM

Need help from the clutch gurus! View Thread - John Kuhn on Dec 11, 2008, 3:59 PM

Re: Need help from the clutch gurus! - Dave Walters on Dec 11, 2008, 4:26 PM

John, shoot me an email, I sell clutch components.... - Brent Lykins, B2 Motorsports, LLC on Dec 11, 2008, 5:46 PM

Responce from Ford to therangerstation View Thread - Bob Hasty on Dec 11, 2008, 3:13 PM

I can understand their point of view... - Dave Walters on Dec 11, 2008, 3:54 PM

As Paul Harvey says on his radio program; "Now we know the rest of the story." - Dave Eames on Dec 11, 2008, 4:07 PM

They complain about merchandise, then say they want monery for the name! - Doug M. on Dec 11, 2008, 4:45 PM

Doug, it is obvious you are not at all familiar with the subject - Hawkrod on Dec 11, 2008, 6:20 PM

I'd argue that is the only leg they have to stand on too - Ross on Dec 11, 2008, 6:42 PM

BTW I dont agree with the perception and timing - Ross on Dec 11, 2008, 6:46 PM

The reality is somebody probably sent Ford after them - Hawkrod on Dec 11, 2008, 9:35 PM

Never thought of that, great point N/M - Ross on Dec 12, 2008, 1:57 AM

Now does any one wonder - Bob Hasty on Dec 11, 2008, 6:48 PM

The railroads figured this out, now it is Ford's turn - Gary B on Dec 11, 2008, 7:47 PM

Re: The railroads figured this out, now it is Ford's turn - Ray Hillebrand on Dec 11, 2008, 8:21 PM

My simple question - why not go after the producer? - Beoweolf on Dec 12, 2008, 6:17 AM

You're right about patents expiring, however Ford is after Trademark infringement......n/m - Rod C on Dec 12, 2008, 6:18 PM

Yes, Rod is correct, it has nothing to do with patents - Hawkrod on Dec 12, 2008, 7:53 PM

OK ... So, is a "new" 1965 Mustang Body legal or not? - Beoweolf on Dec 13, 2008, 3:37 PM

Sorry, I absolutely do not agree - Hawkrod on Dec 13, 2008, 4:17 PM

This might help clear it up. - Dave King on Dec 13, 2008, 10:26 AM

It was just Union Pacific... - Josh on Dec 11, 2008, 8:32 PM

UP set the precedent for the other railroads and not just for fallen flags - Garyford on Dec 11, 2008, 8:57 PM

I just e-mail Ford about a trademark license for FordFE.info - Bob Sprowl on Dec 13, 2008, 5:50 PM

428CJ will not idle when cold ?? View Thread - Rick on Dec 11, 2008, 2:50 PM

They were pretty much like that when new.... - Beoweolf on Dec 11, 2008, 3:03 PM

Thats a good indication its not overly rich. - Andy on Dec 11, 2008, 4:10 PM

It's just a cold blooded Ford !!!!!!!!!!!!!!!!!!! Nothing wrong - Inthegarge on Dec 11, 2008, 4:20 PM

Hot air tubes in place? - Tim O'Connor on Dec 11, 2008, 4:57 PM

What Tim said, and also about icing - - WerbyFord on Dec 11, 2008, 5:36 PM

Ditto what everyone said about the choke heat tubes and snorkel heat tube, I've driven - TonyS on Dec 12, 2008, 6:04 AM

Carburetor Icing - mrhp1 on Dec 12, 2008, 12:05 PM

Spoiled by EFI and drive-by wire electronics - Beoweolf on Dec 12, 2008, 6:09 PM

O/T '64 Marauder but...... View Thread - Bob on Dec 11, 2008, 2:17 PM

Works for me! - Beoweolf on Dec 11, 2008, 2:30 PM

How about a '61 Starliner with a FE? - Bob on Dec 12, 2008, 9:42 AM

Of course! ...even better. - Beoweolf on Dec 12, 2008, 6:18 PM

O/T Do Fog lamps actually aid in driving in thick dense fog View Thread - Cliff Harmon on Dec 11, 2008, 12:44 PM

