332-428 Ford FE Engine Forum (Page 2 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 21 Visitors 68FBMustang, 20 guests

Not logged in | Login | Create Account

Post Now!

427 Dyno Results View Thread - Jay Brown on Dec 26, 2008, 7:49 PM

Great info! - Joe Burnett on Dec 26, 2008, 8:40 PM

interesting for sure... - XR7 on Dec 26, 2008, 9:32 PM

Sorry... - Jay Brown on Dec 26, 2008, 9:55 PM

Nice Info - Rick Lake on Dec 27, 2008, 5:35 AM

EMC carbs - Barry R on Dec 27, 2008, 7:34 AM

Thanks for the continued great info & feedback Jay... - Mark on Dec 26, 2008, 10:26 PM

So much.... - Bob on Dec 27, 2008, 6:52 AM

carb cfm - gopher on Dec 27, 2008, 7:00 AM

never trust holley...... - mike saathoff on Dec 27, 2008, 9:13 AM

Thanks for conveying the Holley response on SA carbs - WerbyFord on Dec 27, 2008, 11:27 AM

Can't get there from here - Barry R on Dec 27, 2008, 7:32 AM

Carb cfm - Jay Brown on Dec 27, 2008, 7:50 AM

Thanks Barry! - Bob on Dec 27, 2008, 8:10 AM

Went hunting for some Holley cfm rating 'facts' and found.... - Bob on Dec 27, 2008, 8:42 AM

Holley isn't the only one... - Tommy-T on Dec 27, 2008, 9:31 AM

What is even more amazing is the 950HP - Bill Ballinger on Dec 28, 2008, 2:37 AM

Dry Flow on SF-600 - Joe D. Craine on Dec 27, 2008, 9:03 AM

Joe, thanks - do you recall the cfm splits - WerbyFord on Dec 27, 2008, 5:43 PM

Carb flow numbers - Joe D. Craine on Dec 27, 2008, 9:25 PM

Well thats interesting.... - doug smith on Dec 27, 2008, 9:54 AM

Any plans to test - Steve Roehrs on Dec 27, 2008, 7:25 AM

No EFI - Jay Brown on Dec 27, 2008, 7:52 AM

Re: 427 Dyno Results - Don W on Dec 27, 2008, 7:37 AM

There's some good data on that with the intakes I'm running... - Jay Brown on Dec 27, 2008, 7:56 AM

Jay maybe a better carb choice... - Royce on Dec 27, 2008, 8:03 AM

Adapter - Jay Brown on Dec 27, 2008, 8:18 AM

Moroso carb adapter - Royce on Dec 27, 2008, 9:31 AM

Wilson 027030 Adapter---Dom carb to 'Holley' bolt pattern manifold - Anonymous on Dec 27, 2008, 9:52 AM

Some more thoughts.............. - Blair Patrick on Dec 27, 2008, 9:51 AM

Dyno carb flow numbers - Rory McNeil on Dec 27, 2008, 10:08 AM

Blair I hope you take this constructively but at least in my case - qikBBstang on Dec 27, 2008, 8:30 PM

I always thought carbs had to be wet flowed for accuracy. Here's why... - rcodecj Nick on Dec 27, 2008, 4:37 PM

LOL I can only chuckle at the article downplaying dry flow - qikBBstang on Dec 27, 2008, 9:26 PM

Incorrect - rcodecj Nick on Dec 28, 2008, 12:15 PM

Editted. Wet flow can't increase the total CFM. - Bob Sprowl on Dec 28, 2008, 11:13 AM

Bob, I can't see where that PRO.... - Anonymous on Dec 28, 2008, 11:34 AM

Where does he say that wet flow increases cfm? - rcodecj Nick on Dec 28, 2008, 11:35 AM

Agreed, that's the way I read it (decreased flow)...n/m - Dr. Mabuse on Dec 28, 2008, 4:14 PM

Who would have thought that as - Michael Conner on Dec 28, 2008, 2:27 AM

Something that can be most frustrating if you are trying to compare things - Bill Ballinger on Dec 29, 2008, 7:10 AM

FE C4 bell housings View Thread - steve on Dec 26, 2008, 6:43 PM

Re: FE C4 bell housings - LivermoreDave on Dec 27, 2008, 4:21 PM

Re: FE C4 bell housings - Anonymous on Dec 27, 2008, 4:46 PM

bell housing weight - kirk on Dec 27, 2008, 5:58 PM

Re: FE C4 bell housings - ford-boy on Dec 27, 2008, 7:01 PM

What Is The Best Way To Clean Rust Out Of A Motorcycle Gas Tank? View Thread - Kyle on Dec 26, 2008, 5:27 PM

re rust in tank - brandon on Dec 26, 2008, 5:49 PM

I agree, that's exactly what I did 20 years ago to my - Cyclone crazy on Dec 26, 2008, 7:51 PM

rust - davis on Dec 26, 2008, 5:49 PM

Here's what I'd do............. - Blair Patrick on Dec 26, 2008, 6:44 PM

so start it in gear and ride it around to fix the clutch? - Kyle on Dec 26, 2008, 8:29 PM

Re: so start it in gear and ride it around to fix the clutch? - Andy on Dec 27, 2008, 6:57 PM

Kreem and Red-Kote are 2 sealers that come to mind............. - RonW on Dec 26, 2008, 7:30 PM

Vinegar and baking soda make a very strong drain - StarlinerRon on Dec 27, 2008, 8:44 PM

Kreem - Mike Z on Dec 26, 2008, 7:41 PM

POR-15 - Gerald on Dec 26, 2008, 8:23 PM

Crankcase oil/ oil filter? - MeanGene on Dec 26, 2008, 8:32 PM

Yamaha "Autolube". - Rory McNeil on Dec 26, 2008, 8:56 PM

Re: What Is The Best Way To Clean Rust Out Of A Motorcycle Gas Tank? - r on Dec 26, 2008, 10:01 PM

And this is FE related how?? - DaleP on Dec 26, 2008, 10:24 PM

FE's don't have gas tanks? eom - 1960 Town Vic on Dec 27, 2008, 6:06 AM

Pretty big stretch trying to equate.. - DaleP on Dec 28, 2008, 1:01 AM

DaleP, for whatever it is worth....................................... - RonW on Dec 28, 2008, 10:35 PM

