| camJanuary 17 2008 at 4:43 PM | Byron (no login) |
Response to Cam replacement |
| From the beginnig my Starboard engine was running hot, probally due to a bad heat exchanger, I did replace the cam I purchased from Depco Pump, there are several sizes with varying gpm. I steped up one size. I did do a test by teeing hose to the raw water out flow out of the heat exchanger and dumped it into a 5 gallon bucket. I ran each engine and and marked the amount of water. Starboard did produce more water. Its impellor failed with few hours. Next time I get warm I will go straight to the impellor. |
| Responses |
|
|