Clevelands Forever!
351Cleveland.net

This forum is for the discussion of the US Ford 351 Cleveland, 351M (MODIFIED), 400 and Aussie 302C and 351C engines.

POST MESSAGE___ SEARCH___ CLASSIFIED ADS___ PHOTOS

USEFUL LINKS___ GUITAR AMPS___THE BENCH___MEMBERSHIP

The Cleveland Wiki NEW!

This forum requires membership for posting messages. Anyone can read, but you will have to be a member to post. For instructions on how to apply for membership, go here. It's easy and free!

Info on the New Tod Buttermore Cleveland Block

Visitors in this forum in the last 10 minutes: 5 Visitors
5 guests

Not logged in | Login | Create Account

Search "Engine Build Forum" Post now!

13.5 GPM View Thread - joe on Dec 23, 2008, 6:24 PM

13.5 GPM - ZZ28 on Dec 23, 2008, 8:50 PM

with no lifter bushings ? - joe on Dec 24, 2008, 10:12 AM

I've been thinking - cmf60 on Dec 25, 2008, 6:23 PM

ZZ28 is using a spur gear pump - joe on Dec 25, 2008, 7:23 PM

Interesting - cmf60 on Dec 25, 2008, 8:15 PM

Interesting - ZZ28 on Dec 26, 2008, 6:22 AM

I can see how the various exits would be appealing in the middle of the block - joe on Dec 26, 2008, 10:14 AM

right you are!! - ZZ28 on Dec 26, 2008, 11:03 AM

I'm glad - cmf60 on Dec 26, 2008, 1:00 PM

I wish I could give you a definitive answer - joe on Dec 26, 2008, 3:04 PM

Thanks for the answer Joe - cmf60 on Dec 26, 2008, 5:14 PM

I understand your doubts - joe on Dec 26, 2008, 6:09 PM

Re: I wish I could give you a definitive answer - lawrence coppola on Dec 26, 2008, 8:10 PM

Quote - cmf60 on Dec 26, 2008, 9:04 PM

Thank you some one with common sense - lawrence coppola on Dec 26, 2008, 9:31 PM

Re: I can see how the various exits would be appealing in the middle of the block - Adam on Dec 26, 2008, 3:12 PM

spur gear pump - ZZ28 on Dec 26, 2008, 6:32 AM

I've been thinking - ZZ28 on Dec 26, 2008, 6:21 AM

Re: I've been thinking - lawrence coppola on Dec 26, 2008, 4:29 PM

Re: I've been thinking - ZZ28 on Dec 26, 2008, 4:52 PM

Re: 13.5 GPM - lawrence coppola on Dec 24, 2008, 8:31 PM

Re: 13.5 GPM - ZZ28 on Dec 25, 2008, 9:35 AM

hard to swallow - lawrence coppola on Dec 25, 2008, 3:57 PM

going below .002 is tricky - joe on Dec 25, 2008, 5:48 PM

hard to swallow - ZZ28 on Dec 25, 2008, 8:44 PM

It would appear that we have pontiac to thank for these types of oil systems - joe on Dec 26, 2008, 10:24 AM

