332-428 Ford FE Engine Forum (Page 14 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 22 Visitors 68FBMustang, 21 guests

Not logged in | Login | Create Account

Post Now!

T10 trans for 1962 406 galaxy View Thread - Jeff on Nov 25, 2008, 4:36 PM

63 T-10 trany - Dennis Raymond on Nov 25, 2008, 5:12 PM

more info on 62 406 galaxy trans - jeff on Nov 26, 2008, 12:49 AM

It's hard to tell without the Ford tag. The casting numbers are BW's and can be as....... - Rod C on Nov 26, 2008, 4:38 AM

Rod is right.... - Dave Walters on Nov 26, 2008, 5:52 AM

It is a 62 trans - john vermeersch on Nov 26, 2008, 7:58 AM

what was before 1962? - jeff on Nov 26, 2008, 5:48 PM

BW 4 sp - john vermeersch on Nov 26, 2008, 7:07 PM

my fairlane GT pic in the photo section... View Thread - johannarich. on Nov 25, 2008, 4:07 PM

Old 4 3/8 Stroker Crank View Thread - David Seversike on Nov 25, 2008, 2:44 PM

Scary - Royce on Nov 25, 2008, 8:18 PM

Custom steel billet. - Dave Shoe on Nov 25, 2008, 10:24 PM

I am going to Run It - David Seversike on Nov 26, 2008, 8:16 AM

HTC, HC - Bob on Nov 26, 2008, 8:50 AM

O/T again: Dynamic Compression View Thread - Lucas Massengale on Nov 25, 2008, 1:35 PM

Re: O/T again: Dynamic Compression - Greg on Nov 25, 2008, 1:59 PM

Rod length! - Lucas Massengale on Nov 25, 2008, 2:08 PM

Download his program - Ross on Nov 25, 2008, 2:45 PM

Who's program? - Lucas Massengale on Nov 25, 2008, 8:55 PM

Scroll down on the link you posted - Ross on Nov 26, 2008, 5:59 AM

I am coming up with 10.62 static,and 8.6 DCR at.020 deck - Bill Ballinger on Nov 25, 2008, 2:07 PM

Is there a DCR calculator that you guys are using? - Lucas Massengale on Nov 25, 2008, 2:19 PM

Yes, I use the one that Ross referred to: - Brent on Nov 26, 2008, 3:16 AM

How do I use the advertised duration numbers? - Lucas Massengale on Nov 26, 2008, 7:19 AM

If you use Pat Kelley's software.... - Brent on Nov 26, 2008, 8:04 AM

Ok, got it now. - Lucas Massengale on Nov 26, 2008, 10:51 AM

dcr for mod engine - griffith,chuck on Nov 26, 2008, 12:44 PM

WHEW!!!!! - Lucas Massengale on Nov 26, 2008, 12:57 PM

DCR discussion - Ross on Nov 27, 2008, 8:20 AM

O/T NHSI: Ford has 16 of the safest, Honda only 13! View Thread - Bob on Nov 25, 2008, 12:44 PM

misleading its Ford + Volvo, honda is one their own. not fair comparison. n/m - Pippin on Nov 25, 2008, 10:13 PM

It reflects Ford Motor Company as a whole not Ford Division. Acura is included in........ - Rod C on Nov 26, 2008, 6:31 AM

Hey Pippin, I see your beloved toyoduh finished - StarlinerRon on Nov 27, 2008, 3:55 PM

Please don't exaggerate.... There is always a sharpshooter. - Beoweolf on Nov 26, 2008, 6:51 AM

Gary and Jim, I'm in Washington now View Thread - dedom on Nov 25, 2008, 10:02 AM

Saturday or Sunday works for me, or the following weekend - Gary B on Nov 25, 2008, 10:23 AM

The 29th works for me. - dedom on Nov 25, 2008, 11:38 AM

Friday the 28th - Jim on Nov 25, 2008, 5:24 PM

If the Canadians are permitted.... - Rory McNeil on Nov 26, 2008, 9:28 PM

Lets do it the 29th, late afternoon and evening - Gary B on Nov 27, 2008, 10:13 AM

O/T How does this turbo work?.... View Thread - Larry Hampton on Nov 25, 2008, 9:37 AM

Draw thru... - RJP on Nov 25, 2008, 10:24 AM

That sure looks like it was USED to me.The rusty turbo snail, jerry rigged oil lines, soot - qikBBstang on Nov 25, 2008, 12:15 PM

Used - Falcon67 on Nov 25, 2008, 1:14 PM

No coating in the world will keep cast iron from rusting. - Beoweolf on Nov 26, 2008, 7:08 AM

The picture doesn't show.... - KenS on Nov 25, 2008, 10:32 AM

YIKES!! lol..... - Dave Walters on Nov 25, 2008, 12:20 PM

Re: "Old School" Dave but it's not $4000 either - qikBBstang on Nov 25, 2008, 12:26 PM

