332-428 Ford FE Engine Forum (Page 3 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 21 Visitors 68FBMustang, 20 guests

Not logged in | Login | Create Account

Post Now!

Poll on oil cosumption, members who are running HV pumps & Ersons View Thread - Craig Mitchell on Dec 23, 2008, 7:52 PM

Craig,........... - Blair Patrick on Dec 23, 2008, 8:50 PM

Blair, no chance of clogged returns, - Craig Mitchell on Dec 23, 2008, 9:05 PM

Re: Blair, no chance of clogged returns, - steve on Dec 23, 2008, 9:10 PM

Re: Poll on oil cosumption, members who are running HV pumps & Ersons - Ray Hillebrand on Dec 23, 2008, 9:23 PM

I am thinking the caged needle bearings on Ersons........ - Craig Mitchell on Dec 24, 2008, 5:59 AM

Oil consumption usually has smoky symptoms. - Dave Shoe on Dec 23, 2008, 9:53 PM

Dave, it smokes when revving............. - Craig Mitchell on Dec 24, 2008, 6:03 AM

Oil consumption - Keith Craft on Dec 23, 2008, 11:04 PM

Keith, did this problem show up only on engines ..... - Craig Mitchell on Dec 24, 2008, 6:08 AM

Teflon Seals - Bart on Dec 23, 2008, 11:13 PM

Bart, I will look into the Viton seals. Thanks, n/m - Craig Mitchell on Dec 24, 2008, 6:19 AM

Re: Poll on oil cosumption, members who are running HV pumps & Ersons - 68xl on Dec 24, 2008, 12:08 AM

68XL, I am definitly going back with standard file fit rings.......... - Craig Mitchell on Dec 24, 2008, 6:25 AM

Intake ports appeared dry................. - Craig Mitchell on Dec 24, 2008, 5:54 AM

I have that set up... - patrickt_FE on Dec 24, 2008, 6:03 AM

I'm wondering about the guides.............. - Blair Patrick on Dec 24, 2008, 12:41 PM

Oil consumption - Chris on Dec 24, 2008, 2:13 PM

ahahhhhhhhhhha - Harry H on Dec 24, 2008, 2:34 PM

Excessive oil on valve springs - Paul H on Dec 24, 2008, 4:12 PM

Ersons bleed oil like crazy.. - DaleP on Dec 24, 2008, 6:37 PM

Re: Ersons bleed oil like crazy.. - afret on Dec 24, 2008, 6:48 PM

Seems like.............. - Blair Patrick on Dec 24, 2008, 7:18 PM

Yup, I've had a low oil flow problem ever since I put - DaleP on Dec 25, 2008, 12:04 AM

Paul,you got any pics of your modified tins........... - Craig Mitchell on Dec 24, 2008, 9:42 PM

Tins - Paul H on Dec 25, 2008, 11:38 AM

tin photos - paul on Dec 25, 2008, 2:07 PM

Thanks Paul, - Craig Mitchell on Dec 25, 2008, 6:31 PM

Not sure - Barry R on Dec 25, 2008, 12:27 AM

Barry, I've looked into that as well, with - DaleP on Dec 25, 2008, 2:12 AM

Machining a groove in the #2 & #4 cam journal bores..... - Ted E. on Dec 25, 2008, 7:25 AM

Interesting idea Ted, also interesting that - DaleP on Dec 25, 2008, 2:59 PM

Hey Dale............... - Blair Patrick on Dec 25, 2008, 3:02 PM

Done that as well Blair.. - DaleP on Dec 25, 2008, 6:49 PM

Re: Poll on oil cosumption, members who are running HV pumps & Ersons - Charles Logsdon on Dec 26, 2008, 12:18 AM

ot/ earlier post for new Mustang Gt's View Thread - Anonymous on Dec 23, 2008, 7:48 PM

Probably Chris Whitney................ - Blair Patrick on Dec 23, 2008, 8:23 PM

Re: ot/ earlier post for new Mustang Gt's - Jeff Tepper on Dec 24, 2008, 10:54 AM

Re: ot/ earlier post for new Mustang Gt's - kc on Dec 24, 2008, 2:09 PM

Dyno plots for 427 Mule View Thread - Jay Brown on Dec 23, 2008, 6:55 PM

Fascinating....where would you shift? - Tim O'Connor on Dec 23, 2008, 7:41 PM

Looks like................. - Blair Patrick on Dec 23, 2008, 7:48 PM

Shift where ever you want!!! True Big Block Power Curve - Pippin on Dec 23, 2008, 9:43 PM

Header pipes - Phil63 on Dec 23, 2008, 8:01 PM

Dyno headers - Jay Brown on Dec 23, 2008, 8:53 PM

Jay, that's cool................. - Blair Patrick on Dec 23, 2008, 8:10 PM

Fuel, flow numbers, etc. - Jay Brown on Dec 23, 2008, 8:44 PM

Merry Christmas - Blair Patrick on Dec 23, 2008, 8:54 PM

Those are great dyno numbers - Michael Conner on Dec 24, 2008, 3:22 AM

Jay you got me wondering on your three Plastic Filter Vessels mounted on wall - qikBBstang on Dec 24, 2008, 9:05 PM

Bonneville salt flats View Thread - mike saathoff on Dec 23, 2008, 6:18 PM

Been there - Jim on Dec 23, 2008, 6:36 PM

Don't do it!!! - Gary on Dec 23, 2008, 6:36 PM

salt - mike saathoff on Dec 23, 2008, 6:50 PM

Where do you live? It's.... - KenS on Dec 23, 2008, 7:10 PM

I'm far away - mike saathoff on Dec 23, 2008, 7:14 PM

That must mean.... - KenS on Dec 23, 2008, 8:35 PM

Been the past three years.... - Rex Carter on Dec 23, 2008, 7:25 PM

took the wife's "modified" suburban there........ - johannarich. on Dec 23, 2008, 9:07 PM

