Clevelands Forever!
351Cleveland.net

This forum is for the discussion of the US Ford 351 Cleveland, 351M (MODIFIED), 400 and Aussie 302C and 351C engines.

POST MESSAGE___ SEARCH___ CLASSIFIED ADS___ PHOTOS

USEFUL LINKS___ GUITAR AMPS___THE BENCH___MEMBERSHIP

The Cleveland Wiki NEW!

This forum requires membership for posting messages. Anyone can read, but you will have to be a member to post. For instructions on how to apply for membership, go here. It's easy and free!

Info on the New Tod Buttermore Cleveland Block

Visitors in this forum in the last 10 minutes: 17 Visitors
gt350hr, machoneman, tinman351, 14 guests

Not logged in | Login | Create Account

Search "Engine Build Forum" Post now!

Wheelstand with a Cleveland View Thread - DragBoss on Oct 12, 2008, 6:38 PM

Re: Wheelstand with a Cleveland - Anonymous on Oct 12, 2008, 6:50 PM

Re: Wheelstand with a Cleveland - Keith Hartley on Oct 12, 2008, 7:02 PM

I've always liked those cars - J. E. Thatcher on Oct 12, 2008, 7:04 PM

Re: Wheelstand with a Cleveland - clevelandstyle on Oct 12, 2008, 7:50 PM

Looked like Summit Motorsports Park - Basket Case on Oct 12, 2008, 8:51 PM

I see - clevelandstyle on Oct 13, 2008, 4:17 AM

Norwalk - DragBoss on Oct 13, 2008, 7:31 AM

Re: Norwalk - Jay M on Oct 13, 2008, 8:01 PM

Re: Norwalk - DragBoss on Oct 14, 2008, 7:48 AM

Dragboss that car rules - steve.k on Oct 14, 2008, 8:18 AM

Another Wheelstand Vid ? - DragBoss on Oct 14, 2008, 4:10 PM

bring it on - clevelandstyle on Oct 14, 2008, 4:55 PM

Re: Wheelstand with a Cleveland - Gerahead on Oct 15, 2008, 6:08 PM

Re: Wheelstand with a Cleveland - DragBoss on Oct 16, 2008, 3:36 PM

Re: Wheelstand with a Cleveland - Gerahead on Oct 16, 2008, 6:19 PM

Go Tim !!! - James Willett on Oct 17, 2008, 5:48 AM

Thanks - DragBoss on Oct 18, 2008, 4:11 PM

Excellent !! - Earl Nagle on Oct 18, 2008, 5:22 PM

C302 vs C3 Yates exhaust port configuration? View Thread - Kevin Black on Oct 18, 2008, 11:03 AM

SVO or Yates - Dan on Oct 18, 2008, 2:06 PM

Dan - cmf60 on Oct 18, 2008, 2:32 PM

early A3 - Dan on Oct 18, 2008, 3:04 PM

Crack in valve guides View Thread - Dave on Oct 17, 2008, 7:57 PM

Re: Crack in valve guides - cmf60 on Oct 18, 2008, 1:40 AM

Re: Crack in valve guides - Dave on Oct 18, 2008, 7:14 AM

Fun Ford Weekend Ennis Tx View Thread - Chris Berndt on Oct 16, 2008, 7:21 PM

Re: Fun Ford Weekend Ennis Tx - allenman on Oct 16, 2008, 9:41 PM

spec - Chris Berndt on Oct 17, 2008, 6:29 PM

Nascar Block? - Chris Berndt on Oct 18, 2008, 6:11 AM

East Coast Drag Times Hall of Fame ? View Thread - machstang70 on Oct 16, 2008, 5:59 PM

Re: East Coast Drag Times Hall of Fame ? - kidv on Oct 17, 2008, 2:01 PM

Re: East Coast Drag Times Hall of Fame ? - machstang70 on Oct 17, 2008, 6:45 PM

Who says Clevelands don't stack up? View Thread - John on Oct 12, 2008, 7:25 PM

Re: Who says Clevelands don't stack up? - jak on Oct 13, 2008, 3:23 AM

Re: Who says Clevelands don't stack up? - John on Oct 13, 2008, 5:34 AM

Re: Who says Clevelands don't stack up? - Warren on Oct 13, 2008, 11:45 AM

Re: Who says Clevelands don't stack up? - Joe1969 on Oct 14, 2008, 7:56 PM

Motor pig - Falcon67 on Oct 14, 2008, 8:32 PM

Texas is a big place, - John on Oct 17, 2008, 7:04 AM

Re: Texas is a big place, - Chris Berndt on Oct 17, 2008, 6:45 PM

Re: Who says Clevelands don't stack up? - Anonymous on Oct 17, 2008, 1:09 PM

Flat tappet, Rollar tappet, Mechanical, Hydraulic Cams View Thread - Steve Andrews on Oct 16, 2008, 2:52 PM

