Torino / Cyclone Technical Forum (Page 22 )

Torino / Cyclone Technical Forum This is a technical discussion platform for the Ford / Mercury midsize line of cars, the Torino and the Cyclone. In this forum you are able to put uploaded images in your posts, and use signatures if you like. Images are kept in posts for 1 week then the system removes them. This is not a club, there is no where to create photo albums. This is for the exchange of information on the cars we love, Torinos and Cyclones. Owner / Moderator; Mike the Cobra. Email mike-the-cobra@torinocobra.com Moderators; Phil (70brougham) and ADave. Absolutely NO POSTS are allowed relating to Politics, Religion, Alternative Lifestyles, or any other "inflamatory" subject (you know what they are). These kind of posts will be deleted IMMEDIATELY! I have spent too many years building this forum into the best Torino Technical forum on the internet, and will not allow people to be driven away. Let's try to keep it to cars for the most part!!!

Network54 Message: New search for free forums is available. Please test and try it here!

Not logged in | Login | Create Account

Search Post a new message!

starting problem help needed please View Entire Thread - Rob K on Nov 29, 2006, 6:08 PM

ground - johnfreehling on Nov 29, 2006, 9:22 PM

Rob, I have had a similar problem... - Greg M. on Nov 29, 2006, 11:02 PM

Greg, sounds like neutral safety switch - phil on Nov 29, 2006, 11:07 PM

I know I am exposing my ignorance... - Greg M. on Nov 30, 2006, 11:26 AM

The wiring harness haas a connector for a NSS - Greg Pettit on Nov 30, 2006, 11:38 AM

OK...hold it... - Greg M. on Nov 30, 2006, 2:47 PM

Inside the car, under the steering column - Greg Pettit on Nov 30, 2006, 2:59 PM

But I do have lights, horn and dash functions... - Greg M. on Nov 30, 2006, 3:17 PM

Got the posts mixed up, sorry - Greg Pettit on Nov 30, 2006, 4:58 PM

I can describe it - Phil on Nov 30, 2006, 3:27 PM

Good point, Phil - Greg Pettit on Nov 30, 2006, 4:59 PM

Starting problem - Lou Whitfield on Nov 30, 2006, 12:17 AM

Battery is good - Rob K on Nov 30, 2006, 10:47 PM

Reg must be grounded - Greg Pettit on Nov 30, 2006, 10:53 PM

Re: Battery is good - giz on Nov 30, 2006, 10:54 PM

Greg Pettit's advice - Lou Whitfield on Nov 30, 2006, 11:12 PM

Re: Greg Pettit's advice - Jimmy B on Dec 1, 2006, 12:00 AM

I am almost certain the solenoid is wired correctly... - Greg M. on Dec 1, 2006, 7:49 AM

Neutral Safety Switch - Lou Whitfield on Nov 30, 2006, 11:54 PM

Re: Neutral Safety Switch - Jimmy B on Dec 1, 2006, 10:17 AM

"One post makes it pull in the other supplies full 12V to the ign coil only when cranking. - Phil on Dec 1, 2006, 10:21 AM

S= start, I= ignition n/m - Greg Pettit on Dec 1, 2006, 11:13 AM

So "S" = - Phil on Dec 1, 2006, 11:14 AM

Negative - Greg Pettit on Dec 1, 2006, 8:36 PM

lots of good advice - johnfreehling on Dec 1, 2006, 2:42 PM

Fixing truck now - Phil on Dec 1, 2006, 2:59 PM

Fusible link - Rob K on Dec 7, 2006, 6:25 PM

Go to auozone, or any auto parts store - Greg Pettit on Dec 7, 2006, 6:34 PM

thanks Greg - Rob K on Dec 8, 2006, 10:10 PM

replaced fusible link - Rob K on Dec 11, 2006, 7:24 PM

ebay great 71 Montego parts car, great price so far View Entire Thread - Tom in Miami on Dec 7, 2006, 9:19 PM

heres' the link - Tom in Miami on Dec 7, 2006, 9:20 PM

tom email me - jack kuepper on Dec 9, 2006, 6:24 PM

Jack, did you leave off part of your email address? - Tom in Miami on Dec 9, 2006, 9:22 PM