You NEED to go there. - Tom P on Dec 23, 2008, 10:45 PM

M/T's 1969 Mustang at Bonneville...... - Bob on Dec 24, 2008, 6:17 AM

Can't wait, - mike saathoff on Dec 24, 2008, 6:36 AM

I'd think it would be easier to "prepare" the undercarrage before "salting" it - qikBBstang on Dec 25, 2008, 3:02 AM

Bonneville - Jim V on Dec 24, 2008, 6:35 AM

Charlotte - mike saathoff on Dec 24, 2008, 8:02 AM

As if Ford didn't have enough problems: roof collapse at Rouge View Thread - Bob on Dec 23, 2008, 5:41 PM

Has nothing to do with Ford - Hawkrod on Dec 23, 2008, 6:04 PM

Re: Has nothing to do with Ford - Ray Hillebrand on Dec 23, 2008, 9:27 PM

Ford had divested itself in the steel-making business long ago. Rouge Steel....... - Rod C on Dec 24, 2008, 5:09 AM

Rouge Plant - Goose on Dec 24, 2008, 6:36 AM

Goose, it 'seemed like miles' because.... - KenS on Dec 24, 2008, 9:23 AM

Huge - Tom P on Dec 24, 2008, 10:56 AM

Pulley's, Pulley's and more Pulley questions View Thread - 7TCatvert on Dec 23, 2008, 4:40 PM

I don't think you can use the old pump and you definitely can't use the pulley - Hawkrod on Dec 23, 2008, 5:20 PM

Just curious... - Tommy-T on Dec 23, 2008, 6:04 PM

'cause you can! N/M - Hawkrod on Dec 23, 2008, 6:05 PM

found the answer with a web site - 7TCatvert on Dec 25, 2008, 2:18 PM

All you had to do was ask - Hawkrod on Dec 25, 2008, 4:19 PM

o/t any of you guys ever raced at pikes peak, there is some great pics View Thread - Wayne (oz) on Dec 23, 2008, 4:04 PM

They're in the process/considering of paving it to the top.....n/m - Rod C on Dec 23, 2008, 6:27 PM

I did drive up it in my 68 F250 Camper Special - John Butruce on Dec 23, 2008, 6:33 PM

Re: o/t any of you guys ever raced at pikes peak, there is some great pics - Dale Cecil on Dec 23, 2008, 7:06 PM

Cool Pikes Peak racing video - Alan Casida on Dec 23, 2008, 9:37 PM

Anyone have internal pics of the 63 Indy 260 push rod engine, Henry Floored maybe? n/m View Thread - Gary Blair on Dec 23, 2008, 3:32 PM

They..... - Bob on Dec 23, 2008, 4:26 PM

I'm look'in through my pics...... - HenryFloored on Dec 23, 2008, 4:51 PM

that one is different - Tom P on Dec 23, 2008, 11:04 PM

Thanks Henry. Specifically I'm looking for the valve train. - Gary Blair on Dec 24, 2008, 6:29 AM

Henry, there's a lot of technology in that little engine - Gary Blair on Dec 24, 2008, 6:35 AM

O/T Roof Damage and tree work update, etc.... View Thread - Hawkrod on Dec 23, 2008, 2:06 PM

Glad it came out okay, or as much as did - Gary B on Dec 23, 2008, 2:24 PM

Thankful - Goose on Dec 23, 2008, 3:45 PM

I Dig The Peanuts Christmas Display Hawk - Wreckless Warren on Dec 23, 2008, 3:50 PM

O/T What do I need to do to regain title to a car I sold? View Thread - Cliff Harmon on Dec 23, 2008, 1:28 PM

Not a specific answer, but - 1960 Town Vic on Dec 23, 2008, 1:53 PM

reclaiming car - Mark A. Spatz on Dec 23, 2008, 1:54 PM

Re: O/T What do I need to do to regain title to a car I sold? - Ray Hillebrand on Dec 23, 2008, 2:06 PM

Hawkrod should weight in on this? Here is my input... - Pippin on Dec 23, 2008, 2:07 PM

Why not just call him right now? - Kim in Oregon on Dec 23, 2008, 3:24 PM

Cliff don't wait...call the guy - Dave Walters on Dec 23, 2008, 3:54 PM

Re: O/T What do I need to do to regain title to a car I sold? - e. philpott on Dec 23, 2008, 4:50 PM

As these guys noted, it really is not yours but..... - Hawkrod on Dec 23, 2008, 5:23 PM

My favourite three words from law school... - EricD on Dec 23, 2008, 8:11 PM

Texas Thunder 63 1/2 Galaxie....just rec'd my autographed View Thread - Scrap Iron on Dec 23, 2008, 12:34 PM

John........I am as - Mark Artis on Dec 23, 2008, 6:20 PM

I want one - Jim on Dec 23, 2008, 6:40 PM

just drop me an email... - Mark Artis on Dec 23, 2008, 7:51 PM

Autographs - Terry on Dec 24, 2008, 9:48 AM

Little Green bottles? - Mark Artis on Dec 24, 2008, 4:13 PM

New MEL Engine Forum View Thread - Theo on Dec 23, 2008, 10:53 AM

Already signed up.... - RJP on Dec 23, 2008, 11:53 AM

WowI had to go to your site to see what aMEL is. - Bobby Spears on Dec 23, 2008, 12:18 PM

wow i had to go to this site - jack b fuche on Dec 23, 2008, 5:03 PM

Great to hear from you Theo - - EricD on Dec 23, 2008, 8:14 PM

Re: Great to hear from you Theo - - Theo on Dec 24, 2008, 2:19 AM

Re: Great to hear from you Theo - - Theo on Dec 24, 2008, 3:02 PM

Block cracks View Thread - Paul on Dec 23, 2008, 10:50 AM

cracked block - DYNO427 on Dec 23, 2008, 11:48 AM

Sorry to say.... - KenS on Dec 23, 2008, 11:57 AM

A 390 block should be easy to find in Houston - Royce on Dec 23, 2008, 12:13 PM

or 360 - Tom P on Dec 23, 2008, 12:27 PM

Hey Paul, dablack ia member here and is close to Houston, he had 2 390's... - winr1 on Dec 23, 2008, 1:18 PM

