Clevelands Forever!
351Cleveland.net

This forum is for the discussion of the US Ford 351 Cleveland, 351M (MODIFIED), 400 and Aussie 302C and 351C engines.

POST MESSAGE___ SEARCH___ CLASSIFIED ADS___ PHOTOS

USEFUL LINKS___ GUITAR AMPS___THE BENCH___MEMBERSHIP

The Cleveland Wiki NEW!

This forum requires membership for posting messages. Anyone can read, but you will have to be a member to post. For instructions on how to apply for membership, go here. It's easy and free!

Info on the New Tod Buttermore Cleveland Block

Visitors in this forum in the last 10 minutes: 17 Visitors
gt350hr, machoneman, tinman351, 14 guests

Not logged in | Login | Create Account

Search "Engine Build Forum" Post now!

Rare Offy for the Wiki? View Thread - Roo on Oct 23, 2008, 10:56 AM

Re: Rare Offy for the Wiki? - Dan Jones on Oct 24, 2008, 8:05 AM

MPH Up or Down with Increased Traction View Thread - hawkxr7 on Oct 20, 2008, 8:50 PM

Lower n/m - Roo on Oct 20, 2008, 11:10 PM

Lower - kidv on Oct 21, 2008, 2:11 AM

the same or higher - Dan on Oct 21, 2008, 5:57 AM

No change - Falcon67 on Oct 21, 2008, 7:14 AM

Lower - allenman on Oct 21, 2008, 7:15 AM

Drag - Falcon67 on Oct 21, 2008, 11:01 AM

if you gain traction by - Dan on Oct 21, 2008, 11:39 AM

Speed - Miller Mylan on Oct 21, 2008, 11:48 AM

Re: MPH Up or Down with Increased Traction - kidv on Oct 21, 2008, 11:50 AM

5.0 stangs bottle or no bottle - Dan on Oct 21, 2008, 4:57 PM

Dan are you on the bottle? - Roo on Oct 21, 2008, 6:05 PM

no bottle here - Dan on Oct 21, 2008, 7:08 PM

depends n/m - bop on Oct 21, 2008, 11:55 AM

I'm with bopper - Mike on Oct 21, 2008, 5:06 PM

Ok Hawk, tell us you results to settle this! - Roo on Oct 21, 2008, 10:21 PM

Not sure? - hawkxr7 on Oct 22, 2008, 9:15 PM

Re: Not sure? - Tony on Oct 22, 2008, 9:56 PM

Indecision - Falcon67 on Oct 23, 2008, 7:15 AM

That changes the question - Roo on Oct 23, 2008, 9:30 AM

Drag Radials not Slicks - Hawkxr7 on Oct 23, 2008, 10:23 PM

Radials vs slicks - Falcon67 on Oct 24, 2008, 7:38 AM

393ci cleveland help View Thread - darren on Oct 18, 2008, 3:07 PM

my old and new cam specs - darren on Oct 18, 2008, 3:23 PM

Cam comparison - Monty Fountain on Oct 18, 2008, 7:07 PM

Need more particulars - Roo on Oct 18, 2008, 3:38 PM

Re:393 - strokeme on Oct 18, 2008, 7:48 PM

I smell something.... - cmf60 on Oct 19, 2008, 1:33 AM

Agree - kidv on Oct 19, 2008, 10:19 AM

Timing - Andy on Oct 19, 2008, 6:40 AM

heads - darren on Oct 19, 2008, 7:35 AM

Timing - Andy on Oct 19, 2008, 9:39 AM

RE: manifold vacuum - strokeme on Oct 19, 2008, 5:38 PM

thanks - darren on Oct 19, 2008, 7:33 PM

cam timing/degreeing - darren on Oct 22, 2008, 2:29 PM

Time for a little test - Roo on Oct 22, 2008, 4:03 PM

Also please id the metal blob that holds up the carburetor - Roo on Oct 22, 2008, 5:34 PM

intake is - darren on Oct 22, 2008, 6:18 PM

I would gas the Excelerator - Roo on Oct 22, 2008, 7:29 PM

total package - Dan on Oct 22, 2008, 4:08 PM

package includes - darren on Oct 22, 2008, 6:48 PM

cam - Dan on Oct 22, 2008, 8:22 PM

Many questions - cmf60 on Oct 22, 2008, 10:27 PM

will check these - darren on Oct 23, 2008, 1:41 PM

Plugs - Andy on Oct 23, 2008, 11:24 PM

Change of plans....looking for a much smaller list of mods to 351C View Thread - Dan North on Sep 18, 2008, 10:25 AM

