332-428 Ford FE Engine Forum (Page 11 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 22 Visitors 68FBMustang, 21 guests

Not logged in | Login | Create Account

Post Now!

O/T: temp reduction with coated headers. View Thread - Bob on Dec 3, 2008, 9:36 AM

Finally - Tom in Vegas on Dec 3, 2008, 3:07 PM

OT..something different, praise for paypal? View Thread - tbolt on Dec 3, 2008, 9:27 AM

Wow, I am amazed. - Hawkrod on Dec 3, 2008, 9:38 AM

isn't nice when you talk to some1 that knows there $h!t - chris on Dec 3, 2008, 9:39 AM

Phone #?? - Anthony on Dec 3, 2008, 12:40 PM

Re: Phone #?? - Tbolt on Dec 3, 2008, 10:21 PM

O/T - Something Xerox is doing for the troops! View Thread - Mark on Dec 3, 2008, 8:48 AM

Great idea !!!!!! I still remember the warmth of getting - Inthegarge on Dec 3, 2008, 9:15 AM

Thanks for the heads-up - FElony on Dec 3, 2008, 9:31 AM

Sent mine - Bill A on Dec 3, 2008, 12:25 PM

Done, thanks! n/m - Bill Ballinger on Dec 3, 2008, 1:54 PM

Thanks for letting us know about this great idea! - Myrl Morris on Dec 3, 2008, 2:29 PM

cards - moose on Dec 3, 2008, 2:36 PM

O/T what brand torque wrench do you use? View Thread - davis on Dec 3, 2008, 8:13 AM

Craftsman or Harbor Freight but always check vs a partner - WerbyFord on Dec 3, 2008, 8:28 AM

in 1/2"...... - Bob on Dec 3, 2008, 8:36 AM

Matco for me - Alan Casida on Dec 3, 2008, 9:07 AM

only snap on 3/8 1/2 and multiplier - chris on Dec 3, 2008, 9:37 AM

Snap-on - Ross on Dec 3, 2008, 10:22 AM

Just had all mine calibrated - Royce on Dec 3, 2008, 11:40 AM

Snap-On... - Gerald Beatch on Dec 3, 2008, 11:55 AM

Harbor Freight unit takes a lot of abuse, keeps on working great - Royce on Dec 4, 2008, 5:10 AM

Re: O/T what brand torque wrench do you use? - Anonymous on Dec 3, 2008, 1:01 PM

MAC digital torq - Jaymz on Dec 3, 2008, 1:28 PM

Craftsman..."Microtork"... - Dr. Mabuse on Dec 3, 2008, 3:12 PM

O/T what brand torque wrench do you use? - Tim on Dec 3, 2008, 4:53 PM

mine is a bit older.... - johannarich. on Dec 3, 2008, 9:00 PM

Header time. Opinions wanted View Thread - Alan Casida on Dec 3, 2008, 7:33 AM

If under 600hp probably no big diff - WerbyFord on Dec 3, 2008, 8:30 AM

Based on what.... - Bob on Dec 3, 2008, 9:28 AM

Werby made some generalizations that are - DaleP on Dec 3, 2008, 10:27 AM

I like a 2" primary tube too, especially mass produced - Bill Ballinger on Dec 5, 2008, 10:13 AM

O/T - C6 Rebuild Video Recommendations? View Thread - Nathan on Dec 3, 2008, 7:26 AM

Bad Shoe Videos and DVD's - Doug Bender on Dec 3, 2008, 9:08 AM

Broader Performance - rick on Dec 3, 2008, 9:13 AM

I didn't know... - Doug Bender on Dec 3, 2008, 9:45 AM

C6 video - 74ford on Dec 3, 2008, 1:18 PM

Please repost in the classifieds - thanks n/m View Thread - David Hadyniak on Dec 3, 2008, 6:26 AM

Shhhh...You need to move this to Classifieds before the Police show up, LOL......n/m - Rod C on Dec 3, 2008, 6:35 AM

