Clevelands Forever!
351Cleveland.net

This forum is for the discussion of the US Ford 351 Cleveland, 351M (MODIFIED), 400 and Aussie 302C and 351C engines.

POST MESSAGE___ SEARCH___ CLASSIFIED ADS___ PHOTOS

USEFUL LINKS___ GUITAR AMPS___THE BENCH___MEMBERSHIP

The Cleveland Wiki NEW!

This forum requires membership for posting messages. Anyone can read, but you will have to be a member to post. For instructions on how to apply for membership, go here. It's easy and free!

Info on the New Tod Buttermore Cleveland Block

Visitors in this forum in the last 10 minutes: 16 Visitors
gt350hr, machoneman, tinman351, 13 guests

Not logged in | Login | Create Account

Search "Engine Build Forum" Post now!

Piston/Converter question 351c 4v Q code Mustang View Thread - David on Aug 24, 2008, 6:12 AM

Welcome, David. - Tom Custom on Aug 24, 2008, 7:19 AM

Re: Welcome, David. - Anonymous on Aug 24, 2008, 8:03 AM

Re: Welcome, David. - Jay M on Aug 24, 2008, 7:51 PM

Some were 4 bolt also - Tom L. on Aug 24, 2008, 9:40 PM

Thanks - David on Aug 25, 2008, 2:46 PM

4 bolt - Mark on Aug 25, 2008, 4:43 PM

c-4 troubles View Thread - tory on Aug 21, 2008, 7:02 PM

c4 - James Willett on Aug 22, 2008, 5:52 AM

thinking that - Dan on Aug 22, 2008, 10:29 AM

Re: thinking that - tory on Aug 23, 2008, 9:34 PM

C4 no forward - Mark McKeown on Aug 25, 2008, 6:35 AM

Thanks - tory on Aug 25, 2008, 4:10 PM

Timing Chain Covers View Thread - Richard Herget on Aug 25, 2008, 7:55 AM

Re: Timing Chain Covers - Carl on Aug 25, 2008, 1:52 PM

Re: Timing Chain Covers - Butch on Aug 25, 2008, 2:10 PM

Motor Finally In View Thread - George on Aug 24, 2008, 6:51 PM

Fox - John on Aug 25, 2008, 7:16 AM

Re: Motor Finally In - Carl on Aug 25, 2008, 1:53 PM

holy crap...read this... View Thread - Brad Ford on Aug 23, 2008, 1:50 PM

Re: holy crap...read this... - Anonymous on Aug 23, 2008, 1:54 PM

I got quoted by Darin...life is good - duke on Aug 23, 2008, 2:26 PM

needs login - tinman on Aug 23, 2008, 2:27 PM

totally worth the login - duke on Aug 23, 2008, 2:30 PM

Re: totally worth the login - tinman on Aug 23, 2008, 2:52 PM

New Data....its gets better - Brad Ford on Aug 25, 2008, 7:32 AM

Ignition timing question/jetting troubleshooting help – fresh 408c View Thread - Chris W on Aug 18, 2008, 11:50 AM

Re: Ignition timing question/jetting troubleshooting help – fresh 408c - Kelly on Aug 18, 2008, 12:33 PM

93 octane (pump gas) - Chris W on Aug 18, 2008, 1:10 PM

For what its worth..... - strokeme on Aug 18, 2008, 3:23 PM

For what its worth..... - strokeme on Aug 18, 2008, 3:33 PM

Just wanted to say thanks - Chris W on Aug 25, 2008, 4:22 AM

Going in the right direction View Thread - James Willett on Aug 23, 2008, 7:30 AM

