332-428 Ford FE Engine Forum (Page 20 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 24 Visitors 68FBMustang, 23 guests

Not logged in | Login | Create Account

Post Now!

Any One using a Barry Grant Carb? View Thread - Matt on Nov 7, 2008, 6:58 PM

I am - John on Nov 7, 2008, 7:17 PM

They're OK - Chuck J. on Nov 7, 2008, 9:24 PM

Strong Opinions on Both Sides - Wreckless Warren on Nov 8, 2008, 3:42 AM

BG carb - fordsel on Nov 8, 2008, 4:30 AM

BG - Joe D. Craine on Nov 8, 2008, 6:02 AM

i using 1 of BG older units stage3 - chris on Nov 8, 2008, 6:39 AM

Mine runs fine, have one for sale... - Dan on Nov 8, 2008, 7:32 AM

Anyone in NW Ohio ? View Thread - Matt on Nov 7, 2008, 6:30 PM

Best of luck Matt....something will turn up :-) - winr1 on Nov 7, 2008, 6:39 PM

what do you do? - rick on Nov 7, 2008, 8:45 PM

Re: what do you do? - Matt on Nov 8, 2008, 10:48 AM

O/T eBay won't let me bid... View Thread - Dave Walters on Nov 7, 2008, 5:00 PM

Re: O/T eBay won't let me bid... - Matt on Nov 7, 2008, 5:32 PM

What are you using now? - Tim O'Connor on Nov 7, 2008, 6:44 PM

this may be an effort - Bob Hasty on Nov 7, 2008, 10:02 PM

Did I dream a while ago eBay had made it impossible for sellers to rate buyers - qikBBstang on Nov 8, 2008, 3:40 AM

It wasn't a dream BB... - Dave Walters on Nov 8, 2008, 11:53 AM

Doohhh. I somehow took it that sellers could not provide feedback on buyers - qikBBstang on Nov 10, 2008, 6:43 AM

screw-bay and pay for $h!$ - chris on Nov 8, 2008, 6:55 AM

OT, on a 1967-1970 Mustang 9 inch housing? View Thread - Pippin on Nov 7, 2008, 4:48 PM

Re: OT, on a 1967-1970 Mustang 9 inch housing? - Anonymous on Nov 7, 2008, 5:23 PM

That is correct... - Hawkrod on Nov 7, 2008, 5:45 PM

Looking for axles? - Mike Ratterree on Nov 7, 2008, 7:20 PM

yup , just sold a set - Bob Hasty on Nov 7, 2008, 7:40 PM

I found two local ones for $50 pr. but - Pippin on Nov 7, 2008, 8:57 PM

39 years of who knows - Mike Ratterree on Nov 8, 2008, 7:14 AM

Edelbrock mufflers View Thread - Tim Krause on Nov 7, 2008, 1:21 PM

If they are the new style - Mike Burch on Nov 7, 2008, 1:43 PM

Tim, I've had good luck with.... - KenS on Nov 7, 2008, 1:50 PM

Re: Edelbrock mufflers - r on Nov 7, 2008, 2:52 PM

I like my split-flows.... - doug smith on Nov 7, 2008, 6:00 PM

Those are the OLD style Edelbrocks - Mike Burch on Nov 7, 2008, 6:44 PM

is the Dynatech Split-Flow Race Mufflers the same or just - Pippin on Nov 7, 2008, 11:30 PM

Dynatech - Mike Burch on Nov 8, 2008, 4:59 AM

has anyone used that internal X muffler from dynomax? n/m - Pippin on Nov 8, 2008, 7:51 AM

TOTAL CRAP - Mike Burch on Nov 8, 2008, 9:18 AM

Doug, those sound nice.....here are sound sound files from Edelbrock - winr1 on Nov 7, 2008, 6:44 PM

Mufflers - griffith,chuck on Nov 8, 2008, 11:42 AM

FordFE.com decals ??? View Thread - Jody Aberts on Nov 7, 2008, 1:14 PM

I have a guy that does decals for me ... - Lance on Nov 7, 2008, 1:53 PM

i would buy some - Kyle on Nov 7, 2008, 2:24 PM

I had some made a few years ago and sold them here..... - Doug S on Nov 7, 2008, 2:35 PM

i'm the one that had the my ford is a hybrid stickers - matt on Nov 7, 2008, 2:37 PM

