332-428 Ford FE Engine Forum (Page 22 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 28 Visitors BillBallinger120, qikbbstang, 26 guests

Not logged in | Login | Create Account

Post Now!

The new Cobra Jet..... View Thread - F570rd on Nov 3, 2008, 10:01 AM

Cool..... - Bob on Nov 3, 2008, 10:15 AM

LOL... - Dave Walters on Nov 3, 2008, 10:28 AM

Or change the blower pulley n/m Ks - KenS on Nov 3, 2008, 1:02 PM

425 H.P.? - Jim on Nov 3, 2008, 10:49 AM

I seen it - Tom P on Nov 3, 2008, 10:59 AM

Not far fetched at all when you consider a - DaleP on Nov 3, 2008, 11:26 AM

dont talk too soon !!! - john vermeersch on Nov 3, 2008, 11:37 AM

Re: The new Cobra Jet..... - r on Nov 3, 2008, 1:41 PM

some discussion about them, three years old, but - Pippin on Nov 3, 2008, 3:40 PM

Open mouth and insert foot: Time for a few drug tests at FoMoCo - qikBBstang on Nov 3, 2008, 6:13 PM

Normally - I love to toss bricks at Corporations... - Beoweolf on Nov 3, 2008, 6:58 PM

I believe Mr. Wolfe sited the 4 vehicles as "Race-Only", not street legal and some....... - Rod C on Nov 3, 2008, 7:01 PM

The four "factory race" - john vermeersch on Nov 4, 2008, 6:13 AM

Good grief BB. - Gary B on Nov 4, 2008, 10:49 AM

Nit-picking or not I believe there's post Fox Bodies that were not street legal - qikBBstang on Nov 4, 2008, 1:06 PM

64 galaixe wind shield View Thread - Anonymous on Nov 3, 2008, 9:12 AM

Glass - Terry on Nov 3, 2008, 10:40 AM

I don't know about a 64 but for the 62 I was getting quoted - Ray Hillebrand on Nov 3, 2008, 11:43 AM

Re: 64 galaixe wind shield - Richard Dinsen on Nov 3, 2008, 12:19 PM

That's reasonable... - BattlestarGalactic on Nov 3, 2008, 12:35 PM

Here's a chance to give a.... - KenS on Nov 3, 2008, 1:15 PM

Re:64 galaxie windshield - Richard on Nov 3, 2008, 8:00 PM

O/T Please recommend a good Windsor site View Thread - Dale Cecil on Nov 3, 2008, 8:47 AM

Ford Windsor Small Block Engine Forum - Tom C on Nov 3, 2008, 9:50 AM

Check out the "Mustangs and More" forum......... - Smokin Joe on Nov 3, 2008, 10:49 AM

Re: Check out the "Mustangs and More" forum......... - Dale Cecil on Nov 3, 2008, 9:09 PM

Also try - Tom in Vegas on Nov 4, 2008, 12:41 AM

390 crankshaft I.D. View Thread - Tim Vorick on Nov 3, 2008, 5:24 AM

Re: 390 crankshaft I.D. - Rich Ferguson on Nov 3, 2008, 5:46 AM

Crankshaft - Tim Vorick on Nov 3, 2008, 6:04 AM

1U = 428 - Bob Hasty on Nov 3, 2008, 8:44 AM

Crankshaft - Tim Vorick on Nov 3, 2008, 10:40 AM

Re: Crankshaft - Rich Ferguson on Nov 3, 2008, 12:14 PM

Get another Book ... that one is wrong. - Beoweolf on Nov 3, 2008, 8:52 AM

Actually there are five 428 cranks - Hawkrod on Nov 3, 2008, 9:07 AM

True... I didn't want to confuse the issue any further... - beoweolf on Nov 3, 2008, 9:50 AM

Hawkrod, actually there are at least six 428 cranks - Dennis on Nov 3, 2008, 3:42 PM

Thanks, I was refering to ID numbers, there are actually even more - Hawkrod on Nov 3, 2008, 4:43 PM

Re Steve Christ's book, on what page does it say 1U is a 390 crank? - Dennis on Nov 3, 2008, 3:15 PM

Anyone have hood clearance issue..... View Thread - ford-boy on Nov 3, 2008, 5:02 AM

Sure do - Lucas Massengale on Nov 3, 2008, 6:27 AM

Yes on my "64 - Richard Dinsen on Nov 3, 2008, 8:20 AM

Thanks. As long as I can use stock hood, I'm good. n/m - ford-boy on Nov 3, 2008, 8:29 AM

lucas Massengale - Bill D "The Pride of S Ga" on Nov 3, 2008, 3:36 PM

Can't say that I do - Lucas Massengale on Nov 4, 2008, 8:14 AM

2009 Calendar Photos needed View Thread - Bob Sprowl on Nov 3, 2008, 4:50 AM

Email sent,it might need retouching - Bill Ballinger on Nov 3, 2008, 6:46 AM

BTW, its my car here it is for everyone else - Bill Ballinger on Nov 4, 2008, 4:44 AM

