Ford Transmission Forum

Welcome to the “Ford Transmission Forum”. This is open to everything and anything about Ford transmissions, whether automatic, C4, C6, FMX, Cruise-o-matic, AOD, etc… or manual, Toploader, Dagenham, T-10, T-5, etc… Also covering shifters, clutches, shift kits, torque converters, valve bodies, stock, aftermarket or anything directly related to the transmission of our Fords & Mercurys. Rear axle stuff? This is as good a place as any! 9", 8", 7.5", Open, Traction-Lok, Equa-Lok, Detroit Locker, etc...bring it on! Thanks to the sponsors above that help keep this forum ad & pop-up free. Show your appreciation by clicking on their logo and visit their sites. Please, no bitching, flaming or spamming. Have fun, learn a lot! This site is not associated in any way, shape or form to the Ford Motor Company.

Thanks, Doug Bender "Forum Moderator/Owner" I can be reached at: fairlaniac @ fairlanet.com
Please, if you have a transmission question, direct it to the forum. I truly am a transmission dummy.

A special "THANKS" to Stuart Anderson (Forum Moderator) for his dedication to the forum.

If you forget to login or post anonymously, you'll be assigned the name "Chevy-Lover" :-)

Visitors in this forum in the last 10 minutes: 6 Visitors
6 guests

Not logged in | Login | Create Account

Search Post now!

Dual range trans help View Entire Thread - tom cassidy on Mar 18, 2008, 2:55 AM

Re: Dual range trans help - Anonymous on Mar 18, 2008, 4:11 AM

Re: Dual range trans help - Paul on Mar 18, 2008, 4:29 AM

simple A4LD questions View Entire Thread - Anonymous on Mar 17, 2008, 10:17 PM

1969 C4 inner seals O ring vs Square cut any difference? View Entire Thread - Pete on Mar 16, 2008, 4:39 PM

Seals - gregaust on Mar 17, 2008, 5:53 AM

OK, - Pete on Mar 17, 2008, 6:45 PM

2 questions View Entire Thread - TNTampa on Mar 15, 2008, 6:10 PM

Re: 2 questions - silverfox on Mar 16, 2008, 10:01 PM

Re: 2 questions - Paul on Mar 17, 2008, 1:50 AM

Re: 2 questions - Silverfox on Mar 17, 2008, 8:32 AM

if the 83 - 64-TBOLT on Mar 17, 2008, 9:28 AM

3-4 accumulator?? View Entire Thread - Paul on Mar 11, 2008, 12:29 AM

Re: 3-4 accumulator?? - Silverfox on Mar 11, 2008, 8:31 AM

Re: 3-4 accumulator?? - Paul on Mar 16, 2008, 6:31 AM

Re: 3-4 accumulator?? - Silverfox on Mar 16, 2008, 9:59 PM

Re: 3-4 accumulator?? - Paul on Mar 17, 2008, 1:54 AM

Re: 3-4 accumulator?? - Silverfox on Mar 17, 2008, 8:28 AM

FMX shift lever angles of detent View Entire Thread - Matt on Mar 15, 2008, 1:01 AM

Re: FMX shift lever angles of detent - Stuart Anderson on Mar 15, 2008, 1:07 PM

Re: FMX shift lever angles of detent - Matt on Mar 15, 2008, 6:38 PM

Re: FMX shift lever angles of detent - Stuart Anderson on Mar 16, 2008, 6:35 AM

Re: FMX shift lever angles of detent - Matt on Mar 17, 2008, 6:16 AM

aod shift cold shift problem View Entire Thread - bob on Mar 15, 2008, 12:28 PM

Re: aod shift cold shift problem - Paul on Mar 16, 2008, 6:19 AM

Re: aod shift cold shift problem - James Collins on Mar 16, 2008, 4:57 PM

Re: aod shift cold shift problem - Silverfox on Mar 16, 2008, 9:45 PM

93 F150 View Entire Thread - james on Mar 15, 2008, 10:41 PM

Re: 93 F150 - Anonymous on Mar 16, 2008, 3:13 PM

Overhaul AOD Transmission - Measure End Play View Entire Thread - Patrick Frank on Mar 11, 2008, 6:14 PM

