Manifolds

Yep, the 2x4LR would probably fit, but it's about the only intake I don't have right now LOL. I should lay them all out and take some comparison measurements, could measure from the ends where the manifold sets on the block, to the top of the carb flange. Got an extra 2x4 MR, P.O.S., Gal 3x2, Streetmasters & Street Dominators, PI, CJ, and a Sidewinder. Really wondering about an EFI kit fit to the P.O.S., seems like it's not as tall as the others, but might be an illusion. We did a toy drive show last Sunday, and my '66 was parked next to a (brighter yellow) '65- looked like maybe an inch higher hood at the front of the AC for the '65.
The factory engineering '65 427 'Bird that was around here was pretty legendary for lifting people's feet off the floorboard from a roll, and it was a stock 427-4V. You could hear the solids coming before you could see it. The old guy with the horn rims driving it finished off the package- looked like one of those guys in the control room in "Apollo 13". And it was bright red LOL