Geeze Bill! - Mark Artis on Nov 4, 2008, 5:11 AM

email sent - Mark Artis on Nov 3, 2008, 7:30 PM

email sent - Jody Aberts on Nov 4, 2008, 4:19 AM

E-mail sent n/m - Jim W on Nov 4, 2008, 5:05 AM

66 F250 Road Trip View Thread - David J on Nov 3, 2008, 4:47 AM

Glad to hear that you had - Pete on Nov 3, 2008, 6:26 AM

i love it - Tim Mc on Nov 3, 2008, 6:35 AM

Truck improvements - David J on Nov 3, 2008, 7:14 AM

Great trucks .... - Mike Gaffney on Nov 3, 2008, 7:05 AM

Yup, nice old trucks - Alan Casida on Nov 3, 2008, 9:06 AM

What were you doing in MY state-Ha!? No alarms went off! j/k n/m - Tim Krenz on Nov 3, 2008, 9:45 AM

Your truck - 74ford on Nov 3, 2008, 10:06 AM

Truck pics - David J on Nov 3, 2008, 2:09 PM

That is freakn sweet! - Richard Dinsen on Nov 3, 2008, 5:43 PM

Dang................ - BattlestarGalactic on Nov 4, 2008, 8:00 AM

pix - derek on Nov 3, 2008, 7:55 PM

Hopefully in several months - David J on Nov 3, 2008, 7:58 PM

O/T FAIRLANE COBRA EMBLEMS View Thread - Joe on Nov 3, 2008, 3:34 AM

I think the decals were pre-production only - pmw on Nov 3, 2008, 4:51 AM

Re: I think the decals were pre-production only - Bill on Nov 3, 2008, 4:08 PM

Re: O/T FAIRLANE COBRA EMBLEMS - Rusty Gillis on Nov 4, 2008, 9:13 AM

Just flipped my FE calendar... View Thread - SteveR on Nov 2, 2008, 9:55 PM

SteveR I think they saved the best for the last two.think sexy - Bill Orrick on Nov 3, 2008, 4:45 PM

Hell yes! <nm> - SteveR on Nov 3, 2008, 9:20 PM

OT ....what is the fuel tank capacity for a 1963 Fairlane Sport Coupe ?? View Thread - e. philpott on Nov 2, 2008, 8:00 PM

16 gal. US - Dennis on Nov 2, 2008, 9:23 PM

thanks ...nm - e. philpott on Nov 3, 2008, 9:30 AM

Eric, a little thread drift........................................... - RonW on Nov 3, 2008, 4:10 PM

slowly , but surely - e. philpott on Nov 4, 2008, 2:55 PM

O/T Bought a Clydesdale View Thread - MeanGene on Nov 2, 2008, 7:09 PM

Wow Gene, I'm envious of you. That has always been one of my favorite.... - David F. on Nov 3, 2008, 6:19 AM

rhodes lifters View Thread - nick on Nov 2, 2008, 7:05 PM

lifters - fordsel on Nov 2, 2008, 7:20 PM

I've ran them - SteveR on Nov 2, 2008, 7:32 PM

re-rhodes - Joe D. Craine on Nov 2, 2008, 7:49 PM

HATE THEM - Royce on Nov 2, 2008, 10:28 PM

They work just fine, but...... - Cal on Nov 3, 2008, 4:12 AM

Love'em...Have installed them in FE's, SBF (302 & 351) - Beoweolf on Nov 3, 2008, 6:50 AM

I had them - daryl on Nov 3, 2008, 7:12 AM

Might be carefull about running lash caps with Rhodes I new a guy that cursed then big - qikBBstang on Nov 3, 2008, 8:15 AM

User error? - Beoweolf on Nov 3, 2008, 8:35 AM

intake comparison chart.... View Thread - richard on Nov 2, 2008, 6:26 PM

Here you go, compliments of Jay - Craig Mitchell on Nov 2, 2008, 6:34 PM

.. thanks, but the links to the charts are dead... - richard on Nov 2, 2008, 8:13 PM

Intake Chart - Irv on Nov 3, 2008, 3:55 AM

Yeah Jay pulled them.... - Dave Walters on Nov 3, 2008, 6:16 AM

Sorry... - Jay Brown on Nov 3, 2008, 9:30 AM

Jay Is There a List Yet? - LanceH on Nov 3, 2008, 2:12 PM

no worries.... understand the problem - richard on Nov 4, 2008, 10:33 PM

O/T need help with Holley 850 dp secondary accelerator pump cam View Thread - rcodecj Nick on Nov 2, 2008, 5:47 PM

Maybe I found the problem - rcodecj Nick on Nov 2, 2008, 6:38 PM

I believe.... - David on Nov 2, 2008, 8:18 PM

Holley Tuning - Chuck J. on Nov 3, 2008, 8:24 AM

67 Galaxie 7 litre Convertible View Thread - Fred Ashmore on Nov 2, 2008, 5:13 PM

Your best bet - Charlie on Nov 2, 2008, 5:52 PM

The Marti Report is the only way to tell - Royce on Nov 2, 2008, 10:49 PM

Re: 67 Galaxie 7 litre Convertible - Domenico on Nov 3, 2008, 1:46 AM

It's not the car I recently sold to a guy in AZ is it? - Cliff Harmon on Nov 3, 2008, 3:05 AM

