332-428 Ford FE Engine Forum (Page 37 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 43 Visitors 62BulletBird, 64squire, Bad427stang, bbr60, BillBallinger120, FishCakes428, Garyford, machoneman, Ranchero, RoyceP, tbolt2, 32 guests

Not logged in | Login | Create Account

Post Now!

Blue Thunders ??? View Thread - Gary on Sep 21, 2008, 11:47 AM

Got them on my Mach 1 - Jay Brown on Sep 21, 2008, 12:06 PM

Anybody have a REAL live phone contact # for Ebay Trust & Safety? View Thread - Tom Custom on Sep 21, 2008, 10:27 AM

Well... - Mark on Sep 21, 2008, 11:17 AM

No, I've tried the ones I found with Yahoo, including that one. - Tom Custom on Sep 21, 2008, 11:20 AM

O.K. - well here's another one... - Mark on Sep 21, 2008, 11:30 AM

Maybe one of these will help... - Mike on Sep 21, 2008, 11:31 AM

Ebay Trust & Safety? now there's an oxymoron n/m - qikBBstang on Sep 21, 2008, 11:45 AM

New engine View Thread - 427GT on Sep 21, 2008, 10:03 AM

I have bought some parts from George........ - Craig Mitchell on Sep 21, 2008, 10:16 AM

Gessford - Alan Casida on Sep 21, 2008, 10:25 AM

I heard he was pretty busy running Hastings Motorsport Park - bbr60 on Sep 21, 2008, 10:39 AM

George is great. Highly recommended. - Chuck Brandt on Sep 21, 2008, 11:04 AM

Gessford machine - DEANs427 on Sep 21, 2008, 1:29 PM

Re: New engine - Bill Malone on Sep 21, 2008, 2:01 PM

Havent had any work done, but talked to him a bunch of times - Ross on Sep 21, 2008, 3:37 PM

Toploader question: rubber seal on output shaft does what? View Thread - Jim Whitton on Sep 21, 2008, 10:01 AM

I've never seen/heard of a seal there.... - Brent on Sep 21, 2008, 10:46 AM

me neither - rick on Sep 21, 2008, 11:00 AM

seal? - coogs on Sep 21, 2008, 1:42 PM

The rubber seal is for yokes that have a hole in the center,,,,,,,,,,, - D hearne on Sep 21, 2008, 4:21 PM

Thanks...makes sense. n/m - Jim Whitton on Sep 21, 2008, 4:41 PM

Ford sohc rockers View Thread - steve meyer on Sep 21, 2008, 8:42 AM

Sure... - Jay Brown on Sep 21, 2008, 9:41 AM

Ford Rockers - Jake R on Sep 21, 2008, 10:00 AM

Edit - the rockers are cast - Jay Brown on Sep 21, 2008, 10:14 AM

Rockers - Jake R on Sep 21, 2008, 1:31 PM

JB Weld - Keith Craft on Sep 21, 2008, 1:15 PM

Yep... - Jay Brown on Sep 21, 2008, 2:34 PM

any reason they say "427 SOHC" on them? - Tom P on Sep 21, 2008, 3:15 PM

Dunno - Barry R on Sep 22, 2008, 5:53 AM

I'd like some real time, non-destructive opinions on View Thread - Cyclone crazy on Sep 21, 2008, 8:31 AM

IMHO, it should take a foot full. - Pippin on Sep 21, 2008, 8:38 AM

I would worry more about the flex plate or u-joints giving up.n/m. - bbr60 on Sep 21, 2008, 9:33 AM

This car had a C-6........ - Earl on Sep 21, 2008, 3:57 PM

This had a C6 too.. - Tom P on Sep 21, 2008, 4:56 PM

I have had a C6 fail six times... - Dr. Mabuse on Sep 22, 2008, 9:07 AM

O/T D tv box View Thread - steve meyer on Sep 21, 2008, 7:46 AM

Anyone know about a Maddog headers in Michigan? View Thread - garry on Sep 21, 2008, 7:37 AM

Re: Anyone know about a Maddog headers in Michigan? - Beoweolf on Sep 21, 2008, 7:58 AM

Re: Anyone know about a Maddog headers in Michigan? - George Vega on Sep 22, 2008, 11:07 AM

Lokar FE Oil Dip Sticks View Thread - Wreckless Warren on Sep 21, 2008, 6:40 AM

I've had pretty good luck with them... - Jay Brown on Sep 21, 2008, 8:10 AM

Thanks Jay, Did You Use The Locking Model? - Wreckless Warren on Sep 21, 2008, 8:59 AM

Nope, standard model - Jay Brown on Sep 21, 2008, 10:19 AM

The handle is a little hard to get to with PS pump.... - Craig Mitchell on Sep 21, 2008, 10:09 AM

The motor mounts for a 1957 with 312 Y block.... View Thread - ford-boy on Sep 21, 2008, 5:45 AM

Yup, changed in 63 but - 1960 Town Vic on Sep 21, 2008, 5:53 AM

Re: Yup, changed in 63 but - Rory McNeil on Sep 21, 2008, 8:06 AM

54-58 V8 Y&FE are the same, - StarlinerRon on Sep 21, 2008, 8:32 PM

mounts - moose on Sep 21, 2008, 5:23 PM

What will my 390 redline at? and how much horsepower? View Thread - Danny on Sep 20, 2008, 9:31 PM

