332-428 Ford FE Engine Forum (Page 33 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 37 Visitors 62BulletBird, BillBallinger120, FishCakes428, gaffney1951, mike_burch, Ranchero, RoyceP, 30 guests

Not logged in | Login | Create Account

Post Now!

Need advice on repair of old M/T wheel... View Thread - Lance on Oct 1, 2008, 7:06 AM

Google: "aluminum wheel repair" for many options......n/m - Rod C on Oct 1, 2008, 7:22 AM

It will not be easy. If its cracked it needs close inspection - Bill Ballinger on Oct 1, 2008, 7:42 AM

one other question...and added info.. - Lance on Oct 1, 2008, 10:38 AM

Weldcraft in Plymouth, MI..... - Bob on Oct 1, 2008, 10:48 AM

Moderators: You have my permission to delete political posts. View Thread - Rich Ferguson on Oct 1, 2008, 6:50 AM

Well thank you. I'm honored. - Bill Ballinger on Oct 1, 2008, 6:55 AM

Also.... - SuperChris on Oct 1, 2008, 6:59 AM

Re: Also.... - Rich Ferguson on Oct 1, 2008, 7:04 AM

Too bad we don't have the forum owner's permission... - Jay Brown on Oct 1, 2008, 7:07 AM

I don't mind them, until... - DaleP on Oct 1, 2008, 7:16 AM

Not "until the name calling starts" .... it closer to "when" ! - Beoweolf on Oct 1, 2008, 8:20 AM

I have this to say about that (Seems I heard that some - Cyclone crazy on Oct 1, 2008, 7:14 AM

Oh yeah, my old grandaddy told me- - Cyclone crazy on Oct 1, 2008, 7:18 AM

Read this article if you want to know what is at stake - Bill Ballinger on Oct 1, 2008, 7:56 AM

Leave the politics in... - Tommy-T on Oct 1, 2008, 8:27 AM

Re: Leave the politics in... - XBOLT on Oct 1, 2008, 9:59 AM

Leave the politics in... - Mike Senar on Oct 1, 2008, 10:53 AM

This is worth the read - Chip on Oct 1, 2008, 3:37 PM

I didn't know that this was a political Forum View Thread - steve pearson on Oct 1, 2008, 5:25 AM

I agree Steve.... - Dave Walters on Oct 1, 2008, 5:39 AM

In about a month, some important decisions need to be made - Bill Ballinger on Oct 1, 2008, 5:48 AM

Hmmm...politics or rear ends..... - Dave Walters on Oct 1, 2008, 6:50 AM

It depends on whose rear ends :-) - Bill Ballinger on Oct 1, 2008, 6:56 AM

LOL!!! good one Bill... - Dave Walters on Oct 1, 2008, 7:03 AM

I must strongly AGREE! - Bob Hasty on Oct 1, 2008, 5:42 AM

Re: I didn't know that this was a political Forum - Jody Aberts on Oct 1, 2008, 5:43 AM

bill the problem is - Bob Hasty on Oct 1, 2008, 5:51 AM

Thats true, its a shame that spirited discourse does that - Bill Ballinger on Oct 1, 2008, 5:55 AM

"Spirited discourse" led to Burr shooting Hamilton in 1804 duel. Seems..... - Rod C on Oct 1, 2008, 7:36 AM

Same here.........leave politics off ... - Mark Artis on Oct 1, 2008, 6:26 AM

Mark, you right on the money! - Earl on Oct 1, 2008, 7:00 AM

2 cents - ''Goose'' on Oct 1, 2008, 6:05 AM

Please no politics - MeanGene on Oct 1, 2008, 6:09 AM

Please take a close look. - ford429cjlover on Oct 1, 2008, 9:00 AM

Cant wait for the spin - Tom C on Oct 1, 2008, 10:18 AM

Moultrie swap meet: Nov 21-23.... View Thread - ford429cjlover on Oct 1, 2008, 5:24 AM

360-390 View Thread - Todd Wimberly on Oct 1, 2008, 5:02 AM

How far down are the pistons in the holes? - Bill Ballinger on Oct 1, 2008, 5:06 AM

pistons - Todd Wimberly on Oct 1, 2008, 5:12 AM

Probably C7AE-B? heads, do the chambers have a D-shape - Bill Ballinger on Oct 1, 2008, 5:18 AM

falcon - Todd Wimberly on Oct 1, 2008, 7:52 AM

Some fine work, its going stand up like the wheelie cars - Bill Ballinger on Oct 1, 2008, 5:53 PM

fuel injection - Todd Wimberly on Oct 2, 2008, 3:14 AM

Cool car ... - Mike Gaffney on Oct 1, 2008, 8:59 PM

Cool! - Tom P on Oct 2, 2008, 7:45 PM

tire size - Todd Wimberly on Oct 3, 2008, 3:11 AM

8" wide - Tom P on Oct 3, 2008, 3:42 PM

Mission B.C. .... View Thread - Mike Gaffney on Sep 30, 2008, 10:42 PM

thanks Mike - Gord Bradley on Oct 1, 2008, 5:23 AM

It was great having you Mike.. - DaleP on Oct 1, 2008, 7:13 AM

GREAT picture of a great car - Cyclone crazy on Oct 1, 2008, 7:24 AM

Wondering what you thought of the Vancouver area? - Dee on Oct 1, 2008, 11:42 AM

Expected to see ... - Mike Gaffney on Oct 1, 2008, 10:27 PM

You came at the right time. - Tom P on Oct 1, 2008, 10:39 PM

Nice pictures, but "great wonders of the northwest" ??? - DaleP on Oct 2, 2008, 7:12 AM

