332-428 Ford FE Engine Forum (Page 9 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 22 Visitors 68FBMustang, 21 guests

Not logged in | Login | Create Account

Post Now!

585 SOHC on the dyno View Thread - Jay Brown on Dec 7, 2008, 6:27 PM

We all do hope.... - Bob on Dec 7, 2008, 6:33 PM

Man, for having a bad day~ - Wes Adams Ford428CJ on Dec 7, 2008, 7:09 PM

Not bad! - Tom P on Dec 7, 2008, 7:45 PM

Vacuum Pump - Jay Brown on Dec 7, 2008, 7:59 PM

Sealing Crankcase - David J on Dec 8, 2008, 5:30 AM

One thing you can do... - Jay Brown on Dec 8, 2008, 7:01 AM

Reversing real main seal may not.... - Bob on Dec 8, 2008, 7:54 AM

Re: One thing you can do... - steve on Dec 8, 2008, 8:16 AM

Terrible rod ratio! - William Conley on Dec 7, 2008, 8:33 PM

Buggy adjusters. - Dave Shoe on Dec 7, 2008, 9:24 PM

Good points - Keith Craft on Dec 7, 2008, 9:46 PM

Adjusters - Keith Craft on Dec 7, 2008, 9:40 PM

Re: Adjusters - Bill Holm on Dec 7, 2008, 9:50 PM

Adjusters and Cam - Jay Brown on Dec 8, 2008, 6:05 AM

LOL the "Joys" of "Bolt-On-Speed-Equipment" Jay unfortunately as you to frequen - qikBBstang on Dec 8, 2008, 6:48 AM

Talked to my contacts at Comp - Barry R on Dec 8, 2008, 3:51 PM

bummer jay... - robert on Dec 7, 2008, 10:40 PM

Jay, it is just my eyes or is there discoloration on the - Inthegarge on Dec 8, 2008, 3:04 AM

Your eyes are OK... - Jay Brown on Dec 8, 2008, 6:07 AM

Ignition trigger - David J on Dec 8, 2008, 5:37 AM

Distributor - Jay Brown on Dec 8, 2008, 6:10 AM

Crank triggered ignition... - Dave Walters on Dec 8, 2008, 6:11 AM

that was my first thought! Why Bother with monkey business! - Pippin on Dec 8, 2008, 6:47 AM

There's a lot more screwing around with a crank trigger... - Jay Brown on Dec 8, 2008, 9:50 AM

Crank trigger - Tom P on Dec 8, 2008, 10:43 AM

Re: There's a lot more screwing around with a crank trigger... - Dave Walters on Dec 8, 2008, 12:27 PM

Well, we're going to find out about that... - Jay Brown on Dec 8, 2008, 1:26 PM

Timing Chain - MeanGene on Dec 9, 2008, 12:53 PM

My crank trigger.... - KenS on Dec 8, 2008, 8:45 PM

Another potential problem - Steve Roehrs on Dec 8, 2008, 7:23 AM

Are those the Bill Coon Heads? - Royce on Dec 8, 2008, 7:58 AM

Those are Dove heads - Jay Brown on Dec 8, 2008, 8:25 AM

Jay - Tom in Vegas on Dec 8, 2008, 12:55 PM

I've been thinking about that.... - Jay Brown on Dec 8, 2008, 1:22 PM

Jay with respect to Dove Heads it would seem hard to believe they address heat treating - qikBBstang on Dec 8, 2008, 6:24 PM

4,700" bore spacing...?? - Kimmo on Dec 8, 2008, 1:01 PM

It is a Shelby block - Jay Brown on Dec 8, 2008, 1:29 PM

couldn't it have been done by... - Tom P on Dec 8, 2008, 3:04 PM

Rockers - FeWedge on Dec 8, 2008, 3:57 PM

240# on the seat, 600# over the nose n/m - Jay Brown on Dec 8, 2008, 5:00 PM

Rockers - FeWedge on Dec 8, 2008, 6:29 PM

Don't think so... - Jay Brown on Dec 8, 2008, 7:21 PM

Erratic timing - Brian Clayton on Dec 8, 2008, 4:25 PM

Dyno runs--- - Joe D. Craine on Dec 9, 2008, 6:12 AM

I never posted pics of this thing..... View Thread - Erik on Dec 7, 2008, 6:14 PM

clean! - Tom P on Dec 7, 2008, 7:37 PM

Nice 71! - Rory McNeil on Dec 7, 2008, 8:53 PM

Re: I never posted pics of this thing..... - Bill Holm on Dec 7, 2008, 9:51 PM

Nice! Classic lines, good looking truck! - Marty Haynes on Dec 7, 2008, 10:26 PM

Nice !!......I am partial to Ford trucks... - winr1 on Dec 8, 2008, 8:58 AM

Thanks guys! - Erik on Dec 8, 2008, 8:37 PM

Are you claiming that F250 is a 4x4? n/m - Josh on Dec 9, 2008, 8:39 PM

Nope, Nada 4x4.... - Erik on Dec 10, 2008, 4:42 PM

Kinda playin'... - Josh on Dec 10, 2008, 4:57 PM

Interesting.... - Erik on Dec 11, 2008, 4:34 PM

Pics of R Code Torino GT Posted in Photos Section View Thread - Todd Fowler on Dec 7, 2008, 5:38 PM

O/T: Happy Pearl Harbor Day! View Thread - Damon on Dec 7, 2008, 4:25 PM

Well said Damon... - winr1 on Dec 7, 2008, 4:31 PM

your Dad - Goose on Dec 8, 2008, 12:18 PM

Re: O/T: Happy Pearl Harbor Day! - Anonymous on Dec 7, 2008, 4:56 PM

Yes! Here's To Our WW II Vets. Now Lets Go Pee On A Mitsubishi - Wreckless Warren on Dec 7, 2008, 5:13 PM

We already took care of Mitsubishi... - Chris H on Dec 7, 2008, 7:00 PM

Mitsu also built Zero fighters - StarlinerRon on Dec 7, 2008, 11:01 PM

I think the galaxie must be too loud... View Thread - Chuck Brandt on Dec 7, 2008, 2:45 PM