Torque and HP - Rick Lake on Sep 21, 2008, 4:13 AM

Re: Torque and HP - Danny on Sep 21, 2008, 4:44 PM

Lots of bottom end - Aaron J. Benham on Sep 21, 2008, 7:01 AM

Danny, I ran the same combo in a 68 Merc Monterey, but with slightly more cam - D hearne on Sep 21, 2008, 7:28 AM

Re: Danny, I ran the same combo in a 68 Merc Monterey, but with slightly more cam - Anonymous on Sep 22, 2008, 9:16 PM

Probably much better, but you'd miss driving it on the highway with the lower ratio... - D hearne on Sep 26, 2008, 6:48 PM

Whats the difference between View Thread - Anonymous on Sep 20, 2008, 8:58 PM

Slightly less performance and potential RPM..... - Beoweolf on Sep 20, 2008, 9:18 PM

Picture I took of 09 Challenger View Thread - Beoweolf on Sep 20, 2008, 8:39 PM

Stop doing that,It'll - W.KLINE on Sep 20, 2008, 9:03 PM

Re: Picture I took of 09 Challenger - Scode67FB on Sep 20, 2008, 10:58 PM

its my understanding that caliper clocking doesn't really have any impact - michael on Sep 21, 2008, 9:01 AM

I noticed the brake caliper placment too... - Beoweolf on Sep 21, 2008, 9:03 AM

picture - mike on Sep 20, 2008, 11:13 PM

I can't see them looking any different from the typical Dodge - qikBBstang on Sep 21, 2008, 1:34 AM

Neighbor across the street has had one for 6 months. Its HUGE!!! - Royce on Sep 21, 2008, 4:32 AM

is it any heavier than a new shelby mustang ?? - e. philpott on Sep 21, 2008, 6:13 AM

even if you haven't seen one in person - Beoweolf on Sep 21, 2008, 8:12 AM

Yes, they are Huge. Same platform as the 4 door...what up with that? N/M - Beoweolf on Sep 21, 2008, 6:08 AM

The head honcho who mucked up Home Depot and not a car guy - bbr60 on Sep 21, 2008, 8:08 AM

I think it looks great - Richard F on Sep 21, 2008, 7:43 AM

Re: Picture I took of 09 Challenger - Anonymous on Sep 21, 2008, 1:09 PM

I think it's a nice looking machine as well. - Wayne K. on Sep 21, 2008, 4:09 PM

i agree they are HUGE, but... - Anonymous on Sep 21, 2008, 8:48 PM

OT...Towing with bumper hitch? View Thread - Tbolt on Sep 20, 2008, 8:34 PM

I would strongly suggest - Don't Do it. - Beoweolf on Sep 20, 2008, 8:50 PM

Don't do it - Rick Lake on Sep 21, 2008, 4:26 AM

I did it off the bumper in my 96 F250 for about 8-10 yrs - Warren 390 on Sep 21, 2008, 5:11 AM

What do you mean by towing? - 1960 Town Vic on Sep 21, 2008, 5:29 AM

Bumper hitch - RWJ on Sep 21, 2008, 5:35 AM

That would be adding weight eom - 1960 Town Vic on Sep 21, 2008, 5:44 AM

I towed with one... - Mike Burch on Sep 21, 2008, 8:32 AM

You can save a fortune buying a HD hitch assembly in a Junk Yard - qikBBstang on Sep 21, 2008, 11:43 AM

Thats a great idea, - Beoweolf on Sep 21, 2008, 12:29 PM

You can buy a new one receiver for ?? - BattlestarGalactic on Sep 22, 2008, 1:07 PM

another opinion - cleandan on Sep 26, 2008, 8:09 PM

x plan View Thread - Dave on Sep 20, 2008, 7:15 PM

I wish I could help you Dave, but I'm out of X-Plans till next year.....n/m - Rod C on Sep 20, 2008, 8:01 PM

Join the DAV - 1960 Town Vic on Sep 21, 2008, 5:31 AM

DAV - Dave on Sep 21, 2008, 6:17 AM

dav - Dave on Sep 21, 2008, 11:27 AM

I just don't understand - 1960 Town Vic on Sep 21, 2008, 3:39 PM

OT- 3rd member question View Thread - AFX1964 on Sep 20, 2008, 6:47 PM

Are you positive the big-bearing case isn't nodular?...... - Rod C on Sep 20, 2008, 8:02 PM

(WAG) Probably the " a Nodular small bearing, (DO0W)...n/m - Dr. Mabuse on Sep 21, 2008, 6:38 PM

Re: (WAG) Probably the " a Nodular small bearing, (DO0W)...n/m - AFX1964 on Sep 21, 2008, 7:48 PM

I was answering your question... - Dr. Mabuse on Sep 22, 2008, 4:40 AM

Re: OT- 3rd member question - john on Sep 22, 2008, 3:41 AM

Bill Coon's Response to KenS from Sept 15th View Thread - Doug on Sep 20, 2008, 5:59 PM

