332-428 Ford FE Engine Forum (Page 34 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 38 Visitors 62BulletBird, BillBallinger120, FishCakes428, gaffney1951, mike_burch, Ranchero, RoyceP, 31 guests

Not logged in | Login | Create Account

Post Now!

O/T Is there a forum dedicated to TBolts/TBolt clones? View Thread - Dave Eames on Sep 28, 2008, 8:28 PM

Craig Sutton's Site. - onesmrtguy on Sep 28, 2008, 9:34 PM

Also Woody's Fairlane Site. - onesmrtguy on Sep 28, 2008, 9:36 PM

No nines at Mission View Thread - Tom P on Sep 28, 2008, 8:26 PM

There were plenty of nines at Mission, just - DaleP on Sep 28, 2008, 9:22 PM

You guys put on a great show - Gary B on Sep 28, 2008, 10:39 PM

Toploader bolts - sealant? View Thread - Doug on Sep 28, 2008, 7:43 PM

Use - Glen on Sep 29, 2008, 1:14 AM

Year of the Cammer / Bill Coon / Ken S. View Thread - Roger Gordon on Sep 28, 2008, 6:47 PM

Thanks, Roger. I haven't talked to Bill.... - KenS on Sep 29, 2008, 12:07 PM

Year of the Cammer / Bill Coon / Rockers View Thread - Roger Gordon on Sep 28, 2008, 6:33 PM

is Ford that unpopular? View Thread - daryl on Sep 28, 2008, 5:55 PM

Ford stuff - John on Sep 28, 2008, 6:09 PM

I see a few FE parts around the Houston area...but the prices they are asking is..... - winr1 on Sep 28, 2008, 6:23 PM

Re: is Ford that unpopular? - tim pahman on Sep 28, 2008, 6:54 PM

Welcome to the World of Ford and FE's.....no matter what it is- it's rare. - Beoweolf on Sep 28, 2008, 7:09 PM

best meet - Dan on Sep 28, 2008, 7:14 PM

Jefferson swap meet - Tbolt on Sep 28, 2008, 7:40 PM

Not much better in KS...... - Dale on Sep 29, 2008, 7:15 PM

Don't waste your time with general meets - go to the all Ford - John on Sep 30, 2008, 4:25 AM

Minimum Pan depth View Thread - Paul on Sep 28, 2008, 5:47 PM

Back in '64.... - KenS on Sep 28, 2008, 9:10 PM

Depth? - Paul on Sep 29, 2008, 7:57 AM

I have a stainless T pan,,,,,,, - garry on Sep 29, 2008, 3:41 AM

concerns - Tom P on Sep 29, 2008, 9:51 AM

fe's in the woods View Thread - tim pahman on Sep 28, 2008, 5:47 PM

Where are you located - Rick on Sep 28, 2008, 5:53 PM

Re: Where are you located - tim pahman on Sep 28, 2008, 6:51 PM

390s - 427Howard on Sep 28, 2008, 9:05 PM

Re: 390s - tim pahman on Sep 29, 2008, 7:28 PM

OT: But I could use some cam help here. View Thread - Lucas Massengale on Sep 28, 2008, 5:42 PM

Mod cams - Joe D. Craine on Sep 28, 2008, 7:43 PM

Sorry, yes 2valve cams - Lucas Massengale on Sep 28, 2008, 8:20 PM

You don't need to pull the engine to check...n/m - Dr. Mabuse on Sep 29, 2008, 2:36 AM

Stroker - Joe D. Craine on Sep 29, 2008, 6:38 AM

Lucas, did you sell your 65 Gal? - Bob on Sep 29, 2008, 11:56 AM

Still have it! - Lucas Massengale on Sep 29, 2008, 12:00 PM

Jay.... View Thread - Sohcbob on Sep 28, 2008, 5:13 PM

Unfortunately, no simple "yes" - Jay Brown on Sep 28, 2008, 5:25 PM

Yes - Sohcbob on Sep 28, 2008, 5:43 PM

The data... - Jay Brown on Sep 29, 2008, 5:51 PM

Kinda odd CJ block View Thread - Mario428 on Sep 28, 2008, 3:59 PM

Pretty normal piece - Hawkrod on Sep 28, 2008, 4:37 PM

Worth saving... - Jim on Sep 29, 2008, 3:52 AM

yes valuable - Kerry on Sep 29, 2008, 4:22 AM

Would someone mind explaining why the date is valuable? - $Bill on Sep 29, 2008, 5:59 AM

