Clevelands Forever!
351Cleveland.net

This forum is for the discussion of the US Ford 351 Cleveland, 351M (MODIFIED), 400 and Aussie 302C and 351C engines.

POST MESSAGE___ SEARCH___ CLASSIFIED ADS___ PHOTOS

USEFUL LINKS___ GUITAR AMPS___THE BENCH___MEMBERSHIP

The Cleveland Wiki NEW!

This forum requires membership for posting messages. Anyone can read, but you will have to be a member to post. For instructions on how to apply for membership, go here. It's easy and free!

Info on the New Tod Buttermore Cleveland Block

Visitors in this forum in the last 10 minutes: 16 Visitors
gt350hr, machoneman, tinman351, 13 guests

Not logged in | Login | Create Account

Search "Engine Build Forum" Post now!

351 2 BARREL PORTING View Thread - Steve Andrews on Sep 19, 2008, 1:50 PM

No books. - Tom Custom on Sep 21, 2008, 7:10 PM

Notching block for 393 stroker kit View Thread - Anton on Sep 16, 2008, 9:22 AM

Re: Notching block for 393 stroker kit - Butch on Sep 16, 2008, 10:22 AM

Yes, it's a Cleveland n/m - Anton on Sep 16, 2008, 11:24 AM

Might want to call them back and make sure they are sending the right kit - Nick on Sep 16, 2008, 12:29 PM

I already have the kit... - Anton on Sep 16, 2008, 1:07 PM

Double post - Nick on Sep 16, 2008, 12:30 PM

Re: Notching block for 393 stroker kit - William Kiner on Sep 16, 2008, 1:14 PM

notching the block - clevochild on Sep 16, 2008, 2:44 PM

Re: Notching block for 393 stroker kit - Butch on Sep 16, 2008, 6:59 PM

I didn't need to notch - shaneus on Sep 16, 2008, 2:59 PM

Mock up - Falcon67 on Sep 16, 2008, 9:04 PM

my 408 - Keith on Sep 17, 2008, 7:20 AM

With a 4 inch stroke - DaveMcLain on Sep 17, 2008, 3:32 PM

Turned down bolts - Jim Sams on Sep 21, 2008, 10:03 AM

New Procomp Intakes View Thread - Kaz on Sep 12, 2008, 9:08 PM

Re: New Procomp Intakes - cmf60 on Sep 13, 2008, 2:36 AM

Re: New Procomp Intakes - ford429cjlover on Sep 13, 2008, 2:18 PM

Re: New Procomp Intakes - Kaz on Sep 13, 2008, 2:40 PM

Motherfucker. - Tom Custom on Sep 13, 2008, 9:04 PM

Re: Motherfucker. - Kaz on Sep 13, 2008, 9:39 PM

Your response is non sequitur. - Tom Custom on Sep 13, 2008, 9:42 PM

non sequitur??? - Kaz on Sep 13, 2008, 9:54 PM

Advertising politics - Kaz on Sep 13, 2008, 10:23 PM

We at the Cleveland Forum are always interested in false claims. - Tom Custom on Sep 13, 2008, 10:25 PM