That's too funny Chuck, I'll bet she had trouble ignoring you. n/m - David F. on Dec 7, 2008, 3:04 PM

Well Done Chuck! - Wreckless Warren on Dec 7, 2008, 3:17 PM

LOL, I always say the first real test of any engine build is when stuff on the shelves.... - D hearne on Dec 7, 2008, 4:14 PM

My mom too... - Tommy-T on Dec 8, 2008, 8:52 AM

Haa Haa, ROTFLMAO! n/m - Pippin on Dec 7, 2008, 9:08 PM

That's a great story ... - Mike Gaffney on Dec 7, 2008, 9:20 PM

Atta boy, Chuck...... - Brent Lykins, B2 Motorsports, LLC on Dec 8, 2008, 6:28 AM

Re: I think the galaxie must be too loud... - Erik on Dec 8, 2008, 8:41 PM

BJ/Scottsdale 09 View Thread - potter on Dec 7, 2008, 2:33 PM

Got to laugh at the cars that are no different then "Joe Blow Used Car Lot" offerings - qikBBstang on Dec 8, 2008, 6:58 AM

blue thunder View Thread - paul on Dec 7, 2008, 2:17 PM

take a look under links.... - robert on Dec 7, 2008, 2:24 PM

Try Barry at Survival - steve on Dec 7, 2008, 2:27 PM

Blue Thunder - Keith Craft on Dec 7, 2008, 9:43 PM

What parts in particular are you looking for? - Barry R on Dec 8, 2008, 3:10 AM

Re: blue thunder - RiverRacer on Dec 8, 2008, 3:23 PM

O/T are 1967 and 1968 Tilt steering columns for Mustang the same? View Thread - Pippin on Dec 7, 2008, 1:29 PM

No.......... - Dale on Dec 7, 2008, 4:30 PM

68/9 tilt columns are not identical in appearance and the flasher knobs are not different - Hawkrod on Dec 7, 2008, 4:56 PM

Re: 68/9 tilt columns are not identical in appearance and the flasher knobs are not different - John on Dec 7, 2008, 5:34 PM

What do you mean by early? - Royce on Dec 7, 2008, 6:15 PM

Didn't all 390's? - Tom P on Dec 7, 2008, 7:52 PM

I just sold a 67 tilt column - rcodecj Nick on Dec 7, 2008, 5:13 PM

----WARNING ON TILT STEERING--- - qikBBstang on Dec 8, 2008, 7:01 AM

WTF, Typical ford complication,... thank for answers. Sounds like a chevy van - Pippin on Dec 7, 2008, 9:23 PM

Tilt - Cory on Dec 7, 2008, 10:19 PM

"......Galaxies have much more leg room!", LOL, let's not forget the engine's roomy....... - Rod C on Dec 8, 2008, 5:08 AM

4? Try 8!, LOL, That was then... this is now. n/m - Pippin on Dec 8, 2008, 6:49 AM

Yeah, I meant 8, if they're sitting up, LOL.........n/m - Rod C on Dec 8, 2008, 7:02 AM

new here and gonna do a 66 fairlane GTA View Thread - bykpainter on Dec 7, 2008, 12:25 PM

Your patience.......... - Earl on Dec 7, 2008, 12:48 PM

Gta - Anonymous on Dec 7, 2008, 1:44 PM

67 - bykpainter on Dec 8, 2008, 5:36 AM

What ever you do... - Howie on Dec 7, 2008, 1:56 PM

"pro-touring" 66/67 fairlanes here - michael on Dec 7, 2008, 2:40 PM

Tubb it.... - Tommy-T on Dec 7, 2008, 3:48 PM

Now ya talkin!! - Andy (Oz) on Dec 8, 2008, 4:00 AM

Re: new here and gonna do a 66 fairlane GTA - bykpainter on Dec 8, 2008, 5:39 AM

OT,,rebuilt 351w runs terrible.. View Thread - Tbolt on Dec 7, 2008, 12:22 PM

Go back to basics.... - Brent on Dec 7, 2008, 1:54 PM

Re: Go back to basics.... - Tbolt on Dec 7, 2008, 3:25 PM

Yup, go back to basics. If you don't know if your gas was bad. - Inthegarge on Dec 7, 2008, 2:00 PM

What is manifold - Anonymous on Dec 7, 2008, 2:16 PM

Re: What is manifold - Tbolt on Dec 7, 2008, 3:34 PM

.020, plus valve - john vermeersch on Dec 7, 2008, 5:28 PM

Re: Yup, go back to basics. If you don't know if your gas was bad. - Tbolt on Dec 7, 2008, 3:27 PM

You might double check your timing as well. - Damon on Dec 7, 2008, 4:30 PM

Did you use a 351W cam.... - Bob on Dec 7, 2008, 6:01 PM

Re: Did you use a 351W cam.... - Tbolt on Dec 7, 2008, 6:41 PM

Visit us over at the - Bob on Dec 7, 2008, 6:46 PM

Try a new - Craig on Dec 7, 2008, 6:48 PM

don't just loosen the adjusters on your rockers - Kyle on Dec 8, 2008, 9:08 AM

Its scary to find out how many people don't know how to do that - Bill Ballinger on Dec 8, 2008, 3:20 PM

Bad Condenser will do this. - StarlinerRon on Dec 7, 2008, 11:05 PM

And keep in mind that a brand new condenser can be bad right out of the box. lol n/m - David F. on Dec 8, 2008, 12:23 PM

Intro & e85 390 build View Thread - Shane on Dec 7, 2008, 11:57 AM

what heads?? - robert on Dec 7, 2008, 2:34 PM

c7ae-a - Anonymous on Dec 7, 2008, 5:14 PM

if you can go with the... - robert on Dec 7, 2008, 10:37 PM

955 horsepower alum. 427 advertised on 422 Motorsports site, built by "The Wizard"?...N/M View Thread - hollis franks on Dec 7, 2008, 10:07 AM

Pic Link - qikBBstang on Dec 7, 2008, 10:20 AM

What's that bronze colored bolt between #3 and #4? - qikBBstang on Dec 7, 2008, 10:23 AM

Re: What's that bronze colored bolt between #3 and #4? - Gary on Dec 7, 2008, 10:49 AM