Re: Flat tappet, Rollar tappet, Mechanical, Hydraulic Cams - kidv on Oct 16, 2008, 3:16 PM

cam pick - Dan on Oct 16, 2008, 8:38 PM

My 4 cents (inflation) - danford1 on Oct 16, 2008, 8:50 PM

roller advantages - Miller Mylan on Oct 16, 2008, 10:48 PM

Ford Race and Show at Mir Budd Creek Oct. 24-26 View Thread - James Willett on Oct 16, 2008, 2:07 PM

VR-1 View Thread - Chris Berndt on Oct 7, 2008, 7:21 AM

Re: VR-1 - coupe3w on Oct 7, 2008, 7:33 AM

springs - Chris Berndt on Oct 7, 2008, 8:36 AM

Don't try it with the inner springs... - James P. on Oct 7, 2008, 8:43 AM

Out they go!! - Chris Berndt on Oct 7, 2008, 8:51 AM

remove the inner springs - Miller Mylan on Oct 7, 2008, 9:29 AM

Re: Out they go!! - coupe3w on Oct 7, 2008, 9:39 AM

Re: Out they go!! - Steve on Oct 8, 2008, 5:15 AM

Crower Cool Faced lifter - Tony on Oct 7, 2008, 1:24 PM

lifters - Chris Berndt on Oct 7, 2008, 7:41 PM

Re: lifters - Tony on Oct 7, 2008, 8:37 PM

"cool face" Lifters - Falcon67 on Oct 7, 2008, 8:42 PM

Lifter? Oil restrictor kit. - Chris Berndt on Oct 8, 2008, 5:47 AM

Re: Lifter? Oil restrictor kit. - Tony on Oct 8, 2008, 7:07 AM

Re: Lifter? Oil restrictor kit. - Chris Berndt on Oct 8, 2008, 7:18 AM

VR-1 - Falcon67 on Oct 8, 2008, 7:34 AM

O'reilys - Chris Berndt on Oct 8, 2008, 7:43 AM

Are these new solid lifters worth the money - Miller Mylan on Oct 8, 2008, 12:52 PM

