Clevelands Forever!
351Cleveland.net

This forum is for the discussion of the US Ford 351 Cleveland, 351M (MODIFIED), 400 and Aussie 302C and 351C engines.

POST MESSAGE___ SEARCH___ CLASSIFIED ADS___ PHOTOS

USEFUL LINKS___ GUITAR AMPS___THE BENCH___MEMBERSHIP

The Cleveland Wiki NEW!

This forum requires membership for posting messages. Anyone can read, but you will have to be a member to post. For instructions on how to apply for membership, go here. It's easy and free!

Info on the New Tod Buttermore Cleveland Block

Visitors in this forum in the last 10 minutes: 17 Visitors
gt350hr, machoneman, tinman351, 14 guests

Not logged in | Login | Create Account

Search "Engine Build Forum" Post now!

Yet another disc brake question View Thread - strokeme on Nov 4, 2008, 6:13 AM

I tried front discs with no power boost - Roo on Nov 4, 2008, 8:48 AM

Re: I tried front discs with no power boost - James on Nov 4, 2008, 7:05 PM

You do not need.. - Theo on Nov 4, 2008, 9:13 AM

Re: You do not need.. - Butch on Nov 5, 2008, 11:26 AM

When I first did the job, I used the Granada discs with... - Tom Custom on Nov 4, 2008, 7:59 PM

Re: When I first did the job, I used the Granada discs with... - Mike on Nov 5, 2008, 4:28 AM

n/m-Thanks for link and info. - strokeme on Nov 5, 2008, 8:24 PM

Am I missing something? - BobnMary on Nov 10, 2008, 2:57 PM

Re: Am I missing something? - Mike on Nov 10, 2008, 5:05 PM

2V heads and RPM Air Gap View Thread - Len on Nov 8, 2008, 11:55 AM

By running the engine with the port mismatch - Roo on Nov 8, 2008, 12:11 PM

But is it hurting performance - Len on Nov 10, 2008, 2:21 PM

Leave it alone - Jim Sams on Nov 10, 2008, 2:53 PM

Guys with motor plates View Thread - Dustin Rinne on Nov 9, 2008, 1:55 PM

Re: Guys with motor plates - wydendorf on Nov 9, 2008, 5:58 PM

Motor Plate ? - Phil on Nov 10, 2008, 2:11 AM

Re: Motor Plate ? - NOS42 on Nov 10, 2008, 4:25 AM

motor/mid plates & limiters......... - DAVID on Nov 10, 2008, 2:02 PM

Ranchero finally got some paint. View Thread - James P. on Nov 3, 2008, 8:01 AM

sweeeet Reminds me of my High School Torino - blizz on Nov 3, 2008, 9:10 AM

Still mostly original... - James P. on Nov 3, 2008, 1:55 PM

Re: Still mostly original... - kidv on Nov 3, 2008, 5:16 PM

Runs good... - James P. on Nov 4, 2008, 8:14 AM

Pic - kidv on Nov 9, 2008, 6:06 PM

Painters - Randy on Nov 3, 2008, 5:41 PM

Re: Painters - James P. on Nov 4, 2008, 8:21 AM

Thanks James..... - Randy on Nov 4, 2008, 9:20 AM

It took a over a year for my car.. - J. E. Thatcher on Nov 4, 2008, 6:12 PM

Re: Ranchero finally got some paint. - Anonymous on Nov 4, 2008, 10:32 AM

Charger paint job - Randy on Nov 4, 2008, 1:59 PM

Re: Ranchero finally got some paint. - Clint on Nov 10, 2008, 6:32 AM

That Ranchero is Awesome - mike on Nov 9, 2008, 8:13 PM

car trashed!!need new one for clev.(63falcon/70nova/68mustang) View Thread - Roger on Nov 7, 2008, 7:16 AM

Re: car trashed!!need new one for clev.(63falcon/70nova/68mustang) - coupe3w on Nov 7, 2008, 8:28 AM