Reading comprehension - Tom Custom on Sep 13, 2008, 10:23 PM

Re: Reading comprehension - Kaz on Sep 13, 2008, 10:49 PM

I'm just sayin, I'd be pissed. - Tom Custom on Sep 13, 2008, 11:14 PM

Re: I'm just sayin, I'd be pissed. - cmf60 on Sep 14, 2008, 12:21 AM

advertising BS - Kaz on Sep 14, 2008, 1:06 AM

surprise,surprise - russell on Sep 14, 2008, 2:44 AM

what a bunch of fuckin shit - Kaz on Sep 14, 2008, 3:10 AM

Re: what a bunch of fuckin shit - Kaz on Sep 14, 2008, 3:19 AM

Good lord, get a tasty beer and calm down...... - DAVID on Sep 14, 2008, 5:42 AM

Re: what a bunch of fuckin shit - Brad Smith on Sep 14, 2008, 4:53 PM

Tell us how you really feel! - Anonymous on Sep 14, 2008, 3:31 AM

Kaz maybe a share holder in procomp - Travis on Sep 14, 2008, 5:55 AM

Re: advertising BS - cmf60 on Sep 14, 2008, 3:30 AM

re procomp - rickwestaus on Sep 14, 2008, 6:04 AM

Buying on Ad - Dan on Sep 14, 2008, 7:28 AM

Interesting chart data there - Jim Sans on Sep 14, 2008, 6:31 AM

"unfinished castings......." - ford429cjlover on Sep 14, 2008, 10:42 AM

Re: "unfinished castings......." - shaneus on Sep 14, 2008, 11:52 AM

legal head - Dan on Sep 14, 2008, 12:02 PM

Pro comp head s in nascar - Miller Mylan on Sep 14, 2008, 10:45 PM

fear? - Dan on Sep 15, 2008, 12:29 AM

bad part of affordable castings - Dan on Sep 14, 2008, 11:56 AM

Re: Interesting chart data there - cmf60 on Sep 14, 2008, 2:56 PM

Goodbye - machstang70 on Sep 17, 2008, 8:16 PM

Procomp intakes - Kaz on Sep 19, 2008, 9:05 PM

one more pic, maybe? - Adam Culpepper on Sep 20, 2008, 5:51 AM

I'm sure Blizz will want to add these pix to the wiki. - Tom Custom on Sep 20, 2008, 7:01 AM

Re: I'm sure Blizz will want to add these pix to the wiki. - Q-CodeMach on Sep 20, 2008, 7:30 AM

Question about PComp sheet metal tunnel ram - Nathan on Sep 20, 2008, 10:48 PM

This is lookin like the Wall Street credit crisis. - Fordmech on Sep 20, 2008, 7:29 AM

2V PC intake - Kaz on Sep 20, 2008, 5:06 PM

PC fab intake - Kaz on Sep 20, 2008, 5:50 PM

junk - joe on Sep 20, 2008, 8:42 PM

Interesting pics - dion on Sep 20, 2008, 9:52 PM

Thanks Kaz - Warren on Sep 20, 2008, 9:55 PM

Am I the only person who recognizes .... - George Pence on Sep 20, 2008, 10:32 PM

New member View Thread - Jason Linke on Sep 10, 2008, 1:17 PM

welcome aboard Jason... - blizz on Sep 10, 2008, 2:29 PM

Re: welcome aboard Jason... - 87boss351 on Sep 10, 2008, 4:09 PM

Re: New member - kidv on Sep 10, 2008, 2:48 PM

Re: New member - 87boss351 on Sep 10, 2008, 3:55 PM

VA - kidv on Sep 10, 2008, 4:10 PM

Re: VA - machstang70 on Sep 10, 2008, 8:08 PM

Re: VA - 87boss351 on Sep 12, 2008, 9:10 PM

Welcome aboard! - Bruce on Sep 10, 2008, 7:53 PM

Welcome - Falcon67 on Sep 10, 2008, 8:34 PM

Welcome ! - danford1 on Sep 12, 2008, 9:48 AM

Re: Welcome ! - 87boss351 on Sep 12, 2008, 9:20 PM

before you - Travis on Sep 13, 2008, 5:23 AM

Spinning it - danford1 on Sep 13, 2008, 6:24 AM

Re: Spinning it - 87boss351 on Sep 15, 2008, 2:22 PM

bigger picture - 87boss351 on Sep 15, 2008, 2:04 PM

Nice car - kidv on Sep 15, 2008, 2:09 PM

Re: Nice car - 87boss351 on Sep 16, 2008, 12:36 PM

Restrictors - kidv on Sep 16, 2008, 3:31 PM

Re: Restrictors - 87boss351 on Sep 16, 2008, 4:09 PM

Re: bigger picture - Travis on Sep 15, 2008, 5:46 PM

Nice falcon - 87boss351 on Sep 16, 2008, 1:05 PM

Falcon - Falcon67 on Sep 19, 2008, 11:57 AM

Another falcon - kidv on Sep 19, 2008, 6:01 PM

Welcome...... - DAVID on Sep 13, 2008, 6:27 AM

Cam - kidv on Sep 13, 2008, 7:22 AM

That's interesting........ - DAVID on Sep 14, 2008, 6:55 AM

external balance - wydendorf on Sep 14, 2008, 7:36 AM

welcome.. and very nice! - dave on Sep 15, 2008, 6:20 PM

Re: welcome.. and very nice! - 87boss351 on Sep 16, 2008, 12:48 PM

nhra race - machstang70 on Sep 18, 2008, 9:18 PM

Drake Engineering Water Pump View Thread - Kevin Black on Sep 15, 2008, 10:10 AM

Re: Drake Engineering Water Pump - Kevin Black on Sep 16, 2008, 12:31 PM

Looks cool - Falcon67 on Sep 17, 2008, 8:57 AM

Re: Looks cool - Kevin Black on Sep 17, 2008, 9:52 AM

still deployed... - blizz on Sep 17, 2008, 7:26 PM

Re: still deployed... - Kevin Black on Sep 18, 2008, 9:43 AM

Power Steering Pump Engine Mount Bracket View Thread - Lucero on Sep 15, 2008, 9:39 PM

