332-428 Ford FE Engine Forum (Page 32 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 48 Visitors 58custom, Garyford, Mario428, Mikestang, phil390, 43 guests

Not logged in | Login | Create Account

Post Now!

Engine Masters View Thread - Jim W on Oct 3, 2008, 12:13 PM

2,587 - Anonymous on Oct 3, 2008, 3:43 PM

What was the score for last years winner? n/m - ford-boy on Oct 3, 2008, 4:34 PM

Last year's winning score - Barry R on Oct 3, 2008, 4:45 PM

impressive turn out, and the FE's did well too, but im stunned at the - Pippin on Oct 4, 2008, 11:18 PM

OT - Close vs. Wide Ratio Toploader ID View Thread - Tim Rossol on Oct 3, 2008, 10:20 AM

No but go to - Bobby Spears on Oct 3, 2008, 11:08 AM

well... - XR7 on Oct 3, 2008, 11:15 AM

Easy to see - john vermeersch on Oct 3, 2008, 11:34 AM

while we are on this subject.... - john vermeersch on Oct 3, 2008, 11:46 AM

Tranny gears - BattlestarGalactic on Oct 3, 2008, 12:20 PM

John . . - Pete's Ponies on Oct 3, 2008, 1:25 PM

PETE, - john vermeersch on Oct 3, 2008, 2:19 PM

Come on John... - BattlestarGalactic on Oct 3, 2008, 4:50 PM

Re: Easy to see - Tim Rossol on Oct 3, 2008, 2:08 PM

Re: No but go to - Tim Rossol on Oct 3, 2008, 2:06 PM

Re: OT - Close vs. Wide Ratio Toploader ID - mike cannon on Oct 3, 2008, 11:53 AM

Close ratio has 1 3/8 "spline and wide has 1 1/16". After market gears might differ.N/M - hollis franks on Oct 3, 2008, 9:12 PM

Re: Close ratio has 1 3/8 "spline and wide has 1 1/16". After market gears might differ. - Rory McNeil on Oct 3, 2008, 9:58 PM

Wanted info on 10 1/2 to 1 390 pistons View Thread - Rick Stafford on Oct 3, 2008, 7:16 AM

Here you go : - Wayne K. on Oct 3, 2008, 6:40 PM

WerbyFord,, new Gonkulation please View Thread - dedom on Oct 3, 2008, 6:47 AM

Car details? - WerbyFord on Oct 3, 2008, 8:08 AM

LoL you caught me - dedom on Oct 3, 2008, 9:22 AM

I'll guess... - XR7 on Oct 3, 2008, 11:20 AM

10° retarded? - Brent on Oct 3, 2008, 2:12 PM

Crane Grind, R-276/420-2-10 n/m - dedom on Oct 3, 2008, 4:52 PM

Re: 10° retarded? - Anonymous on Oct 3, 2008, 5:10 PM

Re: Car details? - Rusty Gillis on Oct 3, 2008, 12:58 PM

XR7 has a good point, what is the intake/carbs? - WerbyFord on Oct 3, 2008, 11:46 AM

Re: XR7 has a good point, what is the intake/carbs? - Rusty Gillis on Oct 3, 2008, 12:44 PM

Interesting setup! 10.25 to 10.02 at 691hp - WerbyFord on Oct 4, 2008, 6:59 AM

ah crud.... - XR7 on Oct 4, 2008, 8:49 AM

I see some 9's myself.... - DaleP on Oct 4, 2008, 9:24 AM

easy 9's - Tom P on Oct 4, 2008, 10:26 AM

Hmmm not what I was hoping to hear. - dedom on Oct 4, 2008, 5:11 PM

Hardly junkable... You're not that far off and - DaleP on Oct 4, 2008, 5:35 PM

Ok, 9.82 with a max built C4 and wide ratio gears and transbrake - WerbyFord on Oct 4, 2008, 6:46 PM

Good guess WerbyFord - dedom on Oct 5, 2008, 1:02 AM

Truck Intake View Thread - Scott Harris on Oct 3, 2008, 6:02 AM

Hey Scott - Bob Hasty on Oct 3, 2008, 6:14 AM

Re: Hey Scott - Scott Harris on Oct 3, 2008, 7:49 AM

Goin' against the grain... - RJP on Oct 3, 2008, 11:42 AM

A couple of things to consider - Bob on Oct 3, 2008, 6:19 AM

Might be a good idea - Pete on Oct 3, 2008, 6:45 AM

I like my Street Dominator on my truck - Ross on Oct 3, 2008, 7:52 AM

Pickup buildup - Rory McNeil on Oct 3, 2008, 9:31 AM

I agree, headers are a must. - Pippin on Oct 3, 2008, 10:21 AM

Hey Scott, I have a T-85N and need a few parts, may I ask where you get your parts ?? - winr1 on Oct 3, 2008, 11:05 AM