Bill Coon - RWJ on Sep 20, 2008, 7:18 PM

Bill Coon and I have.... - KenS on Sep 20, 2008, 9:17 PM

Re: Bill Coon and I have.... - e. philpott on Sep 21, 2008, 6:14 AM

understanding challenged?? - Roger Gordon on Sep 21, 2008, 6:28 AM

It was Mickey Thompson's later Cammer blocks that sometimes cracked as they won the race. - Dave Shoe on Sep 21, 2008, 9:00 AM

Top Fuel Cammers / Shoe - Roger Gordon on Sep 21, 2008, 9:55 AM

The 392 TF architechture was not surpassed for a long time - Bill Ballinger on Sep 21, 2008, 10:41 AM

Early Boss 9's on nitro - Gary Blair on Sep 21, 2008, 11:26 PM

Didn't Ford do a little beefing up on the Boss429 for nitro? - Bill Ballinger on Sep 22, 2008, 6:07 AM

Here's the photo... - Jay Brown on Sep 21, 2008, 10:52 AM

Note too... - Tom P on Sep 21, 2008, 1:12 PM

I thought it was a 396 Chevy? - Royce on Sep 21, 2008, 7:55 PM

Blown 392 - Bart on Sep 21, 2008, 5:18 PM

Maybe he's concerned - MeanGene on Sep 22, 2008, 10:19 AM

Agree with Shoe - Jay Brown on Sep 21, 2008, 10:10 AM

Lots of.... - KenS on Sep 21, 2008, 10:13 PM

ONCE, just ONCE this year, I'd like to get View Thread - Cyclone crazy on Sep 20, 2008, 5:31 PM

It's always something Chuck, but if you were - DaleP on Sep 20, 2008, 5:37 PM

Don't feel bad. - ford-boy on Sep 20, 2008, 6:03 PM

Right on Dale, There are still a lot of gliches yet to be - Cyclone crazy on Sep 21, 2008, 8:07 AM

has anyone thought about this?, more ideas on Battlestar's suspension View Thread - steve bava on Sep 20, 2008, 5:22 PM

Sorry I'm late............ - BattlestarGalactic on Sep 22, 2008, 6:28 AM

junkyard fe help needed View Thread - tim pahman on Sep 20, 2008, 3:32 PM

They are worth almost that much for scrap iron price. lol - David F. on Sep 20, 2008, 3:42 PM

Door tag always lists the engine. It is the 5th digit in the serial number - hawkrod on Sep 20, 2008, 3:55 PM

yes - Bob Hasty on Sep 20, 2008, 4:00 PM

i agree buy them both - Kyle on Sep 20, 2008, 4:04 PM

i thought so - tim pahman on Sep 20, 2008, 4:10 PM

Yes, use a 15/16 socket on the front crank bolt to turn the engine over. n/m - David F. on Sep 20, 2008, 5:06 PM

you might wanna pull the plugs, will make it... - robert on Sep 21, 2008, 2:45 PM

Are all T-Birds 4V carbs?...n/m - Dr. Mabuse on Sep 20, 2008, 5:24 PM

i think so - Kyle on Sep 20, 2008, 5:37 PM

Isnt the '67 T bird air cleaner worth big bucks? - Anonymous on Sep 20, 2008, 8:52 PM

I'm pretty sure on the AirCleaners being the same base as Stang 390Non GT - qikBBstang on Sep 21, 2008, 1:41 AM

OT: Does anyone have a pic of the 66 427 Fairlane shifter bezel? View Thread - Joe on Sep 20, 2008, 1:28 PM

Bezel - Doug on Sep 20, 2008, 6:41 PM

Cruisin' Grand held it's NitroNite last nite & I took some... View Thread - Scrap Iron on Sep 20, 2008, 1:05 PM

thanks - Tom P on Sep 20, 2008, 1:15 PM

What an awesome display - ezgoing on Sep 21, 2008, 2:32 PM

Scrappy - Tom P on Sep 21, 2008, 4:59 PM

Officially a member of the Hole in the block club!!! View Thread - Gary on Sep 20, 2008, 11:38 AM

Real Bummer But Glad Your Ok - Wreckless Warren on Sep 20, 2008, 12:08 PM

bum luck - Tom P on Sep 20, 2008, 1:19 PM

Sorry to hear about the engine... - Dave Walters on Sep 20, 2008, 1:51 PM

Speaking from experience Gary, that really sucks.. - DaleP on Sep 20, 2008, 5:44 PM

Re: Speaking from experience Gary, that really sucks.. - Anonymous on Sep 21, 2008, 6:51 AM

That sucks! - Royce on Sep 20, 2008, 7:22 PM

They say misery loves company... - Brian Woodward on Sep 20, 2008, 9:35 PM

Sorry to hear... - BattlestarGalactic on Sep 22, 2008, 8:53 AM

More SOHC Rocker Info View Thread - Jay Brown on Sep 20, 2008, 11:35 AM

what is this "inverse profile" grind that is talked about in conjunction with SOHC cams? - JMO on Sep 20, 2008, 12:09 PM

Pictures - Jay Brown on Sep 20, 2008, 1:25 PM

thanks for the pictures. So where is the 'take-up' portion of the lobe? In the wasp waist? - JMO on Sep 21, 2008, 8:37 AM

