332-428 Ford FE Engine Forum (Page 38 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 50 Visitors 64squire, Bad427stang, bbr60, BillBallinger120, Garyford, machoneman, qikbbstang, Ranchero, tbolt2, texoutsider, 40 guests

Not logged in | Login | Create Account

Post Now!

oil pan is hitting my crossmember what can i do..... View Thread - Donnie on Sep 18, 2008, 8:57 PM

Interesting - John on Sep 18, 2008, 9:26 PM

depth - Donnie on Sep 18, 2008, 9:39 PM

Crossmember - Roberson on Sep 19, 2008, 3:14 AM

Oil Pan Mod - Charlie on Sep 19, 2008, 4:04 AM

crossmember - KC on Sep 19, 2008, 4:15 AM

Re: oil pan is hitting my crossmember what can i do..... - Wreckleless Warren on Sep 19, 2008, 5:03 AM

Two ways to go Donnie... - Dave Walters on Sep 19, 2008, 5:25 AM

Canton 8 qt T pan - Charlie on Sep 19, 2008, 6:27 AM

Did the pan touch the crossmember before the mount bolts were fully seated? Is...... - Rod C on Sep 19, 2008, 7:46 AM

I used a Milodon deep sump... with hookers, No problems. - Beoweolf on Sep 19, 2008, 9:04 AM

pan problems - Donnie on Sep 19, 2008, 8:38 PM

do you weld?... - Dr. Mabuse on Sep 20, 2008, 11:09 AM

welding - Donnie on Sep 20, 2008, 3:16 PM

O/T- Trip to B.C ... View Thread - Mike Gaffney on Sep 18, 2008, 8:52 PM

Better get a cow catcher on that thing.... - Mark Pruitt on Sep 18, 2008, 9:50 PM

Re: O/T- Trip to B.C ... - Rory McNeil on Sep 19, 2008, 8:47 AM

Here already? - Tom P on Sep 19, 2008, 11:21 AM

I'll be at Mission Friday night hanging out, and - DaleP on Sep 19, 2008, 6:35 PM

forum dinner - Gord Bradley on Sep 19, 2008, 8:46 PM

Yup, that sure is decent of Rory... - DaleP on Sep 19, 2008, 9:01 PM

Re: Yup, that sure is decent of Rory... - Rory McNeil on Sep 19, 2008, 10:56 PM

Mc Donalds? - Tom P on Sep 20, 2008, 12:21 AM

McDonalds has Whiskey now ?? - DaleP on Sep 20, 2008, 8:21 AM

SOHC Rocker Failure Analysis View Thread - Jay Brown on Sep 18, 2008, 6:47 PM

playing Quincy - Tom P on Sep 18, 2008, 7:20 PM

Tom, you might not have enough spring pressure..... - Mike Burch on Sep 18, 2008, 7:27 PM

Rockers - Jesse Williams on Sep 18, 2008, 7:21 PM

Observations - Joe D. Craine on Sep 18, 2008, 7:22 PM

Rollers - Jay Brown on Sep 18, 2008, 7:28 PM

I believe your initial instincts are right... - Mike Burch on Sep 18, 2008, 7:23 PM

Caged vs loose - Howie on Sep 18, 2008, 7:40 PM

Rockwell C.... - EricOldham on Sep 18, 2008, 7:51 PM

I agree the RAS axles are too soft - William Conley on Sep 18, 2008, 9:49 PM

Thanks for the comments... - Jay Brown on Sep 19, 2008, 6:12 AM

I agree with EricOldham's post below - William Conley on Sep 19, 2008, 8:29 AM

For Really Accurate info on Needle Bearings - Howie on Sep 19, 2008, 11:20 AM

Have you .... - Mike Gaffney on Sep 18, 2008, 8:36 PM

Lower spring load - Jay Brown on Sep 19, 2008, 6:10 AM

I do not think the load is understood - 1960 Town Vic on Sep 18, 2008, 8:47 PM

something to be said about simple flat/slipper followers, they take - Pippin on Sep 18, 2008, 10:00 PM

Re: I do not think the load is understood - Vern. on Sep 18, 2008, 11:46 PM

Lash - Jay Brown on Sep 19, 2008, 6:01 AM

rockers - Keith Craft on Sep 18, 2008, 10:57 PM

T&Ds - Jay Brown on Sep 19, 2008, 5:57 AM

SOHC Rockers, Dove - Keith Craft on Sep 19, 2008, 11:45 PM

SOHC rockers - griffith,chuck on Sep 19, 2008, 3:11 AM

SOHC rockers - RWJ on Sep 19, 2008, 5:56 AM

That's right... - Jay Brown on Sep 19, 2008, 6:07 AM

Pins & rollers - Barry R on Sep 19, 2008, 5:48 AM

DLC... - Dr. Mabuse on Sep 19, 2008, 2:41 PM

After another look - 1960 Town Vic on Sep 19, 2008, 6:12 AM

So... - Jay Brown on Sep 19, 2008, 6:16 AM

.006 clearance - EricOldham on Sep 19, 2008, 7:02 AM

Thanks... - Jay Brown on Sep 19, 2008, 7:19 AM

Jay, I know it a different cam, but what was the "take-up" ramp on the - Pippin on Sep 19, 2008, 8:57 PM

