Clevelands Forever!
351Cleveland.net

This forum is for the discussion of the US Ford 351 Cleveland, 351M (MODIFIED), 400 and Aussie 302C and 351C engines.

POST MESSAGE___ SEARCH___ CLASSIFIED ADS___ PHOTOS

USEFUL LINKS___ GUITAR AMPS___THE BENCH___MEMBERSHIP

The Cleveland Wiki NEW!

This forum requires membership for posting messages. Anyone can read, but you will have to be a member to post. For instructions on how to apply for membership, go here. It's easy and free!

Info on the New Tod Buttermore Cleveland Block

Visitors in this forum in the last 10 minutes: 17 Visitors
gt350hr, machoneman, tinman351, 14 guests

Not logged in | Login | Create Account

Search "Engine Build Forum" Post now!

Smaller timing chain View Thread - Tony on Nov 23, 2008, 9:33 AM

Re: Smaller timing chain - tinman on Nov 23, 2008, 1:17 PM

I have one. - Bjones on Nov 23, 2008, 1:57 PM

Still available - coupe3w on Nov 23, 2008, 2:05 PM

extra character on link - tinman on Nov 23, 2008, 2:16 PM

So would the new Aluminum block be ok for street use?? View Thread - JeffJ on Oct 22, 2008, 12:24 PM

Re: So would the new Aluminum block be ok for street use?? - coupe3w on Oct 22, 2008, 3:44 PM

I sure hope so - mike on Oct 22, 2008, 8:06 PM

wheel or crank HP - Joel on Oct 24, 2008, 1:18 PM

Should be fine. - Tod on Oct 23, 2008, 1:37 PM

How heavy is it - Miller Mylan on Oct 23, 2008, 10:33 PM

A raw casting... - Tod on Oct 24, 2008, 3:29 AM

4.125 bore - Miller Mylan on Oct 24, 2008, 12:41 PM

4.125 bore - Miller Mylan on Oct 24, 2008, 12:47 PM

The sleeves... - Tod on Oct 25, 2008, 4:03 AM

Aluminum blocks - Luc John Feilla on Oct 31, 2008, 8:18 AM

The same guy... - Tod on Nov 1, 2008, 3:06 AM

New Cleveland blocks - Luc John Feilla on Nov 6, 2008, 11:17 AM

Re: New Cleveland blocks - Anonymous on Nov 6, 2008, 2:53 PM

Having trouble... - Tod on Nov 7, 2008, 3:24 AM

Getting in on the alloy block action - Dan on Nov 12, 2008, 12:22 AM

Re: Getting in on the alloy block action - Miller Mylan on Nov 15, 2008, 12:25 PM

please email me - Tod on Nov 20, 2008, 3:16 AM

email sent, awaiting reply cheers mate - Dan on Nov 23, 2008, 12:13 PM

Crower treated me right View Thread - funcars on Nov 21, 2008, 11:00 PM

Good to know - Chris on Nov 22, 2008, 12:14 AM

Dealing with Crower - DaveMcLain on Nov 22, 2008, 7:04 AM

Has anyone used the Crower rebuild service? - Roo on Nov 22, 2008, 8:39 AM

Polished con rods View Thread - Tony on Nov 17, 2008, 9:13 PM

pin area - Dan on Nov 17, 2008, 10:27 PM

Thanks Dan - Tony on Nov 17, 2008, 10:35 PM

polishing - Miller Mylan on Nov 18, 2008, 12:19 AM

test - Dan on Nov 18, 2008, 6:37 AM

Stock rods.. - Randy on Nov 18, 2008, 6:52 PM

Rods? - DragBoss on Nov 18, 2008, 7:17 PM

Eagle - Falcon67 on Nov 18, 2008, 9:15 PM

Some I beams.... - Randy on Nov 19, 2008, 7:45 AM

351C h-beams..... - ford429cjlover on Nov 21, 2008, 8:35 PM

Barnett - Anonymous on Nov 21, 2008, 8:56 PM

block is split at cly #8 - Realistic options? View Thread - mike on Nov 21, 2008, 4:38 PM

