Torino / Cyclone Technical Forum (Page 21 )

Torino / Cyclone Technical Forum This is a technical discussion platform for the Ford / Mercury midsize line of cars, the Torino and the Cyclone. In this forum you are able to put uploaded images in your posts, and use signatures if you like. Images are kept in posts for 1 week then the system removes them. This is not a club, there is no where to create photo albums. This is for the exchange of information on the cars we love, Torinos and Cyclones. Owner / Moderator; Mike the Cobra. Email mike-the-cobra@torinocobra.com Moderators; Phil (70brougham) and ADave. Absolutely NO POSTS are allowed relating to Politics, Religion, Alternative Lifestyles, or any other "inflamatory" subject (you know what they are). These kind of posts will be deleted IMMEDIATELY! I have spent too many years building this forum into the best Torino Technical forum on the internet, and will not allow people to be driven away. Let's try to keep it to cars for the most part!!!

Network54 Message: New search for free forums is available. Please test and try it here!

Not logged in | Login | Create Account

Search Post a new message!

got the charging problem fixed View Entire Thread - Cory Johnson on Dec 15, 2006, 4:54 PM

HOT ROD MAG View Entire Thread - LEE on Dec 15, 2006, 2:44 PM

69 Cyclone Stripes View Entire Thread - Rick Manley on Dec 13, 2006, 4:11 PM

Idea - FElony on Dec 13, 2006, 10:03 PM

Re: Idea - Rick Manley on Dec 13, 2006, 10:58 PM

My situation - FElony on Dec 14, 2006, 12:06 AM

Re: My situation - Rick Manley on Dec 14, 2006, 8:57 AM

Re: My situation - Rick Manley on Dec 15, 2006, 1:23 PM

Need to know axle length 70 GT View Entire Thread - Dave on Dec 15, 2006, 11:48 AM

Re: Need to know axle length 70 GT - Matt in HBG on Dec 15, 2006, 12:44 PM

Here it is for you young Jedi's. - Chris J. on Dec 15, 2006, 12:59 PM

Axle length - Dave on Dec 15, 2006, 1:19 PM

Air Compressor Questions View Entire Thread - Barry on Dec 12, 2006, 1:38 PM

I have a sears 30 gallon oiless upright - Phil on Dec 12, 2006, 1:52 PM

Depends on what you need/want to do and how much you want to spend. - chris windham on Dec 12, 2006, 5:15 PM

Re: Depends on what you need/want to do and how much you want to spend. - Grizz on Dec 12, 2006, 6:31 PM

Thanks guys - Barry on Dec 13, 2006, 1:09 AM

Air - Jeff on Dec 13, 2006, 12:42 PM

Barry - Craig Naber on Dec 14, 2006, 8:40 AM

That's what I bought - cyclonecom on Dec 14, 2006, 6:52 PM

Re: That's what I bought - Rick Manley on Dec 15, 2006, 1:05 PM

Chris, how much is that unit from Sears? - CharlieHJr on Dec 14, 2006, 6:20 PM

Sorry, I meant how much is the unit from SAM's - CharlieHJr on Dec 14, 2006, 6:25 PM

price - chris windham on Dec 15, 2006, 9:29 AM

Slid-a-link.. View Entire Thread - FredR on Dec 6, 2006, 5:35 PM

65-73 mustang and 70-71 torino use...... - ADave on Dec 6, 2006, 7:09 PM

Re: 65-73 mustang and 70-71 torino use...... - FredR on Dec 6, 2006, 7:39 PM

Cal-Tracs - Tore on Dec 6, 2006, 7:47 PM

Slide-a-links... - KenW on Dec 6, 2006, 10:23 PM

We were looking... - KenW on Dec 6, 2006, 10:29 PM

Happy customer - Ken Blades on Dec 6, 2006, 10:51 PM

Re: Happy customer - FredR on Dec 7, 2006, 9:30 AM

Weight - Ken Blades on Dec 7, 2006, 1:26 PM

x - Halowe on Dec 7, 2006, 1:58 PM

Huh? - Ken Blades on Dec 7, 2006, 3:03 PM

x - Halowe on Dec 7, 2006, 3:41 PM

x - Halowe on Dec 7, 2006, 5:00 PM

What's your point?? - Ken Blades on Dec 7, 2006, 5:21 PM

x - Halowe on Dec 7, 2006, 5:34 PM

Okee doke - Ken Blades on Dec 7, 2006, 6:06 PM

What does squat do? Robs the car of time and traction - Greg Pettit on Dec 7, 2006, 6:44 PM

x - Halowe on Dec 7, 2006, 10:24 PM

No need to drop the subject, Halowe - Greg Pettit on Dec 7, 2006, 10:36 PM

x - Halowe on Dec 8, 2006, 11:43 AM

Re: An explanation for those of you that don't know what we're talking about. - Rick Manley on Dec 9, 2006, 10:32 PM