If no one steps up or minds - Bob Hasty on Nov 7, 2008, 4:42 PM

Go for it! - Doug S on Nov 8, 2008, 5:55 AM

Decals - Anonymous on Nov 8, 2008, 2:01 PM

Hi Matt, my Friends loved those stickers!!!...I will buy some of the Ford FE stickers also - winr1 on Nov 7, 2008, 6:50 PM

stickers - Donnie on Nov 7, 2008, 6:44 PM

Barry should do those - Bob Hasty on Nov 7, 2008, 7:43 PM

I NEED Decals! - Barry R on Nov 7, 2008, 8:55 PM

Put your avatar dude in there as well! - Barry Byer on Nov 7, 2008, 10:46 PM

Decals - David on Nov 8, 2008, 2:48 AM

O/T: finding your first car View Thread - matt kolden on Nov 7, 2008, 11:23 AM

Serial # - John on Nov 7, 2008, 1:31 PM

You could try state DMV's - Anonymous on Nov 7, 2008, 3:43 PM

Just looked out the window... - MeanGene on Nov 7, 2008, 5:45 PM

I'm proud to say - Bob Hasty on Nov 7, 2008, 7:48 PM

My first car is in the backyard too! - Hawkrod on Nov 7, 2008, 8:16 PM

State DMV - Bob on Nov 8, 2008, 3:39 AM

Valve seats for CJ heads View Thread - John on Nov 7, 2008, 11:15 AM

Recommend exhaust seats only - Royce on Nov 7, 2008, 1:17 PM

Valve Seats - Rob McQuarie on Nov 8, 2008, 1:50 PM

Thanks - John on Nov 9, 2008, 12:49 PM

Header experience View Thread - Bob Rose on Nov 7, 2008, 9:57 AM

Do they come apart in 5 pieces, 3 on the passenger, 2 on the driver?......n/m - Rod C on Nov 7, 2008, 10:36 AM

Re: Do they come apart in 5 pieces, 3 on the passenger, 2 on the driver?......n/m - Bob Rose on Nov 8, 2008, 3:49 AM

Hookers - Terry on Nov 8, 2008, 6:24 AM

No problems, you just need to cut the passenger's inner fender where......... - Rod C on Nov 8, 2008, 8:51 AM

Cutting - Terry on Nov 8, 2008, 10:29 AM

Mine cleared on the driver's side, I think, LOL......n/m - Rod C on Nov 8, 2008, 3:09 PM

THANX - Bob Rose on Nov 9, 2008, 4:43 AM

Not so fast, think about this, the cost of another inner panel vs $1K+ cast....... - Rod C on Nov 9, 2008, 8:33 AM

Hooker 6114 coating problem - recommendations? View Thread - Pippin on Nov 7, 2008, 9:42 AM

Recoating is the best by far - Ross on Nov 7, 2008, 10:06 AM

not with BAAQMD and our poor economy. - Pippin on Nov 7, 2008, 2:19 PM

I have heard good things about these guys in Fresno - Tim Rossol on Nov 7, 2008, 3:39 PM

O/T: RiverRacer, have you spoken to Mr. Fritz Voigt recently? Is he........ View Thread - Rod C on Nov 7, 2008, 9:34 AM

Rod, perhaps you need to contact Ace Parmenter? - Dennis on Nov 7, 2008, 9:59 AM

I was hoping "Ace" had cut up another hood. Earlier this year I had found....... - Rod C on Nov 7, 2008, 10:34 AM

Attn: Rod - I was hoping "Ace" had cut up another hood. - Dennis on Nov 7, 2008, 5:39 PM

I just answered your e-mail before coming here. I spoke to "Reed from Nebraska" quite..... - Rod C on Nov 7, 2008, 7:01 PM

Fritz. - RiverRacer on Nov 7, 2008, 3:19 PM

Very much appreciated Dennis, and I'll take the heat from the.... - Rod C on Nov 7, 2008, 3:38 PM

O/T: Faron, just checking on the status the distributors I sent you earlier this year..... View Thread - Rod C on Nov 7, 2008, 9:20 AM

406 rings View Thread - jeff on Nov 7, 2008, 4:22 AM

Re: 406 rings - Dave Walters on Nov 7, 2008, 5:50 AM

Fat 2nds - MeanGene on Nov 7, 2008, 5:58 AM

Re: 406 rings - Jody Aberts on Nov 7, 2008, 6:58 AM

Rings - Dennis Carrico on Nov 7, 2008, 8:05 AM

what is a pair of C2AE exhaust manifolds worth View Thread - vanscooter on Nov 7, 2008, 3:49 AM

I've seen them go for $500 - $800... - Dave Walters on Nov 7, 2008, 5:51 AM

Thats a good question, I saw a set,,,,,,, - garry on Nov 7, 2008, 9:57 AM

Scored mine at a pre-epay swap meet for $80! - SteveR on Nov 7, 2008, 2:40 PM

Scott Drake Aluminium Water Pump View Thread - Andre on Nov 7, 2008, 1:05 AM

I have one coming - Royce on Nov 7, 2008, 3:50 AM

China???? What is the reason you go with this one... - Andre on Nov 7, 2008, 4:43 AM