Crack - Paul on Dec 23, 2008, 2:28 PM

I'll be gently squeezing my parts View Thread - FElony on Dec 23, 2008, 10:40 AM

I'm under the.... - KenS on Dec 23, 2008, 11:19 AM

Nope - FElony on Dec 23, 2008, 11:24 AM

I got some through ... - Mike Gaffney on Dec 23, 2008, 11:32 AM

Harbor Freight - FElony on Dec 23, 2008, 3:05 PM

Re: Harbor Freight - Scode67FB on Dec 23, 2008, 5:54 PM

No - FElony on Dec 23, 2008, 7:04 PM

chingie - Anonymous on Dec 23, 2008, 12:42 PM

Re: chingie - FElony on Dec 23, 2008, 2:21 PM

Try contacting Dake, info below.......I didn't see anything on their site...... - Rod C on Dec 23, 2008, 6:41 PM

short pieces of pipe... - Dr. Mabuse on Dec 25, 2008, 9:37 AM

Thanks for the extra tips - FElony on Dec 25, 2008, 3:07 PM

Pressed Pins? View Thread - FElony on Dec 23, 2008, 10:36 AM

Not me! From.... - KenS on Dec 23, 2008, 11:11 AM

I have had 352, 360, 390, ect and have seen nary a pressed FE pin... - winr1 on Dec 23, 2008, 11:48 AM

OK, Look At These - FElony on Dec 23, 2008, 2:32 PM

I posted on this a while back - Bob Hasty on Dec 23, 2008, 2:58 PM

Do you remember the - FElony on Dec 23, 2008, 3:08 PM

FE Pressed pins - Kam on Dec 23, 2008, 3:53 PM

I used a caliper and caught the inside edges of a C7 rods pin bore..... - winr1 on Dec 23, 2008, 4:30 PM

Pressed pin rebuilder pistons - Barry R on Dec 23, 2008, 6:21 PM

Now I'm Starting To Wonder - FElony on Dec 24, 2008, 10:16 AM

He's a scavenger - Barry R on Dec 25, 2008, 3:50 AM

I'm sure you're right - FElony on Dec 25, 2008, 9:37 AM

Press fit FE pins - George on Dec 25, 2008, 4:36 PM

Sachs / Rhino clutches View Thread - Tom V on Dec 23, 2008, 10:20 AM

Sachs, Rhino, and Valeo all make stock replacement clutches.... - Brent on Dec 23, 2008, 11:28 AM

SOHC 1965 Stang up for January '09 auction: View Thread - Bob on Dec 23, 2008, 9:16 AM

Direct Link - john krebs on Dec 23, 2008, 10:56 AM

AFX Cammer Stang - Rory McNeil on Dec 23, 2008, 11:45 AM

AFX'er at the drags - Tom P on Dec 23, 2008, 11:55 AM

the DST prototype was disassembled by Lee Holman..... ?? - Anonymous on Dec 23, 2008, 1:18 PM

Re: the DST prototype was disassembled by Lee Holman..... ?? - Dennis on Dec 23, 2008, 5:59 PM

Dennis, maybe it was Rick Kirk. When I towed my LWG into the Hyatt he asked me if it was.. - Rod C on Dec 23, 2008, 6:51 PM

No, I wouldn't ever forget his name. Anyway, I just remembered ... - Dennis on Dec 23, 2008, 9:57 PM

427 sideoiler block info (H?) View Thread - steve bava on Dec 23, 2008, 8:37 AM

Market value - Royce on Dec 23, 2008, 8:49 AM

Thanks Royce, please look again - steve bava on Dec 23, 2008, 9:06 AM

The painted "H"? - Royce on Dec 23, 2008, 9:28 AM

for the price of two Genesis blocks... - Tom P on Dec 23, 2008, 12:03 PM

+1...stupid, stupid, STUPID!...n/m - Dr. Mabuse on Dec 23, 2008, 12:06 PM

Looks like shill bidding - Royce on Dec 23, 2008, 12:15 PM

Yep, wanna bet the second highest bidder got a second chance offer?? nm - Ray Hillebrand on Dec 23, 2008, 1:04 PM

Sure are a lot of ebayers with multiple IDs scamming FE stuff. - Dave Shoe on Dec 23, 2008, 4:03 PM

I noticed the savvy buyers who stopped bidding at $2,500..........n/m - Rod C on Dec 23, 2008, 6:55 PM

Not a bore size marking. - Dave Shoe on Dec 23, 2008, 3:56 PM

I assumed there was a EFGH - Royce on Dec 24, 2008, 12:46 PM

Re: 427 sideoiler block info (H?) - DEANs427 on Dec 23, 2008, 4:46 PM

427 side oiler block info(H) - jack b fuche on Dec 23, 2008, 5:24 PM

yep, jack - steve bava on Dec 24, 2008, 8:09 AM

yep jack - jack b fuche on Dec 25, 2008, 6:10 PM

Thanks to everyone, Rex Hutchison Racing Engines, Sacramento??? - steve bava on Dec 24, 2008, 8:17 AM

FE for '66 Fairlane Convt. - Questions View Thread - Scott on Dec 23, 2008, 8:18 AM

C8 or D2 heads - Jason Engle on Dec 23, 2008, 9:21 AM

Scott, where are you? - Rory McNeil on Dec 23, 2008, 10:19 AM

Location - Scott on Dec 23, 2008, 10:41 AM

BB swap into 65 Fairlane View Thread - sixty3 on Dec 23, 2008, 5:53 AM

FYI, T-Bolts were modified at DST, in Dearborn.....n/m - Rod C on Dec 23, 2008, 6:10 AM