x - Halowe on Dec 9, 2006, 11:54 PM

Re: Weight - FredR on Dec 7, 2006, 2:00 PM

slid a linc - giz on Dec 7, 2006, 5:59 PM

No, that sounds good to me, giz - Greg Pettit on Dec 7, 2006, 6:49 PM

Extra leaf - giz on Dec 7, 2006, 8:44 PM

If there are doubters (or only 1)... - KenW on Dec 8, 2006, 7:02 PM

x - Halowe on Dec 9, 2006, 9:38 AM

As demonstrated... - KenW on Dec 9, 2006, 11:00 AM

x - Halowe on Dec 9, 2006, 12:52 PM

I dont know squat!! - TorinoStyle2 on Dec 10, 2006, 5:25 AM

x - Halowe on Dec 11, 2006, 11:19 AM

Halowe - Greg Pettit on Dec 13, 2006, 9:27 PM

I just got... - Halowe on Dec 14, 2006, 12:25 PM

Hope I did not convey any ill will - Greg Pettit on Dec 14, 2006, 5:13 PM

chassis shock - cyclonecom on Dec 14, 2006, 6:57 PM

No, none at all. - Halowe on Dec 14, 2006, 9:12 PM

My Old School set up - Jimmy B on Dec 14, 2006, 10:29 PM

Me too - Ken Blades on Dec 14, 2006, 10:29 PM

Re: Me too - Halowe on Dec 15, 2006, 9:34 AM

my ford 460.... View Entire Thread - john sollner on Dec 14, 2006, 8:22 PM

see what you done? - gary o on Dec 14, 2006, 9:28 PM

its got a 9" Ford Rear! - john sollner on Dec 14, 2006, 10:34 PM

Funny how.. - Matt Z. on Dec 15, 2006, 9:15 AM

Removing radiator support ???? View Entire Thread - Barry on Dec 14, 2006, 4:38 PM

Re: Removing radiator support ???? - TorinoStyle2 on Dec 15, 2006, 1:25 AM

Driving from Dallas to Monmouth, IL this weekend to pick up the Wagon chassis View Entire Thread - Greg Pettit on Dec 14, 2006, 11:44 AM

Is that a old ASA chassis n/m - Matt Z. on Dec 14, 2006, 12:29 PM

wagon pic - Phil on Dec 14, 2006, 12:48 PM

Phil, Dwyan might not like that shaker comment! LOL - Greg Pettit on Dec 14, 2006, 5:15 PM

wagon looks mint - Rob K on Dec 14, 2006, 4:00 PM

Greg, let me know what time you are coming through - CharlieHJr on Dec 14, 2006, 5:05 PM

Might just do that - Greg Pettit on Dec 14, 2006, 5:13 PM

I am in St. Louis - CharlieHJr on Dec 14, 2006, 6:09 PM

Sounds like a good place to take a break on the way back on Sunday - Greg Pettit on Dec 14, 2006, 10:53 PM

torque spec question View Entire Thread - gary o on Dec 13, 2006, 4:14 PM

ask at 385 - Phil on Dec 13, 2006, 4:17 PM

Re: ask at 385 - Grizz on Dec 14, 2006, 1:23 PM

thanks grizz - gary o on Dec 14, 2006, 8:49 PM

Four fun... View Entire Thread - Make mine a 69 on Dec 10, 2006, 11:00 PM

Looks like fun - Matt Zimmerman on Dec 11, 2006, 9:12 AM

Thanks Matt.... - Make mine a 69 on Dec 11, 2006, 5:51 PM

rear bumpers - Matt Z. on Dec 11, 2006, 6:40 PM

yes!! that's cool... - Make mine a 69 on Dec 11, 2006, 7:03 PM

Matt Z....rear bumper ? - Make mine a 69 on Dec 13, 2006, 6:18 PM

RE: rear bumper ? - Matt Z. on Dec 13, 2006, 7:58 PM

Awww thought so.... - Make mine a 69 on Dec 14, 2006, 6:47 PM

351C View Entire Thread - Mika on Dec 8, 2006, 7:01 AM

anywhere near michigan - glennz on Dec 8, 2006, 8:41 AM

Glenn - Bob on Dec 8, 2006, 4:30 PM

Anybody need a 302 long block core (Alabama) - Oldbutspry on Dec 8, 2006, 4:46 PM