Parts - Scott Harris on Oct 3, 2008, 11:42 AM

Hi Scott, I need bearings, needle and rollers, gaskets..and.. - winr1 on Oct 3, 2008, 3:45 PM

Parts - Scott Harris on Oct 5, 2008, 8:15 AM

Great catch - Ross on Oct 3, 2008, 2:22 PM

360 - MeanGene on Oct 3, 2008, 11:17 AM

Probably - Scott Harris on Oct 3, 2008, 11:45 AM

360 to 390 - Bob Hasty on Oct 3, 2008, 12:49 PM

4 barrel truck engines - Rory McNeil on Oct 3, 2008, 1:27 PM

Depends on your goals, stock iron vs Street Dominator - WerbyFord on Oct 4, 2008, 8:47 AM

Hi Scott, hearer pictures sent. - winr1 on Oct 5, 2008, 3:49 PM

Re: Hi Scott, hearer pictures sent. - jim on Oct 6, 2008, 6:08 PM

OT but way cool View Thread - ''Goose'' on Oct 3, 2008, 5:50 AM

Fantastic - Tom J. on Oct 3, 2008, 6:22 AM

Re: OT but way cool - bill sommers on Oct 3, 2008, 11:16 AM

This is great! - Mike on Oct 3, 2008, 3:49 PM

WOW. Good one! - John on Oct 3, 2008, 7:49 PM

Bobby Spears, O/T question for you,,,, View Thread - garry on Oct 3, 2008, 4:45 AM

n/m - Bill Ballinger on Oct 3, 2008, 5:05 AM

It is a CD4E if that helps, I don't know the sizes - Bill Ballinger on Oct 3, 2008, 5:06 AM

I guess I should have added ,,,,,,, - garry on Oct 3, 2008, 9:21 AM

Contour alt. - Rory McNeil on Oct 3, 2008, 9:34 AM

Re: Bobby Spears, O/T question for you,,,, - Bobby Spears on Oct 3, 2008, 11:51 AM

Re: Bobby Spears, O/T question for you,,,, - Bobby Spears on Oct 3, 2008, 4:23 PM

Thanks Bobby,,,,,, - garry on Oct 3, 2008, 6:52 PM

Rear end View Thread - gord on Oct 2, 2008, 9:27 PM

If you cant get a 1/2" socket on the 2 bottom nuts, it is a 9" - winr1 on Oct 2, 2008, 9:40 PM

May be a 9 3/8 - Tom J. on Oct 2, 2008, 9:51 PM

oops..forgot about those (9 3/8) - winr1 on Oct 2, 2008, 10:55 PM

Re: If you cant get a 1/2" socket on the 2 bottom nuts, it is a 9" - r on Oct 2, 2008, 11:39 PM

As far as I know... - Scott66gta on Oct 3, 2008, 5:32 AM

Nope, you are mistaken. A heck of a lot of 66 Tbirds had 9 3/8 rears - Hawkrod on Oct 3, 2008, 6:50 AM

identifier for 9 3/8 - Kerry on Oct 3, 2008, 6:54 AM

Yep, seen 'em both ways - MeanGene on Oct 3, 2008, 8:30 AM

If you have the tag it will tell you..........................n/m RW - Inthegarge on Oct 3, 2008, 11:36 AM

L2143A....are these old TRW pistons for a 390 ?? View Thread - winr1 on Oct 2, 2008, 9:15 PM

I don't have any data, but they are supposed to be '61-'65 390 - Bill Ballinger on Oct 3, 2008, 4:53 AM

3/8" chain slack. Too much?? View Thread - Ray Hillebrand on Oct 2, 2008, 7:29 PM

Re: 3/8" chain slack. Too much?? - donwight on Oct 2, 2008, 8:20 PM

I think you can ... - Mike Gaffney on Oct 2, 2008, 8:23 PM

After twenty thousand miles, less than 0.075. - Bob Sprowl on Oct 2, 2008, 9:09 PM

Re: After twenty thousand miles, less than 0.075. - Ray Hillebrand on Oct 2, 2008, 10:01 PM

timing chain slack - Bill on Oct 3, 2008, 2:14 AM

if motor not beat on you should be ok - chris on Oct 3, 2008, 4:35 AM

3/8 is fine - john vermeersch on Oct 3, 2008, 5:34 AM

Besides, theres a lot of difference between double roller - Beoweolf on Oct 3, 2008, 6:39 AM

Think..... - Bob on Oct 3, 2008, 6:56 AM

Re: 3/8" chain slack. Too much?? - mike cannon on Oct 3, 2008, 9:31 AM

Tunnelwedge vs. Tunnelport dual 4 intake View Thread - Jim W on Oct 2, 2008, 6:59 PM