Buy Tod's Block "Bosszillia" - DragBoss on Nov 21, 2008, 5:01 PM

It depends........ - DAVID on Nov 21, 2008, 5:27 PM

Nothing radical - mike on Nov 21, 2008, 5:42 PM

Sleeves are ok for.... - Randy on Nov 21, 2008, 6:09 PM

Roller rocker question... View Thread - futurattraction on Mar 19, 2002, 7:48 PM

The seller is describing the color... - futurattraction on Mar 19, 2002, 7:59 PM

Ooops wrong Angus... - blizz on Nov 20, 2008, 1:56 PM

Harland Sharps Interested? - DragBoss on Nov 20, 2008, 6:18 PM

Rockers - Fastimz on Nov 21, 2008, 3:47 AM

Re: The seller is describing the color... - James on Nov 20, 2008, 7:41 PM

Harland Sharps - DragBoss on Nov 21, 2008, 5:39 PM

harland sharps and stock v/c View Thread - dave on Nov 19, 2008, 4:15 PM

they clear, got a set on the Bronco - blizz on Nov 19, 2008, 6:32 PM

mosquitos - Andy on Nov 20, 2008, 12:46 PM

Harland Sharp - Anonymous on Nov 21, 2008, 5:27 PM

starter question View Thread - matt on Nov 21, 2008, 1:22 PM

mini starter - Randy on Nov 21, 2008, 3:17 PM

Re: mini starter - DragBoss on Nov 21, 2008, 4:42 PM

Bud Moore Ram Box View Thread - Anonymous on Oct 25, 2008, 6:56 PM

Re: Bud Moore Ram Box - wydendorf on Oct 25, 2008, 7:37 PM

Re: Bud Moore Ram Box - Anonymous on Oct 26, 2008, 1:21 PM

Bud box - Dan on Oct 26, 2008, 1:29 PM

Bud box - Randy on Oct 27, 2008, 1:17 PM

Maxi fouled plugs - Jim Sams on Oct 26, 2008, 3:29 PM

puddles - Dan on Oct 26, 2008, 3:35 PM

Re: puddles - Anonymous on Oct 26, 2008, 5:05 PM

puddles - Randy on Oct 27, 2008, 1:21 PM

bud moore box - pauly on Nov 18, 2008, 4:26 PM

Bud Moore Ram box - Randy on Oct 27, 2008, 1:03 PM

Re: Bud Moore Ram Box - Anonymous on Oct 27, 2008, 1:09 PM

391 locker - Randy on Oct 27, 2008, 1:47 PM

Re: 391 locker - Anonymous on Oct 27, 2008, 2:50 PM

The box - J5im Sams on Oct 27, 2008, 3:02 PM

391 locker - randy on Oct 27, 2008, 3:52 PM

4x2 - Dan on Oct 27, 2008, 4:54 PM

4x2 - Randy on Oct 28, 2008, 7:58 AM

Bud Moore manifold - pauly on Nov 18, 2008, 4:37 PM

Yea - DragBoss on Nov 18, 2008, 5:19 PM

Mini vs Maxi - Randy on Nov 18, 2008, 6:25 PM

Randy? - DragBoss on Nov 18, 2008, 7:39 PM

Hey Tim.... - Randy on Nov 19, 2008, 7:21 AM

Maxiplenum with A3s - Kelly on Nov 19, 2008, 5:01 AM

Re: Maxiplenum with A3s - pauly on Nov 21, 2008, 1:57 AM

Head Options - Anonymous on Nov 21, 2008, 4:58 AM

Re: Head Options - Anonymous on Nov 21, 2008, 1:49 PM

Was there any torque down low? - Roo on Nov 21, 2008, 3:48 PM

Re: Was there any torque down low? - Anonymous on Nov 21, 2008, 4:37 PM

Maiden Voyage View Thread - Chris Berndt on Nov 20, 2008, 3:03 PM

Too much shot not, enough timing - Roo on Nov 20, 2008, 3:25 PM

Re: Too much shot not, enough timing - Chris Berndt on Nov 20, 2008, 3:30 PM

I've used it, but many years ago - Roo on Nov 20, 2008, 3:35 PM

Re: I've used it, but many years ago - Chris Berndt on Nov 20, 2008, 3:51 PM

factory single point cleveland dizzy ? - joe on Nov 20, 2008, 3:55 PM

Re: factory single point cleveland dizzy ? - Chris Berndt on Nov 20, 2008, 4:04 PM

