332-428 Ford FE Engine Forum (Page 6 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 21 Visitors 68FBMustang, 20 guests

Not logged in | Login | Create Account

Post Now!

OT...... Removal of siezed drain plug from block..... View Thread - Craig Mitchell on Dec 15, 2008, 6:05 PM

Get it glowing - 1960 Town Vic on Dec 15, 2008, 6:11 PM

Bingo - Ross on Dec 15, 2008, 6:26 PM

Is the block assembled or bare? Is it in a car or on a stand? You'll....... - Rod C on Dec 15, 2008, 6:18 PM

Block is bare sitting on floor.......nm - Craig Mitchell on Dec 15, 2008, 6:22 PM

Do you have an air hammer? - Les on Dec 15, 2008, 7:00 PM

. . . and use plenty of penetrant like PB Blaster. - Les on Dec 15, 2008, 7:06 PM

Don't get the block glowing - Tim O\'Connor on Dec 15, 2008, 7:10 PM

heat the plug - fordsel on Dec 16, 2008, 2:57 PM

Craig............................. - RonW on Dec 15, 2008, 7:17 PM

I had 6 17 year old muffler clamps deeply pitted, they usually break off, I sprayed.... - winr1 on Dec 15, 2008, 7:26 PM

Learned a long time ago - MeanGene on Dec 15, 2008, 8:04 PM

I've not tried it yet but the super markets now sell dry ice - qikBBstang on Dec 16, 2008, 7:10 AM

Re: OT...... Removal of siezed drain plug from block..... - Mike on Dec 16, 2008, 7:49 AM

Re: OT...... Removal of siezed drain plug from block..... - Rory McNeil on Dec 16, 2008, 9:59 AM

I am with you on that. If the block is bare knock out the core plugs - Bill Ballinger on Dec 16, 2008, 12:37 PM

ROFLMAO...............Bill your "envionmentally friendly" approach was priceless n/m - qikBBstang on Dec 16, 2008, 2:05 PM

Thanks for the responses...........Espicialy Bills - Craig Mitchell on Dec 16, 2008, 7:21 PM

Mustang Restoration Manual - OT View Thread - Ian on Dec 15, 2008, 5:40 PM

Re: Mustang Restoration Manual - OT - r on Dec 15, 2008, 8:36 PM

Well not all of it - Ian on Dec 16, 2008, 12:48 AM

I presume you have a genuine Ford Shop Manual? They are a tremendous help - qikBBstang on Dec 16, 2008, 7:46 AM

Manuals - Falcon67 on Dec 16, 2008, 9:02 AM

The Auto-Parts-Store Manuals are worse then worthless - qikBBstang on Dec 16, 2008, 2:08 PM

Ever here of this guy? View Thread - Kevin on Dec 15, 2008, 5:35 PM

was his first name - Tom J. on Dec 15, 2008, 5:46 PM

Re: was his first name - Kevin on Dec 15, 2008, 5:51 PM

kevin - Gord Bradley on Dec 15, 2008, 6:44 PM

Re: kevin - sixty3 on Dec 16, 2008, 3:03 PM

Kevinhighriser, as I remember............................. - RonW on Dec 15, 2008, 7:25 PM

Re: Kevinhighriser, as I remember............................. - sixty3 on Dec 16, 2008, 3:02 PM

Same guy................. - RonW on Dec 16, 2008, 6:42 PM

same guy - Anonymous on Dec 17, 2008, 5:08 PM

Hey sixty3...Tell Kevin I have a router I will give him if he still needs one... - winr1 on Dec 16, 2008, 9:34 PM

router - Anonymous on Dec 17, 2008, 5:13 PM

I seem to recall he had a lot of theory about head flow - Gary B on Dec 16, 2008, 5:18 PM

Strange, but here is an old post.......................... - RonW on Dec 16, 2008, 8:58 PM

one of the best things about this forum - kelly on Dec 17, 2008, 5:38 AM

HIGH-RISER - Anonymous on Dec 17, 2008, 5:04 PM

L2303 Point Of Origin? View Thread - FElony on Dec 15, 2008, 5:19 PM

Hey FELony, some info and pics below on the cast pistons... - winr1 on Dec 15, 2008, 6:46 PM

Hard to Tell - FElony on Dec 15, 2008, 7:06 PM

Cool pic - Barry R on Dec 15, 2008, 7:41 PM

What was the old price? - FElony on Dec 15, 2008, 9:15 PM

I bought the .030 over 395P's with Speed Pro moly rings for $85.00 shipped, the .... - winr1 on Dec 15, 2008, 11:08 PM

Re: I bought the .030 over 395P's with Speed Pro moly rings for $85.00 shipped, the .... - FElony on Dec 16, 2008, 10:02 AM

I will ask my Brother where he bough the Indian pistons, also... - winr1 on Dec 16, 2008, 10:20 PM

Specs - FElony on Dec 17, 2008, 9:26 AM

I would not use those india pistons... and at a 20g penalty too - Pippin on Dec 16, 2008, 10:08 AM

Autolite fuel inlet fitting? View Thread - John on Dec 15, 2008, 4:55 PM

Classifieds - Kerry Johnson on Dec 15, 2008, 5:24 PM

easy... - Richard Dinsen on Dec 15, 2008, 6:52 PM

Thanks Galaxieman! - John on Dec 16, 2008, 3:30 AM

OT Advanced Auto RANT!! View Thread - John Ferguson on Dec 15, 2008, 1:31 PM

They never like it when you have part numbers... - Josh on Dec 15, 2008, 1:51 PM

Re: OT Advanced Auto RANT!! - Jeff Colvert on Dec 15, 2008, 1:54 PM

Re: OT Advanced Auto RANT!! - Anonymous on Dec 15, 2008, 2:00 PM

Re: OT Advanced Auto RANT!! - Anonymous on Dec 15, 2008, 2:13 PM

Write a letter to local, state and regional rep's detailing the fine customer - Dave Eames on Dec 15, 2008, 2:31 PM

i guess i'm the exception..... - johannarich. on Dec 15, 2008, 3:19 PM

2 words - Bob Hasty on Dec 15, 2008, 3:25 PM

When I was a counterman I loved it when someone had a part number...... - Mike U on Dec 16, 2008, 12:24 PM