Re: Change of plans....looking for a much smaller list of mods to 351C - Anonymous on Sep 18, 2008, 11:33 AM

Re: Change of plans....looking for a much smaller list of mods to 351C - Dan North on Sep 18, 2008, 11:46 AM

Re: Change of plans....looking for a much smaller list of mods to 351C - Anonymous on Sep 18, 2008, 1:52 PM

Hooker Comps - James P. on Sep 19, 2008, 6:56 AM

Re: Change of plans....looking for a much smaller list of mods to 351C - Dan North on Sep 19, 2008, 9:59 AM

Low Budget Shopping List - George Pence on Sep 21, 2008, 11:23 PM

Here is what the shop plans for a cam..... - Anonymous on Oct 10, 2008, 3:27 PM

Blue Thunder intake - Robert on Oct 10, 2008, 4:41 PM

What part #? - Dan North on Oct 13, 2008, 6:56 PM

Re: Here is what the shop plans for a cam..... - Roo on Oct 10, 2008, 5:04 PM

Re: Here is what the shop plans for a cam..... - Kellypm on Oct 13, 2008, 2:24 PM

Re: Here is what the shop plans for a cam..... - Roo on Oct 13, 2008, 3:30 PM

Re: Here is what the shop plans for a cam..... - Dan North on Oct 13, 2008, 7:06 PM

Re: Here is what the shop plans for a cam..... - kellypm on Oct 14, 2008, 8:22 AM

Re: Here is what the shop plans for a cam..... - Dan North on Oct 14, 2008, 8:50 AM

Re: Here is what the shop plans for a cam..... - kellypm on Oct 14, 2008, 12:07 PM

How was that cam? - JackG on Oct 14, 2008, 3:08 PM

Re: How was that cam? - kellypm on Oct 15, 2008, 5:42 AM

dbl post - Dan North on Oct 13, 2008, 7:06 PM

More $$$ added to the project....aluminum heads then? - Dan North on Oct 23, 2008, 9:45 PM

Question re mid-70s-early 80s era Pro Stock C View Thread - futurattraction on Oct 20, 2008, 5:52 PM

cleveland pro stock pan - gt350hr on Oct 23, 2008, 6:13 PM

Thanks Randy. - futurattraction on Oct 23, 2008, 8:41 PM

sorta OT: B&M C6 valve body question View Thread - Pete on Oct 22, 2008, 6:38 PM

The whole valve body ? - joe on Oct 22, 2008, 7:57 PM

Yep - Pete on Oct 23, 2008, 5:02 PM

well I couldn't tell you then - joe on Oct 23, 2008, 5:19 PM

Crankcase venting View Thread - Dave on Oct 20, 2008, 2:12 PM

Re: Crankcase venting - Anonymous on Oct 20, 2008, 2:45 PM

Re: Crankcase venting - coupe3w on Oct 20, 2008, 3:35 PM

Re: Crankcase venting - Dave on Oct 23, 2008, 9:09 AM

need help with 60 ft time View Thread - rod on Oct 13, 2008, 6:17 PM

Re: need help with 60 ft time - Tony on Oct 13, 2008, 6:50 PM

power band - rod on Oct 13, 2008, 7:32 PM

at the strip - Dan on Oct 13, 2008, 7:41 PM

60ft help - duke on Oct 13, 2008, 7:50 PM

60 ft help - rod on Oct 13, 2008, 8:09 PM

Few tips - Adrian351 on Oct 13, 2008, 10:29 PM

Caltracs - danford1 on Oct 14, 2008, 4:51 AM

cal tracs for sure - steve.k on Oct 14, 2008, 8:09 AM

great info - Anonymous on Oct 14, 2008, 5:47 PM

If you want 60' times - Falcon67 on Oct 14, 2008, 8:41 PM

traction bar article - capri351 on Oct 22, 2008, 3:47 PM

Chi head / rocker question View Thread - Ross on Oct 17, 2008, 7:39 PM

This question - cmf60 on Oct 17, 2008, 8:06 PM

Re: This question - cmf60 on Oct 17, 2008, 8:12 PM

Thanks - Ross on Oct 17, 2008, 8:58 PM

rocker diff. - Dan on Oct 18, 2008, 7:02 AM

That of course is why, the BBC is cheaper - Ross on Oct 18, 2008, 10:14 AM

Re: That of course is why, the BBC is cheaper - Kevin Black on Oct 18, 2008, 10:58 AM

