Xweb Discussion Forum

Xweb is maintained by volunteers and donations
If you wish to help please click 'Donate' button

Xweb 101
Best of ...

---------- Please use these navigation links to select the appropriate forum for your topic. Misplaced posts may be moved.----------

Xweb - The Internet's global forum for enthusiasts of the Fiat Bertone X1/9 - Hosted by X1/9 Automobili North America
You are in the Discussion Forum - The place for tech advice, events, talk related to the X1/9

Xweb 2.0 testing has resumed online at http://www.xwebforums.org

Start new topic in: X1/9 Discussion / For Sale & Wanted / Not BS (Off topic) Forum
Search in: X1/9 Discussion / For Sale & Wanted / Not BS (Off topic) Forum

- Events Calendar | X Registry | User Map -

~ Xweb 1.0 is partially closed - Only the Chat area is currently still ~
~ in use. Please visit Xweb 2.0 for live DF, FS&W & NBS forums ~

Chat!

Can we have some quiet here? Please

- Herzel Frenkel on Apr 26, 2008

My 2� - Gregory Smith on Apr 27, 2008

As Gregory said, and some other thoughts.... - Steve K on Apr 27, 2008

Re: As Gregory said, and some other thoughts.... - cesare on Apr 27, 2008

Is this too my Dynomat? - RMMJ on Apr 27, 2008

Looks good to me...... - Steve K on Apr 27, 2008

Where's my songbird? - Bob Brown on Apr 27, 2008

We are all such tweakers - DougESmith on Apr 27, 2008

Those are excellent Photos Doug. Thanks for sharing. <nt> - Bob Brown on Apr 27, 2008

There is also... - Pat Higginbotham on Apr 27, 2008

Another possible cause............... - Dave Potts on Apr 27, 2008

Delrin Bushings - DougESmith on Apr 27, 2008

Wow, what a load of information - Herzel Frenkel on Apr 27, 2008

A little more progress & pics - exhaust is in

- Damonfg on Apr 26, 2008

oops - here are the pics - Damonfg on Apr 26, 2008

Mmmmmmmmmmmmm.... that is pretty! - RMMJ on Apr 26, 2008

I like it so much that you should make me one. - Bob Beaudet on Apr 26, 2008

Re: I like it so much that you should make me one. - Damonfg on Apr 26, 2008

Yes I did - RMMJ on Apr 27, 2008

Is it true that... - Jim W. on Apr 27, 2008

That's what the man at the garage said. - Bob Beaudet on Apr 27, 2008

Heard that today also - Damonfg on Apr 27, 2008

Missouri started this last year - jd on Apr 27, 2008

Is that a "flexible" tube section there?..... - Albert on Apr 27, 2008

Yes, it's a quite flexable bellows section. - Damonfg on Apr 27, 2008

the cat is hot.. - Myron Samila on Apr 28, 2008

Need Brake line help

- DougESmith on Apr 26, 2008

Re: Need Brake line help - Dan Sarandrea (Phila) on Apr 26, 2008

I think it is the other way around :) - DougESmith on Apr 26, 2008

found this info.......... - Kevin Cozzo on Apr 26, 2008

Shameless plug - Matt Brannon - Midwest-X19.com on Apr 26, 2008

Coolant leak

- Daniel on Apr 26, 2008

Belt tensioner plate or - DougESmith on Apr 26, 2008

Coolant leak - Herzel Frenkel on Apr 26, 2008

Re: Coolant leak - Steve Hoelscher (St. Augustine, Florida) on Apr 27, 2008

What do I miss MOST about my X?