Point taken Ron, and the .. - DaleP on Dec 28, 2008, 11:28 PM

two ideas - Don on Dec 27, 2008, 6:24 AM

I'll vote too for muriatic.... - Bob on Dec 27, 2008, 6:57 AM

Naval Jelly... - Josh on Dec 27, 2008, 8:14 AM

Window weight chain - Anonymous on Dec 27, 2008, 9:12 AM

Other ideas - Ken 67 Wagon on Dec 28, 2008, 8:51 AM

i think this is what i will do - Kyle on Dec 29, 2008, 6:59 AM

Yes, ive used - Pippin on Dec 28, 2008, 9:25 PM

Easiest Fix - DeWayne Lindsey on Dec 27, 2008, 9:16 AM

Eastwood sells a kit... - Tommy-T on Dec 27, 2008, 9:48 AM

easy - Pete\'s Ponies on Dec 28, 2008, 4:31 PM

Jan '09 MuscleCar Review mag is out... View Thread - Randy Millard on Dec 26, 2008, 5:08 PM

What's the best way to clean the old grease out of View Thread - James H on Dec 26, 2008, 5:08 PM

I either soak them in a clean tank of kerosen or... - mike saathoff on Dec 26, 2008, 5:26 PM

pb blaster? - Kyle on Dec 26, 2008, 5:29 PM

Is that for real? 18 to buy PBBlaster??......................n/m - RonW on Dec 26, 2008, 7:35 PM

PSSSTTT, hey, you wanna buy some PBBlaster - Cyclone crazy on Dec 26, 2008, 8:03 PM

Chuck you always bring a well needed laugh............... - RonW on Dec 26, 2008, 8:16 PM

Oops. double post............n/m - RonW on Dec 26, 2008, 8:17 PM

And here's a guy who wonders why he can't.. - DaleP on Dec 26, 2008, 8:56 PM

Valve Stem Seals View Thread - Luke on Dec 26, 2008, 2:09 PM

Need to know.... - RJP on Dec 26, 2008, 5:24 PM

Re: Need to know.... - Luke on Dec 26, 2008, 6:27 PM

Goodson for me too - Alan Casida on Dec 26, 2008, 8:00 PM

Re: Goodson for me too - Luke on Dec 27, 2008, 5:35 PM

Codes View Thread - Bob C on Dec 26, 2008, 1:22 PM

The codes change from year to year - Royce on Dec 26, 2008, 1:59 PM

Thanks Royce I did just that - Bob C on Dec 26, 2008, 2:49 PM

Shop construction question... View Thread - Brian Woodward on Dec 26, 2008, 11:25 AM

Don't even think about it... - W.KLINE on Dec 26, 2008, 11:29 AM

Can't support from bottom... - Brian Woodward on Dec 26, 2008, 11:38 AM

How long will the steel beam be? Is there an option of installing a post? Will........ - Rod C on Dec 26, 2008, 11:33 AM

The longest span is 44'...here are pics... - Brian Woodward on Dec 26, 2008, 11:48 AM

Check with your structrual engineer for the snow load - Kerry Johnson on Dec 26, 2008, 12:07 PM

Loads... - Brian Woodward on Dec 26, 2008, 12:43 PM

Re: Loads... - Ray Hillebrand on Dec 26, 2008, 12:59 PM

weight - Tom P on Dec 26, 2008, 1:08 PM

3/8" running thread - Kerry Johnson on Dec 26, 2008, 1:07 PM

Brian, I have had - john vermeersch on Dec 26, 2008, 1:12 PM

102 feet long!!! I'm sufferning from I-beam envy! n/m - Gary B on Dec 26, 2008, 9:55 PM

Re: Loads... - Scott on Dec 26, 2008, 1:18 PM

Gantry crane... - Dr. Mabuse on Dec 26, 2008, 1:50 PM

Easy enough - 1960 Town Vic on Dec 26, 2008, 2:25 PM

agree with Vermeersch - Jim Whitton on Dec 26, 2008, 2:27 PM

Me too... - Chris H on Dec 26, 2008, 4:20 PM

Small version of what you propose - Gary B on Dec 26, 2008, 2:38 PM

How about this? - Brian Woodward on Dec 26, 2008, 6:37 PM

bolt shear load - Joe Burnett on Dec 26, 2008, 7:03 PM

As long as I can't bite 'em in half... - Brian Woodward on Dec 26, 2008, 8:16 PM

You'll experience interference between trolley wheel and rod/nut through upper flange..... - Rod C on Dec 26, 2008, 8:24 PM

Looks good except for the cost :) - Gary B on Dec 26, 2008, 9:51 PM

I don't know about that... - Mark on Dec 26, 2008, 11:20 PM

OMG, Rube Goldberg would love it - 1960 Town Vic on Dec 27, 2008, 6:13 AM

2X6 times two. Sandwich.... - Anonymous on Dec 27, 2008, 10:07 AM

Fork Lifts - MeanGene on Dec 27, 2008, 8:15 AM

Re: Shop construction question... - Wreckless Warren on Dec 27, 2008, 10:04 AM

I wouldn't do it with bar joists, let alone wooden rafters. - Dave King on Dec 27, 2008, 11:28 PM

O/T Question for those hiding the MSD box in the interior of your 'Stangs, did you View Thread - TonyS. on Dec 26, 2008, 7:34 AM

Hiding box - Jim V on Dec 26, 2008, 9:40 AM

I used factory holes.... - doug smith on Dec 26, 2008, 10:06 AM

Hid it in front of the heater box - Royce on Dec 26, 2008, 12:35 PM

I put my MSD ..... - mike saathoff on Dec 26, 2008, 1:48 PM

My Mallory box is in the - DaleP on Dec 26, 2008, 10:30 PM

I have my Mallory box, my.... - Anonymous on Dec 27, 2008, 9:15 PM

ford 9 inch center sections View Thread - jeff on Dec 26, 2008, 5:26 AM

Yes - Barry Byer on Dec 26, 2008, 8:52 AM

Way O/T but were Home Theatre type Fiber Optic Cables designed by a moron? View Thread - qikBBstang on Dec 26, 2008, 2:39 AM

There's a moron involved, but it's not the guy that designed it - Jim Whitton on Dec 26, 2008, 3:58 AM

I use 'em - Bob C on Dec 26, 2008, 4:30 AM

It seems to me that you're not dealing with fiber optic, but an HDMI. The ............ - Rod C on Dec 26, 2008, 4:34 AM

Check this place - Bob C on Dec 26, 2008, 4:56 AM

Re: Way O/T but were Home Theatre type Fiber Optic Cables designed by a moron? - Wreckless Warren on Dec 26, 2008, 6:47 AM

