332-428 Ford FE Engine Forum (Page 16 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 24 Visitors 68FBMustang, 23 guests

Not logged in | Login | Create Account

Post Now!

Tommy-T View Thread - Ross on Nov 19, 2008, 11:31 AM

Hats off to Doug @ Precision Oil Pumps View Thread - mike cannon on Nov 19, 2008, 11:09 AM

Doug - Gene on Nov 19, 2008, 4:41 PM

O T..but maybe of some interest to the racers on the forum View Thread - Tbolt on Nov 19, 2008, 10:29 AM

Cool, but..... - Bob on Nov 19, 2008, 11:50 AM

interesting - Tom P on Nov 19, 2008, 12:40 PM

sent pictures some View Thread - jack b fuche on Nov 19, 2008, 10:13 AM

sent pictures? - jack fuche on Nov 21, 2008, 7:34 PM

what kind of oil should I use in my 390 FE View Thread - nick on Nov 19, 2008, 8:37 AM

If you are running a flat tappet cam, that will drive your oil decisions. n/m - David F. on Nov 19, 2008, 9:11 AM

Never use synthetic for break in or assembly - Royce on Nov 19, 2008, 9:12 AM

Oils........... - BattlestarGalactic on Nov 19, 2008, 9:20 AM

assembly - Tom V on Nov 19, 2008, 9:39 AM

Re: assembly - John on Nov 19, 2008, 11:14 AM

Joe Gibbs Break-in oil - Marty Burke on Nov 19, 2008, 1:47 PM

assembly - jack b fuche on Nov 20, 2008, 4:51 PM

I think there is a myth about synthetic oil... - Dave Walters on Nov 19, 2008, 2:07 PM

Apples and maybe oranges! - Bob on Nov 19, 2008, 2:44 PM

I agree with you 100% - Dave Walters on Nov 19, 2008, 4:37 PM

Re: Apples and maybe oranges! - Rich Ferguson on Nov 19, 2008, 5:04 PM

Re: what kind of oil should I use in my 390 FE - John on Nov 19, 2008, 3:49 PM

My answer? - Bob on Nov 19, 2008, 5:12 PM

Re: My answer? - Anonymous on Nov 19, 2008, 7:09 PM

FWIW, my daily driver.... - KenS on Nov 19, 2008, 7:37 PM

Most motorcycles are built that way... - Josh on Nov 19, 2008, 9:51 PM

Don't do it - Barry R on Nov 20, 2008, 4:37 AM

Barry, - Dave Walters on Nov 20, 2008, 5:51 AM

Why would anyone want to do that????? - Royce on Nov 20, 2008, 9:08 AM

Some very interesting.... - Bob on Nov 20, 2008, 6:25 AM

Unless something has changed.... - Beoweolf on Nov 20, 2008, 8:23 AM

Thats the truth, draining it immediately after run in is important - Bill Ballinger on Nov 20, 2008, 11:22 AM

True that.... - Bob on Nov 20, 2008, 12:31 PM

Ring designs - Barry R on Nov 20, 2008, 8:15 AM

Thanks.... - Bob on Nov 20, 2008, 9:37 AM

I agree with Marty and Barry R.............................. - Blair Patrick on Nov 20, 2008, 8:45 PM

We all have different opinions about synthetics... - Anonymous on Nov 21, 2008, 6:02 AM

Re: We all have different opinions about synthetics... - Anonymous on Nov 21, 2008, 10:01 AM

Re: We all have different opinions about synthetics... - Anonymous on Nov 21, 2008, 10:03 AM

Looking to improve the output of my 427 View Thread - Mark on Nov 19, 2008, 5:13 AM

first the cam..... - Cal on Nov 19, 2008, 5:34 AM

Yes, I believe it is the original cam from the 60's - Mark on Nov 19, 2008, 7:12 AM

O/T What kind of Rod is this in? Pictures? N/M - Ray J. on Nov 19, 2008, 7:07 AM

The car's away having bodywork/paint - Mark on Nov 19, 2008, 7:32 AM

What improvement do you want to see? - Ross on Nov 19, 2008, 7:43 AM

Re: Looking to improve the output of my 427 - WerbyFord on Nov 19, 2008, 7:46 AM

Werby, gonk something for me will you? - Ross on Nov 19, 2008, 7:56 AM

12� advanced? - Brent on Nov 19, 2008, 8:02 AM

Yes indeed - Ross on Nov 19, 2008, 8:06 AM

Most definitely check intake valve clearance on that one... - Brent on Nov 19, 2008, 8:11 AM

Thanks Brent, but a comment - Ross on Nov 19, 2008, 8:32 AM

Didn't mean to make it sound like an emergency..... - Brent on Nov 19, 2008, 8:51 AM

A loose timing chain can throw the cam timing off 8� retarded - Bill Ballinger on Nov 19, 2008, 11:07 AM

Once I advanced my Cammer Pinto a whole tooth. - WerbyFord on Nov 19, 2008, 8:27 AM