Just a shorter bolt with different finish, otherwise the same. - Dave Shoe on Dec 7, 2008, 10:50 AM

Bolts allow the heads to be removed with the engine in the car - Royce on Dec 7, 2008, 10:53 AM

that's a head bolt... - XR7 on Dec 7, 2008, 10:51 AM

I guess I'm slow ... - XR7 on Dec 7, 2008, 10:53 AM

You probably proofread your post. I didn't. - Dave Shoe on Dec 7, 2008, 11:04 AM

Same motor? - Jim on Dec 7, 2008, 6:25 PM

Re: Pic Link - derek on Dec 7, 2008, 1:25 PM

Love the welded v/c's and carb spacers/turners... - Inthegarge on Dec 7, 2008, 2:02 PM

Thats some really ... - Mike Gaffney on Dec 7, 2008, 5:38 PM

nice - Tom P on Dec 7, 2008, 8:04 PM

Same Motor , Same picture.. - DaleP on Dec 7, 2008, 8:23 PM

Not with that set up - Keith Craft on Dec 7, 2008, 9:51 PM

The Wizzard is.... - Jody Aberts on Dec 8, 2008, 4:22 AM

Re: 955 horsepower alum. 427 advertised on 422 Motorsports site, built by "The Wizard"?... - Jay Zolko on Dec 8, 2008, 10:19 PM

About those valve covers... - Kimmo on Dec 8, 2008, 10:46 PM

Re: About those valve covers... - Jay Zolko on Dec 9, 2008, 8:05 PM

E-mail sent.... n/m - Kimmo on Dec 11, 2008, 3:44 AM

Question for Scott Hollenbeck... View Thread - Dave Walters on Dec 7, 2008, 10:03 AM

Re: Question for Scott Hollenbeck... - Scott Hollenbeck on Dec 7, 2008, 1:46 PM

Timing Chain Quandry View Thread - KULTULZ on Dec 7, 2008, 9:48 AM

Two good questions for 58! - WerbyFord on Dec 7, 2008, 11:13 AM

MEL ENGINE FORUM - KULTULZ on Dec 7, 2008, 11:31 AM

58 timing chain - fordsel on Dec 7, 2008, 2:32 PM

Thanx fordsel! - KULTULZ on Dec 7, 2008, 3:01 PM

timing cover - fordsel on Dec 7, 2008, 6:58 PM

Re: timing cover - KULTULZ on Dec 7, 2008, 9:58 PM

timing cover - fordsel on Dec 8, 2008, 4:26 PM

Modified Mustangs & Fords View Thread - Earl on Dec 7, 2008, 9:42 AM

Thank You Earl - Howie on Dec 7, 2008, 1:44 PM

Congratulations to a real gentleman! - Marty Haynes on Dec 7, 2008, 10:45 PM

66 pulley alignment View Thread - Loren Smith on Dec 7, 2008, 9:20 AM

here's a try - Bob Hasty on Dec 7, 2008, 2:52 PM

Working on a basic web site for Ford FE.com~ View Thread - Wes Adams Ford428CJ on Dec 7, 2008, 9:16 AM

I don't have it set-up yet but I will! - Wes Adams Ford428CJ on Dec 7, 2008, 9:17 AM

Re: I don't have it set-up yet but I will! - FElony on Dec 7, 2008, 10:53 AM

Hey Felony, Do you want to help me out??? - Wes Adams Ford428CJ on Dec 7, 2008, 11:17 AM

Re: Hey Felony, Do you want to help me out??? - FElony on Dec 7, 2008, 3:33 PM

Re: Hey Felony, Do you want to help me out??? - John on Dec 7, 2008, 6:06 PM

I wont be able to do some of those things but~ - Wes Adams Ford428CJ on Dec 7, 2008, 9:48 PM

FElony, you're just very individualistic!! n/m KS - KenS on Dec 7, 2008, 11:26 AM

Hey Wes..sounds cool...if you need some help I am available. - winr1 on Dec 7, 2008, 11:46 AM

I sent ya an email Richard! n/m - Wes Adams Ford428CJ on Dec 7, 2008, 2:09 PM

Re: FElony, you're just very individualistic!! n/m KS - FElony on Dec 7, 2008, 3:50 PM

I listed my new site "FordFE.info" for that here a few months ago. - Bob Sprowl on Dec 7, 2008, 12:13 PM

That's what I'm doing now Bob.~ - Wes Adams Ford428CJ on Dec 7, 2008, 12:59 PM

i like the idea wes... - robert on Dec 7, 2008, 2:23 PM

Check Bob's site for ID pictures. n/m KS - KenS on Dec 7, 2008, 3:12 PM

ken just found out about.... - robert on Dec 7, 2008, 10:46 PM

Fantastic Idea........ - ford429cjlover on Dec 7, 2008, 4:07 PM

Articles - Paul Proefrock on Dec 7, 2008, 5:57 PM

Thanks Paul!~ - Wes Adams Ford428CJ on Dec 7, 2008, 7:15 PM

ARTICALS? - Josh on Dec 7, 2008, 6:45 PM

Sorry about that. - Wes Adams Ford428CJ on Dec 7, 2008, 7:13 PM

Just playin :-) n/m - Josh on Dec 7, 2008, 7:47 PM

Let's discuss our plans off line. - Bob Sprowl on Dec 7, 2008, 8:45 PM

email sent. N/M - Wes Adams Ford428CJ on Dec 7, 2008, 9:35 PM

OT:Proposed EPA Gas Tax View Thread - Wreckless Warren on Dec 7, 2008, 9:15 AM

LOL, cows will need a FART device at both ends as they emit methane from ...... - Rod C on Dec 7, 2008, 9:19 AM

Proof positive - FElony on Dec 7, 2008, 9:41 AM

This is already being done in some countries - James H on Dec 7, 2008, 9:51 AM

Heh...lol...lets harness the huge amount of hot air that spews from the mouths of..... - winr1 on Dec 7, 2008, 11:51 AM