No - Howie on Dec 11, 2008, 1:14 PM

Re: No - Bobby Spears on Dec 11, 2008, 1:40 PM

YES... - Dr. Mabuse on Dec 11, 2008, 1:49 PM

There is a better use for them than fog - Steve Roehrs on Dec 11, 2008, 2:10 PM

yes... one good reason and one great one. - Beoweolf on Dec 11, 2008, 2:19 PM

Re: yes... one good reason and one great one. - Posford on Dec 11, 2008, 4:11 PM

Talk about moths to flame... - BattlestarGalactic on Dec 12, 2008, 7:42 AM

Around here, they are only used to blind on-coming traffic. n/m - David F. on Dec 11, 2008, 2:32 PM

How about night vision goggles... - Dave Walters on Dec 11, 2008, 3:44 PM

I Live in Porterville - Tom J. on Dec 11, 2008, 5:27 PM

I think fog lights are a misnomer - 1960 Town Vic on Dec 11, 2008, 7:39 PM

Re: O/T Do Fog lamps actually aid in driving in thick dense fog - Beoweolf on Dec 12, 2008, 6:44 AM

If you need to light up the whole forest.... - Beoweolf on Dec 13, 2008, 8:06 AM

They can if they have the correct beam shape and placement... - Pippin on Dec 12, 2008, 8:45 AM

February Hot Rod mag arrives with drag week coverage View Thread - Steve Roehrs on Dec 11, 2008, 12:42 PM

Cool... - Jay Brown on Dec 11, 2008, 1:48 PM

Mine just came today...see page 88... - Dr. Mabuse on Dec 11, 2008, 2:26 PM

Trans or clutch noise View Thread - Richard on Dec 11, 2008, 10:44 AM

It is the throwout bearing - Royce on Dec 11, 2008, 11:33 AM

CLUTCH NOISE - DYNO427 on Dec 11, 2008, 11:39 AM

clutch noise - Richard on Dec 11, 2008, 12:20 PM

Re: Trans or clutch noise - Dennis on Dec 11, 2008, 11:46 AM

trans - Richard on Dec 11, 2008, 12:33 PM

Shifting.... - BattlestarGalactic on Dec 11, 2008, 12:12 PM

one more thing to check... - Dr. Mabuse on Dec 13, 2008, 12:51 PM

What would be the next best cyl. head casting View Thread - mike cannon on Dec 11, 2008, 9:09 AM

My choice - Jim Whitton on Dec 11, 2008, 9:26 AM

A little info - Bob Hasty on Dec 11, 2008, 9:29 AM

Re: A little info - mike cannon on Dec 11, 2008, 9:47 AM

Not to hijack this thread but..... - 74ford on Dec 11, 2008, 9:51 AM

Why bother? - Rory McNeil on Dec 11, 2008, 10:03 AM

Re: Why bother? - steve on Dec 11, 2008, 12:32 PM

Re: Why bother? - mike cannon on Dec 11, 2008, 1:18 PM

Re: Why bother? - mike cannon on Dec 11, 2008, 1:50 PM

Re: Why bother? - Barry Byer on Dec 11, 2008, 4:04 PM

Exhaust side - Aaron J. Benham on Dec 11, 2008, 10:08 AM

To be truthful,any FE head has an adequate exhaust up to 375-400hp - Bill Ballinger on Dec 11, 2008, 11:04 AM

Isn't the head supposed to have the original casting numbers.... - Dave Walters on Dec 11, 2008, 12:51 PM

Re: Isn't the head supposed to have the original casting numbers.... - steve on Dec 11, 2008, 1:04 PM

Right from the FAST rules ... - Dave Walters on Dec 11, 2008, 1:07 PM

Re: Right from the FAST rules ... - mike cannon on Dec 11, 2008, 1:26 PM

No problem Mike... - Dave Walters on Dec 11, 2008, 3:41 PM

re -p/n an intake - Doug Bender on Dec 11, 2008, 7:34 PM

Mike.... - Rory McNeil on Dec 11, 2008, 10:42 PM

You have three choices of castings - Royce on Dec 12, 2008, 6:50 AM

Re: What would be the next best cyl. head casting - mike cannon on Dec 12, 2008, 6:54 AM

Building and FE Engine Run In/Test Stand View Thread - Wreckless Warren on Dec 11, 2008, 7:38 AM

I like it - Robert Tolleson on Dec 11, 2008, 8:15 AM

Starting one - MeanGene on Dec 11, 2008, 8:16 AM

Re: Building and FE Engine Run In/Test Stand - Jeff Tepper on Dec 11, 2008, 8:28 AM