You can calculate the load capcity on a needle bearing set - Ross on Sep 19, 2008, 7:24 AM

Another thought - Ross on Sep 19, 2008, 7:42 AM

Rocker vs. Lifter - Jay Brown on Sep 19, 2008, 8:01 AM

Yep - Ross on Sep 19, 2008, 8:08 AM

In my opinion - 1960 Town Vic on Sep 19, 2008, 12:28 PM

Needle bearing types - Woody Owens on Sep 19, 2008, 7:23 AM

T&Ds - Vern on Sep 19, 2008, 8:00 AM

I'll be taking the T&Ds apart... - Jay Brown on Sep 19, 2008, 8:14 AM

Pretty sure that the roller is hardened... - Jay Brown on Sep 19, 2008, 8:03 AM

General SOHC question: are the adjusters a ball and socket set-up on the valve contact.... - Rod C on Sep 19, 2008, 8:05 AM

They have an "elephant's foot" end... - Jay Brown on Sep 19, 2008, 8:09 AM

Another approach - FEDER on Sep 19, 2008, 8:45 AM

Schubeck - Ross on Sep 19, 2008, 9:06 AM

Re: Schubeck - F570rd on Sep 19, 2008, 10:04 AM

Try to contact first and dont order from the site - Ross on Sep 19, 2008, 12:01 PM

Lifters - Ric G. on Sep 19, 2008, 9:08 AM

Cammers need a better rocker ratio... - Mike Braun on Sep 19, 2008, 8:51 AM

SOHC Rocker Failure Analysis - Bill Angleton on Sep 19, 2008, 8:48 AM

Anybody else had the same issues? - Tom P on Sep 19, 2008, 11:48 AM

Is it possible to just install a roller bearing IN PLACE of a roller and - Pippin on Sep 19, 2008, 9:03 PM

Jay, excellent analysis...I'm thinking that the low rocker ratio - jim carlson on Sep 19, 2008, 3:29 PM

Roller analysis - Jake R on Sep 19, 2008, 4:53 PM

SOHC rockers - RWJ on Sep 19, 2008, 5:52 PM

Agree 100% - Jay Brown on Sep 19, 2008, 6:05 PM

Lift & Rates? - Vern. on Sep 19, 2008, 9:32 PM

Caged Needle Bearings - Mike Burch on Sep 19, 2008, 7:41 PM

I agree with Mike.. Just look at the number of - DaleP on Sep 19, 2008, 9:05 PM

I would tend to agree also... - Jay Brown on Sep 19, 2008, 10:29 PM

Except those needles in the first pic. - Dave King on Sep 19, 2008, 11:14 PM

Over think the problem? - Rick Lake on Sep 20, 2008, 3:31 AM

FE + master cylinder View Thread - Mike Keenan on Sep 18, 2008, 5:50 PM

Re: FE + master cylinder - Monty on Sep 18, 2008, 6:35 PM

Torino bad as well, maybe worse........ - Robert on Sep 18, 2008, 7:34 PM

Re: FE + master cylinder - Bob on Sep 18, 2008, 7:50 PM

198X Dodge van MC - michael on Sep 18, 2008, 9:24 PM

The Mopar master cylinder that you should use... - Dave Walters on Sep 19, 2008, 5:31 AM

Difference between Comp roller set and Cloyes roller set.... View Thread - winr1 on Sep 18, 2008, 5:39 PM

I use the Cloyes Tru-Roller stuff - Barry R on Sep 18, 2008, 6:54 PM

Thanks Barry!! - winr1 on Sep 18, 2008, 7:47 PM

Starters??? View Thread - ford-boy on Sep 18, 2008, 5:34 PM

I would think - Bob Hasty on Sep 18, 2008, 6:47 PM

Stock type starters - Rory McNeil on Sep 19, 2008, 9:08 AM

Re: Starters??? - mike on Sep 19, 2008, 4:29 PM

It's ok to use a rebuilt factory starter - ezgoing on Sep 20, 2008, 9:33 AM

427 and sleeve question View Thread - chrish on Sep 18, 2008, 4:14 PM

sounds like a - XR7 on Sep 18, 2008, 5:43 PM

sleeves - Anonymous on Sep 18, 2008, 7:47 PM

Sleeves - Keith Craft on Sep 18, 2008, 11:02 PM

Re: 427 and sleeve question - Jay Zolko on Sep 18, 2008, 8:14 PM

Stroker and bore - Anonymous on Sep 18, 2008, 10:06 PM

Could someone gonkulate for me? View Thread - Charlie on Sep 18, 2008, 11:44 AM

While you are waiting, I will guess (but I know nothing). - Bob on Sep 18, 2008, 12:53 PM