Pontiac oil systems - ZZ28 on Dec 26, 2008, 11:09 AM

there's an important point to be made here - joe on Dec 26, 2008, 3:06 PM

Re: 13.5 GPM - Anonymous on Dec 26, 2008, 2:02 PM

Re: 13.5 GPM - coupe3w on Dec 24, 2008, 7:06 AM

not early on - joe on Dec 24, 2008, 10:14 AM

over looked - lawrence coppola on Dec 26, 2008, 4:23 PM

I didn't necesarily overlook it - joe on Dec 26, 2008, 6:39 PM

cool - lawrence coppola on Dec 26, 2008, 7:23 PM

Interesting ! - joe on Dec 26, 2008, 7:46 PM

Just reading now.... but what about... - machstang70 on Dec 26, 2008, 6:45 PM

HTC - lawrence coppola on Dec 26, 2008, 7:29 PM

personally I'm lavish with the rods - joe on Dec 26, 2008, 8:05 PM

Re: 13.5 GPM - Anonymous on Dec 26, 2008, 8:07 PM

lateral thinking - lawrence coppola on Dec 26, 2008, 8:17 PM

Re: lateral thinking - clevochild on Dec 27, 2008, 1:38 AM

Re: lateral thinking - ZZ28 on Dec 27, 2008, 5:08 AM

Re: lateral thinking - Tony on Dec 27, 2008, 9:29 AM

Re: lateral thinking - ZZ28 on Dec 27, 2008, 3:53 PM

Re: lateral thinking - Tony on Dec 27, 2008, 10:38 PM

Re: lateral thinking - ZZ28 on Dec 28, 2008, 6:01 AM

be carefull - lawrence coppola on Dec 29, 2008, 2:38 AM

br careful - ZZ28 on Dec 29, 2008, 4:29 AM

Re: 13.5 GPM - Anonymous on Dec 27, 2008, 11:29 AM

There are many - cmf60 on Dec 27, 2008, 3:06 PM

Re: There are many - lawrence coppola on Dec 27, 2008, 3:26 PM

Re: There are many - ZZ28 on Dec 27, 2008, 3:56 PM

Exactly ... - cmf60 on Dec 27, 2008, 4:11 PM

There are many - ZZ28 on Dec 27, 2008, 3:58 PM

oil timing - lawrence coppola on Dec 27, 2008, 4:54 PM

Re: oil timing - cmf60 on Dec 27, 2008, 7:59 PM

Re: oil timing - lawrence coppola on Dec 27, 2008, 8:22 PM

Re: oil timing - cmf60 on Dec 27, 2008, 8:31 PM

Re: oil timing - lawrence coppola on Dec 27, 2008, 8:38 PM

Re: 13.5 GPM - ZZ28 on Dec 28, 2008, 6:14 AM

Re: 13.5 GPM - lawrence coppola on Dec 28, 2008, 12:54 PM

Re: 13.5 GPM - ZZ28 on Dec 28, 2008, 3:08 PM

Re: 13.5 GPM - lawrence coppola on Dec 29, 2008, 3:19 AM

Re: 13.5 GPM - ZZ28 on Dec 29, 2008, 4:23 AM

Reasons Are Simple - DaveMcLain on Dec 29, 2008, 6:33 AM

Had a long talk... - cmf60 on Dec 30, 2008, 5:00 AM

Re: 13.5 GPM - lawrence coppola on Dec 29, 2008, 3:49 PM

Re: 13.5 GPM - ZZ28 on Dec 29, 2008, 5:29 PM

Re: 13.5 GPM - lawrence coppola on Dec 29, 2008, 7:22 PM

SK/XE 80 GPM HTC - joe on Dec 29, 2008, 7:56 PM

Re: SK/XE 80 GPM HTC - lawrence coppola on Dec 29, 2008, 8:20 PM

Re: SK/XE 80 GPM HTC - ZZ28 on Dec 30, 2008, 4:23 AM

Re: SK/XE 80 GPM HTC - lawrence coppola on Dec 30, 2008, 4:52 AM

Carburetor View Thread - justin on Dec 27, 2008, 11:18 PM

Carburetor Choice - DaveMcLain on Dec 28, 2008, 7:23 AM

Always thougt - James P. on Dec 28, 2008, 7:58 AM

Re: Carburetor - seth on Dec 28, 2008, 7:39 AM

Vacuum vs Doublepump - Bryan Mappin on Dec 28, 2008, 8:49 AM

carb thoughts- - justin on Dec 28, 2008, 9:12 PM

Carburetor Calibration - DaveMcLain on Dec 29, 2008, 9:00 AM

