Clevelands Forever!
351Cleveland.net

This forum is for the discussion of the US Ford 351 Cleveland, 351M (MODIFIED), 400 and Aussie 302C and 351C engines.

POST MESSAGE___ SEARCH___ CLASSIFIED ADS___ PHOTOS

USEFUL LINKS___ GUITAR AMPS___THE BENCH___MEMBERSHIP

The Cleveland Wiki NEW!

This forum requires membership for posting messages. Anyone can read, but you will have to be a member to post. For instructions on how to apply for membership, go here. It's easy and free!

Info on the New Tod Buttermore Cleveland Block

Visitors in this forum in the last 10 minutes: 17 Visitors
gt350hr, machoneman, tinman351, 14 guests

Not logged in | Login | Create Account

Search "Engine Build Forum" Post now!

Whoops! 'requires screw in studs' Comp Cams 270H View Thread - mike on Nov 29, 2008, 9:43 AM

whoops - tinman on Nov 29, 2008, 12:23 PM

Cam - Andy on Nov 29, 2008, 3:26 PM

I use Roller rockers, Rhodes lifters - mike on Nov 29, 2008, 5:44 PM

Valvetrain - DaveMcLain on Nov 30, 2008, 6:56 AM

Prep for Melling high volume pump, info wanted. View Thread - Vic on Nov 20, 2008, 11:56 PM

Melling - Anonymous on Nov 21, 2008, 8:16 AM

High volume - Randy on Nov 21, 2008, 8:27 AM

Re: High volume - Anonymous on Nov 21, 2008, 3:45 PM

ok so... - Randy on Nov 21, 2008, 5:56 PM

Heres an article that praises that bypassed oil - Roo on Nov 22, 2008, 6:16 PM

the G rotor is better than a gear style - joe on Nov 26, 2008, 4:29 PM

Oil pump clearances - Roo on Nov 21, 2008, 3:36 PM

Re: Oil pump clearances - DragBoss on Nov 21, 2008, 4:50 PM

Just to add... - Roo on Nov 23, 2008, 3:15 PM

Oil Pump - Anonymous on Nov 21, 2008, 5:22 PM

HV pump - Falcon67 on Nov 23, 2008, 8:08 AM

Match the pump to the engine - Mike on Nov 23, 2008, 9:21 AM

Vic - Roo on Nov 25, 2008, 10:34 AM

Just interested in what to check - HV Pump on Nov 25, 2008, 6:37 PM

Re: Prep for Melling high volume pump, info wanted. - Anonymous on Nov 25, 2008, 10:41 AM

physics 101 - Randy on Nov 25, 2008, 3:47 PM

physics - Anonymous on Nov 25, 2008, 7:11 PM

25% more volume = 25% more hp? - Roo on Nov 25, 2008, 9:05 PM

Re: 25% more volume = 25% more hp? - Miller Mylan on Nov 25, 2008, 10:10 PM

Miller... - Randy on Nov 26, 2008, 7:29 AM

Randy, I think he was slapping my face Lol - Roo on Nov 26, 2008, 7:58 AM

Kaase likes dual pickup stock rotors - joe on Nov 26, 2008, 10:44 AM

Re: Kaase likes dual pickup stock rotors - Anonymous on Nov 26, 2008, 10:50 AM

Rabotnik say speed pro don't make cast iron lid no moa - joe on Nov 26, 2008, 11:16 AM

I called Kaase's - joe on Nov 26, 2008, 11:24 AM

Re: I called Kaase's - Anonymous on Nov 26, 2008, 12:09 PM

getting a machine fit that will seal can be troublesome - joe on Nov 26, 2008, 12:20 PM

About that dual pickup - Roo on Nov 26, 2008, 12:13 PM

pix - joe on Nov 26, 2008, 12:18 PM

Re: pix - Roo on Nov 26, 2008, 2:51 PM

No slap intended - shaneus on Nov 26, 2008, 4:17 PM

Shaneus.. - Randy on Nov 26, 2008, 4:37 PM

Good thread on the 460 Forum - Roo on Nov 26, 2008, 7:39 PM

Never had as good of luck with standard volume pumps - wydendorf on Nov 26, 2008, 8:22 PM