had 2 last year couldn't give them away - brian on Dec 10, 2006, 2:42 AM

my email is correct..... - jack kuepper on Dec 10, 2006, 10:05 AM

yep we did... - Brian on Dec 10, 2006, 2:03 PM

ah yes - jack kuepper on Dec 10, 2006, 8:22 PM

Jack if you head to Chicago...... - ADave on Dec 10, 2006, 11:23 PM

i will do that... - jack kuepper on Dec 11, 2006, 4:50 PM

hood pins, yes or no? View Entire Thread - john on Dec 9, 2006, 5:14 PM

no - Phil on Dec 9, 2006, 5:21 PM

Another no - Oldbutspry on Dec 9, 2006, 5:29 PM

NO..Hoods deserve some respect! n/m - TODD on Dec 9, 2006, 8:50 PM

I'm a little confused - FElony on Dec 9, 2006, 9:19 PM

me too! - john sollner on Dec 9, 2006, 9:55 PM

I'll email you - FElony on Dec 10, 2006, 1:00 AM

60 miles away - john sollner on Dec 9, 2006, 10:49 PM

The Real Deal - FElony on Dec 10, 2006, 12:58 AM

I am a yes man. Here is why. - Michael Bryce Winnick on Dec 10, 2006, 8:44 AM

auto krafters? - john sollner on Dec 10, 2006, 11:46 AM

Re: hood pins, yes or no? - Scott Koch on Dec 10, 2006, 10:46 AM

if you do - huffhuff on Dec 11, 2006, 8:33 AM

roger - john sollner on Dec 11, 2006, 3:28 PM

I think I have a game plan View Entire Thread - Brad on Dec 4, 2006, 3:04 PM

there is a guy over on TurboFord.com forum - Phil on Dec 4, 2006, 3:24 PM

I picked up the SCJ Intake along with the exhaust manifolds. n/m - Brad on Dec 4, 2006, 3:49 PM

I'm showing my ignorance here, - Brad on Dec 4, 2006, 4:17 PM

Re: I'm showing my ignorance here, - Rick Manley on Dec 4, 2006, 4:43 PM

2 1/2 vs. 3 inch - Joel on Dec 4, 2006, 3:55 PM

good idea, - Brad on Dec 4, 2006, 4:02 PM

Wouldn't the SCJ intake and exhaust manifolds eliminate me from the pure stock drags? n/m - Brad on Dec 4, 2006, 4:04 PM

Not at all - Joel on Dec 4, 2006, 4:12 PM

PURE STOCK DRAGS - rtuttle on Dec 4, 2006, 5:54 PM

my 4300 carb is long gone, anyone have a spare? n/m - Brad on Dec 4, 2006, 5:59 PM

4300 - rtuttle on Dec 4, 2006, 7:25 PM

Recurving Dizzys - giz on Dec 4, 2006, 7:33 PM

Re: my 4300 carb is long gone, anyone have a spare? n/m - Matt in HBG on Dec 4, 2006, 8:37 PM

I can't pass that up!!! You are da man!! - Brad on Dec 4, 2006, 10:31 PM

When I get on the dyno in Manheim again, I'll have to call you to come down. fun fun! n/m - Brad on Dec 4, 2006, 10:33 PM

Re: When I get on the dyno in Manheim again, I'll have to call you to come down. fun fun! n/m - Matt in HBG on Dec 5, 2006, 2:36 AM

Article on recurving a distributor - JohnP on Dec 5, 2006, 9:28 AM

LOL...180 out.... not likely - Greg Pettit on Dec 5, 2006, 9:53 AM

I stand corrected - JohnP on Dec 5, 2006, 11:16 AM

Yep, 180 out...here's pics - Gerard in San Diego on Dec 5, 2006, 11:38 AM

Ok, I see how this is happening now - Greg Pettit on Dec 5, 2006, 11:47 AM

4300 CARB - rtuttle on Dec 5, 2006, 7:23 PM

doing a 180 - Mark on Dec 5, 2006, 9:04 PM

71 shop manual - Jimmy B on Dec 5, 2006, 9:52 PM

Glenn Z can do a recurve for you - CharlieH on Dec 6, 2006, 3:55 PM

shameless plug, thanks charlieH - glennz on Dec 6, 2006, 11:44 PM

10 degrees mechanical? - gary o on Dec 7, 2006, 12:55 AM

are you running vaccum advance ( long ) - glennz on Dec 7, 2006, 5:47 AM

Hmmm - giz on Dec 7, 2006, 6:22 PM

on one of our cleveland build in a 50 ford pick up - glennz on Dec 8, 2006, 8:45 AM

Re: are you running vaccum advance ( long ) - gary o on Dec 7, 2006, 9:34 PM

Another Question - giz on Dec 7, 2006, 10:40 PM

Re: Another Question - gary o on Dec 7, 2006, 10:54 PM

That is essentially correct provided the correct factory plastic bumper... - Scotty J. AKA "The Mad Porter" on Dec 7, 2006, 11:40 PM