Only the steering wheel badge is different - Royce on Nov 3, 2008, 4:38 AM

Re: 67 Galaxie 7 litre Convertible - Richard Dinsen on Nov 3, 2008, 9:10 AM

Questions, and responses - Fred Ashmore on Nov 3, 2008, 10:25 AM

69 Mustang fastback Carpet, I know OT again Sorry :( View Thread - Ian on Nov 2, 2008, 4:43 PM

Link - John on Nov 2, 2008, 5:35 PM

Re: 69 Mustang fastback Carpet, I know OT again Sorry :( - r on Nov 2, 2008, 6:17 PM

looks great . . . - Pete's Ponies on Nov 4, 2008, 4:30 AM

Viper Blue - Ian on Nov 4, 2008, 8:12 AM

C5AE Galaxie headers............. View Thread - Charlie on Nov 2, 2008, 3:33 PM

Wow ...$2,200 to start? - turq-66 on Nov 2, 2008, 8:44 PM

Let's see, 12hp for $2200, I'd pass too. - Werbyford on Nov 2, 2008, 10:38 PM

Re: Let's see, 12hp for $2200, I'd pass too. - Domenico on Nov 3, 2008, 1:51 AM

High prices are GOOD!... - Dr. Mabuse on Nov 3, 2008, 4:29 AM

Headers that fit ...about $600. Headers that don't rust out - priceless! - Beoweolf on Nov 3, 2008, 7:07 AM

Here's what they sound like too - Bill Ballinger on Nov 3, 2008, 10:18 AM

Cam hex drive question...for Enderle fuel pump View Thread - Brian Woodward on Nov 2, 2008, 1:00 PM

pump drive - Gene on Nov 2, 2008, 3:12 PM

Sorry, I wasn't clear in my post... - Brian Woodward on Nov 2, 2008, 3:35 PM

Been..... - Bob on Nov 2, 2008, 8:26 PM

Tool to remove valve springs with the heads on the engine? View Thread - Rick on Nov 2, 2008, 12:36 PM

look here - Harry H on Nov 2, 2008, 1:41 PM

I bought this one.... - Jim on Nov 2, 2008, 1:44 PM

X2... - Tommy-T on Nov 2, 2008, 2:59 PM

I bought that Ebay tool as well. Works Amazingly Well! n/m - Mike Burch on Nov 3, 2008, 5:28 AM

Don't forget... - Dave Walters on Nov 2, 2008, 3:41 PM

Or, a peice - john vermeersch on Nov 2, 2008, 4:30 PM

Clothesline - John on Nov 2, 2008, 4:51 PM

Re: Clothesline - Mike Lay on Nov 2, 2008, 5:43 PM

I just make sure the piston is at TDC - SteveR on Nov 2, 2008, 7:35 PM

Same guy with the main girdles - MeanGene on Nov 3, 2008, 6:30 AM

Emissions on 68 s code View Thread - Tom J. on Nov 2, 2008, 8:57 AM

14 bolt non smog C8AE-H heads were used on a lot of cars - Hawkrod on Nov 2, 2008, 9:12 AM

Thanks Hawk - Tom J. on Nov 2, 2008, 10:35 AM

He likely swapped out the heads to then - Bob Hasty on Nov 2, 2008, 10:41 AM

Interesting info. - Dave Shoe on Nov 2, 2008, 2:18 PM

Dave, there was no filing for a Domestic 390 GT without thermactor - Hawkrod on Nov 2, 2008, 3:42 PM

Thanks Hawk. - Dave Shoe on Nov 2, 2008, 5:45 PM

Re: Emissions on 68 s code - Scode67FB on Nov 2, 2008, 3:08 PM

Yes - Tom J. on Nov 2, 2008, 5:15 PM

Ultra Rare 1967 Mustang with 428CJ one of 41 produced? LOL View Thread - Royce on Nov 2, 2008, 7:16 AM

Re: Ultra Rare 1967 Mustang with 428CJ one of 41 produced? LOL - Rory McNeil on Nov 2, 2008, 7:34 AM

RePop Tiawan Chromed Export Brace tells all and the Econo Trunk Patch Job is Not-zac-er-ly - qikBBstang on Nov 2, 2008, 3:29 PM

Re: Ultra Rare 1967 Mustang with 428CJ one of 41 produced? LOL - Dave Walters on Nov 2, 2008, 8:11 AM

Re: Ultra Rare 1967 Mustang with 428CJ one of 41 produced? LOL - Dennis on Nov 2, 2008, 9:33 PM

Thanks Dennis... - Dave Walters on Nov 3, 2008, 10:24 AM

There were "dealer" installed options all over the place, back then. - Beoweolf on Nov 2, 2008, 8:55 AM

"Very straight unrestored 4 speed car, with 428 CJ special engine package, very rare!" - Gary B on Nov 2, 2008, 12:14 PM

Here is his reply to my inquiry - Kerry on Nov 2, 2008, 4:57 PM

The UAW strike was Sept 14th, 1967 at which point the 68 MY production would've started.. - Rod C on Nov 2, 2008, 5:12 PM

Re: Here is his reply to my inquiry - r on Nov 2, 2008, 6:26 PM

Here is his post before he became an authority - Kerry on Nov 2, 2008, 6:46 PM

Yup, that is a laugh... - DaleP on Nov 2, 2008, 8:57 PM

Re: Yup, that is a laugh... - George Vega on Nov 3, 2008, 7:07 AM

Re: Yup, that is a laugh... - Kerry on Nov 3, 2008, 7:20 AM

Sure mine is "Special" - DaleP on Nov 3, 2008, 11:35 AM

Re: Yup, that is a laugh... - r on Nov 3, 2008, 9:08 AM

O/T steering box removal on a stock 69CJ Mustang w/ps View Thread - TonyS. on Nov 2, 2008, 5:56 AM

