| hmmmSeptember 7 2008 at 12:46 PM | Bill (Login billinstuart) |
Response to RPMs didn't move much |
| The distributor turns at 1/2 the speed of the engine..1 degree of distributor is 2 degrees engine. That looks like what I would expect. It should idle faster with the timing advanced. Double check your firing order..pull each plug wire from the cap one at a time to see if you have a dead hole. If you pull the wire from the cap it wont shock you.
Tell me again the history of this motor..has it ever run up to normal rpms??
Bill |
| Responses |
|
|