Re: That is essentially correct provided the correct factory plastic bumper... - gary o on Dec 11, 2006, 2:40 PM

o/t digital camera question View Entire Thread - gary o on Dec 6, 2006, 2:00 PM

I have a Kodak Easysahre c340... - Cory Johnson on Dec 6, 2006, 2:11 PM

camrea that I have and love - chris windham on Dec 6, 2006, 8:22 PM

Mines a Sony 3.2 megapixel - Phil on Dec 6, 2006, 8:35 PM

good tips - gary o on Dec 6, 2006, 9:28 PM

If shooting cars more than birds (or up skirts) - Phil on Dec 6, 2006, 9:55 PM

Re: If shooting cars more than birds (or up skirts) - gary o on Dec 6, 2006, 9:59 PM

Re: If shooting cars more than birds (or up skirts) - Rick Manley on Dec 6, 2006, 11:03 PM

Same thing but with VIDEO CAMERA'S - mcford on Dec 6, 2006, 10:35 PM

Horsepower Heaven - Ken Blades on Dec 6, 2006, 10:44 PM

camera - giz on Dec 7, 2006, 6:33 PM

Sony - CJJTulsa on Dec 7, 2006, 6:58 PM

some great testomonials - gary o on Dec 7, 2006, 10:25 PM

All you will ever need to know... - Pete Schwind on Dec 7, 2006, 10:39 PM

Canon is best - giz on Dec 7, 2006, 10:56 PM

One thing to help with those cheesy AA batteries - chris windham on Dec 8, 2006, 10:57 AM

never had a problem - mcford on Dec 10, 2006, 8:21 AM

will look at that one - gary o on Dec 7, 2006, 10:56 PM

Another thing to consider when buying a camera.... - giz on Dec 9, 2006, 10:38 PM

Re: Another thing to consider when buying a camera.... - mcford on Dec 10, 2006, 8:22 AM

Speaking of batteries... - Kevin on Dec 10, 2006, 12:11 PM

nice marks! - mcford on Dec 10, 2006, 12:16 PM

Loaner tires!!! - Kevin on Dec 10, 2006, 12:35 PM

How? - giz on Dec 10, 2006, 6:24 PM

Cool effect huh??? - Kevin on Dec 10, 2006, 6:33 PM

giz, use photobucket - mcford on Dec 10, 2006, 7:16 PM

ok, video cameras. tape or hard drive? - mcford on Dec 10, 2006, 8:45 PM

thanks for all the input guys - gary o on Dec 11, 2006, 12:46 PM

to huffhuff View Entire Thread - steve on Dec 11, 2006, 7:14 AM

fur shure - huffhuff on Dec 11, 2006, 8:29 AM

Big Block Coil Springs View Entire Thread - Joel on Dec 10, 2006, 11:23 AM

nope - mcford on Dec 10, 2006, 12:21 PM

springs - steve on Dec 10, 2006, 8:51 PM

Springs - Joel on Dec 10, 2006, 10:31 PM

Springs - Steve on Dec 11, 2006, 8:26 AM

SCJ Carb? View Entire Thread - Ed Raden on Dec 9, 2006, 1:28 PM

I see them on Ebay for $500 and up. n/m - Chris J. on Dec 9, 2006, 1:41 PM

The carb you are looking for is a... - Greg M. on Dec 9, 2006, 3:12 PM

base PCV - Joel on Dec 10, 2006, 9:53 AM

base IS different - mcford on Dec 10, 2006, 10:44 AM

what r u picking up? - john sollner on Dec 9, 2006, 5:24 PM

I'm picking up a complete car - Ed Raden aka Pontiac Ed on Dec 10, 2006, 11:44 PM

Wait a minute...PONTIAC ED!?!?! - Greg M. on Dec 11, 2006, 7:21 AM

Motor Trend Car of the Year View Entire Thread - Barry on Dec 11, 2006, 12:16 AM

Ok, I'll ask... - Oldbutspry on Dec 11, 2006, 12:20 AM

Not a Shelby GT500...lol - Barry on Dec 11, 2006, 12:26 AM

anyone ever deal with this ebayer? View Entire Thread - Jay on Dec 10, 2006, 9:15 PM

dont know, but! - mcford on Dec 10, 2006, 10:06 PM

yeah, I tend to be real careful about buying sight unseen.. - Jay on Dec 10, 2006, 11:33 PM

Ask him... - Oldbutspry on Dec 11, 2006, 12:18 AM

Hey A-Dave View Entire Thread - Tenn-Hillbilly on Feb 14, 2005, 1:16 AM

Its not my family,Its My friend Marks family. - ADave on Feb 14, 2005, 10:06 PM

I think you are Close - Tennessee Hillbilly on Feb 14, 2005, 10:22 PM

I think I met her before. - ADave on Feb 14, 2005, 10:52 PM

Know this Guy? - Tennessee Hillbilly on Feb 16, 2005, 7:44 AM

Anything ever happen with this Bill Draper? - Great Wife on Dec 10, 2006, 11:38 PM