Re: Carburetor Calibration - lawrence coppola on Dec 30, 2008, 4:56 AM

man o war blocks View Thread - Glenn on Dec 27, 2008, 12:09 AM

Re: man o war blocks - lawrence coppola on Dec 27, 2008, 3:01 PM

true - Glenn on Dec 27, 2008, 8:03 PM

screemer - lawrence coppola on Dec 27, 2008, 8:25 PM

Crap down under - Mylan Miller on Dec 27, 2008, 8:26 PM

Crap down under - Mylan Miller on Dec 27, 2008, 8:31 PM

shit downunder - lawrence coppola on Dec 27, 2008, 8:52 PM

Sorry to here about your problems... - Bruce on Dec 27, 2008, 9:31 PM

Re: Sorry to here about your problems... - lawrence coppola on Dec 27, 2008, 10:24 PM

Re: Sorry to here about your problems... - Glenn on Dec 27, 2008, 11:52 PM

parts - lawrence coppola on Dec 28, 2008, 12:26 AM

Re: parts - Glenn on Dec 28, 2008, 11:24 PM

Re: parts - WA351C on Dec 28, 2008, 11:40 PM

Re: parts - lawrence coppola on Dec 29, 2008, 1:42 AM

Re: parts - Glenn on Dec 29, 2008, 2:32 AM

Re: parts - lawrence coppola on Dec 29, 2008, 3:22 AM

Re: parts - Glenn on Dec 29, 2008, 12:43 PM

Re: parts - lawrence coppola on Dec 29, 2008, 3:05 PM

RE Man O War Blocks - Aus Ford Parts on Dec 29, 2008, 3:14 PM

Re: RE Man O War Blocks - lawrence coppola on Dec 29, 2008, 8:01 PM

Re: RE Man O War Blocks - Glenn on Dec 29, 2008, 10:19 PM

wanting to also get rid of power assist on steering linkage,what parts? View Thread - Roger on Dec 29, 2008, 8:45 AM

oops,this is on a 68 mustang - Roger on Dec 29, 2008, 12:07 PM

need - Dan on Dec 29, 2008, 12:18 PM

Re: need - Roger on Dec 29, 2008, 12:49 PM

removing power assist - Jerry on Dec 29, 2008, 4:28 PM

99.00 At laurel Mountain Mustang - denny on Dec 29, 2008, 4:52 PM

oil restriction? View Thread - justin on Dec 27, 2008, 10:54 PM

here we go again - lawrence coppola on Dec 28, 2008, 12:13 AM

Re: here we go again - justin on Dec 28, 2008, 12:53 AM

starting something - lawrence coppola on Dec 28, 2008, 1:43 AM

Re: starting something - justin on Dec 28, 2008, 1:59 AM

Re: starting something - Kevin Black on Dec 28, 2008, 2:19 AM

Re: starting something - lawrence coppola on Dec 28, 2008, 2:41 AM

Re: starting something - justin on Dec 28, 2008, 7:49 PM

Re: starting something - lawrence coppola on Dec 29, 2008, 1:59 AM

Do a search on here..... - Bruce on Dec 28, 2008, 6:51 AM

Mr Weidendorf's lifter bore bushing kit? - Dennis Kwasnycia on Dec 28, 2008, 3:15 PM

Re: Mr Weidendorf's lifter bore bushing kit? - Dennis Kwasnycia on Dec 28, 2008, 3:24 PM

Oiling Problems - wydendorf on Dec 28, 2008, 7:32 PM

Re: Oiling Problems - Dennis Kwasnycia on Dec 28, 2008, 8:05 PM

Re: Oiling Problems - Dennis Kwasnycia on Dec 28, 2008, 8:25 PM

cheep fix - lawrence coppola on Dec 29, 2008, 2:12 AM

Re: Mr Weidendorf's lifter bore bushing kit? - lawrence coppola on Dec 29, 2008, 2:49 PM

forum, searches, oil mods. - justin on Dec 28, 2008, 7:58 PM

Re: forum, searches, oil mods. - wydendorf on Dec 29, 2008, 9:17 AM

want to remove brake booster on 68 mustang..... View Thread - Roger on Dec 29, 2008, 6:49 AM