Dual 4 BBL spacing - Roger Gordon on Oct 2, 2008, 7:19 PM

The same - WedgeFE on Oct 3, 2008, 1:50 PM

O/T question for '53-56 F-100 guys View Thread - Barry Byer on Oct 2, 2008, 6:03 PM

glovebox - Tom P on Oct 2, 2008, 7:35 PM

Barry what are you trying to do? - garry on Oct 3, 2008, 4:34 AM

They sure did! - Barry Byer on Oct 3, 2008, 9:23 AM

OK, Here's a dead horse for you guys... View Thread - bill sommers on Oct 2, 2008, 5:53 PM

Answer to #1: we dropped a Chevy PS in the block for restriction, not the head, but ...... - Rod C on Oct 2, 2008, 8:34 PM

If it were me - John on Oct 2, 2008, 9:43 PM

easy restrictor - ''Goose'' on Oct 3, 2008, 6:56 AM

Back when my friend ran D/S.... - Lance H on Oct 3, 2008, 2:25 PM

Re: OK, Here's a dead horse for you guys... - bill sommers on Oct 3, 2008, 11:41 AM

Scored '66 7 Litre, need help with wheels View Thread - Richard Dinsen on Oct 2, 2008, 5:41 PM

The wheels are not special - Hawkrod on Oct 2, 2008, 7:50 PM

Thanks, but I know that... - Richard Dinsen on Oct 3, 2008, 9:03 AM

aftermarket? - Tom P on Oct 3, 2008, 10:12 AM

I guess my point was that there are some correct ones for sale - Hawkrod on Oct 3, 2008, 5:06 PM

Re: Scored '66 7 Litre, need help with wheels - Charlie on Oct 3, 2008, 10:02 AM

Re: Scored '66 7 Litre, need help with wheels - Richard Dinsen on Oct 3, 2008, 10:21 AM

One last thing - Charlie on Oct 4, 2008, 3:17 PM

google wheel vintiques - Jason Engle on Oct 3, 2008, 11:41 AM

When did Ford Blue start? Model 1966 or Calendar 1966 or other? View Thread - WerbyFord on Oct 2, 2008, 4:39 PM

Re: When did Ford Blue start? Model 1966 or Calendar 1966 or other? - donwight on Oct 2, 2008, 4:44 PM

Re: When did Ford Blue start? Model 1966 or Calendar 1966 or other? - Wreckless Warren on Oct 2, 2008, 5:39 PM

Re: When did Ford Blue start? Model 1966 or Calendar 1966 or other? - Jeff on Oct 2, 2008, 7:42 PM

Re: When did Ford Blue start? Model 1966 or Calendar 1966 or other? - donwight on Oct 2, 2008, 8:07 PM

Re: When did Ford Blue start? Model 1966 or Calendar 1966 or other? - Jeff on Oct 2, 2008, 10:34 PM

I am sorry you are mistaken - Royce on Oct 3, 2008, 8:32 AM

Re: I am sorry you are mistaken - Jeff on Oct 4, 2008, 10:48 PM

1967 R Code Galaxie is Black - Richard on Oct 4, 2008, 2:23 AM

OK that means somebody painted over the blue - Royce on Oct 4, 2008, 6:05 AM

Re: 1967 R Code Galaxie is Black - Jeff on Oct 4, 2008, 10:50 PM

Re: 1967 R Code Galaxie is Black - Jeff on Oct 5, 2008, 9:47 AM

Ford Dark Corporate Blue began at the beginning of the '66 model year - Royce on Oct 3, 2008, 4:52 AM

390 super stock View Thread - Bryan on Oct 2, 2008, 3:27 PM

FS/A - Joe D. Craine on Oct 2, 2008, 3:30 PM

David Toren - Steve Roehrs on Oct 2, 2008, 5:57 PM

Both Dave and RJ run stock eliminater not superstock. - F570rd on Oct 3, 2008, 5:31 AM

Both Dave and RJ run stock eliminater - F570rd on Oct 3, 2008, 5:33 AM

Do you know why I am not a racist? View Thread - Bill Ballinger on Oct 2, 2008, 12:59 PM

???? - jkillam on Oct 2, 2008, 1:03 PM

Hee Hee, someone sent me an email calling me a racist - Bill Ballinger on Oct 2, 2008, 1:06 PM

I love being called a racist white boy - Hawkrod on Oct 2, 2008, 2:09 PM

Bill, people who throw the "rascist" card on the table are usually the most prejudiced. - Dave Eames on Oct 3, 2008, 7:40 AM