Will; 71-73 Mustang 9" housing fit 70-71 Torino???? View Entire Thread - E.J. on Nov 24, 2006, 4:58 PM

9" Center Section - Dave on Nov 24, 2006, 7:02 PM

HOUSING with axles.......not Center Section, n/m - E.J. on Nov 24, 2006, 7:24 PM

Not sure but - Matt Zimmerman on Nov 24, 2006, 7:43 PM

Cool.... - E.J. on Nov 24, 2006, 7:56 PM

Matt, purch center measurement????? - E.J. on Nov 30, 2006, 12:03 PM

I will re check it - Matt Z on Nov 30, 2006, 12:36 PM

e-mail sent, n/m - E.J. on Nov 30, 2006, 1:01 PM

MATT Z, I sent a e-mail with Pics of the rear end. - E.J. on Dec 10, 2006, 12:18 PM

axle - johnfreehling on Nov 24, 2006, 8:36 PM

I believe - BC on Nov 24, 2006, 9:25 PM

your probably right - johnfreehling on Nov 25, 2006, 7:55 PM

Re: I believe - Sean on Dec 10, 2006, 9:30 PM

I have some axles.... - Derek on Nov 25, 2006, 10:20 AM

John Freehling - ADave on Dec 10, 2006, 12:47 PM

Here's a challenge for you Photoshop pros..... View Entire Thread - Barry on Dec 9, 2006, 7:31 PM

Pettit's 200MPH wagon project was going to be a 2 door - Phil on Dec 9, 2006, 7:45 PM

Re: Here's a challenge for you Photoshop pros..... - mcford on Dec 9, 2006, 9:37 PM

Rancheragon - Barry on Dec 9, 2006, 9:45 PM

2dr doors all the same - mcford on Dec 10, 2006, 8:18 AM

Ranchero doors... - KenW on Dec 10, 2006, 6:55 PM

OK now, Don't Make Fun!!! - Barry on Dec 10, 2006, 12:40 AM

Custom Wagons - giz on Dec 10, 2006, 7:19 PM

Let me try this photobucket thing... - giz on Dec 10, 2006, 9:24 PM

It works! Thanks, McFord - giz on Dec 10, 2006, 9:30 PM

Went and saw a torino cobra today-may be a good parts car for anyone interested.. View Entire Thread - Jay on Dec 10, 2006, 9:02 PM

Look what they did to my Pinto! ;-) View Entire Thread - Gerard in San Diego on Dec 9, 2006, 12:39 AM

Re: Look what they did to my Pinto! ;-) - Rick Manley on Dec 9, 2006, 10:43 PM

It's probably up on horsepower now too! LOL N/M - hawkrod on Dec 9, 2006, 11:18 PM

Haulin' Hay - Ken Blades on Dec 10, 2006, 1:38 PM

I should buy that... - KenW on Dec 10, 2006, 1:43 PM

Ken..Ken..Ken....... - Kevin on Dec 10, 2006, 6:47 PM

Thanks Kevin... - KenW on Dec 10, 2006, 6:58 PM

Christmas came early...... View Entire Thread - Kevin on Dec 10, 2006, 1:03 PM

Nice Kevin!!!... - KenW on Dec 10, 2006, 1:38 PM

Very nice! - giz on Dec 10, 2006, 6:08 PM

Idea View Entire Thread - giz on Dec 9, 2006, 9:52 PM

Like this? - Mike the Cobra on Dec 10, 2006, 9:04 AM

Re: Like this? - ADave on Dec 10, 2006, 12:50 PM

Get them made... - KenW on Dec 10, 2006, 1:44 PM

Thanks Mike; that should work - giz on Dec 10, 2006, 6:05 PM

OT(?)-Did you see the house for sale in the torino classifieds?? View Entire Thread - Jay on Dec 10, 2006, 4:47 PM

Heck, I didn't know the CIA had a realestate division - Phil on Dec 10, 2006, 5:00 PM

For Sale: 1973 GTS Fastback, southern car, very little rust. View Entire Thread - E.J. on Dec 3, 2006, 10:30 AM