no, do not have any FE stuff as of now - glennz on Dec 9, 2006, 12:00 AM

I have 2 - Dave W on Dec 9, 2006, 2:49 AM

351 - mika on Dec 14, 2006, 5:31 PM

Re: no, do not have any FE stuff as of now - Bob on Dec 9, 2006, 10:24 AM

FE....you mean Freakin Expensive.....n/m - Kevin on Dec 9, 2006, 12:22 PM

Yea - Bob on Dec 9, 2006, 4:57 PM

roller rocker set up $800 - glennz on Dec 9, 2006, 6:23 PM

351C - mika on Dec 14, 2006, 5:30 PM

what? View Entire Thread - Phil on Dec 14, 2006, 2:40 PM

Mustang??????? - Bob on Dec 14, 2006, 3:09 PM

Re: Mustang??????? - Rick Manley on Dec 14, 2006, 3:31 PM

Re: Mustang??????? - Kyle Lehrmann on Dec 14, 2006, 4:58 PM

It's so nice working on a rust free Torino (LOL) View Entire Thread - Matt Z. on Dec 12, 2006, 8:05 PM

WOW! - mcford on Dec 12, 2006, 9:17 PM

WOW +1 - Phil on Dec 13, 2006, 8:04 AM

Thanks - Matt Z. on Dec 14, 2006, 2:12 PM

Bigger challenge - Phil on Dec 14, 2006, 2:14 PM

"Black betty tribute" - Phil on Dec 14, 2006, 2:26 PM

I hear ya Phil. - AL on Dec 14, 2006, 4:14 PM

model mania - magmatt on Dec 14, 2006, 4:38 PM

scratch builds you say - Matt Z. on Dec 14, 2006, 4:44 PM

GT for sale. View Entire Thread - Jeff on Dec 14, 2006, 2:42 PM

nice find - Phil on Dec 14, 2006, 2:45 PM

Nice car, even nicer price...wonder if eBay will have copyright issues... - Gerard in San Diego on Dec 14, 2006, 3:03 PM

Removing a toploader View Entire Thread - Joel on Dec 12, 2006, 10:47 AM

I'd like to know also. - JohnP on Dec 12, 2006, 11:37 AM

That long awating clutch job - Dave on Dec 12, 2006, 7:05 PM

The lever must be removed.... - Gerard in San Diego on Dec 12, 2006, 11:41 AM

Hurst lever on mine is easy to remove - JohnP on Dec 12, 2006, 11:52 AM

Re: Hurst lever on mine is easy to remove - Halowe on Dec 12, 2006, 12:06 PM

Picture - Joel on Dec 12, 2006, 12:08 PM

Not what I was expecting... - Gerard in San Diego on Dec 12, 2006, 1:14 PM

Think those 2 bolts remove the complete shifter. - JohnP on Dec 12, 2006, 2:22 PM

shifter - Bill on Dec 12, 2006, 2:37 PM

Picture From the Shop Manual - Danno on Dec 12, 2006, 6:02 PM

just pull the shifter handle out - mcford on Dec 12, 2006, 6:36 PM

Re: just pull the shifter handle out - Bill on Dec 13, 2006, 3:34 PM

Wow, thanks! - Joel on Dec 13, 2006, 11:05 PM

Re: Wow, thanks! - Rick Manley on Dec 14, 2006, 9:00 AM

Cool - Bill on Dec 14, 2006, 12:41 PM

just a few new pics View Entire Thread - Al on Dec 11, 2006, 11:20 PM

Looks great. - Chris J. on Dec 11, 2006, 11:41 PM

finishes - Al on Dec 12, 2006, 10:28 AM

defenitly consdier the aod, - glennz on Dec 12, 2006, 11:59 AM

AOD is the cats pajamas - Phil on Dec 12, 2006, 1:17 PM

overdrive - Al on Dec 12, 2006, 1:33 PM

ok lets start with the trans then the engine stuff - glennz on Dec 12, 2006, 4:39 PM

aod - Matt Z. on Dec 12, 2006, 5:11 PM

AOD & 351C easy - Rob Day on Dec 14, 2006, 12:30 PM

I LOVE THAT COLOR - TODD on Dec 12, 2006, 1:30 AM

Gorgeous. - Phil on Dec 12, 2006, 7:59 AM

PRETTY - TODD on Dec 12, 2006, 10:18 PM

Can any of you Chevy *ahem* guys decode this VIN? View Entire Thread - Phil on Dec 11, 2006, 1:31 PM

Is it a green Camaro? - ADave on Dec 11, 2006, 2:37 PM

According to my buddy- not originally - Phil on Dec 11, 2006, 2:59 PM

Wow, what a time warp! - Gerard in San Diego on Dec 11, 2006, 4:33 PM

Two different cars - FElony on Dec 11, 2006, 6:08 PM

More - FElony on Dec 11, 2006, 6:23 PM

Re: According to my buddy- not originally - Tobywan on Dec 11, 2006, 6:46 PM

Go here - FElony on Dec 11, 2006, 2:55 PM

LMAO - Phil on Dec 11, 2006, 2:59 PM

Phil your not going to cross over to the - Allen on Dec 11, 2006, 5:34 PM

Don't you feel better now, all you GM guys coming out of the closet? - Greg M. on Dec 12, 2006, 6:13 AM