I am, I can only watch Ford races - Tom C on Oct 2, 2008, 1:09 PM

Cuz yer blind! - Tommy-T on Oct 2, 2008, 2:20 PM

Damn Bill, That is Very Funny! - Graham Ugalde on Oct 2, 2008, 5:07 PM

Race what? - dedom on Oct 2, 2008, 5:18 PM

Hey Bill ... - Mike Gaffney on Oct 2, 2008, 8:33 PM

I'll get right on that - Bill Ballinger on Oct 3, 2008, 4:33 AM

Bill, Is that a mug shot? - Tom C on Oct 3, 2008, 8:28 AM

It looks like one doesn't it? - Bill Ballinger on Oct 3, 2008, 3:04 PM

Racist - RWJ on Oct 5, 2008, 3:29 AM

3 New Fords in 1st 2nd 3rd in EMC View Thread - r on Oct 2, 2008, 12:40 PM

Here's a link - Royce on Oct 2, 2008, 1:00 PM

That is really good, That Boss9 is sweet - Bill Ballinger on Oct 2, 2008, 1:11 PM

wow. - Tom P on Oct 2, 2008, 1:17 PM

later updates - Tom P on Oct 2, 2008, 2:31 PM

Kaase heads - Steve Engberg on Oct 2, 2008, 2:44 PM

Tom, CHI took their 9.5 deck manifold and made the flanges thicker to work on a 400. n/m - Gary Blair on Oct 2, 2008, 3:00 PM

this is not fe why are you talking about it - dedom on Oct 2, 2008, 5:20 PM

Because there are FE's in the engine masters - Steve Engberg on Oct 3, 2008, 7:20 AM

The silence is deafening... View Thread - Tommy-T on Oct 2, 2008, 11:59 AM

What Senate Thing? - Royce on Oct 2, 2008, 12:07 PM

Much as I hate to re-open this steaming pile garden candy... - Beoweolf on Oct 2, 2008, 12:49 PM

I could believe that if the bill didn't have all the tax giveaways - Royce on Oct 2, 2008, 12:59 PM

It has been a week since we were told this bailout had to be passed by Sunday night. - David F. on Oct 2, 2008, 1:12 PM

No melt-down - Joe D. Craine on Oct 2, 2008, 1:30 PM

But the end is near...the sky is falling!...n/m - Dr. Mabuse on Oct 2, 2008, 1:50 PM

This is exactly why its usless to argue here..... - Beoweolf on Oct 2, 2008, 2:13 PM

Geez, a little stressed are you? I was just pointing out that reality... - David F. on Oct 2, 2008, 2:22 PM

Some math - Ross on Oct 2, 2008, 2:14 PM

Have I mentioned that neither me, nor most people, give a rip about the stock market? - David F. on Oct 2, 2008, 2:23 PM

1.1 Trillion $$ - Ray Hillebrand on Oct 2, 2008, 3:13 PM

Beowolf..........where's all the Obama quotes where he also takes credit for fixing this - D hearne on Oct 2, 2008, 3:23 PM

Please don't call me out for being the messenger... - Beoweolf on Oct 2, 2008, 4:06 PM

Well some people invest - Ross on Oct 2, 2008, 3:56 PM

Let's see.......The great and powerful leader (Obama) sat quietly in the corner........... - D hearne on Oct 2, 2008, 4:49 PM

You replied to the WRONG guy - Ross on Oct 2, 2008, 4:52 PM

Mine is all gone from the first round with the Clinton administration - Bill Ballinger on Oct 2, 2008, 4:52 PM

debtor society...... - ford429cjlover on Oct 2, 2008, 4:55 PM

first 4 months - Roberson on Oct 2, 2008, 6:39 PM

Yeah, umm... - Evan Gaffney on Oct 2, 2008, 6:42 PM

..I like fast cars also...I like gas mileage also...darn...desisions...desisions..... - winr1 on Oct 2, 2008, 9:08 PM

Things are going well... - Evan Gaffney on Oct 3, 2008, 8:15 AM

This shit still does not belong here - Bobby Spears on Oct 2, 2008, 8:57 PM

The answer is simple--- - Joe D. Craine on Oct 3, 2008, 5:34 AM

nothing really changes - ''Goose'' on Oct 3, 2008, 6:10 AM

Hey how 'bout those FE Ford engines...they sure are something aren't they!!!! - Dave Walters on Oct 3, 2008, 6:36 AM

Some of the best damn engines Ford built !!! - Earl Nagle on Oct 3, 2008, 8:50 AM

So are FE blocks brittle or maleable? - Anonymous on Oct 3, 2008, 11:28 AM

T'weren't me - Tom P on Oct 3, 2008, 3:40 PM

I was told by a few people that the ................. View Thread - ford-boy on Oct 2, 2008, 11:57 AM

Its probably a WAR case - Royce on Oct 2, 2008, 12:09 PM

.....As Royce said.......... - winr1 on Oct 2, 2008, 2:53 PM

The case/housing isn't the weak spot... - Dr. Mabuse on Oct 2, 2008, 5:46 PM

Here is what happens with a standard 9" rear end and it is the case. - dedom on Oct 2, 2008, 6:28 PM

Gee dedom....did it rip the bolts out or break the case ?? - winr1 on Oct 2, 2008, 9:12 PM