Werby, my cam figures... - Ross on Nov 19, 2008, 8:34 AM

I specifically want to boost low end torque, but some top end would be nice... - Mark on Nov 19, 2008, 8:17 AM

Do this first - straightedge on the valve retainers - - WerbyFord on Nov 19, 2008, 8:38 AM

My opinion - Ross on Nov 19, 2008, 8:40 AM

Dude, yer scare'n me... - Tommy-T on Nov 19, 2008, 9:04 AM

And I thought you found my wandering diatribes useful - Bill Ballinger on Nov 19, 2008, 10:24 AM

Never claimed I was normal :) - Ross on Nov 19, 2008, 11:19 AM

If your talk'n REALLY cheap... - Tommy-T on Nov 19, 2008, 8:51 AM

The carb baseplates were worn - Mark on Nov 19, 2008, 9:02 AM

My 2 cents: Have the dizzy recurved, all in, 38*, at 2,300rpm. Jet the carbs to 68 ....... - Rod C on Nov 19, 2008, 9:29 AM

couple things... - Tom P on Nov 19, 2008, 10:03 AM

Distributor has been recurved - Mark on Nov 19, 2008, 12:16 PM

Hey..... - Bob on Nov 19, 2008, 12:48 PM

Several years ago.... - KenS on Nov 19, 2008, 8:01 PM

I like the solid roller suggestion very much - Mark on Nov 19, 2008, 10:23 PM

O/T Importance of a fuel regulator? View Thread - Doug Bender on Nov 19, 2008, 5:04 AM

First he needs a good fuel pressure guage - Dave Walters on Nov 19, 2008, 6:10 AM

Dry set the float? - Doug Bender on Nov 19, 2008, 7:24 AM

what pump - donwight on Nov 19, 2008, 6:33 AM

Info - Doug Bender on Nov 19, 2008, 7:18 AM

probably not a pressure issue - donwight on Nov 19, 2008, 8:33 AM

Time to pull the bowls.. - BattlestarGalactic on Nov 19, 2008, 7:15 AM

Good point - Doug Bender on Nov 19, 2008, 7:23 AM

When checking the floats..... - Bob on Nov 19, 2008, 7:29 AM

Something I did once was not getting the little clip on the float - Bill Ballinger on Nov 20, 2008, 5:51 PM

Floats.. - BattlestarGalactic on Nov 19, 2008, 9:28 AM

Check for crud in the needle/seat - RobbMc on Nov 19, 2008, 8:32 AM

have had floats go bad - chris on Nov 19, 2008, 9:41 AM

hey i'm going to be at cecil with my truck! - Kyle on Nov 19, 2008, 12:56 PM

I'll look for you - Doug Bender on Nov 19, 2008, 1:15 PM

o-rings - jon on Nov 19, 2008, 6:15 PM

4 Speed Inspection Cover View Thread - Tim Rossol on Nov 18, 2008, 10:45 PM

re inspec. cover - john tolliver on Nov 19, 2008, 5:54 AM

There are very minor variations in them - Hawkrod on Nov 19, 2008, 7:23 AM

FORD c6 FORUM View Thread - 427Howard on Nov 18, 2008, 10:10 PM

ask and ye shall receive - robert on Nov 18, 2008, 10:24 PM

Re: ask and ye shall receive - 427Howard on Nov 18, 2008, 10:53 PM

Re: ask and ye shall receive - 427Howard on Nov 18, 2008, 10:54 PM

BLOCKED!! - 427Howard on Nov 18, 2008, 10:55 PM

Blocked? - Doug Bender on Nov 19, 2008, 3:46 AM

Works as designed - Doug Bender on Nov 19, 2008, 3:56 AM

Blocked,DOUG, - Howard on Nov 19, 2008, 9:42 AM

Lokar Oil Dipstick View Thread - Graeme on Nov 18, 2008, 9:02 PM

Lokar - Jesse Williams on Nov 19, 2008, 6:59 AM

Mock up motor in place View Thread - Alan Casida on Nov 18, 2008, 7:17 PM

FE 1960 352 HP camshaft specifications? View Thread - Mike on Nov 18, 2008, 6:17 PM

Re: FE 1960 352 HP camshaft specifications? - ford-boy on Nov 18, 2008, 7:45 PM

re: specs - 427Kevin on Nov 18, 2008, 7:52 PM

Dec 1960 Hot Rod says 352/360 and 390/375 same cam - WerbyFord on Nov 18, 2008, 8:17 PM

"Ford Performance Handbook" - Greg on Nov 18, 2008, 9:01 PM

Re: "Ford Performance Handbook" - ford-boy on Nov 19, 2008, 8:29 AM

My 60 had blue springs with one piece retainers - Bobby Spears on Nov 19, 2008, 9:09 AM