Re: Never had as good of luck with standard volume pumps - Anonymous on Nov 27, 2008, 12:08 AM

precision oil pumps - Jim Sams on Nov 27, 2008, 5:23 AM

Pumps - kidv on Nov 27, 2008, 6:48 AM

Something different - cmf60 on Nov 27, 2008, 2:23 PM

pressure - Anonymous on Nov 27, 2008, 4:20 PM

Great Posts Guys Thanks Again n/m - Vic on Nov 28, 2008, 1:47 AM

H.V not needed!!!!!!!!!!!!! - lawrence coppola on Nov 28, 2008, 5:37 AM

Way to go - kidv on Nov 28, 2008, 6:17 AM

What is wrong - Miller Mylan on Nov 28, 2008, 11:38 AM

Re: H.V not needed!!!!!!!!!!!!! - wydendorf on Nov 28, 2008, 7:35 AM

Melling tech, from the Wayback machine - Roo on Nov 28, 2008, 8:58 AM

You will have to enter the addy in the bar n/m - Roo on Nov 28, 2008, 9:01 AM

N54 upgrades - tinman on Nov 28, 2008, 11:47 AM

wtf - Anonymous on Nov 28, 2008, 12:32 PM

Imported Ford Blocks Now? View Thread - Kelly on Nov 28, 2008, 6:20 AM

Somewhat Misleading - DaveMcLain on Nov 28, 2008, 7:27 AM

newbie with some questions..... View Thread - Larry on Nov 27, 2008, 8:09 AM

Re: newbie with some questions..... - Anonymous on Nov 27, 2008, 9:23 AM

Re: newbie with some questions..... - Kevin Black on Nov 27, 2008, 10:39 AM

Re: newbie with some questions..... - Larry on Nov 27, 2008, 2:54 PM

Re: newbie with some questions..... - Jimmie Phillips on Nov 27, 2008, 3:26 PM

Superswap Ohio Nov. 29,30 View Thread - Anonymous on Nov 22, 2008, 6:40 AM

Me - clevelandstyle on Nov 22, 2008, 7:24 AM

Jim 301-848-7127 call at show stop by talk - Anonymous on Nov 22, 2008, 7:29 AM

Hell Yea - DragBoss on Nov 22, 2008, 7:32 AM

See you there - jim1320 on Nov 22, 2008, 11:22 AM

Tim, What Day? - Phil on Nov 22, 2008, 1:27 PM

OK - Dragboss on Nov 22, 2008, 10:08 PM

Tim, The New Project is Underway - Phil on Nov 23, 2008, 8:15 AM

Nice - DragBoss on Nov 23, 2008, 10:14 AM

95 Mustang - Phil on Nov 23, 2008, 11:05 AM

Nice car - James Willett on Nov 23, 2008, 12:31 PM

ET and Weight - Phil on Nov 23, 2008, 3:06 PM

Great numbers - James Willett on Nov 23, 2008, 4:34 PM

heading to Columbus - Jeff on Nov 25, 2008, 8:08 PM

Columbus Ohio Show - James Willett on Nov 27, 2008, 1:08 PM

Tod....are you still lurking? View Thread - Bruce on Nov 26, 2008, 6:07 PM

Just got it. - Tod on Nov 27, 2008, 7:17 AM

cams again View Thread - paul on Nov 26, 2008, 8:10 AM

Cam Thoughts - Dave McLain on Nov 26, 2008, 9:10 AM

It doesn't really take as much as you would think.... - Brent on Nov 26, 2008, 10:13 AM