Sorry but Ive been there - Faron Rhoads on Dec 15, 2008, 3:36 PM

That's what I thought... - Josh on Dec 15, 2008, 4:59 PM

Re: OT Advanced Auto RANT!! - Wreckless Warren on Dec 15, 2008, 4:01 PM

ATTENTION WARREN STOP!!!!!! - gopher on Dec 15, 2008, 6:39 PM

Good Tip! Thanks Gopher - Wreckless Warren on Dec 15, 2008, 7:27 PM

Parts store??? - John on Dec 15, 2008, 4:35 PM

I�m not defending them because I�ve been treated like crap myself BUT..... - Timmy390 on Dec 15, 2008, 4:58 PM

I would go up the ladder - Richard F on Dec 15, 2008, 5:42 PM

It is insane to go to a parts store without a part number - 1960 Town Vic on Dec 15, 2008, 6:08 PM

Just for fun.... - LanceH on Dec 15, 2008, 7:02 PM

I feel your pain, but what do you expect from the big parts chains that only pay minimum.. - D hearne on Dec 15, 2008, 7:14 PM

With all due respect to workin' stiffs; if you pay peanuts you get monkeys! However, - Dave Eames on Dec 15, 2008, 7:42 PM

Re: OT Advanced Auto RANT!! - Ray Hillebrand on Dec 15, 2008, 7:41 PM

Big parts store - MeanGene on Dec 15, 2008, 8:30 PM

Re: OT Advanced Auto RANT!! - r on Dec 15, 2008, 8:34 PM

Had a good one a few months ago ..... - Randy on Dec 15, 2008, 10:23 PM

What happened to the days - Falcon67 on Dec 16, 2008, 9:30 AM

sometimes - Tom P on Dec 16, 2008, 9:45 AM

No AA,AZ, or CSK in Canada.... - Rory McNeil on Dec 16, 2008, 10:14 AM

Canadian Tire - Ian on Dec 16, 2008, 11:57 PM

Ian They List a 1968 Mustang 427 - Howie on Dec 17, 2008, 5:27 AM

I seldom go into "Retarded" or "Autozonked" but sometimes... - Bob Sprowl on Dec 16, 2008, 6:01 AM

What a "sick bunch" that hangs out @ Ford FE. Bob that's almost cruel - qikBBstang on Dec 16, 2008, 2:19 PM

C7ME block acquired View Thread - blzrrod on Dec 15, 2008, 1:20 PM

No difference Mercury to Ford - Royce on Dec 15, 2008, 1:35 PM

thanks - blzrrod on Dec 15, 2008, 4:17 PM

DIY Porting View Thread - qikBBstang on Dec 15, 2008, 12:31 PM

Well the old junk let me down again View Thread - Bill Ballinger on Dec 15, 2008, 11:40 AM

Sounds like a dirty - DaleP on Dec 15, 2008, 11:53 AM

Re: Well the old junk let me down again - Earl on Dec 15, 2008, 11:59 AM

Sounds like the kids needs ...... - Kerry Johnson on Dec 15, 2008, 12:01 PM

Yes, I agree, I don't see any show-stoppers here. First, don't scrap a car for a bad... - David F. on Dec 15, 2008, 12:28 PM

He is just a very busy young man, and we put that car together - Bill Ballinger on Dec 15, 2008, 1:14 PM

Thanks guys. I'm calming down. - Bill Ballinger on Dec 15, 2008, 12:28 PM

It's running again. Don't set down the latte. - Bill Ballinger Jr. on Dec 15, 2008, 1:25 PM

Spoken like a true gentleman - Bill Ballinger on Dec 15, 2008, 2:07 PM

Bill Jr....Don't make me pull this car over... - Tommy-T on Dec 15, 2008, 2:30 PM

LOL! - Kerry Johnson on Dec 15, 2008, 2:42 PM

He's a chip off the old block, LOL - Bill Ballinger on Dec 15, 2008, 3:04 PM

He's gonna be just fine... - Kerry Johnson on Dec 15, 2008, 4:39 PM

Here's my take on the subject, Bill - Rich Ferguson on Dec 15, 2008, 1:14 PM

Thats the truth. - Bill Ballinger on Dec 15, 2008, 2:36 PM

Hang in there Bill, everybody has issues with anything mechanical..... - Cody Ladowski on Dec 15, 2008, 1:31 PM

For Bill JR. - Bob Hasty on Dec 15, 2008, 3:30 PM

At least when the "old junk" breaks down you.... - Andy (Oz) on Dec 15, 2008, 3:30 PM

My daughter just totaled her '98 Contour - Bill Ballinger on Dec 15, 2008, 4:15 PM

Is this the Contour you replaced the tranny in? - Dave King on Dec 15, 2008, 9:20 PM

Yeah, I think its cursed or something - Bill Ballinger on Dec 16, 2008, 2:41 AM

True, but thats never happened - Ian on Dec 15, 2008, 5:20 PM

Re: Well the old junk let me down again - John on Dec 15, 2008, 11:08 PM

that is crap - David Ventura on Dec 16, 2008, 7:47 AM

I'm young and still get those feelings - Lucas Massengale on Dec 16, 2008, 12:52 PM

Re: I'm young and still get those feelings - Bobg on Dec 16, 2008, 1:10 PM

The primary cause is something I was born with - Bill Ballinger on Dec 16, 2008, 6:24 PM

I'll also add, I actually was a very good driver despite my deficiencies - Bill Ballinger on Dec 17, 2008, 8:13 AM