? and answer:Date Matching block, heads and even 9" case is all important to the numbers - qikBBstang on Sep 29, 2008, 7:05 AM

Mostly, its for the Concours - show car circuit. Just not normal folks - Beoweolf on Sep 29, 2008, 7:21 AM

Yeah, we check date codes on sheetmetal - Hawkrod on Sep 29, 2008, 7:26 AM

I understand the concourse restoration aspect to date codes........ - $Bill on Sep 29, 2008, 7:57 AM

That is a 68.5 date code, it is perfect for a very high dollar car like a GT500KR - Hawkrod on Sep 29, 2008, 8:09 AM

just suppose.... - ford429cjlover on Sep 29, 2008, 10:43 AM

Yes, $2200-2500 is the going rate for a Feb-March 68 block lately - Hawkrod on Sep 29, 2008, 11:16 AM

I gave you a 1 week old comp. 2500 plus shipping - Kerry on Sep 29, 2008, 6:44 PM

I have one too - std bore Jan '67 'S' block - Jeff on Sep 29, 2008, 6:48 PM

Re: I have one too - std bore Jan '67 'S' block - ford429cjlover on Sep 29, 2008, 6:51 PM

Re: I have one too - std bore Jan '67 'S' block - John on Sep 30, 2008, 4:29 AM

"s" block - ford429cjlover on Sep 30, 2008, 4:44 AM

What is an " S " Block - Dean on Sep 30, 2008, 2:02 PM

it's the "superman" 428 block.... - ford429cjlover on Sep 30, 2008, 2:19 PM

Block cast 352A - Dean on Sep 30, 2008, 2:26 PM

Block cast 352A - ford429cjlover on Sep 30, 2008, 2:36 PM

okay I checked the codes on mine.... - ford429cjlover on Sep 30, 2008, 5:34 PM

great block - Kerry on Oct 1, 2008, 5:32 AM

Re: great block - ford429cjlover on Oct 1, 2008, 8:49 AM

Well - Kerry on Oct 1, 2008, 6:28 PM

Torino question View Thread - David on Sep 28, 2008, 3:07 PM

Re: Torino question - mikegt500 on Sep 28, 2008, 5:07 PM

Re: Torino question - tim pahman on Sep 28, 2008, 6:57 PM

Thanks - David on Sep 28, 2008, 7:20 PM

Battery tray - Worth, Blaine on Sep 28, 2008, 7:48 PM

Re: Battery tray - tim pahman on Sep 29, 2008, 7:33 PM

Intake valve seat and face angles View Thread - Bill Ballinger on Sep 28, 2008, 2:47 PM

The CJ valves will accept a 50 degree face with decent margin... - Bob Sprowl on Sep 28, 2008, 5:35 PM

Thin margin @ 50 - Ray on Sep 28, 2008, 6:38 PM

That is what I was wondering, if going past 45 was an advantage - Bill Ballinger on Sep 29, 2008, 5:56 AM

50 degree valve angles? - griffith,chuck on Sep 29, 2008, 7:20 AM

It sound like a plan, I appreciate it - Bill Ballinger on Sep 30, 2008, 7:01 AM

SanJose Ca - Ray on Sep 30, 2008, 10:21 AM

hey Bill - griffith,chuck on Sep 30, 2008, 11:22 AM

OT/ Newsweek on racism View Thread - Bill Ballinger on Sep 28, 2008, 1:30 PM

scare tactics - steve on Sep 28, 2008, 1:46 PM

Related to bailout / tainted election - Chip on Sep 28, 2008, 1:53 PM

Re: Related to bailout / tainted election - ford-boy on Sep 28, 2008, 5:49 PM

Help is on the way... - Eric D on Sep 28, 2008, 2:10 PM

Eric - Gary B on Sep 28, 2008, 4:52 PM

Re: OT/ Newsweek on racism - Beoweolf on Sep 28, 2008, 3:27 PM

Re: OT/ Newsweek on racism - mikegt500 on Sep 28, 2008, 5:13 PM

Gang members and ex cons can vote - Frank Bowers on Sep 28, 2008, 5:36 PM

Once their sentence is complete... ex-felons can vote. - Beoweolf on Sep 28, 2008, 5:59 PM