LOL! Just here to serve and protect... n/m - Jay Brown on Dec 3, 2008, 6:46 AM

LOL - used to have a police friend - Falcon67 on Dec 3, 2008, 9:37 AM

Unfortunately.... - KenS on Dec 3, 2008, 8:46 PM

O/T Old Ford Racing decal View Thread - Todd on Dec 3, 2008, 3:41 AM

I have an NOS set........... - Earl on Dec 3, 2008, 6:15 AM

All the Mustang repop houses sell them - Ross on Dec 3, 2008, 9:14 AM

casting numbers View Thread - john on Dec 3, 2008, 3:15 AM

Here you go - Kerry on Dec 3, 2008, 5:12 AM

sohc valve covers View Thread - Devin on Dec 2, 2008, 11:09 PM

Carb spacer View Thread - scodemach on Dec 2, 2008, 9:34 PM

Re: Carb spacer - Richard Dinsen on Dec 2, 2008, 11:23 PM

If you are tight for space... - John Bednorz on Dec 3, 2008, 6:39 AM

Real cheap..... - Bob on Dec 3, 2008, 9:22 AM

2008 Mustang??? View Thread - Chris Whitney on Dec 2, 2008, 8:45 PM

Hmmm...Anything similar on a GT 500? ;-) (n/m) - Kim on Dec 2, 2008, 9:08 PM

cheap like Borscht - Tom P on Dec 2, 2008, 11:01 PM

Mustang prices - StarlinerRon on Dec 2, 2008, 11:45 PM

2008 Mustangs?? - Chris Whitney on Dec 3, 2008, 6:58 AM

Saleen - Tom P on Dec 3, 2008, 11:06 AM

Do you work at the dealership? (n/m) - Kim on Dec 3, 2008, 9:08 PM

rocker arm ass bolts View Thread - Jon on Dec 2, 2008, 8:05 PM

Re: rocker arm ass bolts - Ray Hillebrand on Dec 2, 2008, 8:21 PM

ASS bolts... LOL! n/m - Mike Burch on Dec 2, 2008, 11:12 PM

re:Ass Bolts, - Don Ragan on Dec 3, 2008, 7:24 PM

O/T sparkplug blowout on V10 View Thread - Phil63 on Dec 2, 2008, 7:29 PM

re sparkpug - brandon on Dec 2, 2008, 7:37 PM

Re: O/T sparkplug blowout on V10 - e. philpott on Dec 2, 2008, 7:52 PM

Re: O/T sparkplug blowout on V10 - Bill Holm on Dec 2, 2008, 9:30 PM

The internet is full of this fabulous Ford feature - 1960 Town Vic on Dec 2, 2008, 9:40 PM

Re: O/T sparkplug blowout on V10 - Mike Lay on Dec 3, 2008, 5:01 AM

Re: O/T sparkplug blowout on V10 - Mike Lay on Dec 3, 2008, 5:24 AM

Just had this happen in my 99 F250 5.4.. - greg popp on Dec 3, 2008, 5:34 AM

Warning/hint on re-thread in vehicle - Tim O'Connor on Dec 3, 2008, 7:08 AM

So, what's the consensus on why this occurs? - Bob on Dec 3, 2008, 7:58 AM

bad design - e. philpott on Dec 3, 2008, 9:23 PM

What I learned - Dsrtfox on Dec 3, 2008, 8:11 AM

The Lightnings have this problem also - Greg on Dec 3, 2008, 9:02 AM

Help with parts I.D please... View Thread - Nigel on Dec 2, 2008, 7:27 PM

on my 2 x 4's.... - johannarich. on Dec 2, 2008, 8:09 PM

All of those numbers are correct for a 67 GT500 N/M - Hawkrod on Dec 2, 2008, 9:22 PM

Re - all of those numbers correct for a 67 GT500... - Nigel on Dec 2, 2008, 10:12 PM

All sounds correct - Royce on Dec 3, 2008, 5:25 AM

C5AA-9510-A tripower center carb View Thread - jeff on Dec 2, 2008, 7:00 PM

Re: C5AA-9510-A tripower center carb - Ray Hillebrand on Dec 2, 2008, 7:12 PM

Ford Thuderbird 390 FE View Thread - Chris on Dec 2, 2008, 6:56 PM

Re: Ford Thuderbird 390 FE - Ray Hillebrand on Dec 2, 2008, 7:01 PM

Thunderbird not Thuderbird - Chris on Dec 2, 2008, 7:51 PM

Re: Thunderbird not Thuderbird - Ray Hillebrand on Dec 2, 2008, 8:25 PM

Cruiser. - Lucky on Dec 2, 2008, 9:12 PM

If it was my car - John on Dec 2, 2008, 10:06 PM

Re: Ford Thuderbird 390 FE - Franco on Dec 2, 2008, 10:07 PM

my .02... - Mark Pruitt on Dec 3, 2008, 10:05 AM

Pinks All Out View Thread - Kam on Dec 2, 2008, 6:08 PM

No but - Phil63 on Dec 2, 2008, 7:09 PM

Carb question View Thread - Charles Logsdon on Dec 2, 2008, 5:46 PM

IMO, try knocking the jets down a tad. Maybe 74P and 80S............n/m - Rod C on Dec 2, 2008, 7:08 PM