Follow the directions in the shop manual - Royce on Nov 2, 2008, 7:04 AM

Ive done it - Harry H on Nov 2, 2008, 1:46 PM

cammer kits View Thread - Anonymous on Nov 2, 2008, 12:03 AM

So far, I'd give mine a "C" - Jay Brown on Nov 2, 2008, 5:13 AM

I would have to give my kit an F - Devin on Nov 3, 2008, 11:30 AM

I almost went for the $11,000 kit................................. - chrish on Nov 3, 2008, 3:52 PM

C and F,That's terrible news. You'd imagine if you had decades old reputation of leaking - qikBBstang on Nov 3, 2008, 6:28 PM

Re: I almost went for the $11,000 kit................................. - Devin on Nov 3, 2008, 9:35 PM

Another statisfied customer. - Bart on Nov 3, 2008, 7:44 PM

no card. I learn the hard way. - Devin on Nov 3, 2008, 8:20 PM

Well from some I have talked too !! - Russ on Nov 4, 2008, 8:55 AM

OT..Programing a remote key.... View Thread - Tbolt on Nov 1, 2008, 7:21 PM

Are you talking about.... - David on Nov 1, 2008, 10:33 PM

Re: Are you talking about.... - Tbolt on Nov 1, 2008, 11:03 PM

Re: OT..Programing a remote key.... - Dennis on Nov 1, 2008, 11:29 PM

Mustang question View Thread - Tim on Nov 1, 2008, 6:20 PM

Re: Mustang question - Mike Lay on Nov 1, 2008, 7:06 PM

kk - Tim on Nov 1, 2008, 10:23 PM

IMO, put it on, not a Mustang guy, but I rarely saw one without the spoiler...n/m - Rod C on Nov 2, 2008, 1:39 AM

Yeah, spoilers and slats were not available on 69 Mach I's but a lot of them got them - Hawkrod on Nov 2, 2008, 6:44 AM

I agree with Mike. - Rory McNeil on Nov 2, 2008, 6:56 AM

Rear Spoiler on '69 Mach - Jim Craig on Nov 2, 2008, 7:40 PM

Thanks for the advice guys - Tim on Nov 3, 2008, 5:17 PM

The car no one thought was made.... View Thread - Dave Walters on Nov 1, 2008, 4:08 PM

Re: The car no one thought was made.... - Anonymous on Nov 1, 2008, 4:20 PM

Lets not start that discussion again lol - Dave Walters on Nov 1, 2008, 4:26 PM

the car nobody thought was made - bill d "The Pride of S Ga" on Nov 3, 2008, 2:58 AM

no engine! original chassis rusted out! - Richard Dinsen on Nov 1, 2008, 4:45 PM

A clone???? - Dave Walters on Nov 1, 2008, 4:59 PM

Re: A clone???? - Richard Dinsen on Nov 1, 2008, 7:08 PM

I'm a little confused... - Dave Walters on Nov 2, 2008, 7:28 AM

Hmmmmm - Royce on Nov 1, 2008, 5:00 PM

Re: Hmmmmm - Rory McNeil on Nov 1, 2008, 5:06 PM

Ed Zackery - Royce on Nov 1, 2008, 5:08 PM

Re: Hmmmmm - Dave Walters on Nov 1, 2008, 5:17 PM

Wouldn't the correct 4spd have a small input?...n/m - Dr. Mabuse on Nov 1, 2008, 5:37 PM

Correct transmission - 1960 Town Vic on Nov 2, 2008, 5:28 AM

Another 64 Squire in the background? - Jim Whitton on Nov 1, 2008, 5:33 PM

Re: The car no one thought was made.... - r on Nov 1, 2008, 5:38 PM

Hopefully they took lots of photos of the car BEFORE restoration - Dennis on Nov 1, 2008, 5:58 PM

We know at least several factory 1968 427 Mustangs were manufactured. - Dave Shoe on Nov 1, 2008, 6:21 PM

The records for the 68 427 Mustangs do exist. Each serial number is listed - Hawkrod on Nov 1, 2008, 6:48 PM

Re: The records for the 68 427 Mustangs do exist. Each serial number is listed - Dennis on Nov 1, 2008, 7:50 PM

I, and a few selected individuals (including some here on the forum) do have copies - Hawkrod on Nov 2, 2008, 7:32 AM

It's simply hearsay ... - Dennis on Nov 2, 2008, 8:36 AM

I guess your right, I had hoped.... - Hawkrod on Nov 2, 2008, 8:54 AM

I think Tom is talking about the '67 Mustang 427 mule cars - Royce on Nov 2, 2008, 11:08 AM

Yes, that is what I was refering to. - Hawkrod on Nov 2, 2008, 3:43 PM

As was the original discussions, I am talking about a production built 1968 427 Mustang - Dennis on Nov 1, 2008, 7:15 PM

Wouldn't you presume one of the "Performance Dealers" like Tasca - qikBBstang on Nov 2, 2008, 2:17 AM

