Torino / Cyclone Technical Forum (Page 16 )

Torino / Cyclone Technical Forum This is a technical discussion platform for the Ford / Mercury midsize line of cars, the Torino and the Cyclone. In this forum you are able to put uploaded images in your posts, and use signatures if you like. Images are kept in posts for 1 week then the system removes them. This is not a club, there is no where to create photo albums. This is for the exchange of information on the cars we love, Torinos and Cyclones. Owner / Moderator; Mike the Cobra. Email mike-the-cobra@torinocobra.com Moderators; Phil (70brougham) and ADave. Absolutely NO POSTS are allowed relating to Politics, Religion, Alternative Lifestyles, or any other "inflamatory" subject (you know what they are). These kind of posts will be deleted IMMEDIATELY! I have spent too many years building this forum into the best Torino Technical forum on the internet, and will not allow people to be driven away. Let's try to keep it to cars for the most part!!!

Network54 Message: New search for free forums is available. Please test and try it here!

Not logged in | Login | Create Account

Search Post a new message!

Paypal ebay scams View Entire Thread - Terry on Jan 8, 2007, 10:45 PM

I have a 74 torino clock and,,,, View Entire Thread - ADave on Jan 8, 2007, 9:26 PM

yes - mcford on Jan 8, 2007, 10:15 PM

Mr. Huff Huff......... View Entire Thread - ADave on Jan 8, 2007, 9:24 PM

Got a Marty Report for Christmas! View Entire Thread - Derek on Dec 26, 2006, 5:29 PM

Color - Pete on Dec 26, 2006, 5:34 PM

Um . . . - Diego on Dec 26, 2006, 7:41 PM

I'll post it in a couple of days. - Derek on Dec 26, 2006, 11:30 PM

Bump!! nm - Diego on Jan 7, 2007, 10:00 AM

Oops, guess I forgot to post it. - Derek on Jan 8, 2007, 6:58 PM

Gracias! nm - Diego on Jan 8, 2007, 7:58 PM

The Marti Report... - KenW on Dec 26, 2006, 9:39 PM

yellow ragtop at top of page is.... - ADave on Dec 26, 2006, 10:21 PM

Good! - Derek on Dec 26, 2006, 11:32 PM

While on the subject of paint... - Greg M. on Dec 27, 2006, 7:14 AM

Competition yellow/ Bright Yellow.....same pail!! - Kevin on Dec 27, 2006, 10:33 AM

also called - Rob K on Dec 27, 2006, 11:23 AM

"Nice...I Like..." n/m - Greg M on Dec 27, 2006, 4:45 PM

"Order Type: Stock" - Derek on Jan 8, 2007, 7:00 PM

yes - mcford on Jan 8, 2007, 9:10 PM

Windshield Washer Squirter Bottle for a 70' View Entire Thread - Mark on Dec 26, 2006, 12:58 PM

Thanks - giz on Dec 27, 2006, 5:35 PM

kinda hard to find in my experience - Phil on Dec 27, 2006, 8:07 PM

I have been looking at those NOS 71 mustang - Allen on Dec 28, 2006, 1:08 PM

No problem Griz - FORD-GUY on Dec 28, 2006, 12:05 AM

Ford Guy-Ray - giz on Jan 7, 2007, 11:36 PM

Yours and Mcfords Parts will Ship Today - FORD-GUY on Jan 8, 2007, 12:01 PM

Thanks - giz on Jan 8, 2007, 7:04 PM

I just saw one on ebay I think yesterday - Jerome on Jan 8, 2007, 12:49 AM

69 - 70 Torino the same - Daryl H. on Jan 8, 2007, 7:09 PM

Mercury vert guys... View Entire Thread - Make mine a 69 on Jan 7, 2007, 1:12 PM

try this - Bob on Jan 7, 2007, 2:50 PM

thanks Bob... - Make mine a 69 on Jan 8, 2007, 12:32 PM

68-9 like 70-1 Try DC - Robert Day on Jan 8, 2007, 1:00 PM

The dilema... - Make mine a 69 on Jan 8, 2007, 2:52 PM

Found the phone number Bob , Thanks again... n/m - Make mine a 69 on Jan 8, 2007, 2:57 PM