Gas Ronda and his black 1960 Starliner - Anonymous on Nov 19, 2008, 4:52 PM

Bobby... - Tom P on Nov 20, 2008, 3:12 PM

Interesting!! - Anonymous on Nov 19, 2008, 4:54 PM

Thanks! - Anonymous on Nov 19, 2008, 4:55 PM

Milodon Oil Pan View Thread - Mike Ratterree on Nov 18, 2008, 4:51 PM

You have it correct... - Richard Dinsen on Nov 18, 2008, 4:57 PM

Re: Milodon Oil Pan - Jim on Nov 18, 2008, 7:44 PM

The stock type pan calls for - DaleP on Nov 18, 2008, 8:44 PM

Video View Thread - RWJ on Nov 18, 2008, 4:27 PM

Awesome sound with that vid Wayne!!.................. - RonW on Nov 18, 2008, 4:37 PM

Very cool .... - Mike Gaffney on Nov 18, 2008, 5:02 PM

Sounds and looks great! n/m - Doug S on Nov 18, 2008, 6:05 PM

YES - DragBoss on Nov 18, 2008, 7:58 PM

very nice!! - Tom P on Nov 18, 2008, 10:53 PM

Engine - RWJ on Nov 19, 2008, 5:10 AM

......drool............... - BattlestarGalactic on Nov 19, 2008, 7:21 AM

Pretty cool, Wayne... - Jay Brown on Nov 19, 2008, 5:49 AM

428 CJ intake ports View Thread - Gary on Nov 18, 2008, 4:15 PM

CJ intake - Joe D. Craine on Nov 18, 2008, 6:35 PM

428CJ intakes - Keith Craft on Nov 18, 2008, 10:09 PM

Re: 428CJ intakes - Gary on Nov 19, 2008, 1:08 PM

O/T UAW / Democrats won't like this article. View Thread - Kerry Johnson on Nov 18, 2008, 2:15 PM

People who want to f*ck the working man probably won't like this - Bill Ballinger on Nov 18, 2008, 2:59 PM

ex-Ford spokesman Jason Vines... - 427Kevin on Nov 18, 2008, 3:02 PM

All I can say is AMEN! - Bill Ballinger on Nov 18, 2008, 3:53 PM

bridge loan, not a 'bailout' - Cal on Nov 18, 2008, 4:17 PM

There is plenty of blame to go around, - Bill Ballinger on Nov 18, 2008, 4:46 PM

The big three - Anonymous on Nov 18, 2008, 4:06 PM

BAILOUT????? o/t and long - gopher on Nov 18, 2008, 4:14 PM

Business - RWJ on Nov 18, 2008, 4:35 PM

Obama has an application... - Kerry Johnson on Nov 18, 2008, 4:50 PM

I think you are much smarter than the folks running GM - Bill Ballinger on Nov 18, 2008, 5:11 PM

Just a few facts about the Big 3's legacy/overhead costs. By 2010 any UAW employee....... - Rod C on Nov 18, 2008, 7:46 PM

Thanks for sharing the Ford info. Something you wrote - James H on Nov 18, 2008, 10:42 PM

I've been there - Bob C on Nov 19, 2008, 5:23 AM

It's a yearly bonus at contract time. The more days you're absent the less the bonus...... - Rod C on Nov 19, 2008, 7:58 AM

Anyone have anything but emotions? - Kerry Johnson on Nov 18, 2008, 4:30 PM

Yeah, a Toyota. We tried to buy a Ford or Chevy truck - Pippin on Nov 18, 2008, 4:50 PM

Re: Anyone have anything but emotions? - John on Nov 18, 2008, 4:55 PM

Yes I do and I am glad you asked - Bill Ballinger on Nov 18, 2008, 5:02 PM

Makes sense to me... - Kerry Johnson on Nov 18, 2008, 5:51 PM

Everyone in that organization has to grasp that when the ship goes down - Bill Ballinger on Nov 18, 2008, 6:19 PM

Bill of GM CEO! - Kerry Johnson on Nov 18, 2008, 6:35 PM

I wish I could get back in the game - Bill Ballinger on Nov 18, 2008, 6:43 PM

What about consulting? - Kerry Johnson on Nov 18, 2008, 6:51 PM

I would like that, for the love of the game as much as the money - Bill Ballinger on Nov 19, 2008, 6:14 AM

Is it true that Toyota and Honda factories are not union? - James H on Nov 18, 2008, 10:51 PM

50% of US car production is non union and non Ford / GM . Chrysler - Royce on Nov 19, 2008, 6:03 AM

Running either shop is possible, it just takes a mindset that we are all in this together - Bill Ballinger on Nov 19, 2008, 6:39 AM

Bill, I hear you and for the most part I agree with you, but.... - David F. on Nov 19, 2008, 7:17 AM

Toyota's Tundra is not doing so fine either, even after building it's second...... - Rod C on Nov 19, 2008, 8:10 AM

Rod, just to clarify, I'm not ready to get rid of my F-150. As long as... - David F. on Nov 19, 2008, 9:00 AM

One of the magazines said the Tundra was better than the F150 - Royce on Nov 19, 2008, 9:10 AM

Ford clearly builds the best truckss on the market???? - Kerry Johnson on Nov 19, 2008, 10:50 AM

I drive a 2006 Dodge 2500 Cummins - Royce on Nov 19, 2008, 11:36 AM

NO ONE should be FORCED to join a union, JMO..........n/m - Rod C on Nov 19, 2008, 8:00 AM

