332-428 Ford FE Engine Forum (Page 21 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 28 Visitors BillBallinger120, qikbbstang, 26 guests

Not logged in | Login | Create Account

Post Now!

OT Any Florida events around Thanksgiving? View Thread - Doug S on Nov 5, 2008, 10:01 AM

Re: OT Any Florida events around Thanksgiving? - George Vega on Nov 5, 2008, 10:22 AM

Turkey Run Daytona Beach Thanksgiving Weekend - Rusty Gillis on Nov 5, 2008, 12:05 PM

Orlando - RWJ on Nov 6, 2008, 4:04 AM

Are you driving there? - Jim on Nov 6, 2008, 4:21 AM

We are flying.... - Doug S on Nov 6, 2008, 9:38 AM

Just watch the wacky drivers and the traffic jams in Orlando - qikBBstang on Nov 7, 2008, 1:54 PM

More on smoking Fe View Thread - Bob P. on Nov 5, 2008, 8:58 AM

Which kind of seal? - BattlestarGalactic on Nov 5, 2008, 12:55 PM

Re: Which kind of seal? - Bob P. on Nov 5, 2008, 1:23 PM

Yes.... - BattlestarGalactic on Nov 6, 2008, 6:20 AM

Valve Seals - Anthony on Nov 5, 2008, 1:44 PM

What is an Alum. T-10 Transmission Worth??? View Thread - Todd on Nov 5, 2008, 7:01 AM

Re: What is an Alum. T-10 Transmission Worth??? - Dennis on Nov 5, 2008, 8:35 AM

There was one on ebay about 2-3 months ago... - Dave Walters on Nov 5, 2008, 8:45 AM

My '64 Custom R came.... - KenS on Nov 5, 2008, 1:23 PM

New, Not Rebuilt !!!! View Thread - Daryl on Nov 5, 2008, 5:33 AM

Yeah...new like my sister, - john vermeersch on Nov 5, 2008, 5:49 AM

Factory paint marks AND factory leaky timing cover!!! <nm> - SteveR on Nov 5, 2008, 5:53 AM

i got a response from him. its funny - David Ventura on Nov 5, 2008, 7:19 AM

heres the responce I got. - Bob Hasty on Nov 5, 2008, 7:22 AM

AND here is the response i got!..................#$%^&*?? - Pippin on Nov 5, 2008, 9:49 PM

He's wrong on the "60s" oil thing. I've got a low mileage original 289.... - David F. on Nov 5, 2008, 8:09 AM

Guys am I missing something those are "Two-Piece-Retainers" - qikBBstang on Nov 5, 2008, 8:22 AM

Re: Guys am I missing something those are "Two-Piece-Retainers" - Rory McNeil on Nov 5, 2008, 9:46 AM

Vanilla 428s did get stamped 2-piece retainers. - Dave Shoe on Nov 5, 2008, 10:57 AM

The rings and bearings... - Bob on Nov 6, 2008, 10:04 AM

Got one just like it - Anonymous on Nov 5, 2008, 1:29 PM

Check the new pictures - MeanGene on Nov 7, 2008, 6:55 AM

soild lifters on hydro cam View Thread - matt on Nov 5, 2008, 2:38 AM

Call Comp Cams and ask them - Royce on Nov 5, 2008, 4:00 AM

I did it once, worked for 1200 miles, then broke a spring - WerbyFord on Nov 5, 2008, 6:18 AM

Um, but why? It will make the cam act like a 256* ... - Pippin on Nov 5, 2008, 6:22 AM

I wouldn't call Comp, I'd call Barry or Keith... - Brent on Nov 5, 2008, 8:30 AM

Oil feed to the rocker gear on Edelbrocks View Thread - Jim on Nov 4, 2008, 9:53 PM

Thats what I did. - Royce on Nov 5, 2008, 2:14 AM

schneider cam? View Thread - nick on Nov 4, 2008, 8:16 PM

cams - Frank Druse Jr on Nov 4, 2008, 8:35 PM

Schneider Reground a cam for me few years back - paul metzgar on Nov 4, 2008, 9:40 PM