Re: thanks Bob... - Bob on Jan 8, 2007, 4:19 PM

Arizona cars are gone. - Make mine a 69 on Jan 8, 2007, 5:56 PM

joel: cj exhaust manifolds on n code heads View Entire Thread - gary o on Jan 4, 2007, 8:14 PM

Thanks - Joel on Jan 4, 2007, 10:20 PM

no problem - gary o on Jan 4, 2007, 11:20 PM

pic - gary o on Jan 6, 2007, 7:25 PM

Whoa! - Joel on Jan 7, 2007, 1:20 AM

I have SCJ manifolds on my N code - Derek on Jan 7, 2007, 1:31 AM

what heads? - gary o on Jan 7, 2007, 7:41 PM

If I remember right they are D2. - Derek on Jan 7, 2007, 7:48 PM

Re: If I remember right they are D2. - gary o on Jan 7, 2007, 8:02 PM

Good topic to discuss because this is the next move I am - Brad on Jan 8, 2007, 4:32 PM

scj intake - gary o on Jan 8, 2007, 4:46 PM

Cool, that explains it - Joel on Jan 8, 2007, 4:54 PM

O/T photobucket pro questions View Entire Thread - Mike in ATL/NOLA on Jan 8, 2007, 4:11 PM

Some pics of Gregs rollbar (10s here we come)! View Entire Thread - Jeff Pettit on Jan 6, 2007, 5:33 PM

Nice job guys. - KenW on Jan 6, 2007, 5:42 PM

Don't forget... - KenW on Jan 6, 2007, 5:44 PM

Re: Don't forget... - Jeff Pettit on Jan 6, 2007, 5:53 PM

Is this a custom job or a kit? - Cory Johnson on Jan 6, 2007, 6:16 PM

Thanks for posting the pics, bro - Greg Pettit on Jan 6, 2007, 7:54 PM

Re: Some pics of Gregs rollbar (10s here we come)! - gary o on Jan 6, 2007, 8:20 PM

Lookin good - TorinoStyle2 on Jan 6, 2007, 9:01 PM

Nice times, TorinoStyle! - Greg Pettit on Jan 7, 2007, 10:09 AM

Gary - Greg Pettit on Jan 7, 2007, 10:14 AM

You need one for 10s - Phil on Jan 7, 2007, 1:49 PM

texas outsiders - gary o on Jan 7, 2007, 7:48 PM

Re: texas outsiders - gary o on Jan 8, 2007, 2:41 PM

Proof that Chevy and Ford can get along...... View Entire Thread - Barry on Jan 7, 2007, 11:15 AM

Re: Proof that Chevy and Ford can get along...... - Rick Manley on Jan 7, 2007, 4:48 PM

Thats hilarious... - Greg M on Jan 7, 2007, 6:10 PM

Our Next Air Craft Carrier will be a Ford - Tom in Miami on Jan 7, 2007, 9:00 PM

Yep, powered by...... - Barry on Jan 7, 2007, 9:30 PM

Add the middle name - Tim Rumley on Jan 8, 2007, 7:40 AM

There you go, trying to make them not get along again - Barry on Jan 8, 2007, 11:54 AM

76 Elite View Entire Thread - charles on Jan 7, 2007, 3:30 PM

Re: 76 Elite - mcford on Jan 7, 2007, 3:48 PM

The good news - Steve R. in DSO 57 on Jan 8, 2007, 9:52 AM

AAaaagghHHHHHHHH!!!!!!!!!!- Ebay, now what? View Entire Thread - Phil on Jan 4, 2007, 4:01 PM

Phil you need to set your Ebay preferences to USA only - SnakeOnWheels on Jan 4, 2007, 4:24 PM

When you set up the auction it asks what countries... - Phil on Jan 4, 2007, 4:28 PM

Re: When you set up the auction it asks what countries... - SnakeOnWheels on Jan 4, 2007, 4:50 PM