I look at these old Cars like I do a pet .... - Beoweolf on Dec 16, 2008, 3:31 PM

I do too - Bill Ballinger on Dec 16, 2008, 8:32 PM

rocker stands View Thread - nixobilly on Dec 15, 2008, 10:54 AM

same - Tom P on Dec 15, 2008, 11:04 AM

Yes, they are different - Royce on Dec 15, 2008, 11:05 AM

Re: Yes, they are different - Dennis Carrico on Dec 15, 2008, 3:27 PM

well..... - XR7 on Dec 15, 2008, 6:22 PM

Re: well..... - Dennis Carrico on Dec 15, 2008, 9:10 PM

so..... - Anonymous on Dec 15, 2008, 9:36 PM

I agree with Dennis..... - Glenn on Dec 16, 2008, 1:42 AM

rocker stands - nixobilly on Dec 15, 2008, 11:23 AM

You can buy them here: - Royce on Dec 15, 2008, 11:35 AM

Re: You can buy them here: - nixobilly on Dec 15, 2008, 12:29 PM

What about the top link? - Dave Shoe on Dec 15, 2008, 9:30 PM

Barry R + others how about commenting on the long stroke short rod combination that Kaase View Thread - qikBBstang on Dec 15, 2008, 10:46 AM

I think most of that low-end torque is from a combo of.... - Brent on Dec 15, 2008, 1:28 PM

68 Mustang clutch linkage question View Thread - LanceH on Dec 15, 2008, 9:37 AM

Mine is in the middle and back - DaleP on Dec 15, 2008, 9:57 AM

Thanks - LanceH on Dec 15, 2008, 10:38 AM

pivot holes - Cory on Dec 15, 2008, 4:56 PM

rivnuts - Tom P on Dec 15, 2008, 8:38 PM

My 67 Mustang... - LanceH on Dec 16, 2008, 6:15 AM

Jay Brown how's the big SOHC doing? View Thread - jeff on Dec 15, 2008, 7:32 AM

Jay while your on the "How's the......." any new dates on The FE Book? n/m - qikBBstang on Dec 15, 2008, 7:37 AM

When is his book coming out????? - Wes Adams Ford428CJ on Dec 15, 2008, 7:41 AM

I'm making everyone a special deal on Ruby Red Slippers - qikBBstang on Dec 15, 2008, 7:55 AM

Only guys I've ever heard of that wear ruby red slippers play for the other team. - Dave Eames on Dec 15, 2008, 8:22 AM

Trying really hard for April... - Jay Brown on Dec 15, 2008, 8:05 AM

Off the dyno at the moment... - Jay Brown on Dec 15, 2008, 8:03 AM

Jay if you ever saw RWJs SOHC intake collection I'd imagine - qikBBstang on Dec 15, 2008, 8:15 AM

Thanks for the update - jeff on Dec 15, 2008, 9:05 AM

Lightweight vehicle for Jay's Cammer View Thread - DaleP on Dec 14, 2008, 9:57 PM

That�s ridiculous, Dale� - Tom Delaney on Dec 15, 2008, 5:06 AM

non FE - Gord Bradley on Dec 15, 2008, 6:16 AM

Kinda got a - Falcon67 on Dec 15, 2008, 7:04 AM

toploader clutch questions View Thread - Tom V on Dec 14, 2008, 8:20 PM

Some pictures would be helpful, but - DaleP on Dec 14, 2008, 10:06 PM

Engine Masters Floodgate is Open View Thread - Doug on Dec 14, 2008, 7:32 PM

LOLw/"OHCs and Cast Intake".with cast intakes for DOHC Mod Fords/Mopar Hemi's - qikBBstang on Dec 15, 2008, 5:32 AM

They didn't just open it up a bit. They kicked the door in. - Barry R on Dec 15, 2008, 6:59 AM

Wow...maybe some 816" Boss engines! - Bob on Dec 15, 2008, 7:28 AM

Can't really complain about rules because the real world today is DOHCs - qikBBstang on Dec 15, 2008, 7:36 AM

And why am I not surprised LOL - Wes Adams Ford428CJ on Dec 15, 2008, 7:39 AM

define "cast" please. Most LS motors use plastic intakes Ithought? - T on Dec 15, 2008, 9:49 AM

wonder if they'll let the Y-guys run - davis on Dec 15, 2008, 9:53 AM

averaging rules - Tom P on Dec 15, 2008, 11:29 AM

Like Barry said.... - Bob on Dec 15, 2008, 12:00 PM

DEANs427's engine on the dyno View Thread - Jay Brown on Dec 14, 2008, 6:16 PM

Re: DEANs427's engine on the dyno - steve on Dec 14, 2008, 6:52 PM

Carbs? - RJP on Dec 14, 2008, 6:52 PM

Time to acid port those cast manifolds? - Bob on Dec 14, 2008, 7:06 PM

I'd think acid porting would be a real mess if not near impossible - qikBBstang on Dec 15, 2008, 6:21 AM

Actually BB.....ExtrudeHone or Acid Porting - Bob on Dec 15, 2008, 7:00 AM

I personally internally sand blasted my own CJ Manifolds - qikBBstang on Dec 15, 2008, 7:32 AM

Dave Vizard may not agree with you BB: - Bob on Dec 15, 2008, 7:38 AM

I obviously failed to state that my key objection was the so called Acid Eating Iron - qikBBstang on Dec 15, 2008, 8:10 AM