China quality is way better than Dove - Royce on Nov 7, 2008, 6:20 AM

Royce that is incredible, I bought my Dove pump back in 1991, installed it in '93 - TonyS. on Nov 7, 2008, 6:55 AM

I looked at the Dove pumps this year at Columbus swap meet - Royce on Nov 7, 2008, 7:20 AM

Re: "Drake's controlling quality of the products, he does not accept nor sell inferior" - qikBBstang on Nov 7, 2008, 2:33 PM

Are they competitively priced? - Barry Byer on Nov 7, 2008, 9:05 AM

The good, the bad and the ugly from China... - Dr. Mabuse on Nov 7, 2008, 3:09 PM

What the heck sense would it make for Drake to try and sell Dove or Edelbrock? - TonyS. on Nov 7, 2008, 5:39 AM

I have concluded.... - KenS on Nov 7, 2008, 10:07 AM

Dove hasn't always cast his own parts - Carnut427 on Nov 7, 2008, 11:45 AM

Dan, Jim Dove had bad trouble.... - KenS on Nov 7, 2008, 1:47 PM

I Agree - John on Nov 7, 2008, 2:46 PM

Royce what kinda price tag is on the Drake pump?..... - Glenn on Nov 7, 2008, 12:31 PM

Scott Drake pump is about $100 - Royce on Nov 7, 2008, 1:15 PM

Thanks Royce.... - Glenn on Nov 7, 2008, 1:37 PM

Hi Royce, all I could find on that site was an Ebrock FE pump ??? - winr1 on Nov 7, 2008, 6:54 PM

didn't see it in Vegas - Tom P on Nov 8, 2008, 12:07 AM

Here is a vendor... - Andre on Nov 8, 2008, 12:26 AM

Every part they sell is not listed on their web site - Royce on Nov 8, 2008, 6:36 AM

Thanks Royce!! - winr1 on Nov 8, 2008, 10:36 AM

New Pumps seem OK so far. Now stocking them. - Rob McQuarie on Nov 8, 2008, 12:53 PM

Robb's website should be in the "Links"...n/m - Dr. Mabuse on Nov 8, 2008, 4:21 PM

Same deal as Rob for those in the Southwest - Marty Burke on Nov 9, 2008, 6:43 AM

Cammer rocker up-date View Thread - Keith Craft on Nov 6, 2008, 8:35 PM

I look forward to learning what T&D has come up with. - Dave Shoe on Nov 6, 2008, 10:51 PM

rollers vs. bushing - Don on Nov 7, 2008, 3:04 AM

are these the stock rockers or aluminum n/m - Bill Orrick on Nov 7, 2008, 8:26 AM

SOHC Rockers - Keith Craft on Nov 8, 2008, 7:42 PM

o/t: Mustang rubber floor kit available (rather then carpet?) View Thread - Pippin on Nov 6, 2008, 8:06 PM

Re: o/t: Mustang rubber floor kit available (rather then carpet?) - Don on Nov 7, 2008, 3:08 AM

cowl vent - David Ventura on Nov 7, 2008, 7:38 AM

Never happened from the factory - Royce on Nov 7, 2008, 3:53 AM

He didn't ask about "factory" n/m - Jim Whitton on Nov 7, 2008, 9:51 AM

Re: He didn't ask about "factory" n/m - Anonymous on Nov 7, 2008, 10:32 AM

Mats - Lars on Nov 7, 2008, 3:49 PM

Thanks for the info. I remember seeing a company that had Fairlane Rubber Mats and - Pippin on Nov 8, 2008, 10:01 PM

O/T, time to quit this View Thread - john vermeersch on Nov 6, 2008, 7:17 PM

RE, O/T, time to quit this - Earl E on Nov 6, 2008, 7:28 PM

John, it's just a big golf cart! - Bob on Nov 6, 2008, 7:31 PM

Re: O/T, time to quit this - Doug on Nov 6, 2008, 8:26 PM

Very funny - steve meyer on Nov 7, 2008, 7:09 PM

Thats funny! - Ross on Nov 6, 2008, 10:01 PM

Drive an Escape Hybrid? - Tim O'Connor on Nov 7, 2008, 4:07 AM

That's a good one John.... - Dave Walters on Nov 7, 2008, 5:41 AM

I've ridden in a Prius.... - BattlestarGalactic on Nov 7, 2008, 5:41 AM

RX400H - Zilla_58 on Nov 7, 2008, 10:13 AM

Don't feel bad John - John on Nov 7, 2008, 11:10 AM

HAHAHA !!! - ezgoing on Nov 7, 2008, 11:43 AM

electrics - Tom P on Nov 8, 2008, 12:09 AM

Re: O/T, time to quit this - Bill Nuttle on Nov 7, 2008, 6:48 PM

You should have seen the fun we had with Prius... - SLT on Nov 7, 2008, 7:27 PM

O/T, time to quit this View Thread - john vermeersch on Nov 6, 2008, 7:17 PM

Wow thats interesting, - Tom in Vegas on Nov 6, 2008, 7:21 PM

Now that's rich!!! - Mike on Nov 6, 2008, 7:35 PM

Re: Now that's rich!!! - Carnut427 on Nov 7, 2008, 8:48 PM

Hey, Carnut, - john vermeersch on Nov 8, 2008, 12:11 PM

OT...A friend has timing mark problems on 351W.... View Thread - hollis franks on Nov 6, 2008, 7:03 PM