if you really want to... - duke on Dec 29, 2008, 8:37 AM

Re: if you really want to... - Roger on Dec 29, 2008, 8:43 AM

Re: if you really want to... - coupe3w on Dec 29, 2008, 8:54 AM

Re: if you really want to... - Kevin Black on Dec 29, 2008, 12:42 PM

Re: if you really want to... - Roger on Dec 29, 2008, 1:01 PM

Iron vs. Aluminum Head Weight View Thread - Jay on Dec 26, 2008, 8:50 PM

iron - tinman on Dec 26, 2008, 9:40 PM

iron 4v head weight - duke on Dec 26, 2008, 9:43 PM

CHI 3V 185 cc = 20 lbs Bare - Vic on Dec 27, 2008, 12:46 AM

Re: CHI 3V 185 cc = 20 lbs Bare - Jay on Dec 27, 2008, 4:01 PM

Re: CHI 3V 185 cc = 20 lbs Bare - Kevin Black on Dec 29, 2008, 12:49 PM

Anybody use e-bay much? View Thread - Bruce on Dec 27, 2008, 2:44 PM

Re: Anybody use e-bay much? - lawrence coppola on Dec 27, 2008, 2:51 PM

Anybody use e-bay much? - ZZ28 on Dec 27, 2008, 4:06 PM

There is a way around it - WA351C on Dec 27, 2008, 4:17 PM

thanks WA... - Bruce on Dec 27, 2008, 4:40 PM

bad world - lawrence coppola on Dec 27, 2008, 5:01 PM

You have some protection on money orders... - Bruce on Dec 27, 2008, 6:50 PM

Re: You have some protection on money orders... - lawrence coppola on Dec 27, 2008, 7:59 PM

ya know I was jus' kidd'n..... - Bruce on Dec 27, 2008, 9:25 PM

Re: ya know I was jus' kidd'n..... - lawrence coppola on Dec 27, 2008, 10:26 PM

I'm with Bruce... - kidv on Dec 27, 2008, 5:15 PM

E-bay / PayPal = Crap! - Andy on Dec 27, 2008, 5:49 PM

Re: E-bay / PayPal = Crap! - justin on Dec 27, 2008, 10:35 PM

Justin...Its called Capitalism...I toast you sir.. - Bruce on Dec 28, 2008, 6:58 AM

forced paypal - tinman on Dec 27, 2008, 10:34 PM

Ebay changed their rules, - Lowell on Dec 28, 2008, 6:46 AM

Mr Tin....can I come with ya..when you go to that shysters house... - Bruce on Dec 28, 2008, 6:57 AM

NEVER had a problem - John on Dec 28, 2008, 7:31 AM

PAY PAL CAN PROTECT YOU FROM LOSERS - TIMOTHY BLAIR on Dec 28, 2008, 11:07 AM

Your a buyer though - WA351C on Dec 28, 2008, 12:12 PM

this is capitalism... - AMac on Dec 28, 2008, 7:54 PM

You missed the point - WA351C on Dec 28, 2008, 11:27 PM

Absolutely - AMac on Dec 29, 2008, 11:09 AM

craigslist - kidv on Dec 29, 2008, 11:45 AM

ebay own a slice of Craigslist - WA351C on Dec 29, 2008, 12:28 PM

Re: ebay own a slice of Craigslist - Kevin Black on Dec 29, 2008, 12:39 PM

is there a forum for 71-73 mustangs View Thread - Tony Marbury on Dec 27, 2008, 7:49 PM

I bump that ? - Chris Berndt on Dec 27, 2008, 8:30 PM

yeah - Tony Marbury on Dec 27, 2008, 8:47 PM

classic forum - John on Dec 27, 2008, 8:49 PM

i feel ya - ryan on Dec 28, 2008, 1:23 PM

Re: i feel ya - Anonymous on Dec 29, 2008, 3:58 AM

Re: is there a forum for 71-73 mustangs - Gerahead on Dec 28, 2008, 2:47 PM

426 cid ? View Thread - 351fairlane on Dec 28, 2008, 7:34 PM

Re: 426 cid ? - lawrence coppola on Dec 29, 2008, 3:48 AM

NEED INFO ON 2 BOLT AUSSIE BLOCK View Thread - TIMOTHY BLAIR on Dec 28, 2008, 11:03 AM