The main thing to me is that winner be declared fair and square - Bill Ballinger on Sep 28, 2008, 6:08 PM

What the hell does this have to do with FE's??????? - Bobby Spears on Sep 28, 2008, 6:40 PM

Sorry Bobby, I just hope there are still parts to build them with - Bill Ballinger on Sep 28, 2008, 6:57 PM

Sorry Bobby - Ross on Sep 28, 2008, 7:42 PM

After the last 2 elections... I'm more worried about secure voting machines - Beoweolf on Sep 28, 2008, 6:45 PM

I know,its like trying to get anything done anymore - Bill Ballinger on Sep 28, 2008, 7:07 PM

gangs..... - ford429cjlover on Sep 29, 2008, 5:27 AM

My view is that if they are informed on issues - Bill Ballinger on Sep 29, 2008, 7:47 AM

Its all BS, smoke and mirrors, n/m - Pippin on Sep 28, 2008, 8:23 PM

I agree, this isn't a political Forum, but we have some very - DaleP on Sep 28, 2008, 9:28 PM

Gov't is so out of touch w/ the people it is a disgrace. Change LOL - qikBBstang on Sep 29, 2008, 7:40 AM

Re: Gov't is so out of touch w/ the people it is a disgrace. Change LOL - ford429cjlover on Sep 29, 2008, 11:32 AM

Someone send Bobby another cam to try! lol n/m - Chip on Sep 29, 2008, 4:14 PM

I took the runner up spot in the 7.0 hot rod class... View Thread - Smokin Joe on Sep 28, 2008, 11:06 AM

congrats - fordsel on Sep 28, 2008, 5:31 PM

Nice going!!..have any more pics of your car ?? - winr1 on Sep 28, 2008, 6:39 PM

Pics - Smokin Joe on Sep 30, 2008, 8:04 PM

Broken Computer.......DAMN IT!!!! LOL~ View Thread - Wes Adams Ford428CJ on Sep 28, 2008, 10:50 AM

Hang in there Wes - ezgoing on Sep 28, 2008, 8:38 PM

O/T Has anyone heard or have any info on Hartman Enterprises? View Thread - onesmrtguy on Sep 28, 2008, 10:17 AM

My friend has... - BattlestarGalactic on Sep 29, 2008, 8:07 AM

Hartman - Ron Heldak on Sep 29, 2008, 10:09 AM

Steve's Fastlane in Musclecar Enthusiast magazine this month View Thread - Royce on Sep 28, 2008, 9:24 AM

Pics of damage View Thread - Gary on Sep 28, 2008, 9:17 AM

How old are the valves? - Royce on Sep 28, 2008, 9:22 AM

Re: How old are the valves? - Gary on Sep 28, 2008, 9:59 AM

That head can be fixed - Barry R on Sep 28, 2008, 3:53 PM

Its been a long time since I've seen damage like that... - Dave Walters on Sep 28, 2008, 4:03 PM

Re: Its been a long time since I've seen damage like that... - Gary on Sep 28, 2008, 4:22 PM

Yup. that is plenty ugly Gary.... - DaleP on Sep 28, 2008, 11:19 PM

Distributor Advance Kits? View Thread - 67StangGT on Sep 28, 2008, 8:39 AM

Here you go - Royce on Sep 28, 2008, 9:14 AM

The Crane IS FOR DURASPARK ONLY , if you - Faron Rhoads on Sep 28, 2008, 9:46 AM

Re: The Crane IS FOR DURASPARK ONLY , if you - 67StangGT on Sep 28, 2008, 10:53 AM

No Springs, but - Faron Rhoads on Sep 28, 2008, 12:21 PM

Thanks - 67StangGT on Sep 29, 2008, 11:21 AM

Shoe - drawing of an FE Oil Pan? View Thread - Paul on Sep 28, 2008, 7:55 AM

I didn't get the pan drawing. - Dave Shoe on Sep 28, 2008, 8:09 AM

Anyone interested in posting some pics from the reunion..... View Thread - RonW on Sep 28, 2008, 7:38 AM

anyone iterested in posting - bill d "The Pride of S Ga" on Sep 28, 2008, 4:42 PM

