332-428 Ford FE Engine Forum (Page 12 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 22 Visitors 68FBMustang, 21 guests

Not logged in | Login | Create Account

Post Now!

SOHC Rockers will ship Tuesday from T&D View Thread - Keith Craft on Dec 1, 2008, 12:44 AM

Thanks Keith. This is good news. n/m - Dave Shoe on Dec 1, 2008, 6:27 AM

Since you posted it what is the price of a set of rockers - Bill Orrick on Dec 1, 2008, 9:40 AM

Here's a link to the original ad in the classifieds - Jay Brown on Dec 1, 2008, 10:55 AM

Thanks for the update... - Jay Brown on Dec 1, 2008, 10:51 AM

thanks Jay. n/mn/m - Bill Orrick on Dec 1, 2008, 3:37 PM

427 Block info View Thread - Anonymous on Dec 1, 2008, 12:10 AM

Aluminum blocks - Keith Craft on Dec 1, 2008, 12:41 AM

Genesis - Barry R on Dec 1, 2008, 5:33 AM

Blocks - RWJ on Dec 1, 2008, 5:42 AM

How much "after the purchase" machine work is required for SHELBY block - qikBBstang on Dec 1, 2008, 8:46 AM

From what I've seen.. - BattlestarGalactic on Dec 1, 2008, 12:36 PM

After purchase machine work - Jay Brown on Dec 1, 2008, 1:12 PM

Block Machining - Keith Craft on Dec 1, 2008, 11:37 PM

It's ironic that the cost of Half Assed Machine Work is included in Aftermarket Blocks and - qikBBstang on Dec 2, 2008, 8:14 AM

Think about it... - BattlestarGalactic on Dec 2, 2008, 11:33 AM

In defense of Shelby - Joe D. Craine on Dec 2, 2008, 6:06 PM

"lost for 4 months"!!!... - Dr. Mabuse on Dec 3, 2008, 4:20 AM

ot- can I use the elec choke from edelbrock 600 to edel 750? View Thread - derek on Nov 30, 2008, 11:38 PM

yes, they are interchangable N/M - rcodecj Nick on Dec 1, 2008, 5:05 AM

Edsel FE exhaust manifold View Thread - Lucky on Nov 30, 2008, 10:45 PM

Exhaust manifold - FEroadster on Nov 30, 2008, 11:14 PM

58 Edsel Exhaust Manifolds - FERoadster on Dec 1, 2008, 12:06 PM

Manifolds - Lucky on Dec 1, 2008, 10:09 PM

My 58 Edsel Manifolds. - FERoadster on Dec 2, 2008, 7:16 PM

Driver side! - Lucky on Dec 2, 2008, 9:06 PM

Re: Driver side! - Rory McNeil on Dec 2, 2008, 9:53 PM

58 Edsel vs C5 & D2T exhaust manifolds - FERoadster on Dec 4, 2008, 10:21 AM

What carbs to use?? View Thread - Todd on Nov 30, 2008, 10:42 PM

Should be no problem with the ... - DaleP on Nov 30, 2008, 11:28 PM

Here's some pics of the linkage - Todd on Dec 1, 2008, 2:12 AM

Okay, I just set mine up and took pictures... - DaleP on Dec 1, 2008, 12:05 PM

spacer - Tom P on Dec 1, 2008, 6:11 PM

Non FE but Ford anyway. Does anyone have any information View Thread - Ray Hillebrand on Nov 30, 2008, 8:40 PM

Re: Non FE but Ford anyway. Does anyone have any information - Rory McNeil on Nov 30, 2008, 9:12 PM

Can't be a Starsky and Hutch if it is a 1974, they were 1976 only N/M - Hawkrod on Nov 30, 2008, 11:17 PM

middel carburator? View Thread - jack b fuche on Nov 30, 2008, 5:48 PM

Stupid post ignore it - Hawkrod on Nov 30, 2008, 6:29 PM

i have only posted this ? about middel carb once - jack b fuche on Nov 30, 2008, 6:36 PM

DOH! I am an idiot But then some people already knew that - Hawkrod on Nov 30, 2008, 9:24 PM

are you just going to keep posting ??no - jack b fuche on Nov 30, 2008, 6:56 PM

65 - 66 Ford & Merc 352 & 390 3X2 - John P on Nov 30, 2008, 7:09 PM

and the correct middle carb ... - John P on Nov 30, 2008, 7:11 PM

Whats up with this??? - Jody Aberts on Dec 1, 2008, 4:21 AM

Well said Jody - Mark Artis on Dec 1, 2008, 6:22 AM

Does the center carburetor look like the end carbs? - Ray Hillebrand on Nov 30, 2008, 6:59 PM

it looks like end carbs - jack b fuche on Nov 30, 2008, 7:23 PM

carb - Howard on Nov 30, 2008, 7:15 PM

MIDDEL CARB - jack b fuche on Nov 30, 2008, 8:31 PM

ATTEN; HAWK AND A FEW OTHERS - gopher on Nov 30, 2008, 7:56 PM

Re: ATTEN; HAWK AND A FEW OTHERS - Bobby Spears on Nov 30, 2008, 8:14 PM

others - jack b fuche on Nov 30, 2008, 8:38 PM

and a few - jack b fuche on Nov 30, 2008, 8:36 PM

Special Privileges LOL - MeanGene on Dec 1, 2008, 6:44 AM

Sorry Gene it ain't true at all - Hawkrod on Dec 1, 2008, 7:13 AM

R.E. "It ain't all true." It's painfully obvious that HR is a legend in his own mind. - Dave Eames on Dec 1, 2008, 8:26 AM

2nd or 3rd or 4th all that - myrlmorris on Dec 1, 2008, 9:08 AM

Come on guys, you are going to make him feel bad - Bill Ballinger on Dec 1, 2008, 10:38 AM

