Ford Transmission Forum

Welcome to the “Ford Transmission Forum”. This is open to everything and anything about Ford transmissions, whether automatic, C4, C6, FMX, Cruise-o-matic, AOD, etc… or manual, Toploader, Dagenham, T-10, T-5, etc… Also covering shifters, clutches, shift kits, torque converters, valve bodies, stock, aftermarket or anything directly related to the transmission of our Fords & Mercurys. Rear axle stuff? This is as good a place as any! 9", 8", 7.5", Open, Traction-Lok, Equa-Lok, Detroit Locker, etc...bring it on! Thanks to the sponsors above that help keep this forum ad & pop-up free. Show your appreciation by clicking on their logo and visit their sites. Please, no bitching, flaming or spamming. Have fun, learn a lot! This site is not associated in any way, shape or form to the Ford Motor Company.

Thanks, Doug Bender "Forum Moderator/Owner" I can be reached at: fairlaniac @ fairlanet.com
Please, if you have a transmission question, direct it to the forum. I truly am a transmission dummy.

A special "THANKS" to Stuart Anderson (Forum Moderator) for his dedication to the forum.

If you forget to login or post anonymously, you'll be assigned the name "Chevy-Lover" :-)

Visitors in this forum in the last 10 minutes: 6 Visitors
6 guests

Not logged in | Login | Create Account

Search Post now!

c4 problem View Entire Thread - larry bogle on Aug 2, 2008, 10:25 PM

Re: c4 problem - Stuart Anderson on Aug 3, 2008, 12:42 AM

Pressure - Gregaust on Aug 3, 2008, 6:01 AM

c4 problem - larry bogle on Aug 4, 2008, 8:22 PM

VB out - Anonymous on Aug 4, 2008, 8:47 PM

Re: c4 problem - Stuart Anderson on Aug 5, 2008, 12:11 AM

Test results... more help needed. View Entire Thread - carlosmaurixio on Jul 25, 2008, 6:31 AM

Re: Test results... more help needed. - Silverfox on Jul 25, 2008, 8:37 AM

Re: Test results... more help needed. - carlosmaurixio on Jul 25, 2008, 5:27 PM

fluid not burnt... - carlosmaurixio on Jul 29, 2008, 2:34 AM

Re: fluid not burnt... - sILVERFOX on Jul 29, 2008, 2:05 PM

i will check - carlosmaurixio on Jul 29, 2008, 4:23 PM

how about these numbers? oil pressure readings: - carlosmaurixio on Jul 29, 2008, 11:19 PM

Re: how about these numbers? oil pressure readings: - Paul on Aug 3, 2008, 11:25 PM

if it came in the kit, it was replaced - carlosmaurixio on Aug 4, 2008, 1:00 AM

Oops - Stuart Anderson on Aug 4, 2008, 9:09 AM

Re: Oops - carlosmaurixio on Aug 4, 2008, 11:34 PM

C6 decoding View Entire Thread - Randy on Aug 4, 2008, 12:42 AM

Re: C6 decoding - Anonymous on Aug 4, 2008, 4:18 AM

Thank you - Randy on Aug 4, 2008, 9:46 AM

Where does this o-ring go? C4 tranny View Entire Thread - carlosmaurixio on Aug 3, 2008, 8:51 PM

Re: Where does this o-ring go? C4 tranny - Paul on Aug 3, 2008, 10:54 PM

strange... - carlosmaurixio on Aug 4, 2008, 1:12 AM

O'Rings - Gregaust on Aug 4, 2008, 6:05 AM

yes! thank you - carlosmaurixio on Aug 4, 2008, 6:43 AM

Will the cooler leak if I instal it this way? View Entire Thread - carlosmaurixio on Jul 26, 2008, 5:52 AM