SBF's have 3 different timing pointer locations. - Brent on Nov 6, 2008, 7:26 PM

opinions wanted View Thread - Joe on Nov 6, 2008, 6:05 PM

More info needed - Joel on Nov 6, 2008, 7:00 PM

Set up - Joe on Nov 7, 2008, 7:01 AM

The cam is smallish - Joel on Nov 7, 2008, 8:57 AM

i'd go with 10:1 and the xe-274 - Kyle on Nov 7, 2008, 2:22 PM

motor runs rough then BOOM! comes alive around 3k rpms??? View Thread - derek on Nov 6, 2008, 6:04 PM

points not opening, poor ground, junk in idle circuit of carb, small - Pippin on Nov 6, 2008, 7:56 PM

I think vacuum leak also... - Dan on Nov 6, 2008, 9:59 PM

Maybe - Mike on Nov 6, 2008, 8:19 PM

7-9 psi sounds high - Kyle on Nov 6, 2008, 8:29 PM

good catch, 9 psi will flood an edelbrock, they - Pippin on Nov 6, 2008, 10:19 PM

maybe i don't know i always run holleys - Kyle on Nov 7, 2008, 8:20 AM

Re: motor runs rough then BOOM! comes alive around 3k rpms??? - derek on Nov 7, 2008, 10:11 AM

Like they said, too much fuel pressure!... - Dr. Mabuse on Nov 7, 2008, 4:03 PM

Re: Like they said, too much fuel pressure!... - derek on Nov 18, 2008, 9:06 PM

Engine for sale (editted) View Thread - Jay Zolko on Nov 6, 2008, 4:45 PM

Please put advertising in the classifieds - Hawkrod on Nov 6, 2008, 5:17 PM

Sorry! - Jay Zolko on Nov 9, 2008, 10:22 AM

pinto coversion View Thread - smoothie1 on Nov 6, 2008, 4:19 PM

Don't believe... - Bob on Nov 6, 2008, 5:38 PM

I believe the FE is too large without cutting out the firewall. - Gary B on Nov 6, 2008, 6:09 PM

no problem - kelly on Nov 6, 2008, 6:54 PM

I built a '72 Pinto.... - KenS on Nov 6, 2008, 8:30 PM

Firewall has to go back - Tim Maloney on Nov 7, 2008, 5:16 PM

thats the bitchinest picture Ive ever seen - kelly on Nov 7, 2008, 7:50 PM

Re: thats the bitchinest picture Ive ever seen - gary o on Nov 7, 2008, 10:10 PM

Rare R code Pinto?...installed by Ford on the assembly line?... - Dr. Mabuse on Nov 8, 2008, 11:11 AM

FE Pinto - Tom P on Nov 8, 2008, 2:58 PM

Have a 390 in mine... - Mike A on Nov 8, 2008, 5:06 PM

WAY O/T but thought it was funny View Thread - Kerry on Nov 6, 2008, 3:26 PM

OT: Uses for methanol w/ 20% nitromethane. View Thread - Gary on Nov 6, 2008, 2:32 PM

OT: Uses for methanol w/ 20% nitromethane. - Mike Gray on Nov 6, 2008, 3:30 PM

Shouldn't be too hard to find an R/C racer that would buy iy n/m - Josh on Nov 6, 2008, 5:09 PM

Poor it in a full 15 gal. tank ... - Mike Gaffney on Nov 6, 2008, 5:47 PM

I run it - SteveR on Nov 7, 2008, 2:42 PM

OT/Bolt in stainless "Tiger Cage"... View Thread - Dr. Mabuse on Nov 6, 2008, 1:55 PM

Nice idea... - Dave Walters on Nov 6, 2008, 3:45 PM

A little pricey - Alan Casida on Nov 6, 2008, 4:02 PM

pricey and silly - Tom P on Nov 8, 2008, 3:10 PM

Anybody using a Holley Truck Avenger 770 carb? View Thread - David J on Nov 6, 2008, 1:53 PM

Not great for street use - Timothy on Nov 6, 2008, 3:30 PM

??? sounds like a jetting problem to me. should work fine. n/m - Pippin on Nov 6, 2008, 7:57 PM