Usually, the case cracks.. - DaleP on Oct 2, 2008, 9:43 PM

Blew it apart - dedom on Oct 3, 2008, 1:44 AM

The 4 pinion makes the case the weak spot... - Dr. Mabuse on Oct 3, 2008, 3:43 AM

Yup.. it moves the weakest link to a new location. - DaleP on Oct 3, 2008, 8:57 PM

doesn't pay to skimp - ''Goose'' on Oct 3, 2008, 7:17 AM

Also, get a Daytona pinion retainer...n/m - Dr. Mabuse on Oct 3, 2008, 4:24 PM

Distributor Question View Thread - 67StangGT on Oct 2, 2008, 11:03 AM

Forget NAPA,etc - Tim O'Connor on Oct 2, 2008, 11:22 AM

Can you fix - 67StangGT on Oct 2, 2008, 11:30 AM

Sure!!!! Got complete inventory - Tim O'Connor on Oct 2, 2008, 12:47 PM

NAPA - Joel on Oct 2, 2008, 12:56 PM

NAPA distributors - Tim O'Connor on Oct 2, 2008, 2:32 PM

Good point - Joel on Oct 3, 2008, 12:15 PM

I have a points distributor... - Lance H on Oct 2, 2008, 3:43 PM

Sure - 67StangGT on Oct 2, 2008, 10:08 PM

One more day... - Lance H on Oct 3, 2008, 2:17 PM

Sorry No Help - Lance H on Oct 3, 2008, 7:13 PM

Year of the Cammer / Bill Coon / On the backside of the cam lobe View Thread - Roger Gordon on Oct 2, 2008, 10:13 AM

Barry PHR Article View Thread - Terry on Oct 2, 2008, 8:22 AM

could not find it - Andreas Johansen on Oct 3, 2008, 3:16 AM

Issue Date? - Terry on Oct 3, 2008, 5:21 AM

Thank You - - it is the current November issue n/n - Barry R on Oct 3, 2008, 5:43 AM

Breather - Terry on Oct 3, 2008, 8:35 AM

Its a Blue Thunder valve cover breather - Barry R on Oct 3, 2008, 1:24 PM

N/M - Terry on Oct 3, 2008, 8:35 AM

November! - Andreas Johansen on Oct 3, 2008, 11:35 AM

November - Tom P on Oct 4, 2008, 10:32 AM

intake View Thread - Todd Wimberly on Oct 2, 2008, 7:41 AM

Victor Reinz or Mr. Gasket if available.... - Brent on Oct 2, 2008, 8:23 AM

O/T craigslist View Thread - Bob C on Oct 2, 2008, 6:48 AM

I don't think so, and I'm glad actually. - Wayne K. on Oct 2, 2008, 8:24 AM

No - Timothy on Oct 2, 2008, 8:30 AM

you're right - Bob C on Oct 2, 2008, 11:15 AM

I'm slow....I just signed up today - Tim O'Connor on Oct 2, 2008, 11:25 AM

Just enter one at a time - Timothy on Oct 2, 2008, 11:30 AM

Tim, you may be better off listing your services at Ford sites, forums, etc......... - Rod C on Oct 2, 2008, 9:01 PM

anyone have a phone number for Tony Cuevas in Florida View Thread - buddy r on Oct 2, 2008, 6:21 AM

Re: anyone have a phone number for Tony Cuevas in Florida - Anonymous on Oct 2, 2008, 12:39 PM

parts needed - buddy r on Oct 2, 2008, 2:05 PM

Re: parts needed - Anonymous on Oct 2, 2008, 4:14 PM

Re: parts needed - buddy r on Oct 2, 2008, 5:07 PM

Question about sleeves View Thread - Kerry on Oct 2, 2008, 5:58 AM

Re: Question about sleeves - mike cannon on Oct 2, 2008, 8:26 AM

My machinist charges $80.00 a hole, some sleeves are thicker than others...and some.. - winr1 on Oct 2, 2008, 2:58 PM

Sleeves are great, but... - Jay Brown on Oct 2, 2008, 4:38 PM

truck on the road finely View Thread - jim smith jr on Oct 1, 2008, 11:44 PM

What year ??...and have pics ??..trucks are cool... - winr1 on Oct 2, 2008, 3:03 PM

re:truck on the road - jim smith jr on Oct 6, 2008, 1:22 PM

o/t power steering wow talk about a huge improvement... View Thread - robert on Oct 1, 2008, 10:20 PM

Who's control valve and cyl did you use? Flaming River or Stainless Steel Brakes? or - TonyS on Oct 2, 2008, 5:31 AM

i sent mine to lares corp, they rebuilt my stock ones.. - robert on Oct 2, 2008, 8:00 PM