Re: car trashed!!need new one for clev.(63falcon/70nova/68mustang) - James on Nov 7, 2008, 9:03 PM

not a fb - Roger on Nov 10, 2008, 5:00 AM

393 not running right View Thread - darren on Nov 5, 2008, 5:24 PM

test - Dan on Nov 5, 2008, 6:02 PM

just rebuilt - darren on Nov 5, 2008, 6:23 PM

Help me help you.. - Randy on Nov 5, 2008, 6:42 PM

5 in - Dan on Nov 5, 2008, 6:51 PM

thank you - darren on Nov 5, 2008, 7:04 PM

help.... - Randy on Nov 6, 2008, 9:08 AM

basics - tinman on Nov 5, 2008, 8:20 PM

Thirty degeres initial? - Roo on Nov 5, 2008, 9:14 PM

Still Battling.... - cmf60 on Nov 6, 2008, 1:50 AM

distributor - darren on Nov 6, 2008, 3:41 AM

Darren what is the Accel part #? - Roo on Nov 6, 2008, 8:46 AM

Distributor - Andy on Nov 6, 2008, 7:34 AM

friction ? - capri351 on Nov 6, 2008, 10:31 AM

Friction... - Randy on Nov 6, 2008, 1:54 PM

rotates by hand with no plugs - darren on Nov 7, 2008, 3:33 AM

Motor - Andy on Nov 7, 2008, 8:20 AM

Re: 393 not running right - Anonymous on Nov 7, 2008, 10:24 AM

current carb - darren on Nov 7, 2008, 11:01 AM

Cam checking..... - Randy on Nov 7, 2008, 11:39 AM

Re: 393 not running right - coupe3w on Nov 7, 2008, 11:01 AM

Re: 393 not running right - Anonymous on Nov 7, 2008, 11:07 AM

Sounds like an intake not fitting - allenman on Nov 7, 2008, 2:45 PM

update on situation - darren on Nov 9, 2008, 12:27 PM

Carburetor issues - Roo on Nov 9, 2008, 1:06 PM

Darren IF.. - Randy on Nov 9, 2008, 3:27 PM

intake @.050 was 4 deg on damper - darren on Nov 9, 2008, 4:13 PM

By all means advance to the head of the class.... - Randy on Nov 9, 2008, 6:15 PM

Re: By all means advance to the head of the class.... - cmf60 on Nov 9, 2008, 7:01 PM

thanks to everyone progress rocks - darren on Nov 9, 2008, 7:03 PM

Carb - Andy on Nov 9, 2008, 6:30 PM

Re: Carb - Anonymous on Nov 9, 2008, 6:41 PM

Squirter - Andy on Nov 9, 2008, 7:16 PM

The squirter... - Randy on Nov 9, 2008, 8:19 PM

4v/c6/2.75 or 3.25 View Thread - Chris Berndt on Nov 8, 2008, 7:30 AM

Re: 4v/c6/2.75 or 3.25 - Kevin Black on Nov 8, 2008, 7:54 AM

Re: 4v/c6/2.75 or 3.25 - Chris Berndt on Nov 8, 2008, 8:23 AM

3.25's should be a good utility gear - Roo on Nov 8, 2008, 8:59 AM

Re: 3.25's should be a good utility gear - Chris Berndt on Nov 8, 2008, 9:06 AM

double post OOOOPS!!!!!! - Chris Berndt on Nov 8, 2008, 9:07 AM

3.25.....Smoke 'em if you got 'em. - Danny Wilson on Nov 8, 2008, 10:32 AM

3.25's - Andy on Nov 8, 2008, 5:08 PM

Re: 3.25's - Kevin Black on Nov 9, 2008, 9:23 AM

351 cleveland siamese block View Thread - billy pearson on Nov 6, 2008, 7:12 PM

we need more info from you - joe on Nov 6, 2008, 8:12 PM

any word ? - joe on Nov 8, 2008, 3:59 PM

Re: 351 cleveland siamese block - billy pearson on Nov 8, 2008, 6:53 PM

Spark Plug Gap w/MSD 6A View Thread - Anonymous on Nov 5, 2008, 3:55 PM

Re: Spark Plug Gap w/MSD 6A - kidv on Nov 5, 2008, 4:05 PM

Spark plug gap - Randy on Nov 5, 2008, 4:24 PM

MSD REC. - DragBoss on Nov 5, 2008, 7:04 PM

Plug gap - Randy on Nov 6, 2008, 10:09 AM

Re: Plug gap - kidv on Nov 6, 2008, 3:51 PM

hey kidv - Carl on Nov 6, 2008, 4:16 PM

Question - DragBoss on Nov 6, 2008, 5:59 PM

I always gap the plugs at .060" - Roo on Nov 6, 2008, 7:32 PM

Re: I always gap the plugs at .060" - James on Nov 6, 2008, 7:56 PM

"That box isn't going to last long mounted there, when it gets wet" - Roo on Nov 6, 2008, 9:00 PM

Re: "That box isn't going to last long mounted there, when it gets wet" - kidv on Nov 7, 2008, 10:14 AM