Gauge bar thickness - allenman on Mar 11, 2008, 7:12 PM

Re: Gauge bar thickness - Silverfox on Mar 12, 2008, 1:48 PM

Thank you and another question - Patrick Frank on Mar 12, 2008, 5:42 PM

Re: Thank you and another question - Silverfox on Mar 13, 2008, 9:33 AM

9HP rumour - allenman on Mar 13, 2008, 2:00 PM

Re: 9HP rumour - Silverfox on Mar 13, 2008, 3:04 PM

Re: 9HP rumour - James Collins on Mar 14, 2008, 2:50 AM

Re: 9HP rumour - allenman on Mar 15, 2008, 2:00 AM

Thanks again - Patrick Frank on Mar 16, 2008, 3:52 AM

Re: Thanks again - Stuart Anderson on Mar 16, 2008, 6:33 AM

Re: Thanks again - Anonymous on Mar 16, 2008, 1:25 PM

Friction Material View Entire Thread - Silverfox on Mar 13, 2008, 3:26 PM

Re: Friction Material - Silverfox on Mar 14, 2008, 9:40 AM

My 2 cents - gregaust on Mar 15, 2008, 5:58 AM

Allomatic Indy reds - Gregaust on Mar 16, 2008, 3:56 AM

Re: Friction Material - Stuart Anderson on Mar 15, 2008, 5:40 PM

Air check questions 69 C4 View Entire Thread - Pete on Mar 15, 2008, 4:26 PM

C4 air check - Early Ford Ron on Mar 15, 2008, 4:52 PM

Re: Air check questions 69 C4 - Stuart Anderson on Mar 15, 2008, 5:38 PM

Re: Air check questions 69 C4 - kenny on Mar 15, 2008, 9:45 PM

trans swap View Entire Thread - dale on Mar 15, 2008, 1:08 PM

Any tricks to sealing in a 9"? and Lube? View Entire Thread - Steve on Mar 13, 2008, 12:16 AM

Re: Any tricks to sealing in a 9"? and Lube? - gregaust on Mar 13, 2008, 4:07 AM

SF - Silverfox on Mar 13, 2008, 9:13 AM

Re: Any tricks to sealing in a 9"? and Lube? - Anonymous on Mar 14, 2008, 7:45 PM

Re: Any tricks to sealing in a 9"? and Lube? - Anonymous on Mar 14, 2008, 7:49 PM