more details - Charlie on Sep 18, 2008, 1:18 PM

Ok finally here is the "Gonkulator" - WerbyFord on Sep 25, 2008, 9:38 PM

Autohaus posting in classifieds ??? View Thread - pmw on Sep 18, 2008, 7:57 AM

Not familiar with the pedigree of dealer,but Super Gas legal in what decade? - bbr60 on Sep 18, 2008, 8:10 AM

Re: Autohaus posting in classifieds ??? - Jeff Tepper on Sep 18, 2008, 8:30 AM

Autohaus/Los Gatos - nhcammer on Sep 18, 2008, 9:31 AM

rebody - Tom P on Sep 18, 2008, 10:01 AM

Tom, would that T-bolt be Pederson's? - Greg on Sep 18, 2008, 10:13 AM

not that one - Tom P on Sep 18, 2008, 11:02 AM

Not sure of the original owners at all. - Greg on Sep 18, 2008, 12:07 PM

Re: Autohaus/Los Gatos - Rory McNeil on Sep 18, 2008, 10:03 AM

NHCammer - Jim W on Sep 18, 2008, 2:04 PM

'67 Gal XL - nhcammer on Sep 18, 2008, 2:18 PM

autuhaus/slaughterhaus...run from them..run from.. - Scrap Iron on Sep 18, 2008, 1:02 PM

autohaus - gopher on Sep 18, 2008, 3:41 PM

Autohaus - Lars on Sep 18, 2008, 4:00 PM

O/T Awesome mini-V8 View Thread - mikegt500 on Sep 18, 2008, 7:50 AM

Wow.... - BattlestarGalactic on Sep 18, 2008, 8:58 AM

Guy in town has a bunch - MeanGene on Sep 18, 2008, 9:04 PM

Randy Payne View Thread - Falconred on Sep 18, 2008, 7:30 AM

Who needs SOHC rockers View Thread - Keith Craft on Sep 17, 2008, 10:37 PM

keith they were RAS and Dove.... - robert on Sep 17, 2008, 11:38 PM

Re: Who needs SOHC rockers - Don Woodruff on Sep 18, 2008, 7:09 AM

Quite plausible. - Dave Shoe on Sep 18, 2008, 8:36 AM

Chain - Keith Craft on Sep 18, 2008, 11:08 PM

SOHC Rockers - Jay Brown on Sep 18, 2008, 7:51 AM

Jay, several observers have posited the notion... - Greg on Sep 18, 2008, 8:39 AM

The problem - Jay Brown on Sep 18, 2008, 8:56 AM

I agree that optics could be tough but,... - Greg on Sep 18, 2008, 10:03 AM

The harmonics are - john vermeersch on Sep 18, 2008, 10:05 AM

I had that same problem... - Jay Brown on Sep 18, 2008, 10:37 AM

I do not profess to be an expert on this by any means.... - Andy on Sep 18, 2008, 6:30 PM

John Vermeerech I agree with you. - Bill Orrick on Sep 18, 2008, 6:59 PM

pinning cam gears - Keith Craft on Sep 18, 2008, 11:19 PM

who needs SOHC rockers. - Bill Orrick on Sep 18, 2008, 9:38 AM

I was thinking about your setup... - Jay Brown on Sep 18, 2008, 10:40 AM

Hey Jay - Howie on Sep 18, 2008, 5:50 PM

I would be interested in a set. - michael on Sep 18, 2008, 10:17 AM

Keith, I could use 4 sets,IF, they don't ...... - Rick Toombs on Sep 18, 2008, 5:45 PM

Rockers to be ordered - Keith Craft on Sep 18, 2008, 11:31 PM

It's good to see some engineering horsepower being applied to this problem. - William Conley on Sep 19, 2008, 8:38 AM

Comments please!!! I just got the Ross pistons.... View Thread - KenS on Sep 17, 2008, 10:36 PM

Coatings - Keith Craft on Sep 17, 2008, 10:42 PM

Thanks, Keith.... - KenS on Sep 17, 2008, 10:57 PM

Coatings - Barry R on Sep 18, 2008, 4:53 AM

Man you nailed it on the skirt coating on Speed-Pro now - Bill Ballinger on Sep 18, 2008, 10:02 AM