Being done in the central valley - Tom J. on Dec 7, 2008, 11:52 AM

Many a truth is told in humor - Gary B on Dec 7, 2008, 2:03 PM

gary lol i love that... - robert on Dec 7, 2008, 2:44 PM

Using the words "common sense & Washington D.C." in the same sentence - Dave Eames on Dec 8, 2008, 9:29 AM

Common sense on "climate change" - Goose on Dec 7, 2008, 3:42 PM

Must be a .... - Mike Gaffney on Dec 7, 2008, 6:01 PM

O/T-Problem for all you Techs (and others).... View Thread - KenS on Dec 7, 2008, 9:06 AM

Re: O/T-Problem for all you Techs (and others).... - mikegt500 on Dec 7, 2008, 9:36 AM

No light, but.... - KenS on Dec 7, 2008, 10:04 AM

Alarms - FElony on Dec 7, 2008, 10:34 AM

Re: Alarms - Bobby Spears on Dec 7, 2008, 10:47 AM

Before you condemn the battery - 1960 Town Vic on Dec 7, 2008, 10:57 AM

I replaced the.... - KenS on Dec 7, 2008, 11:19 AM

The grounds of which I speak - 1960 Town Vic on Dec 7, 2008, 2:22 PM

Twin Cities FEs View Thread - steve meyer on Dec 7, 2008, 8:39 AM

I've hosted get togethers the last few years.... - Doug S on Dec 7, 2008, 4:01 PM

Stock intake info View Thread - brandon on Dec 7, 2008, 5:45 AM

What are the numbers you have? - Royce on Dec 7, 2008, 6:47 AM

Maybe Bob Sprowl's site - Howie on Dec 7, 2008, 6:57 AM

re numbers - brandon on Dec 7, 2008, 9:15 AM

Gal & Bird - WerbyFord on Dec 7, 2008, 11:09 AM

O/T "The Doghouse" Funny and/or Scarry? View Thread - qikBBstang on Dec 7, 2008, 3:19 AM

Hot starting problem View Thread - Paul on Dec 6, 2008, 11:16 PM

Whats the spec on cam and what is your initial timing? - Wes Adams Ford428CJ on Dec 6, 2008, 11:50 PM

Make sure - Wes Adams Ford428CJ on Dec 6, 2008, 11:52 PM

Cam and carb - Paul on Dec 7, 2008, 11:00 AM

Re: Hot starting problem - Roger Gardner on Dec 7, 2008, 6:14 AM

Hot start problem - Paul on Dec 7, 2008, 11:01 AM

my experience - Don on Dec 7, 2008, 9:35 AM

Hot starting problem - Paul on Dec 7, 2008, 11:04 AM

does it have a mallory unilite? n/m - Harry H on Dec 7, 2008, 11:43 AM

not the coolant - Don on Dec 7, 2008, 1:26 PM

Contract for new NHRA Ford Pro Stock head??? View Thread - Wes Adams Ford428CJ on Dec 6, 2008, 10:34 PM

More info~ - Wes Adams Ford428CJ on Dec 6, 2008, 10:42 PM

FORD isn't.... - XR7 on Dec 6, 2008, 10:47 PM

I read that in the 2nd forum, when Darin Morgan said - Wes Adams Ford428CJ on Dec 6, 2008, 11:06 PM

n/m - Gary Blair on Dec 7, 2008, 5:40 AM

Toyota - Jim on Dec 7, 2008, 5:58 AM

The Big 3 will probably be forced by Congress out of participating in NASCAR, NHRA........ - Rod C on Dec 7, 2008, 6:12 AM

Here's the new NHRA legal spec racer - Royce on Dec 7, 2008, 7:23 AM

They almost did it once before, the AMC Pacer - Bill Ballinger on Dec 7, 2008, 7:49 AM

Re: They almost did it once before, the AMC Pacer - FElony on Dec 7, 2008, 10:44 AM

Chrysler's current owner Cerberus Capital Management picked it up to get the financial div - qikBBstang on Dec 7, 2008, 1:40 PM

lol now thats a funny one royce... - robert on Dec 7, 2008, 3:05 PM

only $629,999.99 - Tom P on Dec 7, 2008, 8:12 PM

Merry Christmas to all the FE Rednecks View Thread - Gary B on Dec 6, 2008, 9:47 PM

LOL I might be a Red Neck~ - Wes Adams Ford428CJ on Dec 6, 2008, 9:55 PM

I want 10 seconds of my life back... - FeBird on Dec 6, 2008, 10:33 PM

Merry Christmas - Andy on Dec 7, 2008, 4:52 AM

It's probably some of the Canadian members at one of their get-togethers.... - Doug S on Dec 7, 2008, 7:18 AM

Redneck - David Ventura on Dec 7, 2008, 7:29 AM

As if I weren't blind enough - Bill Ballinger on Dec 7, 2008, 8:27 AM

You owe us all - Howie on Dec 7, 2008, 8:43 AM

Holy Moly! - FElony on Dec 7, 2008, 9:34 AM

Re: Merry Christmas to all the FE Rednecks - Jeff Tepper on Dec 7, 2008, 10:33 AM

Got that emailed to me by a Pontiac guy who wondered what the FE reaction would be - Gary B on Dec 7, 2008, 11:46 AM

Now I'm going to have to - Anonymous on Dec 7, 2008, 12:22 PM

I'll try to go one better, this may relieve some pain - Bill Ballinger on Dec 7, 2008, 2:07 PM

Great song, depressing lyrics - Gary B on Dec 7, 2008, 4:31 PM

Rodney can be pretty sarcastic, I cant help but think of Brittney Spears - Bill Ballinger on Dec 7, 2008, 5:37 PM

O/T Alarm on 2001 sable View Thread - Bob Hasty on Dec 6, 2008, 9:32 PM

Re: O/T Alarm on 2001 sable - Bobby Spears on Dec 7, 2008, 11:26 AM

Mine will sit for hours - Bob Hasty on Dec 7, 2008, 1:46 PM

O/T (Sort of) 1968 Torino 428 CJ Production Numbers View Thread - Todd Fowler on Dec 6, 2008, 8:27 PM

Re: O/T (Sort of) 1968 Torino 428 CJ Production Numbers - FElony on Dec 6, 2008, 8:39 PM