IMO, I'd remove the bowls and baseplate and check/verify that all machined........ - Rod C on Nov 7, 2008, 5:30 AM

i use a street avenger for offroad - Kyle on Nov 7, 2008, 8:24 AM

It's a Holley, so it'll work great! - Chuck J. on Nov 7, 2008, 9:21 AM

OT..351C vacumn question? View Thread - Tbolt on Nov 6, 2008, 10:34 AM

Re: OT..351C vacumn question? - Anonymous on Nov 6, 2008, 10:37 AM

Yup, What you are describing is how Ford designed it - Hawkrod on Nov 6, 2008, 11:50 AM

I would look at the - HOTROD on Nov 6, 2008, 12:28 PM

RE: I would look at the - Mike Gray on Nov 6, 2008, 1:03 PM

as stated below,you seem to have a carb problem - Bobby Spears on Nov 6, 2008, 9:28 PM

The vacuum tree as you cal it is - Bobby Spears on Nov 7, 2008, 8:39 AM

Thanks for the replys.... - Tbolt on Nov 8, 2008, 2:02 PM

OT: Uses for STP View Thread - Jack on Nov 6, 2008, 9:00 AM

http://www.stp.com - trz1000 on Nov 6, 2008, 9:15 AM

New bearing break-in - Gary on Nov 6, 2008, 9:29 AM

re STP - john tolliver on Nov 6, 2008, 10:32 AM

I think it's.... - Glenn on Nov 6, 2008, 10:49 AM

Nope! It's...... - Bob on Nov 6, 2008, 10:51 AM

LOL... - Glenn on Nov 6, 2008, 10:55 AM

re answer to STP!! - john tolliver on Nov 6, 2008, 11:58 AM

Andy - Terry on Nov 6, 2008, 12:27 PM

Yep - Richard Dinsen on Nov 6, 2008, 5:26 PM

Just for those wondering about the Studebaker connection - Hawkrod on Nov 6, 2008, 6:30 PM

Studebaker... - Dr. Mabuse on Nov 7, 2008, 4:15 PM

Studebaker Worthington lasted until mcGraw edison acquired them in 79 and so on - Hawkrod on Nov 7, 2008, 7:10 PM

When I was a kid, - Steve Roehrs on Nov 6, 2008, 1:55 PM

Re: re STP - Mike Lay on Nov 6, 2008, 1:59 PM

STP - john tolliver on Nov 7, 2008, 10:01 AM

STP - Kam on Nov 6, 2008, 4:57 PM

Great for engine assembly... - Dave Walters on Nov 6, 2008, 11:51 AM

STP, - Don Ragan on Nov 6, 2008, 12:36 PM

stp stickers - john on Nov 6, 2008, 9:23 PM

Funny you mention that .... - Beoweolf on Nov 7, 2008, 7:26 AM

STP Stickers---I remember.... - KenS on Nov 7, 2008, 11:18 AM

I've always used it in my FEs since 1968. After snapping his oil pump...... - Rod C on Nov 7, 2008, 5:48 AM

STP's marketing effort of long ago..... - Bob on Nov 7, 2008, 7:37 AM

STP + S/S - Falconred on Nov 7, 2008, 8:57 AM

U can still get those Ford stickers I think... - JC DeSaveur on Nov 7, 2008, 10:50 AM

Re: U can still get those Ford stickers I think... - John on Nov 7, 2008, 11:24 AM

What does STP stand for? - ''Goose'' on Nov 8, 2008, 3:39 PM

Correct abbreviation for "Stop Teenage Pregnancies"...n/m - Dr. Mabuse on Nov 8, 2008, 4:16 PM

not FE but ford....badger p749 piston specs View Thread - dablack on Nov 6, 2008, 7:58 AM

That is no longer a valid #........ RW - Inthegarge on Nov 6, 2008, 8:54 AM

Badger P749 Pistons - Dennis Carrico on Nov 6, 2008, 10:14 AM

wow thanks - dablack on Nov 6, 2008, 10:54 AM

one more thing - dablack on Nov 6, 2008, 11:18 AM

Re: one more thing - RiverRacer on Nov 6, 2008, 3:16 PM

390 Crankshaft question View Thread - Tim Vorick on Nov 6, 2008, 7:43 AM

i would say - Bob Hasty on Nov 6, 2008, 9:25 AM

Another O/T question - Has anyone used the Pro Motorsports Camber lock plates View Thread - TonyS. on Nov 6, 2008, 6:01 AM