Ken... - Dave Walters on Sep 18, 2008, 6:01 AM

I've used Techline coatings... - Jay Brown on Sep 18, 2008, 7:56 AM

MY Thanks to all who chimed.... - KenS on Sep 18, 2008, 9:00 PM

O/T 64 Fairlane rear ride height View Thread - Todd on Sep 17, 2008, 9:34 PM

on mine - Tom P on Sep 17, 2008, 9:39 PM

That was quick - Todd on Sep 17, 2008, 10:26 PM

O/T Ignition switch .... View Thread - Mike Gaffney on Sep 17, 2008, 8:23 PM

Is there a little hole beside the key slot? If so... - Marty Haynes on Sep 17, 2008, 8:37 PM

Yes, turn key to accessories, depress the the release pin ... - winr1 on Sep 17, 2008, 9:00 PM

Thanks ... - Mike Gaffney on Sep 18, 2008, 11:30 AM

This engine is a work of art !! View Thread - Mark on Sep 17, 2008, 7:33 PM

Ooohh........that is one nice engine!! - winr1 on Sep 17, 2008, 7:52 PM

Nice: CNC everything..... - Bob on Sep 17, 2008, 8:18 PM

says 760 cube - Tom P on Sep 17, 2008, 8:40 PM

I've always wanted to make my own block & heads, fe of course. But.... - Andy on Sep 17, 2008, 8:32 PM

I'm not abandoning FE's but... - Tom P on Sep 17, 2008, 9:09 PM

Very Beautiful!!! But a more reasonably sized.... - KenS on Sep 17, 2008, 9:51 PM

ken i know what you mean i really wish i was over with... - robert on Sep 17, 2008, 11:40 PM

Cylinder heads - Barry R on Sep 18, 2008, 4:58 AM

Sonny's (SAR) has had a hemi-headed..... - Bob on Sep 18, 2008, 7:27 AM

picture doesn't load for me....... - XR7 on Sep 18, 2008, 8:58 AM

Attention Tim Maloney View Thread - Roger Gordon on Sep 17, 2008, 6:55 PM

I want to thank qikBBstang View Thread - Howie on Sep 17, 2008, 5:04 PM

Now that's an unusual post... but - DaleP on Sep 17, 2008, 8:24 PM

I agree.... - Dave Walters on Sep 18, 2008, 6:05 AM

So Cal show tonight... but it's only Wednesday? View Thread - Tom P on Sep 17, 2008, 2:49 PM

It's also Route 66 Rendezvous this weekend... - Tommy-T on Sep 17, 2008, 3:16 PM

If... - Tom P on Sep 17, 2008, 4:18 PM

Re: It's also Route 66 Rendezvous this weekend... - Scode67FB on Sep 17, 2008, 6:41 PM

Someone please run this combo on desktop dyno View Thread - Dean on Sep 17, 2008, 2:36 PM

Don't really need a dyno - Tom P on Sep 17, 2008, 4:22 PM

Re: Don't really need a dyno - Dave Walters on Sep 18, 2008, 5:34 AM

here it is - Kyle on Sep 17, 2008, 4:44 PM

I honestly don't know hp/torque. - kim robertson on Sep 18, 2008, 12:25 AM

yeah i'll run it through - Kyle on Sep 19, 2008, 9:21 AM

the stock iron intake is your anchor, it will run great, but - Pippin on Sep 17, 2008, 8:44 PM

head work, - Todd Wimberly on Sep 18, 2008, 10:59 AM

I get 10.42cr and 320hp - WerbyFord on Sep 25, 2008, 8:47 PM

Thrust Bearing Part Number View Thread - Gerry on Sep 17, 2008, 1:27 PM

Bearing - Ross on Sep 17, 2008, 1:51 PM

early fe mains - john tolliver on Sep 18, 2008, 4:40 AM

OT but of the topics here View Thread - Joe D. Craine on Sep 17, 2008, 1:05 PM

Olds Edel's do need some work - Dave Walters on Sep 17, 2008, 2:16 PM

Untitled View Thread - opel514 on Sep 17, 2008, 10:23 AM

Available new - Barry R on Sep 17, 2008, 10:31 AM

Carb spacer View Thread - gord on Sep 17, 2008, 8:27 AM

A/F ratio doesn't change - Brent on Sep 17, 2008, 8:58 AM

Which is better then for streetablility? - Damon on Sep 17, 2008, 3:37 PM

Well generally.... - Brent on Sep 17, 2008, 6:18 PM

the carb spacer does two or three other things, - Pippin on Sep 17, 2008, 8:50 PM

Info please, Cap Girdle View Thread - dedom on Sep 17, 2008, 7:58 AM

I got the answers and info I was looking for n/m - dedom on Sep 18, 2008, 11:28 AM

Drilling heads for 14 bolt pattern View Thread - steve pearson on Sep 17, 2008, 6:18 AM