Acid porting is done and it works.. - DaleP on Dec 15, 2008, 9:48 AM

What kind of acid eats iron in bulk form? I'm thinking the working acid would be diluted - qikBBstang on Dec 15, 2008, 10:53 AM

as far as I know... - Tom P on Dec 16, 2008, 9:52 AM

Partly true..... - Bob on Dec 16, 2008, 11:24 AM

For the open minded.... - Bob on Dec 15, 2008, 11:01 AM

My mind is full of holes, and I'd think that - DaleP on Dec 15, 2008, 11:38 AM

Actually its nitric acid........ - Bob on Dec 15, 2008, 11:50 AM

And there we have all we need to know.. - DaleP on Dec 15, 2008, 11:56 AM

Was Nice to see no drop in Performance - Faron Rhoads on Dec 14, 2008, 7:14 PM

Impressive - paul metzgar on Dec 14, 2008, 8:58 PM

Very impressive! - Barry Byer on Dec 14, 2008, 10:17 PM

Jay "a PICTURE is worth a 1000 words" sure be great to see that beast in Dr Browns' HP Lab - qikBBstang on Dec 15, 2008, 7:14 AM

Nice job Jay and thanks Dean! - Wes Adams Ford428CJ on Dec 15, 2008, 7:29 AM

or should it be the other way around "Nice job Dean & Thanks Jay" - Wes Adams Ford428CJ on Dec 15, 2008, 7:35 AM

BIG THANK YOU to ...... - DEANs427 on Dec 15, 2008, 11:58 AM

427 - FeWedge on Dec 15, 2008, 12:09 PM

Hmmmm, sure looks like Peter's (pmw) old 427 Comet ... View Thread - Bob on Dec 14, 2008, 5:39 PM

It is Pete's old car - Barry Byer on Dec 14, 2008, 10:19 PM

Great car for a NSS race car.. - DaleP on Dec 14, 2008, 10:24 PM

or a scam? - Tom P on Dec 15, 2008, 1:26 AM

It is - Barry Byer on Dec 15, 2008, 6:46 AM

That link set off my antivirus bigtime... - Rich Ferguson on Dec 15, 2008, 3:57 AM

I strongly suggest NOT clicking on that link! n/m - Rich Ferguson on Dec 15, 2008, 5:07 AM

No problems with the link - Bob Hasty on Dec 15, 2008, 5:25 AM

Re: No problems with the link - Rich Ferguson on Dec 15, 2008, 5:32 AM

yup.. - pmw on Dec 15, 2008, 5:41 AM

trap - Gord Bradley on Dec 15, 2008, 6:25 AM

Here's a better link - Royce on Dec 15, 2008, 6:01 AM

O/T: Opinions/facts needed about stolen vehicle recovery. My first 63 Galaxie....... View Thread - Rod C on Dec 14, 2008, 12:16 PM

Re: O/T: Opinions/facts needed about stolen vehicle recovery. My first 63 Galaxie....... - Jeff Tepper on Dec 14, 2008, 12:40 PM

I agree with Jeff - Earl on Dec 14, 2008, 1:14 PM

recovery - Gene on Dec 14, 2008, 2:11 PM

Rod, do you think ... - Dennis on Dec 14, 2008, 2:52 PM

Thanks everyone. It does make sense that insurance company becomes the owner. I doubt..... - Rod C on Dec 14, 2008, 3:13 PM

with that VIN, shoulda been an R code!! - Jeff on Dec 14, 2008, 9:02 PM

Well Jeff, I did buy it from my uncle with a 63 LR in it, LOL........n/m. - Rod C on Dec 15, 2008, 5:39 AM

When my 48 Indian was stolen,,,,,, - garry on Dec 14, 2008, 3:54 PM

speaking of theft - Tom J. on Dec 14, 2008, 4:19 PM

MIA generator - Mike on Dec 15, 2008, 6:14 AM

Pretty much everything said is true but I will add... - Hawkrod on Dec 14, 2008, 4:20 PM

Rod, here is a link to a story you should find encouraging. - David F. on Dec 14, 2008, 6:45 PM

Thanks Dave, with the way my luck has been going this year, getting the'missing link'..... - Rod C on Dec 15, 2008, 5:53 AM

Rod I think you will be "shit out of luck" if the insurance company paid you for the loss - qikBBstang on Dec 15, 2008, 7:49 AM

Rod, if your lost car should turn up, the insurance issue could well be a problem, but... - David F. on Dec 15, 2008, 12:25 PM

Do you still have the title? If not i'd - StarlinerRon on Dec 16, 2008, 9:23 PM

Part ID needed. I have a mechanical Carter fuel pump, blue in color, 'X', and........ View Thread - Rod C on Dec 14, 2008, 11:58 AM

Not enough info - Hawkrod on Dec 14, 2008, 12:14 PM

I guess if I'd used a brass brush earlier I might have seen it. It's still....... - Rod C on Dec 14, 2008, 12:30 PM

If it is 4441 you have a winner - Hawkrod on Dec 14, 2008, 4:21 PM

The date appeared to be the '1039A' I posted, but a better look shows it as '10B9A'...... - Rod C on Dec 14, 2008, 7:10 PM

Feb 10 of 69 or 79, now is time to get pictures - Hawkrod on Dec 15, 2008, 6:54 AM

Thanks Hawkrod, no photo needed, I just checked Scott's site and it........ - Rod C on Dec 15, 2008, 11:34 AM

I guess, Merry Christmas is in order then! LOL N/M - Hawkrod on Dec 15, 2008, 12:20 PM

Interesting Cross bolted main caps View Thread - Jim W on Dec 14, 2008, 11:11 AM

They might be Pro-Gram - FElony on Dec 14, 2008, 6:35 PM

Pro-Gram caps.... - Anonymous on Dec 14, 2008, 8:52 PM

well... - XR7 on Dec 15, 2008, 12:12 PM

Garlits returning to Drag Racing View Thread - Earl on Dec 14, 2008, 11:06 AM

Well at least he is going to race it. - Alan Casida on Dec 14, 2008, 9:39 PM

Personally, I couldn't care less about - DaleP on Dec 14, 2008, 10:11 PM

Ford 427 FE CAM identification View Thread - Dan on Dec 14, 2008, 8:49 AM

Shelby logo from the seventies on the box - Royce on Dec 14, 2008, 9:51 AM

Royce, that logo goes farther back than the 70's - Hawkrod on Dec 14, 2008, 11:46 AM