Question - Ross on Sep 20, 2008, 12:12 PM

Lift taken every 2 degrees, 0,2,4,6,8... n/m - Jay Brown on Sep 20, 2008, 12:33 PM

Fantastic - Ross on Sep 20, 2008, 1:12 PM

Is this the same Schaller who - StarlinerRon on Sep 20, 2008, 5:28 PM

Jay,I have - john vermeersch on Sep 20, 2008, 12:12 PM

Do you have any Bus Schaller grinds? There was an issue - Bill Ballinger on Sep 20, 2008, 12:43 PM

CRANE 0,612 Nitro - Roger Gordon on Sep 20, 2008, 1:11 PM

You know alot about Cammers - Bill Ballinger on Sep 20, 2008, 1:28 PM

Jay it would be interesting if you brought up hardening / re-hardening the regrind - qikBBstang on Sep 21, 2008, 2:11 AM

Sounds great, thanks John! n/m - Jay Brown on Sep 20, 2008, 1:08 PM

roller skew - Don on Sep 20, 2008, 1:05 PM

Bearing picture - Ross on Sep 20, 2008, 1:28 PM

Tentatively agree with your conclusions... - Jay Brown on Sep 20, 2008, 1:35 PM

clearance - Scott66gta on Sep 20, 2008, 1:43 PM

Well... - Jay Brown on Sep 20, 2008, 1:57 PM

Those Dove rockers look like they have the right application of bearings... - Brent on Sep 20, 2008, 2:35 PM

Cam Analyzer - Jay Brown on Sep 20, 2008, 3:06 PM

I'm not the sharpest knife in the drawer... - Brent on Sep 20, 2008, 4:20 PM

I think that's right... - Jay Brown on Sep 20, 2008, 5:19 PM

It would be much easier to have a rocker arm with sufficient bearing capacity.... - Brent on Sep 20, 2008, 5:47 PM

Ramps / rate of accelleration - Sohcbob on Sep 20, 2008, 8:45 PM

Re: More SOHC Rocker Info - Doug on Sep 20, 2008, 5:32 PM

People still in the 60s - Keith Craft on Sep 21, 2008, 2:45 AM

Take up Ramp and lash - Lance H on Sep 20, 2008, 5:40 PM

One more thing.... - Lance H on Sep 20, 2008, 5:45 PM

Lash, etc. - Jay Brown on Sep 20, 2008, 6:30 PM

Thanks Jay - Lance H on Sep 20, 2008, 6:42 PM

I am very surprised to see the crane cam does not have the "take-up ramps!" - Pippin on Sep 20, 2008, 9:10 PM

SOHC Rocker's............. - Tommy A. on Sep 20, 2008, 10:06 PM

Lash and ramps... - Mike Burch on Sep 21, 2008, 8:37 AM

Air cleaner from FX Crites View Thread - Charlie 65 on Sep 20, 2008, 10:38 AM

FE Wagons View Thread - Earl E on Sep 20, 2008, 10:02 AM

I have two, - john vermeersch on Sep 20, 2008, 12:19 PM

Another long-roof - SlowFord on Sep 21, 2008, 10:04 PM

Got one! - BattlestarGalactic on Sep 22, 2008, 11:02 AM

O/T, Axle Length: View Thread - Terry on Sep 20, 2008, 9:03 AM

Re: Axle length - Dave Walters on Sep 20, 2008, 11:04 AM

Length - Terry on Sep 21, 2008, 7:23 AM

O/T Do I need a higher amp alternator? View Thread - Jim Wysocki on Sep 20, 2008, 7:03 AM

I am in need of an alternator also and ......... - ford-boy on Sep 20, 2008, 7:17 AM

Re: O/T Do I need a higher amp alternator? - Wreckless Warren on Sep 20, 2008, 7:19 AM

Get a 3g - Tom J. on Sep 20, 2008, 8:04 AM

Kieth Craft well you said: "?s on head technology feel free to ask any more questions." View Thread - qikBBstang on Sep 20, 2008, 5:14 AM

Like me and most of us, stage II is way overkill and would hurt - Pippin on Sep 20, 2008, 6:35 AM

just a WAG but I'm not so sure "killer" heads would hurt a moderate sized 427/428 engine - qikBBstang on Sep 21, 2008, 2:28 AM

Intakes and heads - Keith Craft on Sep 21, 2008, 3:21 AM

KC, question about porting - 1960 Town Vic on Sep 21, 2008, 5:51 AM

Head work - Keith Craft on Sep 21, 2008, 1:24 PM

right on Keith - Tom P on Sep 21, 2008, 1:34 PM

FE pulley ratios View Thread - Jason Engle on Sep 20, 2008, 4:57 AM

I've played with w/p pulley ratios quite a bit - rcodecj Nick on Sep 20, 2008, 6:39 AM

I think you can take this to the bank Jason Phoenix Az, heat is not like Florida Heat - qikBBstang on Sep 21, 2008, 2:43 AM