The outer two top holes should not be too much of an issue but.... - hawkrod on Sep 17, 2008, 7:26 AM

Just as you say! - Dan W on Sep 17, 2008, 7:30 AM

He does not have any bottoming holes to tap - hawkrod on Sep 17, 2008, 7:38 AM

Uh Hawkrod, I think he's referring to the type of tap needed to add the other holes....... - Rod C on Sep 17, 2008, 10:56 AM

Yes, hence he will not need a bottoming tap - hawkrod on Sep 17, 2008, 12:07 PM

but they don't - Tom P on Sep 17, 2008, 12:40 PM

DOH! The end ones, I forgot! Sorry. N/M - hawkrod on Sep 17, 2008, 5:44 PM

Here are the blueprints. - Dave Shoe on Sep 18, 2008, 12:04 PM

OT: Ford wishes GM a Happy 100 Birthday View Thread - 427Kevin on Sep 17, 2008, 6:04 AM

Good sign that we Americans are sticking together - Brian on Sep 17, 2008, 8:41 AM

RAS/Precision Oil Pump Rockers - Jay View Thread - Ross on Sep 17, 2008, 4:07 AM

RAS rockers - RWJ on Sep 17, 2008, 4:11 AM

Missed that one, thanks n/m - Ross on Sep 17, 2008, 4:24 AM

I spoke with Doug last week - Jay Brown on Sep 17, 2008, 5:32 AM

I hope they work with you, this race is TOO high a profile for - Pippin on Sep 17, 2008, 6:27 AM

They've offered to upgrade the rockers at no charge - Jay Brown on Sep 17, 2008, 6:41 AM

Thumbs Up. I hope they get to the bottom of it - Bill Ballinger on Sep 18, 2008, 10:08 AM

Mega Ford Weekend FE shoot out View Thread - Doug on Sep 16, 2008, 9:34 PM

Thank You for the support... - Mark Pruitt on Sep 16, 2008, 9:41 PM

FE shootout - Tom P on Sep 16, 2008, 10:56 PM

Re: Mega Ford Weekend FE shoot out - Rory McNeil on Sep 16, 2008, 10:32 PM

Thank You! - Jim on Sep 17, 2008, 6:48 AM

Thank you - Gord Bradley on Sep 17, 2008, 7:04 AM

Next year - Doug on Sep 17, 2008, 10:09 PM

Thank you! - XR7 on Sep 17, 2008, 12:24 PM

Re: Thank you! - gary o on Sep 17, 2008, 4:27 PM

What Jim and the others said.... - DaleP on Sep 17, 2008, 8:43 PM

kudos - gary o on Sep 17, 2008, 11:30 PM

Congratulations Guys - Anonymous on Sep 19, 2008, 9:22 PM

Clutch assist spring installation tip View Thread - Terry on Sep 16, 2008, 8:41 PM

Re: Clutch assist spring installation tip - donwight on Sep 16, 2008, 9:35 PM

Re: Clutch assist spring installation tip - Terry on Sep 16, 2008, 10:22 PM

Re: Clutch assist spring installation tip - Richard on Sep 16, 2008, 11:23 PM

Or hook one end of the spring to the front axle of a floor jack... - John Bednorz on Sep 17, 2008, 1:17 PM

Thanks, Terry! Good tip... - Marty Haynes on Sep 18, 2008, 3:26 PM

Plenty of carbon (cont.) View Thread - Randy on Sep 16, 2008, 7:59 PM

Choke opening fully? - Ross on Sep 16, 2008, 8:01 PM

Re: Choke opening fully? - Randy on Sep 16, 2008, 8:09 PM

One method I use........................ - RonW on Sep 16, 2008, 8:12 PM

'Drizzle' is a better word than 'run' water when using water/steam cleaning method. Many.. - Rod C on Sep 17, 2008, 4:31 AM

Re: Plenty of carbon (cont.) - donwight on Sep 16, 2008, 8:42 PM

Re: Plenty of carbon (cont.) - Randy on Sep 16, 2008, 8:48 PM

Re: Plenty of carbon (cont.) - donwight on Sep 16, 2008, 9:20 PM

sounds like a blown - e. philpott on Sep 16, 2008, 9:31 PM

Re: sounds like a blown - Randy on Sep 16, 2008, 9:51 PM

Not a valid test...it *DOES* sound like the power valve... - Dr. Mabuse on Sep 17, 2008, 5:14 PM

black smoke - fordsel on Sep 17, 2008, 4:41 AM

The one thing I haven't done ... - Anonymous on Sep 17, 2008, 6:08 AM

Mix - Falcon67 on Sep 17, 2008, 9:05 AM

4100's - Dsrtfox on Sep 17, 2008, 2:57 PM

If someone put a Holley base gasket under it - Bill Ballinger on Sep 17, 2008, 5:34 PM