1.75s - allenman on Nov 20, 2008, 4:11 PM

Re: 1.75s - Chris Berndt on Nov 20, 2008, 4:47 PM

3.50's - Roger Line on Nov 20, 2008, 5:55 PM

Re: Maiden Voyage - Anonymous on Nov 20, 2008, 5:46 PM

acc pump - Chris Berndt on Nov 20, 2008, 6:12 PM

Re: Maiden Voyage - Anonymous on Nov 20, 2008, 6:23 PM

Re: Maiden Voyage - chris on Nov 20, 2008, 7:04 PM

What shooter - Anonymous on Nov 20, 2008, 7:25 PM

Re: Maiden Voyage - Anonymous on Nov 20, 2008, 7:40 PM

Would it be worth it - chris berndt on Nov 21, 2008, 5:51 AM

Re: Maiden Voyage - Anonymous on Nov 21, 2008, 7:13 AM

auto trans? - tinman on Nov 21, 2008, 9:52 AM

yep auto - chris on Nov 21, 2008, 10:40 AM

OT help needed View Thread - Chris Berndt on Nov 19, 2008, 1:49 PM

Re: OT help needed - Anonymous on Nov 20, 2008, 9:27 AM

It is the off topic forum - TommyK on Nov 20, 2008, 11:09 AM

E2ZM-6049-B3 Yates heads View Thread - Roger Line on Nov 6, 2008, 3:15 PM

Re: E2ZM-6049-B3 Yates heads - Kevin Black on Nov 7, 2008, 12:56 AM

Don't know - Roger Line on Nov 7, 2008, 2:11 PM

History - Dan on Nov 7, 2008, 5:58 PM

? - Roger Line on Nov 7, 2008, 6:25 PM

do the chambers look exactly like a 4v close chamber head ? - joe on Nov 7, 2008, 6:42 PM

got me wonderin now - Roger Line on Nov 7, 2008, 7:10 PM

yes - joe on Nov 7, 2008, 7:29 PM

See Dan Jones: - B... on Nov 8, 2008, 6:45 AM

some pics (if I can send them right) - Roger Line on Nov 8, 2008, 9:19 AM

Look like B351's to me - Kevin Black on Nov 8, 2008, 9:32 AM

intake port ht - Dan on Nov 8, 2008, 11:17 AM

E2ZM-6049-B3/ M6049-B351 - Randy on Nov 8, 2008, 10:49 AM

right on - Roger Line on Nov 8, 2008, 11:14 AM

are the valves the same size - Tony Marbury on Nov 8, 2008, 12:49 PM

I will check - Roger Line on Nov 8, 2008, 1:50 PM

A3;s - DragBoss on Nov 8, 2008, 5:48 PM

on e-bay - Roger Line on Nov 16, 2008, 1:33 PM

OK for the forum members, Whats your reserve. N/M - Chris Berndt on Nov 16, 2008, 4:17 PM

;) - Roger Line on Nov 16, 2008, 4:50 PM

Intake port height? - Roger Line on Nov 16, 2008, 6:59 PM

but my Offenhauser 360 dgree will not! - Roger Line on Nov 16, 2008, 7:10 PM

nothing like knowing - Dan on Nov 16, 2008, 8:08 PM

that's the thing?! - Roger Line on Nov 16, 2008, 8:29 PM

pics again - Roger Line on Nov 16, 2008, 8:46 PM

Ports - raised? - Will Kooiman on Nov 17, 2008, 5:34 AM

nice to know - Dan on Nov 17, 2008, 6:07 AM

I'm learning......... - Roger Line on Nov 17, 2008, 2:48 PM

Roof raised .100 IIRC - Jim Sams on Nov 17, 2008, 3:35 PM

Pics coming - Will Kooiman on Nov 17, 2008, 4:34 PM

pic's - Dan on Nov 17, 2008, 6:07 PM

more than .100" - Dan on Nov 17, 2008, 6:14 PM

I dislike being used as an appraisal service for commercial purposes - joe on Nov 17, 2008, 8:17 PM