Re: FE pulley ratios - Wreckless Warren on Sep 20, 2008, 6:51 AM

Pulley info - Tim Vorick on Sep 20, 2008, 7:45 AM

What is your crank pulley diameter? N/M - rcodecj Nick on Sep 20, 2008, 8:11 AM

Crank pulley dia. - Tim Vorick on Sep 20, 2008, 9:13 AM

thanks guys - Jason Engle on Sep 21, 2008, 11:00 AM

My new pistons have .003 deck height...what DCR can I get away with... View Thread - winr1 on Sep 20, 2008, 12:50 AM

It depends - Ross on Sep 20, 2008, 4:51 AM

Thanks Ross!!...I will cc everything.. - winr1 on Sep 21, 2008, 7:18 AM

SOHC Rocker arm up-date View Thread - Keith Craft on Sep 19, 2008, 11:59 PM

rockers - Tom P on Sep 20, 2008, 12:12 AM

Rockers - Keith Craft on Sep 21, 2008, 3:24 AM

Torrington Engineering - Don on Sep 20, 2008, 5:24 AM

Bearings - Keith Craft on Sep 21, 2008, 3:29 AM

Keith: "nd we will also be doing a needle bearing design on the rocker shafts"...??? - Pippin on Sep 20, 2008, 6:33 AM

Rockers - RWJ on Sep 20, 2008, 7:06 AM

Roller bearings - Keith Craft on Sep 21, 2008, 3:34 AM

What Ross, Mike Burch, and some others have pointed out.... - Brent on Sep 20, 2008, 7:09 AM

Rockers, again - RWJ on Sep 20, 2008, 7:44 AM

Caged bearings sound.. - DaleP on Sep 20, 2008, 8:10 AM

Wayne, I didn't say bearings were the only way.... - Brent on Sep 20, 2008, 8:39 AM

Brent, - RWJ on Sep 20, 2008, 3:22 PM

Nobody is saying you HAVE to use them, or even should - Ross on Sep 20, 2008, 10:21 AM

Bushings vs needle bearings - Gary Blair on Sep 21, 2008, 11:38 PM

Bushings vs Needles -- I can see in ultra high loading conditions esp not endurance - qikBBstang on Sep 22, 2008, 8:18 AM

NASCAR rockers use a bushed fulcrum. NASCAR is endurance racing. - Gary Blair on Sep 22, 2008, 6:29 PM

The problem with Ford rockers... - Jay Brown on Sep 20, 2008, 11:08 AM

Sounds great, looking forward to the details n/m - Jay Brown on Sep 20, 2008, 11:09 AM

O/T any truth to the story that oil filled ign coils must be mounted on their side View Thread - Pippin on Sep 19, 2008, 8:20 PM

Chevy stood theirs up all the time - Ross on Sep 19, 2008, 8:28 PM

Actually for once - Tom in Vegas on Sep 19, 2008, 8:34 PM

My experience has been the opposite - fishmasterfred on Sep 19, 2008, 8:40 PM

I also had an MSD... - Tommy-T on Sep 19, 2008, 8:45 PM

Thought so, my brother had a Pertronics leak, but the center screw - Pippin on Sep 19, 2008, 8:48 PM

The first oil-filled.... - KenS on Sep 19, 2008, 10:24 PM

The oil is an electrical insulator and heat conductor. - Dave Shoe on Sep 19, 2008, 10:46 PM

actually - Tom in Vegas on Sep 19, 2008, 11:06 PM

WARNING: Coils manufactured before 1978 may contain PCBs......n/m - Rod C on Sep 20, 2008, 12:39 AM

"Pre 78s PCB's" LOL looks like your right and the EPA may have missed the boat on it - qikBBstang on Sep 20, 2008, 2:43 AM

Not selective - just plain ol' common sense. - Beoweolf on Sep 20, 2008, 4:53 AM

I dont know - Tom in Vegas on Sep 20, 2008, 8:42 AM

I used to paint wood dump truck beds with it as a kid - Bill Ballinger on Sep 20, 2008, 1:17 PM

I had a leaky coil once - ezgoing on Sep 20, 2008, 5:05 PM

best source for rear leaf springs View Thread - Tom J. on Sep 19, 2008, 8:00 PM

Your local spring shop is best... - DaleP on Sep 19, 2008, 8:43 PM

I agree with Dale - Rob on Sep 19, 2008, 8:48 PM

I agree totally... - Mark Pruitt on Sep 20, 2008, 12:15 AM

only local shop I have found and it is a maybe - Tom J. on Sep 20, 2008, 11:28 AM

Try the yellow pages, if there are trucks - StarlinerRon on Sep 20, 2008, 6:22 PM

ESPO has supplied several sets of leaf springs to me - Royce on Sep 20, 2008, 3:58 AM

Yeah, and they bumped the price - 1960 Town Vic on Sep 20, 2008, 5:35 AM

eaton's - tim pahman on Sep 20, 2008, 4:52 PM

Eaton will also tell you they are the best - 1960 Town Vic on Sep 21, 2008, 5:55 AM