I agree, but the union culture should not be a hindrance to productivity - Bill Ballinger on Nov 19, 2008, 10:20 AM

In my experience - Bob C on Nov 19, 2008, 1:04 PM

There's a modified version of your options - James H on Nov 18, 2008, 10:48 PM

Reaping what we sow - gary B on Nov 18, 2008, 5:31 PM

Anyone watch the C-span Senate Hearings? It give a different perspective! - Pippin on Nov 19, 2008, 12:25 AM

cant they get the money from Mexico? - kelly on Nov 19, 2008, 5:25 AM

The stooge from Chrysler is living on his Home Depot golden parachute.n/m - bbr60 on Nov 19, 2008, 11:01 AM

Mitt says Chapter 11 is only hope... - Kerry Johnson on Nov 19, 2008, 7:12 AM

They would get rid of a huge portion of their pension/healthcare liability... - David F. on Nov 19, 2008, 7:34 AM

I hate to see the retirees take a hit too.... - Kerry Johnson on Nov 19, 2008, 7:51 AM

Does anyone - Bob C on Nov 19, 2008, 1:12 PM

They are not backed at full value, but I'm not sure if it is so low as to.... - David F. on Nov 19, 2008, 3:11 PM

Let me re-phrase - Bob C on Nov 19, 2008, 3:15 PM

Definitely pennies on the dollar - Bill Ballinger on Nov 20, 2008, 11:35 AM

There's a fix, but it can't be done...........(long) - Bill Tebbutt on Nov 19, 2008, 10:16 AM

Stop the crap - 1960 Town Vic on Nov 19, 2008, 6:54 PM

Are you a communist? - Bill Ballinger on Nov 19, 2008, 7:26 PM

Bill.. Let me be the first to say... - DaleP on Nov 19, 2008, 7:51 PM

I nearly choked on my hamburger... - Tommy-T on Nov 19, 2008, 8:11 PM

Just leave the breedin' stock for last, more tender and juicier.......n/m - Rod C on Nov 20, 2008, 4:41 AM

I'd be scheming on Compton if you don't want anything that doesn't taste like goat - Bill Ballinger on Nov 20, 2008, 10:46 AM

See I told you I was worth entertainment value - Bill Ballinger on Nov 20, 2008, 5:35 AM

Furrin car owners just won't admit - StarlinerRon on Nov 19, 2008, 9:44 PM

I am just dazzled by your brilliance and your eloquence - 1960 Town Vic on Nov 19, 2008, 10:23 PM

Yeah I know. - Bill Ballinger on Nov 20, 2008, 4:37 AM

happy to be back in the fold View Thread - jack b fuche on Nov 18, 2008, 2:05 PM

Skinny - RWJ on Nov 18, 2008, 4:39 PM

Please share some more... - Richard Dinsen on Nov 18, 2008, 4:55 PM

need help lrarn how to post pictures - jack b fuche on Nov 18, 2008, 5:45 PM

Re: need help lrarn how to post pictures - Richard Dinsen on Nov 18, 2008, 6:19 PM

Same Skinny from Barhops - john vermeersch on Nov 18, 2008, 6:50 PM

Hey Skinny!!...Welcome!! - winr1 on Nov 18, 2008, 7:23 PM

yes john same skinny - jack b fuche on Nov 19, 2008, 5:37 AM

Did you know a Ford guy by the name of Nelson. Ran a black 63 406....... - Rod C on Nov 19, 2008, 8:20 AM

did you know nelsondrove63 406 - jack b fuche on Nov 19, 2008, 5:26 PM

I bought "TWISTIN TIME" - john vermeersch on Nov 19, 2008, 6:12 PM

twisting time - jack b fuche on Nov 20, 2008, 5:16 PM

intake gaskets View Thread - russell on Nov 18, 2008, 2:05 PM

Yes - Howie on Nov 18, 2008, 5:09 PM

hot air ports blocked - jack b fuche on Nov 18, 2008, 6:05 PM

Maybe a dumb question - John on Nov 18, 2008, 7:46 PM

Here is why you should block the heat x-over... - Dr. Mabuse on Nov 20, 2008, 6:22 PM

Dr Mabuse heat cross over - John on Nov 20, 2008, 9:28 PM

common problem... - Anonymous on Nov 21, 2008, 1:17 PM

Napa crossed those numbers - Aaron J. Benham on Nov 19, 2008, 11:44 PM

felpro - John on Nov 20, 2008, 9:53 AM

More Info, Lots of pics warning - Howie on Nov 20, 2008, 2:35 PM

Howie has ya covered with the part #'s, n/m - John on Nov 20, 2008, 6:04 PM

427 Marine Engines...AGAIN View Thread - Mach428 on Nov 18, 2008, 1:13 PM

Pull the water pump. - Dave Shoe on Nov 18, 2008, 1:51 PM

heat exchanger - Jon on Nov 18, 2008, 2:12 PM

chris craft - Jon on Nov 18, 2008, 2:29 PM

'66 Galaxie Motor mount question View Thread - Bob Sprowl on Nov 18, 2008, 12:00 PM