I think I have one - allenman on Sep 15, 2008, 10:15 PM

You could try this guy... - TommyK on Sep 16, 2008, 2:56 AM

Are you sure about the part number? - Jimmie Phillips on Sep 16, 2008, 9:06 AM

Re: Are you sure about the part number? - Lucero on Sep 16, 2008, 11:55 AM

Re: You could try this guy... - Lucero on Sep 16, 2008, 11:58 AM

Re: I think I have one - Lucero on Sep 16, 2008, 11:59 AM

Re: I think I have one - allenman on Sep 18, 2008, 6:56 AM

Found a source for used mustang parts - Lucero on Sep 17, 2008, 10:09 PM

Another new bloke View Thread - Nathan on Sep 16, 2008, 8:24 PM

G'day y'all - Falcon67 on Sep 16, 2008, 8:59 PM

Great to see another Aussie! - Clevochild on Sep 16, 2008, 10:23 PM

Re: - Nathan on Sep 17, 2008, 4:33 AM

Spacer / Timing - Falcon67 on Sep 17, 2008, 8:47 AM

If at first u don't succeed... View Thread - Bill Gallagher on Aug 24, 2008, 3:20 PM

MME Mark 301 932 9292 - James Willett on Aug 24, 2008, 3:52 PM

MME - Bill Gallagher on Aug 25, 2008, 5:19 PM

MME - Don on Aug 26, 2008, 3:35 PM

Re: MME - Bill Gallagher on Aug 26, 2008, 9:09 PM

He needs to - Carl on Aug 27, 2008, 8:44 AM

Re: He needs to - Mark McKeown on Sep 16, 2008, 5:18 PM

Mark! Ihave a ? - Travis on Sep 17, 2008, 5:19 AM

Dipstick for canton sump View Thread - steve on Sep 16, 2008, 7:59 AM

Re: Dipstick for canton sump - funcars on Sep 16, 2008, 8:55 AM

Thanks but really need stock dipper dims please - steve on Sep 16, 2008, 9:02 AM

Stock Dipstick - Leo Besner on Sep 16, 2008, 5:14 PM

Thanks for the info!! - steve on Sep 17, 2008, 12:52 AM

TCI Breakaway 11� Converter for FMX/351C View Thread - Ralf on Sep 13, 2008, 3:46 AM

Re: TCI Breakaway 11� Converter for FMX/351C - Richard Anderson on Sep 13, 2008, 3:28 PM

Another choice - allenman on Sep 13, 2008, 5:13 PM

Another choice - allenman on Sep 13, 2008, 5:15 PM

Okay, I will .. - Ralf on Sep 14, 2008, 9:13 AM

I have TCI Breakaway in front of my C6 - Paul Lovett on Sep 14, 2008, 11:21 AM

Re: TCI Breakaway 11� Converter for FMX/351C - Anonymous on Sep 15, 2008, 10:32 AM

I'm running a Streetfighter - Lenny on Sep 15, 2008, 4:49 PM

Thanks again, - Ralf on Sep 16, 2008, 9:46 AM

transbrake View Thread - tory on Sep 14, 2008, 10:27 AM

Re: transbrake - clevelandstyle on Sep 15, 2008, 4:07 AM

Harden shaft..... - Cory on Sep 15, 2008, 4:48 AM

Transbrake - Falcon67 on Sep 15, 2008, 7:35 AM

Re: Transbrake - kidv on Sep 15, 2008, 1:21 PM

Houston, Galveston, The Bay area... How are you? View Thread - Tom Custom on Sep 14, 2008, 7:46 AM