O/t Ebay prices View Thread - Chrish on Sep 19, 2008, 7:53 PM

Re: O/t Ebay prices - Ray62451 on Sep 19, 2008, 8:18 PM

On top of their bigger take, they are giving less - hawkrod on Sep 19, 2008, 9:35 PM

a long time ago I learned the hard way "never trust you will get your price starting low" - qikBBstang on Sep 20, 2008, 2:49 AM

and then you have paypal - Bob Hasty on Sep 20, 2008, 6:11 AM

Re: and then you have paypal - Ray Hillebrand on Sep 20, 2008, 7:39 AM

Were taking it up the *** with ebay... - Dave Walters on Sep 20, 2008, 7:35 AM

I've been doing more on Amazon..... - Glenn on Sep 20, 2008, 10:55 AM

My expensive throwout bearing just got more expensive! View Thread - Earl on Sep 19, 2008, 7:37 PM

You've lost me Earl.. You got a roller bearing... - DaleP on Sep 19, 2008, 8:46 PM

maybe the 391 crank has a not stock diameter? Why can't you just use a plain - Pippin on Sep 19, 2008, 8:51 PM

I've had nothing but trouble with retrofit roller bearings - Royce on Sep 20, 2008, 4:24 AM

Funny how low tech is down played..... - Beoweolf on Sep 20, 2008, 5:07 AM

FYI roller brgs...... - john vermeersch on Sep 20, 2008, 5:57 AM

I know...thats why I wasted so much time looking for it. - Beoweolf on Sep 20, 2008, 9:30 PM

I'm lost too! - Earl on Sep 20, 2008, 6:13 AM

My opinion still stands, use a Pilot Bushing instead. n/m - Pippin on Sep 20, 2008, 6:38 AM

Sorry to hear it Earl... - Mark on Sep 20, 2008, 7:33 AM

Actually....... - Earl on Sep 20, 2008, 10:50 AM

O/T 67 R code Fairlane View Thread - RWJ on Sep 19, 2008, 6:13 PM

Re: O/T 67 R code Fairlane - r on Sep 19, 2008, 7:07 PM

R-code - Doug on Sep 20, 2008, 6:45 PM

Att: Barry R. A small favor to ask.... View Thread - RJP on Sep 19, 2008, 3:50 PM

Thanks Bob - mike on Sep 19, 2008, 4:24 PM

Alternator brackets View Thread - Harry H on Sep 19, 2008, 2:23 PM

Fairlanes and Thunderbirds that I know of. n/m - Gerry Proctor on Sep 19, 2008, 2:25 PM

Re: Alternator brackets - Scode67FB on Sep 19, 2008, 2:33 PM

My 68 Cougar 390 has the lower mount alt.... - Glenn on Sep 19, 2008, 2:42 PM

Just an FYI - hawkrod on Sep 19, 2008, 2:56 PM

Thanks Tom.... - Glenn on Sep 19, 2008, 4:23 PM

My 1970 F-100 360 auto has a low mount alternator, it also has ... - David F. on Sep 19, 2008, 3:37 PM

Re: Alternator brackets - Richard Dinsen on Sep 19, 2008, 3:40 PM

low mount brackets - Bob Hasty on Sep 19, 2008, 3:50 PM

Re: Alternator brackets - Wreckless Warren on Sep 19, 2008, 4:06 PM

isnt the bottom bracket different? - Harry H on Sep 19, 2008, 5:04 PM

Re: isnt the bottom bracket different? - Wreckless Warren on Sep 19, 2008, 5:35 PM

Warren that's pretty slick..... - Glenn on Sep 19, 2008, 5:49 PM

that might work - Harry H on Sep 19, 2008, 6:57 PM

I had a low mount in my Torino, 1968 - Pippin on Sep 19, 2008, 8:15 PM

68- S code smog - Cory on Sep 19, 2008, 9:48 PM

Who said that Canadians cars had smog? - hawkrod on Sep 20, 2008, 7:13 AM

low mount in my torino... - Nick on Sep 20, 2008, 3:23 AM

yep. Like your creative upper spacer. What ever works! So Nick - Pippin on Sep 20, 2008, 6:40 AM

Power Steering fluid info needed View Thread - Rob on Sep 19, 2008, 2:21 PM

Off the shelf power steering fluid works just fine. - Gerry Proctor on Sep 19, 2008, 2:27 PM

I am sorry you are wrong - Royce on Sep 20, 2008, 4:00 AM

I gotter done - Rob on Sep 20, 2008, 7:40 AM

royce question for you on this subject..... - robert on Sep 20, 2008, 10:02 AM

Robert I think they used Type "A" fluid in '62 - Royce on Sep 20, 2008, 7:55 PM

I'm pretty sure Type A was 50's,.. - Beoweolf on Sep 20, 2008, 8:56 PM

My '64 called for Type "A" in both trans and power steering pump - Royce on Sep 21, 2008, 4:29 AM

royce you are right, doh my dip stick on the.... - robert on Sep 21, 2008, 10:09 AM

Newbie intro and performance questions View Thread - 62BulletBird on Sep 19, 2008, 12:56 PM

Welcome to the forum. Two sets of twins, that deserves some kind of Award! - Anonymous on Sep 19, 2008, 1:06 PM

The Thunderbird IS my award for two sets of twins . . . - 62BulletBird on Sep 19, 2008, 1:37 PM