Thanks for the advice - Ross on Oct 18, 2008, 11:35 AM

Heck that aint expensive - Ross on Oct 18, 2008, 11:37 AM

price - Dan on Oct 18, 2008, 2:03 PM

Really depends on geometry at the pushrod end - Ross on Oct 18, 2008, 9:44 PM

geo. at push rod - Dan on Oct 19, 2008, 8:40 AM

Dan I was just simplifying one feature - Ross on Oct 19, 2008, 9:30 AM

Re: Dan I was just simplifying one feature - funcars on Oct 19, 2008, 5:15 PM

Harland Sharp - Falcon67 on Oct 21, 2008, 7:20 AM

Thanks Chris, Brent has his account so I am going to waive off now - Ross on Oct 22, 2008, 10:12 AM

rockers - john on Oct 21, 2008, 3:12 AM

Ware patterns - Miller Mylan on Oct 21, 2008, 4:32 PM

what works - Dan on Oct 21, 2008, 4:48 PM

Can someone with some CHI experience chime in please? View Thread - Brent on Oct 21, 2008, 10:13 AM

I've found answers to my own questions... - Brent on Oct 21, 2008, 10:41 AM

208 manifold - dion on Oct 21, 2008, 2:34 PM

That would be nice... - Brent on Oct 21, 2008, 3:48 PM

Here ya go: - Dustin Rinne on Oct 21, 2008, 8:18 PM

OT C4 problems behind my new cleveland View Thread - Chris Berndt on Oct 15, 2008, 3:21 PM

Re: OT C4 problems behind my new cleveland - Anonymous on Oct 15, 2008, 3:33 PM

Re: OT C4 problems behind my new cleveland - Chris Berndt on Oct 15, 2008, 3:41 PM

Re: OT C4 problems behind my new cleveland - Anonymous on Oct 15, 2008, 4:23 PM

Maybe - Chris Berndt on Oct 15, 2008, 4:43 PM

About 3/8" - cmf60 on Oct 15, 2008, 5:00 PM

Re: About 3/8" - Chris Berndt on Oct 15, 2008, 6:38 PM

The pump works - cmf60 on Oct 16, 2008, 10:47 PM

same thing to me - Bill Gallagher on Oct 15, 2008, 7:30 PM

Re: same thing to me - Chris Berndt on Oct 15, 2008, 7:43 PM

Heres what happened - Chris Berndt on Oct 15, 2008, 8:18 PM

worth noting - Bill Gallagher on Oct 15, 2008, 9:22 PM

If it was - cmf60 on Oct 15, 2008, 9:39 PM

Bells - Miller Mylan on Oct 16, 2008, 10:59 PM

Re: Bells - Anonymous on Oct 17, 2008, 5:45 AM

Do They - Chris Berndt on Oct 17, 2008, 6:23 PM

bellhousings - Bill Gallagher on Oct 18, 2008, 6:02 PM

OK my head hurts - Chris Berndt on Oct 21, 2008, 12:30 PM

Is there - shaneus on Oct 21, 2008, 2:10 PM

Re: OK my head hurts - Dennis on Oct 21, 2008, 2:44 PM

Its commonly done - cmf60 on Oct 21, 2008, 4:47 PM

164 tooth 5 7/8' - Miller Mylan on Oct 21, 2008, 3:48 PM

I will check it out - Chris Berndt on Oct 21, 2008, 5:50 PM

Re: OT C4 problems behind my new cleveland - Anonymous on Oct 21, 2008, 7:00 PM

Yates to Cleveland pics View Thread - cmf60 on Oct 21, 2008, 3:30 AM

Re: Yates to Cleveland pics - Miller Mylan on Oct 21, 2008, 12:02 PM

I chuckle - cmf60 on Oct 21, 2008, 12:37 PM

Set up is important - Miller Mylan on Oct 21, 2008, 4:14 PM

Another Wheelstand Vid View Thread - DragBoss on Oct 19, 2008, 5:14 PM

Re: Another Wheelstand Vid - clevelandstyle on Oct 20, 2008, 4:14 AM

Hey - DragBoss on Oct 21, 2008, 3:03 PM

New Member, Wanted To Introduce Myself View Thread - Brent Lykins on Oct 21, 2008, 5:09 AM