- Thomas on Apr 26, 2008

But Thomas, you're not X-less yet!... - Bob Brown on Apr 26, 2008

I feel your Pain - JJ on Apr 26, 2008

Guys like you ... - Jeebus on Apr 26, 2008

Uhhh - JJ on Apr 26, 2008

:) - jd on Apr 26, 2008

JJ in position... - Bob Brown on Apr 27, 2008

I hope you someday get to enjoy an experience like JJ's - d on Apr 26, 2008

Grow up, "Jeebus", or whoever you might be... - Thomas on Apr 27, 2008

Who might you be? - RMMJ on Apr 27, 2008

Re: What do I miss MOST about my X? - Tiff on Apr 26, 2008

It's amazing how dirt cheap they are... - Thomas on Apr 26, 2008

Re: It's amazing how dirt cheap they are... - Tiff on Apr 26, 2008

My A.D.D. won't allow for that! - Thomas on Apr 26, 2008

... shaguar - wombat on Apr 26, 2008

I had a 94 XJ6 sedan... - Thomas on Apr 26, 2008

... 308GT4 for sale - wombat on Apr 26, 2008

Good point... - Thomas on Apr 27, 2008

Im going to buy a fleet of Collector cars - JJ on Apr 27, 2008

JJ, I am apparently not a Car Guy, but... - Thomas on Apr 27, 2008

Nice Collection - JJ on Apr 27, 2008

Find a good X, - Bernice on Apr 27, 2008

A Little Reassuring... - Joe Forlizzi on Apr 28, 2008

Ferrari vs X - Larry Ham on Apr 28, 2008

Loose end.. literally.

- Daz on Apr 26, 2008

The first red wire - Eric Hamilton (Durham NC) on Apr 26, 2008

wire - Daz on Apr 26, 2008

Wire help - Gregory Smith on Apr 26, 2008

damn wire - Daz on Apr 26, 2008

Autochoke wire - Tiff on Apr 26, 2008

wire - Daz on Apr 26, 2008

Re: wire - tiff on Apr 26, 2008

daz, you need another - greg silver on Apr 26, 2008

clip - Daz on Apr 27, 2008

Another tricky hose clamp is...............! - Ian Lawson (NZ) on Apr 27, 2008

some more progress pictures

- Thai on Apr 25, 2008

Guess you will not be going on the road today...... - Bobr on Apr 26, 2008

well took it out on the road today - Thai on Apr 26, 2008

Want to try the front sway bar. Should take 10 min to bolt on.. - Bobr on Apr 26, 2008

hmm - Thai on Apr 26, 2008

Nope bolts right on..... - Bobr on Apr 26, 2008

hmm - Thai on Apr 26, 2008

You might be surprised, Thai - Colin Duckworth on Apr 27, 2008

Re: well took it out on the road today - Brad Garska on Apr 26, 2008

Er . . . just to clarify a bit . . . - Colin Duckworth on Apr 27, 2008

Re: Er . . . just to clarify a bit . . . - Brad Garska on Apr 28, 2008

something to think about - kevin cozzo on Apr 27, 2008

If they're the ADDCO ones . . . - Colin Duckworth on Apr 27, 2008

they were marked... - Thai on Apr 27, 2008

May have mis-understood - Colin Duckworth on Apr 27, 2008

Thai . . . at a rough calculation . . . - Colin Duckworth on Apr 28, 2008

hmm im not sure about taht - Thai on Apr 28, 2008

Yeah but . . . - Colin Duckworth on Apr 28, 2008

did a quickie measurement - Thai on Apr 29, 2008

OK . . . so . . . - Colin Duckworth on Apr 29, 2008

ill see what i can come up with - Thai on Apr 29, 2008

found the spring index for my mystery springs - Thai on May 1, 2008

Vick's Autosports rave (and concerns)

- kevin cozzo on Apr 25, 2008

Vicks works for me - Ed on Apr 25, 2008

matt - reyy on Apr 25, 2008

I email Matt... - chris on Apr 25, 2008

that is funny reyy - RMMJ on Apr 25, 2008

As long Csaba istays at Vicks,i think theres nothing to worry about... - Albert on Apr 25, 2008

along time ago. - reyy on Apr 25, 2008

I talk with Matt all of the time...He always seems to be at his shop - Thomas on Apr 26, 2008