Chassis mods: - Bob on Dec 23, 2008, 7:41 AM

Re: BB swap into 65 Fairlane - Dennis on Dec 23, 2008, 5:09 PM

need info???? View Thread - gopher on Dec 22, 2008, 10:51 PM

Cabin Fever View Thread - DG on Dec 22, 2008, 10:02 PM

Hey Doug, I'm sure we can locate shop space, but - DaleP on Dec 22, 2008, 10:24 PM

Winter - Doug on Dec 23, 2008, 7:31 AM

Hey Doug - Cliff Harmon on Dec 23, 2008, 8:32 AM

Reply - Doug on Dec 23, 2008, 6:15 PM

Merry Xmas - Gord Bradley on Dec 23, 2008, 5:51 AM

HO HO HO - Doug on Dec 23, 2008, 7:37 AM

Not that cold today - Gary B on Dec 23, 2008, 2:27 PM

Stark Hickey Fairlane View Thread - tony427s on Dec 22, 2008, 7:18 PM

Driver? - SSdynosaur on Dec 22, 2008, 9:07 PM

Any photos..... - Earl on Dec 22, 2008, 9:15 PM

Pics? - SSdynosaur on Dec 22, 2008, 10:37 PM

I have one.... - Earl on Dec 23, 2008, 6:35 AM

Didn't Stark sponsor... - Mark on Dec 23, 2008, 5:50 AM

was.... - Bob on Dec 23, 2008, 7:23 AM

Yeah - I've got pics of the Paul Harvey/Platt 67 on my wall... - Mark on Dec 23, 2008, 8:10 AM

Bill Allie Jr. - pmw on Dec 23, 2008, 8:12 AM

No pic but Jack Roush..... - Bob on Dec 23, 2008, 8:22 AM

Peter - Earl on Dec 23, 2008, 2:04 PM

restored , I meant freshened - pmw on Dec 24, 2008, 6:50 AM

O/T 4" grinder wheels View Thread - steve meyer on Dec 22, 2008, 7:05 PM

Like these? - Tbolt on Dec 22, 2008, 7:24 PM

Thanks for the tip, Any suggestion on cupped wire wheels? - Gary B on Dec 22, 2008, 7:25 PM

LOL ! Gary.. Been there and - DaleP on Dec 22, 2008, 8:26 PM

Gary, are you using straight or twisted/knoted wire cups?... - Larry Hampton on Dec 23, 2008, 6:22 AM

I'll try the knotted, but I thought they might be too rough - Anonymous on Dec 23, 2008, 1:58 PM

Back in '87 I stripped my '67 Mustang 'vert with a Makita and a knotted wire brush... - Larry Hampton on Dec 24, 2008, 5:33 AM

Totally disagree... - Josh on Dec 22, 2008, 8:56 PM

same here - Tom P on Dec 22, 2008, 10:59 PM

+3...n/m - Dr. Mabuse on Dec 23, 2008, 4:09 AM

Try Scotchbrite stripping disc for paint removal.. - Neville (Australia) on Dec 22, 2008, 11:58 PM

knotted/twisted wire cups have their place... - Dr. Mabuse on Dec 23, 2008, 4:11 AM

wire brush - Tom P on Dec 23, 2008, 11:47 AM

I'll second that... - Josh on Dec 23, 2008, 3:51 PM

Scary stuff, be carefull guys View Thread - John on Dec 22, 2008, 6:57 PM

Spring loaded or any pressures - Tim O'Connor on Dec 22, 2008, 7:12 PM

Not THAT many Fords in it,but... View Thread - Cobrabill on Dec 22, 2008, 6:39 PM

Lots and lots of great old Fords here: - Bob on Dec 23, 2008, 4:48 PM

Guess the HP and Torque... View Thread - Jay Brown on Dec 22, 2008, 6:08 PM

I'm jumping in head first and saying - DaleP on Dec 22, 2008, 6:19 PM

My Guess - Jim W on Dec 22, 2008, 6:24 PM

LOL! Sorry... - Jay Brown on Dec 22, 2008, 6:36 PM

555 - Bob Sprowl on Dec 22, 2008, 6:24 PM

585 H.P. .... - Mike Gaffney on Dec 22, 2008, 6:35 PM

Jay, you are one busy guy... - Mark on Dec 22, 2008, 6:35 PM

Re: Guess the HP and Torque... - Anonymous on Dec 22, 2008, 6:37 PM

I'll guess higher like 626 - XR7 on Dec 22, 2008, 6:41 PM

629 HP at 6750 RPM, 568 ft/lbs @5200 - Gary on Dec 22, 2008, 6:48 PM

I'm with Gary - William Conley on Dec 22, 2008, 7:43 PM

555 Hp 495 TQ @ 6500 - Tim O'Connor on Dec 22, 2008, 6:55 PM

608 HP / 576 lbft @ 6700 - Joe D. Craine on Dec 22, 2008, 6:57 PM

Just a guess - Rob on Dec 22, 2008, 7:07 PM

618@6700, 564 n/m - Barry R on Dec 22, 2008, 7:24 PM

606 hp - steve meyer on Dec 22, 2008, 7:27 PM

HMMMMMM - Shane Jarrell on Dec 22, 2008, 7:31 PM

665 HP @ 6500 550 TQ @ 5500 - Richard Dinsen on Dec 22, 2008, 7:38 PM

580@6700, 525@5200 - doug smith on Dec 22, 2008, 8:03 PM

570hp@ 6500, 540ftlbs@5200 - Aaron J. Benham on Dec 22, 2008, 8:04 PM

And here are the results... - Jay Brown on Dec 22, 2008, 8:25 PM

Posted late, had to play retriever ball first. Cam advance? - WerbyFord on Dec 22, 2008, 8:41 PM

4 degrees advanced, per the Comp recommendation... - Jay Brown on Dec 22, 2008, 8:53 PM

Did I hear Webers ?? - 68GT500 on Dec 23, 2008, 12:16 AM

Right... - Jay Brown on Dec 23, 2008, 5:43 AM

Jay, have you.... - KenS on Dec 23, 2008, 12:14 PM

Never seen a sidedraft manifold for an FE... - Jay Brown on Dec 23, 2008, 12:24 PM