Re: Are these new solid lifters worth the money - Tony on Oct 8, 2008, 2:07 PM

Isky - Falcon67 on Oct 8, 2008, 8:27 PM

E.O.S. Help!!! - Chris Berndt on Oct 9, 2008, 9:25 AM

Re: E.O.S. Help!!! - Chris W on Oct 9, 2008, 10:16 AM

Ok - Chris Berndt on Oct 9, 2008, 10:23 AM

Re: Ok - Chris W on Oct 9, 2008, 11:43 AM

sounds good - Chris Berndt on Oct 9, 2008, 12:28 PM

Good luck.. - James P. on Oct 9, 2008, 12:59 PM

pass up sex? - Matt on Oct 9, 2008, 1:14 PM

Damn motor can wait - Falcon67 on Oct 9, 2008, 1:26 PM

not recomended as an engine oil additive - Falcon67 on Oct 9, 2008, 1:25 PM

IT LIVES !!!!!!!!!!!!!!! - Chris Berndt on Oct 13, 2008, 8:14 PM

Re: IT LIVES !!!!!!!!!!!!!!! - Roo on Oct 14, 2008, 10:59 AM

Thanks - Chris Berndt on Oct 14, 2008, 11:06 AM

No throttle stop - Roo on Oct 14, 2008, 12:01 PM

Just kidding - Chris Berndt on Oct 14, 2008, 12:23 PM

Do you have a rev limiter? - James P. on Oct 14, 2008, 2:15 PM

Break in - Falcon67 on Oct 14, 2008, 1:02 PM

PUT THE INNERS BACK IN - clevochild on Oct 14, 2008, 1:23 PM

Yes Sir - Chris Berndt on Oct 14, 2008, 2:51 PM

Crower Cool Face - 71T500 on Oct 14, 2008, 7:13 PM

30 million dollar question - Anonymous on Oct 15, 2008, 8:34 AM

Lifters - Falcon67 on Oct 15, 2008, 9:07 AM

Re: Lifters - James on Oct 15, 2008, 7:38 PM

302 Boss Piston View Thread - TMeyer Inc on Oct 8, 2008, 9:11 PM

suggestions - Duke on Oct 8, 2008, 11:03 PM

Boss 331 pistons off the shelf - Randy on Oct 9, 2008, 2:20 PM

wish list...347c - Brad Ford on Oct 9, 2008, 5:34 AM

probe # 14758 - duke on Oct 11, 2008, 6:04 PM

Nice! - bford on Oct 13, 2008, 6:32 PM

Small dome please - Andy on Oct 9, 2008, 5:19 PM

Re: 302 Boss Piston - James on Oct 9, 2008, 8:00 PM

thanks Randy - Duke on Oct 9, 2008, 8:26 PM

Boss pistons - Randy on Oct 10, 2008, 10:12 AM

Re: Boss pistons - James on Oct 11, 2008, 10:55 AM

TA b302's had 5.315 rods - joe on Oct 11, 2008, 4:50 PM

Boss pistons - Dan on Oct 10, 2008, 12:06 AM

cast or forged - Randy on Oct 10, 2008, 2:57 PM

who makes - Dan on Oct 10, 2008, 3:47 PM

Piston material, Manufacture & $$$ - TMeyer on Oct 10, 2008, 4:28 PM

Nobody be deletin' nuthin' in this thread. - Tom Custom on Oct 10, 2008, 6:45 PM

T-Y - TMeyer Inc on Oct 15, 2008, 4:54 PM

351C pinging View Thread - Dave on Oct 11, 2008, 10:06 PM

pinging - Andy on Oct 11, 2008, 10:55 PM

Plausible - Dave on Oct 12, 2008, 10:49 AM

Re: 351C pinging - tinman on Oct 11, 2008, 11:05 PM

Re: 351C pinging - Dave on Oct 12, 2008, 10:34 AM

Are you filling up with the finest petroleum distalite? - Roo on Oct 11, 2008, 11:56 PM

Re: Are you filling up with the finest petroleum distalite? - Dave on Oct 12, 2008, 10:35 AM

Re: 351C pinging - Anonymous on Oct 12, 2008, 8:27 AM

Re: 351C pinging - Dave on Oct 12, 2008, 10:38 AM

pinging - steve.k on Oct 12, 2008, 8:59 AM

No need for premium in such a build. - Tom Custom on Oct 12, 2008, 9:50 AM

Re: No need for premium in such a build. - Dave on Oct 12, 2008, 10:41 AM

Well, it sounds like a lean condition. - Tom Custom on Oct 12, 2008, 11:46 AM

where is you vacuum coming from - steve.k on Oct 12, 2008, 3:34 PM

Re: 351C pinging - Joel on Oct 12, 2008, 4:10 PM

Re: 351C pinging - Brad Smith on Oct 12, 2008, 10:17 PM

get it figured - steve.k on Oct 14, 2008, 8:11 AM

Outta town... - Dave on Oct 14, 2008, 7:49 PM

Purported 351C NASCAR Block Photos View Thread - Curt on Dec 17, 2007, 5:44 PM

Photos of Block - Curt on Dec 17, 2007, 5:51 PM

Heads? - Kelly on Dec 17, 2007, 6:56 PM

ProComp Heads-Raw castings - Curt on Dec 17, 2007, 7:20 PM

The actual pix in here (dial-up warning) - Tom Custom on Dec 17, 2007, 7:13 PM

pic shows - Dan on Dec 18, 2007, 6:31 AM

Other Castings? - Jim Sams on Dec 18, 2007, 6:49 AM

SK code NASCAR Block Rear Axle Ratio? - C urt Kellogg on Jul 8, 2008, 5:50 PM

Habbits=Gears - Chris Berndt on Jul 8, 2008, 6:47 PM

Re: Purported 351C NASCAR Block Photos - Dan Jones on Dec 18, 2007, 8:51 AM

I think Joe had an SK block, or he was thinking about buying one.. - Roo on Dec 19, 2007, 10:11 AM

Heres a SK block post with cylinder wall thickness - Roo on Dec 19, 2007, 1:09 PM

with those numbers - Dan on Dec 19, 2007, 4:09 PM

2 bolt nascar blocks - Pauly on Dec 22, 2007, 3:56 AM

distributor bore differences - steve on Jul 10, 2008, 2:46 AM

let's revisit an oldie but a goodie here - joe on Mar 1, 2008, 8:26 PM

No Foundry Mark - Curt on Mar 2, 2008, 1:55 PM

good luck - russell on Jul 9, 2008, 2:13 AM

RE: good luck - Dan on Jul 10, 2008, 12:28 PM

Looks like thePro-Comps are gaining in popularity1? - C urt K ellogg on Aug 5, 2008, 5:14 PM