Ahh I see- here is the guy's shipping costs: - Phil on Jan 4, 2007, 4:51 PM

Again... make sure you check the "signature required" box if it the deal goes thru n/m - SnakeOnWheels on Jan 4, 2007, 4:58 PM

Dont do it (at least I wouldnt) - Pete on Jan 4, 2007, 7:30 PM

Overseas - Jeff on Jan 4, 2007, 7:39 PM

Phil .... - ADave on Jan 4, 2007, 8:00 PM

No.....Don't block Canada... - Kevin on Jan 4, 2007, 8:23 PM

The latest- this HAS to be a scam. TX guys, any help? - Phil on Jan 4, 2007, 10:52 PM

Report it to ebay - Greg Pettit on Jan 4, 2007, 10:56 PM

Done- I sent an email to the guy too. - Phil on Jan 4, 2007, 11:45 PM

Oh yeah, I won't block Canada - Phil on Jan 4, 2007, 11:52 PM

Makes me mad reading about it - eBay CSI - Steve R. in DSO 57 on Jan 5, 2007, 12:01 AM

Unleash the power of teh intarweb! - Phil on Jan 5, 2007, 12:08 AM

phil, not sure if you noticed - glennz on Jan 5, 2007, 9:08 AM

Thanks Glenn- another response - Phil on Jan 5, 2007, 9:14 AM

Never take a certified check for anything..... - Barry on Jan 5, 2007, 3:10 PM

UPDATE - Our findings are inconclusive... - Steve R. in DSO 57 on Jan 8, 2007, 9:33 AM

WABX View Entire Thread - giz on Jan 7, 2007, 12:07 AM

Way, Way OT- WABX- long post - Mike the Cobra on Jan 7, 2007, 9:15 AM

Interesting read MIke..... - Kevin on Jan 7, 2007, 11:02 AM

Kevin. ... - Make mine a 69 on Jan 7, 2007, 12:22 PM

CJON...OZ....where are you to yourself.....!! - Kevin on Jan 7, 2007, 12:34 PM

Yes, just north of Toronto - Make mine a 69 on Jan 7, 2007, 1:07 PM

I 'm originally from... - KenW on Jan 7, 2007, 3:07 PM

Know the area well... - Make mine a 69 on Jan 7, 2007, 7:13 PM

WLS - Rick Manley on Jan 7, 2007, 8:17 PM

Hey me too - Make mine a 69 on Jan 7, 2007, 8:48 PM

Mike, wuz it abx or rif.... - giz on Jan 7, 2007, 11:03 PM

not real sure... - Mike the Cobra on Jan 8, 2007, 6:35 AM

Even more way of OT.... Detroit Rock - Mike the Cobra on Jan 8, 2007, 7:02 AM

Faded Magnum center caps..this weekends experiment View Entire Thread - SnakeOnWheels on Jan 7, 2007, 10:57 PM

SWWEEETTT!!!!!!!! - Todd on Jan 8, 2007, 2:29 AM

Talk is cheap View Entire Thread - Oldbutspry on Jan 6, 2007, 3:59 PM

Re: Talk is cheap - Mike the Cobra on Jan 6, 2007, 4:11 PM

It's too bad - Earl Nagle on Jan 6, 2007, 7:58 PM

Ditto - Greg Pettit on Jan 6, 2007, 8:02 PM

done - gary o on Jan 6, 2007, 4:18 PM

Sorry you got jammed in the middle. - Tony I on Jan 6, 2007, 4:57 PM

Great forum Mike! Keep up the good work! - Troy Leming on Jan 6, 2007, 8:15 PM

My contribution is in - Danno on Jan 6, 2007, 8:17 PM

Ok Guys.. - Mike the Cobra on Jan 6, 2007, 9:44 PM

mike - giz on Jan 6, 2007, 11:22 PM

about this site - Bob on Jan 7, 2007, 11:37 AM

Ah....the flowing accolades.... - Kevin on Jan 7, 2007, 12:21 PM

Ignore all the crap Mike, we don't know what we would do without you!....nm - TCH on Jan 7, 2007, 1:33 PM