Re: '66 Galaxie Motor mount question - Richard Dinsen on Nov 18, 2008, 4:12 PM

Photo of the mounts - Bob Sprowl on Nov 19, 2008, 7:00 PM

OT/ '06 V10 F250 5 speed auto trans View Thread - Bill Ballinger on Nov 18, 2008, 11:23 AM

faulty eletronics... - Dr. Mabuse on Nov 20, 2008, 6:12 PM

I was wondering about that - Bill Ballinger on Nov 21, 2008, 4:46 AM

?tion how rare are 332 blocks View Thread - Jaymz on Nov 18, 2008, 11:05 AM

rarity - Tom P on Nov 18, 2008, 11:16 AM

thanx i guess ill just keep it - Jaymz on Nov 18, 2008, 11:19 AM

could be real rare - Roberson on Nov 18, 2008, 2:32 PM

ill check in to that - Jaymz on Nov 18, 2008, 3:07 PM

Re: ill check in to that - Roberson on Nov 18, 2008, 6:33 PM

I would check the cylinder wall thickness - Bob Hasty on Nov 18, 2008, 2:34 PM

Probably someone restoring a 58 or 59 - StarlinerRon on Nov 19, 2008, 9:56 PM

Super low mile Tasca Mustang uncovered View Thread - Alan Casida on Nov 18, 2008, 10:21 AM

Darn! And here I thought...... - Bob on Nov 18, 2008, 10:37 AM

I was hoping it was this one at the 65 world finals. - Bobby Spears on Nov 18, 2008, 11:07 AM

Re: I was hoping it was this one at the 65 world finals. - Jody Aberts on Nov 18, 2008, 11:27 AM

Great picture Bobby.... - Dave Walters on Nov 18, 2008, 11:42 AM

Cool A/FX Mustang site here: - Bob on Nov 18, 2008, 11:51 AM

Wow, very cool. - Tom P on Nov 18, 2008, 2:42 PM

No real.... - Bob on Nov 18, 2008, 3:04 PM

Attn Tom - Re: Wow, very cool. - Dennis on Nov 23, 2008, 4:32 AM

Not behind,we are staging and I got a huge hadicap - Bobby Spears on Nov 18, 2008, 4:06 PM

427 Id View Thread - Gerry on Nov 18, 2008, 9:26 AM

The Cougar GT-E blocks are side oilers - Royce on Nov 18, 2008, 10:00 AM

nice car - Jaymz on Nov 18, 2008, 11:03 AM

His engine sounds so similar - Dean Forster on Nov 18, 2008, 10:17 AM

Re: His engine sounds so similar - Royce on Nov 18, 2008, 10:54 AM

sounds like... - Tom P on Nov 18, 2008, 11:00 AM

I should know better - john vermeersch on Nov 18, 2008, 11:02 AM

More too add to Toms - john vermeersch on Nov 18, 2008, 11:12 AM

I.D. Tag info - Dean Forster on Nov 18, 2008, 11:33 AM

Re: I.D. Tag info - Royce on Nov 18, 2008, 5:11 PM

good info - DEAN FORSTER on Nov 18, 2008, 6:37 PM

Re: good info - Royce on Nov 19, 2008, 4:24 AM

Thanks for all the info - DEAN FORSTER on Nov 19, 2008, 5:56 PM

O/T Model A ......... advice needed View Thread - Joe Sullivan on Nov 18, 2008, 8:45 AM

The ideal garage has an "A" on one side and an "FE" on the other - WerbyFord on Nov 18, 2008, 9:54 AM

12 volt conversion is easy - Royce on Nov 18, 2008, 10:11 AM

Here is a site of 6 and 12 volt options to confuse or amuse - bbr60 on Nov 18, 2008, 10:40 AM

Thanks for the info everyone....Werby... - Joe Sullivan on Nov 18, 2008, 12:08 PM

Yes that's right on the timing. Spare distrib? - WerbyFord on Nov 18, 2008, 1:38 PM

Werby......Its starting to come back now............. - Joe Sullivan on Nov 18, 2008, 3:07 PM

OK LOL here is a Gonkulated Model "A" - WerbyFord on Nov 18, 2008, 8:26 PM

Thanks Werby ...........I 'll get some pic's of the 37 HP beast an post them N/M - Joe Sullivan on Nov 19, 2008, 6:38 AM

Water leaks - Royce on Nov 19, 2008, 7:54 AM

Thanks Royce .......Wow those are pricey! - Joe Sullivan on Nov 19, 2008, 10:32 AM

I have many fond memories of my Model A - 68GT500 on Nov 18, 2008, 12:52 PM

Nope.... I got ot at a swap meet ... - Joe Sullivan on Nov 18, 2008, 1:14 PM

You turn the rod clockwise to lean the.. - 68GT500 on Nov 18, 2008, 10:58 PM

Thanks Mike I'll give it a try and let you know how it worked n/m - Joe Sullivan on Nov 19, 2008, 6:40 AM

