Ford Transmission Forum

Welcome to the “Ford Transmission Forum”. This is open to everything and anything about Ford transmissions, whether automatic, C4, C6, FMX, Cruise-o-matic, AOD, etc… or manual, Toploader, Dagenham, T-10, T-5, etc… Also covering shifters, clutches, shift kits, torque converters, valve bodies, stock, aftermarket or anything directly related to the transmission of our Fords & Mercurys. Rear axle stuff? This is as good a place as any! 9", 8", 7.5", Open, Traction-Lok, Equa-Lok, Detroit Locker, etc...bring it on! Thanks to the sponsors above that help keep this forum ad & pop-up free. Show your appreciation by clicking on their logo and visit their sites. Please, no bitching, flaming or spamming. Have fun, learn a lot! This site is not associated in any way, shape or form to the Ford Motor Company.

Thanks, Doug Bender "Forum Moderator/Owner" I can be reached at: fairlaniac @ fairlanet.com
Please, if you have a transmission question, direct it to the forum. I truly am a transmission dummy.

A special "THANKS" to Stuart Anderson (Forum Moderator) for his dedication to the forum.

If you forget to login or post anonymously, you'll be assigned the name "Chevy-Lover" :-)

Visitors in this forum in the last 10 minutes: 6 Visitors
6 guests

Not logged in | Login | Create Account

Search Post now!

fmx problems View Entire Thread - donnie on Sep 6, 2008, 6:39 PM

Re: fmx problems - Stuart Anderson on Sep 6, 2008, 11:21 PM

c-6 servo View Entire Thread - mike on Sep 5, 2008, 10:10 PM

Re: c-6 servo - Stuart Anderson on Sep 5, 2008, 11:39 PM

Re: c-6 servo - mike on Sep 6, 2008, 10:41 AM

Yes - Stuart Anderson on Sep 6, 2008, 12:30 PM

C6 shift kit View Entire Thread - Anonymous on Sep 5, 2008, 8:23 AM

Re: C6 shift kit - Paul on Sep 5, 2008, 9:23 PM

i know that - Anonymous on Sep 6, 2008, 10:59 AM

Yoke Differences View Entire Thread - Brandon on Aug 31, 2008, 1:42 PM

Nope - allenman on Aug 31, 2008, 7:11 PM

ok - Anonymous on Sep 4, 2008, 6:28 PM

Driveshaft length - Craig Nash on Sep 6, 2008, 2:23 AM

c6 wont down shift to first at stop second gear starts View Entire Thread - lost in transland on Dec 15, 2007, 6:28 PM

Re: c6 wont down shift to first at stop second gear starts - Anonymous on Dec 15, 2007, 8:19 PM

Re: c6 wont down shift to first at stop second gear starts - Anonymous on Dec 15, 2007, 8:21 PM

c6 second gear start - lost on Dec 15, 2007, 9:01 PM

c6 second gear shifts - snapper1d on Sep 2, 2008, 1:02 PM

Re: c6 second gear start - ihateminimumwage on Sep 2, 2008, 2:34 PM

Re: c6 second gear start - snapper1d on Sep 2, 2008, 3:10 PM

I have a theory - carlosmaurixio on Sep 2, 2008, 5:39 PM

I have a theory - snapper1d on Sep 2, 2008, 7:42 PM

I hope Mr. Anderson Pipes in here at some point :) - ihateminimumwage on Sep 3, 2008, 1:25 AM

99% of the time - Stuart Anderson on Sep 3, 2008, 2:39 AM

Re: 99% of the time - ihateminimumwage on Sep 3, 2008, 11:26 AM

Re: I hope Mr. Anderson Pipes in here at some point :) - carlosmaurixio on Sep 3, 2008, 3:20 AM

c6 second gear shifts - Anonymous on Sep 3, 2008, 12:23 PM

c6 second gear shifts - snapper1d on Sep 5, 2008, 1:46 PM

Re: c6 second gear shifts - Stuart Anderson on Sep 5, 2008, 11:41 PM

C6 - Slipping in 1st from Complete Stop View Entire Thread - ihateminimumwage on Sep 1, 2008, 7:20 PM