So much for wishful thinking LOL - MeanGene on Dec 1, 2008, 10:42 AM

Gene, getting picked on was never a problem - Hawkrod on Dec 1, 2008, 11:00 AM

I'm a legend in my own time... - Dr. Mabuse on Dec 1, 2008, 2:13 PM

Do Tell !!! - DaleP on Dec 1, 2008, 10:44 PM

Dave Shoe or any Moderator.......... View Thread - Craig Mitchell on Nov 30, 2008, 4:05 PM

As simple as 1,4,6,8,5,9,7.............................. - Bill on Nov 30, 2008, 4:23 PM

If your friend still has difficulty, have him email me. n/m - Dave Shoe on Nov 30, 2008, 8:41 PM

What's wrong with this picture?? View Thread - Dave Walters on Nov 30, 2008, 2:59 PM

Ummm... - Earl on Nov 30, 2008, 3:02 PM

headers - Gord Bradley on Nov 30, 2008, 3:07 PM

The ignition wires as well as the PVC system - Gary B on Nov 30, 2008, 3:13 PM

Automotive "Falsies" - Rory McNeil on Nov 30, 2008, 3:19 PM

Re: Automotive "Falsies" - Jody Aberts on Nov 30, 2008, 3:21 PM

fe valve covers???? - gopher on Nov 30, 2008, 8:10 PM

Small compensation ... - Beoweolf on Dec 1, 2008, 7:06 AM

They are FE covers - Tom P on Dec 1, 2008, 9:52 AM

Good Eye! N/M - Hawkrod on Dec 1, 2008, 8:29 PM

Mustang & Ford Factory 5 Build - David Bonnell on Nov 30, 2008, 3:18 PM

Bad Plan - Howie on Nov 30, 2008, 3:23 PM

Should have kept the hood shut - Barry R on Nov 30, 2008, 4:00 PM

Like stuffing a sock in pants. You can bet car will have 427 Emblems adorning fenders.n/m - qikBBstang on Nov 30, 2008, 4:18 PM

It very well could.... - Brent on Dec 1, 2008, 5:38 AM

Not to up on the holly dual ... - Mike Gaffney on Nov 30, 2008, 4:55 PM

It could easily be up to those Holleys and they are supposed to be backwards - Hawkrod on Nov 30, 2008, 5:02 PM

Actually there are 460 cu in small blocks - Richard F on Nov 30, 2008, 6:18 PM

471CI possible - Joe D. Craine on Nov 30, 2008, 7:03 PM

Re: What's wrong with this picture?? - Anonymous on Nov 30, 2008, 5:15 PM

427 smallblocks - Tom P on Nov 30, 2008, 5:49 PM

It's not taken in my garage! (edit: Oh I see, sneaky bastards!!) nm - Andy on Nov 30, 2008, 6:10 PM

Re: What's wrong with this picture?? - Don Woodruff on Nov 30, 2008, 7:31 PM

Look close - Tom P on Nov 30, 2008, 9:17 PM

He's right - Barry R on Dec 1, 2008, 5:39 AM

Great catch...... - Bob on Dec 1, 2008, 6:07 AM

Why would you want 2 chokes??? Even if they aren't hooked up, lmao..n/m - dedom on Nov 30, 2008, 8:35 PM

Those FE Cobra valve covers are nothing more than a codpiece.....n/m - Rod C on Dec 1, 2008, 7:24 AM

FE is one of the nicest looking engines - Doug on Dec 1, 2008, 10:23 AM

Re: What's wrong with this picture?? - Anonymous on Dec 1, 2008, 12:16 PM

T- Loader option's View Thread - Howie on Nov 30, 2008, 1:33 PM

good ? - Gord Bradley on Nov 30, 2008, 2:36 PM

s-code - Steve on Nov 30, 2008, 2:59 PM

Re: T- Loader option's - Barry Byer on Nov 30, 2008, 3:10 PM

Re: T- Loader option's - Rory McNeil on Nov 30, 2008, 3:23 PM

top loader - David Bonnell on Nov 30, 2008, 3:23 PM

toploader - john on Dec 1, 2008, 3:09 AM

carter fuel pump rebuild View Thread - Jason Engle on Nov 30, 2008, 11:01 AM

Fits fine - Royce on Dec 1, 2008, 4:36 AM

thanks Royce!! - Jason Engle on Dec 2, 2008, 3:17 AM

found a 69 fairlane cobra with ram air View Thread - rcodecj Nick on Nov 30, 2008, 10:30 AM

My thoughts.. - Jim on Nov 30, 2008, 1:01 PM

some more info - rcodecj Nick on Nov 30, 2008, 1:28 PM

Nick, before you - john vermeersch on Nov 30, 2008, 2:17 PM

AHHH, but john, if yah buy one, you miss the pain and - Cyclone crazy on Nov 30, 2008, 3:59 PM

Are you allowed back into the first two states? J/K N/M - Barry R on Nov 30, 2008, 4:02 PM

HEY Barry, it's only Canada that wont let me in buttt - Cyclone crazy on Nov 30, 2008, 4:11 PM

I've met Chuck and I'm surprised - DaleP on Nov 30, 2008, 8:33 PM

AHHH, but john, if yah buy one, you miss the pain and - Cyclone crazy on Nov 30, 2008, 3:59 PM

Well said, but there's more - rcodecj Nick on Nov 30, 2008, 4:32 PM

Fairlane Cobra is true 60's muscle car AND 69 r-code Mustang is a pony car ???? - qikBBstang on Nov 30, 2008, 4:53 PM

doesn't matter bb - rcodecj Nick on Nov 30, 2008, 5:00 PM

You are right on both fronts... - Tommy-T on Nov 30, 2008, 4:55 PM

Glad someone agrees with the def of musclecar N/M - rcodecj Nick on Nov 30, 2008, 5:01 PM

Same here N/M - Ross on Nov 30, 2008, 7:58 PM

And with the '66 Fairlane they missed the mark on the 390 - Bill Ballinger on Dec 2, 2008, 10:00 AM

muscle car maybe , maybe not - e. philpott on Nov 30, 2008, 9:00 PM

The Insurance Companies that provided the Death Blow to Muscle Cars - qikBBstang on Dec 1, 2008, 4:43 AM