The 8,000 elevation is your biggest boat anchor - bbr60 on Sep 19, 2008, 1:13 PM

Welcome to another bird man.... - Mark Pruitt on Sep 19, 2008, 2:43 PM

great lookin tbird - michael on Sep 19, 2008, 2:59 PM

Which rear end? - 62BulletBird on Sep 19, 2008, 3:59 PM

rear end info - michael on Sep 19, 2008, 4:23 PM

Leave it alone... - Dr. Mabuse on Sep 19, 2008, 6:35 PM

1K? No way-(rhymes) - Mark Pruitt on Sep 19, 2008, 7:47 PM

$1K< means at least $1,000.00 (and up)..n/m - Dr. Mabuse on Sep 20, 2008, 7:56 AM

Now I gotta get off my butt - MeanGene on Sep 19, 2008, 7:30 PM

Nice ride. Start with the basics, good tune up, make sure - Pippin on Sep 19, 2008, 8:26 PM

engine pics - Timothy on Sep 20, 2008, 8:12 AM

Weight ...., Race trim 69 Mach 1 View Thread - Sohcbob on Sep 19, 2008, 12:30 PM

3600 - Tom P on Sep 19, 2008, 1:38 PM

Weight ...., Race trim 69 Mach 1 - Mike Gray on Sep 19, 2008, 2:44 PM

Re: Weight ...., Race trim 69 Mach 1 - Rusty Gillis on Sep 19, 2008, 2:48 PM

ANDDD fer almost nothing ,maybe nothing, you can - Cyclone crazy on Sep 19, 2008, 5:11 PM

Roger Arens has almost the exact same setup on his R-code..... - Larry Hampton on Sep 19, 2008, 8:27 PM

I'm thinking around 3400.. - DaleP on Sep 19, 2008, 8:53 PM

Hey Bob, There are a bunch of places... - Mike Duffy on Sep 19, 2008, 9:08 PM

Thanks guys..... - Sohcbob on Sep 19, 2008, 10:47 PM

a revised - Tom P on Sep 20, 2008, 12:06 AM

Hey.. Pick your own number, I already guessed ... - DaleP on Sep 20, 2008, 8:13 AM

3200 or less - Rusty Gillis on Sep 20, 2008, 8:25 AM

trunk weight - Mike Gray on Sep 20, 2008, 3:26 PM

Same as Mike, I was including the driver.. - DaleP on Sep 20, 2008, 5:47 PM

Fat Driver !!! 224 # with helmet N/m - Sohcbob on Sep 20, 2008, 9:34 PM

They make lighter helmets... - DaleP on Sep 20, 2008, 11:46 PM

Yeah, stick with it...cause - Sohcbob on Sep 21, 2008, 9:50 AM

third revision - Tom P on Sep 23, 2008, 12:54 AM

427 lemans rods View Thread - jeff on Sep 19, 2008, 10:46 AM

Should be - Barry Byer on Sep 19, 2008, 11:21 AM

There are actually several earlier versions. I think I have 4 or 5 different 65/66 rods - hawkrod on Sep 19, 2008, 11:39 AM

odd number... - Tom P on Sep 19, 2008, 11:55 AM

I have those and a 122060 - hawkrod on Sep 19, 2008, 2:58 PM

Where can I find FE head flow numbers View Thread - Kyle on Sep 19, 2008, 10:07 AM

nevermind found a site - Kyle on Sep 19, 2008, 10:48 AM

web site for flow numbers - Joe on Sep 19, 2008, 2:40 PM

galaxie dreaming View Thread - guess who on Sep 19, 2008, 9:46 AM

LOVE IT! - Bob Hasty on Sep 19, 2008, 10:36 AM

engine? - Tom P on Sep 19, 2008, 10:44 AM

engine - bork on Sep 19, 2008, 11:37 AM

Coming along nicely - ezgoing on Sep 19, 2008, 1:24 PM

wonder - bork on Sep 19, 2008, 2:33 PM

Do all Galaxie firewalls say "Hi" on them? - Marty Haynes on Sep 19, 2008, 3:23 PM

Well it was the 60's..... - Beoweolf on Sep 19, 2008, 6:43 PM

Evans 67" - Mike Gaffney on Sep 20, 2008, 1:55 PM

That's a Good Looking 65 - Wreckless Warren on Sep 19, 2008, 4:34 PM

Installed my new engine View Thread - George Vega on Sep 19, 2008, 9:33 AM

Wow. Hopefully you got all the kinks worked out and - Gary B on Sep 19, 2008, 1:11 PM

In light of the high tech engine stuff, let me dumb it down a little :) View Thread - Ross on Sep 19, 2008, 8:38 AM

Exhaust - Jesse Williams on Sep 19, 2008, 9:16 AM

Good point Jesse - Ross on Sep 19, 2008, 9:18 AM

I'm more into quiet too... I do like a good rumble in the exhaust... - Beoweolf on Sep 19, 2008, 7:06 PM