Probably - Stuart Anderson on Jul 26, 2008, 9:24 AM

Re: Probably - carlosmaurixio on Jul 26, 2008, 5:04 PM

ok - Stuart Anderson on Jul 26, 2008, 5:40 PM

problem solved - carlosmaurixio on Jul 29, 2008, 2:20 AM

I especially like this part. - Stuart Anderson on Jul 29, 2008, 8:08 AM

haha no offense - Carlosmaurixio on Jul 29, 2008, 4:16 PM

Re: haha no offense - Paul on Aug 3, 2008, 11:33 PM

what are you talking about? - carlosmaurixio on Aug 4, 2008, 12:57 AM

Would it be beneficial to increase cooler line diameter? View Entire Thread - carlosmaurixio on Aug 1, 2008, 3:57 AM

Line size - Gregaust on Aug 1, 2008, 5:47 AM

thanks - carlosmaurixio on Aug 1, 2008, 6:01 PM

Re: thanks - Paul on Aug 3, 2008, 11:14 PM

Soft 2-3 shift on C6 question. View Entire Thread - jim carlson on Aug 1, 2008, 11:14 PM

start with the basics - carlosmaurixio on Aug 2, 2008, 3:00 AM

How does a C4 work/shift? View Entire Thread - carlosmaurixio on Jul 14, 2008, 9:58 PM

Check this out - Anonymous on Jul 15, 2008, 12:40 AM

Thanks - carlosmaurixio on Jul 15, 2008, 3:27 AM

Tests - gregaust on Jul 15, 2008, 5:48 AM

Re: Tests - Silverfox on Jul 15, 2008, 10:40 AM

how? - carlosmaurixio on Jul 15, 2008, 5:11 PM

Pressure checks - allenman on Jul 16, 2008, 2:02 AM

what do I look for? - carlosmaurixio on Jul 16, 2008, 5:58 PM

Re: what do I look for? - Stuart Anderson on Jul 16, 2008, 6:22 PM

Thanks... what if? - carlosmaurixio on Jul 17, 2008, 1:04 PM

Re: Thanks... what if? - Stuart Anderson on Jul 17, 2008, 1:15 PM

yes - carlosmaurixio on Jul 17, 2008, 2:50 PM

Re: yes - Stuart Anderson on Jul 17, 2008, 3:19 PM

Re: yes - carlosmaurixio on Jul 17, 2008, 3:31 PM

Re: yes - Stuart Anderson on Jul 17, 2008, 7:01 PM

Re: yes - carlosmaurixio on Jul 17, 2008, 11:46 PM

yabut - Stuart Anderson on Jul 18, 2008, 12:09 AM

Re: how? - Gregaust on Jul 16, 2008, 4:48 AM

Re: how? - Silverfox on Jul 18, 2008, 9:37 AM

what happens if it stays locked up? - carlosmaurixio on Jul 25, 2008, 10:22 PM

lockup - Andy on Aug 1, 2008, 6:23 PM

C4 assembly View Entire Thread - Lewis on Jul 26, 2008, 12:09 AM

Re: C4 assembly - Gregaust on Jul 26, 2008, 5:25 AM

C4 Assembly - Lewis on Jul 26, 2008, 1:55 PM

Re: C4 assembly - carlosmaurixio on Jul 26, 2008, 5:33 AM

Gap too wide - Lewis on Jul 31, 2008, 1:09 AM

Re: Gap too wide - carlosmaurixio on Jul 31, 2008, 1:19 AM

Re: Gap too wide - Silverfox on Jul 31, 2008, 9:20 AM

Be interested in what you find - Gregaust on Jul 31, 2008, 7:12 PM

watch the gap (for LIRR riders) - Andy on Aug 1, 2008, 6:09 PM

2000 Mustang, V-6, trans sometimes wont shift out of low until 20 mph. View Entire Thread - winr1 on Aug 1, 2008, 7:10 AM

Re: 2000 Mustang, V-6, trans sometimes wont shift out of low until 20 mph. - Silverfox on Aug 1, 2008, 8:07 AM