What heads? n/m - Brent on Nov 26, 2008, 10:06 AM

heads - paul on Nov 26, 2008, 10:30 AM

Mid Lift Flow - DaveMcLain on Nov 27, 2008, 12:40 AM

reccomended reading View Thread - joe on Nov 26, 2008, 4:49 PM

well....Mr Coonce says a mouthful.... - Bruce on Nov 26, 2008, 6:01 PM

Bruce.. - Randy on Nov 26, 2008, 6:50 PM

I'm not Mr Coonce but - joe on Nov 26, 2008, 7:16 PM

It just seems that Mr Coonce - Bruce on Nov 26, 2008, 8:45 PM

This is a "Bench" post. - Tom Custom on Nov 26, 2008, 9:21 PM

Siamese 351 block View Thread - paul on Nov 26, 2008, 5:12 PM

Couple of Nice Intakes on Ebay $$$$ View Thread - Vic on Nov 26, 2008, 8:53 AM

Re: Couple of Nice Intakes on Ebay $$$$ - SCOTT COOK on Nov 26, 2008, 1:11 PM

How can people contact you? n/m - Tom Custom on Nov 26, 2008, 2:02 PM

Engine Pull Time - 6 bell housing bolts, 4 torque converter nuts am i missing anything? View Thread - mike on Nov 24, 2008, 1:43 PM

Re: Engine Pull Time - 6 bell housing bolts, 4 torque converter nuts am i missing anything? - Anonymous on Nov 24, 2008, 2:00 PM

Re: Engine Pull Time - 6 bell housing bolts, 4 torque converter nuts am i missing anything? - Anonymous on Nov 24, 2008, 3:45 PM

yep, starter - mike on Nov 24, 2008, 4:26 PM

Way more work, putting the heads on after - Roo on Nov 24, 2008, 4:30 PM

and - tinman on Nov 24, 2008, 4:31 PM

Starter access - danford1 on Nov 24, 2008, 7:52 PM

2 more bolts - Dan on Nov 24, 2008, 8:52 PM

It's out - mike on Nov 24, 2008, 9:04 PM

When it goes back in - Falcon67 on Nov 25, 2008, 8:15 AM

Re: When it goes back in - tinman on Nov 25, 2008, 7:11 PM

thanks tinman - mike on Nov 26, 2008, 9:23 AM

Way Off Topic. Moldings needed for 61 Falcon. View Thread - danford1 on Nov 25, 2008, 7:52 PM

speedo-o-motive vs scat 408 stroker/solid roller specs View Thread - josh on Nov 10, 2008, 6:36 AM

Scat - Keith on Nov 10, 2008, 7:36 AM

hard block - josh on Nov 10, 2008, 8:18 AM

AD Performance - Mike on Nov 10, 2008, 9:17 AM

AD's phone number is.... - Randy on Nov 10, 2008, 11:31 AM

Thanxx... - Brian Adams on Nov 24, 2008, 4:06 PM

Hardblok - Keith on Nov 10, 2008, 9:35 AM

Re: hardblock - Nathan on Nov 11, 2008, 12:50 AM

Just so NO to speedomotive - Nick on Nov 10, 2008, 8:07 AM

Re: Just so NO to speedomotive - Butch on Nov 10, 2008, 11:00 AM

MAG.'S & SPEED-O - DAN on Nov 10, 2008, 12:26 PM

Pretty poor.. - James P. on Nov 10, 2008, 1:52 PM

Icing on the speed-o cake..... - Nick on Nov 10, 2008, 7:57 PM

260H and a Torker intake? - Roo on Nov 10, 2008, 4:15 PM

Re: speedo-o-motive vs scat 408 stroker/solid roller specs - Anonymous on Nov 10, 2008, 3:16 PM

Re: speedo-o-motive vs scat 408 stroker/solid roller specs - Butch on Nov 10, 2008, 3:56 PM

Ring gap friction? - Roo on Nov 10, 2008, 4:19 PM

Re: speedo-o-motive vs scat 408 stroker/solid roller specs - Anonymous on Nov 10, 2008, 4:32 PM

Give Mark call on price MME 301-932-9292 - James Willett on Nov 10, 2008, 5:11 PM

M-6250-A333 View Thread - James on Nov 19, 2008, 5:36 PM

maybe - Chris Berndt on Nov 19, 2008, 5:57 PM

M6250-A333.... - Tater on Nov 19, 2008, 6:41 PM

Re: M6250-A333.... - James on Nov 20, 2008, 7:33 PM

Cam - Andy on Nov 21, 2008, 4:43 PM

Re: Cam - James on Nov 21, 2008, 5:45 PM

Compression - Andy on Nov 21, 2008, 9:08 PM

Re: Compression - James on Nov 24, 2008, 8:17 AM

Thermal Transfer - Andy on Nov 24, 2008, 9:17 AM

Found this - allenman on Nov 24, 2008, 8:42 AM

Pictures of 4 valve heads View Thread - Vic on Nov 24, 2008, 4:20 AM

thats - Tom Custom on Nov 24, 2008, 6:15 AM

While not that fastest one here....I am proud of my new best for my 410c View Thread - Nick on Nov 23, 2008, 7:47 PM