Schneider cam use - Anonymous on Nov 5, 2008, 1:40 PM

shell lifters/ ISKY View Thread - Jon on Nov 4, 2008, 7:59 PM

yes and no. - Pippin on Nov 4, 2008, 11:03 PM

Rusty Gillis has posted some pictures of my project start View Thread - dedom on Nov 4, 2008, 7:17 PM

1936 and other Stainless Steel Fords View Thread - qikBBstang on Nov 4, 2008, 6:51 PM

They are still around Detroit - Barry R on Nov 4, 2008, 8:42 PM

Actually the dies used were the last,,,,,,, - garry on Nov 5, 2008, 3:47 AM

nhra national record holder View Thread - kirk on Nov 4, 2008, 6:15 PM

Very Cool!!! - XR7 on Nov 4, 2008, 8:44 PM

congrats - Anonymous on Nov 5, 2008, 5:47 AM

Congrats Stewart !!! - winr1 on Nov 5, 2008, 7:15 AM

Thanks! - Stuart Goertzen on Nov 5, 2008, 10:47 AM

Nice Job!!!! - Royce on Nov 5, 2008, 2:30 PM

stocker - Stephen & Horace Johnson on Nov 5, 2008, 7:44 PM

heads - Stuart Goertzen on Nov 5, 2008, 8:55 PM

yea, i know the feeling........... - Stephen & Horace Johnson on Nov 5, 2008, 9:30 PM

How about some wheels up pics. - Scott on Nov 6, 2008, 8:17 AM

I'll try - Stuart Goertzen on Nov 6, 2008, 10:35 AM

are you - XR7 on Nov 6, 2008, 11:53 AM

clutch - Stuart Goertzen on Nov 6, 2008, 4:36 PM

? on pricing a motor View Thread - jim smith jr on Nov 4, 2008, 6:10 PM

Lowriser .... - Mike Gaffney on Nov 5, 2008, 4:37 AM

Re: Lowriser .... - John on Nov 5, 2008, 9:05 AM

2wd Truck headers... View Thread - Josh on Nov 4, 2008, 5:20 PM

Re: 2wd Truck headers... - Pete on Nov 4, 2008, 7:47 PM

Re: 2wd Truck headers... - Rory McNeil on Nov 4, 2008, 9:56 PM

Doug Thorley - John on Nov 4, 2008, 10:20 PM

I have the used the dynomax and the hedmans in my '76... - Cody Ladowski on Nov 5, 2008, 5:10 AM

I like Hedmans the best on the pickups - Ross on Nov 5, 2008, 5:20 AM

Re: I like Hedmans the best on the pickups - Rory McNeil on Nov 5, 2008, 9:55 AM

Re: I like Hedmans the best on the pickups - DeWayne Lindsey on Nov 5, 2008, 1:40 PM

Is that the Hooker Super Comps? - Josh on Nov 5, 2008, 2:58 PM

re:2wd truck headers - jim smith jr on Nov 5, 2008, 10:35 PM

Oil Pan Baffling & trap doors View Thread - Paul on Nov 4, 2008, 5:02 PM

Mustang 428 Cobra Jet Registry - Tim Rossol on Nov 4, 2008, 5:11 PM

Re: Oil Pan Baffling & trap doors - Jay Zolko on Nov 4, 2008, 5:33 PM

Bolts? - Paul on Nov 4, 2008, 6:15 PM

Re bolts - Joe on Nov 4, 2008, 7:28 PM

Re: Bolts? - Jay Zolko on Nov 5, 2008, 3:33 PM

Paul give some thought about going with an aftermarket or custom pan made by Pan Prof's - qikBBstang on Nov 4, 2008, 7:58 PM

Grit your teeth and.... - KenS on Nov 5, 2008, 6:47 AM

Anyone ever try the Edelbrock Performer RPM Cam? View Thread - Danny on Nov 4, 2008, 4:40 PM

rpm cam - Len on Nov 4, 2008, 5:49 PM

I liked mine... - Jay Brown on Nov 4, 2008, 6:18 PM

Totally agree - Royce on Nov 5, 2008, 2:18 AM

Re: RPM Cam - Bill Howard on Nov 4, 2008, 6:47 PM

Re: Anyone ever try the Edelbrock Performer RPM Cam? - Danny on Nov 5, 2008, 5:29 AM