Not my intent; - Roger Line on Nov 17, 2008, 8:57 PM

intent - Dan on Nov 17, 2008, 10:22 PM

how much you have or the means used to obtain them is not the point - joe on Nov 18, 2008, 6:29 AM

Respectfully Joe.... - cmf60 on Nov 18, 2008, 1:50 PM

It's worth whatever someone is willing to pay - joe on Nov 18, 2008, 2:45 PM

actually.... - Roger Line on Nov 18, 2008, 5:01 PM

that seems fine - joe on Nov 18, 2008, 5:16 PM

Yes Joe... - cmf60 on Nov 18, 2008, 6:03 PM

conclusion ? - Dan on Nov 18, 2008, 8:15 PM

But...... - cmf60 on Nov 19, 2008, 4:41 AM

why - Dan on Nov 19, 2008, 7:44 AM

Re: why - cmf60 on Nov 19, 2008, 2:13 PM

Lets move on. - Tom Custom on Nov 19, 2008, 3:40 PM

need help valvetrain adjustment View Thread - Justin on Nov 18, 2008, 6:02 PM

all I could find - Bill Gallagher on Nov 18, 2008, 7:03 PM

pushrod length - Jerry on Nov 19, 2008, 9:14 AM

Re: need help valvetrain adjustment - funcars on Nov 19, 2008, 11:30 AM

What he said - Falcon67 on Nov 19, 2008, 12:50 PM

Trick Flow Cleveland heads View Thread - Jim Sams on Nov 8, 2008, 7:32 AM

Re: Trick Flow Cleveland heads - Kevin Black on Nov 8, 2008, 7:53 AM

close - Dan on Nov 8, 2008, 9:05 AM

Damn, can't see the ports in that pic - Roo on Nov 8, 2008, 9:00 AM

TF heads - Dan on Nov 8, 2008, 11:24 AM

TFS - Miller Mylan on Nov 8, 2008, 11:47 AM

That's the only photo I have found. - Jim Sams on Nov 8, 2008, 12:29 PM

TFS Heads - Rich Carlisle on Nov 11, 2008, 6:33 AM

SEMA - Trick Flow heads - Falcon67 on Nov 11, 2008, 8:24 AM

neat if..... - Roger on Nov 11, 2008, 8:50 AM

More Info from Trick Flow - Jim Sams on Nov 11, 2008, 9:01 AM

What about a set of CNC heads - Miller Mylan on Nov 11, 2008, 11:16 AM

domes..... - Randy on Nov 11, 2008, 1:21 PM

Re: SEMA - Trick Flow heads - Rich Carlisle on Nov 12, 2008, 8:40 AM

Re: Trick Flow Cleveland heads - Anonymous on Nov 11, 2008, 10:36 AM

Price - Falcon67 on Nov 11, 2008, 2:14 PM

Re: Price - Anonymous on Nov 11, 2008, 2:47 PM

Flow figures / other - Falcon67 on Nov 12, 2008, 8:55 AM

Re: Flow figures / other - Anonymous on Nov 12, 2008, 11:27 AM

Dyno - Falcon67 on Nov 12, 2008, 12:00 PM

Flow - Dan on Nov 12, 2008, 11:48 AM

Flow comparo to Chi 2v - Roo on Nov 12, 2008, 12:10 PM

Good to see - cmf60 on Nov 12, 2008, 3:04 PM

how about a good new intake - Miller Mylan on Nov 12, 2008, 4:45 PM

One that will fit under a hood....n/m - xafalcongs on Nov 13, 2008, 7:46 PM

Get a Funnelweb and a saber saw LOL n/m - Falcon67 on Nov 14, 2008, 8:56 AM

you forgot the - Dan on Nov 14, 2008, 8:59 AM

TFS EFI.... - xafalcongs on Nov 15, 2008, 5:17 AM

Now we just need.... - xafalcongs on Nov 15, 2008, 8:51 AM

blocks waiting on the pour - tinman on Nov 15, 2008, 11:00 AM

TFS uppers - xafalcongs on Nov 15, 2008, 3:26 PM

Machining - Ben Sinclair on Nov 19, 2008, 10:35 AM

other thought on blowers View Thread - Anonymous on Nov 16, 2008, 11:25 AM

My .02$ - Travis on Nov 16, 2008, 1:07 PM

cool - Dan on Nov 16, 2008, 2:47 PM

Re: other thought on blowers - tinman on Nov 16, 2008, 4:28 PM

here is some pics of the recipets and other stuff - deleted on Nov 17, 2008, 4:39 AM