Re: NEED INFO ON 2 BOLT AUSSIE BLOCK - lawrence coppola on Dec 28, 2008, 1:40 PM

ANY INFO ???? - TIMOTHY BLAIR on Dec 28, 2008, 2:57 PM

block filler - russell on Dec 28, 2008, 4:02 PM

Re: ANY INFO ???? - lawrence coppola on Dec 29, 2008, 3:40 AM

Duel 4 Intake? View Thread - Anonymous on Dec 28, 2008, 10:27 PM

Yes I am still around!! Got a stupid brake question. View Thread - Skooter on Dec 28, 2008, 9:27 AM

According to the 72 and 73 Ford Shop manuals - Lowell on Dec 28, 2008, 11:34 AM

Valve came off of a 79 capri. - Skooter on Dec 28, 2008, 1:32 PM

Good God Man!!!! - Chris Berndt on Dec 28, 2008, 11:54 AM

Nope, not dead yet! - Skooter on Dec 28, 2008, 1:30 PM

Thought everyone might enjoy this 1050 HP D3 engine View Thread - Gary Blair on Dec 27, 2008, 6:08 AM

Gary...I did...and thanks! - Bruce on Dec 28, 2008, 7:02 AM

Camshafts profiles? View Thread - Justin on Dec 25, 2008, 1:55 PM

Re: Camshafts profiles? - clevelandstyle on Dec 25, 2008, 2:07 PM

Re: Camshafts profiles? - Justin on Dec 25, 2008, 2:17 PM

Re: Camshafts profiles? - lawrence coppola on Dec 25, 2008, 3:40 PM

f246 - justin on Dec 27, 2008, 9:59 PM

Re: f246 - lawrence coppola on Dec 27, 2008, 10:22 PM

Re: f246 - tinman on Dec 27, 2008, 10:41 PM

Re: f246 - justin on Dec 27, 2008, 11:11 PM

Re: f246 - lawrence coppola on Dec 28, 2008, 12:40 AM

Re: f246 - justin on Dec 27, 2008, 11:05 PM

Re: f246 - lawrence coppola on Dec 28, 2008, 12:23 AM

Re: f246 - justin on Dec 28, 2008, 1:36 AM

Re: f246 - Glenn on Dec 27, 2008, 11:59 PM

Re: f246 - justin on Dec 28, 2008, 1:40 AM

Re: f246 - lawrence coppola on Dec 28, 2008, 2:31 AM

Re: Camshafts profiles? - Anonymous on Dec 25, 2008, 2:55 PM

Re: Camshafts profiles? - Justin on Dec 25, 2008, 3:17 PM

351c Straight LPG(propane) conversion recomendations View Thread - tom on Dec 22, 2008, 8:10 PM

Re: 351c Straight LPG(propane) conversion recomendations - jak on Dec 23, 2008, 3:23 AM

Re: 351c Straight LPG(propane) conversion recomendations - Walkinshaw on Dec 24, 2008, 2:38 AM