For what its worth, - john vermeersch on Dec 2, 2008, 7:12 PM

not worth the hassle for mileage. what about performance? - Charles Logsdon on Dec 2, 2008, 8:06 PM

Can't find specs on the 870 SA, Holley catalog is a misprint? - WerbyFord on Dec 2, 2008, 9:33 PM

Is the 870sa really a good old downleg 780cfm in disguise? - WerbyFord on Dec 3, 2008, 8:25 AM

The throttle body dimensions may be the same - Ross on Dec 4, 2008, 6:40 AM

1964 galaxy interior interchange? View Thread - jeff on Dec 2, 2008, 5:05 PM

You are right, there is a lot of information available. - Ray Hillebrand on Dec 2, 2008, 5:22 PM

Catalogs from Repop. sellers good cross reference - Bill Troth on Dec 2, 2008, 6:42 PM

Re: 1964 galaxy interior interchange? - mike on Dec 2, 2008, 8:00 PM

427 FE in 1965 Comet Question View Thread - Buddy Belzer on Dec 2, 2008, 4:55 PM

427 in 65 Comet - ROY POOL on Dec 2, 2008, 11:00 PM

not a newfangled 65 but... - Tom P on Dec 2, 2008, 11:12 PM

427 in a 65 Comet - RWJ on Dec 3, 2008, 2:18 AM

RWJ you're mean! - Joe D. Craine on Dec 3, 2008, 6:01 AM

a recent acquisition? - michael on Dec 3, 2008, 6:55 AM

Why am I not supprised. n/m - dedom on Dec 3, 2008, 7:00 AM

A local friend is almost finished building - DaleP on Dec 3, 2008, 9:40 AM

new cars? - Tom P on Dec 3, 2008, 12:39 PM

Wow, your pal's - Bob on Dec 3, 2008, 1:04 PM

Comet - RWJ on Dec 3, 2008, 5:28 PM

Did you try changing the headlight switch.. - DaleP on Dec 3, 2008, 6:08 PM

I think it's mostly the picture - DaleP on Dec 3, 2008, 6:11 PM

The problem is that he has.... - Scott on Dec 4, 2008, 11:08 AM

That makes sense Scott.. No plans for my junk - DaleP on Dec 4, 2008, 1:54 PM

Well I have lots of parts but I still need a few more........ - Scott on Dec 4, 2008, 2:21 PM

Destroker - Tom P on Dec 4, 2008, 2:40 PM

New Headers View Thread - RWJ on Dec 2, 2008, 4:20 PM

Cool .... - Mike Gaffney on Dec 2, 2008, 4:33 PM

WOW~ - Wes Adams Ford428CJ on Dec 2, 2008, 4:37 PM

They look nice........... - Earl on Dec 2, 2008, 5:13 PM

Re: New Headers - John on Dec 2, 2008, 10:29 PM

Headers - RWJ on Dec 3, 2008, 2:23 AM

Very Nice! Who Did The Coating? - Wreckless Warren on Dec 3, 2008, 9:53 AM

Coating - RWJ on Dec 3, 2008, 5:31 PM

you should post some pics of that car - Kyle on Dec 3, 2008, 4:02 PM

moose View Thread - fordsel on Dec 2, 2008, 3:27 PM

Fairlane - Anonymous on Dec 2, 2008, 4:10 PM

Dang Moose,I'm no Bud Kraehling but...... - F570rd on Dec 3, 2008, 5:48 AM

Bud Kraehling? - Jay Brown on Dec 3, 2008, 2:02 PM

Re: ... - moose on Dec 2, 2008, 4:13 PM

Barry R, any luck on the 4.25 forged cranks? View Thread - Gary on Dec 2, 2008, 1:53 PM

I did get some finished the other day - Barry R on Dec 2, 2008, 3:28 PM

O/T - Anybody with a 1963 Fairlane Ford shop manual? View Thread - Randy on Dec 2, 2008, 1:41 PM