Matt is Great ... - Jeff Ballard on Apr 25, 2008

Vicks! Csaba always pulls through.. - Myron Samila on Apr 26, 2008

I like Matt too.... - Kevin Cozzo on Apr 25, 2008

Mad Matt - Jack Kulik on Apr 26, 2008

Bayless on the other hand... - Thomas on Apr 26, 2008

I just got a pile of parts from Bayless - DougESmith on Apr 26, 2008

Hey Thomas! - Stockton Brad on Apr 26, 2008

Oh yeah....And how about the girls with their 80's hair... - Thomas on Apr 26, 2008

Re: Vick's Autosports rave (and concerns) - Denise on Apr 26, 2008

Two points about Vicks - Pete Whitstone on Apr 26, 2008

I didn't know about the service department - Denise on Apr 26, 2008

Perhaps the best strategy is - Stockton Brad on Apr 26, 2008

I have been in contact with Robert Vick for the past few weeks- - greg silver on Apr 26, 2008

Ahmen to that! - Austin Johnson on Apr 27, 2008

Dropping several drive-trains this weekend....

- Steve K on Apr 25, 2008

hmmm - Thai on Apr 25, 2008

I would do lots of tests... - Alex Eddington on Apr 25, 2008

radiator fan mod

- reyy on Apr 25, 2008

Alfa Romeo 33 a/c fan..... - Andrew Coles on Apr 25, 2008

there's an old post with pics back a few pages - classicalgas on Apr 25, 2008

Fan.. - Daz on Apr 26, 2008

anyone know if Mario Ricambi is still in business?

- John on Apr 25, 2008

here's a link - rick on Apr 25, 2008

Car still running hot

- Todd on Apr 25, 2008

Hot - Steve Hoelscher (St. Augustine, FL) on Apr 25, 2008

Is it the correct overflow cap? - Thomas on Apr 25, 2008

The cap is a 13 lb cap I got at autozone. - Todd on Apr 25, 2008

MATE! - Neilium on Apr 25, 2008

There's your problem! - Kevin B (Asheville, NC) on Apr 25, 2008

I will order on Monday. NT - Todd on Apr 26, 2008

Is there a correct Stant cap? - Steven Lawson on Apr 28, 2008

As far as I know, no. - Kevin B (Asheville, NC) on Apr 29, 2008

Temperature creeps up - Todd on Apr 25, 2008

Re: Temperature creeps up - Steve Hoelscher (St. Augustine, FL) on Apr 25, 2008

Okay some more facts - Todd on Apr 25, 2008

Use Stant 45378 (180 degree) nt - Robert Mose on Apr 25, 2008

Yes, that's the one - RMMJ on Apr 25, 2008

Lots of questions... - Paul Valente on Apr 26, 2008

answers - Todd on Apr 26, 2008

Diagnosis - Paul Valente on Apr 26, 2008

Small Coolant Leaks - Bernice on Apr 27, 2008

Quick question - Ed on Apr 25, 2008

Basically, no... forcing water in through the flush Tee should force the air... - Tony Natoli, SoCal on Apr 25, 2008

Remove the top one? - Ed on Apr 25, 2008

Do you guys use hose water to fill your radiators? - Erwin Timmers on Apr 26, 2008

The modern coolants (Prestone, etc) - jd on Apr 26, 2008

water pump or air in the system.. - Ricardo on Apr 25, 2008

Car still running hot - Ed DeCarbo on Apr 25, 2008

A long shot, but...... - Steve K on Apr 25, 2008

I had the fan backwards a couple of years ago, but it is right now NT - Todd on Apr 25, 2008

Todd... sorry for your trouble... but I have even more work for you... - Tony Natoli, SoCal on Apr 25, 2008

Re: Todd... sorry for your trouble... but I have even more work for you... - Peter R on Apr 25, 2008