I was wondering .... - Mike Gaffney on Oct 2, 2008, 10:18 PM

Re: Mission B.C. .... - Rory McNeil on Oct 2, 2008, 5:36 AM

Yes, one of two .... - Mike Gaffney on Oct 2, 2008, 10:25 PM

Off topic----Seriously funny View Thread - Frank Bowers on Sep 30, 2008, 7:15 PM

Enough already - 1960 Town Vic on Sep 30, 2008, 7:21 PM

I agree nm - John on Sep 30, 2008, 7:34 PM

Its tragic that there is a whole lot of truth in there - Bill Ballinger on Sep 30, 2008, 7:55 PM

find one drop - kelly on Sep 30, 2008, 9:06 PM

Actually I don't watch TV - Bill Ballinger on Oct 1, 2008, 3:54 AM

stick em up - kelly on Oct 1, 2008, 7:23 AM

Sound's like your almost talking Kennedy except the wrong state - Ken 67 Wagon on Oct 1, 2008, 7:56 AM

maybe if the Kennedy's shot first I would be - kelly on Oct 1, 2008, 10:50 AM

You know I have dug pretty deep and my conclusions differ - Bill Ballinger on Oct 2, 2008, 7:24 AM

then youve read all this - kelly on Oct 2, 2008, 9:35 AM

I've read it, but it is a little slanted. His dad was in the CIA - Bill Ballinger on Oct 2, 2008, 9:59 AM

I was speaking of Mexican oil - kelly on Oct 2, 2008, 4:51 PM

Oh the Pemex deal, that does make you wonder - Bill Ballinger on Oct 2, 2008, 6:40 PM

The forum has lost another member.... - Mark A. Spatz on Sep 30, 2008, 9:52 PM

Amen - Bobby Spears on Sep 30, 2008, 10:13 PM

agree with Mark too - Tom P on Oct 1, 2008, 12:26 AM

Amen - Nash on Oct 1, 2008, 2:38 AM

Re: agree with Mark too - steve on Oct 1, 2008, 6:23 AM

Steve, now there is a real dumb A** statement.. - DaleP on Oct 1, 2008, 5:32 PM

Re: Steve, now there is a real dumb A** statement.. - Domenic on Oct 1, 2008, 9:19 PM

I hold my Canadian friends in the highest regard - Bill Ballinger on Oct 2, 2008, 6:20 AM

Self centered Boobs?? - Roger Gordon on Sep 30, 2008, 10:20 PM

Re: The forum has lost another member.... - steve on Oct 1, 2008, 12:07 AM

Steve: You'd be... - Mark A. Spatz on Oct 1, 2008, 9:03 AM

I hear you, - Jason Engle on Oct 1, 2008, 3:36 AM

There have been as many lefties as righties tubthumping here - Bill Ballinger on Oct 1, 2008, 4:04 AM

I thought - ''Goose'' on Oct 1, 2008, 6:10 AM

Mark, sounds like you are the one going political. But I agree.... - David F. on Oct 1, 2008, 6:14 AM

"because your minds are closed and maybe brainwashed." LOL - SuperChris on Oct 1, 2008, 6:56 AM

Like he said... - Tommy-T on Oct 1, 2008, 8:42 AM

Re: The forum has lost another member.... - XBOLT on Oct 1, 2008, 10:12 AM

It's possible in this world to be a conservative/traditionalist and NOT be a Republican. - Dave Eames on Oct 1, 2008, 9:30 PM

Thanks Frank - Royce on Oct 1, 2008, 4:13 AM

You know though, If I were President Bush I would go out with middle fingers held high - Bill Ballinger on Oct 1, 2008, 5:02 AM

Re: Assholes post garbage like that - steve on Oct 1, 2008, 6:18 AM

You are a really nice guy - Frank Bowers on Oct 1, 2008, 7:32 AM

Deleted - Royce on Oct 1, 2008, 7:58 AM

It's alright Frank.... - Tommy-T on Oct 1, 2008, 2:18 PM

Boy Frank,You really know how to ........ - W.KLINE on Oct 1, 2008, 3:23 PM

Thats what made it so funny, is it was so close to true - Bill Ballinger on Oct 1, 2008, 5:49 PM

politics - John on Oct 1, 2008, 5:36 AM

Thats the truth, people believe what they believe - Bill Ballinger on Oct 1, 2008, 5:51 AM

Or ... we could keep to the middle and save the rest for face to face? - Beoweolf on Oct 1, 2008, 8:46 AM

I think you have nailed it Beowolf.... - Mark Pruitt on Oct 1, 2008, 9:41 AM

John / Politics - Roger Gordon on Oct 1, 2008, 8:01 PM

Seriously - Gary B on Oct 1, 2008, 9:31 PM

But Gary - Tom P on Oct 1, 2008, 10:50 PM

How many Jews have we killed Tom? - Garyford on Oct 2, 2008, 8:07 AM

Probably not too many - Tom P on Oct 2, 2008, 10:39 AM

So drawing a parallel between Geo W and Hitler was just a ruse? - Gary B on Oct 2, 2008, 11:43 AM

Uhh Gary - Tom P on Oct 2, 2008, 3:57 PM

wow --more fun - Steve Corbin on Oct 1, 2008, 3:27 PM

My point exactly. Native Americans used to stampede buffalo off a cliff - Bill Ballinger on Oct 1, 2008, 6:14 PM