The cars I speak of... - Dave Shoe on Nov 2, 2008, 2:34 PM

Also, the "W-code" notation is a major part of the Mustang issue. - Dave Shoe on Nov 2, 2008, 6:33 PM

The cars you mention are outright frauds - Royce on Nov 2, 2008, 10:39 PM

The guys do tend to place excess value on VIN records - Barry R on Nov 1, 2008, 8:14 PM

Re 427 wagon with Equalock - Dave B. on Nov 1, 2008, 8:21 PM

My '64 Custom R.... - KenS on Nov 1, 2008, 9:54 PM

Barry I place a lot of value in all records, not just VIN - Royce on Nov 2, 2008, 7:28 AM

It must be a miracle, OMG, it has 3" drums and 6-leaf springs, LOL. The frame has......... - Rod C on Nov 2, 2008, 1:37 AM

Frame rust - Barry R on Nov 2, 2008, 4:11 AM

Ditto... - Dr. Mabuse on Nov 2, 2008, 5:29 AM

Barry my 66 had rust on the passenger side lower frame rails (Little Olde Lady - qikBBstang on Nov 2, 2008, 3:36 PM

Strange... - BattlestarGalactic on Nov 2, 2008, 4:55 AM

vin numbers and odd cars - Steve on Nov 2, 2008, 5:26 AM

Cars rot in strange ways. - SteveR on Nov 2, 2008, 3:58 PM

I suppose anyone can stamp a vin - 1960 Town Vic on Nov 2, 2008, 5:30 AM

Re: I suppose anyone can stamp a vin - Rory McNeil on Nov 2, 2008, 7:12 AM

There is another one... - Dave Walters on Nov 2, 2008, 7:09 AM

Maybe it is, maybe not.... - johnvermeersch on Nov 2, 2008, 12:01 PM

Maybe these 427 Galaxie wagons were hanging out with the 427 mustangs!! - Dave Walters on Nov 2, 2008, 1:00 PM

Dave, EVERY Galaxie - johnvermeersch on Nov 2, 2008, 1:31 PM

John I have to disagree... - Dave Walters on Nov 2, 2008, 3:25 PM

I have yet to see one without a VIN myself - Hawkrod on Nov 2, 2008, 3:45 PM

Could this be another Ford oddity??? - Dave Walters on Nov 2, 2008, 3:58 PM

Dave, youre corect. - john vermeersch on Nov 2, 2008, 3:48 PM

LOL ...good point John - Dave Walters on Nov 2, 2008, 4:04 PM

Re: John I have to disagree... - Dennis on Nov 2, 2008, 3:57 PM

Thanks for the input Dennis... - Dave Walters on Nov 2, 2008, 4:10 PM

I'll be sure to look at my LWG's frame when we remove the body. My son....... - Rod C on Nov 2, 2008, 5:21 PM

frame rust - Joe D. Craine on Nov 2, 2008, 7:55 PM

However, there is a difference in the Station Wagon frame. - Dennis on Nov 2, 2008, 4:24 PM

Dennis, is it lighter - john vermeersch on Nov 2, 2008, 4:58 PM

Re: Dennis, is it lighter - Dennis on Nov 2, 2008, 10:13 PM

There were a couple of 63 and 64 Mercury 427 wagons also... BJ had one - Pippin on Nov 2, 2008, 9:22 PM

Rusted frame - Joe D. Craine on Nov 2, 2008, 12:34 PM

Joe you can tell you have not launched many boats in Salt Water - qikBBstang on Nov 2, 2008, 3:50 PM

I think... - BattlestarGalactic on Nov 2, 2008, 6:18 PM

re-launched - Joe D. Craine on Nov 2, 2008, 6:28 PM

My rusted frame experience on the '65 Galaxie - Bill Ballinger on Nov 3, 2008, 6:35 AM

Your experince is typical for 65-66 Galaixies... - Beoweolf on Nov 3, 2008, 8:02 AM

It's good to finally know..... - Bob on Nov 3, 2008, 9:49 AM

You would never have imagined it, the frame is really light - Bill Ballinger on Nov 3, 2008, 10:59 AM