Well - FElony on Dec 12, 2006, 8:44 PM

A certain code on the plate. . . - Diego on Dec 11, 2006, 5:45 PM

some infoz FYI (caution! chevy forum link) - Phil on Dec 14, 2006, 10:41 AM

My painting progress... View Entire Thread - john sollner on Dec 12, 2006, 7:38 PM

Looks like.... - KenW on Dec 12, 2006, 7:41 PM

Its not me, I have no hair! - john sollner on Dec 12, 2006, 7:49 PM

Re: Its not me, I have no hair! - Bob on Dec 12, 2006, 8:33 PM

roger - john sollner on Dec 13, 2006, 1:30 PM

Ebay... - Make mine a 69 on Dec 13, 2006, 6:01 PM

Fordlord - Don on Dec 13, 2006, 6:21 PM

Re: Fordlord - john sollner on Dec 14, 2006, 9:15 AM

ANYBODY ON HERE BUY THAT 69 COBRA in Lost Gatos for $5000?? View Entire Thread - TODD on Dec 12, 2006, 10:23 PM

No but - Bob on Dec 13, 2006, 11:55 AM

for $5000? - TODD on Dec 13, 2006, 11:33 PM

Bob's 69 Cobra is very very nice. - Chris J. on Dec 14, 2006, 7:08 AM

Cobra - Bob on Dec 14, 2006, 8:14 AM

Well the Fairlane looks a lot different now... View Entire Thread - Steven on Dec 10, 2006, 9:42 PM

ok, heres goes... I LIKEY! - mcford on Dec 10, 2006, 10:04 PM

Yeah....hell yeah!! - TorinoStyle2 on Dec 10, 2006, 10:14 PM

yes, all Ford power - Steven on Dec 10, 2006, 10:21 PM

Here you go.. - Steven on Dec 10, 2006, 10:17 PM

definitely thumbs up - mcford on Dec 11, 2006, 7:24 AM

I like it. - Dave W on Dec 10, 2006, 10:40 PM

nice wheels - martin71gt on Dec 10, 2006, 10:41 PM

Sweet looking ride........just one thing.. - Kevin on Dec 10, 2006, 10:58 PM

Re: Sweet looking ride........just one thing.. - Steven on Dec 10, 2006, 11:15 PM

Yea, thanks - Steven on Dec 10, 2006, 11:13 PM

looks great! - Jay on Dec 10, 2006, 11:32 PM

look'n sharp, man... - Cory Johnson on Dec 11, 2006, 8:58 AM

Re: Well the Fairlane looks a lot different now... - gary o on Dec 11, 2006, 12:38 PM

I like it. A lot! - Phil on Dec 11, 2006, 1:23 PM

Re: I like it. A lot! - Bob on Dec 11, 2006, 7:11 PM

GT style hood - Rob K on Dec 11, 2006, 7:45 PM

But then - Steven on Dec 11, 2006, 8:24 PM

could of masked off the blue then - Rob K on Dec 11, 2006, 8:41 PM

Close but no cigar - Steven on Dec 11, 2006, 9:04 PM

Two-tone like this? - Barry on Dec 12, 2006, 1:11 AM

I'll be straight with you... - Oldbutspry on Dec 11, 2006, 9:29 PM

Or better yet...do both! - Oldbutspry on Dec 11, 2006, 10:14 PM

Yes! Let the readers decide. - Chris J. on Dec 11, 2006, 11:51 PM

Just my opinion - Al on Dec 11, 2006, 11:11 PM

"SO, what do you think?" - Phil on Dec 12, 2006, 9:44 AM

LOL! - Oldbutspry on Dec 12, 2006, 10:10 AM

I wasn't singling anyone out :) - Phil on Dec 12, 2006, 10:22 AM

Rust Job - Steven on Dec 12, 2006, 10:29 AM

Aw, come on Phil... - Al on Dec 12, 2006, 10:15 AM

lol - Steven on Dec 12, 2006, 10:22 AM

That's ok - Steven on Dec 12, 2006, 10:16 AM

ooo lots of responses while I was typing :) - Phil on Dec 12, 2006, 10:28 AM

Shakers - Oldbutspry on Dec 12, 2006, 10:39 AM

Two-tone hardtop - Barry on Dec 12, 2006, 1:17 PM

thats where I'd break the colors - Phil on Dec 12, 2006, 1:50 PM

Love the car overall, but the hood is not my bag - Greg Pettit on Dec 13, 2006, 6:47 PM