Re: If someone put a Holley base gasket under it - Randy on Sep 17, 2008, 6:39 PM

Re: If someone put a Holley base gasket under it - donwight on Sep 17, 2008, 9:40 PM

If I could just find a good FE mechanic - Randy on Sep 19, 2008, 9:14 PM

Recommend you get another set of trained eyes on it - Ross on Sep 18, 2008, 2:55 AM

1963 Galaxie Front End. View Thread - Joe on Sep 16, 2008, 6:33 PM

Re: 1963 Galaxie Front End. - Chuck J. on Sep 16, 2008, 10:07 PM

Welcome to my world Joe... - BattlestarGalactic on Sep 17, 2008, 8:31 AM

I will look tonight but I believe,,,,,,, - garry on Sep 17, 2008, 9:37 AM

Re/ 63 anti harsh,,,,,, - garry on Sep 17, 2008, 2:17 PM

MOOG had a solution in the 60's. Fairly simple but effective. - Inthegarge on Sep 17, 2008, 4:51 PM

Interesting version... - BattlestarGalactic on Sep 18, 2008, 5:51 AM

Larry, I have been using these since the 60's with no - Inthegarge on Sep 18, 2008, 8:56 AM

Holley experts....need some insight please View Thread - Jim Whitton on Sep 16, 2008, 5:29 PM

Sure its not a small exhaust leak? - Ross on Sep 16, 2008, 5:38 PM

Re: Sure its not a small exhaust leak? - Mike Lay on Sep 16, 2008, 5:47 PM

Now that you mention it..... - Jim Whitton on Sep 16, 2008, 6:13 PM

Re: Now that you mention it..... - e. philpott on Sep 16, 2008, 6:19 PM

Popping - Ross on Sep 16, 2008, 7:04 PM

popping - jcrowe on Sep 17, 2008, 8:42 AM

9 second Deisel Mustang...It's real! View Thread - Earl on Sep 16, 2008, 2:52 PM

I can belive it YouTube..... - robert on Sep 16, 2008, 4:35 PM

Diesel - Falcon67 on Sep 17, 2008, 9:27 AM

Diesel - Tom P on Sep 17, 2008, 8:10 PM

Its cool but... - Dave Walters on Sep 16, 2008, 4:39 PM

I saw it run at Steele AL.. - Ron Smith on Sep 16, 2008, 6:47 PM

Diesel cars - steve meyer on Sep 17, 2008, 6:01 PM

I think the problem stems from... - Dave Walters on Sep 18, 2008, 6:20 AM

Diesel - Falcon67 on Sep 18, 2008, 8:32 AM

The ECO-netic diesel in Europe won't pass our EPA emissions standards. Also Ford has...... - Rod C on Sep 18, 2008, 9:52 AM

Progress video on FE Bob's 62 Gal. View Thread - Craig Mitchell on Sep 16, 2008, 2:44 PM

Fantastic - 427Kevin on Sep 16, 2008, 3:02 PM

Kevin, I'm not sure if I interpreted your statement correctly, but..... - RonW on Sep 16, 2008, 4:51 PM

re: Panama - 427Kevin on Sep 16, 2008, 5:57 PM

Kevin, are you aware - john vermeersch on Sep 16, 2008, 6:18 PM

Hi John - 427Kevin on Sep 16, 2008, 6:50 PM

You mean Ubly's still open? Last time I was there was the summer of 62, uncle had...... - Rod C on Sep 17, 2008, 4:02 AM

I am sure someone will video it........................ - RonW on Sep 16, 2008, 6:22 PM

Yep, I'm lurking! - Brad on Sep 18, 2008, 5:13 PM

Sounds like a big old Pratt Whitney radial when it idles ! N/M - hollis franks on Sep 16, 2008, 3:14 PM

So Cool - Wreckless Warren on Sep 16, 2008, 3:36 PM

Sounds so familiar for some reason LOL - MeanGene on Sep 16, 2008, 3:58 PM

attn: MeanGene - 427Kevin on Sep 16, 2008, 6:00 PM

Superb. Sounds awesome. I love ........ - ford-boy on Sep 16, 2008, 6:34 PM

Thats a nice 62 you got there ford-boy....................... - RonW on Sep 16, 2008, 6:49 PM

The '62 Thread - 427Kevin on Sep 16, 2008, 6:53 PM

Hi Ron. I bought this car from FL (Palm Bay) and .... - ford-boy on Sep 16, 2008, 7:05 PM

Ok, now I remember you asking.................. - RonW on Sep 16, 2008, 8:04 PM

Mallory Fe Distributor-Marine Version? View Thread - Don Hall on Sep 16, 2008, 2:40 PM