Your time and effort is appreciated, Mike the Cobra. - Chris J. on Jan 7, 2007, 3:13 PM

Mike, thanks for listening to us... - Greg M on Jan 7, 2007, 6:18 PM

Re: Mike, thanks for listening to us... - Rick Manley on Jan 7, 2007, 7:08 PM

heres to mike,the forum and the the good people here - lawrence butler on Jan 8, 2007, 1:45 AM

OT - ABS Code Question View Entire Thread - Derek on Jan 7, 2007, 2:00 AM

try this... - Mike Ruo on Jan 7, 2007, 10:38 PM

Thanks, I'll give that a shot. - Derek on Jan 7, 2007, 11:56 PM

Glad I held on to her View Entire Thread - BlueOvalDave on Jan 3, 2007, 11:31 AM

Hell yeah Dave. welcome back to the fold. - Phil on Jan 3, 2007, 11:53 AM

Back in the fold - BlueOvalDave on Jan 4, 2007, 4:48 PM

Bro was sold, My Torino is "Crispy", this car is a Fairlane 500 - Phil on Jan 4, 2007, 4:53 PM

I can help you out... - Mike Ruo on Jan 7, 2007, 10:43 PM

Just in the off chance someone here may have this View Entire Thread - Chris on Jan 7, 2007, 8:37 PM

welding head View Entire Thread - gary o on Jan 7, 2007, 2:20 AM

Re: welding head - FredR on Jan 7, 2007, 10:05 AM

thanks fred - gary o on Jan 7, 2007, 7:55 PM

Getting some paperwork View Entire Thread - KenW. on Jan 4, 2007, 6:48 PM

Cool idea...never thought of trying that. - Barry on Jan 4, 2007, 6:53 PM

Sent the dealer... - KenW on Jan 5, 2007, 5:50 PM

IT's two brothers... - KenW on Jan 5, 2007, 6:40 PM

Congrats, Ken, on an awesome find... - Greg M on Jan 6, 2007, 9:46 AM

I got the info on the original owner... - KenW on Jan 6, 2007, 10:23 AM

Good Job - CJJTulsa on Jan 6, 2007, 11:39 AM

I just wrote... - KenW on Jan 6, 2007, 1:19 PM

Thats the ticket... - Greg M on Jan 7, 2007, 6:33 PM

Ordering Springs Soon View Entire Thread - Danno on Jan 6, 2007, 7:58 PM

Also looking to replace leaf springs.... - vince on Jan 6, 2007, 9:50 PM

I dunno - Danno on Jan 6, 2007, 10:28 PM

i've asked the same question - tominark on Jan 6, 2007, 10:47 PM

Re: i've asked the same question - gary o on Jan 6, 2007, 11:53 PM

I had my ... - KenW on Jan 7, 2007, 10:25 AM

Not me, I added the $26 helper springs from Summit. - Phil on Jan 7, 2007, 1:47 PM

Hey, the gas tank is behind the seat too... - Gerard in San Diego on Jan 7, 2007, 2:24 PM

I have Eatons on my '70 GT - Derek on Jan 7, 2007, 3:32 PM

Anybody Help Identify intake? View Entire Thread - Terry on Jan 6, 2007, 5:24 PM

Numbers - Pete on Jan 6, 2007, 6:10 PM

With the big S it could be.... - ADave on Jan 6, 2007, 6:36 PM

S was on a 67 i did that was a GT 390 car N/M - glennz on Jan 6, 2007, 7:00 PM

Re: S was on a 67 i did that was a GT 390 car N/M - CJJTulsa on Jan 6, 2007, 7:29 PM