Re: Going in the right direction - tinman on Aug 23, 2008, 2:34 PM

Re: Going in the right direction - Adam on Aug 23, 2008, 4:41 PM

Thanks - James Willett on Aug 24, 2008, 5:47 AM

dyno question - duke on Aug 24, 2008, 10:22 AM

3350# - tinman on Aug 24, 2008, 11:31 AM

Thanks - James Willett on Aug 24, 2008, 4:01 PM

351M/400 w/ C5? View Thread - bopper on Aug 18, 2008, 2:43 PM

Trans - Falcon67 on Aug 18, 2008, 3:02 PM

Re: 351M/400 w/ C5? - Miller Mylan on Aug 20, 2008, 10:29 PM

Re: 351M/400 w/ C5? - Miller Mylan on Aug 21, 2008, 3:12 AM

re: editing - tinman on Aug 23, 2008, 2:54 PM

dipstick swap - ifergusson on Aug 24, 2008, 1:51 PM

C-4 or FMX which one would you use? View Thread - denny on Aug 19, 2008, 2:41 PM

what trans - Dan on Aug 19, 2008, 2:45 PM

Re: C-4 or FMX which one would you use? - Anonymous on Aug 19, 2008, 2:46 PM

Re: C-4 or FMX which one would you use? - denny on Aug 19, 2008, 2:56 PM

C4 - clevelandstyle on Aug 19, 2008, 6:15 PM

70-? C4 trans - denny on Aug 19, 2008, 6:47 PM

Re: 70-? C4 trans - Miller Mylan on Aug 21, 2008, 3:23 AM

C4 - Falcon67 on Aug 19, 2008, 8:09 PM

70 FMX - denny on Aug 19, 2008, 9:24 PM

FMX consumes more power.. - J. E. Thatcher on Aug 19, 2008, 9:41 PM

If you don't want to hunt a trans - Falcon67 on Aug 20, 2008, 8:34 AM

Both have there place...... - DAVID on Aug 19, 2008, 10:22 PM

FMX is a boat anchor! - Adrian351 on Aug 20, 2008, 8:21 AM

Weights - allenman on Aug 20, 2008, 9:29 AM

Trans Weights - Adrian351 on Aug 20, 2008, 10:28 AM

Re: Trans Weights - allenman on Aug 20, 2008, 3:54 PM

Re: Trans Weights - Monty Fountain on Aug 20, 2008, 4:26 PM

Very interesting - allenman on Aug 20, 2008, 9:31 PM

Trans Weights - Adrian351 on Aug 20, 2008, 9:41 PM

Pan fill vs. case fill - Tom Custom on Aug 20, 2008, 5:17 PM

Pan fill - Falcon67 on Aug 21, 2008, 4:44 AM

Re: C-4 or FMX which one would you use? - Miller Mylan on Aug 20, 2008, 10:06 PM

case or pan - Dan on Aug 21, 2008, 12:37 AM

Looking for a FMX torque converter - denny on Aug 23, 2008, 12:58 AM

Broader or Scotty The Mad Porter - TommyK on Aug 23, 2008, 6:43 AM

Re: case or pan - tinman on Aug 23, 2008, 5:33 AM

1970 boss 302 heads? View Thread - John on Aug 22, 2008, 7:37 PM

Re: 1970 boss 302 heads? - James on Aug 22, 2008, 8:10 PM

boss heads - John on Aug 22, 2008, 8:46 PM

allot.. - J. E. Thatcher on Aug 22, 2008, 8:56 PM

floundering again and back for advice... View Thread - Jack on Aug 18, 2008, 7:52 PM

Could be a few things - Adrian351 on Aug 19, 2008, 2:12 AM

Here's my stick action! - Adrian351 on Aug 19, 2008, 8:04 AM

Re: Here's my stick action! - Jack on Aug 19, 2008, 7:27 PM

Yep.....3rd gear only - Adrian351 on Aug 19, 2008, 9:59 PM

3 rd gear burn out - Miller Mylan on Aug 20, 2008, 10:19 PM

Fan mail for the flounder - Falcon67 on Aug 19, 2008, 7:10 AM

Re: Fan mail for the flounder - Jack on Aug 19, 2008, 7:24 PM

Run what fits the car - Falcon67 on Aug 19, 2008, 8:03 PM

at the strip - Dan on Aug 19, 2008, 12:13 PM

Re: floundering again and back for advice... - wydendorf on Aug 19, 2008, 5:11 PM

Re: floundering again and back for advice... - Jack on Aug 19, 2008, 7:35 PM

Stock Flywheel - Adrian351 on Aug 19, 2008, 10:10 PM

Re: floundering again and back for advice... - '69 Pony on Aug 19, 2008, 6:13 PM

Re: floundering again and back for advice... - Jack on Aug 19, 2008, 7:37 PM

some thoughts....... - Bruce on Aug 19, 2008, 7:45 PM

Jack...sorry did not see your last post.... - Bruce on Aug 19, 2008, 7:47 PM

Question on rear and some more observations on M/T Drag Radials - rdu on Aug 20, 2008, 8:22 AM