Mc Ford - Bob on Dec 3, 2006, 10:36 AM

too many watchers and no bidders.. - mcford on Dec 3, 2006, 10:55 AM

Thats a good deal!! - TorinoStyle2 on Dec 3, 2006, 2:51 PM

I thought I was sick of green cars - Phil on Dec 3, 2006, 3:21 PM

We talked about that before.... - E.J. on Dec 3, 2006, 4:16 PM

NEW PICTURES of the GTS, about 20 of them...... - E.J. on Dec 10, 2006, 3:59 PM

'66 update View Entire Thread - Michael Winnick on Dec 10, 2006, 12:15 PM

no help BUT! - mcford on Dec 10, 2006, 12:19 PM

O/T Brand X help S-10 View Entire Thread - giz on Dec 9, 2006, 10:11 PM

resistor is common - mcford on Dec 10, 2006, 8:24 AM

its a chevy look for rust..... - jack kuepper on Dec 10, 2006, 11:58 AM

another good point, - mcford on Dec 10, 2006, 12:17 PM

2 Door Wagon Concept View Entire Thread - Bary on Dec 10, 2006, 11:45 AM

Before and after - Barry on Dec 10, 2006, 11:47 AM

works for me - jack kuepper on Dec 10, 2006, 11:56 AM

Greg M. and Chris J. - 1970 and 2006 are not so different (pics) View Entire Thread - Pete Schwind on Dec 8, 2006, 6:10 PM

Very cool, Pete. Some of them are...... - Chris J. on Dec 8, 2006, 9:26 PM

I cant get enough of Chris' Cobra... - Greg. M on Dec 8, 2006, 10:38 PM

So you dig on pics... a few more Torino shots - Pete Schwind on Dec 8, 2006, 11:49 PM

Pete, you are the man... - Greg M. on Dec 9, 2006, 7:37 AM

Work is holding me back. - Chris J. on Dec 9, 2006, 1:39 PM

You Dawg! - Greg M. on Dec 9, 2006, 3:16 PM

I bet Chris would still thrash it... - Pete Schwind on Dec 10, 2006, 12:29 AM

You're right, Pete. - Chris J. on Dec 10, 2006, 3:14 AM

how can I tell a CJ head from a DOVE head externally? View Entire Thread - jay on Dec 9, 2006, 9:31 PM

Look at the casting numbers on the heads. - TorinoStyle2 on Dec 9, 2006, 10:09 PM

can you see the casting number with the valve cover on? - Jay on Dec 9, 2006, 10:33 PM

Head ID location - Dave on Dec 9, 2006, 11:49 PM

Have a look here - SnakeOnWheels on Dec 10, 2006, 3:14 AM

72/73 Montego front bumper interchange View Entire Thread - Mike on Dec 9, 2006, 9:15 PM

major changes - brian on Dec 10, 2006, 2:39 AM

1970 Torino Cobra question View Entire Thread - Gregg R Blakely on Dec 9, 2006, 11:19 PM

Standard. n/m - Halowe on Dec 9, 2006, 11:56 PM

engine lifts View Entire Thread - reedspaint on Dec 4, 2006, 10:56 PM

some samples - Phil on Dec 4, 2006, 11:13 PM

This is what I use. - chris windham on Dec 5, 2006, 9:54 AM

That is the exact lift was dissing - Phil on Dec 5, 2006, 10:17 AM

Lifts - Jeff on Dec 6, 2006, 9:39 AM

Agreed and another useful tool-pic - Phil on Dec 6, 2006, 9:54 AM

Re: Agreed and another useful tool-pic - Jimmy B on Dec 6, 2006, 10:57 AM

Re: Agreed and another useful tool-pic - Rick Manley on Dec 6, 2006, 12:25 PM

Tranny Plug Noted... - Jeff on Dec 6, 2006, 2:57 PM

Re: Tranny Plug Noted... - Rick Manley on Dec 6, 2006, 11:26 PM

Thanks for all the help, fellers n/m - reedspaint on Dec 9, 2006, 9:54 PM

ENGINE COLOR View Entire Thread - Kevin H. on Dec 9, 2006, 6:18 PM

plasticote - mcford on Dec 9, 2006, 6:45 PM

Duplicolor 1621 works A OK too - Phil on Dec 9, 2006, 7:27 PM

Any bolt kits for Torino? View Entire Thread - Jeff P on Dec 9, 2006, 2:19 AM

go with mustang - mcford on Dec 9, 2006, 8:49 AM

Re: Any bolt kits for Torino? - Steven L on Dec 9, 2006, 7:15 PM

Anyone see this news item? View Entire Thread - Matt in HBG on Dec 8, 2006, 10:19 PM

Re: Anyone see this news item? - giz on Dec 8, 2006, 10:49 PM

Re: Anyone see this news item? - giz on Dec 8, 2006, 11:08 PM

It's the Department I'm in now that the Chinese are Serious about - walt on Dec 9, 2006, 7:52 AM

Re: It's the Department I'm in now that the Chinese are Serious about - giz on Dec 9, 2006, 10:43 AM

The Big Three - Bob on Dec 9, 2006, 1:35 PM

Ford's situation - Oldbutspry on Dec 9, 2006, 5:19 PM

73 Gran Torino Sport rear suspension? View Entire Thread - Rob on Dec 9, 2006, 12:17 PM

Re: 73 Gran Torino Sport rear suspension? - Tim Rumley on Dec 9, 2006, 3:33 PM

Re: 73 Gran Torino Sport rear suspension? - Tim Rumley on Dec 9, 2006, 3:37 PM

68/69 love, seems to be lesser here as there are so many 70-71s View Entire Thread - Phil on Dec 5, 2006, 9:25 AM