From another '87 owner... - Gregory Smith on Apr 26, 2008

Drove 450 miles on Sunday - Todd on Apr 28, 2008

Is it fixed? - Gregory Smith on Apr 28, 2008

Fuel Injection Fan/Blower

- Art Akard on Apr 25, 2008

Yep - Steve Hoelscher (St. Augustine, FL) on Apr 25, 2008

Thank you very much - Art Akard on Apr 25, 2008

Just what I said... just like a carb fan... BUT...I was recently corrected by... - Tony Natoli, SoCal on Apr 25, 2008

fan only comes on when the engine is off... relay logic prevents it from running while.. - Myron Samila on Apr 26, 2008

Help/advice/pics wanted...

- Daz on Apr 25, 2008

Hey Daz... long time no see... - Tony Natoli, SoCal on Apr 25, 2008

Cheers - Daz on Apr 25, 2008

82 FI Will not run

- Bob grasch on Apr 25, 2008

Re: 82 FI Will not run - Allen Mandlebaum on Apr 25, 2008

How, exactly, does it die ? - Damonfg on Apr 25, 2008

It sputters - Bob Grasch on Apr 25, 2008

next time it dies - Damonfg on Apr 25, 2008

Fuel pump not running - Bob Grasch on Apr 25, 2008

AFM - Bob Grasch on Apr 25, 2008

Air leak? - Steven Lawson on Apr 25, 2008

Key On? - Jeff Ballard on Apr 25, 2008

Fuel pump - Bob Grasch on Apr 25, 2008

I Think You're Looking in the Right Area .. - Jeff Ballard on Apr 25, 2008

Before you do as BOB BROWN suggests.. try this first... - Tony Natoli, SoCal on Apr 25, 2008

Contacts Look OK - Bob Grasch on Apr 25, 2008

Bob... sorry if I got confused about Bob Brown... - Tony Natoli, SoCal on Apr 28, 2008

I'm trying REAL HARD to find my suggestion, but I cannot!... - Bob Brown on Apr 25, 2008

Coil Connections - Bob Grasch on Apr 25, 2008

Your connections to the coil are correct. - Bob Brown on Apr 25, 2008

Another thing to observe ... - Jeff Ballard on Apr 25, 2008

Probably fuel.... - Matt Brannon - Midwest-X19.com on Apr 25, 2008

Fuel - Bob Grasch on Apr 25, 2008

Success!! Thanks for the help. - Bob Grasch on Apr 26, 2008

Can you be specific about exactly which wires were causing problems? - Matt Brannon - Midwest-X19.com on Apr 26, 2008

Bad Wires - Bob Grasch on Apr 26, 2008

cooling system bleeding

- eric schneider on Apr 25, 2008

Coolant bleeders,,, - Jim young N.B. Canada on Apr 27, 2008

New X1/9 SCCA Road Racing Classifications.....

- Matt Brannon - Midwest-X19.com on Apr 25, 2008

Re: New X1/9 SCCA Road Racing Classifications..... - Vincent Komara on Apr 25, 2008

The H-Production classifications I think are the most likely.... - Matt Brannon - Midwest-X19.com on Apr 25, 2008

I'm glad someone is able to get a classing change through..... - Kevin B (Asheville, NC) on Apr 25, 2008

Re: New X1/9 SCCA Road Racing Classifications..... - Cesare on Apr 25, 2008

Hope so! - Matt Brannon - Midwest X1/9 on Apr 26, 2008

Don't forget GT-Lite as an option - Steven Shonk on Apr 26, 2008

Vintage Racers - Bernice on Apr 27, 2008

FEN all-Italian car show sunday

- Gregory Smith on Apr 25, 2008

See You Tomorrow - Jeff in Gig Harbor on Apr 26, 2008

Another trophy? - Gregory Smith on Apr 26, 2008

X1/9s upstaged at local show! - Gregory Smith on Apr 28, 2008

more progress

- Thai on Apr 24, 2008

uh, is that all we get? lol................... - kevin cozzo on Apr 24, 2008

Go go go... NT - Herzel Frenkel on Apr 25, 2008

Couple of questions... - Pete Whitstone on Apr 25, 2008

few answers - Thai on Apr 25, 2008

Hope you get them in and dialed in by the 3rd....... - Bobr on Apr 25, 2008

what dialing? - Thai on Apr 25, 2008

Anyone have phone # for Tommy in Arizona?