Re: C6 - Slipping in 1st from Complete Stop - carlosmaurixio on Sep 1, 2008, 7:53 PM

It's not first slipping - It won't shift to 1st in D, it's starting in 2nd - ihateminimumwage on Sep 2, 2008, 2:30 PM

Similar thing with me - Anonymous on Sep 4, 2008, 5:40 PM

99% of the time. - Stuart Anderson on Sep 4, 2008, 10:30 PM

No down shift cruse o matic View Entire Thread - les jones on Sep 2, 2008, 10:07 PM

Re: No down shift cruse o matic - carlosmaurixio on Sep 3, 2008, 12:16 AM

No down shift cruise o matic - les jones on Sep 3, 2008, 1:39 PM

Re: No down shift cruise o matic - Paul on Sep 4, 2008, 5:23 AM

Re: No down shift cruse o matic - Stuart Anderson on Sep 4, 2008, 6:31 AM

66 mustang C4 trans View Entire Thread - Carnes on Sep 1, 2008, 1:42 AM

Re: 66 mustang C4 trans - carlosmaurixio on Sep 1, 2008, 3:53 AM

Re: 66 mustang C4 trans - njtinman on Sep 3, 2008, 3:12 PM

1966 - Stuart Anderson on Sep 3, 2008, 4:40 PM

Which gear am I missing? View Entire Thread - putts on Aug 29, 2008, 5:01 PM

Re: Which gear am I missing? - Stuart Anderson on Aug 29, 2008, 7:01 PM

yes that is the prob - putts on Sep 2, 2008, 9:28 AM

Where can I find a filter extension for a c6? View Entire Thread - Dustin on Sep 1, 2008, 4:34 PM

Re: Where can I find a filter extension for a c6? - Stuart Anderson on Sep 1, 2008, 5:24 PM

Re: Where can I find a filter extension for a c6? - Dustin on Sep 1, 2008, 8:13 PM

Ford number - Stuart Anderson on Sep 2, 2008, 12:05 AM

Tube dimensions - Gregaust on Sep 2, 2008, 5:24 AM

C6 problem! View Entire Thread - Mathias on Sep 1, 2008, 5:23 AM

Re: C6 problem! - Stuart Anderson on Sep 1, 2008, 8:04 AM

Re: C6 problem! - fmerkl on Sep 1, 2008, 8:43 AM

Can it be seals? - allenman on Sep 1, 2008, 6:59 PM

Re: Can it be seals? - Anonymous on Sep 2, 2008, 3:58 AM

late shifts... still... View Entire Thread - carlosmaurixio on Aug 30, 2008, 6:03 PM

Re: late shifts... still... - Stuart Anderson on Aug 30, 2008, 11:12 PM

Re: late shifts... still... - carlosmaurixio on Aug 31, 2008, 1:23 AM

Re: late shifts... still... - Stuart Anderson on Aug 31, 2008, 10:28 AM

filter? - carlosmaurixio on Aug 31, 2008, 12:19 PM

If - Stuart Anderson on Aug 31, 2008, 1:20 PM

safe to drive? - carlosmaurixio on Aug 31, 2008, 1:34 PM

safe to drive??? - carlosmaurixio on Sep 1, 2008, 7:54 PM

Shift Pattern View Entire Thread - Brandon on Aug 31, 2008, 1:49 PM

Re: Shift Pattern - allenman on Aug 31, 2008, 7:13 PM

Re: Shift Pattern - Paul on Aug 31, 2008, 11:07 PM

Automatic Transmisson not going into 3rd gear View Entire Thread - Jon on Aug 26, 2008, 9:50 PM

Re: Automatic Transmisson not going into 3rd gear - Stuart Anderson on Aug 26, 2008, 11:45 PM