Post some pictures if your can...! n/m - Pippin on Dec 6, 2008, 9:03 PM

The number sounds good - Bob Hasty on Dec 6, 2008, 9:36 PM

If you specifically mean Torino.. - Jim on Dec 7, 2008, 4:37 AM

Low numbers of Fairlanes - Bob Hasty on Dec 7, 2008, 6:22 AM

Handful - Tom J. on Dec 7, 2008, 8:10 AM

Re: Handful - Todd Fowler on Dec 7, 2008, 1:32 PM

'68 428 CJ Torino production - Chris Teeling on Dec 7, 2008, 7:07 PM

Oiling Mods...........Please comment........... View Thread - Craig Mitchell on Dec 6, 2008, 8:13 PM

Here you go!~ - Wes Adams Ford428CJ on Dec 6, 2008, 8:25 PM

Also, what kind of cam are you running? - Wes Adams Ford428CJ on Dec 6, 2008, 8:40 PM

Hyd roller......... - Craig Mitchell on Dec 6, 2008, 8:49 PM

You bet Craig ! Also you may want to look~ - Wes Adams Ford428CJ on Dec 6, 2008, 8:56 PM

oiling - Gene on Dec 7, 2008, 4:13 AM

Are you saying that on a 427............. - Craig Mitchell on Dec 7, 2008, 6:23 AM

Re: Are you saying that on a 427............. - Gene on Dec 7, 2008, 10:50 AM

427 and truck - RJP on Dec 7, 2008, 12:29 PM

Thanks to all who responded.........nm - Craig Mitchell on Dec 7, 2008, 5:42 PM

Don't misinterpret that Ford tech bulletin............... - Cal on Dec 8, 2008, 5:42 AM

T&D SOHC Rockers installed... View Thread - Jay Brown on Dec 6, 2008, 7:16 PM

Right on Jay~ - Wes Adams Ford428CJ on Dec 6, 2008, 7:37 PM

Unfortunately the cammer guys have to be guinea pigs - William Conley on Dec 6, 2008, 9:33 PM

Re: T&D SOHC Rockers installed... - Mark on Dec 6, 2008, 9:35 PM

I didn't get a torque spec with the rockers... - Jay Brown on Dec 6, 2008, 9:51 PM

I figured I'd ask... - Mark on Dec 6, 2008, 10:10 PM

sohc rockers - Anonymous on Dec 7, 2008, 12:24 AM

Re: sohc rockers - Bart on Dec 7, 2008, 1:55 AM

sohc - Anonymous on Dec 7, 2008, 2:16 AM

Bad engineered adjusters - Rick Lake on Dec 7, 2008, 5:01 AM

If it were mine, - Jim Whitton on Dec 7, 2008, 5:27 AM

Work of art... - BattlestarGalactic on Dec 7, 2008, 7:24 AM

It's possible that... - Mark on Dec 7, 2008, 7:50 AM

As mentioned in my original post... - Jay Brown on Dec 7, 2008, 8:01 AM

Just as a safety measure.... - KenS on Dec 7, 2008, 8:10 AM

Broken adjuster - RWJ on Dec 7, 2008, 8:15 AM

Ah - you got me there... - Mark on Dec 7, 2008, 8:23 AM

Usually a broken adjuster - Barry R on Dec 7, 2008, 8:34 AM

Re: Usually a broken adjuster - Robert on Dec 7, 2008, 10:50 AM

Now, if it were me.... - Goose on Dec 7, 2008, 3:48 PM

Where can I get wall thickness checked ... View Thread - rick410fe on Dec 6, 2008, 4:09 PM

Usually no less then .100 cylinder wall thickness~ - Wes Adams Ford428CJ on Dec 6, 2008, 4:35 PM

Flow Technologies - Barry R on Dec 6, 2008, 6:23 PM

Thanks Barry, have a question for you.. - rick410fe on Dec 6, 2008, 6:27 PM

Nope - Barry R on Dec 6, 2008, 6:41 PM

I'll have to stop buy some time.. - rick410fe on Dec 6, 2008, 6:47 PM

a good carpenter and a tape measure - fordsel on Dec 7, 2008, 2:37 PM

Billet FE head.......Finally Done! View Thread - Brian Clayton on Dec 6, 2008, 3:54 PM

Any Pic's? N/M - rick410fe on Dec 6, 2008, 4:06 PM

Cant wait to hear - Ross on Dec 6, 2008, 4:12 PM

Now that's what I'm talking about!~ - Wes Adams Ford428CJ on Dec 6, 2008, 4:40 PM

Very fun new twist to the FE. - Dave Shoe on Dec 6, 2008, 5:26 PM

Very Interested - Barry R on Dec 6, 2008, 6:28 PM

Re: Very Interested - Brian Clayton on Dec 6, 2008, 7:36 PM

Barry if you can somehow find space in your backpack your EMC Intake would be a hit n/m - qikBBstang on Dec 7, 2008, 3:55 AM

What is the PRI show? N/M - rick410fe on Dec 6, 2008, 6:31 PM

Awesome! - Jay Brown on Dec 6, 2008, 6:42 PM

Re: Awesome! - Brian Clayton on Dec 6, 2008, 7:45 PM

I presume a Billet Head has water passages? When I was a kid I recall my friend who's dad - qikBBstang on Dec 7, 2008, 4:05 AM

Yes, they have water jackets - Brian Clayton on Dec 7, 2008, 7:19 PM

Manifold - SSdynosaur on Dec 6, 2008, 6:54 PM

Re: Manifold - Brian Clayton on Dec 6, 2008, 7:49 PM

Manifold - SSdynosaur on Dec 6, 2008, 9:17 PM

Re: Manifold - Brian Clayton on Dec 6, 2008, 9:19 PM

Chamber quench - SSdynosaur on Dec 6, 2008, 9:31 PM

Re: Chamber quench - Brian Clayton on Dec 6, 2008, 9:36 PM

Time for my annual gripe - FElony on Dec 6, 2008, 7:07 PM

Felony, your just gonna have to admit - Gary B on Dec 6, 2008, 7:16 PM

Re: Felony, your just gonna have to admit - FElony on Dec 7, 2008, 10:26 AM

Re: Time for my annual gripe - Brian Clayton on Dec 6, 2008, 7:29 PM

Why do we mess with these things? They are just junk. - Bill Ballinger on Dec 6, 2008, 7:44 PM