That is exactly the Manifold I have. - 68GT500 on Dec 23, 2008, 12:33 PM

Here are some of the specs on my Weber setup... - Jay Brown on Dec 23, 2008, 4:42 PM

Weber Tuning - 68GT500 on Dec 24, 2008, 2:15 AM

Email - Jay Brown on Dec 24, 2008, 5:24 AM

Jay, with the webers make sure you run large enough carbs. 51mm chokes are needed with a - Mike on Dec 23, 2008, 5:33 AM

48 IDAs are the only ones available... - Jay Brown on Dec 23, 2008, 5:47 AM

Berg makes 58mm IDA's, but I guess the issue is where can you get a set to borrow. - Mike on Dec 23, 2008, 6:26 AM

BTW, if you do use 58's, you should really run HR heads, as the - Mike on Dec 23, 2008, 6:45 AM

Didn't see the carbs... - Jay Brown on Dec 23, 2008, 6:54 AM

The Berg 58IDA's have the same bolt pattern as the 48IDA, but - Mike on Dec 23, 2008, 7:00 AM

Try this: http://www.geneberg.com/product_info.php?cPath=2841&products_id=861 - Mike on Dec 23, 2008, 7:09 AM

Sure enough... - Jay Brown on Dec 23, 2008, 7:38 AM

even just making 51's... - Tom P on Dec 23, 2008, 12:11 PM

good deal!... "MSRP Price: $1,708.85"...n/m - Dr. Mabuse on Dec 23, 2008, 12:13 PM

Jay that's great! A manifold suggestion...... - Royce on Dec 23, 2008, 6:14 AM

Head Comparo - Jay Brown on Dec 23, 2008, 6:29 AM

Francis needs to get on the stick - Royce on Dec 23, 2008, 7:10 AM

MR BT heads - Joe D. Craine on Dec 23, 2008, 7:15 AM

Thanks... - Jay Brown on Dec 23, 2008, 7:34 AM

Good start - Joe D. Craine on Dec 23, 2008, 7:03 AM

Something for the neanderthals - Royce Brechler on Dec 23, 2008, 7:07 AM

That thing will be a turd... - Jay Brown on Dec 23, 2008, 7:19 AM

Turd??? - Royce Brechler on Dec 23, 2008, 9:08 AM

LOL! - Jay Brown on Dec 23, 2008, 9:48 AM

CFM and BSFC numbers? - Joel on Dec 23, 2008, 11:52 AM

BSFC at torque peak was .451, Max cfm at 7000 RPM was 770 n/m - Jay Brown on Dec 23, 2008, 6:48 PM

Torq 511 at 4900 Power 559 at 6300 - WerbyFord on Dec 22, 2008, 8:37 PM

The... - Bob on Dec 23, 2008, 7:49 AM

wouldn't you want a larger bearing journal on the crank - Kyle on Dec 22, 2008, 10:42 PM

A larger diameter has higher surface speed - Mario428 on Dec 23, 2008, 2:43 AM

Sounds like a sweet engine, put a POS on it ,is it for sale? - Bill Ballinger on Dec 23, 2008, 10:21 AM

Sorry Bill... - Jay Brown on Dec 23, 2008, 10:51 AM

Jay, to add to my Weber.... - KenS on Dec 23, 2008, 12:44 PM

Jay, It might be just me but...... - Morgan on Dec 23, 2008, 8:54 PM

flywheel View Thread - John on Dec 22, 2008, 5:31 PM

184 tooth... 11" clutch - XR7 on Dec 22, 2008, 6:48 PM

First test and tune for the Mustang (Long) View Thread - George Vega on Dec 22, 2008, 4:50 PM

wow, how about pics ? - mike saathoff on Dec 22, 2008, 4:58 PM

Re: wow, how about pics ? - George Vega on Dec 22, 2008, 5:05 PM

paint or no paint, yes please, - mike saathoff on Dec 22, 2008, 5:12 PM

Link to Pics - George Vega on Dec 22, 2008, 7:20 PM

Re: First test and tune for the Mustang (Long) - Jody Aberts on Dec 22, 2008, 6:16 PM

What are you using for a scoop George? - DaleP on Dec 22, 2008, 6:49 PM

Re: What are you using for a scoop George? - George Vega on Dec 22, 2008, 7:30 PM

I don't think so Jody - George Vega on Dec 22, 2008, 7:25 PM

sounds like fun George... - XR7 on Dec 22, 2008, 6:57 PM

XR7 - George Vega on Dec 22, 2008, 7:35 PM

Nice to hear this stuff, consolation for shovelling snow! - Gary B on Dec 22, 2008, 7:33 PM

Re: Nice to hear this stuff, consolation for shovelling snow! - George Vega on Dec 22, 2008, 7:41 PM

I think that scoop is too low ... - DaleP on Dec 22, 2008, 8:44 PM

i agree. On my torino, i would watch the water drops roll up the hood and - Pippin on Dec 22, 2008, 8:54 PM

Boundary Layer - FElony on Dec 23, 2008, 11:20 AM

I run the same CJ scoop on my car - Brandon on Dec 23, 2008, 2:29 PM

Taped off scoop. - Rory McNeil on Dec 23, 2008, 8:36 PM

Makes Sense - FElony on Dec 24, 2008, 10:27 AM

George, I remember when the.... - KenS on Dec 22, 2008, 9:26 PM

I agree that the scoop is to low - George Vega on Dec 23, 2008, 2:29 AM

Boss=yes, shaker=no I agree. Try a manometer? - WerbyFord on Dec 23, 2008, 9:40 AM

Manometer - Tom P on Dec 23, 2008, 12:26 PM

I agree tom! N/M - George Vega on Dec 23, 2008, 3:14 PM

GEORGE hood scoops - gopher on Dec 24, 2008, 7:32 PM

Don't think so Gopher.. - DaleP on Dec 24, 2008, 11:59 PM

dale - gopher on Dec 25, 2008, 8:24 AM

Need opinions, Oil is puddled on intake valves...... View Thread - Craig Mitchell on Dec 22, 2008, 4:15 PM