Hawkrod, youre correct, - john vermeersch on Dec 14, 2008, 2:22 PM

Wow I was way off LOL! - Royce on Dec 15, 2008, 4:39 AM

SF-63 was - john vermeersch on Dec 14, 2008, 11:55 AM

I have a number of used SF-63 cams, but they were just plain - Bill Ballinger on Dec 14, 2008, 3:36 PM

SF - 63 - pmw on Dec 15, 2008, 7:32 AM

Vic Hubbard ?? - John on Dec 14, 2008, 6:27 PM

Vic Hubbard ... - RJP on Dec 14, 2008, 6:55 PM

I'd avoid it.... - RJP on Dec 14, 2008, 9:55 AM

The price is too high regardless of the spec, JMO, .........n/m - Rod C on Dec 14, 2008, 11:37 AM

I believe the original price.... - KenS on Dec 14, 2008, 12:41 PM

Oh, but you get what appear to be USED valve springs with it... LOL! - Pippin on Dec 14, 2008, 1:45 PM

by pass hose diam. early/late? View Thread - tommy on Dec 14, 2008, 8:42 AM

Re: by pass hose diam. early/late? - Rory McNeil on Dec 14, 2008, 10:54 AM

The 58/59 hose - john vermeersch on Dec 14, 2008, 12:20 PM

Re: by pass hose diam. early/late? - tommy on Dec 15, 2008, 6:16 AM

Re: by pass hose diam. early/late? - Ray Hillebrand on Dec 14, 2008, 12:08 PM

The water pump with the long snout - Bob Hasty on Dec 15, 2008, 9:24 AM

SOHC into Ford Fairmont - Questions View Thread - Jay Brown on Dec 14, 2008, 8:22 AM

I think it would fit easily except for headers - Mario428 on Dec 14, 2008, 8:33 AM

Thanks Mario... - Jay Brown on Dec 14, 2008, 10:17 AM

Fairmont is a back half car - Mario428 on Dec 14, 2008, 11:15 AM

Jay, I have a 64 Fairlane wagon you could put it in! - garry on Dec 14, 2008, 8:47 AM

That would be cool... - Jay Brown on Dec 14, 2008, 10:19 AM

Re: SOHC into Ford Fairmont - Questions - Randall on Dec 14, 2008, 9:07 AM

lotsa room except.... - Scott66gta on Dec 14, 2008, 10:03 AM

Thanks! Those pics help a lot... - Jay Brown on Dec 14, 2008, 10:23 AM

Re: Thanks! Those pics help a lot... - Randall on Dec 14, 2008, 11:03 AM

I remember a SF article about a B9 fairmont... - michael on Dec 14, 2008, 11:22 AM

Already been done... - RJP on Dec 14, 2008, 10:01 AM

Thanks... - Jay Brown on Dec 14, 2008, 10:24 AM

-1 for the bobcat/pinto - michael on Dec 14, 2008, 10:41 AM

consider this - Bob Hasty on Dec 14, 2008, 12:07 PM

Prestigious Pinto - Gary B on Dec 14, 2008, 2:02 PM

How about in my 69 Fairlane? - Doug S on Dec 14, 2008, 12:21 PM

Jay, Found it.... - RJP on Dec 14, 2008, 12:23 PM

I recall at least two - Tom P on Dec 14, 2008, 12:38 PM

I guess Rory is still at Dale's... - Tom P on Dec 14, 2008, 12:40 PM

I guess Rory is still at Dale's... - Tom P on Dec 14, 2008, 12:41 PM

I'm pretty sure Rory left. At least I didn't notice him while - DaleP on Dec 14, 2008, 1:00 PM

Was Rory riding his motorcycle up and down the stairway? - Gary B on Dec 14, 2008, 3:27 PM

Jay, FWIW, the.... - KenS on Dec 14, 2008, 1:10 PM

How about a Falcon?? - Jody Aberts on Dec 14, 2008, 1:17 PM

Maybe a Cammer in a '65 Mustang - Alan Casida on Dec 14, 2008, 1:35 PM

Jay, have you considered an 05-07 Mustang for the SOHC? - D hearne on Dec 14, 2008, 1:53 PM

Kasse put a Boss 429 in a 2008... - Dave Walters on Dec 14, 2008, 2:34 PM

I vote for a 66 F100 n/m - Tim Mc on Dec 14, 2008, 2:16 PM

Nope! Gotta' be a Maverick Pro-Stock clone..... - Bob on Dec 14, 2008, 3:03 PM

Looks like it fits in here with no mods to shock towers - SnakeOnWheels on Dec 14, 2008, 3:19 PM

FE Fairmont numbers - Rory McNeil on Dec 14, 2008, 4:21 PM

Great! Thanks for all the info Rory... - Jay Brown on Dec 14, 2008, 4:47 PM

66-79 Shortbox 2WD F100 truck would be killer! n/m - Josh on Dec 14, 2008, 5:57 PM

How about a 66-67 Fairlane - steve on Dec 14, 2008, 3:21 PM

What you really need is something ... - Bob Sprowl on Dec 14, 2008, 4:34 PM

Maverick - Steve Corbin on Dec 14, 2008, 4:37 PM

Thanks for all the responses... - Jay Brown on Dec 14, 2008, 4:55 PM

Cammer in a pinto - Damon on Dec 14, 2008, 5:59 PM

pinto - john on Dec 17, 2008, 6:06 PM

Talk to Mr Bob or Bill Glidden - Rick Lake on Dec 15, 2008, 3:02 AM

I think you could fit TWO Cammers in a ... - Dave King on Dec 14, 2008, 7:42 PM

I know a guy with a '72 Ranchero GT he's wanting to sell (think it's a 429 car) - Larry Hampton on Dec 14, 2008, 7:53 PM