I love the 68-69 fastbacks, I'd build one in a second - Greg Pettit on Dec 5, 2006, 10:22 AM

Phil I seem to run into more 68/69 fastbacks then - Allen on Dec 5, 2006, 12:14 PM

I know one or two things - FElony on Dec 5, 2006, 12:17 PM

Here is the email I got/sent- maybe yall can help Mr. Sollner. - Phil on Dec 5, 2006, 1:24 PM

Budget - FElony on Dec 5, 2006, 3:24 PM

you said in 2 sentences what took me a page - Phil on Dec 5, 2006, 3:31 PM

I'll send you - FElony on Dec 5, 2006, 3:34 PM

lol - Phil on Dec 5, 2006, 3:35 PM

This is my "badass green one" - Jason on Dec 5, 2006, 2:30 PM

I too love the notch - Phil on Dec 5, 2006, 2:33 PM

My 69 tale... - Make mine a 69 on Dec 5, 2006, 5:57 PM

LOVE the coupes, dont care for the fastbacks..... - mcford on Dec 5, 2006, 6:57 PM

JASON, your 69 looks KICK @SS! - Erik on Dec 5, 2006, 8:55 PM

My rear tire/wheel size - Jason on Dec 5, 2006, 11:48 PM

wow, thanks - john on Dec 5, 2006, 6:26 PM

answers... - Make mine a 69 on Dec 5, 2006, 7:13 PM

Re: answers... - john on Dec 5, 2006, 8:39 PM

Get Started Here - FElony on Dec 5, 2006, 9:10 PM

Re: 68/69 love, seems to be lesser here as there are so many 70-71s - john on Dec 5, 2006, 7:03 PM

You'd be better off - FElony on Dec 5, 2006, 7:25 PM

Agreed - Oldbutspry on Dec 5, 2006, 7:31 PM

I agree - Bob on Dec 5, 2006, 7:54 PM

yah - john on Dec 5, 2006, 8:36 PM

68/69 Fan Here - Terry on Dec 6, 2006, 4:37 AM

good luck - john on Dec 6, 2006, 9:18 AM

I've owned a few 68's and 69 TORINO GT's - TODD on Dec 6, 2006, 2:27 AM

Solution: get both - Tom in Miami on Dec 6, 2006, 8:24 AM

count me in as a 68/69 fb fan - big t on Dec 6, 2006, 9:36 AM

"Opulent" is the word for that interior - Phil on Dec 6, 2006, 9:55 AM

460 mounts - Andy on Dec 7, 2006, 6:56 PM

460 Into 8/9 - FElony on Dec 8, 2006, 1:25 AM

I have a 69 fastback I'd like to sell - Rick L on Dec 6, 2006, 1:02 PM

interested in trades?? nm - Cory Johnson on Dec 6, 2006, 2:34 PM

Re: 68/69 love, seems to be lesser here as there are so many 70-71s - Tony on Dec 6, 2006, 7:49 PM

Perfect 68 - Tom in Miami on Dec 6, 2006, 10:11 PM

68 Pace Car (vert) 4 Sale in Sacramento CA - Barry on Dec 8, 2006, 8:49 PM

Spyder wheels on E-pay! View Entire Thread - Chris J. on Dec 8, 2006, 9:45 AM

Re: Spyder wheels on E-pay! - Bob on Dec 8, 2006, 5:41 PM

Miss Muffet - Lou Whitfield on Dec 8, 2006, 8:00 PM

any one in CA coming to the midwest? View Entire Thread - jack kuepper on Dec 8, 2006, 7:49 PM

Is it possible to get a new seal for around the heater core? View Entire Thread - Oldbutspry on Dec 7, 2006, 10:02 PM

The Good News - Oldbutspry on Dec 7, 2006, 10:10 PM

Had the same scenario - Chris on Dec 7, 2006, 11:33 PM

I bought a new heater core - Oldbutspry on Dec 8, 2006, 9:59 AM

In case you are paranoid... - Phil on Dec 8, 2006, 10:11 AM

I have enough problems - Oldbutspry on Dec 8, 2006, 4:47 PM

Foam - Grizz on Dec 8, 2006, 6:29 PM

Need help with moldings on a 72 View Entire Thread - Ryan Graves on Dec 7, 2006, 7:57 AM

moldings - mcford on Dec 7, 2006, 7:39 PM

72 molding help - Ryan on Dec 8, 2006, 1:36 PM

yes, but... - mcford on Dec 8, 2006, 6:17 PM

I need a wiring diagram for the charging/starting system for a View Entire Thread - Cory Johnson on Dec 8, 2006, 12:08 PM