Hey Bill......................... - RonW on Sep 28, 2008, 5:08 PM

re: Pics - 427Kevin on Sep 28, 2008, 7:02 PM

Kevin...................... - RonW on Sep 28, 2008, 7:31 PM

Alternative FE Rocker Ratios? Some other engine families use different ratio rockers for View Thread - qikBBstang on Sep 28, 2008, 7:09 AM

ratio - Dan on Sep 28, 2008, 8:20 AM

Ratios are available - Barry R on Sep 28, 2008, 3:49 PM

part numbers for header gaskets for a... View Thread - robert on Sep 27, 2008, 11:13 PM

EMC 406 still warm in the back of my truck............ View Thread - Blair Patrick on Sep 27, 2008, 8:23 PM

Good luck at the contest! - Jay Brown on Sep 27, 2008, 8:38 PM

Jay.................... - Blair Patrick on Sep 28, 2008, 12:06 AM

Good luck! - Ross on Sep 27, 2008, 8:43 PM

Best to you!!! n/m - KenS on Sep 27, 2008, 8:51 PM

Way cool Blair......also, what is the stroke and lift on the cam ?? - winr1 on Sep 27, 2008, 9:14 PM

Your Canadian friends say, Ehhhhhhhhhhhh! - Tom P on Sep 27, 2008, 10:14 PM

Stroke is stock 406............. - Blair Patrick on Sep 28, 2008, 12:14 AM

Best of luck Blair! - William Conley on Sep 27, 2008, 10:08 PM

Sounds really strong - Barry R on Sep 27, 2008, 10:55 PM

Barry, what about.................. - Blair Patrick on Sep 27, 2008, 11:06 PM

Hoping for the best Blair.. - DaleP on Sep 27, 2008, 11:10 PM

Thanks Dale....................... - Blair Patrick on Sep 27, 2008, 11:14 PM

Blair.. I will be talking to Bob about his stuff .. - DaleP on Sep 27, 2008, 11:19 PM

The "other guys" - Barry R on Sep 28, 2008, 7:45 AM

Barry, you need to have a talk with Art... - Jay Brown on Sep 28, 2008, 8:39 AM

I agree... - XR7 on Sep 28, 2008, 9:55 AM

Good luck Blair, Barry and Jim - Bill Ballinger on Sep 28, 2008, 2:52 PM

Don R., gopher, and Robbie........................ View Thread - RonW on Sep 27, 2008, 7:51 PM

Re: Don R., gopher, and Robbie........................ - Falconred on Sep 29, 2008, 7:07 AM

Found out why engine is toast!!! View Thread - Gary on Sep 27, 2008, 7:39 PM

Sounds like the exhaust valve failed. - Dee on Sep 27, 2008, 8:04 PM

Steam breaks head off the exhaust valve? - Jay Brown on Sep 27, 2008, 9:36 PM

Re: Steam breaks head off the exhaust valve? - Gary on Sep 27, 2008, 10:01 PM

All out FE - Jay Brown on Sep 27, 2008, 10:56 PM

something like this? - XR7 on Sep 28, 2008, 10:02 AM

Here's my thought... - Steve Roehrs on Sep 29, 2008, 6:17 AM

The Year of the Cammer / Bill Coon View Thread - Roger Gordon on Sep 27, 2008, 7:24 PM

Everyone has their own opinions.... - Brent on Sep 27, 2008, 7:46 PM

I agree with 1/2 of that - Ross on Sep 27, 2008, 7:48 PM

One more thing.... - Brent on Sep 27, 2008, 7:54 PM

LOL! Here we go again... - Jay Brown on Sep 27, 2008, 10:33 PM

Good data - Ross on Sep 28, 2008, 1:20 PM

428 and autolite carburetors View Thread - Randy on Sep 27, 2008, 6:32 PM

Mr White says a 4100 with 1.08 in 1966 on an FE is a Cali smog carb..... - winr1 on Sep 27, 2008, 8:27 PM

Re: Mr White says a 4100 with 1.08 in 1966 on an FE is a Cali smog carb..... - Randy on Sep 27, 2008, 8:40 PM