Unibody - Jake R on Nov 3, 2008, 3:17 PM

67 cougar 9 inch rebuild View Thread - Brian Malota on Nov 1, 2008, 3:14 PM

What wheel/tire size? - Jim Whitton on Nov 1, 2008, 3:33 PM

I am currently restoring the car - Brian Malota on Nov 1, 2008, 3:48 PM

2 pinion Equa Lock - Royce on Nov 1, 2008, 5:03 PM

67 Cougar - paul metzgar on Nov 1, 2008, 7:37 PM

3.5 and a Detroit Locker - Tim Krause on Nov 2, 2008, 6:30 AM

Thank you for your imput - Brian Malota on Nov 2, 2008, 7:30 AM

Summit sells them for - Tom J. on Nov 2, 2008, 9:08 AM

OT , but 351-C questions View Thread - e. philpott on Nov 1, 2008, 3:05 PM

Re: OT , but 351-C questions - Anonymous on Nov 1, 2008, 3:11 PM

Options - Joe D. Craine on Nov 1, 2008, 3:36 PM

Re: Options - e. philpott on Nov 1, 2008, 4:29 PM

Re: OT , but 351-C questions - Anonymous on Nov 1, 2008, 4:22 PM

Re: OT , but 351-C questions - e. philpott on Nov 1, 2008, 4:30 PM

351 heads - kc on Nov 1, 2008, 7:03 PM

go to this site..... - ford429cjlover on Nov 2, 2008, 4:14 PM

thanks - e. philpott on Nov 3, 2008, 9:33 AM

Clevor.... - ford429cjlover on Nov 4, 2008, 4:54 AM

Connecting rod side clearances View Thread - Cyclone Joe on Nov 1, 2008, 2:51 PM

Specs.. - BattlestarGalactic on Nov 1, 2008, 3:17 PM

Okay, let me see if I understand it then... - CycloneJoe on Nov 1, 2008, 6:17 PM

Individual clearances - Ross on Nov 1, 2008, 9:05 PM

Rods will float. - BattlestarGalactic on Nov 2, 2008, 4:58 AM

Rod Clearance - RWJ on Nov 2, 2008, 6:16 AM

I suppose... - BattlestarGalactic on Nov 2, 2008, 6:16 PM

Re: Okay, let me see if I understand it then... - Rory McNeil on Nov 2, 2008, 7:19 AM

Makes sense now - Cyclone Joe on Nov 2, 2008, 8:25 AM

Get a shop manual... - Dr. Mabuse on Nov 2, 2008, 7:05 PM

Short day on dyno - low oil pressure View Thread - Darmon on Nov 1, 2008, 2:25 PM

Pump details? n/m KS - KenS on Nov 1, 2008, 2:34 PM

Are the rocker shafts new ?? - winr1 on Nov 1, 2008, 2:35 PM

dyno - Darmon on Nov 1, 2008, 3:03 PM

Re: Short day on dyno - low oil pressure - donwight on Nov 1, 2008, 3:17 PM

Is that 38-42 ... - Mike Gaffney on Nov 1, 2008, 3:25 PM

dyno - Darmon on Nov 1, 2008, 3:41 PM

Check the pressure relief valve - Rick Lake on Nov 2, 2008, 5:05 AM

Pull the oil filter - Barry R on Nov 1, 2008, 3:52 PM

Re: Short day on dyno - low oil pressure - paul metzgar on Nov 1, 2008, 7:51 PM

Air check - Bart on Nov 1, 2008, 10:04 PM

Could you post your clearances? - Jim on Nov 2, 2008, 1:50 PM

5 speed advise View Thread - mike keesee on Nov 1, 2008, 2:07 PM

Look up Modern Driveline - Rob on Nov 1, 2008, 3:18 PM

Check out .... - Mike Gaffney on Nov 1, 2008, 3:50 PM

I'm doing this now - Bill Howard on Nov 2, 2008, 6:31 AM

5 speed galaxie - mike keesee on Nov 2, 2008, 3:30 PM

69' C-6 intermediate band replacement View Thread - Steve Corbin on Nov 1, 2008, 1:14 PM

Band replacement - RJP on Nov 1, 2008, 3:11 PM

instructions? - Steve Corbin on Nov 2, 2008, 8:26 AM

No instructions given - RJP on Nov 2, 2008, 12:18 PM

here is what i did. - David Ventura on Nov 2, 2008, 9:16 AM

Pops Performance View Thread - Anonymous on Nov 1, 2008, 11:36 AM

from kentucky? - Bob Hasty on Nov 1, 2008, 11:56 AM

Was discussed here several months ago - bbr60 on Nov 1, 2008, 11:57 AM

Re: Was discussed here several months ago - Anonymous on Nov 1, 2008, 2:35 PM

Re: Pops Performance - George Vega on Nov 1, 2008, 2:33 PM

I to agree - power by ford on Nov 1, 2008, 4:35 PM

1975 f250 camper special xlt with 428 cj aluminum valve covers? View Thread - Mike Howard on Nov 1, 2008, 9:10 AM

428 cj valve covers - j.frank on Nov 1, 2008, 10:04 AM

No, OEM were painted steel...n/m - Dr. Mabuse on Nov 1, 2008, 10:13 AM

ARP are they still missing the boat on Head Bolts View Thread - qikBBstang on Nov 1, 2008, 8:19 AM

and why 9/16"? - Richard Dinsen on Nov 1, 2008, 8:55 AM

dont even think about getting a kit for a tunnelport intake... - Mike U. on Nov 1, 2008, 2:46 PM

Mike what did you end up using?...... - Glenn on Nov 1, 2008, 3:04 PM

ARP bolts - Rick Lake on Nov 2, 2008, 4:58 AM

I'm sorry, but - Barry Gaugler on Nov 1, 2008, 5:56 PM

ID Help Intake View Thread - mike on Nov 1, 2008, 7:30 AM

Re: ID Help Intake - Robert Gile on Nov 1, 2008, 9:45 AM

Re: ID Help Intake - mike on Nov 1, 2008, 2:26 PM

Continuation of our discussion regarding phosphorous content of 427 blocks View Thread - Royce on Nov 1, 2008, 7:24 AM

The P block I has a distinct grain structure. I showed my block to a Mopar guy and he - qikBBstang on Nov 1, 2008, 8:02 AM