Re: O/T - Anybody with a 1963 Fairlane Ford shop manual? - Dennis on Dec 2, 2008, 3:17 PM

Thanks !!! - Randy on Dec 2, 2008, 3:39 PM

Car is getting closer Body work almost done View Thread - Steve Engberg on Dec 2, 2008, 10:35 AM

Who's product? - Don on Dec 2, 2008, 11:35 AM

Product - Steve Engberg on Dec 2, 2008, 12:29 PM

Looking good - Doug on Dec 2, 2008, 12:06 PM

Painting? - Tom P on Dec 2, 2008, 1:09 PM

Blending clear coat? - Gary B on Dec 2, 2008, 2:02 PM

Thats how I do it - Ross on Dec 2, 2008, 2:08 PM

Love that unobtrusive roll cage...any more interior pics of it all? n/m - qikBBstang on Dec 2, 2008, 1:58 PM

More roll bar pics - Steve Engberg on Dec 2, 2008, 3:12 PM

sure looks legal to me! - chris on Dec 2, 2008, 3:23 PM

Great job on the cage ... - Mike Gaffney on Dec 2, 2008, 3:42 PM

What about Drag Week? - Anonymous on Dec 3, 2008, 7:37 AM

Drag Week - Steve Engberg on Dec 3, 2008, 9:47 AM

Photos of two different FE intake runner View Thread - Kimmo on Dec 2, 2008, 10:05 AM

At Columbus swap meet... - BattlestarGalactic on Dec 2, 2008, 11:23 AM

BT heads - Tom P on Dec 2, 2008, 1:04 PM

Sent you some e-mail Tom - Kimmo on Dec 2, 2008, 3:23 PM

High Riser castings - Barry R on Dec 2, 2008, 5:26 PM

What about Port-O? - Jason on Dec 3, 2008, 8:24 AM

thanks - Tom P on Dec 3, 2008, 12:45 PM

O/T: A Tuesday funny for everyone...... View Thread - Brent on Dec 2, 2008, 9:57 AM

????????????? - 427Howard on Dec 2, 2008, 10:16 AM

Does it not show up? - Brent on Dec 2, 2008, 11:19 AM

Ya, it's there. - BattlestarGalactic on Dec 2, 2008, 11:34 AM

That looks like my wife's hand writing... - Dave Walters on Dec 2, 2008, 11:39 AM

Re: That looks like my wife's hand writing... - Brad Joern on Dec 2, 2008, 4:57 PM

427 comedy of errors, I need to snivel a little.... View Thread - hollis franks on Dec 2, 2008, 9:43 AM

Darn Hollis..sorry to hear of your troubles...glad you got it running again !! - winr1 on Dec 2, 2008, 4:35 PM

Sounds like me. - Bob Sprowl on Dec 2, 2008, 4:42 PM

A Question about EDC heads - FERoadster on Dec 2, 2008, 7:09 PM

Question for you engineers ... View Thread - Mike Gaffney on Dec 2, 2008, 8:40 AM

without thinking too much - dablack on Dec 2, 2008, 9:10 AM

NOT a engineer, but - Woody Owens on Dec 2, 2008, 9:28 AM

I don't drive a train either but.... - Tom P on Dec 2, 2008, 9:35 AM

got any pics of that? - michael on Dec 2, 2008, 10:03 AM

If - Woody Owens on Dec 2, 2008, 12:23 PM

Photos - Woody Owens on Dec 2, 2008, 12:56 PM

Where are your pedals going to mount... - Dave Walters on Dec 2, 2008, 2:56 PM

Pedals & seat - Woody Owens on Dec 3, 2008, 5:36 AM

Very cool! - Dave Walters on Dec 3, 2008, 6:23 AM

thanks! - michael on Dec 2, 2008, 3:22 PM

Not an FE in Photo N/M - Dan on Dec 2, 2008, 3:57 PM

Warned ya, gonna be a SOHC - Woody Owens on Dec 3, 2008, 5:30 AM

Woody ... - Mike Gaffney on Dec 2, 2008, 11:41 AM

Re: Woody ... - Woody Owens on Dec 2, 2008, 12:19 PM

66 is ~3,500# with 55%/45% ratio on stock 108" wheelbase, with 289. Add 100#? for FE... - T on Dec 2, 2008, 9:47 AM