Thanks! - Steve on Mar 14, 2008, 8:37 PM

Re: Thanks! - Anonymous on Mar 14, 2008, 9:17 PM

A4LD View Entire Thread - Dave on Mar 13, 2008, 6:21 AM

Re: A4LD - Anonymous on Mar 13, 2008, 11:50 AM

Re: A4LD - Anonymous on Mar 13, 2008, 7:31 PM

Re: A4LD - Anonymous on Mar 14, 2008, 7:46 PM

all gears forward View Entire Thread - Dave on Mar 9, 2008, 8:16 PM

Re: all gears forward - Stuart Anderson on Mar 10, 2008, 8:23 AM

Re: all gears forward - Dave on Mar 10, 2008, 9:25 PM

Re: all gears forward - Stuart Anderson on Mar 10, 2008, 9:37 PM

Thanks - Dave on Mar 14, 2008, 6:29 PM

Transmission swap View Entire Thread - mike on Mar 13, 2008, 2:11 PM

Re: Transmission swap - Anonymous on Mar 13, 2008, 7:32 PM

Re: Transmission swap - Stuart Anderson on Mar 13, 2008, 8:22 PM

Re: Transmission swap - Pete on Mar 13, 2008, 11:38 PM

302 flexplate View Entire Thread - Anonymous on Mar 12, 2008, 7:41 PM

50 oz. - Norcal Pete on Mar 12, 2008, 10:54 PM

C4 Tinker View Entire Thread - Silverfox on Mar 11, 2008, 9:34 AM

c4 - randy on Mar 11, 2008, 11:37 PM

Re: c4 - silverfox on Mar 12, 2008, 12:15 AM

Re: C4 Tinker - Anonymous on Mar 12, 2008, 6:16 AM

Re: C4 Tinker - Stuart Anderson on Mar 12, 2008, 8:13 AM

Re: C4 Tinker - Silverfox on Mar 12, 2008, 10:29 AM

look here - Stuart Anderson on Mar 12, 2008, 11:07 AM

Re: look here - Silverfox on Mar 12, 2008, 1:39 PM

Re: look here - Silverfox on Mar 12, 2008, 1:46 PM

Passage sizes - Gregaust on Mar 12, 2008, 7:43 PM

tranny ratio View Entire Thread - john barton on Mar 10, 2008, 11:07 PM

Re: tranny ratio - Silverfox on Mar 11, 2008, 8:34 AM

no granny low - jbarton on Mar 11, 2008, 12:09 PM

Re: no granny low - Silverfox on Mar 11, 2008, 1:39 PM

John Deere Hyguard Fluid View Entire Thread - Silverfox on Mar 6, 2008, 2:17 PM

Re: John Deere Hyguard Fluid - PaulS on Mar 7, 2008, 4:57 AM

Re: John Deere Hyguard Fluid - Stuart Anderson on Mar 7, 2008, 8:08 AM

Re: John Deere Hyguard Fluid - Silverfox on Mar 7, 2008, 9:27 AM

Re: John Deere Hyguard Fluid - Silverfox on Mar 10, 2008, 8:38 AM

Re: John Deere Hyguard Fluid - Paul on Mar 11, 2008, 12:44 AM

Re: John Deere Hyguard Fluid - Silverfox on Mar 11, 2008, 8:28 AM

AOD Shifting Woes View Entire Thread - Eddie on Mar 9, 2008, 7:29 PM

Re: AOD Shifting Woes - Norcal Pete on Mar 9, 2008, 10:58 PM

AOD Shifting Woes - Eddie on Mar 10, 2008, 7:55 AM

Re: AOD Shifting Woes - Silverfox on Mar 10, 2008, 8:22 AM

AOD Shifting Woes - Eddie on Mar 10, 2008, 8:48 PM

Re: AOD Shifting Woes - Stuart Anderson on Mar 10, 2008, 9:41 PM

Re: AOD Shifting Woes - Eddie on Mar 10, 2008, 10:04 PM

Re: AOD Shifting Woes - Stuart Anderson on Mar 11, 2008, 12:29 AM

Re: AOD Shifting Woes - Eddie on Mar 11, 2008, 6:42 AM

Re: AOD Shifting Woes - Silverfox on Mar 11, 2008, 8:24 AM

Synthetic SAE 50 gear oil in Toploader View Entire Thread - Craig Nash on Mar 8, 2008, 10:27 PM

Re: Synthetic SAE 50 gear oil in Toploader - Stuart Anderson on Mar 10, 2008, 8:19 AM

Try and see - Craig Nash on Mar 10, 2008, 10:42 PM

Cruise o Yblock Flexplate View Entire Thread - bryan on Mar 10, 2008, 8:37 PM

c-4 shift problems View Entire Thread - doug renton on Mar 7, 2008, 7:16 PM

Re: c-4 shift problems - gregaust on Mar 7, 2008, 9:46 PM

Re: c-4 shift problems - doug renton on Mar 7, 2008, 11:00 PM

Yes - gregaust on Mar 8, 2008, 3:23 AM

Re: c-4 shift problems - Stuart Anderson on Mar 8, 2008, 8:05 AM

Re: c-4 shift problems - James Collins on Mar 8, 2008, 1:48 PM

Re: c-4 shift problems - James Collins on Mar 8, 2008, 1:53 PM

Re: c-4 shift problems - Silverfox on Mar 10, 2008, 8:33 AM

Re: c-4 shift problems - Anonymous on Mar 10, 2008, 6:38 PM

Questions about my AOD View Entire Thread - Steve Simpson on Mar 8, 2008, 7:28 PM

Re: Questions about my AOD - fmerkl on Mar 9, 2008, 3:26 AM

Re: Questions about my AOD - Steve on Mar 9, 2008, 8:27 AM

Re: Questions about my AOD - James Collins on Mar 9, 2008, 4:24 PM

Re: Questions about my AOD - Steve on Mar 9, 2008, 7:57 PM

Re: Questions about my AOD - Silverfox on Mar 10, 2008, 8:29 AM

C6 "Detent" in case or in valve body?? View Entire Thread - Rick on Mar 9, 2008, 9:36 AM