LOL...that's true but as you know you get what you pay for - Dave Walters on Nov 25, 2008, 12:27 PM

Building a "Grenade motor" is OK, as long as you know what you got. - Beoweolf on Nov 26, 2008, 7:21 AM

Re grenede motor 30 plus pounds of boost - Joe on Nov 26, 2008, 8:30 PM

? - Jaymz on Nov 25, 2008, 1:19 PM

I know a guy how has one set up for a 302 or 351 or 352, - Pippin on Nov 25, 2008, 10:17 PM

Turbosonic - Randy on Nov 26, 2008, 7:31 AM

If it's not too much - Bob on Nov 26, 2008, 8:54 AM

O/T How expensive is it to change gear ratios in a Dana 60? View Thread - Mike Radke on Nov 25, 2008, 9:23 AM

Should be a few hundred without parts - Timothy on Nov 25, 2008, 10:58 AM

Re: Should be a few hundred without parts - Mike Radke on Nov 25, 2008, 11:21 AM

Re: Should be a few hundred without parts - Mike Patterson on Nov 25, 2008, 3:00 PM

Re: Should be a few hundred without parts - Mike Radke on Nov 25, 2008, 3:19 PM

Housing spreader - MeanGene on Nov 25, 2008, 12:20 PM

C3ae-C heads View Thread - Aaron J. Benham on Nov 25, 2008, 9:20 AM

Re: C3ae-C heads - Ray Hillebrand on Nov 25, 2008, 10:39 AM

in other words - kelly on Nov 25, 2008, 5:05 PM

390, nothing special - Aaron J. Benham on Nov 25, 2008, 6:27 PM

All 390's are Special that why we love them. n/m - Howie on Nov 25, 2008, 6:54 PM

O/T: looking for info on new Ford Fusion. View Thread - cleandan on Nov 25, 2008, 9:00 AM

I know one thing about them.... - Tommy-T on Nov 25, 2008, 9:08 AM

I can't figure out why they didn't convert the Kansas City plant - Bill Ballinger on Nov 25, 2008, 11:27 AM

KC plant - Bill_T on Nov 25, 2008, 11:47 AM

These SUVs are based on the Contour platform so scale - Bill Ballinger on Nov 25, 2008, 11:56 AM

Bill, the Focus I-4 is made at DEP, Dearborn Engine Plant. It ships them across town...... - Rod C on Nov 25, 2008, 7:52 PM

That's cool its a great little engine, alot of heart. It would be ironic - Bill Ballinger on Nov 26, 2008, 9:10 AM

I'll have to ask a friend who works at DEP if they ship the engines a few ........ - Rod C on Nov 26, 2008, 10:31 AM

Fusion 28K - Douglas on Nov 25, 2008, 9:31 AM

Great car, 4 cyl OK - Tim O'Connor on Nov 25, 2008, 9:44 AM

Re: O/T: looking for info on new Ford Fusion. - Rich Ferguson on Nov 25, 2008, 10:00 AM

Re: O/T: looking for info on new Ford Fusion. - Posford on Nov 25, 2008, 10:35 AM

re: Fusion - farnorth on Nov 25, 2008, 11:00 AM

I have a Mercury Fusion... - Scott66gta on Nov 25, 2008, 12:01 PM

Wait for the 2010 - Bill Nuttle on Nov 25, 2008, 6:24 PM

Bobby This Your Old 66 View Thread - Dan Bell on Nov 25, 2008, 7:24 AM

Re: Bobby This Your Old 66 - Bobby Spears on Nov 25, 2008, 9:02 AM

Re: Bobby This Your Old 66 - mike cannon on Nov 25, 2008, 11:18 AM

Regarding the '66 factory Fairlanes , I once heard ... - pmw on Nov 25, 2008, 12:01 PM

Re: Regarding the '66 factory Fairlanes , I once heard ... - Bobby Spears on Nov 25, 2008, 2:48 PM

Just curious ............ - Earl on Nov 25, 2008, 3:30 PM

Re: Just curious ............ - Bobby Spears on Nov 25, 2008, 9:04 PM

Thanks Bob.......... - Earl on Nov 26, 2008, 6:10 AM

bobby ths is your old 66 - bill d "The Pride of S Ga on Nov 25, 2008, 3:57 PM

O/T: Mark Artis. Are you aware of this item on e-bay?...... View Thread - Rod C on Nov 25, 2008, 6:22 AM

Re: O/T: Mark Artis. Are you aware of this item on e-bay?...... - Dan Bell on Nov 25, 2008, 7:25 AM

Photo from a book by Jim Glastonbury - Mark Artis on Nov 25, 2008, 5:52 PM

Thanks.... - Mark Artis on Nov 25, 2008, 5:55 PM

Hey Rod...wanna hear the "Rest of the Story"? - Mark Artis on Nov 26, 2008, 12:54 AM