666 mustang weight - smoothie on Dec 2, 2008, 10:19 AM

correct . . weight is 2800-3000 in real numbers . . . - Pete's Ponies on Dec 2, 2008, 3:59 PM

What's the reasoning behind the set back? - Dave Walters on Dec 2, 2008, 11:49 AM

Need front/rear split on a stock 65-66 first, anybody? - WerbyFord on Dec 2, 2008, 12:15 PM

I guess I could call you but... - Evan Gaffney on Dec 2, 2008, 12:57 PM

Is this a drag car or some sort roundy-round deal? - Tom P on Dec 2, 2008, 1:23 PM

Lowering the Engine & Trans sounds like a nightmare - qikBBstang on Dec 2, 2008, 1:55 PM

Thanks for all the ... - Mike Gaffney on Dec 2, 2008, 4:29 PM

What you'd basically do is... - Ken Smith on Dec 2, 2008, 5:13 PM

I got the same numbers as Ken. A car length quicker? - WerbyFord on Dec 2, 2008, 10:10 PM

Who is going to the PRI Show in Orlando? View Thread - Mike Braun on Dec 2, 2008, 7:30 AM

I'll be there - Don on Dec 2, 2008, 11:27 AM

PRI - RWJ on Dec 2, 2008, 4:04 PM

PRI?? - Chris Whitney on Dec 2, 2008, 8:11 PM

I will be at booth #774 - Barry R on Dec 2, 2008, 10:05 PM

OT..Paypal question? View Thread - Tbolt on Dec 2, 2008, 7:24 AM

had once --payment being proccessed-- - chris on Dec 2, 2008, 7:33 AM

Pay PAL - John Kuhn on Dec 2, 2008, 7:37 AM

WARNING DANGER DANGER w/ PAY PAL - qikBBstang on Dec 2, 2008, 7:36 AM

Call paypal - Bob Hasty on Dec 2, 2008, 8:47 AM

Paypal - Greg on Dec 2, 2008, 10:01 AM

I just had this... - Dave Walters on Dec 2, 2008, 11:37 AM

Yup, it is legit and your buyer screwed up (guys reread Tbolt's post) - Hawkrod on Dec 2, 2008, 2:07 PM

hawkrod i was selling and listed wrong payment address - chris on Dec 2, 2008, 3:13 PM

Hawk is correct.... - Tbolt on Dec 2, 2008, 11:15 PM

This is an amazing book: "Holman Moody the legendary race team" View Thread - qikBBstang on Dec 2, 2008, 6:57 AM

427 1965 lemans - john tolliver on Dec 2, 2008, 8:23 AM

Fantastic book no doubt BB!! - Dave Walters on Dec 2, 2008, 11:30 AM

oil pump driveshaft View Thread - Jason Engle on Dec 2, 2008, 6:55 AM

For the price........cheap insurance....JMO n/m - Bill on Dec 2, 2008, 6:57 AM

Yes, call doug the PumpBuilder & buy his - Scrap Iron on Dec 2, 2008, 7:32 AM

never broke stock but broke fordmotorsport twice - chris on Dec 2, 2008, 7:37 AM

When you think about it the FoMoCo FordMotorsport FE drives were dimensionally - qikBBstang on Dec 2, 2008, 7:58 AM

Ford Power Parts offered HDTruck oil pumps that required larger dia oil pump driveshafts - qikBBstang on Dec 2, 2008, 8:06 AM

oil pump shaft - gene on Dec 2, 2008, 4:22 PM

Re: Ford Power Parts offered HDTruck oil pumps that required larger dia oil pump driveshafts - Ray Hillebrand on Dec 2, 2008, 8:17 PM

oil shaft - moose on Dec 2, 2008, 2:57 PM

Oil Tube for Intake Manifold View Thread - Paul Frost on Dec 2, 2008, 5:12 AM

You can start here. - Bill on Dec 2, 2008, 6:25 AM

transmission View Thread - 427 Howard on Dec 1, 2008, 7:07 PM

transmissions - jack b fuche on Dec 1, 2008, 7:29 PM

JPT - Joe D. Craine on Dec 1, 2008, 8:05 PM

Jim's IT when it comes to the C-4.... - KenS on Dec 1, 2008, 8:08 PM

Re: transmission - Anonymous on Dec 2, 2008, 8:22 AM

What do you mean?? - 427Howard on Dec 2, 2008, 9:49 AM

Re: What do you mean?? - Anonymous on Dec 2, 2008, 10:38 AM

Oh Stop It! Stop It Faster!! View Thread - FElony on Dec 1, 2008, 7:01 PM

Re: Oh Stop It! Stop It Faster!! - Cobrabill on Dec 1, 2008, 7:07 PM

I could certainly use better brakes, but - DaleP on Dec 1, 2008, 7:40 PM

Cheap shoes work best - Rich Bailey on Dec 1, 2008, 7:50 PM

i remember reading on here awhile back.... - robert on Dec 1, 2008, 9:04 PM

some thoughts - Tom P on Dec 1, 2008, 9:23 PM

Calibloc - Bart on Dec 1, 2008, 9:37 PM

Re: some thoughts - FElony on Dec 1, 2008, 9:50 PM

Manhood - Gary B on Dec 2, 2008, 7:41 AM

Re: Manhood - FElony on Dec 3, 2008, 10:11 AM

exactly! - Tom P on Dec 3, 2008, 12:51 PM

Drilling drums, holes in backing plates...... - Bob on Dec 2, 2008, 6:00 AM

Hey Bob the Baer Brakes' 13.2" aluminum hub/steel rotor, PBR dual puck hat front disc - qikBBstang on Dec 2, 2008, 7:10 AM

Here you go! - Bob on Dec 2, 2008, 7:37 AM

I have had excelent results with Porterfield linings - 68GT500 on Dec 1, 2008, 10:13 PM

Porterfield brakes - Jake R on Dec 2, 2008, 7:14 AM

Re: excelent results with Porterfield linings and stock drums? - qikBBstang on Dec 2, 2008, 7:25 AM

Drilled drums / Porterfield R4S - Scott Allard on Dec 2, 2008, 8:39 AM

Cool article: - Bob on Dec 2, 2008, 8:57 AM

How aboot 3" drums from a wagon or R Code? Before I put... - hollis franks on Dec 2, 2008, 9:05 AM

Hey Hollis... - Bob on Dec 2, 2008, 9:15 AM

The brakes - Tom P on Dec 2, 2008, 9:58 AM

'65 Mustang with a jar - MeanGene on Dec 2, 2008, 1:34 PM

I have manual disc brakes - ezgoing on Dec 2, 2008, 10:01 AM

pressure plate bolts View Thread - Jon on Dec 1, 2008, 6:52 PM

YES jon ! ! use arp torque spec's - chris on Dec 1, 2008, 6:55 PM

New FE Rocker Stands View Thread - FElony on Dec 1, 2008, 6:43 PM

felony they look like nice stands. - chris on Dec 1, 2008, 6:53 PM

Re: felony they look like nice stands. - FElony on Dec 1, 2008, 9:25 PM

proceed with caution... - robert on Dec 1, 2008, 9:06 PM

You're firewall blocked Ebay? - Josh on Dec 1, 2008, 9:09 PM

no the tinyurl code.... - robert on Dec 1, 2008, 9:12 PM

Re: no the tinyurl code.... - FElony on Dec 1, 2008, 9:35 PM

goes to eBay for me too. - Tom P on Dec 1, 2008, 9:35 PM

Not just seen - I carry them too - Barry R on Dec 2, 2008, 3:10 AM

I prefer stands with the 'kerf' cut, like the original steel stands have, JMO.....n/m - Rod C on Dec 2, 2008, 4:06 AM

One "problem"?... - Dr. Mabuse on Dec 3, 2008, 4:31 AM

toploader applications View Thread - jeff on Dec 1, 2008, 5:28 PM

torino and mustang are differant trans - chris on Dec 1, 2008, 6:16 PM

toploaders - jeff on Dec 1, 2008, 6:32 PM

Re: toploaders - Howie on Dec 1, 2008, 6:43 PM

agree with howie thing change. - chris on Dec 1, 2008, 6:49 PM

Transmissions - Frank Bowers on Dec 1, 2008, 7:12 PM

31 spline - jeff on Dec 1, 2008, 8:58 PM

Possible - Frank Bowers on Dec 1, 2008, 10:40 PM

NOT from a Talladega! - Rory McNeil on Dec 1, 2008, 11:38 PM

rory right auto only. if no tag the length will help. - chris on Dec 2, 2008, 7:43 AM