Tried that - Jon on Aug 27, 2008, 5:43 AM

Re: Tried that - Stuart Anderson on Aug 27, 2008, 8:35 AM

just so we are all on the same page... - carlosmaurixio on Aug 27, 2008, 11:20 AM

Hey carlos. - Stuart Anderson on Aug 27, 2008, 11:29 AM

hmmm... - carlosmaurixio on Aug 27, 2008, 6:35 PM

Just to make sure - Jon on Aug 27, 2008, 9:42 PM

Rain Delay - Jon on Aug 28, 2008, 4:41 PM

I have a couple ?'s - Scott on Aug 28, 2008, 9:44 PM

Not sure - Jon on Aug 28, 2008, 9:49 PM

Rain Delay Over - Jon on Aug 29, 2008, 6:24 PM

Why not - Jon on Aug 29, 2008, 6:54 PM

Re: Rain Delay Over - Stuart Anderson on Aug 29, 2008, 6:59 PM

Re: Rain Delay Over - carlosmaurixio on Aug 29, 2008, 7:27 PM

Tach - Jon on Aug 29, 2008, 8:54 PM

Re: Tach - carlosmaurixio on Aug 30, 2008, 4:54 AM

Meter - Jon on Aug 30, 2008, 8:46 AM

No Mo - Jon on Aug 29, 2008, 8:34 PM

Re: No Mo - Jon on Aug 31, 2008, 11:59 AM

Re: No Mo - carlosmaurixio on Aug 31, 2008, 12:17 PM

Fixed - Jon on Aug 31, 2008, 8:30 PM

To much Fluid - Jon on Aug 30, 2008, 8:16 PM

only forward gears View Entire Thread - Anonymous on Aug 29, 2008, 12:45 AM

Re: only forward gears - Paul on Aug 29, 2008, 12:53 AM

think it - Anonymous on Aug 29, 2008, 1:39 PM

Re: think it - fmerkl on Aug 29, 2008, 2:10 PM

Re: think it - Carlosmaurixio on Aug 29, 2008, 2:49 PM

Even on reverse it goes forward? - Anonymous on Aug 30, 2008, 3:52 PM

Re: Even on reverse it goes forward? - carlosmaurixio on Aug 30, 2008, 4:53 PM

Re: Even on reverse it goes forward? - Anonymous on Aug 30, 2008, 5:17 PM

Necessary kickdown? View Entire Thread - Anonymous on Aug 30, 2008, 8:31 AM

Re: Necessary kickdown? - fmerkl on Aug 30, 2008, 8:51 AM

Re: Necessary kickdown? - Anonymous on Aug 30, 2008, 4:48 PM

1993 FORD RANGER TRANNY View Entire Thread - skippy on Aug 30, 2008, 9:19 AM

c-6 up-chuck View Entire Thread - mike on Aug 26, 2008, 11:58 PM

Re: c-6 up-chuck - Paul on Aug 27, 2008, 4:07 AM

Re: c-6 up-chuck - mike on Aug 27, 2008, 7:48 PM

Re: c-6 up-chuck - Anonymous on Aug 27, 2008, 9:19 PM

Re: c-6 up-chuck - Paul on Aug 29, 2008, 1:07 AM

Re: c-6 up-chuck - carlosmaurixio on Aug 29, 2008, 2:05 AM

Re: c-6 up-chuck - mike on Aug 29, 2008, 4:48 PM

Re: c-6 up-chuck - carlosmaurixio on Aug 29, 2008, 5:30 PM

Re: c-6 up-chuck - mike on Aug 29, 2008, 9:01 PM

Re: c-6 up-chuck - Paul on Aug 29, 2008, 11:49 PM

c-4 rebuild question View Entire Thread - shawn on Aug 28, 2008, 8:44 PM

Re: c-4 rebuild question - Stuart Anderson on Aug 29, 2008, 12:26 AM

Oil pump parts for 69 FMX needed View Entire Thread - CandyApple on Aug 28, 2008, 5:38 AM