Stick with OEM, if possible - Randy on Oct 2, 2008, 8:56 PM

randy did not know that i had heard.... - robert on Oct 2, 2008, 10:40 PM

Re: randy did not know that i had heard.... - Randy on Oct 3, 2008, 6:46 AM

randy the hose seats looked good... - robert on Oct 3, 2008, 11:46 AM

OT- Radiator Interchanging-289 to 428cj HELP!!! View Thread - derek on Oct 1, 2008, 10:09 PM

rads - Tom P on Oct 1, 2008, 11:03 PM

Derek- don't know where you live but - stan on Oct 2, 2008, 4:34 AM

Radiator opening on a smallblock car is... - Scott66gta on Oct 2, 2008, 5:57 AM

bottom outlet on the opposite side also - Kerry on Oct 2, 2008, 5:59 AM

Fast idle View Thread - gord on Oct 1, 2008, 9:41 PM

Re: Fast idle - Richard Dinsen on Oct 1, 2008, 10:14 PM

Re: Fast idle - Chuck J. on Oct 2, 2008, 12:45 AM

Re: Fast idle - gord on Oct 2, 2008, 7:03 AM

Choke wire - Chuck J. on Oct 2, 2008, 8:19 AM

Please repost this as a wanted ad in the classifieds. Thanks! n/m View Thread - jim smith jr on Oct 1, 2008, 8:30 PM

1968 fairlane fiberglass hood View Thread - mesobroke on Oct 1, 2008, 6:45 PM

Fiberglass hood - Jason on Oct 1, 2008, 9:13 PM

Have I got a deal for you!!!!! - Ken 67 Wagon on Oct 2, 2008, 4:48 AM

More SOHC Rocker Info View Thread - Jay Brown on Oct 1, 2008, 5:50 PM

That is some great information - Bill Ballinger on Oct 1, 2008, 6:03 PM

Very interesting! - Earl Nagle on Oct 1, 2008, 6:07 PM

Tough to measure that roller ID without a bore gauge or at least a telescoping gauge - William Conley on Oct 1, 2008, 7:13 PM

Got one of those telescoping gauges... - Jay Brown on Oct 1, 2008, 8:02 PM

Yeah I totally see how hard it can be... - William Conley on Oct 1, 2008, 9:24 PM

Still no luck... - Jay Brown on Oct 2, 2008, 7:12 AM

I have a silly question - Rick Lake on Oct 2, 2008, 3:00 AM

Correct... - Jay Brown on Oct 2, 2008, 7:02 AM

Re: Got one of those telescoping gauges... - Anonymous on Oct 2, 2008, 6:29 AM

I have an old set of Sears gauges... - Jay Brown on Oct 2, 2008, 7:04 AM

It would be a good thing to at least even borrow some Starrets - Bill Ballinger on Oct 2, 2008, 7:29 AM

Re: It would be a good thing to at least even borrow some Starrets - steve on Oct 2, 2008, 7:44 AM

I have Mitutoyos, a good brand, and repeatability down to 0.0001" or even 0.001" is tough. - Mike Burch on Oct 2, 2008, 8:22 AM

My dial bore gauges only go to 0.700" :( - Jay Brown on Oct 2, 2008, 9:16 AM

No sense beating it to death... - William Conley on Oct 2, 2008, 10:56 AM

Almost .006" for Needle Bearing clearance? - Wayne K. on Oct 2, 2008, 8:55 AM

The way i read NTN Corp of Japan's Spec is 1% bearing diam... - Pippin on Oct 2, 2008, 11:02 AM

Re: More SOHC Rocker Info - Bryan on Oct 2, 2008, 12:21 PM

Yes, but only up to .500" n/m - Jay Brown on Oct 2, 2008, 1:52 PM

Re: Yes, but only up to .500" n/m - Bryan on Oct 2, 2008, 3:00 PM

Great idea! - Jay Brown on Oct 2, 2008, 4:47 PM

I'm building a Genesis block 482. What would you recomend for a balancer View Thread - chrish on Oct 1, 2008, 4:57 PM

ATI Super damper - e. philpott on Oct 1, 2008, 5:13 PM

Re: ATI Super damper - Brandon on Oct 1, 2008, 5:42 PM

n/m - Anonymous on Oct 1, 2008, 5:22 PM

Romac - XR7 on Oct 1, 2008, 6:22 PM

ATI has a BBC bolt pattern - Rick Lake on Oct 2, 2008, 3:04 AM

Romac here.. fits perfect - DaleP on Oct 2, 2008, 7:02 AM

THIS IS NOT A POLITICAL POST FOR SURE View Thread - Sol Stewart on Oct 1, 2008, 4:01 PM

DUSTY RHODES I thought you left - Anonymous on Oct 1, 2008, 4:55 PM

And, just like in the new movie, Henry had to fight off a patent lawsuit,... - David F. on Oct 1, 2008, 5:05 PM

I love my Model T's - Royce on Oct 1, 2008, 5:07 PM

Damn Royce - John on Oct 1, 2008, 5:55 PM

Oct 1st - Tom P on Oct 1, 2008, 10:22 PM

Thats pretty much it - Royce on Oct 2, 2008, 7:30 AM

original upholstery! - Tom P on Oct 2, 2008, 10:20 AM

Correction: The $5.00 day was annouced on January 5th, 1914.....n/m - Rod C on Oct 1, 2008, 5:41 PM