Re: C6 "Detent" in case or in valve body?? - Anonymous on Mar 9, 2008, 3:33 PM

trouble with 4R100 View Entire Thread - 99whiteford on Mar 8, 2008, 12:34 AM

First step - Stuart Anderson on Mar 8, 2008, 8:10 AM

Re: First step - 99whiteford on Mar 8, 2008, 2:14 PM

Trany and drive issue View Entire Thread - Nikko on Mar 1, 2008, 5:13 AM

Re: Trany and drive issue - James Collins on Mar 1, 2008, 6:43 AM

Re: Trany and drive issue - Silverfox on Mar 3, 2008, 8:34 AM

Re: Trany and drive issue - Stuart Anderson on Mar 3, 2008, 9:31 AM

Re: Trany and drive issue - Anonymous on Mar 3, 2008, 10:23 PM

Re: Trany and drive issue - Silverfox on Mar 4, 2008, 8:25 AM

Re: Trany and drive issue - Stuart Anderson on Mar 4, 2008, 1:03 PM

Re: Trany and drive issue - nikko on Mar 7, 2008, 1:46 AM

Re: Trany and drive issue - Stuart Anderson on Mar 7, 2008, 8:02 AM

Re: Trany and drive issue - PaulS on Mar 7, 2008, 4:50 AM

AOD tips/suggestions View Entire Thread - Tim on Feb 26, 2008, 11:05 AM

up my ally :) - Silverfox on Feb 27, 2008, 8:39 AM

Thanks! - Tim on Feb 28, 2008, 8:28 AM

Re: Thanks! - Anonymous on Mar 2, 2008, 4:33 PM

Re: Thanks! - Tim on Mar 2, 2008, 8:39 PM

Re: Thanks! - Silverfox on Mar 3, 2008, 8:17 AM

Re: Thanks! - Tim on Mar 3, 2008, 9:15 PM

Re: Thanks! - clevelandstyle on Mar 3, 2008, 9:25 PM

Re: Thanks! - Tim on Mar 4, 2008, 7:35 AM

Re: Thanks! - Silverfox on Mar 4, 2008, 8:22 AM

Re: Thanks! - Tim on Mar 4, 2008, 9:06 AM

Re: Thanks! - Silverfox on Mar 4, 2008, 11:54 AM

Dying 4R70W? View Entire Thread - Cougrrcj on Mar 2, 2008, 11:46 AM

Re: Dying 4R70W? - Silverfox on Mar 3, 2008, 8:32 AM

Symptoms - Cougrrcj on Mar 3, 2008, 7:08 PM

Re: Symptoms - Silverfox on Mar 4, 2008, 8:30 AM

AOD to 4R70W Conversion View Entire Thread - Mike on Feb 24, 2008, 2:01 PM

Re: AOD to 4R70W Conversion - Silverfox on Feb 25, 2008, 10:28 AM

Re: AOD to 4R70W Conversion - Mike on Mar 2, 2008, 7:55 PM

Re: AOD to 4R70W Conversion - Silverfox on Mar 3, 2008, 8:20 AM

Re: AOD to 4R70W Conversion - Mike on Mar 3, 2008, 1:36 PM

Re: AOD to 4R70W Conversion - Silverfox on Mar 3, 2008, 2:18 PM

AOD Shift Wows View Entire Thread - James Collins on Feb 23, 2008, 2:25 PM

Re: AOD Shift Wows - Silverfox on Feb 25, 2008, 10:35 AM

Re: AOD Shift Wows - Paul on Feb 25, 2008, 3:32 PM

Re: AOD Shift Wows - Silverfox on Feb 26, 2008, 8:36 AM

AOD Shift Wows - James Collins on Feb 29, 2008, 5:49 PM

Re: AOD Shift Wows - Anonymous on Mar 3, 2008, 8:50 AM

AOD Shift Pattern View Entire Thread - Mark on Feb 10, 2008, 8:52 PM

Re: AOD Shift Pattern - Silverfox on Feb 11, 2008, 8:40 AM

To Silverfox - Mark on Mar 3, 2008, 12:07 AM

Re: To Silverfox - Silverfox on Mar 3, 2008, 8:14 AM

AOD Problem View Entire Thread - Mark Williams on Jan 17, 2008, 8:43 PM

Re: AOD Problem - Silverfox on Jan 18, 2008, 8:45 AM

Re: AOD Problem - James Collins on Feb 24, 2008, 1:15 PM

Fixed - Mark on Mar 3, 2008, 12:03 AM

C6 slip yoke and driveshaft recommendations? View Entire Thread - Steve on Mar 1, 2008, 5:06 PM

Driveshaft - gregaust on Mar 2, 2008, 3:37 AM

Thanks! - Steve on Mar 2, 2008, 11:34 PM

<< Prev

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Next >>

Click logo to enter advertiser sites