As for sound deadening..... - Mark Pruitt on Sep 19, 2008, 12:39 PM

Dynamat installation... - Mike Burch on Sep 19, 2008, 1:03 PM

I notice he said 20 lbs in that link... - Mark Pruitt on Sep 19, 2008, 2:54 PM

Boy, I hope I never get as old as you!!! - Tommy-T on Sep 19, 2008, 2:03 PM

I used Fatmat - Harry H on Sep 19, 2008, 2:15 PM

Don't even....I got to see the best line ever from you - Ross on Sep 19, 2008, 3:02 PM

sounds good - Donnie on Sep 19, 2008, 6:40 PM

OWWW! - Tommy-T on Sep 19, 2008, 8:48 PM

Thats funny - Ross on Sep 20, 2008, 4:44 AM

Mmmmmmmm - Mustang Mike on Sep 19, 2008, 2:20 PM

mat - Tom P on Sep 19, 2008, 6:35 PM

Nice, im for quiet when i want quiet also! - Pippin on Sep 19, 2008, 8:43 PM

I'm old and don't like loud unless it's open - DaleP on Sep 19, 2008, 8:59 PM

Exactly... - Mark Pruitt on Sep 20, 2008, 12:24 AM

You call that quiet? :) - rcodecj Nick on Sep 20, 2008, 7:07 AM

Clearance - Ross on Sep 20, 2008, 10:25 AM

Mine is a lot lower than yours. - rcodecj Nick on Sep 20, 2008, 10:58 AM

I am out the door right now but - Ross on Sep 20, 2008, 12:30 PM

Thrush - steve meyer on Sep 20, 2008, 5:08 PM

Jegs & Summit Racing both sell Thrush - rcodecj Nick on Sep 21, 2008, 7:13 AM

WILL A 1965 EX MANIFOLD FIT A 1966 TBird? View Thread - G on Sep 19, 2008, 7:15 AM

dont use - john vermeersch on Sep 19, 2008, 8:33 AM

i have some manifolds you can have - Kyle on Sep 19, 2008, 9:14 AM

Here's my contact info - G on Sep 19, 2008, 9:43 AM

Cracked manifolds, gaskets, and torque - 1960 Town Vic on Sep 20, 2008, 12:12 PM

What about the copper gaskets? - steve pearson on Sep 20, 2008, 8:37 PM

I have no experience with them. But - 1960 Town Vic on Sep 21, 2008, 5:59 AM

EMC entry View Thread - Barry R on Sep 18, 2008, 10:52 PM

Best of Luck Barry.... - Mark Pruitt on Sep 19, 2008, 12:07 AM

Good luck - Tom P on Sep 19, 2008, 12:53 AM

Good luck Barry!! - Glenn on Sep 19, 2008, 2:47 AM

All the best .... - Mike Gaffney on Sep 19, 2008, 3:32 AM

Good luck Barry.... - Brent on Sep 19, 2008, 3:38 AM

good luck Barry R from the UK - Nick on Sep 19, 2008, 8:14 AM

Give 'em hell, Barry!! n/m - ford-boy on Sep 19, 2008, 3:39 AM

EMC-FE - griffith,chuck on Sep 19, 2008, 3:55 AM

EMC 2008 - George Vega on Sep 19, 2008, 4:15 AM

Not classified at all - Barry R on Sep 19, 2008, 4:48 AM

Thanks for the info! - George Vega on Sep 19, 2008, 5:53 AM

Barry sort of chicken/egg thing: Valve Spring Pressure/ Cam break in - qikBBstang on Sep 19, 2008, 6:33 PM

Go Get Em Barry - Wreckless Warren on Sep 19, 2008, 4:49 AM

Give 'em hell - Richard Cerame on Sep 19, 2008, 5:11 AM

Can't wait to hear the result... - Dave Walters on Sep 19, 2008, 5:20 AM

Give'em hell Barry!!! Hope the FE gods are on your side this year. - Cody Ladowski on Sep 19, 2008, 5:30 AM

Can't wait to see the dyno numbers... - Jay Brown on Sep 19, 2008, 6:17 AM

FE Power! - paul metzgar on Sep 19, 2008, 8:00 AM

Wishing for good Ju-Ju during the break-in - William Conley on Sep 19, 2008, 8:07 AM

Good luck - Joel on Sep 19, 2008, 8:13 AM

Good luck man - Ross on Sep 19, 2008, 8:18 AM

Go n-�ir� an t-�dh leat! �dh m�r ort! - Bill Ballinger on Sep 19, 2008, 8:42 AM

Yeah, like Bill said... - Tom P on Sep 19, 2008, 10:42 AM

Actually its Irish Gaelic for "Good Luck" and "May the Gods Be With You" - Bill Ballinger on Sep 19, 2008, 12:10 PM

Translation... - Tommy-T on Sep 19, 2008, 2:06 PM

Take the bull by the horns - ezgoing on Sep 19, 2008, 1:26 PM

Werby Gonkulation prediction?... - Dr. Mabuse on Sep 19, 2008, 3:33 PM

go get 'em - Donnie on Sep 19, 2008, 6:08 PM

So far.... - Barry R on Sep 19, 2008, 9:09 PM

Way to go Barry. hope you are the best magician out there - Gary B on Sep 20, 2008, 1:56 PM

Black soot View Thread - gord on Sep 18, 2008, 10:25 PM

re: black soot - Donnie on Sep 18, 2008, 10:35 PM

Modern gasoline blends - Royce on Sep 20, 2008, 4:05 AM

<< Prev

27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!