Yeah you ALWAYS have to plan for surprises - like the reason the - qikBBstang on Nov 30, 2008, 4:39 PM

See above post, I added a bit - rcodecj Nick on Nov 30, 2008, 4:52 PM

Ross TKO-600 questions View Thread - Harry H on Nov 30, 2008, 10:29 AM

Re: Ross TKO-600 questions - Ross on Nov 30, 2008, 11:56 AM

will it take a beating? - Harry H on Nov 30, 2008, 12:24 PM

Havent had it on the strip yet - Ross on Nov 30, 2008, 12:51 PM

mushoss here........ - Craig Mitchell on Nov 30, 2008, 2:52 PM

The TKO 666 ... - Mike Gaffney on Nov 30, 2008, 5:19 PM

Thanks Ross............for putting that - Bill on Nov 30, 2008, 3:09 PM

No problem, and as far as the brace, I think its plenty strong - Ross on Nov 30, 2008, 4:10 PM

Thanks......... - Bill on Nov 30, 2008, 4:16 PM

getting easier I think - Harry H on Nov 30, 2008, 5:28 PM

Where are you guys from? - Ross on Nov 30, 2008, 6:23 PM

Long Island - Harry H on Dec 1, 2008, 6:56 AM

Brent is a regular here - Ross on Dec 1, 2008, 1:51 PM

I'm here.... - Brent Lykins on Dec 1, 2008, 3:45 PM

Power capabilities - Woody Owens on Dec 1, 2008, 5:00 AM

Re: Power capabilities - Rory McNeil on Dec 1, 2008, 11:51 PM

BobJohnson View Thread - Bart on Nov 30, 2008, 10:00 AM

I wonder too - Tom P on Nov 30, 2008, 5:55 PM

Pretty unusual name.. should be easy - DaleP on Nov 30, 2008, 6:08 PM

Re: Pretty unusual name.. should be easy - Dan on Dec 1, 2008, 10:35 AM

Eureka...we found him! - Tom P on Dec 1, 2008, 12:46 PM

Barry Rabotnick View Thread - Bob on Nov 30, 2008, 9:43 AM

Need source for the front speaker for my 7 Litre. View Thread - Bob Sprowl on Nov 30, 2008, 9:19 AM

I made up my own ... - Mike Gaffney on Nov 30, 2008, 5:25 PM

They can be reconed, not very expensive - StarlinerRon on Nov 30, 2008, 8:21 PM

Agree- make or buy 2x speaker mount - Dan on Nov 30, 2008, 9:34 PM

P Code 390 - Any forum members in Cleveland, Ohio? View Thread - Bill Howard on Nov 30, 2008, 9:17 AM

Re: P Code 390 - Any forum members in Cleveland, Ohio? - Don Woodruff on Nov 30, 2008, 9:59 AM

Rear quarters and bumper. 330hp is honest - WerbyFord on Nov 30, 2008, 5:25 PM

Check the trunk floor pan. They are notorious for rotting - Ray Hillebrand on Nov 30, 2008, 8:36 PM

I'm an hours south... - BattlestarGalactic on Dec 1, 2008, 5:41 AM

TunnelPort View Thread - RWJ on Nov 30, 2008, 7:15 AM

Maybe... - Bob on Nov 30, 2008, 8:24 AM

That's not just a Turtle by the size its ought to be called a "Tortoise". n/m - qikBBstang on Nov 30, 2008, 9:05 AM

Re: TunnelPort - e. philpott on Nov 30, 2008, 1:41 PM

Low-riser 8V manifold mods View Thread - Paul Frost on Nov 30, 2008, 6:59 AM

I did some tests on a single 4 setup - Jay Brown on Nov 30, 2008, 10:10 AM

Intake Manifolds... 3am ramblings View Thread - Tom P on Nov 30, 2008, 3:04 AM

Here's a shot out into left field...... - Dave Walters on Nov 30, 2008, 6:12 AM

That just moves the... - Aaron J. Benham on Nov 30, 2008, 7:12 AM

Thats true, like I said just a thought... - Dave Walters on Nov 30, 2008, 7:45 AM

As I understand it... - Jay Brown on Nov 30, 2008, 10:12 AM

Another firing order option, 15486372 like the FHs and 351Ws... - hollis franks on Nov 30, 2008, 10:49 AM

Very interesting... - Dave Walters on Nov 30, 2008, 1:53 PM

So you move the problem ... - Bob Sprowl on Nov 30, 2008, 4:18 PM

Chevy 4/7 f.o. swap with special camshaft: - Bob on Dec 1, 2008, 6:19 AM

Great info Bob!! - Dave Walters on Dec 1, 2008, 6:47 AM

Well, Dave...... - Bob on Dec 1, 2008, 9:25 AM

More HP thoughts! - Bob on Dec 1, 2008, 10:18 AM

Re: Well, Dave...... - Dave Walters on Dec 1, 2008, 12:48 PM

The 351W is actually different than the FH, the Y is the same as a flattie - Bill Ballinger on Dec 2, 2008, 10:17 AM

Man-a-Fre's were only made for sbc. - StarlinerRon on Nov 30, 2008, 9:15 PM

61 - Tom P on Nov 30, 2008, 9:19 PM

engine build in progrees - questions - round 4 View Thread - richard on Nov 29, 2008, 11:03 PM

Opinions.... - Jim Whitton on Nov 30, 2008, 4:01 AM

Stuff... - Brent on Nov 30, 2008, 4:57 AM

intake manifold install - Bill on Nov 30, 2008, 8:09 AM

and make sure you have the right bolts - Kyle on Nov 30, 2008, 8:20 AM

Plugs - Darmon on Nov 30, 2008, 5:03 PM

Toploader rebild kit and shifter suggestions View Thread - Doug on Nov 29, 2008, 10:42 PM