Prep For Blower - DaveMcLain on Nov 17, 2008, 5:21 AM

Procharger - John on Nov 17, 2008, 12:34 PM

Care to share pictures? - Jim on Nov 17, 2008, 5:40 PM

the way - Dan on Nov 18, 2008, 6:29 AM

crank hubs - tinman on Nov 17, 2008, 9:01 PM

blower brace - John on Nov 18, 2008, 1:36 AM

Great - DragBoss on Nov 18, 2008, 6:13 AM

Run A Hub - DaveMcLain on Nov 18, 2008, 6:56 AM

procharger - John on Nov 18, 2008, 11:08 AM

Re: procharger - Q-CodeMach on Nov 18, 2008, 4:55 PM

Re: procharger - Jim on Nov 18, 2008, 4:59 PM

afr's - John on Nov 18, 2008, 5:15 PM

alittle outside eye candy - John on Nov 18, 2008, 5:20 PM

NICE fab work!! Nice rides!! - Travis on Nov 19, 2008, 3:51 AM

8psi - John on Nov 19, 2008, 8:02 AM

O/T anyone that knows about Falcons View Thread - Travis on Nov 16, 2008, 1:22 PM

Has to be a 66 I found sum pics n/m - Travis on Nov 16, 2008, 1:39 PM

If it's a 66 - Falcon67 on Nov 17, 2008, 3:20 PM

Dearborn Classics has some ... - danford1 on Nov 18, 2008, 11:48 AM

Falcon FYI - Falcon67 on Nov 18, 2008, 2:14 PM

Thanks for the info - Travis on Nov 19, 2008, 3:56 AM

2010 Mustang on Speed TONIGHT View Thread - Jay M on Nov 18, 2008, 11:01 AM

Here is more - danford1 on Nov 18, 2008, 11:29 AM

Saw that last night - Falcon67 on Nov 18, 2008, 2:16 PM

Idle Speed Changes View Thread - hawkxr7 on Nov 12, 2008, 9:12 PM

rpm drop - Dan on Nov 13, 2008, 4:49 AM

Strange - Hawkxr7 on Nov 13, 2008, 8:23 AM

Re: Idle Speed Changes - Fordwiser on Nov 13, 2008, 2:20 PM

Try this - danford1 on Nov 13, 2008, 7:39 PM

shaft bushings - Miller Mylan on Nov 16, 2008, 10:06 AM

New Base Plate is Expensive - hawkxr7 on Nov 16, 2008, 5:01 PM

local carb rebuilder - duke on Nov 16, 2008, 6:55 PM

Before you Buy a New Baseplate - DaveMcLain on Nov 17, 2008, 5:26 AM

possible TC damage View Thread - Bill Gallagher on Nov 14, 2008, 7:16 PM

Send it back - Falcon67 on Nov 14, 2008, 8:25 PM

Re: possible TC damage - kidv on Nov 15, 2008, 4:47 AM

reverse flow - Dan on Nov 15, 2008, 7:00 AM

Re: reverse flow - kidv on Nov 15, 2008, 7:44 AM

TQ send back - Dan on Nov 15, 2008, 10:11 AM

Don't waste you're money..... - Randy on Nov 15, 2008, 6:34 PM

Re: Don't waste you're money..... - Bill Gallagher on Nov 16, 2008, 6:35 AM

What brand is this?? View Thread - Chris Berndt on Nov 15, 2008, 4:46 PM

could be.... - Anonymous on Nov 15, 2008, 5:15 PM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Next >>

Clevelands Forever!351Cleveland.net

Clevelands Forever!
351Cleveland.net