Locker - Falcon67 on Aug 20, 2008, 8:30 AM

Thanks for all the advice... - Jack on Aug 22, 2008, 7:23 PM

weak links - dave on Aug 22, 2008, 8:51 PM

Arao 4 valve heads View Thread - Rich Carlisle on Sep 12, 2007, 1:53 PM

Re: Arao 4 valve heads - coupe3w on Sep 12, 2007, 2:13 PM

Re: Arao 4 valve heads - Anonymous on Sep 12, 2007, 5:04 PM

Re: Arao 4 valve heads - Kevin Black on Sep 12, 2007, 5:15 PM

What $12,000 USD can buy you besides a set of ARAO heads..... - George Pence on Sep 12, 2007, 5:51 PM

yikes! - Billy Henderson on Sep 12, 2007, 6:19 PM

2 years ago ( or close ) they were only - glennz on Sep 12, 2007, 6:50 PM

4 Valve Per Cylinder Cleveland Heads - JFFR on Sep 12, 2007, 7:23 PM

They aren't cammers - Ben Sinclair on Sep 12, 2007, 9:01 PM

thanks for clearing that up - Billy Henderson on Sep 12, 2007, 9:05 PM

Heads - Rich Carlisle on Sep 13, 2007, 6:23 AM

cheaper 4 valve heads - Kaz on Jul 23, 2008, 8:52 PM

32 valves, but it is still one cam in the same spot - Roo on Jul 23, 2008, 11:49 PM

they say 4 valve always out preforms 2 valve? - Kaz on Jul 24, 2008, 1:07 AM

Re: they say 4 valve always out preforms 2 valve? - Q-CodeMach on Jul 24, 2008, 4:44 AM

DOHC 351C - Falcon67 on Jul 24, 2008, 8:33 AM

Im probably going to get flamed for this but.... - steve on Jul 24, 2008, 9:21 AM

Lets get flamed - shaneus on Jul 24, 2008, 6:09 PM

Re: Lets get flamed - Kaz on Jul 24, 2008, 6:18 PM

Maybe Tod needs another project! - Rich Carlisle on Jul 24, 2008, 9:19 AM

Speaking of Tod’s Block and 4-valve heads……. - Chad on Jul 24, 2008, 10:30 AM

Tods next casting project maybe??? - Kaz on Jul 24, 2008, 11:44 AM

Re: Tods next casting project maybe??? - Kaz on Jul 24, 2008, 12:56 PM

Mr Fueling... Mr Schubeck - Kaz on Jul 24, 2008, 3:36 PM

32 Valve Ford V8 - George Pence on Jul 24, 2008, 11:24 PM

Re: 32 Valve Ford V8 - Kevin Black on Jul 25, 2008, 11:44 AM

why not a cheaper 4 valve head? - Kaz on Jul 25, 2008, 12:36 PM

Re: why not a cheaper 4 valve head? - Kevin Black on Jul 26, 2008, 12:13 AM

Re: why not a cheaper 4 valve head? - Kaz on Jul 26, 2008, 2:08 AM

4 valve Springless Valvetrain For Push Rod Engines??? - Kaz on Jul 29, 2008, 3:08 PM

Valveless, Springless heads - Kaz on Aug 15, 2008, 7:41 PM

Re: Valveless, Springless heads - Kaz on Aug 15, 2008, 7:59 PM

am i - Tom in Vegas on Aug 15, 2008, 9:30 PM

Re: am i - Kaz on Aug 15, 2008, 10:00 PM

Re: Arao 4 valve heads - Anonymous on Aug 16, 2008, 12:11 PM

Saw an engine at Bonneville - Robert on Aug 21, 2008, 3:21 PM

araoengineering - Kaz on Aug 22, 2008, 4:00 PM

Re: araoengineering - Kaz on Aug 22, 2008, 4:17 PM

How do you launch with a 2800-3200 Stall Convertor? View Thread - C urt Kellogg on Aug 18, 2008, 4:59 PM

Launch RPM......... - DAVID on Aug 18, 2008, 5:28 PM

Stall converter Launching - David Vincent on Aug 18, 2008, 7:05 PM

How does the stall convertor operate? Just followed my engine builder/cam advice! - C urt Kellogg on Aug 18, 2008, 7:32 PM

