be carefull that it is not too tight we did this not once but twice in a meeting. we had just fitted the sleeves and went racing .on warm up all was ok (because we used molley on the tips),came back from the first run and did the lash, man oh man some of the pushrod tips turned to shit!we wrplaced the bad ones and went round 2 same thing. so we pulled the pin .came home gave the lifters 0.0015 instead of 0.00075 (3/4 of a thou),then all was good.funny ,the MOPAR motor book I have said 0.0015 and we did not listen.OK we ran 300 lbs on the seat and 850 or so open and turned 10,000 BUT be carefull!