Toploader issue - Tom Delaney on Nov 30, 2008, 2:05 AM

toploader - john on Nov 30, 2008, 2:36 AM

Shifter difference: I've broken the handle mounting bolt on the stock shifter going...... - Rod C on Nov 30, 2008, 5:57 AM

that picture - Bob C on Nov 30, 2008, 8:57 AM

1969 in Lincoln Park, Michigan. I was a Downriver Rat trolling on Fort..... - Rod C on Nov 30, 2008, 10:24 AM

I knew it - Bob C on Nov 30, 2008, 1:31 PM

LOL, I've crossed the Mill St bridge a few times to get to Jefferson/Biddle and cruise.... - Rod C on Nov 30, 2008, 4:29 PM

Funny thing - I can remember cars much better than I can remember faces. - Beoweolf on Dec 1, 2008, 7:20 AM

OT..Earl, the going thing.....do you know this car? View Thread - Tbolt on Nov 29, 2008, 8:34 PM

I do not............. - Earl on Nov 30, 2008, 6:55 AM

I'm hooked - First Drag Strip Passes View Thread - Doug Bender on Nov 29, 2008, 7:03 PM

It's a great day when you see the numbers getting lower, except MPH, LOL.....n/m - Rod C on Nov 29, 2008, 7:09 PM

nice - steve meyer on Nov 29, 2008, 7:36 PM

Great news! - Earl on Nov 29, 2008, 8:07 PM

Couldn't happen to a nicer guy... - DaleP on Nov 29, 2008, 8:20 PM

Doug, Congratulations! - WerbyFord on Nov 29, 2008, 8:24 PM

Right on Doug! - ezgoing on Nov 29, 2008, 9:14 PM

great! - Tom P on Nov 30, 2008, 1:52 AM

Trailered - Doug Bender on Nov 30, 2008, 4:37 AM

Congrats Doug!!! - Jody Aberts on Nov 30, 2008, 5:21 AM

No changes - Doug Bender on Nov 30, 2008, 5:49 AM

Great Job Doug!!! - Dave Walters on Nov 30, 2008, 5:53 AM

hey sorry i couldn't make it friday - Kyle on Nov 30, 2008, 8:31 AM

YESSSSSSSSSSSSS, I know the feeling but watch - Cyclone crazy on Nov 30, 2008, 4:07 PM

Way to go, Doug - Larry Renne on Nov 30, 2008, 6:02 PM

Banging gears - mike cannon on Dec 1, 2008, 8:31 AM

performer rpm intake View Thread - Len on Nov 29, 2008, 4:32 PM

Ceramic coat it. - Barry Gaugler on Nov 29, 2008, 4:37 PM

There are supposed to be some sealers .... - Mike Gaffney on Nov 29, 2008, 4:38 PM

Believe me the pressure washer doesn't work. - Barry Gaugler on Nov 29, 2008, 4:51 PM

Simple Green - Don on Nov 29, 2008, 6:30 PM

Ceramic coat it.......... - Craig Mitchell on Nov 29, 2008, 6:33 PM

wow - Len on Nov 29, 2008, 6:39 PM

If you ceramic coat it............ - Craig Mitchell on Nov 29, 2008, 6:57 PM

Cylinder heads also? - Jim L on Nov 29, 2008, 7:48 PM

Heads are aluminum........... - Craig Mitchell on Nov 29, 2008, 8:22 PM

ceramic coat it...color ? - byron w on Nov 29, 2008, 7:30 PM

It is a silver............. - Craig Mitchell on Nov 29, 2008, 7:54 PM

If you want to keep it looking like "new" - DaleP on Nov 29, 2008, 8:16 PM

DupliColor Engine Enamel - Jim Whitton on Nov 30, 2008, 9:17 AM

I do that - Barry R on Nov 30, 2008, 2:11 PM

But it's still paint, so how does it - DaleP on Nov 30, 2008, 6:11 PM

It don't - Barry R on Nov 30, 2008, 6:33 PM

Barrys right ..but - Steve Corbin on Dec 1, 2008, 6:44 AM

I guess you could say Paint will wash with leaking fuel/oil but alum makes a mess - qikBBstang on Dec 2, 2008, 11:12 AM

390 FE high nickel block View Thread - nick on Nov 29, 2008, 4:14 PM

Here we go again. - Barry Gaugler on Nov 29, 2008, 4:35 PM

Yup, Barry is correct, there is no such thing as a high nickel Ford block - Hawkrod on Nov 29, 2008, 4:48 PM

high nichel content blocks - DEAN FORSTER on Nov 29, 2008, 5:58 PM

Re: high nichel content blocks - nick on Nov 29, 2008, 6:03 PM

"when forging the "nodular or "N case" differential"... - Dr. Mabuse on Nov 29, 2008, 6:27 PM

"N" case diff - DEAN FORSTER on Nov 29, 2008, 6:39 PM

some links... - Dr. Mabuse on Nov 29, 2008, 6:47 PM

427 / 428 Blocks are not made of nodular iron - Royce on Nov 30, 2008, 7:06 AM

A few exceptions here Royce. I have personally seen scrap nodular crankshafts...... - Rod C on Nov 30, 2008, 10:35 AM

Not nodular after a remelt?... - Dr. Mabuse on Nov 30, 2008, 12:06 PM

Correct. Nodular doesn't make nodular. - Dave Shoe on Dec 1, 2008, 12:48 PM

Attn Royce: More mis information, guess again ... - Dennis on Nov 30, 2008, 3:17 PM

Dennis, nothing I posted disagrees with what you are saying. - Royce on Nov 30, 2008, 4:58 PM

Better reread your post. - Dennis on Dec 1, 2008, 4:20 AM

So you are saying that there were high nickel 390 blocks used in production? - Royce on Dec 1, 2008, 9:06 AM

Royce, simply reread the posts instead of resorting to diatribe - Dennis on Dec 2, 2008, 12:36 AM