It looked to me like someone's trying to make a dime off your property. I guess....... - Rod C on Nov 26, 2008, 4:51 AM

O/T can anyone explain Intrusion Attempts, the significance of and how come these jerks View Thread - qikBBstang on Nov 25, 2008, 6:12 AM

Google it, Dude :) - Rich Ferguson on Nov 25, 2008, 7:06 AM

If you think it's a problem - Falcon67 on Nov 25, 2008, 7:49 AM

What would you recommend ... - Mike Gaffney on Nov 25, 2008, 7:56 AM

I use AVG at work... - Brent on Nov 25, 2008, 11:06 AM

The best is an encrypted NAT router and a software firewall - Bill Ballinger on Nov 25, 2008, 11:48 AM

Bill would you please break those directions down so us not-a-clue-Geeks - qikBBstang on Nov 25, 2008, 12:06 PM

I have a Linksys, with the computer wired to it from the network card - Bill Ballinger on Nov 27, 2008, 5:58 AM

I use the free version of Avast... - Rich Ferguson on Nov 25, 2008, 11:52 AM

Sophos / recommend - Falcon67 on Nov 25, 2008, 1:03 PM

Bad advice from Falcon67?... - Dr. Mabuse on Nov 27, 2008, 8:07 AM

They play hide and seek better than the IT Cops, or you can find them. n/m - Pippin on Nov 25, 2008, 10:26 PM

O/T '66 Galaxie suspension View Thread - turq-66 on Nov 24, 2008, 9:33 PM

Raising the Hood - Roberson on Nov 25, 2008, 12:58 AM

some ideas - Jason Engle on Nov 25, 2008, 2:58 AM

Raising Your Galaxie - Wreckless Warren on Nov 25, 2008, 6:26 AM

New springs and .... - Mike Gaffney on Nov 25, 2008, 8:01 AM

A few ideas, or cautions. - cleandan on Nov 25, 2008, 8:34 AM

yep station wagon springs BAD - Jason Engle on Nov 25, 2008, 8:53 AM

Re: yep station wagon springs BAD - Anonymous on Nov 25, 2008, 10:06 AM

Raise? - Tom P on Nov 25, 2008, 10:59 AM

Just use air bags - Anonymous on Nov 25, 2008, 1:35 PM

+1 on rear air-bags... - Dr. Mabuse on Nov 26, 2008, 12:43 PM

Now. I think our kids should have this in their rooms!~ View Thread - Wes Adams Ford428CJ on Nov 24, 2008, 9:19 PM

And Daddy needs this for his desk~ - Wes Adams Ford428CJ on Nov 24, 2008, 9:23 PM

Lamps and such - Frank Bowers on Nov 24, 2008, 10:07 PM

Dirty driving:Thundercars,Indiana View Thread - Anonymous on Nov 24, 2008, 8:22 PM

???? - Jaymz on Nov 24, 2008, 11:26 PM

rednecks on circletrack - Anonymous on Nov 25, 2008, 5:09 AM

It's on HBO,I was genuinely surprised seeing such "red necks" elsewhere in the country - qikBBstang on Nov 25, 2008, 5:50 AM

Wasn't what I thought it was - Lucas Massengale on Nov 25, 2008, 7:54 AM

Why Are You Embarassed Their Just People Coping? - Wreckless Warren on Nov 25, 2008, 7:54 AM

RE: Embarassed ? Nobody here mentioned that word - qikBBstang on Nov 25, 2008, 12:24 PM

Well said - Myrl Morris on Nov 25, 2008, 6:27 PM

Deans (aka Dyno427) Killer Ride!!! WOW must see~ View Thread - Wes Adams Ford428CJ on Nov 24, 2008, 6:35 PM

I'll post more ~ - Wes Adams Ford428CJ on Nov 24, 2008, 6:44 PM

Here are some more pix~ - Wes Adams Ford428CJ on Nov 24, 2008, 7:30 PM

pics - DEAN FORSTER on Nov 24, 2008, 7:53 PM

Very nice Dean!!!..Thanks for posting Wes!!...what has been done to the mill ??..also.. - winr1 on Nov 24, 2008, 8:44 PM

Not a problem Richard~ - Wes Adams Ford428CJ on Nov 24, 2008, 9:10 PM

Great shot of a marine 427 - Tom P on Nov 24, 2008, 11:02 PM

Performer RPM? - Brent on Nov 25, 2008, 3:04 AM

I don't think ... - Mike Gaffney on Nov 25, 2008, 8:12 AM

intake i.d. - DEAN FORSTER on Nov 25, 2008, 8:36 AM

Great car and motor - Myrl Morris on Nov 25, 2008, 3:10 AM

Dist. cap - DEAN FORSTER on Nov 25, 2008, 5:01 AM

Note on those Marine Pentroof Valve Covers....Unique to the Marines I believe - qikBBstang on Nov 25, 2008, 6:55 AM

