Whoops guess about $320, can't remember thing for more than 5 min anymore i guess, lol.

May 26 2005, 8:25 PM

You might check out these guys, not sure if they are any good, but they say they have 383/430/462 pistons. Reasonable price $385 or so.
http://cgi.ebay.com/ebaymotors/ws/eBayI ... eName=WD1V

Note: Complete or part of old conversation copied from the archives and brought back to you by admin. The line below shows the original date of the post. New replies can be added if desired. _____________________________________________________ Originally postet by "Mike " April 30 2005 at 3:47 PM ...

Note: Complete or part of old conversation copied from the archives and brought back to you by admin. The line below shows the original date of the post. New replies can be added if desired. _____________________________________________________ Originally postet by "dereknell " April 12 2005 at 1:2...

No score for this post January 10 2005, 7:49 PM I have almost finished this Holley carb (EDGE list 1616) but one thing has bothered me some what. The air bleeds on the primary side. The two inner primary air bleeds are missing, there is just a hole. Is this the way they came from the factory? I've ...

No score for this post November 22 2004, 10:47 PM The carb is an 842 EDGE LIST 1616. I don't have a kit for it. Actually I have lots of new Holley parts and I am pieceing it all together. If you could scan that for me I would really appreciate it. I hope I have the right jets in it. With the 52 pri...

Note: Complete or part of old conversation copied from the archives and brought back to you by admin. The line below shows the original date of the post. New replies can be added if desired. November 21 2004 at 4:40 PM No score for this post _____________________________________________________ I a...

Originally postet by "Brad " Compression Height I just came across this forum and am enjoying the information. I like you have been unable to find piston specs. I have a 1960 Tbird with the 430 Lincoln motor option. The Tbird manual lists the compression ratio at 10.1. I have dismantled the engine ...