New Stereo - Roger Gordon on Dec 26, 2008, 7:19 AM

When The Frequency Response of Your Ears Start Falling - Wreckless Warren on Dec 26, 2008, 8:20 AM

That sounds vaugely ... - Mike Gaffney on Dec 26, 2008, 8:39 AM

Blows Stereo - Roger Gordon on Dec 26, 2008, 9:56 AM

Some May Feel $11,000 Plus For Speakers Is A Bit Too Expensive - Wreckless Warren on Dec 26, 2008, 10:57 AM

I hear ya Warren, my state of the art Silvertone phonograph has some deluxe features...... - Rod C on Dec 26, 2008, 11:22 AM

Hearing Loss - Roger Gordon on Dec 26, 2008, 11:30 AM

Re: Way O/T but were Home Theatre type Fiber Optic Cables designed by a moron? - Beoweolf on Dec 26, 2008, 8:08 AM

LOL Oh boy were getting into the Bullshit makes it better Dept - qikBBstang on Dec 29, 2008, 7:29 PM

cable termination - Tom J. on Dec 26, 2008, 9:07 AM

sound&BB - gopher on Dec 26, 2008, 12:46 PM

This is why we like this Forum!! RIGHT? - Earl E on Dec 26, 2008, 7:57 PM

wife enjoys reading - Roger Gordon on Dec 26, 2008, 8:18 PM

Does this mean my Dynaco stuff is - StarlinerRon on Dec 26, 2008, 5:21 PM

Errh, Ron? Was that water-powered or did electricity exist then? - Bob on Dec 27, 2008, 9:21 AM

We park the Baker Electric outside the - StarlinerRon on Dec 27, 2008, 11:36 AM

Recomendations for Home Repair Contract View Thread - Cliff Harmon on Dec 26, 2008, 12:07 AM

Home Repair Contracts are universally a Joke/Ripp-Off - qikBBstang on Dec 26, 2008, 1:48 AM

Check your local utilities as many offer service contracts that cover appliances.......... - Rod C on Dec 26, 2008, 4:39 AM

As an HVAC contractor, all I've ever seen are a joke.... - Jim on Dec 26, 2008, 8:37 AM

Our experience has been best with no warranties, indepent contractors - Gary B on Dec 26, 2008, 9:13 AM

cliff - gopher on Dec 26, 2008, 12:53 PM

Sounds like someone got coal in their stocking. lol nm - Ray Hillebrand on Dec 26, 2008, 2:17 PM

I BEG YOUR PARDON MR. RAY - gopher on Dec 26, 2008, 4:42 PM

gopher................... - RonW on Dec 26, 2008, 9:48 PM

RON W - gopher on Dec 27, 2008, 6:55 AM

Dinner invition - Mark Artis on Dec 27, 2008, 7:05 AM

re: Gopher, - Don Ragan on Dec 27, 2008, 3:47 PM

poor ole Gopher.... - Mark Artis on Dec 27, 2008, 6:52 AM

So the drunk dropped his keys on the lawn - 1960 Town Vic on Dec 27, 2008, 1:21 PM

As a occasional visitor here, 2 solutions come to mind.. - blizz on Dec 29, 2008, 6:52 AM

Christmas cheer View Thread - Tom P on Dec 25, 2008, 11:19 PM

LOL! He was stuck on a 1% slope? What was the deal? - Pippin on Dec 25, 2008, 11:55 PM

Saw a similar thing on my street yesterday.. - DaleP on Dec 25, 2008, 11:59 PM

I'm not sure but remember he is a Chevy guy! - Tom P on Dec 26, 2008, 12:24 AM

tires - Gord Bradley on Dec 26, 2008, 5:09 AM

LOL, one driver, one co-pilot, one observer, and one pusher, yet the slope........ - Rod C on Dec 26, 2008, 4:45 AM

"snotlickers" - Craig on Dec 26, 2008, 5:24 AM

Xmas cheer - Paul on Dec 26, 2008, 5:49 AM

Vehicles vs. driver skill... - Mark Pruitt on Dec 26, 2008, 9:19 AM

Unexpected dyno results, carb question View Thread - Jay Brown on Dec 25, 2008, 9:34 PM

I'm glad you tried the dominator - Michael Conner on Dec 25, 2008, 10:13 PM

I would be curious about the Dominator Flange adapter "in reverse" - Pippin on Dec 25, 2008, 10:31 PM

I was thinking the same thing - Michael Conner on Dec 25, 2008, 10:46 PM

My vote, the three throat! - Joe Burnett on Dec 25, 2008, 10:16 PM

Re: Unexpected dyno results, carb question - 68xl on Dec 25, 2008, 10:42 PM

Doms - Tom P on Dec 25, 2008, 11:11 PM

CFM calulators are saying at 102% efficency, 7500 RPM, 427: - Pippin on Dec 25, 2008, 11:50 PM

It is an intake test - Rob on Dec 25, 2008, 11:47 PM

hmm "Quite the conundrum" perhaps the need for a Dominator is sort of a by-product - qikBBstang on Dec 26, 2008, 2:19 AM

Jay,Run the 4500 to4150 - Aaron J. Benham on Dec 26, 2008, 3:55 AM

Jay we saw the same thing - use the Dominator w / adapter - Royce on Dec 26, 2008, 4:00 AM

Royce speaks for me on this. - Bob Sprowl on Dec 26, 2008, 7:19 AM

I'd like to see you stick with the 4150s. The SS guys still use them. My TP 1x4....... - Rod C on Dec 26, 2008, 5:03 AM

Simply make pulls with each carb... - Mike Burch on Dec 26, 2008, 5:57 AM

I like BIG carbs - Barry R on Dec 26, 2008, 5:57 AM

1050 3 Barrel............. - Tommy A. on Dec 26, 2008, 6:55 AM

Try the BG 850 first--- - Joe D. Craine on Dec 26, 2008, 8:08 AM

The dominator to 4150 adapter - Anonymous on Dec 26, 2008, 8:52 AM

4150`s,Dom`s, and 3 barrels - Rory McNeil on Dec 26, 2008, 9:35 AM

Interesting results - MeanGene on Dec 26, 2008, 9:58 AM

I know what the problem is...... - XR7 on Dec 26, 2008, 10:43 AM

Re: I know what the problem is...... - Anonymous on Dec 26, 2008, 12:05 PM

well maybe..... - XR7 on Dec 26, 2008, 12:51 PM

Use the Dominator....also, see Mopar website 4150 to 4500 test results: - Bob on Dec 26, 2008, 12:07 PM