Pent roof valve covers - DEAN FORSTER on Nov 25, 2008, 7:36 AM

Ford secret stuff Re: one has the p.c.v. grommet and the other has an opening for a twist - qikBBstang on Nov 25, 2008, 10:34 AM

Dist.cap - Myrl Morris on Nov 25, 2008, 6:39 PM

ENGINE MODS - DEAN FORSTER on Nov 25, 2008, 3:04 AM

Re: ENGINE MODS - Russ on Nov 25, 2008, 3:33 AM

Nice job .... - Mike Gaffney on Nov 25, 2008, 8:21 AM

sweet - Anonymous on Nov 25, 2008, 5:10 AM

Nice kit - chrish on Nov 25, 2008, 2:26 PM

Cobra Replica - DEAN FORSTER on Nov 25, 2008, 4:08 PM

Net 54 photo problems??? View Thread - DaleP on Nov 24, 2008, 5:48 PM

Let me try to post a pic... - Steve Leitch on Nov 24, 2008, 5:58 PM

Seems to work...N/M - Steve Leitch on Nov 24, 2008, 5:59 PM

Sure, but do you have any - DaleP on Nov 24, 2008, 6:02 PM

Nah, - Steve Leitch on Nov 24, 2008, 6:03 PM

Ya and I see - Howie on Nov 24, 2008, 6:04 PM

62 cammer - Jim on Nov 24, 2008, 6:19 PM

Me either. - Alan Casida on Nov 24, 2008, 7:14 PM

Re: Net 54 photo problems??? I can't insert either.....n/m - Rod C on Nov 24, 2008, 8:02 PM

No pics for me either - Jay Brown on Nov 24, 2008, 8:14 PM

let's see... - Tom P on Nov 24, 2008, 11:06 PM

Cylinder taper, Experts advice requested.......... View Thread - Craig Mitchell on Nov 24, 2008, 4:38 PM

Cool photo, fancy under the hood! Dont bore it. - WerbyFord on Nov 24, 2008, 4:50 PM

a good operator with a CK10 can straighten them out.... - XR7 on Nov 24, 2008, 5:51 PM

I've honed some... - Steve Leitch on Nov 24, 2008, 6:01 PM

Advice needed....I have to have part of the "pop up" milled off my L2244s to drop the... View Thread - hollis franks on Nov 24, 2008, 2:56 PM

An easy and cheap - Howie on Nov 24, 2008, 5:58 PM

This should work... - Jim on Nov 25, 2008, 4:04 AM

Old fe record holders View Thread - wayne on Nov 24, 2008, 1:07 PM

My 66 Fairlane should be in it. - Bobby Spears on Nov 24, 2008, 2:24 PM

It has.......... - Earl on Nov 24, 2008, 4:43 PM

OT CV transmission View Thread - Andy on Nov 24, 2008, 12:20 PM

Re: OT CV transmission - Rich Ferguson on Nov 24, 2008, 2:02 PM

CVT Trans - Bob J on Nov 24, 2008, 2:16 PM

6 speed slushbox - Tom P on Nov 24, 2008, 2:22 PM

My 03 disel has one - Bobby Spears on Nov 24, 2008, 2:28 PM

Yep, I see them by the truck loads every day. It has less moving parts than the........... - Rod C on Nov 24, 2008, 5:08 PM

The E4OD in 105" wheelbase Bronco left room for a 3' rear driveshaft.n/m - bbr60 on Nov 25, 2008, 7:03 AM

53K miles on 2006 Ford Five Hundred - Clark Coe on Nov 24, 2008, 3:41 PM

Also have 50K+ on one, no troubles - Jim Whitton on Nov 24, 2008, 5:25 PM

freestyle - Steve Corbin on Nov 25, 2008, 1:27 PM

High Riser Price help View Thread - Howard on Nov 24, 2008, 11:16 AM

I sold my C4AE-D five years ago - Bobby Spears on Nov 24, 2008, 2:31 PM

How about........... - Blair Patrick on Nov 24, 2008, 10:05 PM

cam conversion View Thread - Anonymous on Nov 24, 2008, 11:02 AM

at least get end stands - Kyle on Nov 24, 2008, 12:06 PM

any - Anonymous on Nov 24, 2008, 1:06 PM

You would need to upgrade your valvetrain + to run that cam 674 lift and 262 @.050 durat - Scott on Nov 24, 2008, 8:50 PM

Gear Vendors Toploader Install? View Thread - GTSCODE on Nov 24, 2008, 10:47 AM

Have one on a customer car here now - Barry R on Nov 24, 2008, 10:51 AM

Call Gear vendors - John on Nov 24, 2008, 1:22 PM

any updates on PRW .Aluminum Rocker Arms ? View Thread - Hugo on Nov 24, 2008, 9:55 AM