Hi Silverfox.... - winr1 on Aug 1, 2008, 9:42 AM

Re: Hi Silverfox.... - Silverfox on Aug 1, 2008, 12:41 PM

C 6 for sale View Entire Thread - Rod on Jul 31, 2008, 6:26 PM

Tranny swap? View Entire Thread - msest on Jul 27, 2008, 1:27 PM

Re: Tranny swap? - Anonymous on Jul 31, 2008, 6:21 PM

trany problems View Entire Thread - marv on Jul 30, 2008, 8:25 PM

Re: trany problems - Richard Dinsen on Jul 30, 2008, 9:19 PM

Re: trany problems - sILVERFOX on Jul 31, 2008, 9:27 AM

Where can I buy a C4 forward piston, early style? View Entire Thread - Pete in California on Jul 27, 2008, 3:28 PM

Re: Where can I buy a C4 forward piston, early style? - Stuart Anderson on Jul 27, 2008, 9:09 PM

Re: Where can I buy a C4 forward piston, early style? - Gregaust on Jul 28, 2008, 4:37 AM

I got one... - carlosmaurixio on Jul 29, 2008, 2:28 AM

Re: Where can I buy a C4 forward piston, early style? - Anonymous on Jul 30, 2008, 4:07 AM

c-4 B&M shift kit instructions View Entire Thread - Rod on Jul 29, 2008, 11:55 PM

C-O-M problem? View Entire Thread - Mika on May 7, 2008, 5:47 AM

Re: C-O-M problem? - Stuart Anderson on May 7, 2008, 9:53 AM

Re: C-O-M problem? - Mika on May 7, 2008, 10:30 AM

Re: C-O-M problem? - Mika on May 8, 2008, 1:01 PM

One more problem - Mika on May 14, 2008, 9:30 AM

Downshift Clunk - Kingbird on Jul 29, 2008, 11:20 AM

Re: C-O-M problem? - Paul on May 8, 2008, 1:19 AM

Re: C-O-M problem? - Mika on May 8, 2008, 1:39 AM

theory behind fluid dissapearing - carlosmaurixio on Jul 29, 2008, 4:45 PM

A4LD problems View Entire Thread - jack on Jul 27, 2008, 11:40 PM

Re: A4LD problems - Stuart Anderson on Jul 28, 2008, 9:14 AM

overrun clutch - jack on Jul 28, 2008, 10:17 PM

Yes - Stuart Anderson on Jul 29, 2008, 8:11 AM

Need flexplate bolt equalizer ring View Entire Thread - stm-rllr on Jul 28, 2008, 8:45 PM

