(Login ZergOvermind) from IP address 71.96.94.152 Verizon Internet Services Carrollton, Texas United States
Once again I am having problems posting to a Network 54 forum. One minute I had no trouble, the next minute I cannot post anything. Preview works fine, but when I click on the "Post" button, nothing happens; the preview remains on the screen but nothing gets posted to the forum.
Go to that page, then open the forum frame in a new window, without the other site involved. See if you can post now... If you can, it's their frames page that is causing the problem.
AnitaS (Premier Login AnitaS) N54 Volunteer Moderator
Empty field (M)
No score for this post
March 18 2008, 7:09 PM
Is it possible that when the post doesn't go through that you have left the "Message Text" box empty? They supposedly changed it (a couple of years ago perhaps?) so that you could leave this box blank, but I still can not. I experience exactly what you just described. I've seen some of my users post messages with this field empty, but I have never been able to.
Scoring disabled. You must be logged in to score posts.
(Login laceejewelrydesigns) 76.221.176.132 SBC Internet Services San Diego, CA United States
Help! Can't find where to post.
No score for this post
March 22 2008, 11:27 AM
I'm totally lost, I guess. I created an account. I added a link to the forum page (I thought) from my website, but no area to 'write' to the forum comes up. Plus, I've looked all over and can not find anyplace or anyway to post, except by responding to someone else's original message. A little help, please.
Scoring disabled. You must be logged in to score posts.
(Login laceejewelrydesigns) 76.212.169.16 SBC Internet Services San Diego, CA United States
Totally Lost-Still
No score for this post
March 26 2008, 5:55 PM
Ripper, I tried going to the link you previously gave me in reply to my first "Help" message, it said "Security violation. That resource does not belong to you. This access has been noted and sent to our security team."
The address was: http://www.network54.com/My_Account/Forums/Edit/Options?forumid
In your message you gave me that same address with 6 pound signs (######) after the word 'forumid'.
(http://www.network54.com/My_Account/Forums/Edit/Options?forumid=######)
You said, "replace ###### with your forum's ID". I tried typing in the equal sign and my login name. It, again, went to the 'Security violation' page.
Is the problem that I don't really know what to put in place of those pound (#) signs. Or, am I just totally lost? I've never found any place that says "Button Labels" either. Terribly sorry to be such an ignoramus, but would you try to help me through this again. Regards, Mary Ann
Scoring disabled. You must be logged in to score posts.
Replace the 188001 with your forum id, BEFORE hitting return or Go in your browser. If you are logged in, it will take you to the page to edit your forum. Click on "Options", then follow the rest.
You created a group, not a forum, which is the issue here. You need to create a forum. You may then link your group to it via access control permissions.
The best place for you to start would be with these tutorials:
