332-428 Ford FE Engine Forum (Page 13 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 22 Visitors 68FBMustang, 21 guests

Not logged in | Login | Create Account

Post Now!

C5AA-9510-A View Thread - jeff on Nov 28, 2008, 3:37 PM

Nope, and it should not be C5AA either, check it again - Hawkrod on Nov 28, 2008, 4:04 PM

nopeit should not be c5aa either - jack b fuche on Nov 30, 2008, 7:20 PM

c5aa-9510-a - jack b fuche on Nov 30, 2008, 8:42 PM

c5aa-9510-a new list2436 holley 65 replacement fe - jack b fuche on Nov 30, 2008, 8:48 PM

Edelbrock/ARP head bolt torque revisted View Thread - Richard Dinsen on Nov 28, 2008, 3:20 PM

110 / 100 - Royce on Nov 28, 2008, 4:36 PM

So you think that's where Edelbrock got it? - Richard Dinsen on Nov 28, 2008, 5:08 PM

That's what I do - Royce on Nov 28, 2008, 5:12 PM

Thanks... - Richard Dinsen on Nov 28, 2008, 5:15 PM

Re: Edelbrock/ARP head bolt torque revisted - Wreckless Warren on Nov 28, 2008, 4:48 PM

I like 80, anybody else? n/m - Richard Dinsen on Nov 28, 2008, 5:12 PM

Re: I like 80, anybody else? n/m - Charles Logsdon on Nov 28, 2008, 5:45 PM

Here Are Previous Posts On This - Wreckless Warren on Nov 29, 2008, 7:27 AM

How about ARP studs with Eboks? - Anonymous on Nov 29, 2008, 9:20 AM

1/2 way down this page and still no concensus... - Richard Dinsen on Nov 29, 2008, 5:21 PM

Depends on block and head materials - Rick Lake on Nov 30, 2008, 3:56 AM

engine antifreeze ? View Thread - rick on Nov 28, 2008, 2:57 PM

excellent deduction - Tom P on Nov 28, 2008, 4:32 PM

Re: engine antifreeze ? - Anonymous on Nov 28, 2008, 4:34 PM

I've had no problems when draining my 427 at the lower pump bolt holes. The....... - Rod C on Nov 28, 2008, 5:23 PM

Re: engine antifreeze ? - Ray Hillebrand on Nov 28, 2008, 5:33 PM

use to be a 390 4 speed car - rick on Nov 28, 2008, 5:37 PM

Very , Veryn O/T I am VERY P.O'd at American Express View Thread - Cliff Harmon on Nov 28, 2008, 2:44 PM

Amex has been on my "list" for a while... - Barry R on Nov 28, 2008, 3:30 PM

Re: credit - Anonymous on Nov 28, 2008, 3:52 PM

wont take amex - bykpainter on Nov 28, 2008, 3:55 PM

Re: wont take amex - Ray Hillebrand on Nov 28, 2008, 5:42 PM

amex - RWJ on Nov 29, 2008, 4:20 AM

Credit cards - Rory McNeil on Nov 29, 2008, 10:27 AM

FE Maverick headers View Thread - custom300 on Nov 28, 2008, 1:55 PM

Re: FE Maverick headers - Alan Casida on Nov 28, 2008, 2:32 PM

Maverick platform - custom300 on Nov 28, 2008, 3:28 PM

maverick headers - gopher on Nov 28, 2008, 3:35 PM

Maverick? - Tom P on Nov 28, 2008, 4:37 PM

Are you sure? - Anonymous on Nov 28, 2008, 7:01 PM

Re: Are you sure? - Rory McNeil on Nov 28, 2008, 7:33 PM

Rory is right - Alan Casida on Nov 28, 2008, 9:10 PM

May have been Nick Zuk's Maverick? John V's memory is sharper than mine on Zuk's........ - Rod C on Nov 28, 2008, 8:36 PM

Doubt it! - Bob on Nov 29, 2008, 7:41 AM

Maybe it was the very rare 302 Windsor - Bob on Nov 29, 2008, 12:18 PM

Mark McMullen @ M & R Motorsports? View Thread - John P on Nov 28, 2008, 1:51 PM

Thanks everyone for all the good ideas. View Thread - Max Packer on Nov 28, 2008, 12:02 PM

Who's Going to Columbus this weekend? View Thread - Rick on Nov 28, 2008, 10:02 AM

I WILL BE THERE!!! - edgar 427 on Nov 28, 2008, 10:36 AM

I expect to be there - Barry R on Nov 28, 2008, 11:50 AM

Hope to see you Barry - Royce on Nov 28, 2008, 4:39 PM

Most Likely Sunday - David Jacobs on Nov 28, 2008, 6:12 PM

Dang Barry... - BattlestarGalactic on Nov 29, 2008, 6:58 PM

newby lives here - bykpainter on Nov 28, 2008, 2:17 PM

I'll be there.. - BattlestarGalactic on Nov 28, 2008, 3:21 PM

newby....again - bykpainter on Nov 28, 2008, 3:52 PM

car inspection View Thread - Gene on Nov 28, 2008, 9:05 AM

questions View Thread - brandon on Nov 28, 2008, 7:07 AM

My WAG - Ross on Nov 28, 2008, 7:55 AM

I built a .030-over 390.... - KenS on Nov 28, 2008, 8:48 AM

more info - brandon on Nov 28, 2008, 9:35 AM

Good rule of thumb - Ross on Nov 28, 2008, 11:14 AM

Jiggy? - RJP on Nov 28, 2008, 8:15 PM

LOL - Ross on Nov 29, 2008, 6:37 AM

another question - brandon on Nov 29, 2008, 8:02 AM

CR HP - Joe D. Craine on Nov 29, 2008, 8:32 AM

No - Tommy-T on Nov 30, 2008, 11:12 AM

re: no - brandon on Nov 30, 2008, 7:38 PM

105 Octane - Joe D. Craine on Dec 2, 2008, 6:47 AM

Tbolt pic View Thread - RWJ on Nov 28, 2008, 5:56 AM

Bolt - Jim on Nov 28, 2008, 7:56 AM

Is it THAT Don Bowles? - Tom P on Nov 28, 2008, 10:21 AM

Anymore T-bolt photos??? - Jody Aberts on Nov 28, 2008, 11:15 AM

i've got one.... - johannarich. on Nov 28, 2008, 3:39 PM

i have that car - buddy r on Nov 29, 2008, 6:05 AM

How about pictures of the engine! - Josh on Nov 29, 2008, 12:08 PM

Josh - buddy r on Nov 29, 2008, 12:44 PM

Re Conner Ford T-Bolt - Dennis on Nov 29, 2008, 3:33 PM

More on stroker kits View Thread - Doug Bender on Nov 28, 2008, 4:27 AM

You sure they are Scat? - Brent on Nov 28, 2008, 4:59 AM

Balancing and rods - Aaron J. Benham on Nov 28, 2008, 5:18 AM

Lock & load - Barry R on Nov 28, 2008, 8:56 AM

Your insights are very much appreciated. Thanks. n/m - Dave Shoe on Nov 28, 2008, 12:40 PM

Barry, sent you a mail @ survival... - Nick on Nov 28, 2008, 3:17 PM

390 View Thread - Troy La Mana on Nov 27, 2008, 10:37 PM

Been there, call Survival Motorsports - Dan on Nov 28, 2008, 12:44 AM

I second that motion - Bill Ballinger on Nov 28, 2008, 4:35 AM

390 stroker kits - Keith Craft on Nov 28, 2008, 1:43 AM

Anybody know anything about this emblem......... View Thread - Sohcbob on Nov 27, 2008, 9:57 PM

It is a Mustang Mach I roof emblem with a sticker or insert in it - Hawkrod on Nov 27, 2008, 10:35 PM

Thx Hawkrod n/m Bob - Sohcbob on Nov 28, 2008, 7:28 PM

GOBBLE....GOBBLE View Thread - John on Nov 27, 2008, 8:46 PM

:-) - ezgoing on Nov 27, 2008, 9:47 PM

O/T: New GT500KR - w/ Not to be driven on public roads or highways View Thread - qikBBstang on Nov 27, 2008, 6:41 PM

Yeah, kinda strange, like letting dealers get their hands on new T-Bolts 45 yrs ago....n/m - Rod C on Nov 27, 2008, 7:10 PM

so what's the story? - Tom P on Nov 27, 2008, 8:04 PM

Re: so what's the story? - r on Nov 28, 2008, 7:54 AM

Evergreen Ford - Tom P on Nov 28, 2008, 10:28 AM

Re: O/T: New GT500KR - w/ Not to be driven on public roads or highways - Bill Holm on Nov 27, 2008, 10:07 PM

Not unusual to ship - john vermeersch on Nov 28, 2008, 6:45 AM

Re: O/T: New GT500KR - w/ Not to be driven on public roads or highways - r on Nov 28, 2008, 7:53 AM

Re: O/T: New GT500KR - w/ Not to be driven on public roads or highways - r on Nov 28, 2008, 8:07 AM

Mustangs - Tom P on Nov 28, 2008, 10:38 AM

Block Repair pics.. View Thread - DaleP on Nov 27, 2008, 6:28 PM

Looks like ... - Mike Gaffney on Nov 27, 2008, 6:33 PM

Please let us know how much the block was "tweeked" - qikBBstang on Nov 27, 2008, 6:49 PM

Looks good. Going to use a girdle? Looks like a prime candidate for one..JMO...n/m - Rod C on Nov 27, 2008, 7:13 PM

Cool! - Jay Brown on Nov 27, 2008, 10:08 PM

Please elaborate on the tube in the oil galley,,,,, - garry on Nov 28, 2008, 3:56 AM

Maybe There Is Still Hope For This CJ Block - Wreckless Warren on Nov 28, 2008, 6:04 AM

Answers.. I did not do the repair myself .. - DaleP on Nov 28, 2008, 7:05 AM

We have been welding cast iron for years - Ross on Nov 28, 2008, 8:11 AM

Back in, I think, '01.... - KenS on Nov 28, 2008, 9:03 AM

Great job! - BattlestarGalactic on Nov 28, 2008, 3:26 PM

Yes, nice looking job Dale!..My Dad used to and my Brother still brazes cast iron..... - winr1 on Nov 28, 2008, 5:33 PM

Strokin View Thread - steve meyer on Nov 27, 2008, 6:20 PM

Hi winders are fun .... - Mike Gaffney on Nov 27, 2008, 6:29 PM

There's a lot of science involved in the effects of a longer stroke - qikBBstang on Nov 27, 2008, 7:05 PM

oops - steve meyer on Nov 27, 2008, 7:21 PM

A few thoughts... - Jay Brown on Nov 27, 2008, 8:16 PM

Very nice perspective n/m - Bill Ballinger on Nov 28, 2008, 4:37 AM

Legends die hard - Barry R on Nov 28, 2008, 3:22 AM

I am coming around to the idea better all the time - Bill Ballinger on Nov 28, 2008, 3:56 AM

How much H.P.? - Jim on Nov 28, 2008, 8:07 AM

Don't know - Barry R on Nov 28, 2008, 9:40 AM

A Year????!!!! - Jim on Nov 28, 2008, 11:00 AM

Oversquare - FElony on Nov 28, 2008, 10:26 AM

Under round ?? - DaleP on Nov 29, 2008, 8:26 PM

MR 427 2x4 intake info View Thread - Boss429KK1708 on Nov 27, 2008, 3:29 PM

Re: MR 427 2x4 intake info - Bobby Spears on Nov 27, 2008, 3:47 PM

Re: MR 427 2x4 intake info - Boss429KK1708 on Nov 27, 2008, 4:42 PM

Re: MR 427 2x4 intake info - Bobby Spears on Nov 27, 2008, 5:08 PM

Re: MR 427 2x4 intake info - Don Woodruff on Nov 27, 2008, 3:59 PM

Re: MR 427 2x4 intake info - steve on Nov 27, 2008, 4:59 PM

Jim, did you - john vermeersch on Nov 27, 2008, 6:10 PM

Yes, Im with John - farnorth on Nov 28, 2008, 7:14 AM

Re: MR 427 2x4 intake info - r on Nov 28, 2008, 8:10 AM

'65 Header Test-Fit Fail View Thread - Max Packer on Nov 27, 2008, 2:42 PM

What i'd do... - Tom P on Nov 27, 2008, 3:07 PM

Thanks, Tom - Max Packer on Nov 27, 2008, 3:25 PM

a different idea - 1960 Town Vic on Nov 27, 2008, 4:34 PM

Much easier said than done - Tom P on Nov 27, 2008, 5:22 PM

Not easy - 1960 Town Vic on Nov 27, 2008, 7:28 PM

Love the responses guys. Keep 'em coming. - Max Packer on Nov 27, 2008, 6:09 PM

Which begs the question.. - DaleP on Nov 27, 2008, 6:35 PM

Well, they did make a header that fits.... - Mark Pruitt on Nov 27, 2008, 7:23 PM

Would it be easier/better to mill of half the thickness of the flange face?. Pretty ...... - Rod C on Nov 27, 2008, 7:23 PM

Good idea till they leak... - Mark Pruitt on Nov 27, 2008, 7:52 PM

And another thought - 1960 Town Vic on Nov 27, 2008, 7:32 PM

I'm with Town Vic on this one... - Jay Brown on Nov 27, 2008, 10:16 PM

On my Tbird..... - Dan W on Nov 27, 2008, 8:23 PM

What about 1/8 - 1/4 in spacers under the motor mounts? N/M - Scott on Nov 27, 2008, 9:00 PM

At first I would make sure that .... - 68GT500 on Nov 27, 2008, 11:32 PM

If a Tbird had bent shock towers it would be time to scrap it - Hawkrod on Nov 28, 2008, 1:39 PM

The :original" shock tower comment was a joke... - Mark Pruitt on Nov 28, 2008, 5:18 PM

Got it. - Max Packer on Nov 29, 2008, 12:57 AM

Initial Break-in done - wont idle - Very Strange! View Thread - Nathan on Nov 27, 2008, 1:28 PM

Two things - Ross on Nov 27, 2008, 1:36 PM

Everything fresh. . . - Nathan on Nov 27, 2008, 1:44 PM

Still not definitely the carb - Ross on Nov 27, 2008, 2:18 PM

If a vacume leak. . ? - Nathan on Nov 27, 2008, 2:39 PM

if it has a dual plane - e. philpott on Nov 27, 2008, 3:01 PM

Well - Ross on Nov 27, 2008, 3:03 PM

it's #6. . . - Nathan on Nov 27, 2008, 5:48 PM

Intake - Ross on Nov 27, 2008, 8:15 PM

Thanks Ross - Nathan on Nov 27, 2008, 9:50 PM

start with a vacuum gage - Jason Engle on Nov 27, 2008, 1:42 PM

Jason did you get a pass for the NPD Silver Springs Ford Show? - qikBBstang on Nov 27, 2008, 7:07 PM

Re: Jason did you get a pass for the NPD Silver Springs Ford Show? - Jason Engle on Nov 28, 2008, 12:19 PM

Special (Note) to all FE and A/FX racers View Thread - Boss429KK1708 on Nov 27, 2008, 1:00 PM

Hey Jim, Happy Thanksgiving to you and yours also!! - winr1 on Nov 27, 2008, 2:38 PM

Hey Wes....if you would have started the "Poor mans427" with a thick wall 390 block .... View Thread - winr1 on Nov 27, 2008, 12:16 PM

What - Tom in Vegas on Nov 27, 2008, 1:06 PM

It runs and now we are going to drop it in the car.~ - Wes Adams Ford428CJ on Nov 27, 2008, 7:07 PM

We started off with a very thick Block. Used a 330 D4 Block!~ - Wes Adams Ford428CJ on Nov 27, 2008, 6:59 PM

distributor mounted timing cover... View Thread - nitrocrew on Nov 27, 2008, 12:13 PM

I've seen that done with a marine timing cover - Jay Brown on Nov 27, 2008, 12:38 PM

Re: distributor mounted timing cover... - Boss429KK1708 on Nov 27, 2008, 1:12 PM

the Nicson - Tom P on Nov 27, 2008, 3:12 PM

Interesting... - Jay Brown on Nov 27, 2008, 8:34 PM

why not just buy a belt-drive front-mount distributor from Jegs? - xie on Nov 28, 2008, 5:06 PM

Flexplate Woes View Thread - Bob on Nov 27, 2008, 11:21 AM

Something not sounding right, - john vermeersch on Nov 27, 2008, 11:27 AM

Your scenario is not totally clear to me.......................... - RonW on Nov 27, 2008, 11:46 AM

Thank you everyone - Bob on Nov 27, 2008, 12:06 PM

Bob, what - Don Ragan on Nov 27, 2008, 6:55 PM

flex - coogs on Nov 27, 2008, 8:38 PM

FE forum get-together on Saturday 11-29-08 late afternoon evening View Thread - Gary B on Nov 27, 2008, 10:23 AM

I will show up~ - Wes Adams Ford428CJ on Nov 27, 2008, 10:33 AM

Get on the train Wes - Gary B on Nov 27, 2008, 10:36 AM

I totally would Gary but~ - Wes Adams Ford428CJ on Nov 27, 2008, 10:56 AM

Wes, We will get together, I promise you that. - dedom on Nov 27, 2008, 10:38 AM

Right on Dedom!!!! - Wes Adams Ford428CJ on Nov 27, 2008, 11:04 AM

I'll have a photo album of my project - dedom on Nov 27, 2008, 10:34 AM

Happy Thanks Giving to you!~ - Wes Adams Ford428CJ on Nov 27, 2008, 11:06 AM

Wes, here is an offer you can't refuse. - dedom on Nov 27, 2008, 1:59 PM

I'm trying but I don't want to end up... - Barry Byer on Nov 27, 2008, 2:56 PM

i'm a definate maybe - Tom P on Nov 27, 2008, 3:24 PM

I'm unlikely to make it.. - DaleP on Nov 27, 2008, 6:32 PM

Work - Jim on Nov 27, 2008, 7:17 PM

not this time-again... - Mark Pruitt on Nov 27, 2008, 7:32 PM

I`ll be there, Gary. - Rory McNeil on Nov 28, 2008, 11:17 AM

Sounds good Rory - Gary B on Nov 28, 2008, 2:36 PM

Can't make it... - Barry Byer on Nov 29, 2008, 3:08 PM

'Twas a good time - Gary B on Nov 30, 2008, 11:41 AM

Autolite Dual Point Set-up Question View Thread - Nathan on Nov 27, 2008, 12:03 AM

Dist. set-up - DEAN FORSTER on Nov 27, 2008, 4:51 AM

What I've done. - Bob Sprowl on Nov 27, 2008, 7:09 AM

If I remember correctly - Harry H on Nov 27, 2008, 9:44 AM

it should run fine at .018 - e. philpott on Nov 27, 2008, 9:55 AM

Start up - coogs on Nov 27, 2008, 9:00 PM

i can't get pics to work. got the file uploaded. just the insert doesn't go. View Thread - howard on Nov 26, 2008, 5:02 PM

i'll try at home.. - howard on Nov 26, 2008, 5:05 PM

Try Photobucket - paul metzgar on Nov 26, 2008, 8:09 PM

Network 54 pics seem to be working again.... - Jay Brown on Nov 27, 2008, 7:04 AM

If it'll work for me, it'll work for ANY... - Tommy-T on Nov 27, 2008, 8:51 AM

A Shout-Out to all the lurkers out there...HAPPY THANKSGIVING ! ! ! View Thread - Marty Haynes on Nov 26, 2008, 4:56 PM

Happy Thanksgiving! - John Kuhn on Nov 26, 2008, 5:01 PM

Same wishes here, I'm running my jaws all the time - Bill Ballinger on Nov 26, 2008, 5:28 PM

what Im thankful for - kelly on Nov 26, 2008, 6:48 PM

Me too. I would have lost my religion without my friends here - Bill Ballinger on Nov 26, 2008, 7:22 PM

Happy Thanksgiving - Frank Bowers on Nov 26, 2008, 9:44 PM

Happy Thanksgiving all!!..I am also glad you are here Bill... - winr1 on Nov 26, 2008, 11:50 PM

Happy Thanksgiving, in Memory of my late Uncle Don - Bob Hasty on Nov 27, 2008, 6:31 AM

To your Uncle Don - Bill Ballinger on Nov 28, 2008, 3:43 AM

Gosh...I'm thankful that.... - Tommy-T on Nov 27, 2008, 9:07 AM

We Have Allot To Be Thankfull For So Lets Celebrate - Wreckless Warren on Nov 27, 2008, 6:39 AM

Happy Thanksgiving to all my pals on the FE Forum! - Jay Brown on Nov 27, 2008, 7:07 AM

O.K ...You got me....I'm a lurker.......most of the time. HAPPY THANKSGIVING ALL. n/m - Bill on Nov 27, 2008, 7:54 AM

Happy Thanksgiving indeed - ezgoing on Nov 27, 2008, 8:31 AM

Re: A Shout-Out to all the lurkers out there...HAPPY THANKSGIVING ! ! ! - Jeff F on Nov 27, 2008, 9:03 AM

Happy Thanksgiving to everyone! - Bunko5300 on Nov 27, 2008, 9:11 AM

Happy Thanksgiving - Barry R on Nov 27, 2008, 9:27 AM

A Special "Hey" to the - FElony on Nov 27, 2008, 10:17 AM

Back at ya Rick - Cliff Harmon on Nov 27, 2008, 11:37 AM

Good to hear from the lone wolves out there - Barry R on Nov 27, 2008, 12:17 PM

Happy Thanksgiving, I know of at least one - Ross on Nov 27, 2008, 10:45 AM

Thanks for the intro - Danny on Dec 1, 2008, 6:55 PM

If you have your loved ones... - Mike on Nov 27, 2008, 12:33 PM

Happy Thanksgiving - Tom J. on Nov 27, 2008, 1:05 PM

Hope that you had a "Happy Thanksgiving" also. - Damon on Nov 27, 2008, 4:57 PM

OT, But need help View Thread - Kam on Nov 26, 2008, 4:51 PM

Window - jmdjr67 on Nov 26, 2008, 5:15 PM

a little more info - Carnut427 on Nov 26, 2008, 7:36 PM

2004 F-150 window - Falcon67 on Nov 26, 2008, 10:57 PM

And Ford wonders why they have trouble selling cars - 1960 Town Vic on Nov 26, 2008, 7:58 PM

wouldn't want to miss a chance to take another shot at Ford... - Mark Pruitt on Nov 27, 2008, 10:27 AM

I agree - Don Ragan on Nov 27, 2008, 7:01 PM

Most all car co's use this setup now - StarlinerRon on Nov 27, 2008, 2:10 PM

1930's technology. - 1960 Town Vic on Nov 27, 2008, 4:44 PM

well, as F-150's are the BEST SELLING VEHICLE IN THE WORLD - Mark Pruitt on Nov 27, 2008, 7:46 PM

Oh well then, that justifies it. eom - 1960 Town Vic on Nov 27, 2008, 9:17 PM

Ford buys their small parts, latches, window regulators, etc. from Tier Suppliers, who.... - Rod C on Nov 27, 2008, 7:36 PM

Yep. If you get a Tier catalog you would be surprised - Bill Ballinger on Nov 28, 2008, 4:33 AM

Kam, here is the best place to buy............... - RonW on Nov 26, 2008, 9:23 PM

Window - jmdjr67 on Nov 27, 2008, 4:08 AM

New to forums, putting 428 in 1965 Thunderbird View Thread - Max Packer on Nov 26, 2008, 4:26 PM

Welcome to the "Legion of the Doomed"... - Mark Pruitt on Nov 26, 2008, 5:35 PM

1966 TBird here - Dan W on Nov 26, 2008, 6:25 PM

Girls can do it! - Tommy-T on Nov 27, 2008, 9:17 AM

Obviously a staged photo!... - Dr. Mabuse on Nov 27, 2008, 9:48 AM

Thanks for the Responses - Max Packer on Nov 26, 2008, 7:48 PM

Shock Tower relief... pictures please? - Mark Pruitt on Nov 27, 2008, 4:50 AM

Not a T-Bird but may help. - John on Nov 27, 2008, 9:59 AM

58 Birds were build to hold a - StarlinerRon on Nov 27, 2008, 2:27 PM

Funny you should mention... - Max Packer on Nov 27, 2008, 3:50 PM

That's what I like to hear! - Ryan on Nov 26, 2008, 9:04 PM

Hi Ryan, how about.... - Mark Pruitt on Nov 27, 2008, 4:58 AM

Next time I see it, I'll take some measurements... - Ryan on Nov 28, 2008, 7:48 PM

RPM intake - MeanGene on Nov 26, 2008, 10:45 PM

Hey Max!!... - winr1 on Nov 26, 2008, 11:55 PM

intake issues.....long..... - Mark Pruitt on Nov 27, 2008, 4:41 AM

Manifolds - MeanGene on Nov 27, 2008, 8:50 AM

the MR 2x4 might have an issue also... - Mark Pruitt on Nov 27, 2008, 10:22 AM

...seem to remember an article on a Tasca 427... - Ryan on Nov 28, 2008, 7:45 PM

The round headlights might answer another question.. - Mark Pruitt on Nov 29, 2008, 4:42 AM

OT PLasma cutter/Tig View Thread - John on Nov 26, 2008, 2:34 PM

make sure you stay away from the smaller plasma cutters.. - Mike U. on Nov 26, 2008, 2:46 PM

Similar story here - Don K. on Nov 26, 2008, 3:29 PM

Plasma - chrish on Nov 26, 2008, 3:39 PM

I got both a pc and a MIG from.... - KenS on Nov 26, 2008, 4:15 PM

plasma cutters - Tiemann larry on Nov 26, 2008, 6:18 PM

I bought one of these for around $300 - Mike Burch on Nov 26, 2008, 9:51 PM

Re: I bought one of these for around $300 - mikegt500 on Nov 26, 2008, 10:32 PM

Plasma cutter - David Bonnell on Nov 27, 2008, 12:06 PM

67 427 Fairlane NHRA factoring... View Thread - Dave Walters on Nov 26, 2008, 2:23 PM

usually SS/C - Tom P on Nov 26, 2008, 3:23 PM

Re: 67 427 Fairlane NHRA factoring... - Rusty Gillis on Nov 26, 2008, 3:36 PM

Thanks for the info guys... - Dave Walters on Nov 26, 2008, 4:36 PM

Come on out - Stephen & Horace Johnson on Nov 26, 2008, 11:38 PM

I've got to get back in the swing of things again... - Dave Walters on Nov 27, 2008, 12:34 PM

Pinks All Out! coming to California View Thread - RiverRacer on Nov 26, 2008, 2:15 PM

Re: Pinks All Out! coming to California - Boss429KK1708 on Nov 27, 2008, 1:20 PM

Pinks sure has morphed into something far from where it started - qikBBstang on Nov 27, 2008, 7:22 PM

Happy turkey day to everyone, Drive carefully so we are all back here... View Thread - David F. on Nov 26, 2008, 1:47 PM

Re: Happy turkey day to everyone, Drive carefully so we are all back here... - Posford on Nov 26, 2008, 2:38 PM

Nice truck - ezgoing on Nov 27, 2008, 8:40 AM

Re: Nice truck - Posford on Nov 28, 2008, 4:17 PM

'68 t-bird motor - 428? View Thread - jeff kristofick on Nov 26, 2008, 12:57 PM

Look on the back of the block... - Ryan on Nov 26, 2008, 1:15 PM

Probably a 390 or 429. 428s weren't available in TBirds that year. - Dave Shoe on Nov 26, 2008, 1:26 PM

probably talking about a 429 Thunderjet . . . n/m - PetesPonies on Nov 26, 2008, 1:54 PM

429? - jeff kristofick on Nov 26, 2008, 2:03 PM

Not a big following for the 429 Thunderjets. - Dave Shoe on Nov 26, 2008, 7:33 PM

428 68 Tbirds - Rory McNeil on Nov 26, 2008, 9:14 PM

Yeah, I had a 68 Q code Bird as well - Hawkrod on Nov 27, 2008, 8:43 AM

I have a 429-4V - MeanGene on Nov 27, 2008, 8:55 AM

429 is the motor - Lowell on Nov 27, 2008, 10:15 AM

Better heads ... - Mike Gaffney on Nov 27, 2008, 6:22 PM

if it's a 429 TJ..... - ford429cjlover on Nov 28, 2008, 4:08 AM

'68 t'bird 428 - jeff on Nov 30, 2008, 3:48 PM

Finned Valve Covers on 361 FE View Thread - Lucky on Nov 26, 2008, 12:45 PM

Re: Finned Valve Covers on 361 FE - Posford on Nov 26, 2008, 2:36 PM

Anybody have "Super Ford" mag November 1980? View Thread - Lars on Nov 26, 2008, 12:19 PM

earliest SF I have is - PetesPonies on Nov 26, 2008, 1:55 PM

1980 i think would be black/white paper back? - chris on Nov 26, 2008, 1:59 PM

Maybe Vol 5? - Lars on Nov 26, 2008, 2:07 PM

ok that narrow the field for looking. - chris on Nov 26, 2008, 2:12 PM

got that - Tom P on Nov 26, 2008, 3:26 PM

Do you want to .... - W.KLINE on Nov 26, 2008, 4:08 PM

I'd be in the market.... - KenS on Nov 26, 2008, 4:42 PM

Ken, I've got - Tom P on Nov 26, 2008, 4:54 PM

O/T Glue removal from concrete floor View Thread - Anonymous on Nov 26, 2008, 6:48 AM

Try a high-output hair dryer, wife shouldn't mind, LOL. Soften the glue and scrape....... - Rod C on Nov 26, 2008, 6:52 AM

How old is it? Is it black? Several adhesives used to contain asbestos - Hawkrod on Nov 26, 2008, 7:33 AM

House built in 1982 - Anonymous on Nov 26, 2008, 7:39 AM

Yes..... - Bob on Nov 26, 2008, 8:38 AM

Yes, the sanding scared the pants off me! LOL - Hawkrod on Nov 26, 2008, 9:08 AM

Asbestos use was stopped by 1978............n/m - Rod C on Nov 26, 2008, 9:50 AM

That is absolutely false, it is a common myth and too many people fall for it - Hawkrod on Nov 26, 2008, 10:17 AM

some info from the government..... - Hawkrod on Nov 26, 2008, 10:21 AM

The friability of glue containing asbestos seems remote and may have allowed continue use. - Rod C on Nov 26, 2008, 10:29 AM

You are right, I wasn't clear enough using the word "use". "Manufacturing"...... - Rod C on Nov 26, 2008, 10:25 AM

Re: O/T Glue removal from concrete floor - Ray Hillebrand on Nov 26, 2008, 7:59 AM

Brake fluid - howard on Nov 26, 2008, 9:26 AM

RE: Glue removal from concrete floor - Mike Gray on Nov 26, 2008, 11:03 AM

glue removal - Gene on Nov 26, 2008, 5:19 PM

glue - john on Nov 27, 2008, 2:51 AM

You could... - StarlinerRon on Nov 27, 2008, 3:08 PM

headers for thunderbird FE 390 vs. cast Iron logs View Thread - andy on Nov 26, 2008, 6:43 AM

on my t-bird i used fpa - Kyle on Nov 26, 2008, 7:20 AM

FPA link: - Bob on Nov 26, 2008, 8:26 AM

headers - andy on Nov 26, 2008, 6:12 PM

Andy.... - Bob on Nov 27, 2008, 7:47 AM

If it's a bone stock 390/"300" I wouldn't bother - WerbyFord on Nov 26, 2008, 9:54 AM

That's true.... - Bob on Nov 26, 2008, 10:18 AM

scary like this? - Erik Van Vechten on Nov 26, 2008, 11:16 AM

Nice! - Bob on Nov 26, 2008, 11:22 AM

Re: If it's a bone stock 390/"300" I wouldn't bother - Rory McNeil on Nov 26, 2008, 9:20 PM

Here's another story.... - KenS on Nov 26, 2008, 4:39 PM

A general rule on X-overs... - Dr. Mabuse on Nov 27, 2008, 9:10 AM

BB do you still have any fuel pumps ? View Thread - garry on Nov 26, 2008, 4:05 AM

Yes eMail Sent n/m - qikBBstang on Nov 27, 2008, 12:17 PM

Werby, could you run my engine through your Gonkulator please? View Thread - Doug M. on Nov 25, 2008, 10:16 PM

Under 600hp, or over... - WerbyFord on Nov 26, 2008, 9:24 AM

Gonkulator? - DEAN FORSTER on Nov 26, 2008, 10:23 AM

Home grown from Ann Arbor, used to be long winters there - WerbyFord on Nov 26, 2008, 11:01 AM

History of the Gonkulator in the USAF - Ross on Nov 26, 2008, 12:05 PM

Ross - Irv on Nov 26, 2008, 12:22 PM

Well - Ross on Nov 26, 2008, 12:36 PM

Nellis AFB is the only place I know where.... - WerbyFord on Nov 26, 2008, 6:41 PM

Re: Nellis AFB is the only place I know where.... - Doug M. on Nov 26, 2008, 7:23 PM

Yes indeed - Ross on Nov 26, 2008, 9:03 PM

Gonkulator - Dr. Mabuse on Nov 27, 2008, 9:28 AM

Ahhh very good - Ross on Nov 27, 2008, 10:47 AM

roll bars View Thread - jack b fuche on Nov 25, 2008, 8:28 PM

If positioned correctly... - Dave Walters on Nov 26, 2008, 5:45 AM

Re: If positioned correctly... - jack b fuche on Nov 26, 2008, 7:49 AM

Re: roll bars - Rusty Gillis on Nov 26, 2008, 11:00 AM

Pinion snubber on a 70 Mustang View Thread - Ross on Nov 25, 2008, 7:47 PM

Pretty sure they did - Tom P on Nov 25, 2008, 10:53 PM

Ive got one off of a '70 CJ stang - pmw on Nov 26, 2008, 5:04 AM

yes, n/m - Don Ragan on Nov 26, 2008, 7:40 AM

Yes N/M - rcodecj Nick on Nov 26, 2008, 5:51 PM

welding SS exhaust View Thread - Tom V on Nov 25, 2008, 7:23 PM

Stainless .... - Mike Gaffney on Nov 25, 2008, 7:28 PM

stainless - Wes tanner on Nov 25, 2008, 8:52 PM

think you will have to change wire? - chris on Nov 26, 2008, 2:14 PM

Re: think you will have to change wire? - Rex on Nov 26, 2008, 3:04 PM

By all means, use SS wire! n/m KS - KenS on Nov 26, 2008, 4:47 PM

Mild steel wire will work but.... - trz1000 on Nov 26, 2008, 6:52 PM

9 inch setup View Thread - Brandon on Nov 25, 2008, 7:04 PM

If it was good before, should be good now - Ross on Nov 25, 2008, 7:49 PM

Re: If it was good before, should be good now - Brandon on Nov 25, 2008, 7:51 PM

Engine Stand? View Thread - Kerry Johnson on Nov 25, 2008, 7:00 PM

there decent - Jaymz on Nov 26, 2008, 1:20 AM

Stand - RWJ on Nov 26, 2008, 4:45 AM

The Harbor Freight one - Robert Tolleson on Nov 26, 2008, 6:01 AM

They also have this one, and its cheaper to ship - 1960 Town Vic on Nov 26, 2008, 6:21 AM

Sunex Stand - Kerry Johnson on Nov 26, 2008, 7:12 AM

I Have The Sunex Stand - Warren on Nov 26, 2008, 8:48 AM

look at AJAX engine stand. not cheap! - chris on Nov 26, 2008, 2:18 PM

Where can I find an AJAX engine stand???? - Kerry Johnson on Nov 27, 2008, 10:40 AM

O/T: 2-stroke technology trends View Thread - Jim Whitton on Nov 25, 2008, 6:21 PM

My blue haze time was behind a Lawn-Boy mower - bbr60 on Nov 25, 2008, 6:32 PM

Re: O/T: 2-stroke technology trends - Don Woodruff on Nov 25, 2008, 7:37 PM

honda CR mx bike... - Gerald Beatch on Nov 25, 2008, 9:37 PM

They have been saying that for 20 years. aint gonna happen. - Pippin on Nov 25, 2008, 10:09 PM

Smoking is getting snuffed out. - Darren on Nov 26, 2008, 5:36 AM

Come a long way - MeanGene on Nov 26, 2008, 9:25 AM

Blizzard Triple.. I remember those.... - DaleP on Nov 26, 2008, 12:19 PM

high tech is hitting 2 strokes too . . . - PetesPonies on Nov 26, 2008, 1:57 PM

Has been for some time!~ - Wes Adams Ford428CJ on Nov 26, 2008, 2:55 PM

I have 4 and will be working on a 5th & 6th Sled! - Wes Adams Ford428CJ on Nov 26, 2008, 2:24 PM

Bombardier, eh? - Tom P on Nov 26, 2008, 4:53 PM

750 Kaw... - steve meyer on Nov 26, 2008, 6:57 PM

Kamasloppy - MeanGene on Nov 26, 2008, 10:36 PM

That was the most underbuilt bike for the power - Bill Ballinger on Nov 27, 2008, 5:29 AM

I loved those - Ross on Nov 27, 2008, 7:49 AM

My wrecked H2 is still in my garage... - Dr. Mabuse on Nov 27, 2008, 8:27 AM

That bike "cured" me of motorcycle riding - Barry R on Nov 27, 2008, 12:28 PM

A friend of mine had one of those 750's - StarlinerRon on Nov 27, 2008, 3:31 PM

LOL Never forget when I was a Gas Pump Jockey this guy tossed me a can of oil and wanted - qikBBstang on Nov 27, 2008, 7:20 PM

FYI - Car Junkie TV.com View Thread - Jay Brown on Nov 25, 2008, 6:13 PM

Re: FYI - Car Junkie TV.com - Posford on Nov 26, 2008, 2:46 PM

General consensus of cutting header flanges... View Thread - Josh on Nov 25, 2008, 5:51 PM

Thickness is more important........... - Earl on Nov 25, 2008, 6:02 PM

I always try to make 'em individuals - Tom P on Nov 25, 2008, 7:15 PM

I made mine 3/8 & individual... - Andy on Nov 25, 2008, 7:44 PM

<< Prev

3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!