So much fun - Tom C on Nov 19, 2008, 2:34 PM

late 1931? - Dale on Nov 19, 2008, 6:14 PM

Re: late 1931? - Tom C on Nov 19, 2008, 7:27 PM

O/T 66 Fairlane Interior Paint View Thread - David J on Nov 18, 2008, 8:09 AM

Interior paint - Bob Mosher on Nov 18, 2008, 12:57 PM

question re. use of exhaust manifold gaskets View Thread - big t on Nov 18, 2008, 5:22 AM

No gaskets.... - Dave Walters on Nov 18, 2008, 5:32 AM

A thin layer - Bob Hasty on Nov 18, 2008, 9:01 AM

Thanks I'll give it a try - big t on Nov 18, 2008, 10:30 AM

JAY BROWN Dragweek View Thread - Anthony on Nov 18, 2008, 4:56 AM

Post of SOHC Rocker Arm Failure Test analysis conclusion: - Pippin on Nov 18, 2008, 8:58 AM

O/T PRI show, Orlando View Thread - RWJ on Nov 18, 2008, 3:31 AM

O/T LOL/sad? Speak softly and carry a Big Flowerpot! View Thread - qikBBstang on Nov 18, 2008, 1:45 AM

Interesting .... - Mike Gaffney on Nov 18, 2008, 4:41 AM

Re: Interesting .... - Ray Hillebrand on Nov 18, 2008, 8:38 AM

All is not well in China - Barry Byer on Nov 18, 2008, 8:48 AM

nukes and... - Tom P on Nov 18, 2008, 11:06 AM

T-85 View Thread - Royce Brechler on Nov 17, 2008, 10:47 PM

Re: T-85 - Don Woodruff on Nov 18, 2008, 3:56 AM

T-85 info form hemmins news below. - Richard Winters on Nov 18, 2008, 9:40 AM

T-85 - hoss on Nov 18, 2008, 11:09 AM

62 was last yr for 3sp but, - StarlinerRon on Nov 19, 2008, 10:12 PM

C3AE heads View Thread - Todd on Nov 17, 2008, 10:37 PM

Re: C3AE heads - Rich Ferguson on Nov 18, 2008, 3:05 AM

The full casting number.. - Todd on Nov 18, 2008, 4:10 AM

C3AE 6090 C heads - Rich Ferguson on Nov 18, 2008, 4:56 AM

C3ae-C - Aaron J. Benham on Nov 18, 2008, 5:22 AM

The C heads are a good head... - Dave Walters on Nov 18, 2008, 5:10 AM

Yes if you want 10.5cr. I'd skip the hard seats though. - WerbyFord on Nov 18, 2008, 7:10 AM

Re: C3AE heads - Ray Hillebrand on Nov 18, 2008, 8:46 AM

61cc, that is VERY small, I think mine were about 66cc - WerbyFord on Nov 18, 2008, 10:07 AM

Thanks for the info - Todd on Nov 18, 2008, 10:40 PM

9" center sections View Thread - Worth, Blaine on Nov 17, 2008, 6:54 PM

DO IT!!!!~ - Wes Adams Ford428CJ on Nov 17, 2008, 6:58 PM

just use a plain 4 pinion... - Dr. Mabuse on Nov 18, 2008, 4:40 AM

Tare it down and see if you can just stuff in a new clutch packs - qikBBstang on Nov 18, 2008, 7:19 AM

1967 Mustang Headers for Sideoiler !!! Help !!!!!! View Thread - Rick on Nov 17, 2008, 5:41 PM

try FPA - chris on Nov 17, 2008, 5:46 PM

My favorite is 6114 Hookers - Ross on Nov 17, 2008, 6:04 PM

Also Crites~ - Wes Adams Ford428CJ on Nov 17, 2008, 6:24 PM

Hookers - Frank Bowers on Nov 17, 2008, 8:53 PM

GO TO PAGE 2 .... - LivermoreDave on Nov 18, 2008, 3:10 AM

FPA Headers fit like a glove - Steve on Nov 20, 2008, 7:24 AM

O/T Non fe flywheel id View Thread - John on Nov 17, 2008, 5:31 PM

windsor - fordsel on Nov 17, 2008, 5:37 PM

How new is new - John on Nov 17, 2008, 7:20 PM

1981 or so... - Barry Byer on Nov 18, 2008, 9:01 AM

Thanks....N/M - John on Nov 18, 2008, 5:23 PM

flywheel - john on Nov 19, 2008, 3:14 AM

O/T Where to get Holley gaskets quick? View Thread - Doug Bender on Nov 17, 2008, 3:31 PM

Re: O/T Where to get Holley gaskets quick? - Greg on Nov 17, 2008, 3:49 PM

try summit or jegs but $$$$ shipping - chris on Nov 17, 2008, 3:49 PM

napa carries them.......... - johannarich. on Nov 17, 2008, 3:58 PM

My local O'Really store actually stocked the Holley kits. - Ray Hillebrand on Nov 17, 2008, 4:07 PM

Advance - Tom on Nov 17, 2008, 5:06 PM

One of our many local Checker Auto Stores have a HP parts section. - Dave Shoe on Nov 17, 2008, 5:09 PM