Because we are all crazy. - Brian Clayton on Dec 6, 2008, 7:51 PM

You got that right , I have been FE crazy all of my life - Bill Ballinger on Dec 6, 2008, 7:59 PM

Re: You got that right , I have been FE crazy all of my life - Brian Clayton on Dec 6, 2008, 8:04 PM

I am glad to see it, I wish I could afford to play - Bill Ballinger on Dec 6, 2008, 8:14 PM

Re: I am glad to see it, I wish I could afford to play - Brian Clayton on Dec 6, 2008, 8:19 PM

I still wonder how Pro Stock Paul did that, there had to be someone else involved - Bill Ballinger on Dec 6, 2008, 8:27 PM

Re: I still wonder how Pro Stock Paul did that, there had to be someone else involved - Brian Clayton on Dec 6, 2008, 8:39 PM

Adaptor Plates - FElony on Dec 6, 2008, 8:45 PM

Pic of the Black Widow - Mario428 on Dec 7, 2008, 6:40 AM

I'm in the same boat as you guys........ - Wes Adams Ford428CJ on Dec 6, 2008, 8:07 PM

BTW, your project committment is admirable, good going - Bill Ballinger on Dec 6, 2008, 7:54 PM

Sorry - FElony on Dec 6, 2008, 8:34 PM

Hey FelonyFord, Its called Blue Thunder~ - Wes Adams Ford428CJ on Dec 6, 2008, 8:50 PM

Here is where you can buy them too! - Wes Adams Ford428CJ on Dec 6, 2008, 8:51 PM

Do they take a stock valvetrain? - FElony on Dec 6, 2008, 8:52 PM

I think you have to run T&D Rocker set-ups on them~ - Wes Adams Ford428CJ on Dec 6, 2008, 8:58 PM

I know - FElony on Dec 6, 2008, 9:04 PM

I don't know that Iron would be much less and - Wes Adams Ford428CJ on Dec 6, 2008, 9:10 PM

Buy tunnel ports - Brian Clayton on Dec 6, 2008, 9:11 PM

Tunnel Ports cheap??? - Wes Adams Ford428CJ on Dec 6, 2008, 9:17 PM

No problem..... - Brian Clayton on Dec 6, 2008, 9:22 PM

I have a Q for ya!~ - Wes Adams Ford428CJ on Dec 6, 2008, 9:26 PM

You found me! - Brian Clayton on Dec 6, 2008, 9:28 PM

Always cool to know who you are typing to LOL. - Wes Adams Ford428CJ on Dec 6, 2008, 9:40 PM

Re: Always cool to know who you are typing to LOL. - Brian Clayton on Dec 6, 2008, 9:47 PM

If Jon Kaase thinks they are...... - Wes Adams Ford428CJ on Dec 6, 2008, 9:59 PM

I tried to get Jon to do these years ago.... - Brian Clayton on Dec 6, 2008, 10:03 PM

That sucks~ - Wes Adams Ford428CJ on Dec 6, 2008, 10:06 PM

Re: That sucks~ - Brian Clayton on Dec 6, 2008, 10:14 PM

Blue Thunders - Tom P on Dec 7, 2008, 8:34 PM

Here are some pix of the heads~ - Wes Adams Ford428CJ on Dec 6, 2008, 9:01 PM

Also you can run Garrett Rockers for those heads~ - Wes Adams Ford428CJ on Dec 6, 2008, 9:07 PM

Pretty stuff - FElony on Dec 6, 2008, 9:27 PM

I do BUT~ - Wes Adams Ford428CJ on Dec 6, 2008, 9:34 PM

Maybe not - FElony on Dec 6, 2008, 9:40 PM

I never had BIG $$$ in my rocker sets - Wes Adams Ford428CJ on Dec 6, 2008, 9:52 PM

Re: I never had BIG $$$ in my rocker sets - Brian Clayton on Dec 6, 2008, 9:55 PM

How BIG? - Wes Adams Ford428CJ on Dec 6, 2008, 10:08 PM

Re: How BIG? - Brian Clayton on Dec 6, 2008, 10:16 PM

FPP - FElony on Dec 7, 2008, 11:11 AM

what??? - XR7 on Dec 7, 2008, 11:51 AM

Re: what??? - FElony on Dec 7, 2008, 4:12 PM

won't work without - XR7 on Dec 7, 2008, 7:43 PM

Re: Sorry - Brian Clayton on Dec 6, 2008, 9:02 PM

600 Horse - FElony on Dec 6, 2008, 9:19 PM

Re: 600 Horse - Brian Clayton on Dec 6, 2008, 9:27 PM

Realize - FElony on Dec 6, 2008, 9:32 PM

Not really~ - Wes Adams Ford428CJ on Dec 6, 2008, 9:45 PM

Re: Not really~ - Brian Clayton on Dec 6, 2008, 9:54 PM

Please show us some pics. - steve on Dec 6, 2008, 8:13 PM

Re: Please show us some pics. - Brian Clayton on Dec 6, 2008, 8:18 PM

Hey Brian, way cool on the heads !!..Thanks for sharing the info... - winr1 on Dec 6, 2008, 10:56 PM

Dear FElony...... - Barry R on Dec 7, 2008, 6:29 AM

Rabotnick, don't you ever even DARE to - FElony on Dec 7, 2008, 10:23 AM

PSE pricing? - Gary on Dec 7, 2008, 10:47 AM

Re: PSE pricing? - FElony on Dec 7, 2008, 11:04 AM

FElony, I`m confused. - Rory McNeil on Dec 7, 2008, 11:43 AM

FElony - you're not really crazy at all - Barry R on Dec 7, 2008, 2:19 PM

Re: FElony - you're not really crazy at all - FElony on Dec 7, 2008, 4:35 PM

FElony "not crazy"? - Jim on Dec 7, 2008, 6:37 PM

Highly unlikely, Jim.... - DaleP on Dec 7, 2008, 8:25 PM

Stick Shift - FElony on Dec 8, 2008, 10:14 AM

Re: FElony, I`m confused. - FElony on Dec 7, 2008, 4:50 PM

there was a complete (adapter & intake) one for sale this year in San Francisco for $700 - JMO on Dec 7, 2008, 3:36 PM