Here - Stuart Anderson on Aug 28, 2008, 8:57 AM

Re: Here - CandyApple on Aug 28, 2008, 9:34 AM

If you can keep a secret - allenman on Aug 28, 2008, 6:40 PM

Leaking Shifter Shaft FMX - Help View Entire Thread - Bob on Aug 27, 2008, 9:29 PM

yup - Stuart Anderson on Aug 28, 2008, 8:56 AM

transmission is repsonding well... part two. View Entire Thread - carlosmaurixio on Aug 22, 2008, 1:30 AM

update... I think vacuum mod. is bad. - carlosmaurixio on Aug 23, 2008, 5:55 PM

Shifting - Gregaust on Aug 24, 2008, 12:26 AM

Re: Shifting - carlosmaurixio on Aug 24, 2008, 12:40 AM

Re: Shifting - Carlosmaurixio on Aug 24, 2008, 5:40 PM

Re: Shifting - Stuart Anderson on Aug 24, 2008, 6:57 PM

Re: Shifting - carlosmaurixio on Aug 24, 2008, 11:02 PM

Re: Shifting - Stuart Anderson on Aug 24, 2008, 11:13 PM

Re: Shifting - carlosmaurixio on Aug 25, 2008, 12:39 AM

What vacuum modulator? Green, black, yellow stripe? - carlosmaurixio on Aug 25, 2008, 6:24 PM

Modulator line - Scott on Aug 25, 2008, 10:01 PM

Re: What vacuum modulator? Green, black, yellow stripe? - Stuart Anderson on Aug 25, 2008, 10:43 PM

Re: What vacuum modulator? Green, black, yellow stripe? - carlosmaurixio on Aug 25, 2008, 11:33 PM

Modulators - Gregaust on Aug 26, 2008, 12:26 AM

Re: Modulators - carlosmaurixio on Aug 26, 2008, 12:41 AM

Re: Modulators - Stuart Anderson on Aug 26, 2008, 12:43 AM

Re: Modulators - carlosmaurixio on Aug 26, 2008, 1:22 AM

Re: Modulators - Gregaust on Aug 26, 2008, 4:37 AM

valve - Stuart Anderson on Aug 26, 2008, 8:50 AM

Re: valve - Anonymous on Aug 26, 2008, 12:01 PM

Re: valve - Paul on Aug 27, 2008, 4:20 AM

transmission is responding well, a little hesitation though... View Entire Thread - carlosmaurixio on Aug 21, 2008, 7:51 PM

Re: transmission is responding well, a little hesitation though... - Stuart Anderson on Aug 21, 2008, 7:57 PM