Pros and cons of not using the surge tank?? View Thread - ford-boy on Sep 30, 2008, 7:15 PM

You need - 1960 Town Vic on Sep 30, 2008, 7:27 PM

Re: Pros and cons of not using the surge tank?? - e. philpott on Sep 30, 2008, 7:28 PM

Filler in hose - MeanGene on Sep 30, 2008, 8:24 PM

Application? - Terry on Oct 1, 2008, 5:19 AM

Re: Application? - ford-boy on Oct 1, 2008, 5:45 AM

Crossflow Radiator - Terry on Oct 1, 2008, 8:19 AM

Re: Crossflow Radiator - ford-boy on Oct 1, 2008, 8:51 AM

Mounts - Terry on Oct 1, 2008, 11:07 AM

My 66 Fairlane did not originally have one - Scott Allard on Oct 1, 2008, 11:35 AM

INtake gasket thread bumped...Local Napa store says 95158SG & 95159SG obsolete... View Thread - Bob Sprowl on Sep 30, 2008, 6:47 PM

That's what both Napa and Carquest told me also... - Rex on Sep 30, 2008, 7:19 PM

Mahle bought Victor... - Doug on Sep 30, 2008, 7:33 PM

They are still around, but like was mentioned I think they will be made by Mahle - Bill Ballinger on Oct 1, 2008, 7:10 AM

Mass Flo EFI question View Thread - Brotherdon on Sep 30, 2008, 6:30 PM

I haven't gone EFI, but am considering it. Can you - James H on Sep 30, 2008, 9:06 PM

Here is a forum - Tom in Vegas on Oct 1, 2008, 5:58 AM

Thunderbolt Air Box? View Thread - Don Hall on Sep 30, 2008, 6:25 PM

Don, check this link from the classifieds... - Val406 on Sep 30, 2008, 8:18 PM

Crites - Chuck J. on Sep 30, 2008, 10:05 PM

T bolt airboxes... - W.KLINE on Oct 1, 2008, 7:12 AM

Mark McMullen? - Tom P on Oct 1, 2008, 10:27 AM

air box - mitch on Oct 1, 2008, 10:55 AM

Thunderbolt Air Box - Don Hall on Oct 2, 2008, 6:52 AM

hurst shifter View Thread - john tolliver on Sep 30, 2008, 5:01 PM

What the is exact problem? - Bob Sprowl on Sep 30, 2008, 6:40 PM

re hurst shifter - john tolliver on Oct 1, 2008, 6:00 AM

If the handle won't move over to pick up the reverse arm... - Bob Sprowl on Oct 1, 2008, 7:03 AM

hurst shifter - john tolliver on Oct 1, 2008, 7:54 AM

IMO, replace the plastic alignment pin with a drill bit, shank end in.......... - Rod C on Oct 1, 2008, 3:55 PM

shifter-for bob sprowl - john tolliver on Oct 1, 2008, 5:21 PM

Intake manifold, question #2... View Thread - steve pearson on Sep 30, 2008, 4:13 PM

Re: Intake manifold, question #2... - Anonymous on Sep 30, 2008, 5:37 PM

ford intake - Bob Hasty on Sep 30, 2008, 7:06 PM

Cylinder head opinions, question #1... View Thread - steve pearson on Sep 30, 2008, 4:03 PM

They are very similar - Royce on Sep 30, 2008, 4:33 PM

C7AE - Bob Hasty on Sep 30, 2008, 7:11 PM

O/T but Ford, My Ford. Does anyone here get the Midwest Muscle car Magazine? View Thread - Warren 390 on Sep 30, 2008, 3:48 PM

My magazines arrived today and its in there,thanks. N/M - Warren 390 on Oct 1, 2008, 10:50 AM

O/T: Are Chinese counterfit parts all labeled Motorcraft? View Thread - bbr60 on Sep 30, 2008, 3:29 PM

I had the same problem - Tom in Vegas on Sep 30, 2008, 3:46 PM

Chinese or Mexican????? - ford429cjlover on Sep 30, 2008, 4:43 PM

Chinese or Mexican????? - ford429cjlover on Sep 30, 2008, 4:44 PM

NON-FE post: strategy for surviving the current economic crisis... View Thread - ford429cjlover on Sep 30, 2008, 3:14 PM

Re: NON-FE post: strategy for surviving the current economic crisis... - Ray Hillebrand on Sep 30, 2008, 5:12 PM

Just remember, you volunteered... - ford429cjlover on Sep 30, 2008, 5:44 PM

Where do the chicks 'n booze fit in??? - Tommy-T on Sep 30, 2008, 6:15 PM

they come after we get the first economic stimulus package.... - ford429cjlover on Sep 30, 2008, 6:24 PM

That story line .... - Mike Gaffney on Sep 30, 2008, 9:34 PM

Yep, I got a kick out of it too - Bill Ballinger on Oct 1, 2008, 5:24 AM

I'll take urban planning - Falcon67 on Oct 1, 2008, 6:45 AM

Latest Report on Randy Payne View Thread - Sol Stewart on Sep 30, 2008, 10:33 AM

I live in Gadsden, I dont think I know him, but - Mike U. on Sep 30, 2008, 1:44 PM