Hey Jay, if you have access to Hot Rod Archieve's - Damon on Dec 15, 2008, 12:22 AM

Turn it around and stick it in the GT n/m - Neville (Australia) on Dec 15, 2008, 12:37 AM

69 Shelby - Kerry on Dec 15, 2008, 3:49 AM

69 Shelby's do make a cool looking race car, but - DaleP on Dec 15, 2008, 9:51 AM

here it is anyway - Kerry on Dec 15, 2008, 1:53 PM

Dale... when it's done? - Tom P on Dec 15, 2008, 3:08 PM

I believe it is now.... has a BBF 598 and Lenco in it..... - XR7 on Dec 15, 2008, 5:43 PM

Do the Bobcat - rcodecj Nick on Dec 15, 2008, 5:50 PM

Buy a Fairmont Futura and - Joe D. Craine on Dec 15, 2008, 6:27 PM

Yeah Jay, you can lighten the Futura by making it a Fuchero, LOL, I'm going to bed now.n/m - Rod C on Dec 15, 2008, 11:19 PM

No one listened! Jay from Economics/Pizzazz point.......and Kick-ass-fast-SOHC - qikBBstang on Dec 16, 2008, 7:42 AM

How about an '83 Thunderbird? - thunderkiss65 on Dec 16, 2008, 3:55 PM

Regulator with Carter mech pump View Thread - Jason Engle on Dec 14, 2008, 7:43 AM

Re: Regulator with Carter mech pump - Greg on Dec 14, 2008, 7:57 AM

Likewise For Me Jason - Wreckless Warren on Dec 14, 2008, 8:37 AM

I found that I had to replace the needle/seat assemblies about once a year... - hollis franks on Dec 14, 2008, 8:43 AM

Re: I found that I had to replace the needle/seat assemblies about once a year... - Wreckless Warren on Dec 14, 2008, 8:54 AM

Re: Regulator with Carter mech pump - Anonymous on Dec 14, 2008, 9:48 AM

Heated carb spacer View Thread - Jason Engle on Dec 14, 2008, 7:41 AM

From an old.... - Bob on Dec 14, 2008, 8:29 AM

Put a ball valve in the circuit and close it for summer use. n/m - Bob Sprowl on Dec 14, 2008, 4:35 PM

Autolite 4100 carb vacum? View Thread - John on Dec 14, 2008, 6:46 AM

On the 4100 it is a ported source. No idle vacuum. - Bill Ballinger on Dec 14, 2008, 8:08 AM

the distributor vacuum - Bob C on Dec 14, 2008, 1:08 PM

Boss 302 carb spacer - Tim Mc on Dec 14, 2008, 2:21 PM

Got me an ideal! - John on Dec 15, 2008, 10:40 AM

Adjustable rocker arm conversion View Thread - Todd on Dec 13, 2008, 10:24 PM

Re: Adjustable rocker arm conversion - Anonymous on Dec 13, 2008, 11:36 PM

Re: Adjustable rocker arm conversion - Wreckless Warren on Dec 14, 2008, 7:11 AM

one option - Jason Engle on Dec 14, 2008, 7:23 AM

Detroit locker noise ,an apology View Thread - Tom J. on Dec 13, 2008, 6:27 PM

Did it shake before? - BattlestarGalactic on Dec 13, 2008, 8:50 PM

No vibration before - Tom J. on Dec 13, 2008, 9:05 PM

A couple more questions - John on Dec 13, 2008, 9:06 PM

changes - Tom J. on Dec 13, 2008, 9:49 PM

Re: changes - John on Dec 14, 2008, 2:36 PM

check the drive shaft for dents - Bob C on Dec 14, 2008, 4:46 AM

Or at least take it... - BattlestarGalactic on Dec 14, 2008, 5:10 AM

Axle Pads are available here - Royce on Dec 14, 2008, 6:32 AM

Thanks Royce - Tom J. on Dec 14, 2008, 4:55 PM

Probably the driveshaft... - Dr. Mabuse on Dec 14, 2008, 8:44 AM

Drove it around some more today - Tom J. on Dec 14, 2008, 4:12 PM

OT-how much throttle shaft side play is acceptable on a Holley? View Thread - rcodecj Nick on Dec 13, 2008, 5:56 PM

more info - rcodecj Nick on Dec 14, 2008, 8:51 AM

Steve Vanderwall / Legendary Ford mag. Dec. issue View Thread - Jim Whitton on Dec 13, 2008, 5:31 PM

Re: Steve Vanderwall / Legendary Ford mag. Dec. issue - steve on Dec 13, 2008, 7:33 PM

yeah right... - pmw on Dec 14, 2008, 8:12 AM

Need a source for a new Receiver-Drier for my '66 Galaxie View Thread - Bob Sprowl on Dec 13, 2008, 4:56 PM

Have you tried Dearborn Classics??? - Wes Adams Ford428CJ on Dec 13, 2008, 5:33 PM

They don't list anything. - Bob Sprowl on Dec 13, 2008, 5:47 PM

receiver / dryer - Tom V on Dec 13, 2008, 6:04 PM

Thanks. - Bob Sprowl on Dec 13, 2008, 7:09 PM

Is a new/rebuilt Drier required, recommended or optional? - Beoweolf on Dec 14, 2008, 12:52 PM

for hawkrod View Thread - jack b fuche on Dec 13, 2008, 4:20 PM

They are all machined where teh spring goes, it depends on what it looks like - Hawkrod on Dec 14, 2008, 11:54 AM