You really ought to consider the Comp 282S - SteveR on Nov 5, 2008, 5:57 AM

or if you want to keep a hydro xe-274 - Kyle on Nov 5, 2008, 12:38 PM

Kyle, how does the car idle with that cam? <nm> - SteveR on Nov 5, 2008, 7:58 PM

Rec'd an email from Jim...Jackie is in the recovery View Thread - Scrap Iron on Nov 4, 2008, 4:03 PM

Good to hear ... - Mike Gaffney on Nov 5, 2008, 4:48 AM

Yes!!...Good to hear - winr1 on Nov 5, 2008, 1:56 PM

Sema EFI,s View Thread - Gord Bradley on Nov 4, 2008, 3:47 PM

WTHAYTA - Craig Mitchell on Nov 4, 2008, 6:33 PM

ditto...and no one has a camera? "picture is worth a 1,000 words" - JMO on Nov 4, 2008, 6:47 PM

photo - Tom P on Nov 4, 2008, 7:42 PM

Has anyone used one of these frame rail pieces? View Thread - Scott on Nov 4, 2008, 3:35 PM

Ive thought about cutting those in half lengthwise and using that to add additional - qikBBstang on Nov 4, 2008, 4:58 PM

O/T Ford 9" N case date verification? I picked up a 31 spine chunk View Thread - Pippin on Nov 4, 2008, 3:25 PM

3B12 = 1973, Feb 12 - Royce on Nov 4, 2008, 3:49 PM

thanks, any idea of what it came from? PU maybe? n/m - Pippin on Nov 4, 2008, 4:00 PM

Truck vs Car N-Case The tale I've heard is Muscle Car Nodulars - qikBBstang on Nov 4, 2008, 4:51 PM

Re: Truck vs Car N-Case The tale I've heard is Muscle Car Nodulars - Rory McNeil on Nov 4, 2008, 5:05 PM

Truck - Barry Byer on Nov 4, 2008, 6:09 PM

Hmmm, caps are similar to my 3.00 open case i guess - Pippin on Nov 4, 2008, 7:59 PM

Not having an N on the caps does not mean anything - Hawkrod on Nov 4, 2008, 8:30 PM

That makes sense, - Pippin on Nov 4, 2008, 10:27 PM

Yup! - Barry Byer on Nov 4, 2008, 8:38 PM

Website Link - Terry on Nov 5, 2008, 5:17 AM

Where is the best place to get a clutch kit and rebuilt parts for a 9" trac-loc? - Pippin on Nov 5, 2008, 6:48 AM

Ford Racing use to offer clutch packs cheaper then Ford Dealers on a great discount - qikBBstang on Nov 5, 2008, 8:28 AM

ok. n/m - Pippin on Nov 5, 2008, 10:04 PM

Steel Fuel Line View Thread - LanceH on Nov 4, 2008, 12:00 PM

Tubing - SSdynosaur on Nov 4, 2008, 1:08 PM

I can get it here in Detroit - Barry R on Nov 4, 2008, 1:52 PM

Where do you get it from? - LanceH on Nov 4, 2008, 2:02 PM

Re: Steel Fuel Line - Anonymous on Nov 4, 2008, 2:51 PM

Check the weight of the fuel - john vermeersch on Nov 4, 2008, 3:53 PM

John I'm surprised you made that statement...... Had a customer in maintenance that went - qikBBstang on Nov 4, 2008, 5:09 PM

Not likely that you'll need.... - KenS on Nov 4, 2008, 7:33 PM

could you do that? - Kyle on Nov 5, 2008, 12:28 PM

You would install fuel pressure regulators before the carb or carbs n/m - Josh on Nov 5, 2008, 4:04 PM

Any local industrial/hydraulic supply dealer...n/m - Dr. Mabuse on Nov 4, 2008, 5:00 PM

Try Annealing it - John on Nov 4, 2008, 8:25 PM

Or braze steel fittings to the ends, if.... - KenS on Nov 5, 2008, 10:21 PM

Found this on yearones site. View Thread - Scott on Nov 4, 2008, 11:33 AM

I'd say there's going to be a increased demand in 69/70 donors - qikBBstang on Nov 4, 2008, 12:41 PM