Re: Anybody Help Identify intake? - gary o on Jan 6, 2007, 7:31 PM

Some pics - Terry on Jan 7, 2007, 12:38 AM

Thats an FE intake. - ADave on Jan 7, 2007, 12:51 AM

S Intakes - FElony on Jan 7, 2007, 1:26 PM

Coil springs View Entire Thread - reedspaint on Jan 5, 2007, 6:00 PM

Which engine? - Gerard in San Diego on Jan 6, 2007, 11:08 AM

429 CJ - reedspaint on Jan 6, 2007, 11:39 AM

I got a set from a forum member - Joel on Jan 7, 2007, 10:24 AM

Re: Coil springs - Matt in HBG on Jan 6, 2007, 11:35 AM

exhaust gaskets View Entire Thread - dragford on Jan 7, 2007, 10:00 AM

Changing jobs in a few weeks...Time to start parting out again! View Entire Thread - Troy Leming on Jan 6, 2007, 11:07 PM

Cyclone Gt - Thomas on Jan 6, 2007, 11:35 PM

Hey Troy - Oldbutspry on Jan 7, 2007, 2:53 AM

Good luck on you new job! - Jonathan Freeman on Jan 7, 2007, 9:52 AM

Trivia Question View Entire Thread - Barry on Jan 4, 2007, 7:06 PM

Re: Trivia Question - SnakeOnWheels on Jan 4, 2007, 7:14 PM

Whoa.....very good! - Barry on Jan 4, 2007, 7:29 PM

Oh, and...... - Barry on Jan 4, 2007, 7:36 PM

Re: Oh, and...... - giz on Jan 4, 2007, 8:09 PM

We went there... - JackG on Jan 4, 2007, 8:27 PM

Re: Whoa.....very good! - SnakeOnWheels on Jan 4, 2007, 7:56 PM

Snake, you local? - Barry on Jan 4, 2007, 9:03 PM

Central California - giz on Jan 4, 2007, 9:46 PM

Barry yes....East Bay - SnakeOnWheels on Jan 4, 2007, 9:53 PM

Roseville, northeast of Sacramento - Barry on Jan 5, 2007, 1:01 AM

hot august nights - nick on Jan 5, 2007, 2:33 AM

Torinos @ H.A.N. - Barry on Jan 5, 2007, 12:56 PM

dosen't have to be pretty - nick on Jan 5, 2007, 7:42 PM

Nick, where are you located? - Barry on Jan 6, 2007, 12:05 PM

in Rohnert Park, ca - nick on Jan 6, 2007, 6:55 PM

Yep know right where that is - Barry on Jan 7, 2007, 1:58 AM

Re: Roseville, northeast of Sacramento - SnakeOnWheels on Jan 6, 2007, 8:00 PM

Nice fish! - Barry on Jan 7, 2007, 1:51 AM

anyone using a 77 granada master cylinder on a 70t? View Entire Thread - Robert on Dec 30, 2006, 9:48 AM

I am using one on my 67 mustang. - Everett Grabeel on Dec 30, 2006, 11:49 AM

Re: anyone using a 77 granada master cylinder on a 70t? - chris on Dec 31, 2006, 6:50 PM

master cylinder - Robert on Dec 31, 2006, 11:20 PM

Converting to manual front disc????? - Anonymous on Jan 4, 2007, 9:11 AM

You should be able to use the Granada master cylinder - Steve R. in DSO 57 on Jan 4, 2007, 10:49 AM

Re: Converting to manual front disc????? - chris on Jan 4, 2007, 10:29 PM

72 was first of STD non pwr discs - Robert Day on Jan 6, 2007, 11:39 PM

BTW: Gran Torino - Robert Day on Jan 6, 2007, 11:40 PM

searching for a 1971 cyclone gt fuel tank View Entire Thread - chris on Jan 4, 2007, 10:47 PM

Got a 71 tank in Chicago - ADave on Jan 5, 2007, 12:49 AM

pictures - chris on Jan 5, 2007, 4:40 PM

Oh hell yes, rockin the blue interior. - Phil on Jan 5, 2007, 4:43 PM

Re: Oh hell yes, rockin the blue interior. - chris on Jan 5, 2007, 4:47 PM

Re: pictures - gary o on Jan 6, 2007, 7:59 PM

I have a 71 Cyclone undergoing frame off resto - Rorshach on Jan 6, 2007, 4:14 PM