Yes.... - Bob on Nov 6, 2008, 6:30 AM

n/m . - Bob on Nov 6, 2008, 6:30 AM

Tri power and Heads View Thread - Brian on Nov 6, 2008, 3:30 AM

Things to look for and measure - WerbyFord on Nov 6, 2008, 6:56 AM

I filled mine - Paul on Nov 6, 2008, 5:39 PM

Main studs.... View Thread - David on Nov 5, 2008, 11:20 PM

No line hone for me - Mario428 on Nov 6, 2008, 2:49 AM

Always check it.... - Dave Walters on Nov 6, 2008, 6:02 AM

main studs - Roger Gordon on Nov 6, 2008, 9:18 AM

That's not true - Howie on Nov 6, 2008, 10:11 AM

Wrong - Barry R on Nov 6, 2008, 10:56 AM

What if the cap is counterbored for nut/pan clearance?...n/m - Dr. Mabuse on Nov 6, 2008, 10:47 AM

Re: Main studs.... - Jay Zolko on Nov 6, 2008, 3:35 PM

O/T - Problem with Ebay/PayPal purchase View Thread - Randy on Nov 5, 2008, 8:56 PM

Don't wait - fakesnake.com on Nov 5, 2008, 9:17 PM

Re: O/T - Problem with Ebay/PayPal purchase - r on Nov 5, 2008, 10:45 PM

Resolution Center - R.C. Vick on Nov 6, 2008, 4:34 AM

past 45 days your screwwed!!!!!!!!!!!!!!!!!!!!!!! - chris on Nov 6, 2008, 5:25 AM

Dont wait doit now.... - Lance on Nov 6, 2008, 5:47 AM

Re: Dont wait doit now.... - John on Nov 6, 2008, 6:01 AM

Ebay/PayPal problems - SSdynosaur on Nov 6, 2008, 5:57 AM

Thanks for the advice - Randy on Nov 6, 2008, 6:35 AM

Re: O/T - Problem with Ebay/PayPal purchase - Robert Gile on Nov 6, 2008, 8:15 AM

100% feedback - R.C. Vick on Nov 6, 2008, 9:12 AM

You miss some good sellers if you are stuck on the 100% feedback issue - Hawkrod on Nov 6, 2008, 9:27 AM

Good point Hawkrod - Gary B on Nov 6, 2008, 3:27 PM

The sad truth is... - Hawkrod on Nov 6, 2008, 5:20 PM

Way OT but if you suffer migraines ............... View Thread - Earl on Nov 5, 2008, 6:56 PM

wtf ! - rick on Nov 5, 2008, 7:00 PM

Migraines may be caused by a sleep disorder. - 1960 Town Vic on Nov 5, 2008, 7:24 PM

Is it more expensive - Steve Roehrs on Nov 5, 2008, 7:44 PM

Well....... - Earl on Nov 5, 2008, 7:48 PM

Migraines - Ross on Nov 5, 2008, 7:45 PM

I suffer headaches for days on end, Imitrex makes me sick - Bill Ballinger on Nov 5, 2008, 8:04 PM

Try.... - Joe Burnett on Nov 5, 2008, 8:07 PM

Re: I suffer headaches for days on end, Imitrex makes me sick - Anonymous on Nov 5, 2008, 8:12 PM

Re: Way OT but if you suffer migraines ............... - r on Nov 5, 2008, 10:47 PM

botox - jon on Nov 6, 2008, 7:43 AM

Strange but true - mailmandon on Nov 6, 2008, 7:48 AM

Mine started after a rear-end collision and whiplash - Bill Ballinger on Nov 6, 2008, 3:10 PM

Re: Way OT but if you suffer migraines ............... - Robert Gile on Nov 6, 2008, 8:19 AM

migranes/headeach - jeff on Nov 6, 2008, 2:48 PM

Promising permanent cure reported in Discovery Magazine - howard on Nov 6, 2008, 10:07 AM

Late Model 5 Speed behind a 390??? View Thread - jaysf250 on Nov 5, 2008, 5:47 PM

Several issues... - JC DeSaveur on Nov 5, 2008, 8:24 PM

deleted. - Rod C on Nov 6, 2008, 4:46 AM

how about a Clark 280 series ? - Cal on Nov 6, 2008, 5:13 AM

Cal, where do you find them? - Ross on Nov 6, 2008, 6:54 AM

I had one.....it got junked. - Brent on Nov 6, 2008, 7:27 AM

5-speed - Richard on Nov 6, 2008, 9:30 AM

First we need some oil............. - Cal on Nov 6, 2008, 12:46 PM

I always liked them, International used them alot - Bill Ballinger on Nov 6, 2008, 3:44 PM