428 CJ twist on breather caps for aluminum finned valve covers View Thread - Roger Gordon on Nov 4, 2008, 11:26 AM

http://www.deadnutson.com/page/page/2961786.htm - Hawkrod on Nov 4, 2008, 11:41 AM

So do cast Cast Valve Covers only accept "Special" breathers?... Thicker then steel ? - qikBBstang on Nov 4, 2008, 12:45 PM

Nope, it is the same cap for any valve cover N/M - Hawkrod on Nov 4, 2008, 1:36 PM

cap - scf100 on Nov 4, 2008, 1:18 PM

He specifically noted he was looking for the correct repro N/M - Hawkrod on Nov 4, 2008, 1:36 PM

The one from Dead Nuts is not a repro, its a restored original - Royce on Nov 4, 2008, 3:28 PM

410 truck engine - Roger Gordon on Nov 4, 2008, 5:29 PM

O/T 1952 Flathead Color? View Thread - Kerry Johnson on Nov 4, 2008, 11:03 AM

Not Chevy Orange... - Rex on Nov 4, 2008, 11:44 AM

Flathead Color - Kerry Johnson on Nov 4, 2008, 1:46 PM

Dad bought a new '53 Ford Crestliner - Royce on Nov 5, 2008, 2:11 AM

Re: O/T 1952 Flathead Color? - Tom C on Nov 4, 2008, 1:38 PM

Flathead Color - Kerry Johnson on Nov 4, 2008, 1:48 PM

Was red for merc? I recall orange or green - WerbyFord on Nov 4, 2008, 3:55 PM

shows what I know... - Rex on Nov 4, 2008, 4:15 PM

Our family '53 Merc.... - KenS on Nov 4, 2008, 7:38 PM

It is NOT Ford red! or chevy orange! - StarlinerRon on Nov 5, 2008, 3:58 AM

My '50 is "bronze" - Timothy on Nov 5, 2008, 10:04 AM

Mickey Thompson Mustang View Thread - Scott on Nov 4, 2008, 10:08 AM

Mickey Thompson Mustang - Mike Gray on Nov 4, 2008, 10:17 AM

Send the pics... - Barry Byer on Nov 4, 2008, 2:05 PM

Cheap FE Rods View Thread - Richard Dinsen on Nov 4, 2008, 9:44 AM

Offhand, they look to be.... - KenS on Nov 4, 2008, 10:17 AM

Re: Offhand, they look to be.... - George Vega on Nov 4, 2008, 1:22 PM

They are RPM - Barry R on Nov 4, 2008, 2:04 PM

Re: They are RPM - Richard Dinsen on Nov 4, 2008, 2:32 PM

I have a set on my bench - Mike on Nov 4, 2008, 4:49 PM

My machinist said you ALWAYS torque to ARP specs then re-size - Pippin on Nov 4, 2008, 10:58 PM

thats interesting - Kyle on Nov 5, 2008, 12:34 PM

We throught about resizing also - Mike Jones on Nov 5, 2008, 2:26 PM

'Flash'....anyone that need an MSD box cheap, call View Thread - Scrap Iron on Nov 4, 2008, 9:32 AM

What is the part number on that? - Tim Rossol on Nov 4, 2008, 9:53 AM

prt # is msd 7220... - John F Richmond on Nov 4, 2008, 10:48 AM

MSD ..... - Mike Gaffney on Nov 4, 2008, 11:05 AM

I called Kragen in Clovis, CA and they are $585.99 - Tim Rossol on Nov 4, 2008, 11:07 AM

Price from Kragens...just logged on to my ATech acct. - Scrap Iron on Nov 4, 2008, 1:18 PM

MSD 7AL - ZARTT on Nov 5, 2008, 10:10 AM

MSD 7AL is cheaper at Summit - Royce on Nov 5, 2008, 10:15 AM

FE cylinder head flow info.... View Thread - Dave Walters on Nov 4, 2008, 9:01 AM