- MikeMittelstead/Oregon on Apr 24, 2008

try this, heh - jake on Apr 24, 2008

Thx Jake and JD... - MikeMittelstead/Oregon on Apr 24, 2008

couple of questions !!! ???

- George(Cyprus) on Apr 24, 2008

OH NO... George... - Tony Natoli, SoCal on Apr 24, 2008

A surprize, or am I wrong - Herzel Frenkel on Apr 25, 2008

Hmmm... I dunno... But it doesn't change the bottom line... - Tony Natoli, SoCal on Apr 25, 2008

Acknowledged, but the Trons have no washers. <nt> - Bob Brown on Apr 25, 2008

photos will have to wait for a bit...photobucker not working at the moment... - George(Cyprus) on Apr 25, 2008

PHOTOS are here !!!! - George(Cyprus) on Apr 25, 2008

Looks good to go. - RMMJ on Apr 25, 2008

Not that I profess to be all that knowledgeable... - Phil_UK on Apr 25, 2008

The pics are gone, but more info here - RMMJ on Apr 25, 2008

Re: PHOTOS are here !!!! - Dan Sarandrea (Phila) on Apr 25, 2008

How do i search for "completed auctions" on Ebay???!!!

- Albert on Apr 24, 2008

probably not possible - d on Apr 24, 2008

Click Advanced Search... - Andrew Patterson on Apr 24, 2008

This is as close as you can get...... - Duane K Estill (Corinth, Mississippi) on Apr 24, 2008

Re: How do i search for "completed auctions" on Ebay???!!! - Dan Sarandrea (Phila) on Apr 24, 2008

good suggestion...that would be Dierk.. - d on Apr 25, 2008

re ebay - Neilium on Apr 24, 2008

Simple - Bobr on Apr 24, 2008

Re - Neilium on Apr 25, 2008

My daily driver so far (pics)

- Roger on Apr 24, 2008

Thanks for sharing Rodger - Bernice on Apr 24, 2008

Ok, what is the deal with Surge Tanks? - Eric Armstrong on Apr 24, 2008

Re: Ok, what is the deal with Surge Tanks? - Dan Sarandrea (Phila) on Apr 24, 2008

Ah.... My mistake then. - Eric Armstrong - Oregon on Apr 25, 2008

re pcs - Neilium on Apr 24, 2008

oops - Neilium on Apr 24, 2008

HA! What a HAM you are... you just LOVE your car! nt - Tony Natoli, SoCal on Apr 24, 2008

Roger... what a great color... great work also... - Tony Natoli, SoCal on Apr 24, 2008

How love to share a project - Herzel Frenkel on Apr 25, 2008

Brakes, do any other fiat ones bolt right on

- Roger on Apr 24, 2008

Not quite bolt on... - Jason Greenwood on Apr 24, 2008

Uno Turbo and I suspect others too - Bernice on Apr 24, 2008

Bernice will these clear 13" wheels? - Dean Rees on Apr 24, 2008

Uno Turbo has 13" wheels... - Rachael on Apr 24, 2008

not so clear cut - Julian on Apr 25, 2008

What's the deal with brakes? - Neilium on Apr 24, 2008

Roger... I tend to agree with Neilium... - Tony Natoli, SoCal on Apr 24, 2008

re brakes - Neilium on Apr 25, 2008

Standard calipers etc - Mickey on Apr 25, 2008

fiAT X1/9 ENGINE

- shaun on Apr 24, 2008

yeah mate - Neilium on Apr 24, 2008

or to make it easier... - Roger on Apr 24, 2008

re the lift - Neilium on Apr 24, 2008

mines been u pon stands for a while now - Roger on Apr 24, 2008

re and hey i got a pic next to my name - Neilium on Apr 24, 2008

Drivetrain drops out the bottom of the X - Bernice on Apr 24, 2008

Oil Pressure Switch... in the ditch?