Try this - winr1 on Sep 27, 2008, 8:58 PM

Re: Try this - Randy on Sep 27, 2008, 9:01 PM

Cool!!..dont know what happened with the address. - winr1 on Sep 27, 2008, 9:02 PM

Re: Cool!!..dont know what happened with the address. - Bobby Spears on Sep 28, 2008, 9:51 AM

428 carb - Tim Mc on Sep 28, 2008, 11:49 AM

1.08 plus a 735 Holley - WerbyFord on Sep 28, 2008, 4:46 PM

Now that's interesting!.... - Dr. Mabuse on Sep 28, 2008, 6:24 PM

Thanks and more questions - Randy on Sep 30, 2008, 7:09 PM

Good Question! 66-67 4100s: - WerbyFord on Sep 30, 2008, 8:59 PM

I have used the larger 4100 on my 7 Litre with Crane Fireball cam... - Bob Sprowl on Sep 28, 2008, 5:30 PM

o/t have some brake questions View Thread - robert on Sep 27, 2008, 6:10 PM

shoes - Bob C on Sep 27, 2008, 6:21 PM

not sure im following you bob... - robert on Sep 27, 2008, 6:54 PM

re-shoes - Joe D. Craine on Sep 27, 2008, 7:18 PM

joe i had not noticed that, doh! so which... - robert on Sep 27, 2008, 7:33 PM

joe upon further study of the book, it apears im... - robert on Sep 27, 2008, 7:40 PM

Short shoe is primary always. - Bobby Spears on Sep 27, 2008, 8:25 PM

well to no suprise the box had no.... - robert on Sep 27, 2008, 9:47 PM

O/T- but screaming for a 427 View Thread - MeanGene on Sep 27, 2008, 4:15 PM

studes are nice cars - fordsel on Sep 27, 2008, 4:23 PM

Gene.....It's an incurable disease! - Craig on Sep 27, 2008, 5:40 PM

Gold Mine - MeanGene on Sep 27, 2008, 7:56 PM

Better measure how deep.... - Beoweolf on Sep 28, 2008, 5:04 PM

This '62 - MeanGene on Sep 28, 2008, 5:24 PM

What are the torque specs on .... View Thread - W.KLINE on Sep 27, 2008, 12:31 PM

Close as I recall.... - BattlestarGalactic on Sep 27, 2008, 1:18 PM

torque specs - Donnie on Sep 27, 2008, 1:53 PM

Axle Removal View Thread - Tim on Sep 27, 2008, 12:25 PM

Slide hammer - Barry Byer on Sep 27, 2008, 12:29 PM

If you don't have a slide hammer. - Barry Gaugler on Sep 27, 2008, 1:14 PM

Re: If you don't have a slide hammer. - Tim on Sep 27, 2008, 1:16 PM

Get a chain - Jay Brown on Sep 27, 2008, 1:25 PM

Drastic measures indees... - Terry on Sep 27, 2008, 2:53 PM

I take it the Seal is disposable at that point. :) - Wayne K. on Sep 27, 2008, 4:24 PM

YOU are correct, sir! - Jay Brown on Sep 27, 2008, 6:35 PM

Re: Get a chain - Barry Byer on Sep 27, 2008, 4:54 PM

Heads are lighter... - Jay Brown on Sep 27, 2008, 6:37 PM

Don't laugh guys, I have almost yanked a truck off the jackstands - Bill Ballinger on Sep 27, 2008, 6:00 PM

Re: Axle Removal - Bobby Spears on Sep 27, 2008, 1:53 PM

That's a great method! - Jay Brown on Sep 27, 2008, 6:40 PM

Re: That's a great method! - Bobby Spears on Sep 27, 2008, 8:39 PM

Re: Axle Removal - john on Sep 28, 2008, 3:58 AM

You got to figure there's got to be a few screwed up housings that may never give up the - qikBBstang on Sep 28, 2008, 7:21 AM

you could always - Kyle on Sep 29, 2008, 5:35 PM

on the issue of poriosity in aluminum heads would "KW Block Seal" work.. View Thread - Mike U. on Sep 27, 2008, 10:56 AM

If you can... - Jay Brown on Sep 27, 2008, 11:19 AM

Jay I really pray it doesnt come to that, but its good to know.. - Mike U. on Sep 27, 2008, 11:40 AM