Very nice find. - ADave on Jan 6, 2007, 6:33 PM

Cool - Danno on Jan 6, 2007, 8:20 PM

Wonder if it on the Cyclone Montego Torino Registry? - Robert Day on Jan 6, 2007, 11:33 PM

troy lemming View Entire Thread - tominark on Jan 6, 2007, 10:51 PM

70-71 Torino GT buyers Guide in View Entire Thread - Earl Nagle on Dec 31, 2006, 8:40 PM

Earl do you know Bob Wells??????? - mcgoo on Jan 1, 2007, 2:33 PM

Naw - Earl Nagle on Jan 1, 2007, 6:36 PM

Saw that, I like that 71 GT. n/m - Chris J. on Jan 1, 2007, 2:46 PM

I just glanced thru the article but there seemed to be some mistakes... - TCH on Jan 3, 2007, 8:56 AM

Nice coverage but errors - Robert Day on Jan 5, 2007, 4:28 PM

You're right Bob - Earl Nagle on Jan 6, 2007, 7:52 PM

Muscle Machines is generally well put together.... - vince on Jan 6, 2007, 9:55 PM

locking rear differential? View Entire Thread - Ryan on Jan 5, 2007, 8:46 AM

can't go wrong with a detroit locker - glennz on Jan 5, 2007, 8:57 AM

Re: can't go wrong with a detroit locker - chris on Jan 5, 2007, 4:24 PM

Go with a good Air Locker - chris windham on Jan 5, 2007, 9:02 AM

"I�m running a 351 Cleveland with around 700+ hp on two stages of nitrous." - Phil on Jan 5, 2007, 9:05 AM

uses air to make the rear differential lock in - glennz on Jan 5, 2007, 9:11 AM

Powertrax? - Ryan on Jan 5, 2007, 9:31 AM

Detroit Locker all the way - Greg Pettit on Jan 5, 2007, 9:40 AM

Thanks for the input - Ryan on Jan 5, 2007, 9:51 AM

WOW - AL on Jan 5, 2007, 10:27 AM

cool another good link... - chris windham on Jan 5, 2007, 10:46 AM

I have a Detroit Locker... - KenW on Jan 5, 2007, 5:45 PM

Locker - Jeff on Jan 6, 2007, 5:25 PM

Which combo should I go with View Entire Thread - Jerome on Jan 2, 2007, 11:23 AM

351/460 bolt patterns are different - Phil on Jan 2, 2007, 12:26 PM

yeah but which should I get? - Jerome on Jan 2, 2007, 12:30 PM

dunno - Phil on Jan 2, 2007, 12:37 PM

speed and thrust - Jerome on Jan 2, 2007, 12:45 PM

79 engine inf. - Jerome on Jan 2, 2007, 12:50 PM

What would you do with the 460? - Oldbutspry on Jan 2, 2007, 12:37 PM

Agreed, the spending won't stop with the aquisition. - Phil on Jan 2, 2007, 12:40 PM

Well I did the same debate - Phil on Jan 2, 2007, 1:16 PM

Thanks for the advice - Jerome on Jan 2, 2007, 1:26 PM

C-6 tailshaft lenght - Ken on Jan 3, 2007, 1:59 PM

Things are going my way - Jerome on Jan 3, 2007, 9:48 AM

I would think the intake and exhaust could (would?) be different. Dr. Z? - Phil on Jan 3, 2007, 9:53 AM

Yes, 2v and 4v heads are significantly different.. - Jay on Jan 3, 2007, 10:03 AM

Not only that, the first year for the Cleveland was 1970 - Greg Pettit on Jan 3, 2007, 10:50 AM

well not the right way to do it but - glennz on Jan 3, 2007, 3:48 PM

351C cylinder head id - Jerome on Jan 3, 2007, 7:17 PM

4v head, maybe CJ - Oldbutspry on Jan 3, 2007, 7:39 PM

D3ZZ-AA - CJJTulsa on Jan 3, 2007, 9:38 PM

I'll check out the size but I know the id says.. - Jerome on Jan 3, 2007, 10:42 PM