Glad you... - Matt Z. on Dec 14, 2006, 8:07 AM

meh nevermind View Entire Thread - Phil on Dec 13, 2006, 10:32 AM

No - Bob on Dec 13, 2006, 3:06 PM

Nothin - Phil on Dec 13, 2006, 3:14 PM

Well, then you shoulda made up sumpthin.... - Gerard in San Diego on Dec 13, 2006, 5:50 PM

nuthin from nuthin leaves nuthin... i got nuthin else to say.. n/m - Make mine a 69 on Dec 13, 2006, 6:03 PM

Here we go - Bob on Dec 13, 2006, 6:20 PM

Aw come on ! - ADave on Dec 13, 2006, 8:12 PM

who dat? - Orin500XL on Dec 14, 2006, 12:45 AM

Who dat who say who dat? - Orin500XL on Dec 14, 2006, 12:46 AM

Anyone buy parts from this place View Entire Thread - Matt Z. on Dec 13, 2006, 9:35 PM

No, but there sure is a . . - Orin500XL on Dec 14, 2006, 12:42 AM

Anyone have a KwikLift? How do you like it? View Entire Thread - JohnP on Dec 11, 2006, 12:00 PM

Re: Anyone have a KwikLift? How do you like it? - Mike the Cobra on Dec 11, 2006, 2:03 PM

I have one.... - Jeff H. on Dec 13, 2006, 9:09 PM

Is this Merc trunk emblem missing a backing plate? View Entire Thread - Tom in Miami on Dec 12, 2006, 9:07 PM

tom r u bidding on it - jack kuepper on Dec 12, 2006, 9:48 PM

Dont plan to bid. Part may be incomplete seller didn't reply - Tom in Miami on Dec 12, 2006, 10:35 PM

looks like... - TODD on Dec 12, 2006, 10:41 PM

Going Going Gone - TODD on Dec 12, 2006, 10:44 PM

DANG $80 bucks!?!? - TODD on Dec 12, 2006, 10:46 PM

Someone tell me, is this part incomplete? - Tom in Miami on Dec 12, 2006, 11:11 PM

It apears to be complete, but I don't think you know what it is - hawkrod on Dec 13, 2006, 1:18 AM

ads show it was used on Montegos, Similar emblems on full sized - Tom in Miami on Dec 13, 2006, 9:07 PM

item covers the keyhole on trunk of some Montegos - Tom in Miami on Dec 12, 2006, 11:17 PM

I believe the part is from this.... - TODD on Dec 12, 2006, 11:26 PM

Nope, it isn't that part, it is what the seller says it is. See my post above N/M - hawkrod on Dec 13, 2006, 9:55 AM

ebay links below showing this emblem. 1. General purpose? - Tom in Miami on Dec 13, 2006, 7:04 PM

trunk lid of 70 Cyclone advertisement - Tom in Miami on Dec 13, 2006, 7:22 PM

70 beige Montego post card. emblem on trunk - Tom in Miami on Dec 13, 2006, 7:30 PM

grill, 70 Montego - Tom in Miami on Dec 13, 2006, 9:03 PM

Carb question View Entire Thread - Anonymous on Dec 13, 2006, 8:57 PM

70 Torino GT View Entire Thread - Gary on Dec 13, 2006, 5:12 PM

For a car with shaker, louvers and rimblow - Barry on Dec 13, 2006, 5:17 PM

I'd be afraid - Oldbutspry on Dec 13, 2006, 5:33 PM

Check out this "Just completed ground up restoration" and "Documented one of one" View Entire Thread - Pete Schwind on Dec 12, 2006, 6:25 PM

Except for... - KenW on Dec 12, 2006, 7:46 PM

I also like the body colored engine bay.. - Jay on Dec 13, 2006, 3:14 PM

I like the car - Oldbutspry on Dec 12, 2006, 7:48 PM

Lotta hoopla, little substance - Gerard in San Diego on Dec 12, 2006, 7:53 PM

I should clarify.... - Pete Schwind on Dec 12, 2006, 7:56 PM

Re: I should clarify.... - ADave on Dec 12, 2006, 8:32 PM

Dash - Ken Blades on Dec 12, 2006, 9:02 PM

Crooked Antenna? Metal Cobra Badges? No Cobra Decals? 71 Rear emblem? - TODD on Dec 12, 2006, 9:48 PM

At Least - TODD on Dec 12, 2006, 9:51 PM

What color is the front hood support? - Jay on Dec 12, 2006, 10:32 PM

Must have been a one of one.... - Kevin on Dec 13, 2006, 12:15 AM

pricey - JeffM on Dec 13, 2006, 1:08 AM

That car was featured in Super Ford in the early 1980's... - Mike_R on Dec 13, 2006, 8:15 AM

Perfect example of what happens when...... - Chris J. on Dec 13, 2006, 8:25 AM

RESTORED MEANS ORIGINAL RIGHT? - AL on Dec 13, 2006, 1:35 PM

I'd be proud to have this car if I built it - Phil on Dec 13, 2006, 1:49 PM

Thats just the point...more money than brains means... - Greg M. on Dec 13, 2006, 3:44 PM