Yes and maybe. - Gary on Sep 28, 2008, 7:17 PM

Moroso Ceramic Seal - Falcon67 on Sep 28, 2008, 8:23 PM

O/T WAMU, IndyMac failure and forum members View Thread - 1960 Town Vic on Sep 27, 2008, 8:34 AM

It should not have an effect unless you are foolish or an employee of them - Royce on Sep 27, 2008, 8:46 AM

I don't see this as the time to be judgemental - 1960 Town Vic on Sep 27, 2008, 9:52 AM

Royce was right on the mark actually. - Wayne K. on Sep 27, 2008, 11:11 AM

An adjustable rate mortgage is asking for trouble. I won't call it foolish,.... - David F. on Sep 27, 2008, 1:51 PM

Informational links on FDIC - Rich Ferguson on Sep 27, 2008, 10:16 AM

R.E. FDIC Ins. limits. CDAR is a banking acronym for a program that allows you - Dave Eames on Sep 27, 2008, 12:46 PM

Market reaction - Jay Brown on Sep 27, 2008, 10:00 AM

Re: Market reaction - Bobby Spears on Sep 27, 2008, 10:10 AM

Ugly world right now. - Barry Byer on Sep 27, 2008, 11:52 AM

In the great depression - 1960 Town Vic on Sep 27, 2008, 11:58 AM

Re: Ugly world right now. - Bobby Spears on Sep 27, 2008, 2:06 PM

We really have to, there is no choice - Bill Ballinger on Sep 27, 2008, 12:51 PM

Not no but HELL NO to the bail out! - Bob Sprowl on Sep 27, 2008, 5:28 PM

You are not right - Ross on Sep 27, 2008, 6:30 PM

You saw the same debate I did, how so very right - Bill Ballinger on Sep 27, 2008, 7:59 PM

As far as Bush and the Republicans - Too little, too late. - Beoweolf on Sep 27, 2008, 8:26 PM

Clinton and Carter (EDITED) - Ross on Sep 27, 2008, 8:29 PM

Although not economy related - Ross on Sep 27, 2008, 8:27 PM

Re: Although not economy related - Beoweolf on Sep 27, 2008, 9:58 PM

Interesting - Ross on Sep 27, 2008, 10:11 PM

One other thing - Ross on Sep 27, 2008, 10:18 PM

Interesting video, I agree don't re-elect them - Gary B on Sep 28, 2008, 8:08 AM

So you are trying to say the Republicans were honestly trying to fix the problem - Royce on Sep 28, 2008, 9:11 AM

double post sorry - Gary B on Sep 28, 2008, 12:10 PM

Yes, for a long time - Gary B on Sep 28, 2008, 12:14 PM

I would just like to say that "Republican" isn't "Republican" anymore.. - Nash on Sep 28, 2008, 6:25 PM

Yet GDP continues to rise - Ross on Sep 28, 2008, 7:22 PM

You hit the nail on the head. This a political stampede - Bill Ballinger on Sep 28, 2008, 7:37 PM

Bill, very very good post - Ross on Sep 28, 2008, 7:48 PM

With credit cards unregulated.... I find it kind of hard to put too much blame on consumer - Beoweolf on Sep 29, 2008, 1:51 PM

Isn't that the truth? Both of my kids got piles of credit card applications - Bill Ballinger on Sep 29, 2008, 10:39 PM

The Russians are coming? - steve meyer on Sep 27, 2008, 9:34 PM

Democrats are trying to add BS to the bailout - Ross on Sep 27, 2008, 10:00 PM

Actually history and business are two of my stronger subjects - Bill Ballinger on Sep 28, 2008, 2:30 PM

BTW, the agenda for this debate was foreign policy - Bill Ballinger on Sep 28, 2008, 1:20 PM

Traditional Lending Rules Were There For A Reason - Wreckless Warren on Sep 27, 2008, 10:53 AM