I can get them - Barry R on Nov 24, 2008, 10:32 AM

I am - Don K. on Nov 24, 2008, 1:45 PM

bought a set - Scott on Nov 27, 2008, 4:55 AM

O/T: Mileage Calculations View Thread - Terry on Nov 24, 2008, 9:13 AM

with 3.00 i would say 15-16 mpg - David Ventura on Nov 24, 2008, 9:22 AM

Gear ratio calculators - Bob on Nov 24, 2008, 9:39 AM

3.00 Rear - Terry on Nov 24, 2008, 10:10 AM

several yrs ago I rebuilt my 63-427,,,,,,, - garry on Nov 24, 2008, 9:34 AM

Re: O/T: Mileage Calculations - Leo Allen on Nov 24, 2008, 9:38 AM

Not necessarily - Barry Byer on Nov 24, 2008, 9:55 AM

Engine - Terry on Nov 24, 2008, 10:14 AM

depends - Tom P on Nov 24, 2008, 11:00 AM

When gas hit $3.00 I added an MPG option to the Gonk - WerbyFord on Nov 24, 2008, 11:09 AM

Figures - Terry on Nov 24, 2008, 12:56 PM

Ok I found it. 14.19mpg, 3.70 gear, 14.31mpg, 3.00 gear - WerbyFord on Nov 24, 2008, 4:45 PM

Alterations - Terry on Nov 25, 2008, 6:07 AM

Do you have a wide ratio or close ratio toploader - qikBBstang on Nov 24, 2008, 1:44 PM

Re: Do you have a wide ratio or close ratio toploader - Terry on Nov 25, 2008, 5:55 AM

With respect to cams, always wanted to know how the effect of load to rpm effects mileage - qikBBstang on Nov 24, 2008, 1:52 PM

I would think a mill would be most efficient at peak torque... - winr1 on Nov 24, 2008, 3:52 PM

my thoughts - Tom P on Nov 24, 2008, 4:56 PM

Mostly true at full throttle. Is the 15mpg highway? - WerbyFord on Nov 24, 2008, 4:56 PM

I drive mostly around town, the truck when it was bone stock got around 15 mpg also.... - winr1 on Nov 24, 2008, 5:30 PM

The best fuel mileage....... - Bob on Nov 24, 2008, 6:23 PM

Drove my then new '64 Custom 'R'.... - KenS on Nov 24, 2008, 8:42 PM

MPG at 100mph, nice data! - WerbyFord on Nov 25, 2008, 3:19 AM

Ponder this. The negative side of an Otto-cycle engine is that it pulls vacuum - qikBBstang on Nov 25, 2008, 6:31 AM

High speed mileage - Tom P on Nov 25, 2008, 11:19 AM

My Mustang in 2004 - Ross on Nov 25, 2008, 7:54 PM

427 SOHC in Wikipedia: View Thread - Bob on Nov 24, 2008, 9:02 AM

Was the GAA a hemi?... - Dr. Mabuse on Nov 24, 2008, 2:47 PM

Pent roof chamber - RJP on Nov 24, 2008, 4:39 PM

...pentroof is just another version of hemi. - JMO on Nov 24, 2008, 4:50 PM

Hemis - Tom P on Nov 24, 2008, 4:58 PM

you mean like these... - JMO on Nov 24, 2008, 7:50 PM

Side Center oiler View Thread - John on Nov 24, 2008, 7:38 AM

It's definitely not "somewhat unusual" - Hawkrod on Nov 24, 2008, 7:59 AM

FE oiling system improvements View Thread - John on Nov 24, 2008, 7:33 AM

...one you missed - Jason on Nov 24, 2008, 8:13 AM

More on.... - Bob on Nov 24, 2008, 8:43 AM

oil mods - Gene on Nov 24, 2008, 2:29 PM

There are only two things you really need to do - Jay Brown on Nov 24, 2008, 3:48 PM

My .02...and worth every penny - RJP on Nov 24, 2008, 5:02 PM

Many Thanks - John on Nov 24, 2008, 11:32 PM

O/T - Computer/F.I. hesitation or bog on a 94 351W View Thread - Pete S. on Nov 24, 2008, 3:55 AM

You may need to have it tested using the smoke leak detector. If you have..... - Rod C on Nov 24, 2008, 4:04 AM

i want to say vacuum leak - Kyle on Nov 24, 2008, 5:34 AM

TPS............ - Earl on Nov 24, 2008, 5:41 AM

I agree with Earl ... - Mike Gaffney on Nov 24, 2008, 5:55 AM

Re: O/T - Computer/F.I. hesitation or bog on a 94 351W - Ray H..... on Nov 24, 2008, 8:28 AM