PCV? - Wreckless Warren on Dec 22, 2008, 4:54 PM

Wreckless, it has a PCV..............nm - Craig Mitchell on Dec 22, 2008, 5:33 PM

What I Ment To Say Was Maybe It's Pulling Oil From The PCV - Wreckless Warren on Dec 22, 2008, 7:15 PM

I'm thinking the same thing. A few ideas.... - Royce on Dec 23, 2008, 7:15 AM

Lots of Low speed idling - Howie on Dec 22, 2008, 4:54 PM

Howie, I drive it like I stole it !!!!! nm - Craig Mitchell on Dec 22, 2008, 5:35 PM

One.... - Bob on Dec 22, 2008, 4:55 PM

oil consumption!!!! - gopher on Dec 22, 2008, 5:12 PM

Gopher, I did the same thing,.............. - Craig Mitchell on Dec 22, 2008, 5:58 PM

Bob, I will check these things......... - Craig Mitchell on Dec 22, 2008, 5:53 PM

Man does this sound familiar... - Dave Bickler on Dec 22, 2008, 6:14 PM

Guys, I been preachin forever........................ - RonW on Dec 22, 2008, 6:40 PM

Ron, I do hope you're right! - Bob on Dec 22, 2008, 7:15 PM

Aftermarket rockers - Harry H on Dec 22, 2008, 8:54 PM

Back in the.... - KenS on Dec 22, 2008, 9:36 PM

Harry, how many miles on your motor?.......n/m - RonW on Dec 23, 2008, 8:38 AM

H/V OIL PUMPS - gopher on Dec 22, 2008, 10:05 PM

always had hv pump - Harry H on Dec 22, 2008, 11:52 PM

n/m - Bob on Dec 23, 2008, 7:29 AM

One of the issues..... - Bob on Dec 23, 2008, 7:39 AM

not alot of miles - Harry H on Dec 23, 2008, 2:24 PM

Since..... - Bob on Dec 23, 2008, 4:52 PM

Re: not alot of miles - Anonymous on Dec 23, 2008, 5:10 PM

drip rails - Harry H on Dec 23, 2008, 6:55 PM

Slightly O/T Theo has a new MEL forum up View Thread - Hawkrod on Dec 22, 2008, 4:11 PM

Forum - 74ford on Dec 22, 2008, 4:22 PM

Excellent, thanks for the alert! - WerbyFord on Dec 22, 2008, 8:45 PM

Ebay FE conrods?? View Thread - Craig on Dec 22, 2008, 3:32 PM

Re: Ebay FE conrods?? - Richard Dinsen on Dec 22, 2008, 8:05 PM

Tired of sending your heat out the ventpipe? View Thread - Mike Burch on Dec 22, 2008, 3:14 PM

Electric Dryers only Please. - Mike Radke on Dec 22, 2008, 3:20 PM

My first thought..... - Bob on Dec 22, 2008, 3:45 PM

You know Mike - Howie on Dec 22, 2008, 4:47 PM

You would be very wrong about that... - Hawkrod on Dec 22, 2008, 9:14 PM

Doesn't a kit like that at Home Depot cost like $8? - Josh on Dec 22, 2008, 5:24 PM

when we bought our house.. - Mark on Dec 22, 2008, 5:56 PM

More... - Mike Burch on Dec 22, 2008, 6:11 PM

If your in ... - Mike Gaffney on Dec 22, 2008, 6:42 PM

Ours had a bucket with water... - Josh on Dec 22, 2008, 9:01 PM

I knew a guy ........ - Randy on Dec 22, 2008, 9:10 PM

Re: I knew a guy ........ - Phil63 on Dec 23, 2008, 7:47 PM

Don't know about that, an entire family just died last week... - Josh on Dec 23, 2008, 9:57 PM

Jay B---Dyno??? View Thread - Joe D. Craine on Dec 22, 2008, 2:30 PM

I'm gonna go out and do that right now! - Jay Brown on Dec 22, 2008, 3:46 PM

Don't let Al Gore know! - Richard Dinsen on Dec 22, 2008, 4:32 PM

Joe! Did you feel it down there?? - Jay Brown on Dec 22, 2008, 6:11 PM

Getting Warmer already! - Joe D. Craine on Dec 22, 2008, 6:45 PM

Cam ID View Thread - acman63 on Dec 22, 2008, 12:29 PM

Re: Cam ID - FElony on Dec 22, 2008, 3:32 PM

Measure the lobe lift to be sure - WerbyFord on Dec 22, 2008, 8:48 PM

Re: Cam ID - Scott Hollenbeck on Dec 23, 2008, 6:36 AM

Scott that is right - WerbyFord on Dec 23, 2008, 9:50 AM

My Source for the YA - FElony on Dec 23, 2008, 10:34 AM

Anybody know the factory spec for rocker shaft diameter? View Thread - Jay Brown on Dec 22, 2008, 11:40 AM

Stock Wedge Shaft - Howie on Dec 22, 2008, 12:03 PM

my '66 factory manual says 0.838- 0.839 - Richard Dinsen on Dec 22, 2008, 12:29 PM

That's Odd - Howie on Dec 22, 2008, 3:16 PM

My '71 manual says 0.839 to 0.840 also... - Richard Dinsen on Dec 22, 2008, 3:26 PM