Still hand-to-mouth in our household. - Mike on Sep 27, 2008, 11:10 AM

Pension funds at risk also? - Tim O'Connor on Sep 27, 2008, 11:52 AM

This mess didn't start yesterday .... - Beoweolf on Sep 27, 2008, 12:33 PM

scary situation..... - ford429cjlover on Sep 27, 2008, 3:26 PM

Worthless paper - Bart on Sep 27, 2008, 4:06 PM

those who don't learn from history.... - ford429cjlover on Sep 27, 2008, 4:41 PM

Ron Paul - Nash on Sep 27, 2008, 7:15 PM

So did many other Republicans - Royce on Sep 28, 2008, 9:50 AM

Another video - Gary B on Sep 28, 2008, 10:42 PM

This video is more entertaining: - Nash on Sep 28, 2008, 11:29 PM

Re: Another video - ford429cjlover on Sep 29, 2008, 11:20 AM

Partly, yes it is - Royce on Sep 29, 2008, 11:45 AM

i guess it's just a question of perspective.... - ford429cjlover on Sep 29, 2008, 11:58 AM

Re: i guess it's just a question of perspective.... - Tom C on Sep 29, 2008, 2:06 PM

Banking Industry failures drop into my world - Steve A on Sep 27, 2008, 11:37 PM

Let it BURN... - Tommy-T on Sep 28, 2008, 11:27 AM

Re: Let it BURN... - ford429cjlover on Sep 29, 2008, 11:43 AM

Hey Mike Gaffney View Thread - Tom P on Sep 26, 2008, 11:12 PM

Sorry I missed you.. - DaleP on Sep 26, 2008, 11:28 PM

We got to see Mike - Tom P on Sep 27, 2008, 7:59 PM

Yup, Mike G. is definately a cool guy and a pleasure to - DaleP on Sep 27, 2008, 11:31 PM

Re: Yup, Mike G. is definately a cool guy and a pleasure to - Rory McNeil on Sep 28, 2008, 12:36 AM

Saturday was a great show - Gary B on Sep 28, 2008, 12:33 PM

good machine shop in Indy? View Thread - Joe on Sep 26, 2008, 11:04 PM

machine shop in Indy - Andy on Sep 27, 2008, 4:59 AM

Re: machine shop in Indy - steve on Sep 27, 2008, 5:20 AM

Holy Sh*t !!! - Andy on Sep 27, 2008, 6:22 AM

Sorry - Joe on Sep 28, 2008, 10:20 PM

Re: Sorry - Andy on Sep 29, 2008, 5:55 AM

are marine 427's side oilers or not? View Thread - jeff on Sep 26, 2008, 10:24 PM

Marine blocks. - RJP on Sep 26, 2008, 11:42 PM

There are at least a few genuine ChrisCraft sideoilers - qikBBstang on Sep 27, 2008, 4:25 AM

You need to expect nothing and be glad if you find anything usable - Royce on Sep 27, 2008, 6:37 AM

I agree with Royce - Earl on Sep 27, 2008, 8:33 AM

Re: You need to expect nothing and be glad if you find anything usable - Bobby Spears on Sep 27, 2008, 9:59 AM

Both Genesis and Pond make cast iron side oilers - Royce on Sep 27, 2008, 3:28 PM

blocks - Mark on Sep 27, 2008, 10:22 AM

Engine Masters project update View Thread - Barry R on Sep 26, 2008, 10:18 PM

Barry, it's going to be difficult for me to.... - KenS on Sep 26, 2008, 10:47 PM

Barry, you've proven two things... - DaleP on Sep 26, 2008, 11:15 PM

good job so far - Tom P on Sep 26, 2008, 11:28 PM

Nothing custom - but - Barry R on Sep 27, 2008, 5:17 AM

Barry just a what if just because: I sort of picked up that at least one* of the others - qikBBstang on Sep 27, 2008, 3:58 AM

Nice work - Ross on Sep 27, 2008, 4:51 AM

David Vizard likes to run really low LSA/ICL combos. - Brent on Sep 27, 2008, 5:29 AM

EMC-Fe - griffith,chuck on Sep 27, 2008, 6:56 AM

Good luck at the event! - Jay Brown on Sep 27, 2008, 7:04 AM

Headers - Chip on Sep 27, 2008, 9:32 AM

Barry, you're on the right track with the 99� CL. - Gary Blair on Sep 27, 2008, 9:53 AM