Welcome aboard our merry ship- USS Cleveland... - blizz on Oct 21, 2008, 6:37 AM

Yes I did... - Brent on Oct 21, 2008, 7:32 AM

Re: Yes I did... - Kevin Black on Oct 21, 2008, 9:19 AM

shamless plugs - Dan on Oct 21, 2008, 9:37 AM

If it was a 408 rotating assembly, I may have taken you up on it... - Brent on Oct 21, 2008, 10:07 AM

might have - Dan on Oct 21, 2008, 11:49 AM

Not sure what that is supposed to mean, but thanks. - Brent on Oct 21, 2008, 12:08 PM

Circle track build View Thread - fastimz on Oct 21, 2008, 10:16 AM

Circle Track - DaveMcLain on Oct 21, 2008, 10:50 AM

If the forged crank required a spacer... - Brent on Oct 21, 2008, 11:00 AM

New Tod Block Pix! *dial-up warning* View Thread - Tom Custom on Sep 8, 2008, 5:09 PM

features - Dan on Sep 8, 2008, 5:17 PM

Caps - Jim Sams on Sep 8, 2008, 5:56 PM

Sure can. - Tod on Sep 8, 2008, 6:14 PM

What we've got here is... - Tod on Sep 8, 2008, 6:13 PM

WOW! - Kaz on Sep 8, 2008, 7:17 PM

Dip stick - Falcon67 on Sep 8, 2008, 7:20 PM

Oh Yea - DragBoss on Sep 8, 2008, 8:19 PM

The wait is worth it - Bruce Morris on Sep 10, 2008, 6:21 AM

IMPRESSIVE!!! - Dustin Rinne on Sep 9, 2008, 3:03 PM

Looking good how much and what is del time? - steve on Sep 10, 2008, 3:59 AM

Re: Looking good how much and what is del time? - machstang70 on Sep 10, 2008, 8:36 PM

Pro-Gram splayed 4 bolt main caps - tinman on Sep 14, 2008, 8:31 PM

Any tall blocks - Miller Mylan on Oct 21, 2008, 1:29 AM

Right now... - Tod on Oct 21, 2008, 2:45 AM

Re: Right now... - Kevin Black on Oct 21, 2008, 9:25 AM

Hydraulic roller lifter bleed down View Thread - chris on Oct 17, 2008, 4:56 PM

Re: Hydraulic roller lifter bleed down - Anonymous on Oct 17, 2008, 5:04 PM

part of the click - Dan on Oct 17, 2008, 5:13 PM

the filter is a FramHP1 - chris on Oct 17, 2008, 8:02 PM

Re: Hydraulic roller lifter bleed down - Butch on Oct 17, 2008, 8:33 PM

Fram!?!! auuuughhh! - Mike on Oct 18, 2008, 8:12 AM

oil filters - duke on Oct 18, 2008, 8:25 AM

purolator - Bryan Mappin on Oct 18, 2008, 11:14 AM

Yes I prelubed them - chris on Oct 18, 2008, 11:40 AM

Re: Hydraulic roller lifter bleed down - Anonymous on Oct 18, 2008, 11:32 AM

Fram filters! - Miller Mylan on Oct 21, 2008, 1:08 AM

No luck View Thread - Tony on Oct 17, 2008, 11:17 PM

Must be disapointing for sure - Roo on Oct 18, 2008, 9:48 AM

all that - Dan on Oct 18, 2008, 2:08 PM

I would settle.. - Roo on Oct 18, 2008, 3:40 PM

Re: Must be disapointing for sure - Tony on Oct 18, 2008, 6:18 PM

Re: No luck - Tony on Oct 19, 2008, 12:07 AM

If you get a chance, post a couple pics - Anonymous on Oct 19, 2008, 10:11 AM

Rod - kidv on Oct 19, 2008, 10:16 AM

Re: Rod - Tony on Oct 19, 2008, 2:23 PM

Re: Rod - kidv on Oct 19, 2008, 3:46 PM

Clearances on crank - Tony on Oct 19, 2008, 8:14 PM

I've seen the #1 & 5 so spun and burnt that there was no bearing left! - Roo on Oct 19, 2008, 5:52 PM