289HiPo cranks were regular production cranks. - Dave Shoe on Dec 1, 2008, 4:36 PM

BUT---Let me tell you about my forged 289 HP crank.... - KenS on Dec 1, 2008, 8:38 PM

Shoe: Not true. Re: 289HiPo cranks were regular production cranks. - Dennis on Dec 2, 2008, 12:13 AM

I got it, take 4 nickels and duck tape. - Pippin on Nov 29, 2008, 7:45 PM

Like I said: Here we go again. - Barry Gaugler on Dec 1, 2008, 3:53 PM

O/T: Tasca invoice to Ford for 2 LWGs. Where to go to have an old copy resurrected?...... View Thread - Rod C on Nov 29, 2008, 3:54 PM

How about a bigger scan? - Royce on Nov 29, 2008, 4:08 PM

The original scan is 36.9MB in Corel Paint Shop Pro XI. I saved it as......... - Rod C on Nov 29, 2008, 6:50 PM

Link to a high-resolution scan. - Dave Shoe on Nov 30, 2008, 11:56 AM

Is Supermotors an open book for anyone to browse through? I thought I was only........ - Rod C on Nov 30, 2008, 12:30 PM

Open book. - Dave Shoe on Nov 30, 2008, 8:32 PM

Rod..... - Glenn on Nov 29, 2008, 4:11 PM

Glenn, it is one of two 'original' copies of the original invoice that Ace may have....... - Rod C on Nov 29, 2008, 6:55 PM

Re: O/T: Tasca invoice to Ford for 2 LWGs. Where to go to have an old copy resurrected?...... - son of RodC on Nov 29, 2008, 5:00 PM

Yeah, that too entered my mind. It's worth a shot to see if our luck holds out.....n/m - Rod C on Nov 29, 2008, 6:57 PM

No big deal - 1960 Town Vic on Nov 29, 2008, 6:41 PM

Thanks for the advice everyone. There is a hand written note that ties it to......... - Rod C on Nov 29, 2008, 7:01 PM

Rod, Yes lots of restoration can be done, but NOT from that scan.. Take it to - Pippin on Nov 29, 2008, 7:49 PM

quick channel separation shows lots of detail... - Pippin on Nov 29, 2008, 8:20 PM

Thanks Pippin, Glenn, and Royce. Having read your responses/e-mail though the words ...... - Rod C on Dec 1, 2008, 8:42 AM

Glad to help Rod..... - Glenn on Dec 1, 2008, 1:09 PM

There are a few ways to do this - StarlinerRon on Nov 29, 2008, 9:55 PM

Thanks Ron, I may play with the Photo Shop using Pippin's suggestions........n/m - Rod C on Dec 2, 2008, 5:35 AM

O/T 460ford.com View Thread - Phil63 on Nov 29, 2008, 2:50 PM

same problem.... - ford429cjlover on Nov 29, 2008, 3:13 PM

Re: same problem.... - Jody Aberts on Nov 29, 2008, 3:38 PM

Goin crazy - Rick on Nov 29, 2008, 8:16 PM

I'm going crazy too, since the same - DaleP on Nov 29, 2008, 10:58 PM

I think it was me - Woody Owens on Nov 30, 2008, 7:31 AM

Anyone have any info on "QualCast" stuff such as lifters ?? View Thread - winr1 on Nov 29, 2008, 2:37 PM

O/T...Whats up with the 460 Forum? View Thread - RJP on Nov 29, 2008, 2:30 PM

Was wondering the same thing.n/m - bbr60 on Nov 29, 2008, 2:33 PM

Please repost this in the classifieds. Thanks n/m - jack b fuche on Nov 29, 2008, 2:43 PM

Why? - RJP on Nov 29, 2008, 5:06 PM

Not yours... - Jay Brown on Nov 29, 2008, 5:37 PM

board is down..... - ford429cjlover on Nov 29, 2008, 3:14 PM

Can I use factory spacer springs with H-S rockers? View Thread - Tim Mc on Nov 29, 2008, 1:03 PM

I think you pretty well have to run solid spacers... - JC DeSaveur on Nov 29, 2008, 1:51 PM

Does anyone sell spacer stock? - Mike Ratterree on Nov 29, 2008, 3:49 PM

What FE intakes am I missing? View Thread - Jay Brown on Nov 29, 2008, 11:34 AM

A lot of Effort - Bart on Nov 29, 2008, 12:01 PM

Sheet metal intake - Jay Brown on Nov 29, 2008, 1:14 PM

Jay, although it expands somewhat.... - Anonymous on Nov 30, 2008, 9:38 AM

Other Intakes to test - FERoadster. on Nov 29, 2008, 12:13 PM

Got the Edelbrock F380... - Jay Brown on Nov 29, 2008, 1:07 PM

Two more... - custom300 on Nov 29, 2008, 12:27 PM

None of the dyno mules have HR or TP heads... - Jay Brown on Nov 29, 2008, 1:08 PM

Re: What FE intakes am I missing? - Dsrtfox on Nov 29, 2008, 12:34 PM

intakes - Tom P on Nov 29, 2008, 12:53 PM

Nope... - Jay Brown on Nov 29, 2008, 1:09 PM

Youreally ought to test one tunnel ram with the Pro-Stock Engineering (PSE) FE base. - Bob Sprowl on Nov 29, 2008, 1:05 PM