Oops - CJJTulsa on Jan 4, 2007, 12:32 AM

70-74 Cobra Jet heads - Jerome on Jan 4, 2007, 12:34 PM

Got my engine today.. - Jerome on Jan 5, 2007, 12:52 PM

I'm confused - Joel on Jan 5, 2007, 3:03 PM

Just need block - Jerome on Jan 5, 2007, 3:41 PM

Re: Just need block - matt on Jan 6, 2007, 10:43 AM

Oh I definitely will be doing that.... - Jerome on Jan 6, 2007, 1:50 PM

Re: Oh I definitely will be doing that.... - Oldbutspry on Jan 6, 2007, 3:46 PM

upgrading little at a time - Jerome on Jan 6, 2007, 4:09 PM

what would be a fair price for my car?? View Entire Thread - Cory Johnson on Jan 4, 2007, 3:33 PM

You already know - Oldbutspry on Jan 4, 2007, 4:21 PM

your prob. right... - Cory Johnson on Jan 4, 2007, 4:44 PM

i would try a different tact - Oldbutspry on Jan 4, 2007, 8:36 PM

I have cash burning a hole in my pocket. - Greg Pettit on Jan 4, 2007, 8:43 PM

Save up greg... - Cory Johnson on Jan 4, 2007, 9:55 PM

How much if I opt for the "extra scoop delete" pkg? LOL - Greg Pettit on Jan 4, 2007, 10:24 PM

I might give it to you for free.... - Cory Johnson on Jan 4, 2007, 10:36 PM

Dang - Oldbutspry on Jan 4, 2007, 10:42 PM

OBS, it's all in good fun - Greg Pettit on Jan 4, 2007, 10:53 PM

It better be cheap, - Everett Grabeel on Jan 4, 2007, 11:43 PM

yhea, I would hate to dive up the prices...... - Cory Johnson on Jan 5, 2007, 9:02 AM

I'm fine now..... - Cory Johnson on Jan 5, 2007, 8:59 AM

Round -Up - Daryl H. on Jan 6, 2007, 1:24 PM

Waterless car wash View Entire Thread - KenW on Jan 6, 2007, 9:09 AM

Re: Waterless car wash - FredR on Jan 6, 2007, 9:56 AM

Thanks Fred... - KenW on Jan 6, 2007, 10:19 AM

Ken....what's the theme?? - Kevin on Jan 6, 2007, 12:29 PM

LOL... - KenW on Jan 6, 2007, 1:16 PM

O/T - Christmas family shot and my new concern View Entire Thread - Pete Schwind on Jan 6, 2007, 12:46 PM

Re: O/T - Christmas family shot and my new concern - mcford on Jan 6, 2007, 1:01 PM

I deleted the post View Entire Thread - Mike the Cobra on Jan 5, 2007, 12:14 PM

And now I just deleted another - Mike the Cobra on Jan 5, 2007, 7:46 PM

And now finally..... - Mike the Cobra on Jan 6, 2007, 8:58 AM

need some help View Entire Thread - jim on Jan 5, 2007, 6:51 PM

DSO code -280730 ?? View Entire Thread - rusty on Jan 4, 2007, 10:19 AM

answered my own question. I'll try to do better next time - rusty on Jan 4, 2007, 10:31 AM

Its from Mars - Phil on Jan 4, 2007, 10:32 AM

No Way!!!! - Kevin on Jan 5, 2007, 6:30 PM

Likely went to Louisville (28) - Robert Day on Jan 5, 2007, 4:23 PM

Never seen this paint treatment before.... View Entire Thread - Barry on Jan 4, 2007, 5:19 PM

Here's its match - SnakeOnWheels on Jan 4, 2007, 5:31 PM

Man what is it with CA right now....? - chris windham on Jan 5, 2007, 10:53 AM

California Dreamin' - Barry on Jan 5, 2007, 12:52 PM

And the reason you've . . . - Orin500XL on Jan 5, 2007, 5:48 PM

Yes, that was implied.....lol n/m - Barry on Jan 5, 2007, 5:53 PM

I need a speedo cable! View Entire Thread - kiltboy on Jan 5, 2007, 3:40 PM

Mr. Speedometer... - KenW on Jan 5, 2007, 5:47 PM

my chevy bud sent me this pic/link View Entire Thread - Phil on Jan 5, 2007, 4:52 PM