Royce, thank you for replying - Dennis on Nov 1, 2008, 8:36 AM

The OHO newsletter, - john vermeersch on Nov 1, 2008, 10:43 AM

JV re OHO newsletter - Dennis on Nov 1, 2008, 5:01 PM

I think John V wrote the 1968 - 70 books - Royce on Nov 1, 2008, 5:08 PM

Dennis that may be the same guy I talked with - Royce on Nov 1, 2008, 1:49 PM

Royce, as I've noted here on occasion.... - KenS on Nov 1, 2008, 2:46 PM

Re: Royce, as I've noted here on occasion.... - Dennis on Nov 1, 2008, 5:20 PM

Hawkrod it doesn't appear i was wrong after all......... - chrish on Nov 2, 2008, 3:18 AM

Standard run CO's had the same metalurgy as any other block - Hawkrod on Nov 2, 2008, 7:25 AM

The heat treat spec is on the respective -6010- cyl block assy engineering drawing - Dennis on Nov 2, 2008, 9:04 AM

Hawkrod it doesn't appear i was wrong after all......... - chrish on Nov 2, 2008, 3:55 AM

Dennis, if it were to have been.... - KenS on Nov 2, 2008, 10:59 AM

Dennis/ Ken S ...It was written - john vermeersch on Nov 2, 2008, 5:15 PM

390 Police Interceptor? View Thread - Matt Roth on Nov 1, 2008, 6:04 AM

Sounds like a '67 pickup 352 - Royce on Nov 1, 2008, 6:15 AM

I would think 390 - Bob Hasty on Nov 1, 2008, 6:39 AM

Oops you are right. - Royce on Nov 1, 2008, 6:45 AM

yep rare bird - Bob Hasty on Nov 1, 2008, 7:53 AM

I have a.... - KenS on Nov 1, 2008, 3:12 PM

adjustable rockers are a clue... - Dr. Mabuse on Nov 1, 2008, 8:29 AM

The reason I asked - Matt Roth on Nov 1, 2008, 9:55 AM

I guess they are not reliable... - Dr. Mabuse on Nov 1, 2008, 10:25 AM

O/T Glad to be back.... View Thread - David on Nov 1, 2008, 5:03 AM

Welcome back .... - Mike Gaffney on Nov 1, 2008, 6:55 AM

Re: Welcome back .... - gary o on Nov 1, 2008, 12:00 PM

Welcome back David!!......glad you have the car!! - winr1 on Nov 1, 2008, 7:07 PM

Thanks... - David on Nov 1, 2008, 10:38 PM

Seeking input!!! View Thread - KenS on Oct 31, 2008, 10:06 PM

Whatcha workin on Ken? - Brent on Nov 1, 2008, 4:52 AM

See..... - Bob on Nov 1, 2008, 7:21 AM

More.....but an Olds site. - Bob on Nov 1, 2008, 10:01 AM

The engine is.... - KenS on Nov 1, 2008, 9:43 PM

O/T what do you know about dash caps I may by one for 66 LTD View Thread - Bill Orrick on Oct 31, 2008, 8:04 PM

They can be made to look realistic with the correct Vinyl Dye/paint - qikBBstang on Oct 31, 2008, 9:09 PM

they take some work - Jason Engle on Nov 1, 2008, 3:17 AM

I used one on my 70 Torino - Warren 390 on Nov 1, 2008, 6:08 AM

Don't mean to steal thread but do Econo 65 & 66 Galaxie's use the same dash pod portion? - qikBBstang on Nov 1, 2008, 8:08 AM

Only a guess, but I'm thinking the padded dash was optional until '68. - David F. on Nov 1, 2008, 9:51 AM

Padded Dash Was Optional in 65 No Matter What Trim Level - Wreckless Warren on Nov 1, 2008, 1:43 PM

Re: O/T what do you know about dash caps I may by one for 66 LTD - Bruce on Nov 1, 2008, 6:14 AM

thanks to all of you - Bill Orrick on Nov 1, 2008, 6:42 PM

Rear main seal.... View Thread - W.KLINE on Oct 31, 2008, 7:34 PM

Napa - john on Nov 1, 2008, 8:08 PM

O/T My friend gets the "Cover Shot" View Thread - qikBBstang on Oct 31, 2008, 5:22 PM

please help! have a couple questions!! View Thread - robert watkins on Oct 31, 2008, 5:18 PM

link - Bob Hasty on Oct 31, 2008, 5:29 PM

EEK, i would not drop 7K with "spendyboy". call - Pippin on Oct 31, 2008, 11:16 PM

Welcome - Howie on Oct 31, 2008, 5:52 PM

Looks cool but head bolts look odd - Ross on Oct 31, 2008, 6:05 PM

Re: Looks cool but head bolts look odd - gary o on Nov 1, 2008, 12:19 PM

Re: please help! have a couple questions!! - Roger Gardner on Nov 2, 2008, 5:58 PM

E-Town View Thread - phil on Oct 31, 2008, 4:26 PM

I'll be there Sunday. n/m - Joe Stasiak on Oct 31, 2008, 8:40 PM

Aluminum rod ??? cont. View Thread - Gary on Oct 31, 2008, 10:14 AM

Man, I thought I had heard.... - Bob on Oct 31, 2008, 11:52 AM

In a garage? Hell, mine sat outside for four winters (Michigan). Maybe Venolia..... - Rod C on Oct 31, 2008, 12:09 PM