I thought TPS, too - Pete S. on Nov 24, 2008, 8:55 AM

Use a voltmeter to tune the TPS - Bill Ballinger on Nov 24, 2008, 9:07 AM

Re: Use a voltmeter to tune the TPS - Ray Hillebrand on Nov 24, 2008, 12:50 PM

Very good advice - Bill Ballinger on Nov 24, 2008, 2:53 PM

O/T - Computer/F.I. hesitation or bog on a 94 351W - potter on Nov 24, 2008, 2:11 PM

TPS - Coogs on Nov 24, 2008, 2:55 PM

Don't forget about the MAF sensor - Bobby Spears on Nov 24, 2008, 2:53 PM

You ain't kidd'n about the MAF sensor! - Tommy-T on Nov 25, 2008, 9:06 AM

I thought the trucks were all speed density? They would be MAP - Bill Ballinger on Nov 25, 2008, 12:07 PM

Re: O/T - Computer/F.I. hesitation or bog on a 94 351W - Rich Ferguson on Nov 24, 2008, 2:56 PM

Bog - Joe D. Craine on Nov 24, 2008, 8:01 PM

EGR - Al on Nov 25, 2008, 10:00 AM

What's a safe DCR to aim for.. View Thread - Todd on Nov 24, 2008, 3:47 AM

On iron heads.... - Brent on Nov 24, 2008, 4:56 AM

I wouldn't go any higher than 8:1 - Jay Brown on Nov 24, 2008, 1:02 PM

Smog tubes (???) on my intake necessary? View Thread - Kim on Nov 23, 2008, 9:32 PM

Re: Smog tubes (???) on my intake necessary? - Greg on Nov 23, 2008, 9:38 PM

Never mind - Wes Adams Ford428CJ on Nov 23, 2008, 9:39 PM

the hose you have running to the other side - Tom J. on Nov 23, 2008, 10:34 PM

Thanks for the picture. (n/m) - Kim on Nov 24, 2008, 7:55 AM

IMO, that piece was put there so current owners doing a numbers restoration will sell..... - Rod C on Nov 24, 2008, 5:01 AM

the answer is no - Kerry on Nov 24, 2008, 5:53 AM

Thanks for the offer to take this junk off my hands, Kerry! - Kim on Nov 24, 2008, 7:56 AM

Smog tubes on intake - Mike Senar on Nov 24, 2008, 9:52 AM

You are close but not quite correct - Hawkrod on Nov 24, 2008, 10:11 AM

I'm close but not quite correct - Mike Senar on Nov 24, 2008, 1:02 PM

My favorite Drag Strip View Thread - Wes Adams Ford428CJ on Nov 23, 2008, 9:17 PM

Norwalk, Ohio - DragBoss on Nov 24, 2008, 5:24 PM

MAN! Kids these days will do anything!!!!~ View Thread - Wes Adams Ford428CJ on Nov 23, 2008, 9:06 PM

Darwin Award Wannabe's - Kerry Johnson on Nov 23, 2008, 9:14 PM

Was that Iraq? - Josh on Nov 23, 2008, 9:17 PM

dude no way that is real... - robert on Nov 23, 2008, 10:17 PM

Oh yes it is.... - Tom P on Nov 23, 2008, 11:44 PM

These are people......... - Earl on Nov 24, 2008, 6:18 AM

Oh, please... - Beoweolf on Nov 24, 2008, 7:06 AM

How old are they? - Earl on Nov 24, 2008, 5:20 PM

tom wait a minute..... - robert on Nov 24, 2008, 9:49 PM

No potholes?? - Dan W on Nov 24, 2008, 5:09 AM

run over by own car=wonder at what point the Bozo figured maybe this wasn't to bright n/m - qikBBstang on Nov 24, 2008, 7:41 AM

Let's go surfin' now, everybodys learnin' how...n/m - Dr. Mabuse on Nov 24, 2008, 1:09 PM

Re: MAN! Kids these days will do anything!!!!~ - turq-66 on Nov 24, 2008, 9:39 PM

This proves its real - qikBBstang on Nov 25, 2008, 8:08 AM

ANYONE LIVE IN LAS VEGAS? View Thread - Larry on Nov 23, 2008, 8:12 PM

I'm about 11Hrs away ~ - Wes Adams Ford428CJ on Nov 23, 2008, 8:17 PM

Las Vegas - Kerry Johnson on Nov 23, 2008, 9:12 PM

I am here - Tom in Vegas on Nov 23, 2008, 10:24 PM

Reno area - Tom C on Nov 24, 2008, 7:00 AM

I pulled some heads View Thread - Lowell on Nov 23, 2008, 6:35 PM

older block, n/m - Bob Hasty on Nov 23, 2008, 6:37 PM

Block marking locations changed after 1964. - Dave Shoe on Nov 23, 2008, 6:50 PM

pulled some heads - jack b fuche on Nov 23, 2008, 9:00 PM

Beware, PayPal phishing View Thread - 1960 Town Vic on Nov 23, 2008, 6:20 PM

Here is something that will help and its free!!!!~ - Wes Adams Ford428CJ on Nov 23, 2008, 8:22 PM