Propane Engine - DaveMcLain on Dec 24, 2008, 3:55 AM

Running LP - Bryan Mappin on Dec 24, 2008, 5:45 AM

couple issues with that ebay stuff - michael on Dec 28, 2008, 12:36 AM

Piston pin bushings for stock rods View Thread - Andy on Dec 27, 2008, 6:11 PM

no bush is ok - lawrence coppola on Dec 27, 2008, 7:58 PM

Boss 351 crankshaft? View Thread - AJ on Dec 27, 2008, 3:55 AM

maybe Blizz has a pic? - tinman on Dec 27, 2008, 8:54 AM

The D1ZX was cast in - joe on Dec 27, 2008, 9:54 AM

Re: The D1ZX was cast in - tinman on Dec 27, 2008, 11:15 AM

D1ZX-A was... - Randy on Dec 27, 2008, 7:28 PM

Re: Boss 351 crankshaft? - Anonymous on Dec 27, 2008, 11:20 AM

Re: Boss 351 crankshaft? - tinman on Dec 27, 2008, 2:08 PM

What does the test mark look like? - AJ on Dec 27, 2008, 2:26 PM

4MA B - lawrence coppola on Dec 27, 2008, 2:47 PM

IIRC - tinman on Dec 27, 2008, 2:56 PM

Re: IIRC - lawrence coppola on Dec 27, 2008, 3:22 PM

what's the B - tinman on Dec 27, 2008, 3:27 PM

An old Ford parts guy once told me it was simply refering to "brinell" - Bruce on Dec 27, 2008, 4:41 PM

they probably cast D1ZX in it because - joe on Dec 27, 2008, 5:06 PM

Re: they probably cast D1ZX in it because - DragBoss on Dec 27, 2008, 5:31 PM

MERRY CHRISTMAS TO ALL!! View Thread - Bruce on Dec 24, 2008, 6:45 AM

Re: MERRY CHRISTMAS TO ALL!! - Danford1 on Dec 24, 2008, 7:07 AM

Merry Christmas !!! - James Willett on Dec 24, 2008, 12:26 PM

Merry Christmas clevelanders! - duke on Dec 24, 2008, 12:56 PM

MERRY CHRISTMAS!!! Everyone! - Keith Hartley on Dec 24, 2008, 1:43 PM

Happy Holidays - machstang70 on Dec 24, 2008, 6:51 PM

My apologies... - Tod on Dec 25, 2008, 3:05 AM

Happy Holidays To All - George Pence on Dec 25, 2008, 4:08 PM

Happy Holidays to All! - ZZ28 on Dec 26, 2008, 4:57 PM

I think he also said.... - Tod on Dec 27, 2008, 2:53 AM

Merry Christmas - Falcon67 on Dec 26, 2008, 8:26 AM

Intake gaskets... View Thread - \'69 Pony on Dec 22, 2008, 7:25 AM

oil in the ex ports from - Dan on Dec 22, 2008, 9:38 AM

Intake gaskets... - ZZ28 on Dec 22, 2008, 7:19 PM

Re: Intake gaskets... - \'69 Pony on Dec 23, 2008, 10:37 AM

Mr. Gasket PN# 214 - Andy on Dec 23, 2008, 4:06 PM

Re: Mr. Gasket PN# 214 - 70TooMach on Dec 23, 2008, 7:24 PM

Re: Mr. Gasket PN# 214 - \'69 Pony on Dec 24, 2008, 6:05 AM

Re: Mr. Gasket PN# 214 - \\\'69 Pony on Dec 24, 2008, 6:09 AM

Intake - Andy on Dec 24, 2008, 8:13 AM

Re: Intake gaskets - ZZ28 on Dec 23, 2008, 8:28 PM

Which head? - Bruce on Dec 24, 2008, 6:45 AM

Re: Which head? - '69 Pony on Dec 24, 2008, 3:13 PM

With port filler? - Bruce on Dec 25, 2008, 6:02 AM

Re: Intake gaskets... - Anonymous on Dec 24, 2008, 9:50 AM

feeling the way - lawrence coppola on Dec 24, 2008, 8:17 PM

Torque wrench ? - Danny Wilson on Dec 24, 2008, 10:26 PM

Re: Torque wrench ? - Anonymous on Dec 25, 2008, 6:34 AM

Re: Torque wrench ? - '69 Pony on Dec 26, 2008, 6:26 AM

Re: Torque wrench? - ZZ28 on Dec 26, 2008, 6:34 AM

N.O.S. turkey pans and O.C.D. demons - Danny Wilson on Dec 26, 2008, 12:54 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Next >>

Clevelands Forever!351Cleveland.net

Clevelands Forever!
351Cleveland.net