MSNBC - Falcon67 on Sep 15, 2008, 7:49 AM

M code after 71? View Thread - tinman on Sep 14, 2008, 9:13 PM

AFAIK that is correct. - Tom Custom on Sep 14, 2008, 10:31 PM

Need Fuel Pressure Help View Thread - George on Sep 12, 2008, 7:12 PM

Re: Need Fuel Pressure Help - DragBoss on Sep 12, 2008, 8:17 PM

Check the gauge - RobbMc on Sep 13, 2008, 10:18 AM

Fuel Pressure - Bryan Mappin on Sep 14, 2008, 5:42 AM

Valve adjustment View Thread - Matthew Caudill on Sep 7, 2008, 9:24 PM

Re: Valve adjustment - tinman on Sep 7, 2008, 10:04 PM

poly locks - Matthew Caudill on Sep 7, 2008, 10:09 PM

"Seems like the lifters are bleeding off" - Roo on Sep 7, 2008, 11:13 PM

ok - Matthew Caudill on Sep 8, 2008, 5:23 PM

Is it the drivers bank rockers that is loosening off? - Roo on Sep 7, 2008, 11:04 PM

Its the same - Matthew Caudill on Sep 7, 2008, 11:07 PM

3 sets of lifters? - danford1 on Sep 8, 2008, 8:13 AM

3 sets - Matthew Caudill on Sep 8, 2008, 5:22 PM

Valve adjustment - Andy on Sep 8, 2008, 8:53 AM

Re: Valve adjustment - Matthew Caudill on Sep 8, 2008, 5:27 PM

ohh yeah - Matthew Caudill on Sep 8, 2008, 8:41 PM

still no luck - Matthew Caudill on Sep 11, 2008, 8:21 PM

70 PSI oil pressure at idle? - Lowell on Sep 12, 2008, 6:45 AM

Are the rockers backing off? - David on Sep 12, 2008, 8:43 AM

Re: Are the rockers backing off? - tinman on Sep 13, 2008, 11:07 AM

Cougar stuck in first View Thread - Hawkxr7 on Sep 10, 2008, 9:08 PM

1 gear cat - Dan on Sep 11, 2008, 6:42 AM

More info - Hawkxr7 on Sep 11, 2008, 9:37 PM

Do the trans shift levers move? - Tom Custom on Sep 12, 2008, 8:46 AM

Re: Do the trans shift levers move? - James on Sep 12, 2008, 9:52 PM

Linkage aligned - Hawkxr7 on Sep 13, 2008, 9:34 AM

We are gonna have to learn to respect each other's threads. View Thread - Tom Custom on Sep 11, 2008, 8:07 AM

Simple debate vs bar fight................ - DAVID on Sep 11, 2008, 1:15 PM

Don't forget - Matt on Sep 11, 2008, 1:34 PM

Happens everywhere... - StickyPete on Sep 11, 2008, 3:50 PM

It's a fine line..... - Fordmech on Sep 11, 2008, 4:12 PM

when is it too much ? - joe on Sep 11, 2008, 5:53 PM

stick with the way you've been handling things. - Fordmech on Sep 11, 2008, 7:19 PM

I agree, to a point - dave on Sep 11, 2008, 6:03 PM

This forum is equivalent to Tom Crocker's private property . - joe on Sep 11, 2008, 6:11 PM

Dave - Chris Berndt on Sep 11, 2008, 6:35 PM

Re: Dave - machstang70 on Sep 11, 2008, 7:04 PM

have no problem with rules - dave on Sep 11, 2008, 9:53 PM

Internet forums are private property. - Tom Custom on Sep 12, 2008, 6:44 AM

It's too bad.... - kidv on Sep 11, 2008, 7:22 PM

The fact is that within the pure technical aspects Pro-Comp threads are just as valid... - Tom Custom on Sep 12, 2008, 6:50 AM

works for me - mike on Sep 11, 2008, 7:36 PM

or goal - mike slusher on Sep 11, 2008, 10:08 PM

rules - Dan on Sep 11, 2008, 10:28 PM

Re: rules - kidv on Sep 12, 2008, 10:28 AM

Threads on fisting are not allowed in the main forum. - Tom Custom on Sep 12, 2008, 4:03 PM

Re: Threads on fisting are not allowed in the main forum. - Kevin Black on Sep 12, 2008, 8:44 PM

Oh brother it - Dan on Sep 13, 2008, 5:16 AM

Re: Oh brother it - kidv on Sep 13, 2008, 7:25 AM

Forget you all....AFR 205s are the best head ever and you all suck - Nick on Sep 12, 2008, 7:05 AM