Mike, - Don Ragan on Sep 30, 2008, 2:20 PM

Randy at Ford South 1 - Falconred on Sep 30, 2008, 3:21 PM

best wishes.... - ford429cjlover on Sep 30, 2008, 6:27 PM

Yeah, Hope he is doing well. - Damon on Oct 1, 2008, 1:24 AM

Timing marks on crank gear View Thread - Anthony on Sep 30, 2008, 10:21 AM

Re: Timing marks on crank gear - 68xl on Oct 1, 2008, 8:45 AM

Who all is going to beech bend ford finals... View Thread - Lance on Sep 30, 2008, 7:39 AM

Barry R. could yo u please shoot me an email... View Thread - Lance on Sep 30, 2008, 7:28 AM

I'm at engine masters right now.... - Barry R on Sep 30, 2008, 4:04 PM

Are there any EMC updates? View Thread - Bill Ballinger on Sep 30, 2008, 6:31 AM

Yeah is there anyway mortals can log on and get current results - qikBBstang on Sep 30, 2008, 6:49 AM

Updates - Frank Bowers on Sep 30, 2008, 8:09 AM

Thanks, I thought that might be Mikes Buick - Bill Ballinger on Sep 30, 2008, 8:23 AM

Did Dove have some plug wires swapped? - Royce on Sep 30, 2008, 8:47 AM

Re: Did Dove have some plug wires swapped? - 68xl on Sep 30, 2008, 9:46 AM

engines - Tom P on Sep 30, 2008, 9:56 AM

Re: engines - 68xl on Sep 30, 2008, 10:32 AM

I saw Ted Eaton... - Mike Burch on Sep 30, 2008, 1:14 PM

Interestingly enough... - Jay Brown on Sep 30, 2008, 1:30 PM

The Y-block is an awesome engine, displacement/weight is the only problem - Bill Ballinger on Sep 30, 2008, 1:58 PM

Do not forget who the predecessor to the FE was. - Damon on Oct 1, 2008, 1:30 AM

Uhhh .... Over / under intake ports on the Y-block. - Beoweolf on Oct 1, 2008, 7:56 AM

Actually.... - Tommy-T on Oct 1, 2008, 9:04 AM

Re: Interestingly enough... - Don Woodruff on Sep 30, 2008, 4:40 PM

"Quite a character"... - Jay Brown on Sep 30, 2008, 4:45 PM

Re: "Quite a character"... - F570rd on Oct 1, 2008, 6:13 AM

Ted Eaton is REALLY cool... - Dr. Mabuse on Sep 30, 2008, 1:39 PM

Amen.n/m. - bbr60 on Sep 30, 2008, 2:30 PM

When are Barry and Blair on? - Tom P on Sep 30, 2008, 2:38 PM

Barry has run .. currently in third - e. philpott on Sep 30, 2008, 3:35 PM

Way cool!!!...you go Barry!!! - winr1 on Sep 30, 2008, 4:41 PM

Good job Barry. - Tom P on Sep 30, 2008, 6:23 PM

Barry, that is a great score... - stan on Sep 30, 2008, 6:54 PM

Jason w/ all else lined up the next step is touching up the Push Rod bores View Thread - qikBBstang on Sep 30, 2008, 6:08 AM

OK, thanks - Jason Engle on Sep 30, 2008, 7:12 AM

Jason I'd figured you had already matched up the ports - qikBBstang on Sep 30, 2008, 7:29 AM

Intake Comparo used unported SM - Jason Engle on Sep 30, 2008, 7:52 AM

I thought Jay matched up the ports at one point but I wondered how he did - qikBBstang on Sep 30, 2008, 11:07 AM

Porting - Jay Brown on Sep 30, 2008, 11:55 AM

thanks Jay - Jason Engle on Sep 30, 2008, 12:15 PM

It was up quite a bit over the unported version... - Jay Brown on Sep 30, 2008, 1:31 PM

Edelbrock Heads/Streetmaster pushrod interference View Thread - Jason Engle on Sep 30, 2008, 5:35 AM

What diameter pushrods and what's the cam lift? - Brent on Sep 30, 2008, 5:38 AM

lift = 0.540 pushrod dia = 11/32" - Jason Engle on Sep 30, 2008, 7:04 AM

Edelbrock Heads and RPM manifold Same Problem..... - JIm on Sep 30, 2008, 6:05 AM

Edelbrock heads are a mixture of Low Riser and Med Riser Valve Locations - qikBBstang on Sep 30, 2008, 6:18 AM

You often have to shim the rockers for best pushrod position - Royce on Sep 30, 2008, 6:34 AM

OK, that's good info - Jason Engle on Sep 30, 2008, 7:09 AM

Are there left and right rockers? - Jay Brown on Sep 30, 2008, 6:53 AM

hmmm - Jason Engle on Sep 30, 2008, 7:10 AM

Grinding on the Streetmaster - Jay Brown on Sep 30, 2008, 11:52 AM

I also have the Streetmaster/ Edelbrock head combo... - Tommy-T on Sep 30, 2008, 8:38 AM

Edelbrock Heads View Thread - Robert Gile on Sep 29, 2008, 10:58 PM

check it.. - howard on Sep 29, 2008, 11:56 PM

click on the links at the top of this page... - Dr. Mabuse on Sep 30, 2008, 4:07 AM

Re: Edelbrock Heads - Robert Gile on Sep 30, 2008, 7:03 AM

Dennis, re: Jon Thorns 63 LW.......................... View Thread - RonW on Sep 29, 2008, 8:50 PM

Re: Dennis, re: Jon Thorns 63 LW.......................... - Dennis on Sep 30, 2008, 8:41 AM