At least they saw through that one pile - Phil on Dec 13, 2006, 3:52 PM

Phil, which one are you talking about? - Greg M. on Dec 13, 2006, 5:32 PM

Good website for Torino Info View Entire Thread - Ryan on Dec 13, 2006, 2:25 PM

Thanks - Bob on Dec 13, 2006, 3:04 PM

O/T 2007 FordFE.com Calendar is ready! View Entire Thread - Pippin on Dec 13, 2006, 1:59 PM

Tailight trim? View Entire Thread - john sollner on Dec 12, 2006, 7:33 PM

Taillight Bzel - Dick Blotz on Dec 13, 2006, 9:48 AM

hey , ya got it posted! - Phil on Dec 13, 2006, 9:54 AM

4 door? - Matt Z. on Dec 13, 2006, 11:26 AM

4door? - Bob on Dec 13, 2006, 11:52 AM

I know where there is a 4 door - Matt Z. on Dec 13, 2006, 12:11 PM

Re: Tailight trim? - Bob on Dec 13, 2006, 11:59 AM

Gear Reducer - $1000??? View Entire Thread - Danno on Dec 12, 2006, 6:22 PM

GOOD QUESTION..I Will CHeck - TODD on Dec 12, 2006, 10:08 PM

Some trucks do have them but only really high gears - hawkrod on Dec 13, 2006, 1:22 AM

I was told that the 4.56 Ratio Bronco/F150 used them - walt on Dec 13, 2006, 5:07 AM

They may use reducers but not that one - hawkrod on Dec 13, 2006, 9:57 AM

cleaning my 302 heads View Entire Thread - chris on Dec 13, 2006, 12:35 AM

acetone - gary o on Dec 13, 2006, 1:42 AM

I have used... - KenW on Dec 13, 2006, 7:18 AM

For Sale: 4 Magnum styled wheels/tires Southern California - also, flat hood View Entire Thread - Steven on Dec 11, 2006, 10:20 AM

Those are not Magnum 500s. - ADave on Dec 11, 2006, 10:47 AM

Re: Those are not Magnum 500s. - Steven on Dec 11, 2006, 11:06 AM

They actually are Magnum 500's - hawkrod on Dec 11, 2006, 12:11 PM

Technically, they are Magnums but not Magnum 500's. - Halowe on Dec 11, 2006, 12:28 PM

Mine came off a last-generation Ranchero - Barry on Dec 11, 2006, 12:53 PM

I stand corrected, I did not realize that was the difference N/M - hawkrod on Dec 11, 2006, 1:04 PM

Great deal on a flat hood! - Oldbutspry on Dec 11, 2006, 11:05 AM

The rims used on the 66 shelby ...... - ADave on Dec 11, 2006, 2:36 PM

Steven, what size tires are on the wheels? n/m - Jay on Dec 11, 2006, 4:55 PM

I will check the tire size.. email me at.. - Steven on Dec 11, 2006, 5:09 PM

The Poor guy just wanted to sell his parts..not get a lecture on the history of wheels - TODD on Dec 12, 2006, 1:42 AM

Perhaps so, but... - Halowe on Dec 12, 2006, 12:17 PM

No Prob - Steven on Dec 12, 2006, 12:45 PM

Price - Barry on Dec 12, 2006, 1:09 PM

Thanks - Steven on Dec 12, 2006, 6:19 PM

$250 sounds like a great price - Oldbutspry on Dec 12, 2006, 11:51 PM

Prices and nomenclature confusion. - Halowe on Dec 12, 2006, 3:43 PM

then we better get on other folks - mcford on Dec 12, 2006, 6:34 PM

Right on Mike... - KenW on Dec 12, 2006, 7:39 PM

Re: Right on Mike... - Halowe on Dec 12, 2006, 10:09 PM

hey are you related to hawkrod LOL N/M - glennz on Dec 12, 2006, 10:11 PM

Re: hey are you related to hawkrod LOL N/M - Halowe on Dec 12, 2006, 10:13 PM

Re: then we better get on other folks - Halowe on Dec 12, 2006, 10:12 PM

not a personal shot at you - mcford on Dec 12, 2006, 10:31 PM

Thanks for that clarification... - Halowe on Dec 12, 2006, 11:05 PM

1974 torino sales brochure calls them - mcford on Dec 12, 2006, 10:23 PM

Thank You. N/M - hawkrod on Dec 13, 2006, 1:07 AM

Let him sell his parts....start your own thread to rant - TODD on Dec 12, 2006, 10:01 PM

Re: Let him sell his parts....start your own thread to rant - Halowe on Dec 12, 2006, 10:11 PM