Junkyard item - Anonymous on Jul 29, 2008, 12:55 AM

Early C-4 Plug View Entire Thread - Lewis on Jul 27, 2008, 12:20 PM

test port - Stuart Anderson on Jul 27, 2008, 9:05 PM

Thanks! - Lewis on Jul 28, 2008, 10:41 AM

c4 slip help View Entire Thread - mitchdublin on Jul 27, 2008, 8:52 PM

Re: c4 slip help - Stuart Anderson on Jul 27, 2008, 9:07 PM

Re: c4 slip help - Anonymous on Jul 27, 2008, 9:18 PM

Re: c4 slip help - Stuart Anderson on Jul 27, 2008, 9:29 PM

1956 ford fmx View Entire Thread - dan on Jul 26, 2008, 3:15 PM

Um - Stuart Anderson on Jul 26, 2008, 3:32 PM

In reply to your email. - Stuart Anderson on Jul 26, 2008, 3:52 PM

FMX in 3rd gear by 20mph View Entire Thread - Jim on Jul 23, 2008, 10:13 AM

Re: FMX in 3rd gear by 20mph - Tha Boss on Jul 23, 2008, 1:10 PM

Re: FMX in 3rd gear by 20mph - ohai on Jul 23, 2008, 9:40 PM

Re: FMX in 3rd gear by 20mph - Stuart Anderson on Jul 23, 2008, 3:21 PM

Re: FMX in 3rd gear by 20mph - ohai on Jul 23, 2008, 9:27 PM

Re: FMX in 3rd gear by 20mph - Stuart Anderson on Jul 23, 2008, 10:00 PM

Re: FMX in 3rd gear by 20mph - ohai on Jul 23, 2008, 10:54 PM

Re: FMX in 3rd gear by 20mph - Stuart Anderson on Jul 24, 2008, 12:12 AM

Re: FMX in 3rd gear by 20mph - Ohai on Jul 24, 2008, 10:01 PM

Shift kit? - allenman on Jul 25, 2008, 1:02 AM

Re: Shift kit? - ohai on Jul 25, 2008, 5:32 AM

AHHA - Stuart Anderson on Jul 25, 2008, 9:09 AM

Re: AHHA - ohai on Jul 25, 2008, 9:54 PM

Back to stock? - allenman on Jul 26, 2008, 12:13 AM

Ignore -repeat - allenman on Jul 26, 2008, 12:15 AM

Re: AHHA - Stuart Anderson on Jul 26, 2008, 1:05 AM

Trans swap View Entire Thread - Ryan on Jul 21, 2008, 9:42 PM

Re: Trans swap - Anonymous on Jul 21, 2008, 10:50 PM

Re: Trans swap - Ryan on Jul 21, 2008, 11:26 PM

Re: Trans swap - Silverfox on Jul 22, 2008, 9:48 AM

Re: Trans swap - Anonymous on Jul 23, 2008, 3:30 AM

Re: Trans swap - allenman on Jul 22, 2008, 11:29 AM

Re: Trans swap - Anonymous on Jul 25, 2008, 2:40 AM

Re: Trans swap - Stuart Anderson on Jul 22, 2008, 11:39 AM

64 Comets with V8 - allenman on Jul 22, 2008, 10:53 PM

This says 289 in 64. - Stuart Anderson on Jul 23, 2008, 12:20 AM

and this says - allenman on Jul 23, 2008, 3:43 PM

Re: and this says - Stuart Anderson on Jul 23, 2008, 7:41 PM

This is interesting! - Stuart Anderson on Jul 24, 2008, 8:43 PM

Re: and this says - Anonymous on Jul 25, 2008, 8:49 AM

c6 shift flair question View Entire Thread - Dustin Rinne on Jul 1, 2008, 2:11 PM