Header ID View Thread - BohManCj on Dec 13, 2008, 4:03 PM

Do they fit - Bobby Spears on Dec 13, 2008, 4:11 PM

Re: Do they fit - BohManCj on Dec 13, 2008, 4:28 PM

Hooker 2134 shows as smallblock Vette - WerbyFord on Dec 13, 2008, 7:05 PM

FE in a 57 ford View Thread - john tolliver on Dec 13, 2008, 3:06 PM

Re: FE in a 57 ford - Rory McNeil on Dec 13, 2008, 3:15 PM

re mounts 57 fe - john tolliver on Dec 13, 2008, 5:03 PM

57 fairlane - Charles Logsdon on Dec 13, 2008, 9:22 PM

57 with 390 - john tolliver on Dec 14, 2008, 7:06 AM

Re: 57 with 390 - Scott on Dec 14, 2008, 9:01 AM

Motor mounts - Rory McNeil on Dec 14, 2008, 2:21 PM

thanks - john tolliver on Dec 14, 2008, 3:06 PM

This is off topic, but it so outraged me I thought everyone should know about this. View Thread - ford-boy on Dec 13, 2008, 2:09 PM

Re: This is off topic, but it so outraged me I thought everyone should know about this. - Robert Gile on Dec 13, 2008, 2:20 PM

Oh Man, you're in trouble now Ford-Boy. That's 'need to know' info and Americans.......... - Rod C on Dec 13, 2008, 9:26 PM

As long as this insane VAT policy is in effect,.... - ford-boy on Dec 14, 2008, 6:43 AM

IIRC, the way VAT was proposed to work in the manufacturing sector would add....... - Rod C on Dec 14, 2008, 8:19 AM

Re: IIRC, the way VAT was proposed to work in the manufacturing sector would add....... - ford-boy on Dec 14, 2008, 9:02 AM

It does not get "REBATED" - Mario428 on Dec 14, 2008, 12:21 PM

Your tax dollars at work, it made sense at the time - Bill Ballinger on Dec 14, 2008, 8:20 AM

Wow can you complicate something quickly - Mario428 on Dec 14, 2008, 8:53 AM

Funny, when I went to Israel a couple of years ago the - Inthegarge on Dec 14, 2008, 9:23 AM

I think Canada plays the game straight, there are many other countries who don't - Bill Ballinger on Dec 14, 2008, 11:50 AM

Ignorance of the law is not an excuse. - Beoweolf on Dec 14, 2008, 1:02 PM

That's about how he felt, teaching ag and importing tractors - Bill Ballinger on Dec 14, 2008, 3:21 PM

Cam bearing installation View Thread - Tim Vorick on Dec 13, 2008, 1:42 PM

Re: Cam bearing installation - Bobby Spears on Dec 13, 2008, 1:51 PM

Re: Cam bearing installation - Richard Dinsen on Dec 13, 2008, 4:03 PM

The New Ford/GM/Chrysler Company View Thread - Kerry Johnson on Dec 13, 2008, 12:46 PM

So Funny. I gotta have one! A V-3? I know Al Gore is really smart, but.... - WerbyFord on Dec 13, 2008, 2:00 PM

I figured it was coming to this!... - Dr. Mabuse on Dec 13, 2008, 2:06 PM

Funny, and sad to say, probably near the truth........................ - RonW on Dec 13, 2008, 2:53 PM

Autolite carb identification View Thread - john on Dec 13, 2008, 12:11 PM

Autolite 4100 - Kerry Johnson on Dec 13, 2008, 12:47 PM

Not 600 CFM. - Bob Sprowl on Dec 13, 2008, 2:29 PM

Thanks Bob! - Kerry Johnson on Dec 13, 2008, 2:40 PM

Pony Carbs would love for you to believe that. - Bob Sprowl on Dec 13, 2008, 3:46 PM

That may be where I saw the 600 CFM - Kerry Johnson on Dec 13, 2008, 4:37 PM

Bob were your tests wet flow or dry flow? - WerbyFord on Dec 13, 2008, 6:59 PM

Dry. - Bob Sprowl on Dec 13, 2008, 7:08 PM

I have the one off of my 352 on a 302 in the '65 Mustang - Bill Ballinger on Dec 13, 2008, 7:22 PM

Re: Autolite carb identification - Bobby Spears on Dec 13, 2008, 12:50 PM

O/T Trying to avoid "voiding" my warranty View Thread - Cliff Harmon on Dec 13, 2008, 10:54 AM

Re: O/T Trying to avoid "voiding" my warranty - mike on Dec 13, 2008, 11:11 AM

Re: O/T Trying to avoid "voiding" my warranty - Bill Holm on Dec 13, 2008, 11:17 AM

So Bill, you must be a warranty administrator for the Ford/Lincoln Mercury company's? - Dave Eames on Dec 13, 2008, 11:50 AM

Bill, what you've said.... - KenS on Dec 13, 2008, 1:09 PM

Re: So Bill, you must be a warranty administrator for the Ford/Lincoln Mercury company's? - Bill Holm on Dec 15, 2008, 8:50 AM

For the Merc - 1960 Town Vic on Dec 13, 2008, 12:37 PM

Fog lights - Rick Lake on Dec 13, 2008, 2:46 PM

FE fuel pump eccentric View Thread - Pat on Dec 13, 2008, 9:50 AM

used ones - Tom P on Dec 13, 2008, 10:17 AM

fule pump eccentric - jack b fuche on Dec 13, 2008, 4:33 PM

fuel pump ecc. - gopher on Dec 13, 2008, 5:11 PM

ZDDP treatment. Check out site... View Thread - W.KLINE on Dec 13, 2008, 8:56 AM

ZDDP-CAM SHIELD - DYNO427 on Dec 13, 2008, 10:22 AM

Re: ZDDP-CAM SHIELD - Bobby Spears on Dec 13, 2008, 1:57 PM

oil additive - DYNO427 on Dec 13, 2008, 3:21 PM

You really dont need to use it every time you do an oil change~ - Wes Adams Ford428CJ on Dec 13, 2008, 4:40 PM

I also like Kendall GT-1 20-50w oil~ - Wes Adams Ford428CJ on Dec 13, 2008, 5:26 PM