Re: While not that fastest one here....I am proud of my new best for my 410c - DragBoss on Nov 23, 2008, 7:55 PM

There's sound! - Nick on Nov 23, 2008, 8:13 PM

Re: There's sound! - Roo on Nov 23, 2008, 9:34 PM

Let me doctor up...I mean scan in the time slip ;0 - Nick on Nov 24, 2008, 5:17 AM

Stumble off idle after adding a 3/8" open spacer View Thread - Chris W on Nov 18, 2008, 10:17 AM

Idle Feed - DaveMcLain on Nov 18, 2008, 10:53 AM

More shot - Falcon67 on Nov 18, 2008, 2:19 PM

Thanks, fellas - Chris W on Nov 19, 2008, 5:10 AM

Re: Thanks, fellas - Anonymous on Nov 22, 2008, 4:30 AM

Update - next steps? - Chris W on Nov 22, 2008, 4:31 AM

Re: Update - next steps? - Chris W on Nov 22, 2008, 4:36 AM

A few things to try - DaveMcLain on Nov 22, 2008, 6:47 AM

Excellent - Chris W on Nov 24, 2008, 4:34 AM

A3/B351/C302B Port Sizes / Locations View Thread - Will Kooiman on Nov 22, 2008, 10:45 AM

to gage ports - Dan on Nov 22, 2008, 12:19 PM

SVO vs yates - paul on Nov 22, 2008, 12:30 PM

SVO or Yates - Dan on Nov 22, 2008, 1:05 PM

here we go again...LOL - Roger Line on Nov 22, 2008, 1:23 PM

understanding the numbers - Dan on Nov 22, 2008, 4:44 PM

Re: A3/B351/C302B Port Sizes / Locations - Anonymous on Nov 22, 2008, 2:33 PM

Re: A3/B351/C302B Port Sizes / Locations - DragBoss on Nov 22, 2008, 5:06 PM

hey drag boss - paul on Nov 22, 2008, 5:32 PM

great site, great info - paul on Nov 22, 2008, 5:20 PM

don't read anything into the LOL - Roger Line on Nov 22, 2008, 6:09 PM

why just B3 - Dan on Nov 22, 2008, 6:24 PM

if we only had a crystal ball... - Roger Line on Nov 22, 2008, 6:51 PM

Hey Roger - Dragboss on Nov 22, 2008, 10:05 PM

thats fine - Roger Line on Nov 23, 2008, 10:41 AM

Re: thats fine - funcars on Nov 23, 2008, 6:48 PM

thanks - Roger Line on Nov 23, 2008, 7:09 PM

No pics - Will Kooiman on Nov 23, 2008, 10:08 PM

Dan to slow View Thread - paul on Nov 23, 2008, 1:45 PM

contact - Dan on Nov 23, 2008, 3:51 PM

How much power?? View Thread - Thomas on Nov 22, 2008, 7:01 AM

My Guess - DragBoss on Nov 22, 2008, 7:36 AM

Re: How much power?? - Tayler on Nov 22, 2008, 10:44 AM

Re: How much power?? - Thomas on Nov 22, 2008, 11:28 AM

cost - Dan on Nov 22, 2008, 1:20 PM

My guess......... - Dustin Rinne on Nov 22, 2008, 1:56 PM

Engine is in a 78 Bronco - Thomas on Nov 23, 2008, 9:54 AM

way to play! - Roger Line on Nov 23, 2008, 12:16 PM

Tires - Thomas on Nov 23, 2008, 2:04 PM

good choice - Roger Line on Nov 23, 2008, 2:28 PM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Next >>

Clevelands Forever!351Cleveland.net

Clevelands Forever!
351Cleveland.net