Can you take it to the car wash and blast it with the wand? - Roo on Nov 7, 2008, 11:42 AM

Re: Can you take it to the car wash and blast it with the wand? - kidv on Nov 7, 2008, 5:38 PM

Well, I blast it with the wand.. - Roo on Nov 8, 2008, 12:19 AM

sounds like an oil filled unit - joe on Nov 7, 2008, 7:37 PM

.060 gap - Randy on Nov 7, 2008, 9:20 AM

Re: .060 gap - DragBoss on Nov 8, 2008, 5:55 PM

RHOADS LIFTERS View Thread - Steve Andrews on Nov 3, 2008, 4:24 PM

The "secret" of Rhodes lifters... - Tom Custom on Nov 3, 2008, 5:10 PM

Re: RHOADS LIFTERS - Roo on Nov 4, 2008, 9:05 AM

Anyone know if they are made in the U.S.? - ifergusson on Nov 4, 2008, 11:10 AM

USA made lifters - Randy on Nov 4, 2008, 2:12 PM

Re: USA made lifters - Roo on Nov 5, 2008, 3:41 PM

Rhoads Lifters - Bryan Mappin on Nov 4, 2008, 3:01 PM

Rhoads V-max - Steve on Nov 5, 2008, 1:56 AM

RHOADS LIFTERS. - Steve Andrews on Nov 5, 2008, 3:18 PM

Re: RHOADS LIFTERS. - James on Nov 5, 2008, 3:55 PM

solid roller - steve on Nov 6, 2008, 6:17 AM

Don't like em - cmf60 on Nov 7, 2008, 2:47 PM

Rhoads lifters - Anonymous on Nov 7, 2008, 7:44 PM

Fair enough - cmf60 on Nov 8, 2008, 1:36 AM

The Jury is still out. - Steve Andrews on Nov 8, 2008, 6:30 AM

I have them, would use them again - mike on Nov 8, 2008, 7:06 AM

Re: RHOADS LIFTERS - funcars on Nov 8, 2008, 2:12 PM

photo upload? View Thread - paul on Nov 8, 2008, 12:39 PM

Got to photobucket.com and get a free pix hosting account. - Tom Custom on Nov 8, 2008, 1:07 PM

milodon oil pan part # for 68 mustang View Thread - josh on Nov 6, 2008, 9:10 PM

Re: milodon oil pan part # for 68 mustang - coupe3w on Nov 7, 2008, 5:15 AM

Canton oil pan - Jim Sams on Nov 8, 2008, 5:52 AM

Higher RPM Popping View Thread - hawkxr7 on Nov 5, 2008, 9:59 PM

Your running lean - danford1 on Nov 5, 2008, 10:36 PM

Thanks Danford1 - Hawkxr7 on Nov 7, 2008, 2:39 PM

Your very welcome. Glad I could help N/M - danford1 on Nov 7, 2008, 9:40 PM

turkey pan blues... sealing issues, suggestions? View Thread - mike on Nov 5, 2008, 7:39 PM

Re: turkey pan blues... sealing issues, suggestions? - Anonymous on Nov 5, 2008, 8:10 PM

Re: turkey pan blues... sealing issues, suggestions? - tinman on Nov 5, 2008, 8:23 PM

answer to your questions... more info - mike on Nov 5, 2008, 9:04 PM

I like to trim the ports off the turkeys - Roo on Nov 5, 2008, 9:23 PM

HYLAMAR - BOB on Nov 5, 2008, 11:18 PM

It was either the manifold or the gasket - mike on Nov 7, 2008, 5:15 PM

Re: turkey pan blues... sealing issues, suggestions? - kidv on Nov 7, 2008, 5:37 PM