I.... - Bob on Nov 4, 2008, 2:18 PM

it looks like Stan has updated his site recently - e. philpott on Nov 4, 2008, 4:23 PM

COAE head cc's on a 1960 352? View Thread - Pippin on Nov 4, 2008, 8:39 AM

COAE-6090-D heads - Rich Ferguson on Nov 4, 2008, 9:02 AM

Yeah, he needs to know the whole number, there are different C0AE heads. N/M - Hawkrod on Nov 4, 2008, 9:42 AM

COAE-6090-C, Not 64cc, can tell you that, but - Pippin on Nov 4, 2008, 9:53 AM

COAE heads - SSdynosaur on Nov 4, 2008, 10:39 AM

My book shows 72-75.8 for the "C" heads, 60-62 for the "D"s (HP)............n/m - Rod C on Nov 4, 2008, 1:38 PM

thanks, that looks right, closer to the 75. the 30* seats - Pippin on Nov 4, 2008, 3:05 PM

HiPippin, a guy is selling 428 CJ valves on ebay and says the intakes are 30 degree seats. - winr1 on Nov 5, 2008, 9:04 AM

new edelbrock dual quad FE manifold View Thread - davis on Nov 4, 2008, 8:01 AM

Re: new edelbrock dual quad FE manifold - Jody Aberts on Nov 4, 2008, 8:20 AM

Tunnel Wedge - Jim on Nov 4, 2008, 8:26 AM

Here's the previous discussion - Tim Rossol on Nov 4, 2008, 8:28 AM

there is also a CNC head listed - Pro Port - davis on Nov 4, 2008, 8:42 AM

I like the new Edelbrock Pro - Port FE Cylinder heads better - Royce on Nov 4, 2008, 8:36 AM

Love the new heads, hate the new intake... - Dave Walters on Nov 4, 2008, 8:55 AM

Terrible Decision - 427Kevin on Nov 4, 2008, 9:39 AM

I dunno guys... - Tommy-T on Nov 4, 2008, 9:58 AM

I agree, im tossing my two edelbrock carbs... would have ordered if - Pippin on Nov 4, 2008, 10:37 AM

Agree - Irv on Nov 4, 2008, 10:38 AM

From Left Field? "Jay got better numbers with the RPM vs the Air Gap." - qikBBstang on Nov 4, 2008, 6:59 PM

now that id consider buying/ n/m - Pippin on Nov 4, 2008, 10:35 PM

The problem with spinning them sideways is... - Dave Walters on Nov 4, 2008, 1:11 PM

Anybody know when it will be available? - Jay Brown on Nov 4, 2008, 12:44 PM

NSS rules specify - Bob Mosher on Nov 4, 2008, 5:57 PM

LOL well you could always try mounting Holley's sideways - qikBBstang on Nov 4, 2008, 6:55 PM

Put on a pair of the.... - KenS on Nov 4, 2008, 7:43 PM

opinion - Tom P on Nov 4, 2008, 8:18 PM

It shouldn't be too hard to get a pair of AFB/AVS carbs to work - Bill Ballinger on Nov 5, 2008, 7:19 AM

reconfiguring holley's to share? - howard on Nov 5, 2008, 2:27 PM

Parts/Vendor Recommendations for New FE Build Appreciated View Thread - Wreckless Warren on Nov 4, 2008, 7:27 AM

I`ve got a NOS ford 390 flexplate in the box,,,,,, - garry on Nov 4, 2008, 9:48 AM

Re: Parts/Vendor Recommendations for New FE Build Appreciated - George Vega on Nov 4, 2008, 1:34 PM

OT - Clint Eastwood's "Gran Torino" features some old fords. View Thread - Chuck Brandt on Nov 4, 2008, 6:24 AM

