| 390 4V manifoldDecember 9 2008 at 10:51 AM | nick (Login americangrefeti)
Members | |
| i was cleaning an FE 390 4V manifold today and i couldn't figure out how to clean behind the "pan" on the underside of the manifold. is there a way to take it off without destroying it?
it is riveted on so i know there would be some drilling involved, but before i got into it i wanted to make sure if i could replace it or if there was another way to clean all the crap from behind it.
thanks
|
| Responses- Hammer and chisel - paul metzgar on Dec 9, 2008, 11:10 AM
- Gently tapping a sharp chisel under the rivet heads will extract w/o breaking. - Dave Eames on Dec 9, 2008, 11:34 AM
- what is a better fix, rivets or to tap it out? - nick on Dec 9, 2008, 12:42 PM
- Try this - John on Dec 9, 2008, 2:58 PM
- Re: 390 4V manifold - Don W on Dec 9, 2008, 3:10 PM
|
|
|