Well, I have the Dove tunnel ram... - Jay Brown on Nov 29, 2008, 1:11 PM

I have a Weiand - MeanGene on Nov 29, 2008, 1:33 PM

How bout this guy.... - Joe Burnett on Nov 29, 2008, 1:26 PM

Got that one... - Jay Brown on Nov 29, 2008, 1:38 PM

How did it run? - MeanGene on Nov 29, 2008, 1:49 PM

Test Results - Jay Brown on Nov 29, 2008, 2:03 PM

Is it a low height - MeanGene on Nov 29, 2008, 9:48 PM

Sure thing... - Joe Burnett on Nov 29, 2008, 10:38 PM

Intakes - Ric G. on Nov 29, 2008, 2:01 PM

I tested the C7AE-9425 PI intake - Jay Brown on Nov 29, 2008, 2:04 PM

Jay, have you tested the tunnelports? - garry on Nov 29, 2008, 2:02 PM

Nope - Jay Brown on Nov 29, 2008, 2:05 PM

Best 351-C intake for the PSE base - Jack in Ga on Nov 29, 2008, 2:26 PM

LOL Jack I can't help chuckle your offering up the Cleveland Strip Dominator after saying - qikBBstang on Nov 29, 2008, 2:55 PM

HSD on there pretty often, but UR 19's - kelly on Nov 29, 2008, 5:42 PM

The Strip Dominator is a good manifold... - Tommy-T on Nov 30, 2008, 10:11 AM

Jay when you do the comparisons... - Dave Walters on Nov 29, 2008, 2:30 PM

Yep - Jay Brown on Nov 29, 2008, 2:44 PM

Jay for the book could you also measure down - - WerbyFord on Nov 29, 2008, 5:07 PM

OK - Jay Brown on Nov 29, 2008, 5:51 PM

I'd never heard off this one: Mustang Masters @ Turkey Rod Run had SHELBY labeled - qikBBstang on Nov 29, 2008, 2:39 PM

I've seen a few Shelby and Holman Moody intakes... - Jay Brown on Nov 29, 2008, 2:48 PM

Like a dum-ass I had my camera in my friends Parts Cart and failed to get picture. If it - qikBBstang on Nov 29, 2008, 3:03 PM

BB, the Sidewinder has MR ports not the taller LR ports.......n/m - Rod C on Nov 29, 2008, 3:29 PM

Rod, in RE the Sidewinder.... - KenS on Nov 30, 2008, 10:08 AM

I did not modify the SW I used on my 'C3-J' heads. The extra flange material around the... - Rod C on Nov 30, 2008, 10:40 AM

Weiand Log 8X2 U-Fab - Royce on Nov 29, 2008, 3:00 PM

Thanks Royce... - Jay Brown on Nov 29, 2008, 3:03 PM

Here's a 1958 ad for the Edelbrock 6X2 log manifold - Royce on Nov 29, 2008, 3:51 PM

Edelbrock 6 x 2 manifold - RJP on Nov 29, 2008, 5:15 PM

Royce, I believe.... - KenS on Nov 30, 2008, 10:18 AM

Just goes to prove that "in the old Days" ... Ford "anything" was expensive. - Beoweolf on Dec 1, 2008, 8:04 AM

Reguarding the Venezuelan intake. - Dsrtfox on Nov 29, 2008, 4:04 PM

Thanks I LOL at that - Mario428 on Nov 29, 2008, 4:42 PM

Ouch! - Jay Brown on Nov 29, 2008, 7:40 PM

Dominator intakes - MeanGene on Nov 29, 2008, 4:35 PM

Another manifold although rare. - FERoadster on Nov 29, 2008, 7:43 PM

How about....... - StarlinerRon on Nov 29, 2008, 11:14 PM

Hmmm.... 1963-64 Low Riser 410/427 4V? - Jay Brown on Nov 30, 2008, 8:45 AM

Jay-I have the C3 intake but, no digital camera - StarlinerRon on Nov 30, 2008, 9:31 PM

If you wouldn't mind... - Jay Brown on Dec 1, 2008, 11:08 AM

List of all Offenhauser manifolds - FERoadster on Nov 30, 2008, 12:50 AM

What about Weber intakes? or did I miss earlier post.. - Neville (Australia) on Nov 30, 2008, 4:10 AM

I have the Blue Thunder intake with 4 48 IDA Webers n/m - Jay Brown on Nov 30, 2008, 8:46 AM

you'd have to borrow these I think... - JMO on Nov 30, 2008, 9:36 AM

Good luck is right! - Jay Brown on Nov 30, 2008, 10:17 AM

YIKES!! That top one looks like it.. - DaleP on Nov 30, 2008, 11:42 AM

Looks like a Rat Roaster - MeanGene on Nov 30, 2008, 12:35 PM

actually, this is probably closer to an FE version of a ratroaster... - JMO on Nov 30, 2008, 6:08 PM

Bet they'd adapt to the Weber manifold - MeanGene on Nov 30, 2008, 7:48 PM

FE intakes - Lar on Nov 30, 2008, 1:19 PM

Can you send me a picture? - Jay Brown on Nov 30, 2008, 3:07 PM

intake pictures - lar on Dec 1, 2008, 5:30 PM

Re: What FE intakes am I missing? - Bob Templin on Nov 30, 2008, 7:56 PM

O/T... Reasonable miles between differential drain and refill View Thread - JC DeSaveur on Nov 29, 2008, 9:55 AM

What does Chrysler recommend? - Nathan on Nov 29, 2008, 12:28 PM

I'll have to look into that... - JC DeSaveur on Nov 29, 2008, 1:41 PM

The most importand change is the first one - 1960 Town Vic on Nov 29, 2008, 6:47 PM

O/T: HP Brake Drum Tolerances View Thread - Terry on Nov 29, 2008, 8:57 AM

Re: O/T: HP Brake Drum Tolerances - Bobby Spears on Nov 29, 2008, 9:05 AM

Thanks Bobby - Terry on Nov 29, 2008, 10:40 AM

Re: Thanks Bobby - Bobby Spears on Nov 29, 2008, 1:15 PM

brake shoes - gophergt on Nov 29, 2008, 11:13 AM

Are they power ... - Mike Gaffney on Nov 29, 2008, 11:55 AM

mike - gophergt on Nov 29, 2008, 12:12 PM

NAPA has the 3" Police shoes, bonded or riveted. Here's their page..... - Rod C on Nov 29, 2008, 1:29 PM