I just tore down a 340 - joe on Oct 19, 2008, 6:55 PM

Re: I've seen the #1 & 5 so spun and burnt that there was no bearing left! - Tony on Oct 19, 2008, 8:24 PM

bearings - kidv on Oct 19, 2008, 6:41 PM

Stock oiling system - Miller Mylan on Oct 20, 2008, 9:13 AM

Re: No luck - Anonymous on Oct 19, 2008, 10:34 AM

Re: No luck - kidv on Oct 19, 2008, 11:21 AM

Re: No luck - Anonymous on Oct 19, 2008, 11:48 AM

Decent stock replacement rod - Tony on Oct 19, 2008, 3:17 PM

Re: Decent stock replacement rod - kidv on Oct 19, 2008, 3:44 PM

Re: Decent stock replacement rod - James on Oct 19, 2008, 4:24 PM

the broach cut - tinman on Oct 19, 2008, 5:28 PM

Re: the broach cut - James on Oct 19, 2008, 7:58 PM

A.I.S.I. 5140 is probably little better than 1041H - joe on Oct 19, 2008, 7:03 PM

No way - Falcon67 on Oct 20, 2008, 4:55 AM

Stock replace - Miller Mylan on Oct 20, 2008, 8:10 PM

Machinest's explanation - Tony on Oct 20, 2008, 5:11 PM

uuhhh.... - kidv on Oct 20, 2008, 5:40 PM

He should of said "I don't know for sure" - Roo on Oct 20, 2008, 7:19 PM

Detonation - Miller Mylan on Oct 20, 2008, 8:25 PM

New personal best View Thread - 87boss351 on Oct 20, 2008, 1:20 PM

Re: New personal best - Anonymous on Oct 20, 2008, 2:46 PM

My chance to do it all again..... View Thread - Kevin on Sep 14, 2008, 7:43 AM

I like a 393 in factory iron. n/m - Travis on Sep 14, 2008, 8:50 AM

With 2V heads... - Jimmie Phillips on Sep 14, 2008, 11:21 AM

Re: My chance to do it all again..... - Kevin on Sep 14, 2008, 12:15 PM

Whats wrong with stock 2v heads?? - Kevin on Sep 14, 2008, 12:15 PM

Re: My chance to do it all again..... - Anonymous on Sep 14, 2008, 6:19 PM

Re: My chance to do it all again..... - tinman on Sep 14, 2008, 9:01 PM

Depends on the cam used... - Jimmie Phillips on Sep 15, 2008, 5:11 PM

high nickel rod - dave on Sep 15, 2008, 6:35 PM

How about these heads?.... - Kevin on Sep 15, 2008, 6:52 PM

AFD - Falcon67 on Sep 16, 2008, 8:31 AM

Re: How about these heads?.... - dion on Sep 17, 2008, 2:34 AM

Re: 393 - strokeme on Sep 16, 2008, 6:26 AM

re: your 393 - darren on Oct 19, 2008, 11:19 AM

So, with stock heads, It won't work?? - Kevin on Sep 16, 2008, 7:39 PM

Get the 2Vs ported & call MME - Jimmie Phillips on Sep 16, 2008, 9:23 PM

Not a race car - torquey - Mike on Sep 17, 2008, 4:22 AM

Re: So, with stock heads, It won't work?? - Jimmie Phillips on Sep 17, 2008, 6:34 AM

stroker and 2V heads - Dan on Sep 17, 2008, 10:44 AM

Spend the money on the bottom end. - James P. on Sep 17, 2008, 10:39 AM

the other - Dan on Sep 17, 2008, 10:47 AM

re: 2v heads - strokeme on Sep 17, 2008, 2:00 PM

Re: re: 2v heads - Mike on Sep 17, 2008, 4:25 PM

4V heads would require... - Kevin on Sep 17, 2008, 4:28 PM

power - Dan on Sep 17, 2008, 6:14 PM

my old set up - mike slusher on Sep 17, 2008, 6:22 PM

Re: My chance to do it all again..... - Anonymous on Sep 18, 2008, 11:38 AM

Re: My chance to do it all again..... - Mike on Sep 18, 2008, 7:29 PM

Crack repair - Falcon67 on Sep 19, 2008, 12:10 PM

that top picure is exactly what my crack is.... - Kevin on Sep 21, 2008, 7:14 AM

<< Prev

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Next >>

Clevelands Forever!351Cleveland.net

Clevelands Forever!
351Cleveland.net