Offenhauser Dual Port View Thread - david gibson on Nov 6, 2008, 4:17 AM

I run one on my Bronco w/ a 400 - blizz on Nov 6, 2008, 7:03 AM

Daily driver and mileage - Roo on Nov 6, 2008, 8:54 AM

Thanks - david gibson on Nov 7, 2008, 4:51 AM

megaphones View Thread - joe on Nov 6, 2008, 4:27 PM

Re: megaphones - tinman on Nov 6, 2008, 5:14 PM

who knows what shape that battery's in - joe on Nov 6, 2008, 5:50 PM

I think theres a miss in the pipe - Roo on Nov 6, 2008, 7:32 PM

Cam difference View Thread - Tony on Oct 26, 2008, 8:08 PM

I added the cam cards - Tony on Oct 27, 2008, 9:48 AM

crane - joe on Oct 27, 2008, 11:06 AM

Has any one run the crane cam - Tony on Oct 27, 2008, 5:11 PM

crane f260 - Randy on Oct 28, 2008, 5:55 PM

Re: crane f260 - Tony on Oct 28, 2008, 7:54 PM

f260 - Randy on Oct 28, 2008, 10:28 PM

Re: f260 - Tony on Oct 29, 2008, 7:13 PM

Re f260 - Randy on Oct 30, 2008, 8:03 AM

advancing the cam - Tony on Oct 30, 2008, 8:07 PM

Desk Top dyno anyone ????? - Tony on Oct 30, 2008, 12:04 PM

desk top dyno - Randy on Oct 30, 2008, 2:56 PM

Re: desk top dyno - Tony on Oct 30, 2008, 6:37 PM

re cam timing - Randy on Oct 30, 2008, 7:38 PM

I am also using this cam - Brian Guggenmos on Nov 1, 2008, 4:22 PM

Flat tappet to roller - Randy on Nov 2, 2008, 10:54 AM

more or less - Dan on Nov 2, 2008, 3:10 PM

flat/roller - Randy on Nov 2, 2008, 5:31 PM

for the - Dan on Nov 2, 2008, 5:38 PM

mushroom lifters - Miller Mylan on Nov 5, 2008, 4:20 PM

Mushroom lifters... - Randy on Nov 5, 2008, 4:36 PM

M lifters - Dan on Nov 5, 2008, 6:20 PM

costs - Miller Mylan on Nov 6, 2008, 12:09 AM

old rates - Dan on Nov 6, 2008, 7:09 AM

We used.... - Randy on Nov 6, 2008, 9:52 AM

Machinist wants to buy short block View Thread - Shaneus on Nov 5, 2008, 4:37 PM

price - Dan on Nov 5, 2008, 6:10 PM

Re: Machinist wants to buy short block - Anonymous on Nov 5, 2008, 8:31 PM

Would include - Shaneus on Nov 6, 2008, 3:57 AM

Re: Machinist wants to buy short block - Butch on Nov 5, 2008, 8:40 PM

Convert single plane intake to divided 360 View Thread - Vic on Oct 31, 2008, 9:29 AM

Re: Convert single plane intake to divided 360 - Anonymous on Oct 31, 2008, 9:35 AM

Like this? - Roo on Oct 31, 2008, 10:34 AM

Nothing new then - Vic on Oct 31, 2008, 10:56 AM

Re: Convert single plane intake to divided 360 - Anonymous on Oct 31, 2008, 11:35 AM

Re: Convert single plane intake to divided 360 - Dan Jones on Oct 31, 2008, 12:49 PM

Offy 360? - Walkinshaw on Nov 2, 2008, 2:48 AM

Never seen a divided 360 in the flesh so......... - Vic on Nov 2, 2008, 10:52 PM

Re: Never seen a divided 360 in the flesh so......... - Walkinshaw on Nov 3, 2008, 1:27 AM

Re: Never seen a divided 360 in the flesh so......... - Walkinshaw on Nov 4, 2008, 12:05 AM

WOW - Vic on Nov 4, 2008, 7:32 AM

Can You email me more pictures for the WIKI? Very Nice work! - blizz on Nov 4, 2008, 10:03 AM

Looks great Walkinshaw - Roo on Nov 4, 2008, 8:54 AM

Re: Looks great Walkinshaw - Walkinshaw83 on Nov 4, 2008, 2:09 PM

nostalga look - Miller Mylan on Nov 5, 2008, 11:57 PM

4 hole spacer? - Jimmie Phillips on Nov 6, 2008, 2:25 AM

Jomar Stud girdle question View Thread - funcars on Nov 3, 2008, 7:57 AM

lash change - Dan on Nov 3, 2008, 9:19 AM

Re: Jomar Stud girdle question - wydendorf on Nov 3, 2008, 11:49 AM

Junk adjusters - clevelandstyle on Nov 3, 2008, 3:10 PM

Same issues - Dustin Rinne on Nov 3, 2008, 8:12 PM

Re: Same issues - funcars on Nov 3, 2008, 8:49 PM

Jomar adjusters - Mike on Nov 5, 2008, 5:23 PM

Jomars... - Bruce on Nov 5, 2008, 6:21 PM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Next >>

Clevelands Forever!351Cleveland.net

Clevelands Forever!
351Cleveland.net