Going to the Dyno on Monday 10/20/08 - Curt on Oct 14, 2008, 5:19 PM

Missing 302c View Thread - James on Oct 12, 2008, 7:57 PM

No other way - Roo on Oct 12, 2008, 9:42 PM

Re: missing 302 - Nathan on Oct 13, 2008, 2:13 AM

Re: missing 302 - James on Oct 13, 2008, 9:03 PM

not a problem ??? - Dan on Oct 13, 2008, 3:09 AM

Re: Missing 302c - jak on Oct 13, 2008, 3:12 AM

looking for a good alternative PCV and Breather View Thread - mike on Oct 13, 2008, 1:56 PM

D3ZE 4V heads(w/2V valves) on a 400? View Thread - Thomas on Sep 22, 2008, 7:50 PM

4V-2V-400 - duke on Sep 22, 2008, 8:09 PM

they're good - Glenn on Sep 24, 2008, 3:58 AM

Up the valve size - Andy on Sep 23, 2008, 4:46 PM

Would it hurt flow to use the 400 intake with smaller runners? - Thomas on Sep 23, 2008, 5:57 PM

Re: Would it hurt flow to use the 400 intake with smaller runners? - Mike on Sep 24, 2008, 4:10 AM

D3ZE Heads - Randy on Oct 13, 2008, 9:39 AM

Another Odd C intake on Ebay View Thread - Vic on Sep 25, 2008, 9:10 AM

Already wiped by Ebay . . . - Radchero on Sep 25, 2008, 9:38 AM

Chopped the link try this - Vic on Sep 25, 2008, 9:56 AM

Re: Chopped the link try this - Anonymous on Sep 25, 2008, 4:55 PM

Not to rare - Miller Mylan on Sep 25, 2008, 7:53 PM

I hope they are expensive! - Sportsroof on Sep 26, 2008, 1:16 AM

Aluminum intakes - George Pence on Sep 26, 2008, 6:46 AM

manifolds - Dan on Sep 26, 2008, 3:22 PM

DOAE-L aluminum intake - Randy on Oct 13, 2008, 9:31 AM

Rare enough... - Pete on Sep 28, 2008, 5:55 PM

Weekend Index Races View Thread - Keith on Oct 13, 2008, 7:20 AM

Two new cleveland heads View Thread - KBR on Oct 7, 2008, 11:58 AM

Re: Two new cleveland heads - peisley kevin on Oct 8, 2008, 7:17 PM

kaase heads - steve.k on Oct 12, 2008, 3:37 PM

OT, difference between a 69 302 and a 95 302 View Thread - Lenny on Oct 11, 2008, 7:06 AM

minimal differences - duke on Oct 11, 2008, 8:40 AM

Re: minimal differences - coupe3w on Oct 11, 2008, 8:55 AM

Older 302 blocks are thicker - Mike on Oct 11, 2008, 1:14 PM

prior to 1970 they were 35,000 psi tensile strength (G35) - joe on Oct 11, 2008, 4:33 PM

Tim meyer bored an '88 302 block 100 over... - blizz on Oct 11, 2008, 6:04 PM

that one was only .1665 to begin with - joe on Oct 11, 2008, 7:33 PM

Knew about the roller cam - Lenny on Oct 11, 2008, 8:08 PM

Poor quality blocks - Miller Mylan on Oct 11, 2008, 9:35 PM

Re: Poor quality blocks - lawrence coppola on Oct 12, 2008, 2:33 AM

Interchangeable - DaveMcLain on Oct 12, 2008, 2:35 PM

Harmonic Balancer View Thread - Dave on Oct 5, 2008, 8:57 AM

So nobody knows????? - Me again on Oct 6, 2008, 9:40 PM

Re: Harmonic Balancer - Miller Mylan on Oct 6, 2008, 10:39 PM

Balancer - Darrin on Oct 8, 2008, 8:46 AM

They are different. - J. E. Thatcher on Oct 8, 2008, 12:23 PM

351W vs351C dampner - Randy on Oct 9, 2008, 1:34 PM

why does fluidampr list same unit for 351c and 351w? - jeffj on Oct 9, 2008, 4:20 PM

fluid damper - Randy on Oct 9, 2008, 4:31 PM

I agree I don't like spooky dampers - joe on Oct 9, 2008, 4:36 PM

for what it's worth - Duke on Oct 9, 2008, 8:34 PM

Re: for what it's worth - Kevin Black on Oct 10, 2008, 1:06 PM

THANKS FOR ALL THE RESPONSES!!!!! - Dave on Oct 12, 2008, 10:42 AM

<< Prev

3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Next >>

Clevelands Forever!351Cleveland.net

Clevelands Forever!
351Cleveland.net