Clint Eastwood & Old Fords! Cool - Wreckless Warren on Nov 4, 2008, 6:36 AM

It's driveable - Chuck Brandt on Nov 5, 2008, 3:15 AM

M1 - Alan Casida on Nov 4, 2008, 6:37 AM

And............. - Earl on Nov 4, 2008, 5:49 PM

78 & still kickin' ass - Daryl on Nov 4, 2008, 7:13 AM

And He's Still Twice The Man Of These So Call Hero's Of Today - Wreckless Warren on Nov 4, 2008, 7:30 AM

yep. n/m - Pippin on Nov 4, 2008, 10:38 AM

Ford 9' inch question... View Thread - Lance on Nov 4, 2008, 6:23 AM

Yes - Dave Walters on Nov 4, 2008, 7:04 AM

Lots of clues - Hawkrod on Nov 4, 2008, 7:08 AM

Thanks so much ... - Lance on Nov 4, 2008, 12:51 PM

O/T PRI Barbque View Thread - RWJ on Nov 4, 2008, 5:13 AM

I will be at the show again - Barry R on Nov 4, 2008, 5:21 AM

Looking forward to it Wayne. n/m - dedom on Nov 4, 2008, 1:25 PM

Way O/T View Thread - RWJ on Nov 4, 2008, 5:09 AM

Believe it or not.... - Brent on Nov 4, 2008, 5:46 AM

Fake... - Barry Byer on Nov 4, 2008, 9:22 AM

see video - Mike Gray on Nov 4, 2008, 10:34 AM

Not bad, for a fake - Evan Gaffney on Nov 4, 2008, 3:14 PM

Israeli F-15 Recovered From a Spin and Landed With One Wing - Wreckless Warren on Nov 4, 2008, 5:59 PM

68 Torino View Thread - Tbolt on Nov 3, 2008, 11:14 PM

Looks like a nice package, though - Warren 390 on Nov 4, 2008, 5:01 AM

The Y is a 2V car, bet it had a 3 speed in if it was originally a manual - Bill Ballinger on Nov 4, 2008, 6:49 AM

Added in the 80's - Barry R on Nov 4, 2008, 5:20 AM

And Disco Playing On The Radio - Wreckless Warren on Nov 4, 2008, 7:04 AM

Ive seen a gold on gold 68 with cloth, actually gets dirty easy - Pippin on Nov 4, 2008, 9:00 AM

O/T 351w View Thread - John on Nov 3, 2008, 8:39 PM

Yup. Just get the gunky oil off them. - Dave Shoe on Nov 3, 2008, 11:00 PM

Thanks Shoe - John on Nov 4, 2008, 7:43 PM

66 fairlane/FE motor mount brainfart... View Thread - derek on Nov 3, 2008, 8:33 PM

Beware of modern Fairlane/Galaxie mounts. - Dave Shoe on Nov 3, 2008, 11:14 PM

o/t Keeping Chrome View Thread - steve meyer on Nov 3, 2008, 7:43 PM

re: Chrome cleaning - 427Kevin on Nov 3, 2008, 7:51 PM

I use 0000 steel wool to clean ANY rust off of my guns - Cyclone crazy on Nov 3, 2008, 8:31 PM

0000 steel wool works well.... - Dave Walters on Nov 4, 2008, 5:37 AM

factory adjustable rockers/comp282s View Thread - jon on Nov 3, 2008, 7:09 PM

Re: factory adjustable rockers/comp282s - e. philpott on Nov 3, 2008, 7:31 PM

end stands - jon on Nov 3, 2008, 8:04 PM

Re: end stands - 67StangGT on Nov 3, 2008, 10:47 PM

dont forget you subtract -.018 to .024 for lash from that - Pippin on Nov 4, 2008, 9:05 AM

fuel tank pressure View Thread - matt on Nov 3, 2008, 5:06 PM

Re: fuel tank pressure - Alan Casida on Nov 3, 2008, 6:54 PM

Make sure that you in fact have a vented cap & that it is functioning. - Dave Eames on Nov 4, 2008, 9:19 AM

Barry R.-Survival Motorsports in Jan 09 Car Craft View Thread - Clark Coe on Nov 3, 2008, 4:53 PM

Congrats to Barry R also - rcodecj Nick on Nov 3, 2008, 5:18 PM

Could these old boat anchor truck motors be making a comeback........................ - RonW on Nov 3, 2008, 7:40 PM

January!!?...n/m - Dr. Mabuse on Nov 4, 2008, 4:23 AM

Yup! - January Issue of Car Craft....why so early. - Clark Coe on Nov 4, 2008, 6:06 AM