Marine Distributor - Jon on Sep 16, 2008, 5:17 PM

easy - Tom P on Sep 16, 2008, 8:07 PM

The original tachs, available from Mallory in the.... - KenS on Sep 16, 2008, 10:26 PM

Side Post: Man that is and RAM INTAKE for Jay Brown to test! n/m - Pippin on Sep 17, 2008, 8:55 PM

Work'n on same thing.. - BattlestarGalactic on Sep 17, 2008, 9:55 AM

Check the drive gear for tach,,,,, - garry on Sep 17, 2008, 2:31 PM

O/T - C6 Rebuild Question View Thread - Nathan on Sep 16, 2008, 2:34 PM

For low key help and advice - bbr60 on Sep 16, 2008, 2:41 PM

Also try - DragBoss on Sep 16, 2008, 4:21 PM

What kind of service? - RJP on Sep 16, 2008, 5:18 PM

Basic Street-Strip use... - Nathan on Sep 17, 2008, 7:16 AM

a stock C6 will handle that - RJP on Sep 17, 2008, 10:03 AM

Thanks - Good to get more confirmation... - Nathan on Sep 17, 2008, 10:47 AM

I've never run 'em - RJP on Sep 17, 2008, 12:54 PM

c-6 - fordsel on Sep 16, 2008, 5:44 PM

Good stuff - TY N/M - Nathan on Sep 17, 2008, 7:17 AM

you can do it - e. philpott on Sep 16, 2008, 6:27 PM

Thanks much.... - Nathan on Sep 17, 2008, 7:18 AM

Soft parts - DragBoss on Sep 17, 2008, 1:05 PM

Randy Payne "Mr Big Stuff" in hospital with heart attack and other serious health issues View Thread - Dennis on Sep 16, 2008, 1:42 PM

Re: Randy Payne "Mr Big Stuff" in hospital with heart attack and other serious health issu - Falconred on Sep 16, 2008, 2:32 PM

Get Well Soon! - 427Kevin on Sep 16, 2008, 3:08 PM

Very sorry to hear that.......................... - RonW on Sep 16, 2008, 4:55 PM

Block Numbers ? View Thread - Bob P. on Sep 16, 2008, 1:02 PM

December 1st 1967 - Barry Byer on Sep 16, 2008, 1:31 PM

Please check the "7" closer, I've been told that the Ford/UAW strike of 67 went into..... - Rod C on Sep 19, 2008, 5:33 AM

watch the rockers go ticky ticky, 390 covers off - found You Tube Video View Thread - Pippin on Sep 16, 2008, 1:02 PM

Too Bad He Forgot To Put Oil In It - Wreckless Warren on Sep 16, 2008, 1:29 PM

Glad to see that they followed the proper cam break in proceedure! - Dave Walters on Sep 16, 2008, 2:03 PM

Checkout the upper radiator hose... - Doug Bender on Sep 16, 2008, 2:05 PM

In Kazakstan... - Jim L on Sep 16, 2008, 6:40 PM

67 mustang frame mesurments View Thread - Scott on Sep 16, 2008, 12:56 PM

Frame Dimensions - Irv on Sep 16, 2008, 2:09 PM

Re: 67 mustang frame mesurments - John on Sep 16, 2008, 7:07 PM

Got me wondering, so I went and checked mine.. - DaleP on Sep 16, 2008, 10:02 PM

Re: 67 mustang frame mesurments - Rusty Gillis on Sep 17, 2008, 5:32 AM

Thread hijack - Irv on Sep 17, 2008, 6:04 PM

Thanks for all the help. - Scott on Sep 17, 2008, 8:10 AM

Re: Thanks for all the help. - John on Sep 17, 2008, 6:30 PM

The Year of the Cammer: Bill Coons Prototype Distributor Cammer Front Cover View Thread - Roger Gordon on Sep 16, 2008, 11:09 AM

Re invent the wheel? - RWJ on Sep 17, 2008, 3:24 AM

Front Cover Distributor Drive: Hey Wayne - Roger Gordon on Sep 17, 2008, 8:25 AM

Cover - RWJ on Sep 18, 2008, 4:20 AM

Nice combo - wizbam on Sep 18, 2008, 2:04 PM

O/T: We had the discussion here about watching for Snakes Spiders etc in cars View Thread - qikBBstang on Sep 16, 2008, 10:36 AM

Living in Florida Id think y'all'd be used to it - kelly on Sep 16, 2008, 10:44 AM

Same in Texas - Anonymous on Sep 16, 2008, 11:31 AM

Re: Same in Texas - Tom C on Sep 16, 2008, 12:06 PM

North Dakota winters are not so bad afterall... I hate snakes - blizz on Sep 16, 2008, 12:29 PM

Oh no!!! The secret is out. - David F. on Sep 16, 2008, 1:31 PM

Damn blizz, you making me want to move...................... - RonW on Sep 16, 2008, 5:03 PM