Another option - Alan Casida on Nov 6, 2008, 4:07 PM

Balancing View Thread - Richard Dinsen on Nov 5, 2008, 5:35 PM

Yea..if you're a machine shop... - Steve Corbin on Nov 5, 2008, 5:48 PM

Yes and no.................... - chrish on Nov 5, 2008, 6:06 PM

Mallory, and for goodness sake.... - KenS on Nov 5, 2008, 9:53 PM

Used to be very common - Barry R on Nov 6, 2008, 4:51 AM

Yep, I have a nice 390 crank with weld - Ross on Nov 6, 2008, 6:57 AM

Thanks... - Richard Dinsen on Nov 6, 2008, 7:28 AM

An update on the (noisy) exhaust issue View Thread - Doug on Nov 5, 2008, 5:19 PM

same here - Don on Nov 5, 2008, 5:39 PM

I didn't have the shock issue - Doug on Nov 5, 2008, 7:14 PM

You would be really - Howie on Nov 5, 2008, 8:31 PM

I have 3" Bassani muffs.... - KenS on Nov 5, 2008, 10:03 PM

I insulated the trunk tonight - improvement - Doug on Nov 5, 2008, 11:05 PM

you need dynomax Big Block turbo: 17769 or 17665, its rated for - Pippin on Nov 5, 2008, 11:53 PM

Have you tried using a rubber/fiber type washer between the fuel tank and trunk pan....... - Rod C on Nov 6, 2008, 5:55 AM

Magnaflows - Dave Walters on Nov 6, 2008, 5:55 AM

nice idea, but you cant compare a galaxie. - Pippin on Nov 6, 2008, 10:22 PM

What's this distributor C80F-12127-H from originally? View Thread - Bob Sprowl on Nov 5, 2008, 4:53 PM

69 CJ stick. n/m - Bob Hasty on Nov 5, 2008, 4:57 PM

Great all I've got is the body but I needed to know so I could put it in the classifieds. - Bob Sprowl on Nov 5, 2008, 5:08 PM

Re: What's this distributor C80F-12127-H from originally? - Anonymous on Nov 5, 2008, 4:57 PM

9C25 = March 25, 1969 - Tim Rossol on Nov 5, 2008, 5:48 PM

Still confused about the need to convert 2V cfm ratings to 4V calculations.... View Thread - hollis franks on Nov 5, 2008, 4:28 PM

The SAE testing procedure uses different standards for the carbs. - Bob Sprowl on Nov 5, 2008, 4:42 PM

Flow measurements need a depression value - Barry R on Nov 5, 2008, 5:00 PM

How they test carbs - Jay Brown on Nov 5, 2008, 5:03 PM

What is the vacuum in a NASCAR at race speeds? Ive wondered how much air they - Pippin on Nov 5, 2008, 9:54 PM

O/T, but at least it will keep our minds off other things..... View Thread - Mike U on Nov 5, 2008, 3:14 PM

Don't know but... - David on Nov 5, 2008, 10:14 PM

69/70 mustang bodts View Thread - gbagitator on Nov 5, 2008, 3:03 PM

Hey Gord - Dave Walters on Nov 5, 2008, 3:25 PM

sorry dave - Gord Bradley on Nov 5, 2008, 6:18 PM

Who is the manufacturer? - Anonymous on Nov 5, 2008, 10:24 PM

Re: 69/70 mustang bodts - r on Nov 5, 2008, 10:52 PM

Dynacorn - Tom P on Nov 8, 2008, 12:16 AM

rear cam plug View Thread - Steve Corbin on Nov 5, 2008, 2:58 PM

do you mean - Bob Hasty on Nov 5, 2008, 3:04 PM

Yeh, be careful. Goes in backwards compared to a normal freeze plug nm - Andy on Nov 5, 2008, 3:55 PM

cup - Steve Corbin on Nov 5, 2008, 5:43 PM

yup - Bob Hasty on Nov 5, 2008, 6:41 PM

May also have wear on cam thrust plate. Be careful.... - Andy on Nov 5, 2008, 7:36 PM

What did this come of of ??...I am cleaning out my garage, the # starts with "C4xxxxxx" View Thread - winr1 on Nov 5, 2008, 2:13 PM

Looks like truck - MeanGene on Nov 5, 2008, 2:22 PM

FT truck - Royce on Nov 5, 2008, 2:22 PM

Thanks!!..So..I could mount an FE in a street rod frame with this ??? - winr1 on Nov 5, 2008, 2:36 PM

Yes you can... - Tommy-T on Nov 5, 2008, 5:49 PM

Re: FT truck - Rory McNeil on Nov 5, 2008, 4:04 PM

Be careful - MeanGene on Nov 5, 2008, 4:21 PM

Looks like standard FE to me - Hawkrod on Nov 5, 2008, 4:49 PM

Great tip Hawkrod - Dave Walters on Nov 6, 2008, 6:01 AM

Aluminum timing cover? Or iron? n/m KS - KenS on Nov 5, 2008, 10:08 PM

Thanks guys!!...The cover is iron, I will see if an FE balancer fits the hole..I... - winr1 on Nov 5, 2008, 10:36 PM