- Neilium on Apr 23, 2008

oil pressure sensor - jake on Apr 23, 2008

re - Neilium on Apr 23, 2008

oil sender - Peter R (Aus) on Apr 24, 2008

re - Neilium on Apr 24, 2008

Re: re - Peter R (Aus) on Apr 24, 2008

re re re re re - Neilium on Apr 24, 2008

for 1300 sounds like the wrong one - jake on Apr 24, 2008

the saga continues,

- reyy on Apr 23, 2008

My son lost the left front on White Fang at 70 mph... - Tony Natoli, SoCal on Apr 23, 2008

hehe -- BTDT - John Rucker on Apr 24, 2008

Nice to see you are still around, John! - Thomas on Apr 24, 2008

LOL, all too familiar - Mike S. on Apr 24, 2008

I have never done that!!! - jd on Apr 24, 2008

been there - Rob V on Apr 25, 2008

whats an omp stud - reyy on Apr 25, 2008

Just getting one click...

- Greg (in Conn) on Apr 23, 2008

Yep, check yer 2 grounds... - Bob Brown on Apr 23, 2008

Yeah both grounds are pure...Sanded off the minimal - Greg (in Conn) on Apr 23, 2008

Well Greg, the connection quality may not be the problem... - Bob Brown on Apr 23, 2008

Ok good point but the battery negative cable was replaced - Greg (in Conn) on Apr 23, 2008

Wide copper braid straps - Bernice on Apr 24, 2008

Check the Voltage on the starter terminal - Bernice on Apr 24, 2008

After trying Bob's suggestions - jd on Apr 23, 2008

Thanks JD... Your post below about jacks & stands... - Greg (in Conn) on Apr 23, 2008

Thanks Greg - jd on Apr 23, 2008

try this if you have long arms - Neilium on Apr 23, 2008

Greg... another tack you may choose... faster and cheaper and PROVES your componants... - Tony Natoli, SoCal on Apr 23, 2008

A few bucks Tony? - Neilium on Apr 23, 2008

Most of the time, the field windings and armature are OK... - Tony Natoli, SoCal on Apr 23, 2008

re - Neilium on Apr 24, 2008

Neilium... well... 24 volts will work anytime... for awhile! - Tony Natoli, SoCal on Apr 24, 2008

re, - Neilium on Apr 25, 2008

I believe I used a 1/2 drive ratchet, a 6 inch extention and a 14mm socket... - Tony Natoli, SoCal on Apr 25, 2008

Thanks for the plan of attack Tony... I'll start one by - Greg (in Conn) on Apr 24, 2008

all opinions wanted - should I change color???

- Andrew Coles on Apr 23, 2008

Go with what you like ! - Jeff on Apr 23, 2008

that's Angelo's stunning red X - d on Apr 24, 2008

I'm partial to the green.... - Mark Plaia, Springfield, OR on Apr 23, 2008

Do you know the... - Pat Higginbbotham on Apr 23, 2008

There is only one answer - RMMJ on Apr 23, 2008

There were two greens - Dan N. on Apr 23, 2008

what is chrome yellow? - reyy on Apr 23, 2008

Yellows - Dan N. on Apr 23, 2008

Another verde green one. - Paul Valente on Apr 24, 2008

Re: There were two greens - Dan Sarandrea (Phila) on Apr 24, 2008

mine is yellow 272, its not on the list? - reyy on Apr 24, 2008

Re: mine is yellow 272, its not on the list? - Dan Sarandrea (Phila) on Apr 24, 2008