Easy storage disposable model - Gary B on Dec 11, 2008, 8:41 AM

Did you run this with a fan? - Warren 390 on Dec 11, 2008, 10:46 AM

How about... - BattlestarGalactic on Dec 11, 2008, 12:15 PM

Used a household fan - Gary B on Dec 11, 2008, 3:15 PM

Re: Building and FE Engine Run In/Test Stand - phil minotti on Dec 11, 2008, 9:45 AM

I'm with Gary, did this on the cheap.... - JIm on Dec 11, 2008, 10:10 AM

Outboard motor gas tank might work for fuel source ?? - winr1 on Dec 11, 2008, 10:15 AM

Yes Please Post Pictures If You Can - Wreckless Warren on Dec 11, 2008, 10:20 AM

Re: Yes Please Post Pictures If You Can - phil minotti on Dec 11, 2008, 4:36 PM

Thanks For The Picture and What A Beautiful Engine - Wreckless Warren on Dec 11, 2008, 5:41 PM

Re: Thanks For The Picture and What A Beautiful Engine - phil minotti on Dec 11, 2008, 5:53 PM

Stumpy's thoughts... - Jim on Dec 11, 2008, 1:44 PM

Here's the one I built - Mike Burch on Dec 12, 2008, 2:37 PM

Looks Very Efficent - Wreckless Warren on Dec 12, 2008, 3:58 PM

Original 427 Fairlane exhaust manifold value??? View Thread - Bob Sprowl on Dec 11, 2008, 6:30 AM

pretty close - larry renne on Dec 11, 2008, 7:15 AM

sure but beware of fakes - Tom P on Dec 11, 2008, 4:48 PM

Re: Original 427 Fairlane exhaust manifold value??? - Brian Clayton on Dec 11, 2008, 5:53 PM

Re: Help with Valves View Thread - Anonymous on Dec 11, 2008, 6:12 AM

Check with Engbldr - RJP on Dec 11, 2008, 10:49 AM

2009 FE Callender ??? View Thread - Jody Aberts on Dec 11, 2008, 6:08 AM

I expect to fininsh it tonight - if all goes well. - Bob Sprowl on Dec 11, 2008, 6:24 AM

Thanks - Jody Aberts on Dec 11, 2008, 6:37 AM

Can you post a sample? - Cliff Harmon on Dec 11, 2008, 8:23 AM

View online - Doug Bender on Dec 11, 2008, 8:58 AM

the garage wall is waiting n/m - Jim Wysocki on Dec 12, 2008, 8:57 AM

Please repost this in the classifieds - Thanks n/m View Thread - Gary Rovere on Dec 11, 2008, 4:27 AM

oil pump driveshaft View Thread - Scott on Dec 11, 2008, 3:47 AM

I have some NOS shafts. E-mail me your address and I'll send you one, if you wish......n/m - Rod C on Dec 11, 2008, 3:56 AM

8.620" - Doug Garifo on Dec 11, 2008, 12:58 PM

cyl. head identifaction? View Thread - jack b fuche on Dec 11, 2008, 1:24 AM

CYL HEAD I.D. - DYNO427 on Dec 11, 2008, 2:52 AM

C3AE 6090 C heads - Rich Ferguson on Dec 11, 2008, 3:21 AM

c3ae-6090 heads - jack b fuche on Dec 11, 2008, 9:07 AM

factory spring cups - 406 - kelly on Dec 11, 2008, 4:30 AM

Yes, that number was used on two different heads - Hawkrod on Dec 11, 2008, 7:26 AM

Intro and question View Thread - Scott on Dec 10, 2008, 9:34 PM

Balancing - Ross on Dec 10, 2008, 9:38 PM

Balance - RWJ on Dec 11, 2008, 5:03 AM

I have done that same thing RWJ~ - Wes Adams Ford428CJ on Dec 11, 2008, 5:20 AM

flexplate - Steve Corbin on Dec 11, 2008, 5:33 AM

opps - Scott on Dec 11, 2008, 7:55 AM

Wrong!... - Dr. Mabuse on Dec 13, 2008, 12:19 PM

Help with diff carrier I.D please? View Thread - Nigel on Dec 10, 2008, 8:50 PM

It's a Detroit Locker, Nigel. n/m - Tom Delaney on Dec 10, 2008, 8:57 PM

Thanks Tom! n/m. - Nigel on Dec 10, 2008, 9:11 PM

nigel that locker is 10X stronger than a Tlock - chris on Dec 11, 2008, 4:50 AM

Thanks for response Chris! n/m. - Nigel on Dec 11, 2008, 7:46 PM

Okay, I have grown stupid, please help (Holley Question) View Thread - Nathan on Dec 10, 2008, 8:42 PM