Do not believe the link works - bbr60 on Nov 29, 2008, 2:58 PM

It should work now, thanks....n/m - Rod C on Nov 29, 2008, 3:34 PM

Serious Brake Shoes... - Jake R on Nov 29, 2008, 6:52 PM

Give Porterfield a call ... - 68GT500 on Nov 30, 2008, 2:32 AM

Spindle Bolt - Terry on Nov 30, 2008, 7:35 AM

"Brake and Clutch" in Seattle does custom brake & clutch rebuilding and - Dave Eames on Nov 29, 2008, 1:44 PM

Relining - Terry on Nov 30, 2008, 7:39 AM

Specs - Terry on Nov 30, 2008, 7:41 AM

have some made - bud on Dec 1, 2008, 8:30 AM

Linings - Terry on Dec 1, 2008, 12:30 PM

last car on the page. - bud on Dec 2, 2008, 7:03 AM

Hemmings Thunderbolt write-up: View Thread - Bob on Nov 29, 2008, 8:32 AM

Oh man, wait til Dennis sees this.... - Tom P on Nov 29, 2008, 11:13 AM

That's why I..... - Bob on Nov 29, 2008, 12:16 PM

Re: Oh man, wait til Dennis sees this.... - Dennis on Nov 29, 2008, 3:22 PM

I got um! - Jim on Nov 29, 2008, 5:58 PM

Re: I got um! - Dennis on Nov 29, 2008, 6:14 PM

27 ..Really ??? Must have picked up a few.. - DaleP on Nov 30, 2008, 6:14 PM

Re: Hemmings Thunderbolt write-up: - Dsrtfox on Nov 29, 2008, 12:23 PM

Re: Hemmings Thunderbolt write-up: - Dave Walters on Nov 29, 2008, 3:33 PM

Re: Hemmings Thunderbolt write-up: - Jody Aberts on Nov 29, 2008, 3:46 PM

flexplate ? View Thread - rick on Nov 29, 2008, 8:09 AM

Re: flexplate ? - Bobby Spears on Nov 29, 2008, 8:19 AM

thanks.. - rick on Nov 29, 2008, 8:29 AM

New web article on the F-100XL View Thread - Chuck Brandt on Nov 29, 2008, 5:40 AM

Re: New web article on the F-100XL - Jody Aberts on Nov 29, 2008, 6:38 AM

Thanks for the pictures. - Chuck Brandt on Nov 29, 2008, 6:43 AM

Wish my '63 ICB/FE looked that good! n/m KS - KenS on Nov 29, 2008, 7:21 AM

Re: Wish my '63 ICB/FE looked that good! n/m KS - Dsrtfox on Nov 29, 2008, 11:41 AM

Dsrt, you really know how.... - KenS on Nov 30, 2008, 10:34 AM

Thanks Ken - Dsrtfox on Nov 30, 2008, 12:06 PM

My truck is.... - KenS on Nov 30, 2008, 12:50 PM

I have another - earlier - magazine article that seems different? - Beoweolf on Nov 29, 2008, 7:37 AM

magizine artical - jack b fuche on Nov 30, 2008, 9:16 PM

Which one did Mr. Fuche drive?..........n/m - Rod C on Nov 29, 2008, 1:47 PM

which one did mr fuche drive - jack b fuche on Nov 29, 2008, 3:12 PM

It's a shame the current owner doesn't know of your involvement in it's....... - Rod C on Nov 29, 2008, 3:39 PM

horsepower per cubic inch View Thread - myrl morris on Nov 29, 2008, 4:47 AM

DeSoto 1957? 345/345hp - WerbyFord on Nov 29, 2008, 5:48 AM

You need to define the characteristics... (corrected) - Beoweolf on Nov 29, 2008, 6:19 AM

1957 Chevy 283 FI engine was the first... - Dave Walters on Nov 29, 2008, 6:30 AM

Desoto's hemi, not Chevy.......... - Bob on Nov 29, 2008, 7:30 AM

Re: Desoto's hemi, not Chevy.......... - Rory McNeil on Nov 29, 2008, 8:17 AM

1956 it appears, Chrylser 354/355hp - WerbyFord on Nov 29, 2008, 8:20 AM

My 57 was the 270 HP version and - Bobby Spears on Nov 29, 2008, 8:33 AM

Vacaville - MeanGene on Nov 29, 2008, 10:51 AM

I agree that..... - Bob on Nov 29, 2008, 8:41 AM

I think you could order one as - Bobby Spears on Nov 29, 2008, 8:55 AM

57 Ford - Kam on Nov 29, 2008, 9:16 AM

Re: 57 Ford - Don Woodruff on Nov 29, 2008, 11:07 AM

Wally's 56 - Phil63 on Nov 29, 2008, 3:04 PM

F.A.S.T. '56 & '57 @ US131... - Dr. Mabuse on Nov 29, 2008, 6:39 PM

Re: 57 Ford - Bobby Spears on Nov 29, 2008, 1:03 PM

from Hemming Motor news .. the Chrysler Hemi (1956) - Beoweolf on Nov 30, 2008, 7:53 AM

Seem to recall ... - Mike Gaffney on Nov 29, 2008, 11:45 AM

406 came close - Dsrtfox on Nov 29, 2008, 12:05 PM

The "Daytona engine" might be refering to - StarlinerRon on Nov 30, 2008, 12:46 AM

I put together.... - KenS on Nov 30, 2008, 11:01 AM

1hp per cu.in. - Myrl Morris on Nov 30, 2008, 3:47 PM

Sorry, even if you find it, - StarlinerRon on Nov 30, 2008, 9:56 PM

Valley pan was made of flat steel sheet, no - StarlinerRon on Nov 30, 2008, 9:46 PM

Turkey Rod Run View Thread - RWJ on Nov 29, 2008, 4:40 AM

T-Rod ?? Walked up at 7:55AM, bought $15 ticket, walked on in - qikBBstang on Nov 29, 2008, 5:29 AM