Nice blending work... - Mark on Dec 26, 2008, 2:08 PM

yes... - XR7 on Dec 27, 2008, 3:17 PM

Try my Victor with the 4150 - Joe D. Craine on Dec 26, 2008, 12:16 PM

I'd lean toward Thors take... - Mark on Dec 26, 2008, 2:03 PM

Jay............ - Blair Patrick on Dec 26, 2008, 6:22 PM

I agree with Blair--- - Joe D. Craine on Dec 26, 2008, 6:51 PM

sounds like a goodly-sized blob of a turtle might be a good test right about now... - JMO on Dec 26, 2008, 6:55 PM

Boy, I don't know... - Jay Brown on Dec 26, 2008, 7:59 PM

Re: Boy, I don't know... - Anonymous on Dec 27, 2008, 12:32 AM

I decided to respond to this thread - this is kinda long - Barry R on Dec 27, 2008, 6:30 AM

Hey Barry..... - Bob on Dec 27, 2008, 7:06 AM

The annular booster is the greatest thing since sliced bread - Bill Ballinger on Dec 28, 2008, 6:37 AM

It's called an 830 Bill - Mario428 on Dec 28, 2008, 10:58 AM

That is a nice carb, I want to use one on my "rowdy motor" - Bill Ballinger on Dec 28, 2008, 11:17 AM

yep... what he said - XR7 on Dec 28, 2008, 11:43 AM

Re: It's called an 830 Bill - Anonymous on Dec 28, 2008, 2:24 PM

Bill that's my chuckle of the month about your reworked carb that sucked itself dry! n/m - qikBBstang on Dec 29, 2008, 7:54 PM

Yep, overdid that one. - Bill Ballinger on Dec 29, 2008, 9:17 PM

Driveability, etc. - Jay Brown on Dec 27, 2008, 8:16 AM

All this info is still invaluable, even the setbacks.... - doug smith on Dec 27, 2008, 10:05 AM

INFORMATION - gopher on Dec 27, 2008, 3:13 PM

Texoutsider Mark did you get that 1950 dun for your wife View Thread - Bill Orrick on Dec 25, 2008, 7:35 PM

Not yet Bill - Mark Artis on Dec 26, 2008, 1:11 AM

428 oil consumption��and the lost lifter (Long). View Thread - Dave Bickler on Dec 25, 2008, 6:59 PM

Well Dave............................ - RonW on Dec 25, 2008, 7:41 PM

I agree, couple more ideas. - Pippin on Dec 25, 2008, 10:07 PM

I agree, make an attempt at new seals.. - Jim on Dec 26, 2008, 4:28 AM

oil restrictors...and more - RJP on Dec 26, 2008, 11:15 AM

Barrett Jackson Scottsdale ought to be interesting View Thread - qikBBstang on Dec 25, 2008, 6:25 PM

?? - Gord Bradley on Dec 25, 2008, 6:33 PM

Lot #32? Site not working for me but looks like a - Pippin on Dec 25, 2008, 10:38 PM

looks like a snoozefest to me - Tom P on Dec 25, 2008, 11:45 PM

The GM stuff - Barry R on Dec 26, 2008, 7:49 AM

Prices - steve meyer on Dec 26, 2008, 9:37 AM

O/T Don't know if we can handle another like this: JibJab 2008 review View Thread - qikBBstang on Dec 25, 2008, 6:05 PM

OT:70's Drag Racing & Pro Stock Early Years View Thread - Wreckless Warren on Dec 25, 2008, 3:57 PM

Re: OT:70's Drag Racing & Pro Stock Early Years - ford-boy on Dec 26, 2008, 6:00 AM

great video - Tom P on Dec 26, 2008, 11:07 AM

where to buy eagle fender emblems... View Thread - rick on Dec 25, 2008, 2:43 PM

Eagle Fender emblems - Anonymous on Dec 25, 2008, 4:30 PM

I got my 427 Fender Birds from Jack Hazelgren - Cliff Harmon on Dec 25, 2008, 11:57 PM

Emblems - Jeff V. on Dec 26, 2008, 5:23 AM

Got mine from Jack too..... - Glenn on Dec 26, 2008, 9:50 AM

Santa came.....and brought me ..... View Thread - W.KLINE on Dec 25, 2008, 2:08 PM

Re: Santa came.....and brought me ..... - 68xl on Dec 26, 2008, 10:34 AM

Tri ribs,,,, - W.KLINE on Dec 26, 2008, 11:35 AM

A question regarding Ford Factory T-10 shifters View Thread - Cliff Harmon on Dec 25, 2008, 2:02 PM

Re: A question regarding Ford Factory T-10 shifters - Bobby Spears on Dec 25, 2008, 2:48 PM

t-10 shifter - gopher on Dec 25, 2008, 4:05 PM

Use a HURST link - john vermeersch on Dec 25, 2008, 5:47 PM

Shifter repair - DYNO427 on Dec 25, 2008, 7:03 PM

Thats 20832. Bill does great work - StarlinerRon on Dec 25, 2008, 8:24 PM

Cliff, I have a console shifter handle that needs rechromed - Ray Hillebrand on Dec 25, 2008, 6:06 PM

not sure what people did, but i either have - Pippin on Dec 25, 2008, 9:57 PM

Cliff, I just gotta clue you in.......... - Mark Artis on Dec 26, 2008, 1:13 AM

O/T Wow! a Y-Block gold mine here: View Thread - Bob on Dec 25, 2008, 11:49 AM

Re: O/T Wow! a Y-Block gold mine here: - Rory McNeil on Dec 25, 2008, 12:21 PM

Re: O/T Wow! a Y-Block gold mine here: - Bobby Spears on Dec 25, 2008, 3:03 PM

Bobby, There is a 57 business sedan (3 pass) - StarlinerRon on Dec 25, 2008, 8:29 PM

Bang for the buck - Phil63 on Dec 26, 2008, 9:25 AM

Changing pistons View Thread - Dean on Dec 25, 2008, 10:57 AM

Re: Changing pistons - e. philpott on Dec 25, 2008, 11:10 AM

Dean...I'm sticking my - john vermeersch on Dec 25, 2008, 12:20 PM

Agree with both...................................... - RonW on Dec 25, 2008, 1:11 PM