Wait until field grade, then you really lose your mind - Ross on Dec 10, 2008, 9:23 PM

One comment - Ross on Dec 10, 2008, 9:41 PM

Sent you an e-mail. . . - Nathan on Dec 10, 2008, 10:34 PM

Sent you one back - Ross on Dec 11, 2008, 6:36 AM

Are you absolutly sure the secondary plates are closed - Ray Hillebrand on Dec 11, 2008, 8:59 AM

The right metering plate. . . - Nathan on Dec 11, 2008, 12:18 PM

WOW Hat's OFF to Brian Clayton......A Work of Art !!!!!!! View Thread - Canadian-FE on Dec 10, 2008, 7:48 PM

You have to give credit where credit is due... - Brian Clayton on Dec 10, 2008, 9:02 PM

re Original Valve Cover - 427Kevin on Dec 11, 2008, 3:39 AM

move over Cammerfe Cammer49 coming in View Thread - Bill Orrick on Dec 10, 2008, 6:38 PM

Cumon Bill.... - KenS on Dec 10, 2008, 7:46 PM

Kens. looks like new cammer parts are taking over - Bill Orrick on Dec 11, 2008, 2:53 PM

And just think.... - KenS on Dec 11, 2008, 10:10 PM

But, don't you cammer guys want to pay.... - Bob on Dec 12, 2008, 6:52 AM

I've only ever used a few.... - KenS on Dec 12, 2008, 9:13 AM

Re: I've only ever used a few.... - F570rd on Dec 12, 2008, 11:51 AM

It's only.... - KenS on Dec 12, 2008, 8:47 PM

Hey John Vermeersch... View Thread - Brian Clayton on Dec 10, 2008, 6:17 PM

another - Tom P on Dec 10, 2008, 7:17 PM

Hummm..... Looks Subtle :-) N/M - Nathan on Dec 10, 2008, 10:18 PM

What's the motivation to have it here? - FERoadster on Dec 10, 2008, 10:24 PM

Re: What's the motivation to have it here? - Brian Clayton on Dec 11, 2008, 5:58 PM

Ed Lavender - Jody Aberts on Dec 11, 2008, 4:23 AM

Re: Ed Lavender - Brian Clayton on Dec 11, 2008, 5:56 PM

Snow in Houston View Thread - Big John on Dec 10, 2008, 5:50 PM

Houston... - Tom P on Dec 10, 2008, 5:54 PM

Going back to Houston, Houston, Houssstooon! - Bob on Dec 10, 2008, 6:09 PM

Snowing here in Friendswood, Big John is right about Houstonians not knowing how to..... - winr1 on Dec 10, 2008, 6:26 PM

Ice age caused by global climate change!!!!!! - Royce on Dec 10, 2008, 6:24 PM

Lol at Bob and Royce... - winr1 on Dec 10, 2008, 6:27 PM

Yeah, and all caused by cow farts,lol........................n/m - RonW on Dec 10, 2008, 6:41 PM

He knows what to do... - Terry on Dec 11, 2008, 6:58 AM

Like they say... - Scott66gta on Dec 10, 2008, 6:41 PM

So basically... - Tom P on Dec 10, 2008, 7:31 PM

no problem here - dablack on Dec 11, 2008, 6:00 AM

Very good article on global warming - Anonymous on Dec 12, 2008, 9:27 AM

I may be asking a silly question. View Thread - Chris on Dec 10, 2008, 5:12 PM

Somebody beat you to it - Brian Clayton on Dec 10, 2008, 5:15 PM

Doesn't seem like it would be that hard to do yourself. Would it be worth the effort? - Chris on Dec 10, 2008, 5:18 PM

Yes - Brian Clayton on Dec 10, 2008, 5:22 PM

Re: Yes - 68xl on Dec 10, 2008, 6:07 PM

Mopar-design Top Fuel.... - KenS on Dec 10, 2008, 5:47 PM

What is general consensus on sleeves in a block? Ok or Avoid it? View Thread - Chris S. on Dec 10, 2008, 3:58 PM