Question! Anyone ship using Greyhound??? Want information.. View Entire Thread - Jay on Dec 8, 2006, 12:14 AM

trunk lid - Oldbutspry on Dec 8, 2006, 10:03 AM

I uesd Forward air - FORD-GUY on Dec 8, 2006, 10:52 AM

Problem is Forward Air is so limited - hawkrod on Dec 8, 2006, 10:57 AM

I use them a lot for body parts. Go to Greyhound. com - hawkrod on Dec 8, 2006, 10:55 AM

O/T but cool View Entire Thread - Greg Pettit on Dec 5, 2006, 9:29 PM

Also cool - Greg Pettit on Dec 5, 2006, 9:39 PM

Ok, last Motorhead O/T for tonight.... - Greg Pettit on Dec 5, 2006, 9:47 PM

OOPS -- One more, this one a modern video - Greg Pettit on Dec 5, 2006, 10:12 PM

Is that Lemmy talking or that thing on the side of his face? - Chris J. on Dec 5, 2006, 10:01 PM

DIO! - Matt in HBG on Dec 5, 2006, 10:21 PM

Early Maiden is tight, man! - Greg Pettit on Dec 5, 2006, 10:35 PM

Thats not early maiden - Phil on Dec 5, 2006, 10:43 PM

Schooled again - Greg Pettit on Dec 5, 2006, 10:46 PM

Re: Schooled again - CJJTulsa on Dec 6, 2006, 12:31 AM

WILL you youngins turn that dad-balme hoo-doo "Rock & Roll" music DOWN!?!? - Cory Johnson on Dec 6, 2006, 9:34 AM

One observation, one question: - Orin500XL on Dec 6, 2006, 4:00 PM

plus - Cory Johnson on Dec 6, 2006, 4:06 PM

All of those hard rock groups like . . . - Orin500XL on Dec 6, 2006, 4:05 PM

speaking of heavy metal..... - Cory Johnson on Dec 6, 2006, 6:15 PM

I did a random YouTube search one day and found this - Phil on Dec 6, 2006, 6:55 PM

Re: I did a random YouTube search one day and found this - Matt in HBG on Dec 6, 2006, 8:56 PM

Re: I did a random YouTube search one day and found this - giz on Dec 7, 2006, 9:09 PM

Hey - giz on Dec 7, 2006, 9:45 PM

yeah its totally thru a computer, but still, nice chops - Phil on Dec 8, 2006, 7:47 AM

as long as we're o/t - magmatt on Dec 8, 2006, 10:29 AM

Ever see FLCL? - Phil on Dec 8, 2006, 10:34 AM

Check out these NOS beauties..... View Entire Thread - Chris J. on Dec 8, 2006, 10:19 AM

Custom 70 Fairlane 4 Sale View Entire Thread - Anonymous on Dec 8, 2006, 1:47 AM

Looks like a good deal. - Chris J. on Dec 8, 2006, 9:12 AM

Agreed - Phil on Dec 8, 2006, 9:20 AM

While we are on the subject of drag racing pictures. View Entire Thread - Chris J. on Dec 8, 2006, 9:01 AM

1972 Ranchero or Gran Torino/Torino wanted View Entire Thread - mcford on Dec 6, 2006, 10:01 PM

Here you go, its all you!! - FORD-GUY on Dec 7, 2006, 10:18 AM

tubes - dragford on Dec 7, 2006, 10:58 AM

dragford, email me - mcford on Dec 8, 2006, 4:59 AM

Re: 1972 Ranchero or Gran Torino/Torino wanted - Bob on Dec 7, 2006, 4:08 PM

Month old ad, but might still be available... - Barry on Dec 8, 2006, 1:55 AM

Ebay = 1.5million in car parts? View Entire Thread - Phil on Dec 7, 2006, 10:17 AM

You should buy it Phil! - Oldbutspry on Dec 7, 2006, 10:26 AM

I can't even sort my parts and they are all from teh same year and make. - Phil on Dec 7, 2006, 10:30 AM

Like a kid in the candy store (over night) - FORD-GUY on Dec 7, 2006, 10:41 AM

Saw that listed somewhere once before - JohnP on Dec 7, 2006, 11:12 AM

Re: Ebay = 1.5million in car parts? - Halowe on Dec 7, 2006, 12:27 PM

Re: Ebay = 1.5million in car parts? - Rick Manley on Dec 7, 2006, 2:58 PM

he's off by a few decimal places - walt on Dec 7, 2006, 3:21 PM

Re: he's off by a few decimal places - Rick Manley on Dec 7, 2006, 3:54 PM

n/m - gary o on Dec 7, 2006, 10:37 PM

What causes batteries to leak? View Entire Thread - Pete Schwind on Dec 7, 2006, 10:21 PM