Just drive it - Falcon67 on Aug 18, 2008, 8:36 PM

Engine builder says 450HP @ 6,400 RPM..... - Nick on Aug 19, 2008, 8:10 AM

shift points - steve.k on Aug 22, 2008, 2:29 PM

450hp@6400??? - kidv on Aug 22, 2008, 2:39 PM

what shifter do you use? View Thread - Steve.k on Aug 21, 2008, 12:15 PM

Shifter - kidv on Aug 21, 2008, 2:18 PM

Re: Shifter - Tater on Aug 21, 2008, 2:48 PM

shifter - Steve.k on Aug 21, 2008, 3:24 PM

Cheetah scs - DragBoss on Aug 21, 2008, 6:10 PM

Hurst V-gate - duke on Aug 21, 2008, 6:59 PM

B&M Pro Ratchet - danford1 on Aug 21, 2008, 7:39 PM

b& m pro shifter - steve.k on Aug 22, 2008, 12:41 PM

Some kind of Hurst shifter here too... - Sportsroof on Aug 22, 2008, 9:45 AM

Carb Downsizing View Thread - 7TFord on Aug 21, 2008, 10:17 AM

Re: Carb Downsizing - James on Aug 21, 2008, 4:14 PM

Re: Carb Downsizing - Anonymous on Aug 22, 2008, 5:22 AM

Re: Carb Downsizing - Kevin Black on Aug 22, 2008, 10:45 AM

Block update View Thread - Tod on Aug 22, 2008, 3:46 AM

Todd keep up the good work - James Willett on Aug 22, 2008, 5:46 AM

400 weight View Thread - matt on Aug 19, 2008, 6:34 AM

weight - Dan on Aug 19, 2008, 12:09 PM

Re: weight - matt on Aug 19, 2008, 6:31 PM

Ford factory weight data. - Tom Custom on Aug 19, 2008, 12:56 PM

A bigger block - bopper on Aug 19, 2008, 1:42 PM

Crank - Falcon67 on Aug 19, 2008, 8:12 PM

crank weight/swap? - Brad Ford on Aug 20, 2008, 11:26 AM

C & E - Dan on Aug 20, 2008, 1:02 PM

there you go... - Brad Ford on Aug 20, 2008, 1:31 PM

Re: C & E - Anonymous on Aug 20, 2008, 2:31 PM

Re: C & E - Monty Fountain on Aug 20, 2008, 7:02 PM

Welcome Monty... - Brad Ford on Aug 21, 2008, 6:57 AM

Rods for 4.00 stroke cleveland - Miller Mylan on Aug 20, 2008, 9:54 PM

400 rod weights? - Brad Ford on Aug 21, 2008, 6:59 AM

400 rods - Steve.k on Aug 21, 2008, 11:46 AM

Intake / gasket questions... View Thread - '69 Pony on Aug 21, 2008, 5:40 AM

Opinion - Chris Berndt on Aug 21, 2008, 8:46 AM

Must read! True story! View Thread - Matthew Caudill on Aug 19, 2008, 10:14 PM

Excellent story - Falcon67 on Aug 20, 2008, 8:32 AM

I have been going to SEMA - Tom in Vegas on Aug 20, 2008, 9:49 AM

Re: Must read! True story! - denny on Aug 20, 2008, 5:48 PM

You will like Jack's museum. - danford1 on Aug 20, 2008, 9:23 PM

Oiling problem? Wiped cam. View Thread - Antti on Aug 14, 2008, 8:58 AM

I Disagree - danford1 on Aug 14, 2008, 9:30 AM

Re: I Disagree - Anonymous on Aug 14, 2008, 12:43 PM

Re: I Disagree - steve on Aug 14, 2008, 1:03 PM

mineral oil - Dan on Aug 14, 2008, 1:30 PM

Re: Oiling problem? Wiped cam. - tinman on Aug 14, 2008, 4:31 PM

Re: Oiling problem? Wiped cam. - Carl on Aug 14, 2008, 4:52 PM

When you guys say you're wiping lobes what qualifies ? - joe on Aug 14, 2008, 5:36 PM

Good question. - Tom Custom on Aug 14, 2008, 8:25 PM

Re: When you guys say you're wiping lobes what qualifies ? - Carl on Aug 15, 2008, 7:43 AM

Ranch, do you have stock or adjustable rockers? - Tom Custom on Aug 14, 2008, 8:28 PM

Stock rockers - Antti on Aug 15, 2008, 1:22 AM

Oil eating up flat tappet cams - Miller Mylan on Aug 15, 2008, 3:15 AM

Oil for flat tappet cams - Sportsroof on Aug 15, 2008, 4:12 AM

Letter from Amsoil on wiped cams. They still make good oils for flat tappets :-) - danford1 on Aug 15, 2008, 7:02 AM

RE-Amsoil - Miller Mylan on Aug 15, 2008, 10:37 AM

Break in - Falcon67 on Aug 15, 2008, 1:08 PM

VR-1 - tinman on Aug 15, 2008, 6:02 PM

VR-1 - tinman on Aug 15, 2008, 6:03 PM

Re: VR-1 - Brad Smith on Aug 15, 2008, 6:13 PM

Re: VR-1 - Dennis Kwasnycia on Aug 19, 2008, 4:52 PM

VR-1 - Falcon67 on Aug 19, 2008, 8:13 PM

hughes engine racing oil - wildplum on Aug 19, 2008, 10:11 PM

Re: Break in - Dennis Kwasnycia on Aug 20, 2008, 3:35 PM

<< Prev

11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Next >>

Clevelands Forever!351Cleveland.net

Clevelands Forever!
351Cleveland.net