Rod. you may be right. just look at this - Bill Orrick on Oct 31, 2008, 3:03 PM

just bought a case (literally) of used BME Al rods...looked at them as 2+lb Al ingots... - JMO on Oct 31, 2008, 4:30 PM

Re: Aluminum rod ??? cont. - Jay Zolko on Nov 1, 2008, 9:26 AM

JET HOT View Thread - 427Howard on Oct 31, 2008, 8:36 AM

Re: JET HOT - Greg on Oct 31, 2008, 8:49 AM

Re: JET HOT - 427Howard on Oct 31, 2008, 8:57 AM

Have..... - Bob on Oct 31, 2008, 9:24 AM

Jet-Hot Sucks! - Charlie on Oct 31, 2008, 10:48 AM

Re: JET HOT - Greg on Oct 31, 2008, 10:51 AM

my headers came out good - Charles Logsdon on Oct 31, 2008, 11:20 AM

Except for a flange they broke off - Charlie on Oct 31, 2008, 12:09 PM

Nitro-plate - Richard Cerame on Oct 31, 2008, 12:04 PM

JET HOT - Mike Senar on Oct 31, 2008, 1:42 PM

They did nice work for me but - Ross on Oct 31, 2008, 5:39 PM

JETHOT - 427Howard on Oct 31, 2008, 6:05 PM

Re: JETHOT - Leo Allen on Oct 31, 2008, 6:35 PM

coatings - moose on Oct 31, 2008, 7:07 PM

Re: coatings - 427Howard on Oct 31, 2008, 7:35 PM

Re: JET HOT - John on Oct 31, 2008, 8:27 PM

no Victor Rienz...what to use? View Thread - Tom V on Oct 31, 2008, 8:34 AM

Re: no Victor Rienz...what to use? - 427Howard on Oct 31, 2008, 9:02 AM

I like MrGasket better than Fel Pro - Royce on Oct 31, 2008, 2:03 PM

MRG blocked crossover? - Tom V on Oct 31, 2008, 7:36 PM

factory aluminum intake View Thread - Anonymous on Oct 31, 2008, 8:25 AM

Re: factory aluminum intake - W Bartels on Oct 31, 2008, 9:09 AM

Re: factory aluminum intake - 427Howard on Oct 31, 2008, 9:31 AM

Factory washers... sort of - Pippin on Oct 31, 2008, 9:33 AM

Does having an original California Black Plate add to the value of the restoration? View Thread - Cliff Harmon on Oct 31, 2008, 8:14 AM

Re: Does having an original California Black Plate add to the value of the restoration? - Jim on Oct 31, 2008, 8:21 AM

Registration - Terry on Oct 31, 2008, 9:06 AM

Not sure... but I know on my California Special people gripe - Pippin on Oct 31, 2008, 9:46 AM

I think it does, because it show originality and nostalgia - Brian on Oct 31, 2008, 10:29 AM

I would say yes. Those are one of the Coolest color combinations on plates. - Beoweolf on Oct 31, 2008, 11:23 AM

Cliff I still have the - Earl E on Oct 31, 2008, 11:21 AM

BE Careful - MeanGene on Oct 31, 2008, 11:41 AM

Gene, are you talking about - Earl E on Oct 31, 2008, 11:56 AM

If they are out of the computer YOU HAVE TO FILE SPECIAL - Pippin on Oct 31, 2008, 3:03 PM

Pippin Are You sure about this? I ask because.... - Cliff Harmon on Nov 1, 2008, 4:22 PM

Plates won't match DSO, but I had three sets with only one plate remaining. Also........ - Rod C on Oct 31, 2008, 12:12 PM

I bought 2 67 Fairlanes - Earl E on Oct 31, 2008, 12:22 PM

That's only 1,443 cars in between, which wouldn't be much in overall......... - Rod C on Nov 1, 2008, 6:58 AM

Looking for Plates as Well - Robert Gile on Oct 31, 2008, 12:52 PM

THE DMV does not allow switching plates to other cars anymore... - Pippin on Oct 31, 2008, 3:04 PM

Re: THE DMV does not allow switching plates to other cars anymore... - Ray Hillebrand on Oct 31, 2008, 3:11 PM

Here ya go Ray - Earl E on Oct 31, 2008, 4:56 PM

Lookin good Earl - Ray Hillebrand on Oct 31, 2008, 8:32 PM

I like the 1776 plate - Earl E on Oct 31, 2008, 10:10 PM

like 1776 plate - jack b fuche on Dec 2, 2008, 6:17 PM

One thing I forgot to mention.... - Cliff Harmon on Nov 1, 2008, 4:24 PM

Re: Does having an original California Black Plate add to the value of the restoration? - Jeff Tepper on Oct 31, 2008, 3:06 PM

Did that law pass? They were talking about 'vanity' charges for all black - Pippin on Oct 31, 2008, 3:09 PM

From the CA. DMV Website - SnakeOnWheels on Oct 31, 2008, 3:43 PM

62 & 66 tbirds - Rich Bailey on Oct 31, 2008, 6:55 PM

Just an FYI, a 62 did not come with black plates - Hawkrod on Oct 31, 2008, 8:37 PM

Re:Does having an original California Black Plate add... - Richard on Nov 1, 2008, 5:46 PM

Nothing new there - Ain't that always the way? - Beoweolf on Nov 3, 2008, 8:23 AM

<< Prev

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!