Check piston weights, you may need to - StarlinerRon on Dec 25, 2008, 8:33 PM

Merry Christmas everyone, from northwest Florida,,,,,,,n/m View Thread - RonW on Dec 25, 2008, 9:46 AM

Merry Christmas to you Ron nm - Craig Mitchell on Dec 25, 2008, 6:33 PM

ATTN. TORINO PAT View Thread - gopher on Dec 25, 2008, 8:43 AM

merry christmas/withdrawls View Thread - brandon on Dec 25, 2008, 8:42 AM

82 Deg and sunny here - George Vega on Dec 26, 2008, 11:19 AM

Merry Christmas from Arizona View Thread - ezgoing on Dec 25, 2008, 8:04 AM

Back at ya! - Brian Woodward on Dec 25, 2008, 9:13 AM

and Ho Ho Ho from here too - Hawkrod on Dec 25, 2008, 9:38 AM

took a ride with a guy in Barrow Alaska who taught there in winter, summered in Houston... - JMO on Dec 25, 2008, 10:49 AM

Saving Detroit View Thread - 1960 Town Vic on Dec 25, 2008, 6:33 AM

not a bad idea, .... - mike saathoff on Dec 25, 2008, 6:54 AM

wont work - J. Deere on Dec 25, 2008, 6:40 PM

problems in USA - Gene on Dec 25, 2008, 6:55 AM

Re: problems in USA - Gene on Dec 25, 2008, 7:03 AM

First ... enforce the immigration laws, then talk about welfare. - Beoweolf on Dec 25, 2008, 8:30 AM

Re: First ... enforce the immigration laws, then talk about welfare. - HF on Dec 25, 2008, 8:47 AM

That was an amazing statement: "Free trade creates averaging of lifestyle." That's the - qikBBstang on Dec 25, 2008, 2:02 PM

Well, we all know AIDS cures obesity - Beoweolf on Dec 25, 2008, 8:54 AM

so because your obese you are lazy? - matt on Dec 25, 2008, 12:10 PM

Re: so because your obese you are lazy? - callahan on Dec 25, 2008, 4:10 PM

You missed nothing ... - Beoweolf on Dec 27, 2008, 9:34 AM

Oh, they see it, it help build them more power and $$ on our backs. - Pippin on Dec 25, 2008, 10:11 PM

For those looking from afar, it's doable. However, the cost associated with totally....... - Rod C on Dec 25, 2008, 7:12 AM

not clearly thinking - HF on Dec 25, 2008, 8:10 AM

Do what the Romans did - paul metzgar on Dec 25, 2008, 8:41 AM

Re: Do what the Romans did - HF on Dec 25, 2008, 8:42 AM

Funny, thats what the Job core is/was about.... - Beoweolf on Dec 25, 2008, 8:45 AM

Back on their feet? - Jim on Dec 25, 2008, 9:46 AM

Re: Back on their feet? - derek on Dec 25, 2008, 10:07 AM

I'm working on my sign now,.... - DaleP on Dec 25, 2008, 3:04 PM

I did that! - Tom P on Dec 25, 2008, 11:53 PM

You think more social programs would help this????? - Gary B on Dec 25, 2008, 10:24 AM

The important thing out of all that you said ....you just agreed - Beoweolf on Dec 25, 2008, 10:53 AM

Re: The important thing out of all that you said ....you just agreed - steve on Dec 25, 2008, 12:26 PM

social programs - callahan on Dec 25, 2008, 10:59 AM

Re: Saving Detroit - Anonymous on Dec 25, 2008, 11:06 AM

change - Gene on Dec 25, 2008, 2:02 PM

AMEN, C5HM Great society my a$$. - StarlinerRon on Dec 25, 2008, 8:54 PM

Why? if it doesn't work, can't be made to work, harvest what you can and move. - JMO on Dec 25, 2008, 1:52 PM

The Bailout Time Bomb should/will make you sick - qikBBstang on Dec 25, 2008, 2:22 PM

Japan also lowered their's to 25 basis points (0.25%)............n/m - Rod C on Dec 25, 2008, 7:16 PM

In reality - Earl on Dec 25, 2008, 3:03 PM

Google "Iraq awards power plant construction" contracts to everyone but USA - qikBBstang on Dec 25, 2008, 6:36 PM

Re: Google "Iraq awards power plant construction" contracts to everyone but USA - Tbolt on Dec 25, 2008, 6:56 PM

Saving the World - Mark A. Spatz on Dec 25, 2008, 6:41 PM

social utopia - Jesse Jackson on Dec 25, 2008, 7:03 PM

If you view your world thru the eyes of "oppression" you'll never see "oppurtunity&qu - Dave Eames on Dec 26, 2008, 7:15 PM

Detroit not dead...yet - Jason on Dec 25, 2008, 8:03 PM

moderators?...Don't ever purge a post again. - Mark Artis on Dec 26, 2008, 5:57 AM

Well - 1960 Town Vic on Dec 26, 2008, 10:32 AM

Why not a "Save Miami"?...or any other city? - Mark Artis on Dec 26, 2008, 8:39 PM

so much for - 1960 Town Vic on Dec 27, 2008, 6:17 AM

worked up about? what a can of worms - Mark Artis on Dec 27, 2008, 7:02 AM

New Orleans,let's see a bowl surrounded on three sides by water - Bill Ballinger on Dec 28, 2008, 10:26 AM

For those having heart attacks reading the above post... - Bill Ballinger on Dec 28, 2008, 11:14 AM

But what you said is true!! - Anonymous on Dec 28, 2008, 11:55 AM

LOL - Bill Ballinger on Dec 28, 2008, 12:48 PM

The thing about is, you white folks don't dig it; a brother's gotta make a living too! - Dave Eames on Dec 29, 2008, 3:14 PM

LOL - Bill Ballinger on Dec 29, 2008, 9:07 PM

SANTA View Thread - DEAN FORSTER on Dec 25, 2008, 5:29 AM

Merry Christmas View Thread - 427GT on Dec 25, 2008, 5:27 AM

You must've been a very good boy and Santa must have some 'guns' to tote those around..n/m - Rod C on Dec 25, 2008, 5:42 AM

Your so lucky ! I got a - mike saathoff on Dec 26, 2008, 1:53 PM

Some "Real" Christmas stories View Thread - Bob C on Dec 25, 2008, 4:33 AM

Thanks Bob, that is a small sample of the Christmas sharing going on throughout the world. - Rod C on Dec 25, 2008, 5:25 AM

O/T electric motor repair or replace? View Thread - Tim O'Connor on Dec 24, 2008, 7:12 PM