Re; North Dakota - John Howard on Sep 17, 2008, 2:19 PM

N.D. - steve meyer on Sep 17, 2008, 6:50 PM

LOL Critters - MeanGene on Sep 16, 2008, 2:13 PM

I guess I'm pretty lucky this year... - Mike on Sep 16, 2008, 10:56 PM

I've got a plan... - Tom P on Sep 16, 2008, 11:03 PM

LMAO - Mike on Sep 16, 2008, 11:51 PM

Guam - RWJ on Sep 17, 2008, 3:34 AM

LOL--- yikes! - Tom P on Sep 17, 2008, 10:53 AM

Ouch - Bill Ballinger on Sep 17, 2008, 5:20 PM

Re: Ouch - Tom C on Sep 17, 2008, 8:47 PM

Hard to believe in this day and age but my Gals sis is a nurse in a Gen Prac. in Lake City - qikBBstang on Sep 20, 2008, 3:02 AM

Push rod length View Thread - gord on Sep 16, 2008, 8:18 AM

Gord, the length needed depends.... - KenS on Sep 16, 2008, 9:38 AM

Questions on Kieth Craft Heads: View Thread - qikBBstang on Sep 16, 2008, 7:48 AM

I`m also interested what is difference between stage 2 and stage 3? n/m - karjalai on Sep 16, 2008, 12:20 PM

also interested - Andreas Johansen on Sep 16, 2008, 1:04 PM

Heads, differences - Keith Craft on Sep 16, 2008, 11:06 PM

Re: Heads, differences - George Vega on Sep 17, 2008, 4:07 AM

wow i am impressed - Kyle on Sep 17, 2008, 8:19 AM

Heads - Keith Craft on Sep 17, 2008, 10:17 PM

O/T....Galaxie front suspension question View Thread - BattlestarGalactic on Sep 16, 2008, 7:34 AM

Way cool car!!!.....was the camber and caster checked also ?? - winr1 on Sep 16, 2008, 9:47 AM

Yes... - BattlestarGalactic on Sep 16, 2008, 9:58 AM

Alignment ain't magic..... - Beoweolf on Sep 16, 2008, 10:19 AM

I'm all for doing it myself............... - BattlestarGalactic on Sep 16, 2008, 10:57 AM

Larry - Do you have a toe-in stabilizer bar? - William Conley on Sep 16, 2008, 10:22 AM

Thanks Bill... - BattlestarGalactic on Sep 16, 2008, 10:52 AM

Stabilizer Bar works! - Trevor on Sep 16, 2008, 12:09 PM

Rotating pin... - BattlestarGalactic on Sep 16, 2008, 12:40 PM

caster blaster - Tom P on Sep 16, 2008, 12:53 PM

No strut rod on '64 - BattlestarGalactic on Sep 16, 2008, 1:08 PM

Offset Shaft - Trevor on Sep 16, 2008, 12:53 PM

Thanks for the link... - BattlestarGalactic on Sep 16, 2008, 1:19 PM

Stabilizer Bracket..pic - blizz on Sep 16, 2008, 12:59 PM

Install? - BattlestarGalactic on Sep 16, 2008, 1:06 PM

I tweaked it alright-with a couple of 4' prybars,and 3-4 beers. nm - blizz on Sep 16, 2008, 1:10 PM

Bar install - Trevor on Sep 16, 2008, 3:40 PM

Larry, MOOG made a support to keep the eccentric - Inthegarge on Sep 16, 2008, 3:27 PM

this only applied to 63 and 64's correct?? - robert on Sep 16, 2008, 9:53 PM

Ya.... - BattlestarGalactic on Sep 17, 2008, 5:51 AM

Was not hard to install - Chuck J. on Sep 18, 2008, 8:54 AM

anybody thought about tierod angle vs. steering arm?? - steve bava on Sep 19, 2008, 3:42 PM

O/T Steering Rack Info View Thread - Paul on Sep 16, 2008, 6:00 AM

360-390 View Thread - Todd Wimberly on Sep 16, 2008, 5:59 AM

Re: 360-390 - Pete on Sep 16, 2008, 6:20 AM

SOHC FAIRLANE View Thread - XBOLT on Sep 16, 2008, 4:45 AM

Pretty sweet, here's another............ - $Bill on Sep 16, 2008, 4:57 AM

Not to nit pick BUT...... - Cliff Harmon on Sep 16, 2008, 9:37 AM

SOHC - RWJ on Sep 17, 2008, 3:40 AM

Jay, about your last two DW participants........ View Thread - Pete S. on Sep 16, 2008, 4:00 AM

LOL! Well... - Jay Brown on Sep 16, 2008, 5:32 AM

<< Prev

28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!