Ed from Gordon, Ga..... - ford429cjlover on Dec 7, 2008, 4:21 PM

The very same - Brian Clayton on Dec 7, 2008, 7:25 PM

good to know you're making progress...... - ford429cjlover on Dec 8, 2008, 12:28 PM

O/T- How many CFM's is best in looking at Compressors View Thread - fakesnake.com on Dec 6, 2008, 3:47 PM

I would say 16-25cfm @ 90 PSI~ - Wes Adams Ford428CJ on Dec 6, 2008, 5:02 PM

How many CFM's is best in looking at Compressors - Tim on Dec 6, 2008, 5:34 PM

10 to 11 SCFM, $400 to $600...60 gallon tank...single stage... - Dr. Mabuse on Dec 6, 2008, 7:01 PM

Compressors - Worth, Blaine on Dec 6, 2008, 10:37 PM

For a GOOD unit at a GOOD price, go here... - Mike Burch on Dec 7, 2008, 8:19 AM

Rocker shaft question for Doug G (or others) View Thread - Tim Mc on Dec 6, 2008, 11:17 AM

Locktite will work or you could use a teflon sealer - Ray Hillebrand on Dec 6, 2008, 1:27 PM

Boss - Steve on Dec 6, 2008, 5:45 PM

Yes - Tim Mc on Dec 7, 2008, 5:11 AM

DSO ID HELP... View Thread - *QTRHRSE* on Dec 6, 2008, 10:14 AM

Re: DSO ID HELP... - Dennis on Dec 6, 2008, 10:38 AM

Re: DSO ID HELP... - Rory McNeil on Dec 6, 2008, 11:57 AM

Re: DSO ID HELP... - Anonymous on Dec 6, 2008, 2:07 PM

DSO - *QTRHRSE* on Dec 6, 2008, 5:06 PM

New oil smoke - how to diagnose where from? View Thread - Steve on Dec 6, 2008, 9:58 AM

start by - Bob Hasty on Dec 6, 2008, 10:05 AM

Pull the plugs - paul metzgar on Dec 6, 2008, 10:11 AM

One way: - Bob on Dec 6, 2008, 10:36 AM

Smokin` FE - Rory McNeil on Dec 6, 2008, 12:02 PM

When does it smoke? - Dave Shoe on Dec 6, 2008, 12:07 PM

What valve steam seal did you use??? - Wes Adams Ford428CJ on Dec 6, 2008, 2:06 PM

Deceleration smoke - Ross on Dec 6, 2008, 4:18 PM

If it is the Valve steam seal~ - Wes Adams Ford428CJ on Dec 6, 2008, 5:06 PM

Thanks for all the ideas! - Steve on Dec 6, 2008, 9:17 PM

Problems with a Teflon seal - Ross on Dec 7, 2008, 6:02 AM

Tri Power with big end carbs View Thread - FEDER on Dec 6, 2008, 9:52 AM

I've never seen a *modified* tripower dyno test here... - Dr. Mabuse on Dec 6, 2008, 10:16 AM

I show 4783 as 500cfm-2v - WerbyFord on Dec 6, 2008, 12:00 PM

CARBS - FEDER on Dec 6, 2008, 1:05 PM

Pictures? - Paul Proefrock on Dec 6, 2008, 1:23 PM

PICS - FEDER on Dec 6, 2008, 1:40 PM

Maybe - FEDER on Dec 6, 2008, 1:52 PM

4782/4783 Carbs are.......... - HP Trends on Dec 6, 2008, 1:36 PM

Werby, the Holley 500 is half of a DP 750 not the DP 850 - D hearne on Dec 7, 2008, 4:18 PM

Pro's and Cons of climate controlled garages/storage View Thread - Cliff Harmon on Dec 6, 2008, 9:49 AM

The humidity itself is controlled which is likely more critical then temp - qikBBstang on Dec 6, 2008, 10:07 AM

Re: Pro's and Cons of climate controlled garages/storage - Kirk on Dec 6, 2008, 10:13 AM

Low temp, slower rust?... - Dr. Mabuse on Dec 6, 2008, 10:33 AM

I wish we still had - Bob C on Dec 6, 2008, 10:41 AM

Bob, It's my understanding.... - KenS on Dec 6, 2008, 2:52 PM

Re: Low temp, slower rust?... - Mike Radke on Dec 6, 2008, 11:10 AM

Lower temp = lower rust - Joe Burnett on Dec 6, 2008, 2:46 PM

Humidity is the biggest culprit - Tim O'Connor on Dec 6, 2008, 2:56 PM

Yo, Cliff - FElony on Dec 6, 2008, 3:37 PM

What you do NOT want are temperature swings... - Mike Burch on Dec 6, 2008, 3:44 PM

I just finished a 1953 Kohler and Campbell console piano - Bill Ballinger on Dec 6, 2008, 7:28 PM

What the he!! - DragBoss on Dec 6, 2008, 8:57 PM

It comes from diving into water over my head and trying to swim out - Bill Ballinger on Dec 7, 2008, 11:12 AM

Fuel Pump ID Help View Thread - Rick Thompson on Dec 6, 2008, 9:36 AM

Could be a truck - petrol or diesel - Jeff on Dec 7, 2008, 9:39 PM

post photo View Thread - jack b fuche on Dec 6, 2008, 8:44 AM

I've found that photobucket works best. - David F. on Dec 6, 2008, 9:33 AM

Dearborn Classic's Project 64 Galaxie View Thread - Kerry Johnson on Dec 6, 2008, 8:35 AM

Re: Dearborn Classic's Project 64 Galaxie - Rory McNeil on Dec 6, 2008, 8:52 AM

I like it - Tom P on Dec 6, 2008, 9:48 AM

That'll be one flashy ride - ezgoing on Dec 6, 2008, 6:48 PM

afret (no address listed) You mind re-placing Pics? View Thread - qikBBstang on Dec 5, 2008, 11:02 PM