Here we go again... - Dave Walters on Dec 10, 2008, 4:15 PM

Re: What is general consensus on sleeves in a block? Ok or Avoid it? - Bobby Spears on Dec 10, 2008, 4:16 PM

No problems here. - Rory McNeil on Dec 10, 2008, 5:09 PM

sleeves - DYNO427 on Dec 10, 2008, 5:13 PM

8 sleeves in a 427 - Ross on Dec 10, 2008, 9:45 PM

Back in the day - steve meyer on Dec 10, 2008, 5:48 PM

406 - 427Kevin on Dec 10, 2008, 6:32 PM

My first 427 was .60 over in all eight cylinderss when I first bought it. - Cliff Harmon on Dec 10, 2008, 6:58 PM

We had eight sleeves put in a 427 block - Brian Clayton on Dec 10, 2008, 7:03 PM

Some 428 CJ racers used to sleeve all 8 on a new block for the tougher metal and... - hollis franks on Dec 10, 2008, 7:55 PM

No problem IF it's done right... - Randy Millard on Dec 10, 2008, 8:47 PM

Step - 427Kevin on Dec 11, 2008, 3:43 AM

Thanks to all for your responses, and the education. - Chris S. on Dec 11, 2008, 5:58 AM

*My nickel.... - engnbldr on Dec 11, 2008, 1:08 PM

Cooling ? View Thread - Bob P. on Dec 10, 2008, 1:47 PM

Here is a hodge-podge of info that leans towards an electric fan setup - bbr60 on Dec 10, 2008, 2:50 PM

Water Pump - Dan W on Dec 10, 2008, 2:57 PM

Stay away from flex fans... - Dave Walters on Dec 10, 2008, 3:04 PM

The way I understand it - Bob C on Dec 10, 2008, 3:26 PM

Re: The way I understand it - Bob P. on Dec 10, 2008, 4:23 PM

Thermal clutch with the wound spring on the front always lasted a lot longer than the.... - winr1 on Dec 10, 2008, 5:06 PM

flex for me - Tom P on Dec 10, 2008, 5:32 PM

Found!: Old CC fan dyno test results: - Bob on Dec 10, 2008, 6:08 PM

I'm with you, Bob... - Scott66gta on Dec 10, 2008, 6:44 PM

That was an eye opener... - Josh on Dec 10, 2008, 7:53 PM

Seems to answer 2 unasked question about these High horsepower 4 and 6 cylinder engines to - Beoweolf on Dec 11, 2008, 8:39 AM

Yes...... - Bob on Dec 11, 2008, 8:57 AM

You are partly right... - Tommy-T on Dec 11, 2008, 9:23 AM

Yep - Bill Ballinger on Dec 11, 2008, 11:25 AM

What temp sensor do you use? - Josh on Dec 11, 2008, 3:04 PM

for what its worth - Bob C on Dec 11, 2008, 4:43 PM

Cat C-15 cycles at 215 degrees n/m - Josh on Dec 11, 2008, 5:48 PM

I dont know how you guys do it. I have never... - Andy on Dec 11, 2008, 1:50 PM

I have about six years.... - KenS on Dec 12, 2008, 9:06 PM

c-6 converter suggestions View Thread - Steve Corbin on Dec 10, 2008, 12:37 PM

Try Jay at Broader Perfomance n/m - Jonny D. on Dec 10, 2008, 12:54 PM

I second the Broader Performance suggestion... - JC DeSaveur on Dec 10, 2008, 2:05 PM

You should be able to purchase a reasonably price stock stall convertor - Dave Eames on Dec 10, 2008, 4:34 PM

In the Northwest - FElony on Dec 10, 2008, 4:50 PM

Converter pilot issues... - Richard Dinsen on Dec 10, 2008, 6:01 PM

couple of choices - e. philpott on Dec 10, 2008, 7:15 PM

Re: c-6 converter suggestions - Dennis on Dec 10, 2008, 8:15 PM

Converter- Target Torque Converters - Rich Mastro on Dec 10, 2008, 8:28 PM

Thanks all ! appreciate the feedback! - Steve Corbin on Dec 11, 2008, 5:55 AM

i'm running a 3500 tci with no problems in my daily driver - Kyle on Dec 11, 2008, 9:09 AM