Ghost of Holley Past View Thread - FElony on Dec 1, 2008, 4:39 PM

Now thats coooooool!!!!~ - Wes Adams Ford428CJ on Dec 1, 2008, 5:29 PM

Re: Now thats coooooool!!!!~ - Bobby Spears on Dec 1, 2008, 5:56 PM

new 4010 - Tom P on Dec 1, 2008, 5:59 PM

Re: new 4010 - FElony on Dec 1, 2008, 6:37 PM

I ran a 4010 for awhile, and they are a good carb - Bill Ballinger on Dec 1, 2008, 6:59 PM

Sounds like - Dsrtfox on Dec 1, 2008, 5:57 PM

So do I. - Bob Sprowl on Dec 1, 2008, 6:16 PM

I sure do like those carbs!~ - Wes Adams Ford428CJ on Dec 2, 2008, 4:44 PM

dual 30cc accelerator pump!?...n/m - Dr. Mabuse on Dec 1, 2008, 6:36 PM

i have one - fordsel on Dec 1, 2008, 7:09 PM

Re: Ghost of Holley Past - Anonymous on Dec 1, 2008, 7:47 PM

Good carb - glad to see someone try it again - Falcon67 on Dec 2, 2008, 6:24 AM

Detail possible? - WerbyFord on Dec 2, 2008, 12:21 PM

I hope they re-pop the 2 barrels too... - Tommy-T on Dec 2, 2008, 8:53 AM

Beehaive TBD! - Bill Ballinger on Dec 2, 2008, 9:52 AM

I liked them carbs a lot. - Barry Gaugler on Dec 2, 2008, 5:09 PM

FE Built for Towing View Thread - John on Dec 1, 2008, 4:00 PM

Probably - Barry R on Dec 1, 2008, 5:27 PM

Nice set-up,keep us posted on the progress.n/m - bbr60 on Dec 2, 2008, 9:32 AM

question for hawkrod View Thread - john tolliver on Dec 1, 2008, 2:53 PM

Yeah, I am into Stude's and that is how I got my screen name, I have a 59 Silver Hawk - Hawkrod on Dec 1, 2008, 3:12 PM

My Grandfather Bought A New 1955 President Speedster - Wreckless Warren on Dec 2, 2008, 7:17 AM

We have a local Stude truck that is FE powered and - Inthegarge on Dec 1, 2008, 5:26 PM

Nicest Stude I ever saw - Barry R on Dec 1, 2008, 5:51 PM

Re: Nicest Stude I ever saw - Rory McNeil on Dec 1, 2008, 11:43 PM

55' President/55' Pickup - Irv on Dec 2, 2008, 10:35 AM

For Past, Present, and Future FE Forum Combatants View Thread - FElony on Dec 1, 2008, 2:45 PM

FElony? - Earl on Dec 1, 2008, 3:21 PM

On Parole? - Trevor on Dec 1, 2008, 4:55 PM

Re: On Parole? - FElony on Dec 1, 2008, 5:07 PM

El Felonio rides again - Dsrtfox on Dec 1, 2008, 5:52 PM

It's good that your back. - Jim on Dec 1, 2008, 7:03 PM

Re: It's good that your back. - FElony on Dec 1, 2008, 7:21 PM

Yep - Jim on Dec 1, 2008, 7:24 PM

Sure, but a post like that will likely get him - DaleP on Dec 1, 2008, 7:43 PM

Re: Sure, but a post like that will likely get him - FElony on Dec 1, 2008, 7:59 PM

There's nobody like.... - KenS on Dec 1, 2008, 8:16 PM

Hey I know this guy LOL - Kerry on Dec 2, 2008, 4:35 AM

Keyboard Kombat - Falcon67 on Dec 2, 2008, 6:25 AM

Photos View Thread - Falconred on Dec 1, 2008, 2:21 PM

2008/2009 Big Block Ford Winter Tech Seminar View Thread - Damon Sea on Dec 1, 2008, 12:15 PM

Anyone ever been to this? - John Kuhn on Dec 1, 2008, 1:39 PM

Tech Seminar - Damon Sea on Dec 2, 2008, 4:57 AM

New post about thread that went south below View Thread - Hawkrod on Dec 1, 2008, 10:51 AM

Always appreciate the information you supply - Gary B on Dec 1, 2008, 11:03 AM

I figured you had a brain-fart and that 'Skinny' could defend himself. Your....... - Rod C on Dec 1, 2008, 11:17 AM

I understood from your first reply you were not referring to "Skinny's" post as stupid.. - winr1 on Dec 1, 2008, 11:53 AM