O/T whats the best way to do M.O.'s on eBay? View Thread - Dave Walters on Nov 17, 2008, 3:11 PM

You can't require MO's for payment if that is what you are asking.... - Hawkrod on Nov 17, 2008, 3:45 PM

I don't want to require MO's.... - Dave Walters on Nov 17, 2008, 3:53 PM

You can't openly say that you will accept anything but electronic payments - Hawkrod on Nov 17, 2008, 4:10 PM

No dont want to do that either... - Dave Walters on Nov 17, 2008, 4:26 PM

Yes, that you can do. - Hawkrod on Nov 17, 2008, 5:20 PM

Thanks for the info Hawkrod! - Dave Walters on Nov 18, 2008, 5:12 AM

Re: O/T whats the best way to do M.O.'s on eBay? - Wreckless Warren on Nov 17, 2008, 3:49 PM

i think jan/09 is when no more m/o or checks - chris on Nov 17, 2008, 3:54 PM

I can tell you how bad money orders are being counterfeited - Ray Hillebrand on Nov 17, 2008, 4:10 PM

Good heads up...thanks - Dave Walters on Nov 17, 2008, 4:27 PM

I had 2 lately - Bob Hasty on Nov 17, 2008, 5:20 PM

New type M.O. at the P.O. - Tim O'Connor on Nov 17, 2008, 6:37 PM

Chris, electronic payments are already required, it is other changes waiting until Jan N/M - Hawkrod on Nov 17, 2008, 5:21 PM

thanks hawkrod haven't list on ebay in long time - chris on Nov 17, 2008, 5:39 PM

M/O OK - John on Nov 17, 2008, 5:39 PM

Your just flying under the radar - Hawkrod on Nov 17, 2008, 6:09 PM

Hey John - Dsrtfox on Nov 17, 2008, 6:13 PM

I don't think you can even bid on ebay... - Rich Ferguson on Nov 18, 2008, 3:32 AM

ebay is the devil lol - Jaymz on Nov 18, 2008, 11:00 AM

I guess Jay Browns burning the midnight oil and afternoon dyno time getting The FE Book View Thread - qikBBstang on Nov 17, 2008, 2:32 PM

Good for him. Time well spent! N/M - Irv on Nov 17, 2008, 2:51 PM

HEY JAY BROWN - Howard on Nov 17, 2008, 3:11 PM

Any way to use View Thread - john vermeersch on Nov 17, 2008, 1:38 PM

Actually..... - Bob on Nov 17, 2008, 1:43 PM

supposedly still available from Gene Berg... - T on Nov 17, 2008, 2:39 PM

That must be a rare piece... - jim carlson on Nov 17, 2008, 2:40 PM

somebody does - Tom P on Nov 17, 2008, 3:18 PM

another place - Tom P on Nov 17, 2008, 3:26 PM

How many cubes do you want to feed? - 68GT500 on Nov 17, 2008, 10:21 PM

John... - Dave Walters on Nov 18, 2008, 5:59 AM

O/T: The provenance/paperwork trail is now complete for my LWG. Today I received......... View Thread - Rod C on Nov 17, 2008, 1:25 PM

Rod C that stuff is always cool to see n/m - qikBBstang on Nov 17, 2008, 2:15 PM

Congrats Rod that's very cool.... - Glenn on Nov 17, 2008, 4:15 PM

Re: O/T: The provenance/paperwork trail is now complete for my LWG. Today I received......... - son of RodC on Nov 17, 2008, 5:33 PM

Watch out youngster...... - Tony P. on Nov 18, 2008, 4:19 AM

OT Body mounts (metal washers and bushings) for 1966 Galaxie.. View Thread - Ed Jenkins on Nov 17, 2008, 12:16 PM

body mounts - Tom V on Nov 18, 2008, 9:41 AM

what block is this? View Thread - csx4068 on Nov 17, 2008, 11:23 AM

what is the bore size????? - Mike U. on Nov 17, 2008, 12:06 PM

4.23 - csx4068 on Nov 17, 2008, 12:43 PM

Has to be a 427 - Bobby Spears on Nov 17, 2008, 1:20 PM

Re: Has to be a 427 - csx4068 on Nov 17, 2008, 1:27 PM

The engineering changes to get to a "U" suffix may not have actually made it.......... - Rod C on Nov 17, 2008, 1:32 PM