What's wrong with it? - Kerry Johnson on Dec 24, 2008, 8:02 PM

Re: What's wrong with it? - Rory McNeil on Dec 24, 2008, 8:31 PM

What happened to it? - BattlestarGalactic on Dec 24, 2008, 8:40 PM

Old motors are best. Rebuildable cheaply - StarlinerRon on Dec 24, 2008, 8:41 PM

Rebuild it....nm - John on Dec 24, 2008, 10:51 PM

Re: O/T electric motor repair or replace? - Dennis on Dec 24, 2008, 11:19 PM

Dennis, we still look at them in my shop. We also have a Motor Crib for production-line... - Rod C on Dec 25, 2008, 5:39 AM

Motor Repair - John Ferguson on Dec 25, 2008, 5:01 AM

Runs 1 minute/ trips C.B. - Tim O'Connor on Dec 25, 2008, 5:04 AM

It may simply need a cleaning. The commutator may have a build up .......... - Rod C on Dec 25, 2008, 5:36 AM

Uhhhh, circuit breakers wear out also... - Mike on Dec 25, 2008, 9:50 AM

I must disagree with Mike. Circuit breakers do not lose anything from the first time...... - Rod C on Dec 25, 2008, 7:39 PM

a faulty power cord can restrict the voltage, raising the amp and - Pippin on Dec 25, 2008, 9:52 PM

That has not been my experience - 1960 Town Vic on Dec 27, 2008, 6:22 AM

I hate it when that happens...n/m - Dr. Mabuse on Dec 27, 2008, 8:29 AM

Could be the strating switch - Steve Roehrs on Dec 25, 2008, 8:05 AM

Relay on side/end w/contact points - Tim O'Connor on Dec 25, 2008, 9:41 AM

Points - Steve Roehrs on Dec 25, 2008, 10:09 AM

those old motors were monsters... - Dr. Mabuse on Dec 25, 2008, 10:44 AM

Nope, no more efficient - StarlinerRon on Dec 25, 2008, 9:16 PM

Urban Legend? - Gary B on Dec 26, 2008, 9:29 AM

See what you can find on Ebay - William Conley on Dec 25, 2008, 8:00 PM

Yep, got a 5er - MeanGene on Dec 26, 2008, 12:59 AM

Couple old industrial motors - MeanGene on Dec 26, 2008, 12:13 PM

tires on 63 View Thread - Richard on Dec 24, 2008, 6:31 PM

You can't use a very tall tire. I tried 265's on mine and they - Inthegarge on Dec 24, 2008, 6:59 PM

I ran G-70 x 15 on my Galaxie. The rims were 6". The H-70s would rub....... - Rod C on Dec 25, 2008, 5:46 AM

235 75 R15... - Val406 on Dec 26, 2008, 2:39 AM

Clearance - Terry on Dec 26, 2008, 8:45 AM

Cristmas Greetings View Thread - Worth, Blaine on Dec 24, 2008, 6:17 PM

Merry Christmas.... - Daryle on Dec 24, 2008, 11:40 PM

Merry Christmas from NorCal - Damon on Dec 25, 2008, 12:56 AM

1957 headers View Thread - john tolliver on Dec 24, 2008, 5:08 PM

I ran a set of Hedman on a 55 Ford with an FE. Had to - Inthegarge on Dec 24, 2008, 7:02 PM

Re: 1957 headers - Rory McNeil on Dec 24, 2008, 8:39 PM

57 headers - gopher on Dec 25, 2008, 7:59 AM

57 headers - john tolliver on Dec 25, 2008, 12:01 PM

Re: 1957 headers - SlowFord on Dec 25, 2008, 8:49 AM

57-58 ford - fordsel on Dec 25, 2008, 9:06 AM

57 control arms - FeWedge on Dec 27, 2008, 9:47 AM

There was a reason the Factory used Up swept headers... - Beoweolf on Dec 25, 2008, 9:07 AM

anyone still make '57-59 fenderwell headers?...n/m - Dr. Mabuse on Dec 25, 2008, 10:37 AM

I seriously doubt it... would they even pass road inspection/smog? - Beoweolf on Dec 25, 2008, 11:04 AM

Jardine became Pinnacle Performance and they.... - Bob on Dec 25, 2008, 11:40 AM

More '57 stuff.............. - Bob on Dec 25, 2008, 11:47 AM

Hooker super comp 6113 - Charles Logsdon on Dec 25, 2008, 11:50 PM

merry xmas ... and a funny email View Thread - Donnie on Dec 24, 2008, 3:54 PM

Merry Christmas to you to Donnie - Bob Hasty on Dec 24, 2008, 4:00 PM

slow - Donnie on Dec 24, 2008, 4:17 PM

Re: merry xmas ... and a funny email - Wreckless Warren on Dec 24, 2008, 4:44 PM

got a heater - Donnie on Dec 24, 2008, 5:13 PM

garage heaters - Bob Hasty on Dec 24, 2008, 8:37 PM

`63 Indy V8 pics for Gary Blair View Thread - HenryFloored on Dec 24, 2008, 1:41 PM

Small block w/mushroom lifters & shaft rockers?...n/m - Dr. Mabuse on Dec 24, 2008, 6:12 PM

notice too... - Tom P on Dec 24, 2008, 8:12 PM

Probably borrowed from a 292 or 312 OHV Y block - Dennis on Dec 24, 2008, 11:24 PM

Thank you Henry n/m - Gary Blair on Dec 25, 2008, 7:02 AM

Cool! - Bob on Dec 25, 2008, 7:52 AM

Exhaust ports were not thought to be a big deal back then... - Beoweolf on Dec 25, 2008, 9:16 AM

"Rev kit" - HenryFloored on Dec 25, 2008, 8:08 AM

Sure.... - Bob on Dec 25, 2008, 9:02 AM

I agree Bob - HenryFloored on Dec 25, 2008, 9:23 AM

Mustang vs. Corvette says you are wrong... - Dr. Mabuse on Dec 25, 2008, 10:32 AM

True but...... - Bob on Dec 25, 2008, 11:12 AM

n/m - Bob on Dec 25, 2008, 9:10 AM

How about a 1936 Cadillac? - Bob on Dec 25, 2008, 9:11 AM

That 1100 CID tank engine IN A MUSTANG! Video: - Pippin on Dec 25, 2008, 11:09 PM