That's a great looking X, Dan - Stockton Brad on Apr 24, 2008

Sorry Andrew... Opinions on colors are what I use as an argument... - Tony Natoli, SoCal on Apr 23, 2008

Red it will go faster nt. - Russell woodall on Apr 24, 2008

surely G R E E N !!!!!!! <nt> - George(Cyprus) on Apr 24, 2008

Green looks great on an X... - chris on Apr 25, 2008

1987 X 1/9 Transmission

- Allen Klokow on Apr 23, 2008

I would.... - Eric Armstrong on Apr 23, 2008

Good advice Eric - jd on Apr 23, 2008

Welcome to Xweb Allen - jd on Apr 23, 2008

Somebody FINALLY listened to me! - Thomas on Apr 23, 2008

Thanks for the welcome - al Klokow on Apr 23, 2008

Where in Illinois? - jd on Apr 23, 2008

Re: 1987 X 1/9 Transmission - Steve Hoelscher (Saint Augustine, Florida) on Apr 23, 2008

No 2nd & 5th - al Klokow on Apr 23, 2008

Welcome Al from SoCal also... I would also recommend... - Tony Natoli, SoCal on Apr 23, 2008

Re: No 2nd & 5th - Steve Hoelscher (St. Augustine, FL) on Apr 24, 2008

Plan 'B' - al Klokow on Apr 24, 2008

Re: Plan 'B' - Dan Sarandrea (Phila) on Apr 24, 2008

Thanks - al Klokow on Apr 24, 2008

Re: Thanks - Bob grasch on Apr 24, 2008

Thanks again - al Klokow on Apr 24, 2008

I am in St. Louis - jd on Apr 24, 2008

It's on the calendar - al Klokow on Apr 24, 2008

Open House - Bob Grasch on Apr 24, 2008

I will be passing thru Indy - jd on Apr 24, 2008

Don't leave home without it.... - Thomas on Apr 25, 2008

Paging Pete Whitstone

- Bobr on Apr 23, 2008

Hi Bob - Pete Whitstone on Apr 24, 2008

If you could write on the measurements.... - Bobr on Apr 24, 2008

Bob, email sent... <nt> - Pete Whitstone on Apr 25, 2008

What The Heck Are These Wires For?

- Dan Sarandrea (Phila) on Apr 23, 2008

Don't know what those are for, but they look factory..... - Mark Plaia, Springfield, OR on Apr 23, 2008

I Agree That.... - Dan Sarandrea (Phila) on Apr 23, 2008

Re: What The Heck Are These Wires For? - A P Silva on Apr 23, 2008

Resistor - Daz on Apr 23, 2008

On My Car..... - Dan Sarandrea (Phila) on Apr 23, 2008

I agree - Erwin Timmers on Apr 23, 2008

Could be... - Dan Sarandrea (Phila) on Apr 23, 2008

Re: What The Heck Are These Wires For? - Tiff on Apr 23, 2008

So All North American Cars... - Dan Sarandrea (Phila) on Apr 23, 2008

My 86 does <nt> - Andrew Patterson on Apr 23, 2008

AC blower control resistor, all 79-on cars - Matt Brannon - Midwest-X19.com on Apr 23, 2008

Re: AC blower control resistor, all 79-on cars - Dan Sarandrea (Phila) on Apr 23, 2008

Is that the drain hole in the bottom center. ???? If it is - Jim young N.B. Canada on Apr 23, 2008

Re: Is that the drain hole in the bottom center. ???? If it is - Dan Sarandrea (Phila) on Apr 23, 2008

Great Magazine Article...