Are these heads actually what the seller claims? View Thread - Bob on Nov 23, 2008, 6:05 PM

pretty spare pics - Bob Hasty on Nov 23, 2008, 6:39 PM

Re: Are these heads actually what the seller claims? - RiverRacer on Nov 23, 2008, 6:53 PM

Re: Are these heads actually what the seller claims? - Rory McNeil on Nov 23, 2008, 7:12 PM

Give him a call... - Mike Burch on Nov 23, 2008, 7:26 PM

I'm thinking - Tom P on Nov 23, 2008, 7:30 PM

Re: Are these heads actually what the seller claims? - Barry Byer on Nov 23, 2008, 7:37 PM

hmmmmmmmmmmmmmmm - Stephen & Horace Johnson on Nov 24, 2008, 5:33 AM

Re: hmmmmmmmmmmmmmmm - Rory McNeil on Nov 24, 2008, 6:20 AM

His other auctions have more pics and head casting #s n/m - qikBBstang on Nov 24, 2008, 10:13 AM

Re: hmmmmmmmmmmmmmmm - RiverRacer on Nov 24, 2008, 10:27 AM

Exact numbers.......................... - Blair Patrick on Nov 24, 2008, 10:02 PM

Re: Exact numbers.......................... - RiverRacer on Nov 24, 2008, 10:57 PM

broken stud removal View Thread - Tom V on Nov 23, 2008, 5:46 PM

I have one like this - Tom J. on Nov 23, 2008, 6:00 PM

If you can heat it with a torch, touch some candle wax to it, it'll wick the wax into... - Larry Hampton on Nov 23, 2008, 6:48 PM

I just removed one... - Jim on Nov 24, 2008, 4:21 AM

Stud removal - Graeme on Nov 24, 2008, 2:56 PM

Rear Main Seal? View Thread - Tom V on Nov 23, 2008, 5:42 PM

They sell a dye you can put in your oil that helps to - Inthegarge on Nov 23, 2008, 6:07 PM

I've changed the seal in the car - 1960 Town Vic on Nov 23, 2008, 6:26 PM

Check to make sure it's not ... - Mike Gaffney on Nov 23, 2008, 8:08 PM

B9AF-121 Distributor? View Thread - Kim on Nov 23, 2008, 5:10 PM

Kim, do you have - Earl E on Nov 23, 2008, 5:30 PM

This actually came installed in a fresh 428 I bought. - Kim on Nov 23, 2008, 5:35 PM

Need more #'s...B9AF = 1959...n/m - Dr. Mabuse on Nov 24, 2008, 4:28 AM

Back in action.......YEEEHAAA View Thread - Wes Adams Ford428CJ on Nov 23, 2008, 3:52 PM

Welcome back online! - Ryan on Nov 23, 2008, 4:38 PM

Thanks Ryan!~ - Wes Adams Ford428CJ on Nov 23, 2008, 8:16 PM

Back in action !! - DEAN FORSTER on Nov 23, 2008, 7:24 PM

I didn't get the Pix Dean~ - Wes Adams Ford428CJ on Nov 23, 2008, 8:13 PM

E-MAIL OF PICS - DEAN FORSTER on Nov 24, 2008, 2:29 AM

So, how long have you been away?, ....LOL....J/K....n/m. - Rod C on Nov 24, 2008, 4:53 AM

Out of commission since Aug 15th........ - Wes Adams Ford428CJ on Nov 24, 2008, 5:04 PM

Info on repop clutch parts for BB fairlane View Thread - Rick Stafford on Nov 23, 2008, 12:34 PM

This eBay seller repops the engine bracket ... - Bob on Nov 23, 2008, 6:22 PM

That is Perogies on the eBay auction - Doug Bender on Nov 24, 2008, 4:05 AM

OT..Anyone have a 351w 69 Torino? View Thread - Tbolt on Nov 23, 2008, 12:22 PM

FE water pump ? View Thread - Royce Brechler on Nov 23, 2008, 11:36 AM

361 or 391? - BattlestarGalactic on Nov 23, 2008, 1:11 PM

What you have is a cammer water pump,,,,, - g on Nov 23, 2008, 1:50 PM

yah look like cammer - chris on Nov 23, 2008, 2:07 PM

my cammer water pump C5AE-8505-C CHC-C - Bill Orrick on Nov 23, 2008, 3:25 PM

Water pump - RWJ on Nov 23, 2008, 5:24 PM

Royce! Buddy! - Jay Brown on Nov 23, 2008, 5:44 PM

Even a blind squirrel sometimes finds an acorn - Royce Brechler on Nov 23, 2008, 10:25 PM