100 Aniversary tour - john vermeersch on Oct 1, 2008, 6:46 PM

It may be re-annouced Jan.5th 2009........n/m - bbr60 on Oct 2, 2008, 10:10 AM

Now that's not funny,cruel? yes, funny? no. J/K, LOL.....n/m - Rod C on Oct 2, 2008, 9:08 PM

PCV Valve ? View Thread - Bob P. on Oct 1, 2008, 3:45 PM

do you have the wedge spacer on it - Bob Hasty on Oct 1, 2008, 3:51 PM

Re: do you have the wedge spacer on it - Bob P. on Oct 1, 2008, 4:08 PM

Re: PCV Valve ? - Chuck J. on Oct 1, 2008, 9:16 PM

Re: PCV Valve ? - Bob P. on Oct 2, 2008, 4:05 AM

Restricting oil - Chuck J. on Oct 2, 2008, 6:05 AM

Toploader 1 3/8 throwout forks View Thread - Craig on Oct 1, 2008, 3:01 PM

Re: Toploader 1 3/8 throwout forks - Andy on Oct 1, 2008, 3:43 PM

C9AE 9425 B manifold View Thread - Kerry on Oct 1, 2008, 2:51 PM

390GT - Bob Hasty on Oct 1, 2008, 3:06 PM

But Bob.. - Kerry on Oct 1, 2008, 3:25 PM

Definitely not GT - Hawkrod on Oct 1, 2008, 3:28 PM

LOL - Bob Hasty on Oct 1, 2008, 3:55 PM

Just curious - Kerry on Oct 1, 2008, 4:21 PM

scrap is down by 1/3 - Bob Hasty on Oct 1, 2008, 4:44 PM

Actually, a Galaxie would not have the C9ZE intake - Hawkrod on Oct 1, 2008, 5:03 PM

1967 comet 427 question about the tachometer View Thread - buddy r on Oct 1, 2008, 2:49 PM

Bud.............. - Earl on Oct 1, 2008, 2:54 PM

thanks Earl - buddy r on Oct 1, 2008, 3:38 PM

WRONG ! - pmw on Oct 2, 2008, 5:48 AM

Finally, I am ready to reassemble the 451 View Thread - Ray Hillebrand on Oct 1, 2008, 2:18 PM

glad to hear - fordsel on Oct 1, 2008, 3:53 PM

i hear ya on that one i just... - robert on Oct 1, 2008, 10:23 PM

Blair Patrick Racing: 406 based FE in third place at EMC today: View Thread - Bob on Oct 1, 2008, 1:44 PM

Great showing - Tom P on Oct 1, 2008, 2:01 PM

Outstanding! Love it! n/m - ford-boy on Oct 1, 2008, 2:05 PM

Some of my favorite engines are 406's - MeanGene on Oct 1, 2008, 2:17 PM

What's the deal with the Chebby guys? Can't even get an - Ray Hillebrand on Oct 1, 2008, 2:23 PM

Two out for oil pans, one for carb flange, and one with an ignition problem... n/m - Pippin on Oct 1, 2008, 2:36 PM

What I want to know is.... - Scott on Oct 1, 2008, 3:12 PM

Tube chassis or dyno headers - Mario428 on Oct 2, 2008, 2:48 AM

The standings so far... - Barry R on Oct 1, 2008, 4:40 PM

Congratulations to both of you, and Mr Brown - Bill Ballinger on Oct 1, 2008, 6:06 PM

Kudos to all - bill sommers on Oct 1, 2008, 7:37 PM

Nice going Blair and Barry! - Royce on Oct 2, 2008, 10:04 AM

Always enjoy ... - Mike Gaffney on Oct 1, 2008, 8:35 PM

Are there any 348-409 based Chevys at the EMC? n/m - ford-boy on Oct 2, 2008, 10:11 AM

No big block Chevys at all - Barry R on Oct 3, 2008, 5:58 AM

O/T but Ford. I need help on my Falcon View Thread - Richard F on Oct 1, 2008, 12:22 PM

Richard, as far as I know, the dash and firewall are the same.... - Larry Hampton on Oct 1, 2008, 12:32 PM

Correct - Anthony on Oct 1, 2008, 12:39 PM

Yes... - SuperChris on Oct 1, 2008, 1:58 PM

Thanks guys - Richard F on Oct 1, 2008, 5:26 PM

Does anyone know what year the big outlet log manifold came out? View Thread - Bill Ballinger on Oct 1, 2008, 10:55 AM

Re, exhaust manifold - John Howard on Oct 1, 2008, 2:44 PM

65 to 71 Bill - Bob Hasty on Oct 1, 2008, 3:08 PM

He found one on one of my old motors down in Sikeston - Bill Ballinger on Oct 1, 2008, 5:40 PM