To All--- View Thread - KenS on Dec 24, 2008, 12:53 PM

Same to you, and all the FE Forum N/M - Dan on Dec 24, 2008, 1:16 PM

If I get what I deserve, I'm in a lot of trouble! - mike saathoff on Dec 24, 2008, 1:37 PM

Yeah.......... - Earl on Dec 24, 2008, 3:06 PM

Have an egg nog - Royce on Dec 24, 2008, 6:08 PM

I'm on it now, but no nogs in my eggs... - DaleP on Dec 24, 2008, 6:16 PM

TO ALL. give me the nogs from DaleP eggs - Bill Orrick on Dec 24, 2008, 6:50 PM

Jeez, I hope not.... - doug smith on Dec 24, 2008, 8:19 PM

the bad new is that I think I will........ - Mike U on Dec 25, 2008, 1:20 PM

Lifter Bleeding View Thread - Scott on Dec 24, 2008, 11:51 AM

Is the engine on the stand or in the car? - Brent on Dec 24, 2008, 3:12 PM

Re: Is the engine on the stand or in the car? - Scott on Dec 24, 2008, 4:02 PM

Re: Is the engine on the stand or in the car? - Anonymous on Dec 24, 2008, 6:05 PM

Re: Is the engine on the stand or in the car? - Scott on Dec 25, 2008, 9:05 PM

Scott Hollenbeck, after visiting your registry site I noticed in the timing cover ID...... View Thread - Rod C on Dec 24, 2008, 8:44 AM

You are correct, cast parts like that are dated - Hawkrod on Dec 24, 2008, 9:09 AM

Re: Scott Hollenbeck, after visiting your registry site I noticed in the timing cover ID...... - Scott Hollenbeck on Dec 25, 2008, 7:40 AM

It's a very nice site, even for someone who doesn't own a Mustang. I did learn about the.. - Rod C on Dec 25, 2008, 10:41 AM

Merry Christmas From Apple Valley (some pics!) View Thread - Hawkrod on Dec 24, 2008, 8:19 AM

was hoping you got it done - Kerry on Dec 24, 2008, 8:42 AM

Hawk, do you have.... - KenS on Dec 24, 2008, 9:01 AM

I installed a sub panel a couple of years ago - Hawkrod on Dec 24, 2008, 9:11 AM

With all of the stupid stuff that has happened in the last few weeks I was amazed I did it - Hawkrod on Dec 24, 2008, 9:04 AM

Nice Job! - Joe Burnett on Dec 24, 2008, 9:20 AM

Looks nice Hawk, glad to hear you are back on your feet from the storm. - David F. on Dec 24, 2008, 9:39 AM

Merry Christmas Hawk - Wreckless Warren on Dec 24, 2008, 9:56 AM

Truly Amazing Work There, TC - FElony on Dec 24, 2008, 9:56 AM

snow? - Tom P on Dec 24, 2008, 10:25 AM

How did I know who wrote this without looking at the signature? n/m KS - KenS on Dec 24, 2008, 12:51 PM

Hey Hawkrod - Lowell on Dec 24, 2008, 12:58 PM

Not hard to find, Corner of Flathead, Tonawanda and Shoshone - Hawkrod on Dec 24, 2008, 1:32 PM

i see - Tom P on Dec 24, 2008, 8:28 PM

Those pics are from last year - Hawkrod on Dec 25, 2008, 5:24 AM

Looks great ... - Mike Gaffney on Dec 24, 2008, 1:31 PM

Nice display. I put slightly less effort... - DaleP on Dec 24, 2008, 4:25 PM

nice work - Jim Wysocki on Dec 24, 2008, 8:32 PM

Merry Christmas! and both displays, large and small are deserving of a cheers! - Pippin on Dec 24, 2008, 10:06 PM

Has anyone used Stans headers. View Thread - Rick on Dec 24, 2008, 7:57 AM

If they are in Auburn Washington... - Mark Pruitt on Dec 24, 2008, 9:53 AM

Stan & Stan - Jim on Dec 24, 2008, 1:36 PM

On my Hi-Boy - Steve on Dec 24, 2008, 9:59 AM

Re: Has anyone used Stans headers. - ford-boy on Dec 24, 2008, 12:09 PM

Re: Has anyone used Stans headers. - derek on Dec 24, 2008, 7:40 PM

Merry Christmas from Oklahoma! View Thread - Don K. on Dec 24, 2008, 7:20 AM

Same to you Don, and our prayers especially go out to your wife. - David F. on Dec 24, 2008, 9:36 AM

Best wishes, and hope she is well soon. n/m - Lowell on Dec 24, 2008, 1:01 PM

O/T 2000 F250 Tranny ID View Thread - Dan W on Dec 24, 2008, 6:09 AM

Most are 5 speeds depending on which engine - Bobby Spears on Dec 24, 2008, 8:38 AM

Manual or automatic?...n/m - Dr. Mabuse on Dec 24, 2008, 6:16 PM

Engine won't run - tips? (this is a good one, trust me) View Thread - David on Dec 24, 2008, 5:59 AM

I'll bite--- - Joe D. Craine on Dec 24, 2008, 6:40 AM

Didn't understand PCV really - David on Dec 24, 2008, 6:58 AM

Joe, a road draft tube is not a PCV system, it is simply a crankcase vent - Hawkrod on Dec 24, 2008, 8:58 AM

I thought that was what I said--- - Joe D. Craine on Dec 24, 2008, 11:00 AM

Hawk, I'm not disagreeing with you, but I think you stopped short of a full explanation. - David F. on Dec 25, 2008, 5:48 AM

It's simple really. You have to have someplace for the - Inthegarge on Dec 24, 2008, 7:03 AM

PCV or road draft tube: - Bob on Dec 24, 2008, 7:14 AM

Real simple crankcase - john vermeersch on Dec 24, 2008, 8:28 AM

John, that is a great example. Never quite looked at - Inthegarge on Dec 24, 2008, 8:32 AM

Yes, that's..........John....did you run a........ - Bob on Dec 24, 2008, 8:43 AM

John,true but think about it - Bobby Spears on Dec 24, 2008, 8:49 AM

It appears that the guys solved the overpressure problem, the intermittent.... - hollis franks on Dec 24, 2008, 10:30 AM