T rod run is packed - Jason on Nov 29, 2008, 7:34 AM

Hey Jason, which bushing do you need ?? - winr1 on Nov 29, 2008, 3:07 PM

Just realized the deal I got @ TurkR-R Holman Moody The Legendary Race Team (Hardcover) - qikBBstang on Nov 29, 2008, 7:36 AM

Anyone know what happened to the MEL forum? View Thread - StarlinerRon on Nov 28, 2008, 9:41 PM

I can't read it either, glad it wasn't just me. - WerbyFord on Nov 29, 2008, 5:49 AM

Re: I can't read it either, glad it wasn't just me. - Dsrtfox on Nov 29, 2008, 12:20 PM

Anybody know KULTULZ's e-mail? - StarlinerRon on Nov 29, 2008, 9:58 PM

67 Mustang 9" rearend housing View Thread - Worth, Blaine on Nov 28, 2008, 8:10 PM

'67/'68 Mustang nine inch - Bill on Nov 28, 2008, 9:21 PM

duplicate n/m - Anonymous on Nov 28, 2008, 9:22 PM

Re: 67 Mustang 9" rearend housing - Anonymous on Nov 28, 2008, 9:22 PM

I dont remember the exact numbers - Ross on Nov 29, 2008, 6:36 AM

No, nowhere near the same - Hawkrod on Nov 29, 2008, 7:46 AM

OT/ kinda FE related: styled auto transporters View Thread - Royce Brechler on Nov 28, 2008, 7:47 PM

Sent you a photo of one from SEMA this year.... - Marty Haynes on Nov 28, 2008, 9:58 PM

Re: OT/ kinda FE related: styled auto transporters - Mike on Nov 29, 2008, 6:23 AM

Block cement View Thread - Royce Brechler on Nov 28, 2008, 7:39 PM

Re: Block cement - Rory McNeil on Nov 29, 2008, 8:39 AM

I used the Moroso block fill and then honed - Mario428 on Nov 29, 2008, 10:52 AM

TBird at Infineon View Thread - Bart on Nov 28, 2008, 7:04 PM

Sounds like - MeanGene on Nov 28, 2008, 7:16 PM

Cooks T bird - Rory McNeil on Nov 29, 2008, 8:51 AM

Re: Cooks T bird - MeanGene on Nov 29, 2008, 11:06 AM

Loud FEs - Bart on Nov 29, 2008, 11:57 AM

O/T Does anyone know how to remove........... View Thread - ford-boy on Nov 28, 2008, 5:22 PM

Re: O/T Does anyone know how to remove........... - Ray Hillebrand on Nov 28, 2008, 5:31 PM

You pretty much need to drop the valve body - Hawkrod on Nov 28, 2008, 5:41 PM

cut it off - fordsel on Nov 28, 2008, 6:14 PM

thats what hurst says.... - rick on Nov 28, 2008, 7:26 PM

Shift lever - RWJ on Nov 29, 2008, 4:30 AM

I don't know about rare, but pricey for sure - Hawkrod on Nov 29, 2008, 7:50 AM

arm - fordsel on Nov 29, 2008, 8:48 AM

don't cut or wrench it ! it will brake in trans! - chris on Nov 29, 2008, 9:59 AM

key word is some - fordsel on Nov 29, 2008, 4:06 PM

This is so simple. You can always cut it and then wish you didn't. - Barry Gaugler on Nov 29, 2008, 4:47 PM

O/T Drake Museum/Kraft's Shop View Thread - Bart on Nov 28, 2008, 5:11 PM

You luckey dog! - Richard Dinsen on Nov 28, 2008, 6:12 PM

Shelby American Collection - lewis on Nov 28, 2008, 6:24 PM

Where is the Drake Museum in Nashville, and... - Marty Haynes on Nov 28, 2008, 6:50 PM

My Error/Lane Museum - Bart on Nov 28, 2008, 7:11 PM

Thanks, Bart. That's probably Murfreesboro Pike... - Marty Haynes on Nov 28, 2008, 10:01 PM

More on Museum - Bart on Nov 29, 2008, 11:53 AM

Columbus prices this weekend on fe parts View Thread - Rick Stafford on Nov 28, 2008, 5:11 PM

Well... - BattlestarGalactic on Nov 29, 2008, 3:37 AM

Prices were higher thaan last spring - Royce on Nov 29, 2008, 3:02 PM

Prices vs SOLD/carrying parts. I think the values of Muscle Cars direct the prices of - qikBBstang on Nov 29, 2008, 3:17 PM

Thanks guys for the info, need pricing - Rick on Nov 29, 2008, 4:14 PM

Ebay has changed eveything..... - Jim L on Nov 29, 2008, 8:01 PM

free block - doug on Nov 29, 2008, 5:29 PM

Sales are off in general, not just restoration or FE. - Gary Blair on Dec 1, 2008, 10:38 AM

Here Ya Go Bobby Your 64 In Action View Thread - Dan Bell on Nov 28, 2008, 5:06 PM

Re: Here Ya Go Bobby Your 64 In Action - Bobby Spears on Nov 28, 2008, 5:49 PM

Dan, That has to be the best pic - Earl E on Nov 28, 2008, 8:04 PM

Re: Dan, That has to be the best pic - Bobby Spears on Nov 29, 2008, 8:59 AM

That would be great Bobby - Earl E on Nov 29, 2008, 9:20 AM

A little O/T . Does anybody here know what's up with the 460 forum? View Thread - Posford on Nov 28, 2008, 4:47 PM

Still - you are not the only one getting that message. - Beoweolf on Nov 29, 2008, 7:24 AM

Re: Still - you are not the only one getting that message. - Posford on Nov 29, 2008, 10:05 AM

1967 fairlane Holley carb View Thread - bob on Nov 28, 2008, 4:43 PM

the book says - Bob Hasty on Nov 28, 2008, 6:12 PM

i have one - john on Nov 30, 2008, 1:21 PM

<< Prev

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!