A theme song for us ignorant View Thread - Bill Ballinger on Oct 1, 2008, 10:41 AM

RE: song - bill sommers on Oct 1, 2008, 1:26 PM

RE: song - bill sommers on Oct 1, 2008, 1:28 PM

Noob to this forum... View Thread - bill sommers on Oct 1, 2008, 10:20 AM

oh yes - Tom P on Oct 1, 2008, 10:28 AM

EMC , 2 FE's doing well. - Dee on Oct 1, 2008, 11:26 AM

What web browser are you using,,,. i found - Pippin on Oct 1, 2008, 12:39 PM

browser - bill sommers on Oct 1, 2008, 1:13 PM

IE a little better - bill sommers on Oct 1, 2008, 1:30 PM

re: Chrome - Robert Gile on Oct 1, 2008, 2:18 PM

I learned somthing about FE heads I did not know and doubt any of you did either! View Thread - Earl on Oct 1, 2008, 8:42 AM

Not the best choice of words - Gary B on Oct 1, 2008, 9:00 AM

Except they arent 427 heads, or 428 CJ - Ross on Oct 1, 2008, 9:05 AM

well that certainly makes a difference n/m - Gary B on Oct 1, 2008, 5:37 PM

I NEEDED a good laugh... - Tommy-T on Oct 1, 2008, 9:07 AM

Dems look like 390gt heads - bill sommers on Oct 1, 2008, 9:25 AM

That guy missed his calling... - RJP on Oct 1, 2008, 9:58 AM

That guy is a few shovel fulls short of a manure load. - Tom P on Oct 1, 2008, 10:05 AM

Nope, they are not 68 GT heads - Hawkrod on Oct 1, 2008, 10:41 AM

Not here they didn't - Tom P on Oct 1, 2008, 2:07 PM

Canadian is not domestic - Hawkrod on Oct 1, 2008, 2:58 PM

strange... look at his feedback, maybe bought these 7-20-08?!? - Larry Hampton on Oct 1, 2008, 10:37 AM

If Those Heads Are That Desireable, I am Sitting on A Gold Mine! - Graham Ugalde on Oct 1, 2008, 11:55 AM

yep, about 3 or 4 sets, maybe we can get rich, LOL! n/m - Pippin on Oct 1, 2008, 12:37 PM

Wait now, the D2 heads are even better - Ross on Oct 1, 2008, 1:02 PM

I have a set..... - Timmy390 on Oct 1, 2008, 12:21 PM

14 bolt - Anthony on Oct 1, 2008, 12:45 PM

Goldmine - Tom P on Oct 1, 2008, 2:14 PM

This guy hasn't a clue - Keith Craft on Oct 1, 2008, 9:50 PM

How to ID a manual flywheel View Thread - Ken on Oct 1, 2008, 8:02 AM

I thought they were interchangeable. No? - Wayne K. on Oct 1, 2008, 8:08 AM

They are different... - john vermeersch on Oct 1, 2008, 10:04 AM

I haven't tried it yet but I have both.... - XR7 on Oct 1, 2008, 10:24 AM

O/T sorta, 2008 October CHHR, Return to Kingdon View Thread - Damon on Oct 1, 2008, 7:25 AM

I'll be there!!! - Craig on Oct 1, 2008, 7:38 AM

Cool, Hope to see you there if I make it - Damon on Oct 1, 2008, 7:56 AM

Mrs.-T will be taking me to Bakersfield... - Tommy-T on Oct 1, 2008, 8:12 AM

I'll be at B'Field too - Tom P on Oct 1, 2008, 9:46 AM

forum shirt - Gord Bradley on Oct 1, 2008, 1:05 PM

2008 CHHR @ Famoso will be a grand affair, Ronda - Scrap Iron on Oct 1, 2008, 10:31 AM

Hey Scrap, - Damon on Oct 1, 2008, 12:58 PM

Cold one? - Tom P on Oct 1, 2008, 2:16 PM

Free beer! - Craig on Oct 1, 2008, 3:06 PM

CHRR - ROY POOL on Oct 1, 2008, 10:03 PM

The problem with the political posts is... View Thread - Dave Walters on Oct 1, 2008, 7:21 AM

another problem is... - Tommy-T on Oct 1, 2008, 8:15 AM

Your Wrong :) but where do we draw the line? - Ian on Oct 1, 2008, 8:47 AM

I am definitley NOT knocking this site, but..... - ford-boy on Oct 1, 2008, 9:51 AM

That would be best - Tom P on Oct 1, 2008, 10:11 AM

That would be great! - $Bill on Oct 1, 2008, 11:04 AM

I agree, I love this site format, but another tab for O/T could be useful. n/m - Pippin on Oct 1, 2008, 12:41 PM

<< Prev

22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!