Re: Forget you all....AFR 205s are the best head ever and you all suck - Travis on Sep 13, 2008, 7:31 AM

I use this forum to learn new stuff... - James P. on Sep 12, 2008, 9:46 AM

Re: I use this forum to learn new stuff... - Kevin Black on Sep 12, 2008, 8:43 PM

EFI - does anyone beside Mass Air Flow make an EFI system... View Thread - TCH on Sep 9, 2008, 7:49 AM

Re: EFI - does anyone beside Mass Air Flow make an EFI system... - Kevin Black on Sep 9, 2008, 11:04 AM

my design, my build - peter on Sep 12, 2008, 6:14 AM

Re: EFI - does anyone beside Mass Air Flow make an EFI system... - funcars on Sep 9, 2008, 2:49 PM

Re: EFI - does anyone beside Mass Air Flow make an EFI system... - Justin on Sep 10, 2008, 3:40 AM

Mass-Flo Tuning - Rich Carlisle on Sep 10, 2008, 6:12 AM

Thanks all, I am in the process of checking out... - TCH on Sep 10, 2008, 5:20 PM

Re: Thanks all, I am in the process of checking out... - kskfordfleet on Sep 11, 2008, 10:22 AM

This month's Hot Rod - Robert on Sep 11, 2008, 2:29 PM

Some Pictures - George Pence on Sep 11, 2008, 3:20 PM

MAF vs. Speed Density - and a vote for EEC IV - Mike on Sep 11, 2008, 4:29 PM

Re: MAF vs. Speed Density - and a vote for EEC IV - Anonymous on Sep 11, 2008, 7:19 PM

Re: MAF vs. Speed Density - and a vote for EEC IV - funcars on Sep 11, 2008, 9:22 PM

Accel EFI - Jay M on Sep 11, 2008, 9:38 PM

Re: MAF vs. Speed Density - and a vote for EEC IV - Mike on Sep 12, 2008, 4:28 AM

Re: MAF vs. Speed Density - and a vote for EEC IV - Rich Carlisle on Sep 12, 2008, 10:44 AM

Re: MAF vs. Speed Density - and a vote for EEC IV - funcars on Sep 12, 2008, 3:46 PM

Re: MAF vs. Speed Density - and a vote for EEC IV - Jay M on Sep 12, 2008, 8:25 PM

Re: EFI - does anyone beside Mass Air Flow make an EFI system... - ford429cjlover on Sep 12, 2008, 4:36 AM

Re: EFI - does anyone beside Mass Air Flow make an EFI system... - kskfordfleet on Sep 12, 2008, 10:16 AM

Re: EFI - does anyone beside Mass Air Flow make an EFI system... - Anonymous on Sep 12, 2008, 11:13 AM

intake - MAt on Sep 12, 2008, 2:56 PM

Re: intake - funcars on Sep 12, 2008, 3:50 PM

Tuning Mass Flow EFI - Don on Sep 12, 2008, 4:21 PM

Re: Tuning Mass Flow EFI - Kevin Black on Sep 12, 2008, 8:40 PM

Another personal best for my Clevo powered Mustang. 11.757 @116.00 mph View Thread - danford1 on Sep 10, 2008, 8:15 PM

Re: Another personal best for my Clevo powered Mustang. 11.757 @116.00 mph - Anonymous on Sep 11, 2008, 6:58 AM

No, it was 369 when it was 369 - danford1 on Sep 11, 2008, 7:45 AM

Sweeeeeet - James P. on Sep 11, 2008, 7:06 AM

those are serious fast times now - Carl on Sep 11, 2008, 8:44 AM

Nice - joel on Sep 12, 2008, 1:23 AM

Nice job!! - James Willett on Sep 12, 2008, 4:55 AM

Weight - danford1 on Sep 12, 2008, 9:08 AM

Titanium Valves View Thread - machstang70 on Sep 10, 2008, 9:02 PM

Re: Titanium Valves - Chris Minchew on Sep 11, 2008, 11:50 AM

Question: Titanium Valves - machstang70 on Sep 11, 2008, 7:26 PM

Re: Question: Titanium Valves - Chris Minchew on Sep 12, 2008, 6:10 AM

<< Prev

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Next >>

Clevelands Forever!351Cleveland.net

Clevelands Forever!
351Cleveland.net