Thanks! - Barry R on Nov 4, 2008, 6:07 AM

Technical Question ?? I am getting ready to drill and tap View Thread - Inthegarge on Nov 3, 2008, 4:19 PM

Instructions from Muscle Parts Supplement No. 1 - Dennis on Nov 3, 2008, 10:54 PM

End of an era in NSS... View Thread - jim carlson on Nov 3, 2008, 2:39 PM

too bad... - Steve Corbin on Nov 3, 2008, 4:25 PM

schedules - Mark Artis on Nov 3, 2008, 7:14 PM

Kim Smith - Mark Artis on Nov 3, 2008, 7:13 PM

Mr. Artis... - Dr. Mabuse on Nov 4, 2008, 4:27 AM

skip m. - Mark Artis on Nov 4, 2008, 5:08 AM

Been years... - BattlestarGalactic on Nov 4, 2008, 7:55 AM

I'm Harboring a Fugitive But It's Taking The Stand View Thread - Wreckless Warren on Nov 3, 2008, 2:12 PM

Looks like the Big Gal is just opening up and saying AHHHH... - Dave Walters on Nov 3, 2008, 4:11 PM

Fugitive's, - Don Ragan on Nov 3, 2008, 4:36 PM

How sweet it is!!! - John on Nov 3, 2008, 6:22 PM

fugitives - Donnie on Nov 3, 2008, 7:27 PM

I can't even talk so have to type, THAT is one - Cyclone crazy on Nov 3, 2008, 8:38 PM

All that and no brass freeze plugs? LOL Send it back. Kidding. - Pippin on Nov 4, 2008, 9:48 AM

1964 Galaxie Disc Brakes View Thread - DEAN FORSTER on Nov 3, 2008, 2:08 PM

scarebird is supposed to be great see ebay link - matt on Nov 3, 2008, 3:02 PM

77 T-iwas a bolt on for my 63 1/2. They are plenty - Inthegarge on Nov 3, 2008, 4:03 PM

77-79 t-bird - fordsel on Nov 3, 2008, 4:55 PM

Just be sure it does not have rear disc brakes - Hawkrod on Nov 3, 2008, 5:21 PM

1964 Galaxie disc brakes - Dean Forster on Nov 3, 2008, 7:29 PM

galaxie discs - john tolliver on Nov 4, 2008, 6:07 AM

I'm happy with - Don Ragan on Nov 3, 2008, 4:39 PM

ot Kip Martin L/SS Mustang View Thread - Gord Bradley on Nov 3, 2008, 2:04 PM

Re: ot Kip Martin L/SS Mustang - Red Le Blanc on Nov 3, 2008, 4:58 PM

Solid Lifter Question View Thread - LanceH on Nov 3, 2008, 2:01 PM

I hate to laugh, but that was funny - Howie on Nov 3, 2008, 4:06 PM

I'm glad I could entertain you. - LanceH on Nov 3, 2008, 5:36 PM

If they are - john vermeersch on Nov 3, 2008, 6:36 PM

they have pushrod oil feed , FE's don't - e. philpott on Nov 3, 2008, 7:30 PM

FEs oil thru the head, not the pushrod - SteveR on Nov 4, 2008, 4:03 AM

Thanks - LanceH on Nov 4, 2008, 11:05 AM

Does anyone have a pic of a '65 Gal dash without the optional padding? View Thread - Bill Ballinger on Nov 3, 2008, 12:05 PM

Here You Go Bill - Wreckless Warren on Nov 3, 2008, 1:54 PM

Thanks. I wish mine was like that - Bill Ballinger on Nov 4, 2008, 4:47 AM

It's been so long since I've driven mine - SteveR on Nov 4, 2008, 4:05 AM

Hey Steve - Wreckless Warren on Nov 4, 2008, 7:02 AM

Yeahhh busy and no more internet at work - SteveR on Nov 5, 2008, 6:05 AM

Oil suppliment View Thread - Joel on Nov 3, 2008, 11:14 AM

comp cams additive - Gene on Nov 3, 2008, 11:41 AM

Las Vegas, baby View Thread - Tom P on Nov 3, 2008, 11:04 AM

<< Prev

11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!