CHRIS CRAFT COMMANDER FORUM ® .......A photo-intensive technical reference file and ongoing newsletter regarding the original fiberglass Chris Craft Commander. Our mission at this not-for-profit non-commercial web site is to "have fun and share information" for your individual personal use. Our main reference feature is the ever expanding MASTER INDEX Files which contain exhaustive photo and technical information on the Chris Craft Commander line (like these 38' Commander brochure scans) , (an awesome collection of Chris Craft 427 tuning and specification information), and a few words about how to use the information in the forum, etc. Be sure to look at the information about the 2009 Chris Craft Commander Rendezvous, second year in a row on Lake Erie!! If you're a Commander fan, this will be an event you won't want to miss.

We extend to you a cordial "WELCOME ABOARD !"

This forum is registered as chriscraftcommander.com

 Return to index  

Sealed Power Pistons

May 14 2008 at 12:16 PM		Derek  (no login)


Response to Good Advice
Bill,

I hope you don't mind sharing what you learn from sealed power. I just installed Sealed power flat top pistons (want to say PN# 310P) in my 327Q block, which has also been bored out by .030". I'm also curious if I will be increasing the CR too much.

I have an extra head gasket (came with my gasket kit, but I'll be using a marine head gasket). So if Sealed Power can't/won't give an answer I could install one head and just measure the CR; should be ballpark except for the crushed thickness of the head gasket.

Thanks,

Derek

 
 Respond to this message   
Responses

Contact the Chris Craft Commander Forum
chriscraftcommander@hotmail.com

©2005, ©2006, ©2007, ©2008, Chris-Craft Commander Forum, Inc., ®, chriscraftcommander.com. Information and intellectual property on this not-for-profit non-commercial site may be copied for individual personal use, but any other reproduction or use requires written approval. Any entity who mines this site for names, material, or their other commercial/financial benefit in any way is subject to copyright and intellectual property law; the integrity of this site will be aggressively protected. The material here is for indivudual personal use and is not to be sold. Chris Craft is a registered trademark of Chris-Craft. Neither Chris-Craft nor any subsidiaries of Chris-Craft shall bear any responsibility for the chriscraftcommander.com content, comments, or advertising. Chris Craft Commander Forum, Inc., is independent from Chris Craft (and the Chris Craft Commander Club) and is not affiliated with, sponsored or supported by those organizations in any way. Copyright/trademark/sales mark infringements are not intended, or implied. Don't click on the following link unless you want spam, it's a search engine link. AddMe.com, Search Engine Submission and SEO google37b5db87ae53b031.html