TCI Runout - Anthony on Dec 11, 2008, 1:26 PM

I wouldn't take a Total Crap Industries converter for free. - Barry Gaugler on Dec 11, 2008, 5:07 PM

I am not a big fan of TCI either, Broader's stuff is nice - Bill Ballinger on Dec 12, 2008, 8:53 PM

Victor Intake Gaskets View Thread - Anthony on Dec 10, 2008, 12:09 PM

Ask Nathan "jaimalade" - Howie on Dec 10, 2008, 7:14 PM

Car Quest in Yucca Valley, CA. . . - Nathan on Dec 10, 2008, 7:39 PM

Rocker Shafts... View Thread - *QTRHRSE* on Dec 10, 2008, 11:25 AM

Not sure... - BattlestarGalactic on Dec 11, 2008, 8:55 AM

well.... - XR7 on Dec 12, 2008, 9:30 AM

steering wheel color 64 galaxie View Thread - chille on Dec 10, 2008, 11:14 AM

Check here - Tim Maloney on Dec 10, 2008, 11:46 AM

Dearborn Classics... - Dave Walters on Dec 10, 2008, 3:08 PM

Anyone got an email address for cleandan? View Thread - Larry Hampton on Dec 10, 2008, 11:08 AM

Try this........ - F570rd on Dec 10, 2008, 11:17 AM

Not a valid address..... :( - Larry Hampton on Dec 10, 2008, 12:50 PM

Old address. I'll email you a new one. - Dave Shoe on Dec 10, 2008, 3:07 PM

Got it, called him and he gave me a new email address... - Larry Hampton on Dec 10, 2008, 3:43 PM

Okay, Victor rather than Fel-Pro. . . Question View Thread - Nathan on Dec 10, 2008, 8:54 AM

Re: Okay, Victor rather than Fel-Pro. . . Question - Ray Hillebrand on Dec 10, 2008, 9:35 AM

Vacuum wipers are old school!...n/m - Dr. Mabuse on Dec 12, 2008, 2:08 PM

I seal the crap out of them - Royce on Dec 10, 2008, 9:45 AM

right stuff - David Ventura on Dec 10, 2008, 11:22 AM

I smear.... - Brent on Dec 10, 2008, 9:51 AM

Re: Okay, Victor rather than Fel-Pro. . . Question - Gasket fit on Dec 10, 2008, 3:03 PM

Ditto on the.... - KenS on Dec 10, 2008, 5:31 PM

YOU MUST - Howie on Dec 10, 2008, 7:06 PM

Big name - steve meyer on Dec 10, 2008, 7:29 PM

Re: Big name - Rory McNeil on Dec 10, 2008, 9:40 PM

Good post... - Bob on Dec 11, 2008, 9:17 AM

A great match for the new billet cylinder heads... View Thread - Dave Walters on Dec 10, 2008, 8:02 AM

Hogan's has a - Bob on Dec 10, 2008, 8:11 AM

Re: Hogan's has a - Dave Walters on Dec 10, 2008, 8:19 AM

..."drag racing manifolds"... n/m - Dr. Mabuse on Dec 10, 2008, 1:38 PM

Re: A great match for the new billet cylinder heads... - Brian Clayton on Dec 10, 2008, 4:55 PM

Are these billets - FElony on Dec 10, 2008, 5:10 PM

Nope - Brian Clayton on Dec 10, 2008, 5:15 PM

Re: Nope - FElony on Dec 10, 2008, 5:31 PM

Much better.... - Brian Clayton on Dec 10, 2008, 5:39 PM

Re: Much better.... - FElony on Dec 10, 2008, 5:45 PM

Now we need a billet FE block like one of these to.... - Bob on Dec 10, 2008, 6:21 PM

Re: Now we need a billet FE block like one of these to.... - Brian Clayton on Dec 10, 2008, 6:26 PM

Billet 427 block - Anonymous on Dec 11, 2008, 8:24 AM

Thanks! - Bob on Dec 11, 2008, 9:08 AM

Re: Billet 427 block - Brian Clayton on Dec 11, 2008, 6:03 PM

Re: A great match for the new billet cylinder heads... - Dave Walters on Dec 11, 2008, 4:05 PM

interesting piece - Tom P on Dec 11, 2008, 4:38 PM

Re: interesting piece - Brian Clayton on Dec 11, 2008, 6:01 PM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!