Thanks Dennis....................... - RonW on Sep 30, 2008, 9:03 AM

Jon Thorne - Mark Artis on Oct 1, 2008, 2:39 AM

Paul Adams SS/B View Thread - Jim on Sep 29, 2008, 7:36 PM

OT, need help from Falcon V8 guys on proper tie rod ends for disc brake swap.... View Thread - hollis franks on Sep 29, 2008, 7:34 PM

ends - Tom P on Sep 29, 2008, 7:44 PM

Yes, 68/9 are one size 70 is another - Hawkrod on Sep 29, 2008, 8:17 PM

Mine had a mix. - SLT on Sep 29, 2008, 8:05 PM

Timing marker for a 427? View Thread - Cliff Harmon on Sep 29, 2008, 7:18 PM

Re: Timing marker for a 427? - Todd on Sep 29, 2008, 7:34 PM

Cliff, that discussion is................ - RonW on Sep 29, 2008, 7:44 PM

427 timing pointer - Frank Bowers on Sep 29, 2008, 8:06 PM

No, you are confused - Hawkrod on Sep 29, 2008, 8:21 PM

Yep, special part - MeanGene on Sep 30, 2008, 9:08 AM

OT/Soft brake pedal View Thread - Bart on Sep 29, 2008, 6:59 PM

This may be a dumb question but... - Dave Walters on Sep 30, 2008, 7:40 AM

Bench bled. - Bart on Sep 30, 2008, 10:39 AM

Finally got some pictures posted in "photos" from the Old Drag View Thread - RonW on Sep 29, 2008, 6:47 PM

re: the Old Drag Racer's reunion...all the Southern Racers View Thread - Scrap Iron on Sep 29, 2008, 6:25 PM

Care to share - John on Sep 29, 2008, 9:36 PM

O/T AN Fitting leaks - Brake Fluid View Thread - Paul on Sep 29, 2008, 5:54 PM

try using "pipe dope" instead of tape - Kyle on Sep 29, 2008, 7:46 PM

Look elsewhere for the problem... - Dr. Mabuse on Sep 30, 2008, 4:13 AM

-AN fittings don't need anything, the mating of the two seat surfaces is the seal - Bill Ballinger on Sep 30, 2008, 6:46 AM

What he said - Falcon67 on Sep 30, 2008, 7:47 AM

actually that's right - Kyle on Sep 30, 2008, 12:37 PM

OT - Lizard Skin View Thread - Dave Coleman on Sep 29, 2008, 5:41 PM

Re: OT - Lizard Skin - John on Sep 29, 2008, 6:08 PM

lizard skin - Dave Coleman on Sep 30, 2008, 4:35 AM

Lower mainland FE guys - I need a favour - old headers View Thread - Doug on Sep 29, 2008, 5:13 PM

and you live where? - fordsel on Sep 29, 2008, 5:34 PM

I am in Vancouver - Doug on Sep 29, 2008, 5:42 PM

Vancouver BC Canada. - Gary B on Sep 29, 2008, 6:08 PM

Re: Lower mainland FE guys - I need a favour - old headers - John on Sep 29, 2008, 6:10 PM

I think i've got something - Tom P on Sep 29, 2008, 6:22 PM

Thanks Tom - Doug on Sep 29, 2008, 6:49 PM

Headers - Rory McNeil on Sep 30, 2008, 10:04 AM

Fall Carlisle Space Available View Thread - Richard on Sep 29, 2008, 4:48 PM

Need Reinz intake gaskets..in stock availability..ideas? View Thread - Jim on Sep 29, 2008, 4:11 PM

What is the difference from a Victor 15166 ??? - winr1 on Sep 29, 2008, 5:42 PM

A small sampling of intake gaskets - Howie on Sep 29, 2008, 6:30 PM

Victor Reinz numbers 95158SG and 95159SG are obsolete... - Bob Sprowl on Sep 30, 2008, 3:20 PM

I just bought a set of Victor-Reinz, complete top end for FE. - David F. on Sep 29, 2008, 7:01 PM

The set numbers help... - Jim on Sep 29, 2008, 7:12 PM

edelbrock gaskets - Jason Engle on Sep 30, 2008, 5:18 AM

Scorched earth policy?? View Thread - Barry Byer on Sep 29, 2008, 3:32 PM

OOPS!! - Barry Byer on Sep 29, 2008, 3:33 PM

so, maybe I'm not insane..... - ford429cjlover on Sep 29, 2008, 7:29 PM

That's a really clueless thing to say. - Royce on Sep 30, 2008, 8:42 AM

The mess we are in.... - RJP on Sep 30, 2008, 11:33 AM

Actually it was Clinton's tinkering with the community Reinvestment Act that caused this. - Royce on Sep 30, 2008, 12:26 PM

Not exactly - 1960 Town Vic on Sep 30, 2008, 1:25 PM

The banks didnt do it on their own - Ross on Sep 30, 2008, 2:12 PM

The banks were forced to make the bad loans - the government over regulation caused this - Royce on Oct 1, 2008, 4:26 AM

Yep, it goes back to those days - Bill Ballinger on Oct 1, 2008, 5:41 AM

these are some interesting articles..... - ford429cjlover on Sep 30, 2008, 2:08 PM

From the article you posted is the answer to your question.... - Royce on Oct 1, 2008, 11:14 AM

lookey what I found..... - ford429cjlover on Oct 2, 2008, 2:23 PM

well you know the rest of us idiots...... - ford429cjlover on Sep 30, 2008, 1:20 PM