...Again - TODD on Dec 12, 2006, 10:24 PM

Todd... - Halowe on Dec 12, 2006, 10:28 PM

Halowe - TODD on Dec 12, 2006, 10:31 PM

Re: Halowe - Halowe on Dec 12, 2006, 11:01 PM

Hey Blades... - KenW on Dec 12, 2006, 11:05 PM

OK, OK... - KenW on Dec 12, 2006, 11:07 PM

Re: OK, OK... - Halowe on Dec 12, 2006, 11:14 PM

I think this is appropriate! - TODD on Dec 12, 2006, 11:35 PM

fenders and scoop hood 71 View Entire Thread - ed on Dec 12, 2006, 7:04 PM

Where? - Oldbutspry on Dec 12, 2006, 7:15 PM

Re: fenders and scoop hood 71 - ed on Dec 12, 2006, 8:05 PM

Re: fenders and scoop hood 71 - Matt in HBG on Dec 12, 2006, 8:33 PM

e mail me - FORD-GUY on Dec 13, 2006, 12:50 AM

Need help with clutch fork I.D. View Entire Thread - Tony on Dec 12, 2006, 7:05 PM

Re: Need help with clutch fork I.D. - Tony on Dec 12, 2006, 11:37 PM

My "Barn Find" View Entire Thread - Ed Raden aka Pontiac Ed on Dec 11, 2006, 12:15 AM

Looks great! - Oldbutspry on Dec 11, 2006, 12:21 AM

Another pic - Ed Raden aka Pontiac Ed on Dec 11, 2006, 12:27 AM

Awesome! - Barry on Dec 11, 2006, 12:29 AM

The wheels are on the invoice - Ed Raden aka Pontiac Ed on Dec 11, 2006, 12:31 AM

Tires - Barry on Dec 11, 2006, 12:34 AM

Those we're on there back in '81 when he got it - Ed Raden aka Pontiac Ed on Dec 11, 2006, 12:37 AM

A third pic - Ed Raden aka Pontiac Ed on Dec 11, 2006, 12:30 AM

MORE MORE I WANNA SEE MORE!!! - TODD on Dec 11, 2006, 1:09 AM

Wanna see more....Gotta see more... - Greg M. on Dec 11, 2006, 7:16 AM

Those wheels... - Ed Raden aka Pontiac Ed on Dec 11, 2006, 9:54 AM

Where was it sitting all this time... - Ed Raden aka Pontiac Ed on Dec 11, 2006, 9:52 AM

Looks good! - JohnP on Dec 11, 2006, 10:38 AM

One More Pic - Ed Raden aka Pontiac Ed on Dec 11, 2006, 7:27 PM

Requires the Rev limiter - Chris on Dec 11, 2006, 7:42 PM

What's the rev limiter look like? - Ed Raden aka Pontiac Ed on Dec 11, 2006, 7:43 PM

Nice find! Rev limiter info. - SnakeOnWheels on Dec 11, 2006, 7:54 PM

What's a typical price for a nice one? - Ed Raden aka Pontiac Ed on Dec 11, 2006, 8:02 PM

Repop $450.00 Original $600-$850 depending on condition n/m - SnakeOnWheels on Dec 11, 2006, 8:26 PM

Yes im sure the repo one is being made in Australia - Chris on Dec 12, 2006, 12:03 AM

$$$ Shaker, Speedo reducer, Staggered Shocks, Buildsheet $$$ - TODD on Dec 12, 2006, 1:27 AM

I'm fairly confident about the speedo reducer & staggered shocks, but... - Ed Raden aka Pontiac Ed on Dec 12, 2006, 9:36 AM

Any good parts sources to locate for the correct SCJ rev limiter and carb? - Ed Raden aka Pontiac Ed on Dec 12, 2006, 5:56 PM

"Stick around" - TODD on Dec 12, 2006, 10:16 PM

I NEED HELP! please! charging problem! View Entire Thread - Cory Johnson on Dec 12, 2006, 9:27 PM

Re: I NEED HELP! please! charging problem! - Tony on Dec 12, 2006, 9:34 PM

Windshield interchange question View Entire Thread - SnakeOnWheels on Dec 12, 2006, 5:08 PM

I think - Matt Z. on Dec 12, 2006, 5:13 PM

Re: Windshield interchange question - Ron on Dec 12, 2006, 8:33 PM

front end interchange View Entire Thread - ed on Dec 12, 2006, 7:01 PM

passenger door mirror? View Entire Thread - john sollner on Dec 11, 2006, 7:10 PM

They came both ways from the factory - brent on Dec 12, 2006, 1:38 PM

After I hit my house I added sport mirrors to my next car - Phil on Dec 12, 2006, 2:08 PM

I have a pair of sport mirros if needed. - Everett Grabeel on Dec 12, 2006, 5:23 PM