Heavy duty shafts - Mike Gray on Dec 22, 2008, 1:50 PM

Precision Oil Pumps; see the links n/m - Jay Brown on Dec 22, 2008, 3:44 PM

'65 shop manual .8385-8395 - Bob C on Dec 22, 2008, 2:53 PM

Here is a manual page with the specs - Bill Ballinger on Dec 22, 2008, 3:13 PM

1958 Ford Shop manual - Bill Ballinger on Dec 22, 2008, 3:20 PM

Yup - John on Dec 22, 2008, 3:28 PM

Thanks for the info guys! - Jay Brown on Dec 22, 2008, 3:43 PM

Info - Lon Sheffer on Dec 22, 2008, 4:13 PM

Rocker ID is .8440" - .8425" - Royce on Dec 23, 2008, 11:27 AM

WOW that is some loose specs - Mario428 on Dec 23, 2008, 2:54 AM

just some wild thoughts. - 1960 Town Vic on Dec 23, 2008, 5:33 AM

Ford's "performance" clearance specs... - Dr. Mabuse on Dec 23, 2008, 12:36 PM

I chased my tail over loose rockers years ago - Bill Ballinger on Dec 23, 2008, 9:41 AM

O/T Don't worry our nations in "Good Hands"! View Thread - qikBBstang on Dec 22, 2008, 10:25 AM

watt iz rong, lookz goud tu mee.!! - mike s. on Dec 22, 2008, 10:30 AM

car 4 sell - Terry on Dec 22, 2008, 10:44 AM

Analysis - FElony on Dec 22, 2008, 10:58 AM

looks like hes texting to me n/m - Harry H on Dec 22, 2008, 12:15 PM

if he was talking - fordsel on Dec 22, 2008, 2:28 PM

pathetic - Goose on Dec 23, 2008, 8:59 AM

Auto bail out info you might like to read. View Thread - mike s. on Dec 22, 2008, 10:25 AM

Re: Auto bail out info you might like to read. - ford-boy on Dec 22, 2008, 11:06 AM

Re: Auto bail out info you might like to read. - Timothy on Dec 22, 2008, 11:46 AM

Thanks for the fact check - Jason Engle on Dec 22, 2008, 12:35 PM

dang, sorry guys, I just assumed it was fact. - mike s. on Dec 22, 2008, 12:53 PM

The rest of the world was very generous towards us after 9/11 - Royce on Dec 22, 2008, 1:51 PM

Royce, I believe your last comment about the UAW was uncalled for and totally............. - Rod C on Dec 23, 2008, 5:09 AM

Just a fair question Rod - Royce on Dec 23, 2008, 1:50 PM

We sent money to tsunami victims as well as other catastrophes as we have supported....... - Rod C on Dec 23, 2008, 7:09 PM

Re: dang, sorry guys, I just assumed it was fact. - Timothy on Dec 22, 2008, 2:20 PM

Last time I checked Audi and Porshe are owned and part of VW, That would - Scott on Dec 23, 2008, 5:27 PM

I'll be playing with my 9 inch View Thread - FElony on Dec 22, 2008, 10:23 AM

buy or build ? - mike s. on Dec 22, 2008, 10:28 AM

Post Pics - FElony on Dec 22, 2008, 11:02 AM

pics of my 9 inch holder - mike saathoff on Dec 22, 2008, 5:11 PM

Yours - FElony on Dec 23, 2008, 10:47 AM

9in Ford - mike on Dec 22, 2008, 11:29 AM

Found It - FElony on Dec 22, 2008, 2:24 PM

need help with vin # View Thread - creed on Dec 22, 2008, 9:53 AM

Re: VIN - Howie on Dec 22, 2008, 10:11 AM

thanks - creed on Dec 22, 2008, 11:25 AM

Need Help with Galaxy Parts Interchange View Thread - steve pearson on Dec 22, 2008, 9:50 AM

Parts - Terry on Dec 22, 2008, 10:56 AM

Hey what do you mean - 1960 Town Vic on Dec 22, 2008, 8:33 PM

Grab it now, while you still have the chance. You won't be sorry. - David F. on Dec 22, 2008, 6:08 PM

Can any of you Metallurgists explain where Forged Aluminum fits in the grand scheme of View Thread - qikBBstang on Dec 22, 2008, 8:49 AM

I dont think forging can take the fexure/tension compared to billet, - Pippin on Dec 22, 2008, 10:02 AM

Re: Can any of you Metallurgists explain where Forged Aluminum fits in the grand scheme of - Greg on Dec 22, 2008, 10:31 AM

i just read in my machinest handbook, - mike s. on Dec 22, 2008, 10:51 AM

that is just one strength variable with a part - Jason Engle on Dec 22, 2008, 12:42 PM

Forged Cast Billet - David Bonnell on Dec 22, 2008, 6:28 PM

Re: Forged Cast Billet - David Bonnell on Dec 22, 2008, 6:30 PM

Stiffness is the issue - Joe Burnett on Dec 22, 2008, 8:57 PM

Please note that.... - KenS on Dec 22, 2008, 9:59 PM

Very true - Joe Burnett on Dec 22, 2008, 10:21 PM

Ballionger and Conley, need to e-mail you.. View Thread - Theo on Dec 22, 2008, 5:45 AM

Email sent n/m - Bill Ballinger on Dec 22, 2008, 7:02 AM

Ditto (n/m) - William Conley on Dec 22, 2008, 8:28 AM

o/t 68 1/2 mustang hood scoop View Thread - ron b on Dec 22, 2008, 4:20 AM

The rear edge of the Scoop is......... - Smokin Joe on Dec 22, 2008, 6:43 AM

68 1/2 CJ - Fotti Don on Dec 22, 2008, 11:17 AM

thanks - ron b on Dec 22, 2008, 3:07 PM

O.T....hate to do this again but, tail light id needed View Thread - Tbolt on Dec 21, 2008, 8:33 PM

Toyota sites won't let you join 'cause they could smell the FE on your breath, LOL.....n/m - Rod C on Dec 22, 2008, 4:35 AM

Yeah, maybe I shouldn't have used "noricers" as my handle. nm - Tbolt on Dec 22, 2008, 6:57 AM

Re: O.T....hate to do this again but, tail light id needed - Jeff Tepper on Dec 22, 2008, 7:23 AM

Re: O.T....hate to do this again but, tail light id needed - Rory McNeil on Dec 22, 2008, 9:06 AM