Oil Additives - DYNO427 on Dec 13, 2008, 6:03 PM

Brad-Penn racing oil - Mike Jones on Dec 14, 2008, 11:26 PM

Carburetor question for 428CJ View Thread - Tim on Dec 13, 2008, 8:46 AM

You have plenty of carb.. - DaleP on Dec 13, 2008, 9:12 AM

But - FElony on Dec 13, 2008, 9:35 AM

Re: But - Rory McNeil on Dec 13, 2008, 3:12 PM

Do you - FElony on Dec 13, 2008, 3:47 PM

Rory's trade secrets - Gary B on Dec 13, 2008, 9:34 PM

Re: Rory's trade secrets - Rory McNeil on Dec 14, 2008, 4:57 PM

Darn - FElony on Dec 14, 2008, 6:15 PM

Stockers - Rory McNeil on Dec 15, 2008, 9:20 AM

Re: Stockers - FElony on Dec 15, 2008, 5:06 PM

Try em both. I wonder if the SpeedDemon is rated at 1.0" Hg - WerbyFord on Dec 13, 2008, 10:16 AM

Well, he did say this was for a Street car.. - DaleP on Dec 13, 2008, 12:17 PM

Re: Well, he did say this was for a Street car.. - Tim on Dec 14, 2008, 8:42 PM

RWJs PRI FORDFE.COM BBQ/SOHC Extravaganza View Thread - qikBBstang on Dec 13, 2008, 8:24 AM

Dooh posted the Ed Pro Ex Port twice - sorry - qikBBstang on Dec 13, 2008, 8:29 AM

More more more - Tom P on Dec 13, 2008, 10:16 AM

John V is - Bob Hasty on Dec 13, 2008, 11:44 AM

yep... - XR7 on Dec 13, 2008, 10:45 AM

Here's the Ed Pro Intake Port and Roush/Yates Daytona Prototype 24 engine - qikBBstang on Dec 13, 2008, 1:55 PM

Walking in heaven BB - Rick Lake on Dec 13, 2008, 2:56 PM

thank you BB! - XR7 on Dec 13, 2008, 4:01 PM

XR7 Port Dimensions - qikBBstang on Dec 14, 2008, 7:50 AM

great pic - Tom P on Dec 14, 2008, 12:57 PM

Re: XR7 Port Dimensions - Jeff Colvert on Dec 15, 2008, 7:52 AM

is that scribed 2.25 valve and 400 CFM on the Pro port intake ?? - e. philpott on Dec 14, 2008, 4:25 PM

Re: is that scribed 2.25 valve and 400 CFM on the Pro port intake ?? - Jeff Colvert on Dec 15, 2008, 7:43 AM

WOW!!! - BattlestarGalactic on Dec 13, 2008, 1:03 PM

Re: WOW!!! - Charles Logsdon on Dec 14, 2008, 2:32 PM

O/T Mercury Sable wont start or run Help Please! View Thread - Matt on Dec 13, 2008, 7:25 AM

Re: O/T Mercury Sable wont start or run Help Please! - 1960 Town Vic on Dec 13, 2008, 7:38 AM

Mercury Sable wont start or run Help Please! - Tim on Dec 13, 2008, 9:24 AM

check coil pac - Steve Corbin on Dec 13, 2008, 7:58 AM

Check the codes generated by the computer - Les on Dec 13, 2008, 8:11 AM

Hey Les - Anonymous on Dec 13, 2008, 8:14 AM

Hey Les - Les on Dec 13, 2008, 9:25 AM

This has a TFI ignition not a coil pack - Bobby Spears on Dec 13, 2008, 4:09 PM

change the gas filter and start it, N/M - Chip on Dec 13, 2008, 7:48 PM

New Cobra Jet !!!!!!!!! View Thread - Bob Bufka on Dec 13, 2008, 7:12 AM

Long ago sold... - Jim on Dec 13, 2008, 8:05 AM

So much for me getting a ride in one.... - DaleP on Dec 13, 2008, 9:19 AM

o/t GT500 - Zilla_58 on Dec 13, 2008, 11:57 AM

Here ya go Bob,Think you'll like View Thread - Dan Bell on Dec 13, 2008, 6:27 AM

1 More Bob - Dan Bell on Dec 13, 2008, 6:36 AM

Wow,thanks Dan - Bobby Spears on Dec 13, 2008, 1:07 PM

Pointed shoes and pegged pants - galaxie62 on Dec 15, 2008, 2:42 AM

I've thought about including some of those vintage photos... - Bob Sprowl on Dec 13, 2008, 3:48 PM

You're welcom Bob - Dan Bell on Dec 13, 2008, 4:01 PM

Great stuff thanks for posting - Gary B on Dec 13, 2008, 9:30 PM

Scouder, where are you?? View Thread - Gary on Dec 13, 2008, 5:38 AM

Right here... - Brian Woodward on Dec 13, 2008, 7:53 AM

what pistons and pins did you use... - XR7 on Dec 13, 2008, 10:58 AM

With my trusty non-digital calipers... - Brian Woodward on Dec 13, 2008, 12:28 PM

Recently took delivery.... - KenS on Dec 13, 2008, 1:31 PM

thanks for the responses!!! - Gary on Dec 13, 2008, 3:01 PM

link to 9" posi rebuild procedure???? View Thread - Nick on Dec 13, 2008, 5:08 AM

Re: link to 9" posi rebuild procedure???? - Mike Ratterree on Dec 13, 2008, 7:29 AM

Re: link to 9" posi rebuild procedure???? - Mike Ratterree on Dec 13, 2008, 7:31 AM

Me too!!?? - DYNO427 on Dec 13, 2008, 7:50 AM

thanks Mike, just what i needed. n/m - Nick on Dec 13, 2008, 10:08 AM

Video - FElony on Dec 13, 2008, 9:34 AM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!