Cracking !! - Make mine a 69 on Jan 5, 2007, 5:30 PM

semi-OT Question for FE experts or maybe amateurs.. View Entire Thread - Jay on Jan 5, 2007, 1:27 PM

ok..found some info..still interested in opinions - Jay on Jan 5, 2007, 1:36 PM

No Expert - CJJTulsa on Jan 5, 2007, 2:52 PM

Value - depends - Joel on Jan 5, 2007, 3:02 PM

gonna order suspension parts... View Entire Thread - Brian on Jan 4, 2007, 2:20 PM

PST is widely accepted as quality - Phil on Jan 4, 2007, 2:31 PM

Here is the Vendor. ANOTHER BOOKMARK - Phil on Jan 4, 2007, 3:03 PM

Sweet thanks... - Brian on Jan 5, 2007, 9:35 AM

are they Poly U or rubber??? - Brian on Jan 5, 2007, 9:39 AM

Rubber - Phil on Jan 5, 2007, 10:05 AM

thanks phil View Entire Thread - dragford on Jan 4, 2007, 11:57 PM

If by "store" you mean, hand me "$2500 for it" then OK! - Phil on Jan 5, 2007, 12:20 AM

mostly - dragford on Jan 5, 2007, 9:58 AM

Michigan Guys- Anyone remember a guy in Tecumseh View Entire Thread - Doug in Tecumseh on Jan 4, 2007, 7:14 PM

Mike...please do not lose that lovin feeling View Entire Thread - Brian H on Jan 4, 2007, 1:00 PM

Re: Mike...please do not lose that lovin feeling - Rick Manley on Jan 4, 2007, 4:33 PM

LETTER/NUMBER CODES ON WHEELS View Entire Thread - Keith on Jan 1, 2007, 7:26 AM

I can help with Part of it - walt on Jan 1, 2007, 11:12 AM

I believe the M was for the wheel manufacturer... - Greg M. on Jan 1, 2007, 10:10 PM

Greg; I Thought of that, but he said they were Kelsey Hayes Wheels - walt on Jan 2, 2007, 4:48 AM

I think he has a mixed set of 14 inch rims... - GReg M. on Jan 2, 2007, 5:37 AM

Thanks for the replies - Keith on Jan 4, 2007, 3:44 PM

You have to see this, LOL View Entire Thread - Phil on Jan 4, 2007, 3:28 PM

Lol - SnakeOnWheels on Jan 4, 2007, 3:44 PM

E-bay is getting greedy again! View Entire Thread - Chris J. on Jan 4, 2007, 8:23 AM

seen that - glennz on Jan 4, 2007, 9:56 AM

Gotta keep that goofy smile on Bill Cobb's face - Steve R. in DSO 57 on Jan 4, 2007, 10:39 AM

When you're the only show in town... - Gerard in San Diego on Jan 4, 2007, 11:42 AM

I'm there now - FORD-GUY on Jan 4, 2007, 12:14 PM

Saw this, manual steering box for '70/71 View Entire Thread - Deano on Jan 3, 2007, 9:45 PM

Manual pitman arm - Greg Pettit on Jan 3, 2007, 10:24 PM

BOOKMARK THESE BOYS. - Phil on Jan 4, 2007, 9:08 AM

I Have a complete set up as well - FORD-GUY on Jan 4, 2007, 9:17 AM

Thanks Deano! - Steve R. in DSO 57 on Jan 4, 2007, 10:30 AM

Does anyone know where to get the manual idler arm bushing? - Jay on Jan 4, 2007, 10:42 AM

I bought mine at NAPA - Steve R. in DSO 57 on Jan 4, 2007, 10:58 AM

<< Prev

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Next >>