Anyone needing a red 71" Laser Stripe kit? View Entire Thread - Everett Grabeel on Dec 12, 2006, 2:21 PM

Ev - SnakeOnWheels on Dec 12, 2006, 5:10 PM

Thanks Snake. N/M - Everett Grabeel on Dec 12, 2006, 5:17 PM

Gerard, did you get my email??? View Entire Thread - Phil on Dec 12, 2006, 3:12 PM

Maybe not.... - Gerard in San Diego on Dec 12, 2006, 3:55 PM

Indeed they did - Phil on Dec 12, 2006, 4:18 PM

Attn Brad w/ the blue Cobra View Entire Thread - Matt in HBG on Dec 8, 2006, 11:02 PM

Sorry for the delay responding, - Brad on Dec 11, 2006, 10:52 AM

Re: Sorry for the delay responding, - Matt in HBG on Dec 11, 2006, 5:16 PM

I just sent you a test email. n/m - Brad on Dec 12, 2006, 2:44 PM

Mike the cobra View Entire Thread - Bob on Dec 10, 2006, 11:59 AM

Re: Mike the cobra - Mike the Cobra on Dec 11, 2006, 2:05 PM

sympathy - Truck on Dec 11, 2006, 3:06 PM

My condolences as well... - Greg M. on Dec 12, 2006, 2:05 PM

what brand battery are you using? View Entire Thread - Rob K on Dec 11, 2006, 10:34 PM

I have one Die-Hard, 2 Optima Red Tops, and 2 Duralast from Autozone. - Chris J. on Dec 11, 2006, 11:38 PM

I dont know - ADave on Dec 11, 2006, 11:51 PM

Duralast from Autozone - chris windham on Dec 12, 2006, 9:33 AM

Duralast from Autozone - Phil on Dec 12, 2006, 9:52 AM

Optima - Clarko on Dec 12, 2006, 1:25 PM

Its that time of the year again...BARRETT JACKSON! View Entire Thread - Greg M. on Dec 12, 2006, 6:27 AM

what do you guys think of these wheels on a '70 torino? View Entire Thread - Jay on Dec 10, 2006, 9:43 PM

I think... - Steven on Dec 10, 2006, 9:45 PM

Vintage 48"s on a 71 Torino - martin71gt on Dec 10, 2006, 11:27 PM

Vintage 48 - FElony on Dec 11, 2006, 12:48 AM

Here is a SET OF FORD MINILITES FOR SALE!! - TODD on Dec 11, 2006, 1:19 AM

thanks for the heads up! - Jay on Dec 11, 2006, 3:24 PM

DANG....NO BIDS!!!! SOMEBODY BUY THEM!!!! - TODD on Dec 12, 2006, 1:50 AM

At a shop around the corner from me......... View Entire Thread - ADave on Dec 11, 2006, 11:47 PM

He needs a chute like they use for hang gliders - Oldbutspry on Dec 12, 2006, 12:17 AM

69 Torino Exhaust View Entire Thread - john on Oct 18, 2006, 5:59 PM

The best sounding exhaust I have ever had - Greg Pettit on Oct 18, 2006, 11:14 PM

My only complaint about Flowmasters... - Steve R. in DSO 57 on Oct 19, 2006, 10:23 AM

Exhaust - Joel on Oct 19, 2006, 10:27 AM

Joel, which Dynomax Ultra Flo mufflers did you have? - Chris J. on Oct 20, 2006, 1:31 PM

Ultra Flo Welded - Joel on Oct 20, 2006, 3:17 PM

other torino - john on Oct 22, 2006, 11:38 PM

For what it's worth... - JIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIMMMM!!!! on Oct 19, 2006, 11:54 AM

Re: For what it's worth... - john on Oct 20, 2006, 12:50 PM

Didn't know it was a vert. - JIIIIIMMMM!!! on Oct 20, 2006, 4:51 PM

I have under my vert.... - Make mine a 69 on Oct 20, 2006, 5:27 PM

Re: I have under my vert.... - ADave on Oct 20, 2006, 10:16 PM

I have 2.5 with H and dynomax ultra flows - Phil on Oct 23, 2006, 8:01 AM

part number - john on Nov 28, 2006, 4:32 PM

hey Jimmmmmmm - john sollner on Dec 11, 2006, 3:37 PM

Vid of my setup, and opinion - Tony on Nov 29, 2006, 1:05 AM

Re: Vid of my setup, and opinion - Rick Manley on Nov 29, 2006, 7:52 AM

vid of my exhaust - Cory Johnson on Dec 11, 2006, 4:01 PM

Hoodlum? - FElony on Dec 11, 2006, 5:29 PM

Re: Hoodlum? - Tony on Dec 11, 2006, 8:08 PM

Re: Hoodlum? - FElony on Dec 11, 2006, 8:24 PM

<< Prev

11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Next >>