Isn't there a rule here about how many times.. - DaleP on Dec 1, 2008, 11:49 AM

whaaa..whaaa...what'd i miss? - Tom P on Dec 1, 2008, 12:35 PM

The only thing - Dsrtfox on Dec 1, 2008, 12:32 PM

That isn't true - Hawkrod on Dec 1, 2008, 12:42 PM

I didn't say - Dsrtfox on Dec 1, 2008, 6:00 PM

Well, since you put it that way..... - Hawkrod on Dec 1, 2008, 7:08 PM

I think it's good that Hawkrod cleared the air... - Dave Walters on Dec 1, 2008, 1:26 PM

I missed it too - Bob Hasty on Dec 1, 2008, 3:56 PM

Hawkrod is always - Kerry on Dec 2, 2008, 6:05 AM

I agree. - rcodecj Nick on Dec 2, 2008, 6:08 PM

Clevite exhaust valves still good ?? made in the USA ??? 211-2461 View Thread - Richard Winters on Dec 1, 2008, 9:12 AM

Aluminum Toploader? View Thread - Bob on Dec 1, 2008, 6:12 AM

David Kee sells them. He had the aluminum cases and tailhousings made up. - Brent on Dec 1, 2008, 6:26 AM

Thanks, Brent - Bob on Dec 1, 2008, 6:38 AM

History Lesson & Surprising there is no additional external beef added to Alum TopLoader - qikBBstang on Dec 1, 2008, 8:03 AM

".....top-loading left the TL in last as far a ease of repair and service vs...." LOL.... - Rod C on Dec 1, 2008, 8:34 AM

That one is a Dave Kee Toploader,,,,, - garry on Dec 1, 2008, 9:40 AM

hp capability - ron b on Dec 1, 2008, 6:28 PM

Not as many..... - Bob on Dec 2, 2008, 7:14 AM

David Kee makes me scratch my head... - Dave Walters on Dec 1, 2008, 9:54 AM

You'd also like - Barry R on Dec 1, 2008, 10:30 AM

Ironic isn't it.... - Dave Walters on Dec 1, 2008, 12:12 PM

A lawyer that defends himself ... has a fool for a client. - Beoweolf on Dec 1, 2008, 12:22 PM

And Jim (of JPT) raced for Chrysler... - Dr. Mabuse on Dec 1, 2008, 2:44 PM

I wondered about that as well, Dave.. - DaleP on Dec 1, 2008, 12:42 PM

I totally agree Dale... - Dave Walters on Dec 1, 2008, 4:06 PM

I kind of recall the Alum internal rail 4spds originally used in later 70s FoMoCos - qikBBstang on Dec 2, 2008, 7:54 AM

Pre build plan for 390 looking for tips and suggestions. View Thread - Scott on Dec 1, 2008, 4:02 AM

If I were going to spec out a 445 here's what I would do - Bill Ballinger on Dec 1, 2008, 6:49 AM

that sounds great - Kyle on Dec 1, 2008, 8:14 AM

You may be right, but I think the 294S with the 9.8:1 CR - Bill Ballinger on Dec 1, 2008, 9:24 AM

Billy-Boy, you are a BAD influence... - Tommy-T on Dec 1, 2008, 8:56 AM

One of Billy's friends had a '72 F100 he put a 460 in - Bill Ballinger on Dec 1, 2008, 10:17 AM

n/m - Anonymous on Dec 1, 2008, 3:07 PM

A Bullet solid roller like the one I got from you would kill too - Bill Ballinger on Dec 1, 2008, 6:53 PM

How much HP are you looking for? - Jay Brown on Dec 1, 2008, 3:47 PM

How much horse power??? - Scott on Dec 1, 2008, 6:39 PM

Rob (GChief) on the forum did one - Ross on Dec 1, 2008, 6:55 PM

For even 450 HP you'll need some pretty good heads - Jay Brown on Dec 1, 2008, 7:04 PM

You guys got some good stout numbers out of those two - Bill Ballinger on Dec 1, 2008, 7:31 PM

We ran 11.5:1 on both engines - Jay Brown on Dec 2, 2008, 7:46 AM

That's pretty good. Really the main difference was just the airflow - Bill Ballinger on Dec 2, 2008, 9:15 AM

Reading with interest - FERoadster on Dec 2, 2008, 10:28 AM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!