Sasuki or other import? Dont look like a toyota ive seen. n/m - Pippin on Dec 22, 2008, 10:03 AM

ricer lights - Tom P on Dec 22, 2008, 11:25 AM

new pic added - Tbolt on Dec 22, 2008, 12:08 PM

a very Merry Christmas to all....it's a bit cold everywhere, but View Thread - Scrap Iron on Dec 21, 2008, 6:32 PM

Yes..Merry Christmas to all ..it is 45 F here..which is freezing ..I am part reptile.... - winr1 on Dec 21, 2008, 6:37 PM

DITTO - 427Howard on Dec 21, 2008, 8:07 PM

It is 5 degrees F here right now - here's a holiday egg nog recipe - Royce on Dec 21, 2008, 7:10 PM

Thanks Royce~ - Wes Adams Ford428CJ on Dec 21, 2008, 7:59 PM

Holiday Greetings to you as well. Currently -10 F in NE S.Dak., calling for -23F by... - David F. on Dec 21, 2008, 7:13 PM

7� here calling for 2� overnight, at least wind died down - Bill Balllinger on Dec 21, 2008, 7:24 PM

Oh come on now!!! This is what you do if its cold outside~ - Wes Adams Ford428CJ on Dec 21, 2008, 7:54 PM

Upper 20's forecast tonight for Altha, Florida metro area.......... - RonW on Dec 21, 2008, 8:15 PM

0 degrees here. And I'm gonna try Royces egg nog recipe nm - Ray Hillebrand on Dec 21, 2008, 10:24 PM

Merry Christmas ... - Mike Gaffney on Dec 21, 2008, 10:38 PM

Mike goes to Puerto Rico and all we get is a picture of a frog. TOM P help this...... - Rod C on Dec 22, 2008, 4:39 AM

OK !! OK !! ... - Mike Gaffney on Dec 22, 2008, 5:23 PM

Much better - Tom P on Dec 22, 2008, 5:37 PM

So Mike, does your wife know - DaleP on Dec 22, 2008, 6:35 PM

The critical eye of .... - Mike Gaffney on Dec 22, 2008, 6:45 PM

Muchos Grati...HEY, wait a minute, check the date........LOL. Thanks Mike, I can feel.. - Rod C on Dec 23, 2008, 7:20 AM

Cold? LOL Ive been wondering about my winter tomatoes ripening on vine when cold - qikBBstang on Dec 22, 2008, 12:25 AM

Put your green tomatoes in a brown - StarlinerRon on Dec 22, 2008, 6:03 PM

Merry Christmas! I Hope Santa Behaves At Royce's House This Year - Wreckless Warren on Dec 22, 2008, 6:28 AM

Merry Christmas - Fotti Don on Dec 22, 2008, 12:13 PM

Re: Merry Christmas - Posford on Dec 22, 2008, 2:57 PM

Mery freezing Xmas - Tom P on Dec 22, 2008, 5:43 PM

Don.. And my buddies still can't figure out - DaleP on Dec 22, 2008, 6:32 PM

Christmas - Fotti Don on Dec 23, 2008, 7:15 AM

Update on removing block plugs.... View Thread - Craig Mitchell on Dec 21, 2008, 6:08 PM

Block drain .... - Mike Gaffney on Dec 21, 2008, 6:29 PM

Thats pretty trick........... - Craig Mitchell on Dec 21, 2008, 8:11 PM

Craig............................. - RonW on Dec 21, 2008, 8:27 PM

here is what I did - XR7 on Dec 21, 2008, 8:51 PM

Whew that remote drain looks complex for how often it could get used - qikBBstang on Dec 22, 2008, 12:33 AM

Yeah, but - Evan Gaffney on Dec 22, 2008, 4:27 AM

Mike and Evan...that is SLICK! - Marty Haynes on Dec 22, 2008, 6:35 AM

NAPA has real nice quality combo Stainless Steel/Brass drain valves - qikBBstang on Dec 22, 2008, 7:42 AM

try marine - Don Ragan on Dec 23, 2008, 8:52 AM

Photobucket View Thread - 427Howard on Dec 21, 2008, 5:36 PM

Re: Photobucket - Rich Ferguson on Dec 21, 2008, 6:02 PM

OK,,still need help - 427Howard on Dec 21, 2008, 8:02 PM

go to your album - Harry H on Dec 21, 2008, 9:23 PM

Rear main mod............. View Thread - Craig Mitchell on Dec 21, 2008, 5:18 PM

Rear main mods - Wayne on Dec 21, 2008, 7:30 PM

I thought it was a problem on all FE's....... - Craig Mitchell on Dec 21, 2008, 8:09 PM

Rear main mods - SSdynosaur on Dec 21, 2008, 8:52 PM

Is that a stock windage tray, and............. - Craig Mitchell on Dec 21, 2008, 9:24 PM

Stock windage tray? - SSdynosaur on Dec 21, 2008, 9:31 PM

Another SOHC Engine Failure !!!! Warning View Thread - Doug Garifo on Dec 21, 2008, 3:06 PM

interesting - Tom P on Dec 21, 2008, 3:13 PM

Whose backing plate was it? - Jay Brown on Dec 21, 2008, 5:25 PM

Common side oiler newby mistake - Royce on Dec 21, 2008, 6:01 PM

Re: Common side oiler newby mistake - steve on Dec 21, 2008, 7:24 PM

More info for you. - Doug Garifo on Dec 21, 2008, 8:17 PM

Re: More info for you. - steve on Dec 21, 2008, 8:25 PM

Genesis blocks - Barry R on Dec 22, 2008, 5:30 AM

Lights - doug smith on Dec 22, 2008, 6:56 AM

Cammer ??? - Posford on Dec 22, 2008, 7:23 AM

another SOHC engine. - Bill Orrick on Dec 22, 2008, 5:56 PM

Bill are you still.... - KenS on Dec 23, 2008, 12:52 PM

yes Ken S chils & albert - Bill Orrick on Dec 23, 2008, 4:42 PM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!