I suppose you don't remember the crazy deficit under his administration.... - ford429cjlover on Sep 30, 2008, 2:10 PM

deficit? - Tom P on Sep 30, 2008, 2:33 PM

Cast Iron Thermostat Housing ID? View Thread - Scott Hollenbeck on Sep 29, 2008, 2:39 PM

It is an aftermarket unit. N/M - Hawkrod on Sep 29, 2008, 3:48 PM

Re: It is an aftermarket unit. N/M - Scott Hollenbeck on Sep 29, 2008, 4:04 PM

Lucy! .... You got some 'Splainin to do.... View Thread - Beoweolf on Sep 29, 2008, 1:14 PM

Re: Lucy! .... You got some 'Splainin to do.... - Robert Gile on Sep 29, 2008, 1:50 PM

It's politics as usual in D.C. - Mark Pruitt on Sep 29, 2008, 2:19 PM

Nearly half the democrats voted as their constituents wanted - Royce on Sep 29, 2008, 2:39 PM

Re: Nearly half the democrats voted as their constituents wanted - Tom C on Sep 29, 2008, 2:55 PM

Re: Nearly half the democrats voted as their constituents wanted - Royce on Sep 29, 2008, 3:05 PM

Re: Nearly half the democrats voted as their constituents wanted - Tom C on Sep 29, 2008, 3:23 PM

vote on the hill - gopher on Sep 29, 2008, 4:32 PM

Re: vote on the hill - Tom C on Sep 29, 2008, 6:17 PM

TOM.... - gopher on Sep 29, 2008, 7:02 PM

Re: TOM.... - Tom C on Sep 29, 2008, 7:41 PM

Re: Nearly half the democrats voted as their constituents wanted - Royce on Sep 30, 2008, 6:05 AM

Really - 1960 Town Vic on Sep 29, 2008, 4:10 PM

The engine hadn't even cooled down on the fleet of Mercedes limo... - Beoweolf on Sep 29, 2008, 5:54 PM

Holy Mackeral! I guess we now get to see how the theories unfold - Anonymous on Sep 29, 2008, 2:41 PM

I think they are waiting for folks to see for themselves... - Mark Pruitt on Sep 29, 2008, 2:53 PM

I say let the market find its own level. If some on Wall Street then have to jump from ... - David F. on Sep 29, 2008, 3:12 PM

In The 1929 Crash the Stock Brokers jumped out their High Rise windows. In 9/2008 - qikBBstang on Sep 29, 2008, 4:13 PM

In The 1929 Crash the Stock Brokers jumped out their High Rise windows In 2008 - qikBBstang on Sep 29, 2008, 4:34 PM

With all due respect, they did not throw me out the window. I'm.... - David F. on Sep 29, 2008, 6:52 PM

Dream on... - Tommy-T on Sep 29, 2008, 10:16 PM

http://www.nowallstreetbailout.com/ - Pippin on Sep 29, 2008, 4:53 PM

Something stinks - steve meyer on Sep 29, 2008, 6:09 PM

I thought the analysis of NBC's political reporter was interesting... - Jay Brown on Sep 29, 2008, 6:14 PM

Saving Fed $. It's who you vote for: non partisan - qikBBstang on Sep 29, 2008, 6:21 PM

It amazes me how Beowolf can sit there and lay all the blame on the republicans........... - D hearne on Sep 29, 2008, 6:42 PM

Just plain rude...... - ford429cjlover on Sep 29, 2008, 7:02 PM

Re: It amazes me how Beowolf can sit there and lay all the blame on the republicans........... - Beoweolf on Sep 29, 2008, 7:02 PM

It can be smelly too. (nm) - $Bill on Sep 30, 2008, 5:39 AM

Re: It can be smelly too. - Tom C on Sep 30, 2008, 9:25 AM

Man mine sure does, it must have been the Taco Bell or the Cashew Chicken - Bill Ballinger on Sep 30, 2008, 10:24 AM

Actually, the initial action of injecting $700 billion is needed - Bill Ballinger on Sep 29, 2008, 8:22 PM

Yep, those who think they are good - Ross on Sep 29, 2008, 8:31 PM

I think you made a wise decision. - Bill Ballinger on Sep 29, 2008, 9:22 PM

How do you get $425k? - Brent on Sep 30, 2008, 5:14 AM

And much less than that even when those debt warrants are resold - Bill Ballinger on Sep 30, 2008, 5:51 AM

actually... - Tom P on Sep 30, 2008, 10:08 AM

LOL, thats the best I've heard all day - Bill Ballinger on Sep 30, 2008, 10:22 AM

Do you own a calculator - Paul Garvin on Sep 30, 2008, 7:18 AM

this goes beyond politics.... - ford429cjlover on Sep 29, 2008, 6:47 PM

Right you are! - Tom P on Sep 29, 2008, 8:03 PM

Thanks Tom P... I "google'd" Dr. Michael Hudson and found this 3/07 interview - qikBBstang on Sep 30, 2008, 5:44 AM

Good post - Ross on Sep 29, 2008, 8:41 PM

Oh, we understand that, but there is a constitutional problem giving - Pippin on Sep 29, 2008, 8:42 PM