Overfilling or overcharging....or both! n/m - Greg Pettit on Dec 7, 2006, 10:26 PM

The 200 MPH road racing wagon has taken its second step View Entire Thread - Greg Pettit on Dec 7, 2006, 6:37 PM

I want!! - Ken Blades on Dec 7, 2006, 7:33 PM

I want to sit in that rear folding seat at 200mph - Phil on Dec 7, 2006, 7:42 PM

My friend wants the rear folding seat for a 70-71 wagon. - ADave on Dec 7, 2006, 8:24 PM

I'm jealous cause you have a wagon. n/m - Chris J. on Dec 7, 2006, 9:09 PM

what a blast - gary o on Dec 7, 2006, 9:51 PM

Had this up at 385 - t shirt idea View Entire Thread - Phil on Dec 6, 2006, 3:17 PM

nuther one - Phil on Dec 6, 2006, 3:39 PM

fun one - Phil on Dec 6, 2006, 3:44 PM

Very cool... - Cory Johnson on Dec 6, 2006, 4:01 PM

I do like the second one - Cory Johnson on Dec 6, 2006, 4:51 PM

I'll take two please - FORD-GUY on Dec 6, 2006, 4:37 PM

Possible white tee for us Southwesterners? - Gerard in San Diego on Dec 6, 2006, 4:44 PM

Dunno if I'll get around to it in 07 - Phil on Dec 6, 2006, 4:52 PM

Awesome designs. New career? - cyclonecom on Dec 6, 2006, 6:59 PM

Lose the stock air cleaner and add a shaker and I'm in for several! - Greg Pettit on Dec 6, 2006, 7:08 PM

I agree Greg, Phil you are the master of design !!!!!!!!!!!!!!!!!!!n/m - McGoo on Dec 6, 2006, 7:11 PM

Yeah, Phil, you should be a graphic designer or something! ;-) n/m - Gerard in San Diego on Dec 6, 2006, 7:46 PM

Greg, don't you mean a - Cory Johnson on Dec 6, 2006, 8:02 PM

I need an assembled shaker motor on a stand pic for that - Phil on Dec 6, 2006, 8:19 PM

add your personal touch,,, - gary o on Dec 6, 2006, 9:38 PM

Re: Had this up at 385 - t shirt idea - Rick Manley on Dec 7, 2006, 3:16 PM

Your Safe Rick - Chris on Dec 7, 2006, 6:32 PM

I've been looking for her - cyclonecom on Dec 7, 2006, 7:38 PM

I have one guess - Phil on Dec 7, 2006, 7:41 PM

Locker unit for Dana 60/61???????????? View Entire Thread - mat pasch on Dec 5, 2006, 3:20 AM

Dana - FElony on Dec 5, 2006, 12:15 PM

I thought traction-lok was bad for the snow - Oldbutspry on Dec 5, 2006, 3:20 PM

Re: I thought traction-lok was bad for the snow - Jimmy B on Dec 5, 2006, 10:16 PM

Re: I thought traction-lok was bad for the snow - matt on Dec 6, 2006, 9:17 PM

spool or traction lock - better gas milage??????? - Anonymous on Dec 7, 2006, 2:28 AM

Spools ARE not recommended for Daily Driver Street Use - walt on Dec 7, 2006, 5:06 AM

Re: Spools ARE not recommended for Daily Driver Street Use - matt on Dec 7, 2006, 1:03 PM

I have been in Ford's Axle/Drivliene Engineering Area for over 30 years - walt on Dec 7, 2006, 3:32 PM

your in vancouver right? - gary o on Dec 6, 2006, 9:35 PM

need to sell my 68 390 GT Torino View Entire Thread - Jeff P on Dec 5, 2006, 2:07 AM

wow... looks like a good deal bud... n/m - Make mine a 69 on Dec 5, 2006, 6:12 PM

Re: need to sell my 68 390 GT Torino - gary o on Dec 5, 2006, 8:08 PM

the color is Meadowlark Yellow - Jeff P on Dec 7, 2006, 2:21 AM

Heavy rust in strange places . . . . View Entire Thread - Orin500XL on Dec 3, 2006, 8:54 PM

rust - johnfreehling on Dec 3, 2006, 9:10 PM

Looks like fire damage from years ago. - ADave on Dec 3, 2006, 10:50 PM

No tranny tunnel is going to rust . . . - Orin500XL on Dec 4, 2006, 11:46 AM

Inside Rust - Jeff on Dec 5, 2006, 9:23 AM

Obvious signs - TODD on Dec 7, 2006, 1:55 AM

<< Prev

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Next >>