Stuck valve or simply overpressure - David on Dec 24, 2008, 11:47 AM

Dual 850 double pumpers? - Mike Gray on Dec 24, 2008, 11:56 AM

Two 850's - David on Dec 24, 2008, 12:09 PM

Wow! only 850s? - Jim on Dec 24, 2008, 1:41 PM

Sure, but he was concerned about.. - DaleP on Dec 24, 2008, 4:18 PM

Yesterdays junk... - David on Dec 24, 2008, 4:51 PM

It's just that your motor is - DaleP on Dec 24, 2008, 6:14 PM

Simply fun factor - David on Dec 24, 2008, 8:17 PM

850's? - Tom P on Dec 24, 2008, 9:03 PM

Sideways? - David on Dec 25, 2008, 4:07 PM

As far as I know, 850's won't fit - DaleP on Dec 25, 2008, 6:48 PM

Well, no matter - Don Ragan on Dec 26, 2008, 9:03 AM

Fix suggestions needed View Thread - Paul W on Dec 24, 2008, 5:22 AM

rivits - Fousty on Dec 24, 2008, 5:55 AM

how about a stainless steel rivit - mike saathoff on Dec 24, 2008, 6:41 AM

Paul, most of after market suppliers have repair kits. I - Inthegarge on Dec 24, 2008, 7:05 AM

I replaced these on my '66 Fairlane recently - Steve on Dec 24, 2008, 9:56 AM

Thanks Guys - Anonymous on Dec 24, 2008, 1:45 PM

Radiator for F100 / 428 4X4? View Thread - Kerry Johnson on Dec 24, 2008, 5:08 AM

Re: Radiator for F100 / 428 4X4? - Pete on Dec 24, 2008, 6:09 AM

I have one from before the rebuild - Kerry Johnson on Dec 24, 2008, 7:05 AM

Re: Radiator for F100 / 428 4X4? - Bill Holm on Dec 24, 2008, 7:53 AM

Good point Bill - Kerry Johnson on Dec 24, 2008, 8:04 AM

2 - 3/8" rows - Kerry Johnson on Dec 24, 2008, 1:12 PM

Thats just a stock style radiator dont bother - Ross on Dec 24, 2008, 7:53 PM

Thanks Ross! - Kerry Johnson on Dec 24, 2008, 8:06 PM

If thats the monster top tank one, it'll work great - Ross on Dec 24, 2008, 9:23 PM

'73<79 core supports... - Dr. Mabuse on Dec 25, 2008, 10:19 AM

Good to know - Ross on Dec 25, 2008, 1:35 PM

same thing with the '67-72?...n/m - Dr. Mabuse on Dec 25, 2008, 2:44 PM

68-72 arent all the same - Ross on Dec 25, 2008, 7:42 PM

i have - Tim Mc on Dec 24, 2008, 8:37 AM

I have one of those... - Kerry Johnson on Dec 24, 2008, 8:41 AM

Kerry, I have an aluminum radiator such as you describe - Gary B on Dec 24, 2008, 12:03 PM

Re: Radiator for F100 / 428 4X4? - r on Dec 24, 2008, 9:01 AM

I also have an F100 with a 428 . . . - Pete's Ponies on Dec 24, 2008, 1:14 PM

I run a stocker... - BattlestarGalactic on Dec 24, 2008, 8:37 PM

O/T but Ford. Does anyone know a good transmission View Thread - Ray Hillebrand on Dec 23, 2008, 9:18 PM

i don't know but I have never liked - Tom J. on Dec 23, 2008, 9:33 PM

Re: i don't know but I have never liked - Ray Hillebrand on Dec 23, 2008, 9:48 PM

should have called the "BIG" office - e. philpott on Dec 24, 2008, 7:17 AM

Re: should have called the "BIG" office - Ray Hillebrand on Dec 24, 2008, 10:37 AM

Re: O/T but Ford. Does anyone know a good transmission - SnakeOnWheels on Dec 23, 2008, 9:47 PM

trade group - Don on Dec 24, 2008, 4:16 AM

Good advice, I'll second that, I've used my local ATRA shop and was 100% satisfied - TonyS. on Dec 24, 2008, 5:26 AM

Re: Good advice, I'll second that, I've used my local ATRA shop and was 100% satisfied - e. philpott on Dec 24, 2008, 7:13 AM

If he's parked in Pecos, that's just a lil bit down the road from Midland/Odessa - D hearne on Dec 24, 2008, 7:37 PM

Yep, he said it will be towed to Odessa on Monday. - Ray Hillebrand on Dec 24, 2008, 9:13 PM

IMO, the Ford dealer is first choice. They may charge more but they're trained.......... - Rod C on Dec 25, 2008, 5:56 AM

Ford rebuilt?... - Dr. Mabuse on Dec 25, 2008, 10:07 AM

Re: Ford rebuilt?... - Dennis on Dec 25, 2008, 10:40 AM

AAMCo, sucks and has Sucked for a long time...Rip-off claims are common - Beoweolf on Dec 26, 2008, 7:29 AM

Lifting my '63 Galaxie View Thread - Michael on Dec 23, 2008, 8:42 PM

Re: Lifting my '63 Galaxie - Ray Hillebrand on Dec 23, 2008, 9:19 PM

Back in '64.... - KenS on Dec 23, 2008, 10:02 PM

springs - Todd Wimberly on Dec 24, 2008, 4:00 AM

Mine has spacers between the upper ball-joint and A-frame. It's an early......... - Rod C on Dec 24, 2008, 4:40 AM

Hey ROD, - john vermeersch on Dec 24, 2008, 8:38 AM

I hear ya John, you must admit, my car starts off at a higher 'elevation'. Even without.., - Rod C on Dec 24, 2008, 8:58 AM

Re: Mine has spacers between the upper ball-joint and A-frame. It's an early......... - Michael on Dec 25, 2008, 9:51 AM

Yes, thanks. That's my LWG, on the right, that has the spacers......n/m - Rod C on Dec 25, 2008, 7:21 PM

I used '63 springs & spacers on my '64 - Bill Troth on Dec 24, 2008, 4:46 AM

coil springs - Jim V on Dec 24, 2008, 5:16 AM

raising? - Tom P on Dec 24, 2008, 11:01 AM

Oh come on - Michael on Dec 25, 2008, 9:57 AM

Performance demands a forward rake... - Dr. Mabuse on Dec 25, 2008, 10:13 AM

427 springs.... - W.KLINE on Dec 24, 2008, 12:15 PM

Believe they are Moog #874 - StarlinerRon on Dec 24, 2008, 6:56 PM

Check with the new Prez.......... - Tony P. on Dec 24, 2008, 12:43 PM

If you can't get the springs locally...... - W.KLINE on Dec 25, 2008, 2:00 PM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!