For a very neat, lightweight.... - KenS on Nov 6, 2008, 8:59 PM

Rear main seal replacement View Thread - Rick on Nov 5, 2008, 1:41 PM

I loosen up the mains and push the to seal out with a hacksaw blade ground smooth..... - winr1 on Nov 5, 2008, 2:11 PM

The old "chinese finger" kits - StarlinerRon on Nov 5, 2008, 10:07 PM

fe related but way o/t contains the c word View Thread - matt on Nov 5, 2008, 1:04 PM

large pics - matt on Nov 5, 2008, 1:10 PM

Looks great!!!---for a .... - KenS on Nov 5, 2008, 1:16 PM

Universal mount... - Dave Walters on Nov 5, 2008, 1:36 PM

Also, - Don Ragan on Nov 5, 2008, 2:05 PM

JC Whitney sells a crossmember for an FE into an - Inthegarge on Nov 5, 2008, 3:28 PM

Why botch up a nice truck? eom - 1960 Town Vic on Nov 5, 2008, 7:31 PM

I agree - SteveR on Nov 5, 2008, 7:54 PM

ive put thousands of miles on one of those. I had a 292 in it - Pippin on Nov 5, 2008, 9:59 PM

I still say---Put an FE in it!!! - KenS on Nov 5, 2008, 10:16 PM

O/T Slick question View Thread - Ross on Nov 5, 2008, 12:09 PM

Perfect....... - F570rd on Nov 5, 2008, 12:42 PM

Have to watch... - BattlestarGalactic on Nov 5, 2008, 12:50 PM

Will it fit? - Jay Brown on Nov 5, 2008, 1:16 PM

Might be a problem... - Dave Walters on Nov 5, 2008, 1:32 PM

Thanks Dave n/m - Ross on Nov 5, 2008, 3:21 PM

I dont know honestly Jay - Ross on Nov 5, 2008, 3:21 PM

I have a set... - BattlestarGalactic on Nov 6, 2008, 6:13 AM

Larry, where do you live? - Ross on Nov 6, 2008, 6:59 AM

NE Ohio.... - BattlestarGalactic on Nov 6, 2008, 7:35 AM

Thanks for the offer, I may take you up on measurements - Ross on Nov 6, 2008, 8:53 AM

They're mounted and sitting in the garage.. - BattlestarGalactic on Nov 6, 2008, 3:02 PM

Tire Sizes and types - Mike Burch on Nov 5, 2008, 1:55 PM

Don't always believe those charts.. - BattlestarGalactic on Nov 6, 2008, 6:15 AM

Yea, the Hoosiers tend to run big.... - Mike Burch on Nov 6, 2008, 8:47 AM

Re: O/T Slick question - Brandon on Nov 5, 2008, 2:18 PM

The car may have had.... - Mike Burch on Nov 5, 2008, 2:27 PM

Yeah... - Dave Walters on Nov 5, 2008, 3:18 PM

Re: The car may have had.... - Brandon on Nov 5, 2008, 4:38 PM

Re: The car may have had.... - Rory McNeil on Nov 5, 2008, 9:20 PM

Looks like the front of the wheelwell has been trimmed.... - doug smith on Nov 6, 2008, 7:38 AM

Re: O/T Slick question - Anonymous on Nov 5, 2008, 2:35 PM

Thanks Afret - Ross on Nov 5, 2008, 3:24 PM

Slicks on Mustangs - Rory McNeil on Nov 5, 2008, 4:12 PM

Slicks on Cougar - DragBoss on Nov 5, 2008, 4:51 PM

hoosier quick time - ron b on Nov 5, 2008, 5:39 PM

The DOT tires... - Mike Burch on Nov 5, 2008, 5:47 PM

Ross, they GROW in diameter at RPM/speed too. n/m - Pippin on Nov 5, 2008, 10:02 PM

NHRA Stockers are limited to 30x9's - StarlinerRon on Nov 5, 2008, 10:23 PM

Gear Reduction Starter? View Thread - Kerry Johnson on Nov 5, 2008, 11:16 AM

I have a PowerMaster - Timmy390 on Nov 5, 2008, 12:11 PM

Robb Mc - DeWayne Lindsey on Nov 5, 2008, 12:43 PM

Length? - Kerry Johnson on Nov 5, 2008, 12:55 PM

re: length, the - Don Ragan on Nov 5, 2008, 2:16 PM

yes, robb mc - fordsel on Nov 5, 2008, 4:02 PM

What's it's length? - Kerry Johnson on Nov 5, 2008, 12:54 PM

With C-6 and Headers - Timmy390 on Nov 5, 2008, 1:09 PM

Starter - jmdjr67 on Nov 5, 2008, 2:30 PM

late model starter? - jon on Nov 5, 2008, 4:47 PM

<< Prev

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!