Read it sometime - Ross on Sep 29, 2008, 9:11 PM

Nobody from either party is saying their constituency is for this... - Mark Pruitt on Sep 29, 2008, 6:59 PM

this is great..... - ford429cjlover on Sep 29, 2008, 7:14 PM

Re: this is great..... - Tom C on Sep 29, 2008, 7:38 PM

I don't think any one thing is fully to blame, but political games - Bill Ballinger on Sep 29, 2008, 8:44 PM

didn't say Obama was the cause of it.... - Mark Pruitt on Sep 29, 2008, 8:36 PM

Let them eat cake... - Jim L on Sep 29, 2008, 7:52 PM

This mess started in the 90's - StarlinerRon on Sep 29, 2008, 8:54 PM

Re: This mess started in the 90's - Carnut427 on Sep 29, 2008, 11:55 PM

93 Democrats voted NO - that's 1/3 of them - Royce on Sep 30, 2008, 4:13 AM

Re: This mess started in the 90's - ford429cjlover on Sep 30, 2008, 5:10 AM

How do you form a Parade.... 1st you need a Grandstand - Beoweolf on Sep 30, 2008, 6:20 AM

how about the 40% of the democrats that disn't follow . - Pete's Ponies on Sep 30, 2008, 9:09 AM

I'm not the sharpest tool in the shed.... - Lance H on Sep 30, 2008, 3:08 PM

RE 'splainin' to do. My retired snowbird friend with MBA in bus/finance's scenario is - Dave Eames on Sep 30, 2008, 4:52 PM

Re: RE 'splainin' to do. My retired snowbird friend with MBA in bus/finance's scenario is - ford429cjlover on Oct 1, 2008, 5:14 AM

Too Much Borrowing - Bart on Sep 30, 2008, 7:14 PM

Engine Masters is underway View Thread - Barry R on Sep 29, 2008, 1:12 PM

Good luck Barry. Hope all goes well. Give em hell. nm - Andy (Oz) on Sep 29, 2008, 3:53 PM

Block? - Jody Aberts on Sep 29, 2008, 3:57 PM

Dove - Tom P on Sep 29, 2008, 6:30 PM

good luck..... - ford429cjlover on Sep 29, 2008, 7:22 PM

FE Man - Joe D. Craine on Sep 29, 2008, 7:59 PM

Kick some tail Barry! - John on Sep 30, 2008, 4:19 AM

ROD BEARINGS FOR 427 NASCAR RODS View Thread - TOM TUCKER on Sep 29, 2008, 11:27 AM

Nascar rods - Roberson on Sep 29, 2008, 12:15 PM

Why would you want to run those rods? - Royce on Sep 29, 2008, 2:41 PM

They call em NASCAR - john vermeersch on Sep 29, 2008, 3:05 PM

What is the bearing size for the NASCAR rods... - Bob Sprowl on Sep 29, 2008, 6:11 PM

nascar rod brgs - OB on Sep 29, 2008, 8:39 PM

Weak spot of the FE rod is... - Dave Shoe on Sep 29, 2008, 9:39 PM

Re: Weak spot of the FE rod is... - Carnut427 on Sep 30, 2008, 12:21 AM

Nacar rod bearings - RWJ on Sep 30, 2008, 1:08 PM

Dave Shoe something is a little off? - Rick Lake on Sep 30, 2008, 4:53 PM

427 NASCAR RODS - Anonymous on Oct 2, 2008, 1:43 PM

427 nascar rods - Tom Tucker on Oct 2, 2008, 2:12 PM

Re: ROD BEARINGS FOR 427 NASCAR RODS - Anonymous on Sep 30, 2008, 7:14 PM

427 rod bearings - Tom Tucker on Oct 2, 2008, 2:21 PM

61 starliner clutch question View Thread - mitch on Sep 29, 2008, 9:08 AM

I sell RAM and McLeod... - Brent on Sep 29, 2008, 10:32 AM

I run a Centerforce Dual friction.. - BattlestarGalactic on Sep 29, 2008, 10:38 AM

Centerforce... - Tony P. on Sep 29, 2008, 12:03 PM

What Brent says - Cobrabill on Sep 29, 2008, 2:17 PM

Had mine since about 1991 - BattlestarGalactic on Sep 29, 2008, 7:22 PM

What is the correct pcv valve 67 fairlane 427 View Thread - buddy r on Sep 29, 2008, 8:49 AM

not that i'm an expert or anything.... - Tom P on Sep 29, 2008, 9:34 AM

its not the one in the photo, - buddy r on Sep 29, 2008, 10:43 AM

Re: What is the correct pcv valve 67 fairlane 427 - r on Sep 29, 2008, 11:24 AM

thanks - buddy r on Sep 29, 2008, 11:29 AM

Re: thanks - r on Sep 29, 2008, 11:42 AM

that answers my question - buddy r on Sep 29, 2008, 12:33 PM

Question about the power brake fitting - Jim Wysocki on Sep 29, 2008, 5:21 PM

Re: Question about the power brake fitting - Anonymous on Sep 29, 2008, 5:57 PM

67 only - pmw on Sep 30, 2008, 4:21 AM

alternate pcv for 67 - bill sommers on Sep 30, 2008, 10:17 PM

Old Drag Racers Reunion View Thread - Jody Aberts on Sep 29, 2008, 5:07 AM

Re: Old Drag Racers Reunion - Dennis on Sep 29, 2008, 5:35 AM

Re: Old Drag Racers Reunion - Jody Aberts on Sep 29, 2008, 6:08 AM

Unfortunately, FE Bob did not make his debut with the 62......... - RonW on Sep 29, 2008, 8:10 AM