indexing bellhousing View Thread - jon on Nov 23, 2008, 11:26 AM

Well... - BattlestarGalactic on Nov 23, 2008, 1:11 PM

These are easier to use - RobbMc on Nov 23, 2008, 1:20 PM

thanks - jon on Nov 23, 2008, 1:36 PM

Rob, question about dowels......... - Craig Mitchell on Nov 23, 2008, 2:40 PM

Answers - RobbMc on Nov 23, 2008, 2:54 PM

Awesome Video View Thread - Chris Whitney on Nov 23, 2008, 10:25 AM

I recognize that! - Tom P on Nov 23, 2008, 11:15 AM

Vegas - Chris Whitney on Nov 23, 2008, 11:16 AM

Nice Fairlane wagon in that video! - Jay Brown on Nov 23, 2008, 11:35 AM

Nice video - Rory McNeil on Nov 23, 2008, 12:03 PM

Video?? - Chris Whitney on Nov 23, 2008, 4:51 PM

video - Tom P on Nov 23, 2008, 7:32 PM

I bet Tom & Rory have been here~ - Wes Adams Ford428CJ on Nov 23, 2008, 9:03 PM

Re: I bet Tom & Rory have been here~ - Rory McNeil on Nov 23, 2008, 10:55 PM

I am in it - Tom P on Nov 24, 2008, 10:47 AM

How about Free for me Tom? LOL~ - Wes Adams Ford428CJ on Nov 24, 2008, 4:59 PM

I bet that was a bummer~ - Wes Adams Ford428CJ on Nov 24, 2008, 5:03 PM

Wow - Ken 67 Wagon on Nov 24, 2008, 4:39 AM

"The Year of the Cammer" Bill Coon / Heads & Intakes View Thread - Anonymous on Nov 23, 2008, 9:38 AM

a few corrections - paul munro on Nov 23, 2008, 12:28 PM

Thanks for the update. - Dave Shoe on Nov 23, 2008, 2:14 PM

Associated Munro Cammer photos. - Dave Shoe on Nov 23, 2008, 6:47 PM

head weights - paul munro on Nov 23, 2008, 8:13 PM

Cammer heads - Keith Craft on Nov 23, 2008, 11:08 PM

O/T-09' F-150 View Thread - Mark Pruitt on Nov 23, 2008, 5:16 AM

Mark, with more info I can check on my Ford Plan site what the pricing may be. Post..... - Rod C on Nov 23, 2008, 5:24 AM

well, it's a long list LOL... - Mark Pruitt on Nov 23, 2008, 6:21 AM

Mark, what's your zip code? It's needed for regional incentives..... - Rod C on Nov 23, 2008, 9:30 AM

Rod,houston is 77077 and seattle is 98177 - Mark Pruitt on Nov 24, 2008, 3:33 AM

Well I 'built' a loaded Lariat using your options and I 'stickered' 3k higher. I...... - Rod C on Nov 24, 2008, 5:09 AM

Thanks Rod... - Mark Pruitt on Nov 24, 2008, 4:45 PM

Good idea to sit tight.....n/m - Rod C on Nov 24, 2008, 5:36 PM

Buy now - C5HM on Nov 23, 2008, 6:48 AM

I agree the 5.5' box looks ridiculous... - Mark Pruitt on Nov 23, 2008, 7:01 AM

It seems insane to me - 1960 Town Vic on Nov 23, 2008, 6:55 AM

well to each his own... - Mark Pruitt on Nov 23, 2008, 7:02 AM

Re: well to each his own... - Anonymous on Nov 23, 2008, 7:56 AM

Looney Tunes and Fords Truck Designers - qikBBstang on Nov 23, 2008, 8:16 AM

i agree - fordsel on Nov 23, 2008, 10:05 AM

The C300 and the 325xi - 1960 Town Vic on Nov 23, 2008, 9:39 AM

Problem solved - Jim on Nov 23, 2008, 8:05 AM

Combination roll bar / ladder rack? - Ross on Nov 23, 2008, 8:55 AM

I've been wondering the same thing. - Zilla_58 on Nov 23, 2008, 8:58 AM

Interesting responses - 1960 Town Vic on Nov 23, 2008, 9:45 AM

I don't think welfare helps anyone - Gary B on Nov 23, 2008, 12:00 PM

It helps many - 1960 Town Vic on Nov 23, 2008, 6:08 PM

The Big 3 CEO performance before Congress - bbr60 on Nov 24, 2008, 11:50 AM

Big 3 CEOs saw the Bankers use the drive-thru window. At least they went inside........ - Rod C on Nov 24, 2008, 5:39 PM

LOL Aint that the truth though! N/M - Ross on Nov 25, 2008, 5:28 AM

Don't wait to long. - fecarman on Nov 23, 2008, 10:07 AM

Just a few days ago.............................. - RonW on Nov 23, 2008, 10:27 AM

<< Prev

4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!