Because the lists are made-up!... - Dr. Mabuse on Nov 17, 2008, 1:33 PM

FE block castings had meaning through 1963. - Dave Shoe on Nov 17, 2008, 5:19 PM

Could your "U" be a "V"? - Dave Walters on Nov 17, 2008, 2:54 PM

seems likely - kelly on Nov 17, 2008, 5:04 PM

"R" Code Idler Arm View Thread - Joe on Nov 17, 2008, 11:06 AM

Rare Parts makes it... - Richard Dinsen on Nov 17, 2008, 11:36 AM

Moog & TWR Idler Kits - Terry on Nov 17, 2008, 1:32 PM

very cool - 427Kevin on Nov 17, 2008, 5:36 PM

Moog - Terry on Nov 18, 2008, 7:13 AM

OT..R.I.P.---DHL View Thread - Tbolt on Nov 17, 2008, 9:24 AM

R.I.P DHL - Myrl Morris on Nov 17, 2008, 10:04 AM

Re: OT..R.I.P.---DHL - Ray Hillebrand on Nov 17, 2008, 10:08 AM

DHL Hired the bravest Pilots - Bob J on Nov 17, 2008, 1:40 PM

DHL and a Royal Screw Job - qikBBstang on Nov 17, 2008, 2:28 PM

My crank - Tom on Nov 17, 2008, 5:04 PM

DHL isnt going anywhere.... - Sohcbob on Nov 17, 2008, 6:51 PM

I don't want to see anyone lose their Job, but DHL .... - Cliff Harmon on Nov 17, 2008, 7:51 PM

DHL - RWJ on Nov 18, 2008, 3:45 AM

hey lost my old account but i am back View Thread - Jaymz on Nov 17, 2008, 9:05 AM

Welcome back .... - Mike Gaffney on Nov 17, 2008, 9:34 AM

SWEET! - Howard on Nov 17, 2008, 3:16 PM

sorry it is not for sale - Jaymz on Nov 17, 2008, 11:02 PM

OT: I don't think my t-bird could do this! View Thread - Timothy on Nov 17, 2008, 8:33 AM

nice - Jaymz on Nov 17, 2008, 9:13 AM

Same thought crossed my mind ... - Mike Gaffney on Nov 17, 2008, 9:48 AM

Can it do this on repro 7 inch redline tires - steve on Nov 17, 2008, 11:00 AM

I would like to know how you do that. - Tom J. on Nov 18, 2008, 7:59 PM

Best driving I have ever seen - Tim Krause on Nov 17, 2008, 4:11 PM

That's my daily commute, I live in Philly, PA. N/M - TCH on Nov 18, 2008, 3:52 PM

OT:Add Me To The List Of Folks Pissed At PayPal View Thread - Wreckless Warren on Nov 17, 2008, 8:02 AM

Re: OT:Add Me To The List Of Folks Pissed At PayPal - mike cannon on Nov 17, 2008, 8:36 AM

Me Too, Add Me To The List Of Folks Pissed At PayPal - Tom C on Nov 17, 2008, 8:42 AM

Times are changing - Bob Hasty on Nov 17, 2008, 9:20 AM

PayPal verification - SSdynosaur on Nov 17, 2008, 9:20 AM

I'll join you - Bob C on Nov 17, 2008, 10:19 AM

Paypal/Government - Joe on Nov 17, 2008, 10:57 AM

Personally I hope your right about local swap meets... - Dave Walters on Nov 17, 2008, 2:42 PM

i don't think it IRS but state sales tax - chris on Nov 17, 2008, 5:57 PM

PayPal/IRS/StateTax don't make sense. Joe sells his used boat, his used car & his Granny's - qikBBstang on Nov 18, 2008, 7:35 AM

PayPal: "Stupid eBay users Pay No-Attention to the man behind the curtain" n/m - qikBBstang on Nov 18, 2008, 7:40 AM

A bit OT but no one at Ford dealer would help (f250) View Thread - Bob Singbiel on Nov 17, 2008, 7:11 AM

Are you asking if the weight would exceed GVWR? - Timothy on Nov 17, 2008, 7:40 AM

I,ve looked at payloads & towing--- - Bob Singbiel on Nov 17, 2008, 8:26 AM

Re: A bit OT but no one at Ford dealer would help (f250) - r on Nov 17, 2008, 8:37 AM

FWIW... - john vermeersch on Nov 17, 2008, 9:24 AM

new engine View Thread - Steve Corbin on Nov 17, 2008, 7:00 AM

yes, n/m - Bob Hasty on Nov 17, 2008, 7:13 AM

Re: new engine - Wreckless Warren on Nov 17, 2008, 8:07 AM

I keep an old cruseo bell - Bob Hasty on Nov 17, 2008, 9:23 AM

questions about 1965 p/u with 352 fe View Thread - npoitra on Nov 17, 2008, 6:45 AM

Fewer surprises trailering vs. driving. - bbr60 on Nov 17, 2008, 7:43 AM

nice - Jaymz on Nov 17, 2008, 8:05 AM

Re: questions about 1965 p/u with 352 fe - r on Nov 17, 2008, 8:39 AM

I would .... - Mike Gaffney on Nov 17, 2008, 9:09 AM

Hi, npoitra, nice find!!!.........checkout our 61 to 66 truck club... - winr1 on Nov 17, 2008, 9:58 AM

To change the subject, Mike thats a nice place there - Bill Ballinger on Nov 17, 2008, 6:58 PM

205 hp 327 lbs ft of torque. Indestructible if you do a few things before you drive it. - Bill Ballinger on Nov 17, 2008, 6:53 PM

My two cents - j.frank on Nov 18, 2008, 2:33 PM

<< Prev

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!