Sounds like a great event - Tom P on Sep 29, 2008, 9:39 AM

unfortunately F E Bo - bill d "THe Pride of S Ga" on Sep 29, 2008, 3:26 PM

Re "nameplay", you had to be there. - Dennis on Sep 30, 2008, 8:35 AM

Old Drag Racers Reunion - bill d "THe Pride of S Ga" on Sep 29, 2008, 3:31 PM

Help me find some Horsepower!! View Thread - Anthony on Sep 29, 2008, 4:47 AM

How much do you want?? - Andy (Oz) on Sep 29, 2008, 4:58 AM

Actually, - Anthony on Sep 29, 2008, 5:10 AM

Tell us more - Chuck J. on Sep 29, 2008, 5:39 AM

Tranny & Gears - Anthony on Sep 29, 2008, 7:18 AM

Now, Theres' yer problem ... legs too long on the Mustang - Beoweolf on Sep 29, 2008, 7:26 AM

I have C-6 and 3.25 gears............... - Timmy390 on Sep 29, 2008, 8:48 AM

Timmy390, I agree exactly. 3.25 and long black streaks - WerbyFord on Sep 29, 2008, 9:49 AM

Heads - Barry Byer on Sep 29, 2008, 5:41 AM

Good advice on the dizzy recurve. nm - Andy (Oz) on Sep 29, 2008, 3:57 PM

I'm a little confused about your cam... - Dave Walters on Sep 29, 2008, 5:46 AM

Cam Duration - Anthony on Sep 29, 2008, 7:21 AM

heads-headers and exhaust - chris on Sep 29, 2008, 6:03 AM

Exhaust - Anthony on Sep 29, 2008, 7:25 AM

Re: Exhaust - Anonymous on Sep 29, 2008, 7:25 AM

Here's another thought - Steve Roehrs on Sep 29, 2008, 7:48 AM

Heads, exhaust, etc... - Mike Burch on Sep 29, 2008, 8:21 AM

Weigh, Tune, check stall and 60ft and Cam Timing - WerbyFord on Sep 29, 2008, 9:16 AM

Hey Werby... - Anthony on Sep 29, 2008, 10:05 AM

Ditto On Higher Stall and Lower Gears First - Wreckless Warren on Sep 29, 2008, 9:36 AM

in keeping with the stock look - Bob Hasty on Sep 29, 2008, 10:09 AM

The 3 big things are - StarlinerRon on Sep 29, 2008, 9:20 PM

Progressive linkage for dual 4 bbls...does anyone know of View Thread - stan on Sep 29, 2008, 4:36 AM

Check Ebay.... - Brent on Sep 29, 2008, 5:21 AM

Dennis Carpenter, MAC's...etc. - jim carlson on Sep 29, 2008, 6:06 AM

Not sure what you are asking for Stan???? - Royce on Sep 29, 2008, 7:44 AM

Carl's... - BattlestarGalactic on Sep 29, 2008, 8:04 AM

Any pictures of tri power linkages appreciated... View Thread - Neville (Australia) on Sep 29, 2008, 1:30 AM

Gday Neville. Try this site........ - Andy (Oz) on Sep 29, 2008, 4:53 AM

HP Trends is a good site.... - Mark Pruitt on Sep 29, 2008, 6:06 AM

Pictures - Paul on Sep 29, 2008, 7:48 AM

390 or 428 truck motor? View Thread - Joe on Sep 28, 2008, 10:38 PM

No such thing... - Dr. Mabuse on Sep 29, 2008, 2:43 AM

Well there should have been one............. - $Bill on Sep 29, 2008, 5:54 AM

428 truck - Steve on Sep 29, 2008, 6:37 AM

There you go! (nm) - $Bill on Sep 29, 2008, 7:54 AM

so, maybe not a 428? - Joe on Sep 29, 2008, 8:34 AM

Someone probably used a handy casting decoder chart - Royce on Sep 29, 2008, 8:48 AM

Right. Don't believe the 428 is a 428. - Dave Shoe on Sep 29, 2008, 9:27 AM

Hey Dave, long time no see (your posts) - Gary B on Sep 29, 2008, 9:49 AM

My redirected focus is carpentry right now. - Dave Shoe on Sep 29, 2008, 2:25 PM

Well, - Gary B on Sep 29, 2008, 2:46 PM

Balloon framed houses= mice raceway in N.E. N/M - Jim Wysocki on Sep 29, 2008, 5:57 PM

Squirrel raceway. - Dave Shoe on Sep 29, 2008, 9:58 PM

Re: so, maybe not a 428? - r on Sep 29, 2008, 11:55 AM

You GOT me, Steve!...my bad... - Dr. Mabuse on Sep 29, 2008, 2:34 PM

Could it be - David on Sep 30, 2008, 3:14 PM

FT's have different heads, among other things... - Dr. Mabuse on Sep 30, 2008, 5:13 PM

O/T But bad advertising for Ford? View Thread - SuperChris on Sep 28, 2008, 9:18 PM

You should have been around when Ford was fighting the lawsuit. - Hawkrod on Sep 29, 2008, 7:22 AM

Just one in a long list of " suspicious" Car company deeds. - Beoweolf on Sep 29, 2008, 7:46 AM

Intermittent wipers? - Tom P on Sep 29, 2008, 9:42 AM

There is a difference between multi-speed wipers and intermittent - Beoweolf on Sep 29, 2008, 10:31 AM

Intermittent wipers and sun roofs.... - Mark Pruitt on Sep 29, 2008, 10:39 AM

No, he is correct intermittent wipers did come on the 66's - Hawkrod on Sep 29, 2008, 11:14 AM

<< Prev

23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!