Forgot to mention - Dustin Rinne on Jul 1, 2008, 4:46 PM

Re: c6 shift flair question - Richard Dinsen on Jul 3, 2008, 1:16 PM

Re: c6 shift flair question - Anonymous on Jul 3, 2008, 8:12 PM

Frank.... - Dustin Rinne on Jul 7, 2008, 8:08 AM

Re: Frank.... - fmerkl on Jul 7, 2008, 2:38 PM

re flair 2-3 - aaron carpenter on Jul 24, 2008, 7:04 AM

Can't resist - Anonymous on Jul 7, 2008, 7:07 PM

4r70w View Entire Thread - russ on Jul 20, 2008, 2:13 PM

Re: 4r70w - SIlverfox on Jul 22, 2008, 10:25 AM

4r70w - Anonymous on Jul 23, 2008, 2:29 PM

re4r70w - aaron carpenter on Jul 24, 2008, 6:45 AM

C-4 View Entire Thread - Tha Boss on Jul 23, 2008, 12:53 PM

c4 parts - randy on Jul 23, 2008, 2:30 PM

Re: C-4 - Stuart Anderson on Jul 23, 2008, 3:23 PM

Re: C-4 - Stuart Anderson on Jul 23, 2008, 10:04 PM

92 Escort A/T View Entire Thread - Mike Mooney on Jul 2, 2008, 6:20 PM

Not a Ford transmission - Anonymous on Jul 2, 2008, 6:40 PM

92 Escort A/T - Mike on Jul 22, 2008, 3:40 PM

Installing frontseal on C4 View Entire Thread - AMR66 on Jul 17, 2008, 7:22 PM

Re: Installing frontseal on C4 - Stuart Anderson on Jul 17, 2008, 9:09 PM

Installing frontseal on C4 - AMR66 on Jul 18, 2008, 9:29 AM

Re: Installing frontseal on C4 - Stuart Anderson on Jul 18, 2008, 9:36 AM

Re: Installing frontseal on C4 - Silverfox on Jul 18, 2008, 9:39 AM

Installing frontseal on C4 - Anonymous on Jul 18, 2008, 6:09 PM

Installing frontseal on C4 - AMR66 on Jul 18, 2008, 6:37 PM

Re: Installing frontseal on C4 - Silverfox on Jul 22, 2008, 10:32 AM

Now I need help....? View Entire Thread - Anonymous on Jul 18, 2008, 9:45 PM

Re: Now I need help....? - Silverfox on Jul 22, 2008, 10:27 AM

C4 mudulator vacuum View Entire Thread - Ashley on Jul 19, 2008, 4:37 PM

Re: C4 mudulator vacuum - Anonymous on Jul 20, 2008, 12:11 AM

Vacuum - gregaust on Jul 20, 2008, 6:07 PM

TRANS HELP View Entire Thread - JEFF on Jul 19, 2008, 10:58 PM

Re: TRANS HELP - Anonymous on Jul 20, 2008, 12:09 AM

your c4 - randy on Jul 20, 2008, 2:04 PM

looking for a re-buildable wide ratio toploader... View Entire Thread - Bruce on Jul 20, 2008, 1:19 PM

F-150 Manual tranny identification View Entire Thread - Stan on Jul 16, 2008, 6:10 PM

Re: F-150 Manual tranny identification - Anonymous on Jul 16, 2008, 11:23 PM

Re: F-150 Manual tranny identification - Anonymous on Jul 17, 2008, 4:55 PM

65 stang c4 2nd to 3rd flare not consistant View Entire Thread - skip on Jun 19, 2008, 8:20 AM

"ok" - Stuart Anderson on Jun 19, 2008, 12:15 PM

Re: "ok" - Silverfox on Jun 19, 2008, 1:59 PM

Re: "ok" - skip on Jun 20, 2008, 6:39 AM

Re: "ok" - Silverfox on Jun 20, 2008, 8:22 AM

Re: "ok" - skip on Jun 21, 2008, 6:41 AM

Re: "ok" - Stuart Anderson on Jun 21, 2008, 12:39 PM

Thanks!! - Skip on Jul 4, 2008, 9:39 AM

update - Skip on Jul 6, 2008, 8:50 AM

when hot - Skip on Jul 7, 2008, 7:13 AM

Re: when hot - Silverfox on Jul 7, 2008, 8:24 AM

No - Stuart Anderson on Jul 7, 2008, 10:30 AM

HHHHMMMM - Skip on Jul 9, 2008, 6:36 AM

what i meant was - Skip on Jul 14, 2008, 6:30 AM

Re: what i meant was - Silverfox on Jul 14, 2008, 8:35 AM

not that hard - carlosmaurixio on Jul 15, 2008, 5:36 PM

Re: not that hard - Stuart Anderson on Jul 16, 2008, 6:24 PM

well... - carlosmaurixio on Jul 17, 2008, 1:16 PM

Re: well... - Stuart Anderson on Jul 17, 2008, 1:33 PM

answers... - carlosmaurixio on Jul 17, 2008, 2:45 PM

Re: answers... - Stuart Anderson on Jul 17, 2008, 3:14 PM

run without driveshaft? View Entire Thread - Anonymous on Jul 16, 2008, 11:55 PM

For starters - Stuart Anderson on Jul 17, 2008, 1:03 AM

Re: For starters - Anonymous on Jul 17, 2008, 3:09 AM

you can still do it - carlosmaurixio on Jul 17, 2008, 1:25 PM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Next >>

Click logo to enter advertiser sites