Done. n/m - Anonymous on Dec 6, 2008, 10:55 AM

64 Galaxie DSO not stamped View Thread - Marty on Dec 5, 2008, 10:05 PM

Cars without DSO numbers are units that were built when there were no orders - Hawkrod on Dec 5, 2008, 10:26 PM

A 60s NASCAR FE Racer and Current SCCA A/Sedan Driver passed this to me View Thread - qikBBstang on Dec 5, 2008, 9:59 PM

This was posted in the photo section a few days ago..and is..... - RonW on Dec 5, 2008, 10:12 PM

BB check Photos once in a while, i posted it last week ... - Pippin on Dec 5, 2008, 10:47 PM

HOLY CRAP! - Robert Tolleson on Dec 6, 2008, 5:59 AM

Bud Moore Engineering site: nice NASCAR pics - Bob on Dec 6, 2008, 7:39 AM

Lost racer found..... - Bob on Dec 6, 2008, 7:48 AM

Here's another cool video..... - Doug S on Dec 6, 2008, 8:49 AM

If you are going to rob a bank~ - Wes Adams Ford428CJ on Dec 6, 2008, 4:48 PM

Re: If you are going to rob a bank~ - Doug M. on Dec 6, 2008, 8:33 PM

Edelbrock Streetmaster Plenum Mods View Thread - Robert Tolleson on Dec 5, 2008, 9:02 PM

Re Request For: Edelbrock Streetmaster Plenum Mods - qikBBstang on Dec 5, 2008, 9:20 PM

Design sort of from Current Aftermarket Intakes like this - qikBBstang on Dec 5, 2008, 9:28 PM

Re: Edelbrock Streetmaster Plenum Mods - Jason Engle on Dec 6, 2008, 4:26 AM

Very Cool - Robert Tolleson on Dec 6, 2008, 5:45 AM

Does anyone have pix of Scott V port job on a ~ - Wes Adams Ford428CJ on Dec 6, 2008, 6:27 AM

Re: Edelbrock Streetmaster Plenum Mods - Anonymous on Dec 6, 2008, 11:33 AM

Re: why they don't extend the two divider walls that divide the center two cylinders - qikBBstang on Dec 7, 2008, 3:46 AM

We need Hat's View Thread - Howie on Dec 5, 2008, 6:37 PM

bumper stickers for the daily drivers . - Jaymz on Dec 5, 2008, 7:00 PM

Have at 'er Howie! - Barry Byer on Dec 5, 2008, 8:49 PM

hats - jeff on Dec 6, 2008, 6:15 AM

Hat's would be great .... - Mike Gaffney on Dec 6, 2008, 9:20 AM

Re: Hat's would be great .... - Ray Hillebrand on Dec 6, 2008, 1:40 PM

to back off or not to back off.... View Thread - robert on Dec 5, 2008, 5:08 PM

Re: to back off or not to back off.... - Bobby Spears on Dec 5, 2008, 5:36 PM

yes - fordsel on Dec 6, 2008, 11:21 AM

Are They Factory Adjustable Rockers? - Wreckless Warren on Dec 5, 2008, 6:46 PM

no they are the aftermarket... - robert on Dec 5, 2008, 8:47 PM

This is somewhat the same.... - KenS on Dec 6, 2008, 3:09 PM

New tool .... View Thread - Mike Gaffney on Dec 5, 2008, 3:53 PM

RE: Texas Thunder die cast's View Thread - john vermeersch on Dec 5, 2008, 2:46 PM

Texas Thunderrr die casts 'refurbish kit' available... - Scrap Iron on Dec 5, 2008, 6:15 PM

Heavy equipment will be necessary - Mark Artis on Dec 5, 2008, 7:24 PM

The Good and the UGLY - qikBBstang on Dec 5, 2008, 8:31 PM

lane collectables - wayne on Dec 6, 2008, 6:07 AM

Link to Lane Collectables... - Dr. Mabuse on Dec 6, 2008, 9:02 AM

INFO on e-pay View Thread - Rick Stafford on Dec 5, 2008, 2:32 PM

Re: INFO on e-pay - Ray62451 on Dec 5, 2008, 5:23 PM

Ford FE gear drive View Thread - Steve on Dec 5, 2008, 12:13 PM

I always wonder about 'wondering' posts that appear when certain ebay vendors are selling. - T on Dec 5, 2008, 12:44 PM

You are right. It does look sleazy. - Dave Shoe on Dec 5, 2008, 1:04 PM

Cam gear bolt holes slotted for advance/retard?...n/m - Dr. Mabuse on Dec 5, 2008, 1:03 PM

cam advance/retard so easy you don't have to back off ANY bolts... - T on Dec 6, 2008, 9:16 PM

Re: Ford FE gear drive - RiverRacer on Dec 5, 2008, 2:32 PM

Looks like Rube Goldberg was the designer of that piece... - Dave Walters on Dec 5, 2008, 2:35 PM

Gear Drive - FEDER on Dec 5, 2008, 4:59 PM

I must've been absent at A-FPRC the day when they 'moved' through our parts....... - Rod C on Dec 5, 2008, 7:01 PM

I remember - Ranch on Dec 6, 2008, 1:11 PM

forum faux pas - Steve on Dec 5, 2008, 7:19 PM

I must be getting old, it took 8 replies before I even noticed that corner-thingy...... - Rod C on Dec 5, 2008, 7:43 PM

I love seeing the "SHIT" Any part that was built for an FE is always cool to me - qikBBstang on Dec 5, 2008, 8:54 PM

An old PSE part, eh? Good investigating. - Dave Shoe on Dec 6, 2008, 5:31 PM

The test was done on another motor - Rick Lake on Dec 7, 2008, 5:34 AM

Just keeping the place clean. - Dave Shoe on Dec 5, 2008, 9:46 PM

Welcome Steve...........Oh, and I likem' too..................n/m - RonW on Dec 5, 2008, 10:16 PM

Welcome to Curmudgeon Central - MeanGene on Dec 6, 2008, 10:54 AM

Yeah whats the matter with someone jumpin rope? - Bill Ballinger on Dec 6, 2008, 8:45 PM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!