not responding... - Troy on Aug 21, 2008, 9:36 PM

Re: not responding... - Stuart Anderson on Aug 21, 2008, 9:53 PM

Later Dude........ - Doug Bender on Aug 24, 2008, 8:56 PM

Re: Later Dude........ - Stuart Anderson on Aug 24, 2008, 10:23 PM

Thread unlocked - Doug Bender on Aug 26, 2008, 7:12 AM

Thanks - Stuart Anderson on Aug 26, 2008, 8:51 AM

C 6 forward plate in Direct View Entire Thread - Scott on Aug 24, 2008, 8:00 AM

Re: C 6 forward plate in Direct - Stuart Anderson on Aug 24, 2008, 10:25 PM

FMX to C6 swap View Entire Thread - ben_979 on Jun 30, 2008, 8:24 PM

Re: FMX to C6 swap - Stuart Anderson on Jun 30, 2008, 10:39 PM

Re: FMX to C6 swap - ben_979 on Jul 2, 2008, 12:37 PM

Re: FMX to C6 swap - Stuart Anderson on Jul 2, 2008, 9:46 PM

How about an AOD? - Mark on Jul 3, 2008, 9:58 PM

I did the same thing with a FMX - redmach on Jul 4, 2008, 7:18 PM

I did the same thing with my FMX - Jason Bressler on Jul 8, 2008, 2:02 AM

Re: I did the same thing with my FMX - ben_979 on Jul 9, 2008, 11:36 AM

Re: I did the same thing with my FMX - tim on Jul 10, 2008, 10:32 AM

Trans swap - tim on Jul 10, 2008, 10:52 AM

sorry I ment to say..... - tim on Jul 10, 2008, 11:16 AM

Update - swap complete - ben_979 on Aug 24, 2008, 2:15 AM

Re: Update - swap complete - Anonymous on Aug 24, 2008, 12:51 PM

C6 build up for 700 Horsepower. View Entire Thread - Knotwall on Aug 21, 2008, 2:57 PM

www.460ford.com - Gregaust on Aug 21, 2008, 4:49 PM

Not hard - allenman on Aug 22, 2008, 1:27 AM

Thanks - Knotwall on Aug 24, 2008, 9:55 AM

c4 bell housing View Entire Thread - randy on Jul 16, 2008, 5:09 PM

c4 bellhousing - mikecamera on Aug 23, 2008, 7:38 PM

What is the reason for a Gopher catcher, or View Entire Thread - wayne on Aug 22, 2008, 3:31 PM

Re: What is the reason for a Gopher catcher, or - Stuart Anderson on Aug 22, 2008, 6:08 PM

Falcon/Comet Toploader View Entire Thread - Glenn on Sep 19, 2007, 9:58 AM

Re: Falcon/Comet Toploader - Stuart Anderson on Sep 19, 2007, 10:55 AM

Re: Falcon/Comet Toploader - Anonymous on Aug 22, 2008, 5:52 PM

pros and cons to c6 View Entire Thread - Andy on Aug 22, 2008, 9:25 AM

Re: pros and cons to c6 - Stuart Anderson on Aug 22, 2008, 9:36 AM

Re: pros and cons to c6 - Andy on Aug 22, 2008, 9:51 AM

HP tests - allenman on Aug 22, 2008, 1:47 PM

E4OD Problems - Help! View Entire Thread - Bob on Aug 14, 2008, 2:22 PM

Re: E4OD Problems - Help! - GypsyR on Aug 15, 2008, 10:30 PM

Re: E4OD Problems - Help! - carlosmaurixio on Aug 17, 2008, 12:09 AM

Re: E4OD Problems - Help! - GypsyR on Aug 21, 2008, 11:20 PM

Re: E4OD Problems - Help! - carlosmaurixio on Aug 22, 2008, 1:21 AM

Respectful to others View Entire Thread - Doug Bender on Aug 19, 2008, 6:59 AM

Re: Respectful to others - 86GT on Aug 19, 2008, 10:43 AM

respectful to others??.what about respectful to NEW users!!! - Kouper on Aug 20, 2008, 6:17 PM

top 3 best c 6 transbrakes View Entire Thread - mark on Aug 18, 2008, 3:28 PM

Re: top 3 best c 6 transbrakes - fmerkl on Aug 19, 2008, 10:16 AM

thanks for response - mark on Aug 20, 2008, 3:19 PM

FMX transmission schematic View Entire Thread - CandyApple on Aug 18, 2008, 3:04 PM

Re: FMX transmission schematic - Silverfox on Aug 18, 2008, 3:30 PM

Re: FMX transmission schematic - Paul on Aug 19, 2008, 3:10 AM

Re: FMX transmission schematic - Silverfox on Aug 19, 2008, 11:32 AM

Re: FMX transmission schematic - CandyApple on Aug 19, 2008, 2:39 PM

ASTG and Shop Manual - allenman on Aug 20, 2008, 12:23 AM

FLAMING View Entire Thread - Stuart Anderson on Aug 19, 2008, 2:22 PM

Re: FLAMING - carlosmaurixio on Aug 19, 2008, 2:33 PM

Re: FLAMING - Stuart Anderson on Aug 19, 2008, 7:37 PM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Next >>

Click logo to enter advertiser sites