Good luck Barry! - William Conley on Sep 27, 2008, 10:29 AM

Good luck Barry.... - Mike U. on Sep 27, 2008, 10:29 AM

I love this stuff... - Lance H on Sep 27, 2008, 11:57 AM

Yes!!...Good luck Barry!!! - winr1 on Sep 27, 2008, 9:22 PM

Alky timing View Thread - Royce Brechler on Sep 26, 2008, 10:12 PM

Royce, you probably need to pull advance---- - KenS on Sep 26, 2008, 10:26 PM

Re alky timing - Joe on Sep 27, 2008, 4:43 AM

O/T Hey you ChevyForum guys, I mean Mopar Forum no-no I mean FordFE Forum guys View Thread - qikBBstang on Sep 26, 2008, 7:49 PM

o/t C6 leak (front pump) repair View Thread - derek on Sep 26, 2008, 7:07 PM

c6 leak - Alan on Sep 26, 2008, 7:30 PM

Re: c6 leak - derek on Sep 26, 2008, 8:05 PM

Re: c6 leak - coogs on Sep 27, 2008, 1:29 PM

Loosen the lock-nut & tighten the 2nd gear band tight to the drum, this will - Dave Eames on Sep 28, 2008, 2:46 PM

390 block to 428 View Thread - Tim on Sep 26, 2008, 6:57 PM

The last time he was discussed - Gary B on Sep 26, 2008, 8:24 PM

Diminishing returns - Barry R on Sep 26, 2008, 9:41 PM

390 to 428 - jeff on Sep 26, 2008, 10:33 PM

Not reliable PERIOD. - StarlinerRon on Sep 26, 2008, 11:00 PM

I wouldn't say period.... - Brent on Sep 27, 2008, 6:23 AM

I'd trade bore size for stability every time - Ross on Sep 27, 2008, 5:14 AM

I've seen it done... - Dr. Mabuse on Sep 27, 2008, 5:51 AM

390 block to 428 - bill angleton on Sep 27, 2008, 8:41 AM

minimum overbore, maximum stroke - these blocks are old. - Beoweolf on Sep 27, 2008, 12:42 PM

Re: minimum overbore, maximum stroke - these blocks are old. - coogs on Sep 27, 2008, 1:36 PM

390 to 428 - fordsel on Sep 27, 2008, 4:36 PM

I bought one of those blocks from OR. ..... - Smokin Joe on Sep 28, 2008, 9:14 AM

SOHC Rockers View Thread - Jim on Sep 26, 2008, 5:46 PM

Blueprints - Vern on Sep 28, 2008, 4:37 PM

opinions wanted View Thread - Anonymous on Sep 26, 2008, 4:28 PM

Gonna sell it or drive it or ??? - Marty Haynes on Sep 26, 2008, 4:52 PM

adding a stick - Bob Hasty on Sep 26, 2008, 5:34 PM

I agree with Marty..... - Doug S on Sep 26, 2008, 5:37 PM

Stick - Anonymous on Sep 26, 2008, 7:23 PM

Re: opinions wanted - e. philpott on Sep 26, 2008, 8:03 PM

"View thread" works...clicking topic does not View Thread - Jim Whitton on Sep 26, 2008, 3:47 PM

Re: "View thread" works...clicking topic does not - Brandon on Sep 26, 2008, 3:50 PM

Thanks n/m - Bill Ballinger on Sep 26, 2008, 3:51 PM

Network54 is having problems right now. - Dave Shoe on Sep 26, 2008, 4:07 PM

n/m View Thread - qikBBstang on Sep 26, 2008, 3:44 PM

You have to open the entire "view thread" for now - P on Sep 26, 2008, 5:08 PM

I can even post, but I can't see the results except the title. View Thread - Bill Ballinger on Sep 26, 2008, 3:35 PM

Yup, blank pages, you can't get past the message index. View Thread - Barry Byer on Sep 26, 2008, 3:35 PM

Re: Yup, blank pages, you can't get past the message index. - Brandon on Sep 26, 2008, 3:50 PM

Goggle analytics is killing Network 54, unless you use "chrome" - Pippin on Sep 26, 2008, 10:17 PM

Not just this forum - Gary B on Sep 26, 2008, 8:28 PM

Yep - MeanGene on Sep 27, 2008, 6:28 PM

Is anyone having trouble with blank pages? View Thread - Bill Ballinger on Sep 26, 2008, 3:32 PM

Yes, sometimes same here using Firefox... n/m - Andre on Sep 27, 2008, 2:53 AM

<< Prev

24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!