- Mark Harris on Apr 23, 2008

See discussion below..nt - Bernice on Apr 23, 2008

See Bernice's post above... but thanks for sharing anyway! HA! nt - Tony Natoli, SoCal on Apr 23, 2008

Thanks! - Baxter on Apr 24, 2008

I thought the article was well written... - Thomas on Apr 24, 2008

uh huh - Neilium on Apr 24, 2008

Re: uh huh - Baxter on Apr 24, 2008

Free!!!!! - Neilium on Apr 25, 2008

Re: Free!!!!! - Baxter on Apr 25, 2008

Hey Baxter - Neilium on Apr 25, 2008

Re: Hey Baxter - Baxter on Apr 26, 2008

Re - neilium on Apr 26, 2008

Adjusting Dual 40's and Cam shims

- Daniel on Apr 23, 2008

Post your valve clearance and shim thickness and I'll do the math for you (nt) - Damonfg on Apr 23, 2008

Daniel, ship the carbs to me and I'll "adjust" them for ya... and... - Tony Natoli, SoCal on Apr 23, 2008

I can help on the carbs - Mike Richmond on Apr 23, 2008

Re: I can help on the carbs - martijn on Apr 23, 2008

what I need to know - Mike Richmond on Apr 23, 2008

Re: what I need to know - martijn on Apr 27, 2008

very good starting point - Mike Richmond on Apr 30, 2008

It's been almost 3 years, but...

- Mark Harris on Apr 22, 2008

Good to see you back here Mark - jd on Apr 22, 2008

Good to have you back Mark... - Tony Natoli, SoCal on Apr 23, 2008

great to have you back, Mark! Here's a source for you- - Greg Silver on Apr 23, 2008

Like 007 said - Herzel Frenkel on Apr 23, 2008

x dies in intersection- update

- reyy on Apr 22, 2008

Thanks for getting back to us... - Tony Natoli, SoCal on Apr 23, 2008

re - Neilium on Apr 25, 2008

I'm beginning to "wonder" about you... - Tony Natoli, SoCal on Apr 25, 2008

re - Neilium on Apr 25, 2008

Hmmmm... - Tony Natoli, SoCal on Apr 25, 2008

Here it is mate.... that lil bottle o nectar.. - Neilium on Apr 25, 2008

Neilium... I was intoxicated most of the weekend and then I come home to this! - Tony Natoli, SoCal on Apr 29, 2008

Oh Geez - Neilium on Apr 29, 2008

Re: Oh Geez - Tony Natoli, SoCal on Apr 29, 2008

it's pronunned - Neilium on Apr 30, 2008

Well... AFAIC I'd rather have Canadian instead... - Tony Natoli, SoCal on Apr 30, 2008

Arrrgghh ' warm beer?' - Neilium on May 1, 2008

Great news, Reyy - Stockton Brad on Apr 23, 2008

question ? - lezesig on Apr 23, 2008

All I can say - Stockton Brad on Apr 23, 2008

Coming to Northern Cal in my X

- RMMJ on Apr 22, 2008

Will send you an email - Bernice on Apr 23, 2008

Too bad that I will miss you!..... - Mark Plaia, Springfield, OR on Apr 23, 2008

Darn! - RMMJ on Apr 23, 2008

Hello Mark - Bernice on Apr 24, 2008

Dog Bone question

- Ricardo on Apr 22, 2008

thats nice, - reyy on Apr 22, 2008

Re: Dog Bone question - Steve Hoelscher on Apr 22, 2008

You mean you guys have xs that don't vibrate nt - rick on Apr 22, 2008

thats why they r x,s - reyy on Apr 22, 2008

Re: Dog Bone question - Mike S. on Apr 22, 2008

i like that - reyy on Apr 22, 2008

Re: Dog Bone question - Vincent Komara on Apr 23, 2008

the original is surprisingly heavy. I fabbed a new one from stainless tube - classicalgas on Apr 23, 2008

I kinda had the same thing Ricky... - Tony Natoli, SoCal on Apr 23, 2008

thanks Tony - Ricardo on Apr 23, 2008

Tried the "dog bone" - Bernice on Apr 23, 2008

Urethane bushes - hmmm... - Geoff from Aus on Apr 23, 2008

Solid dog bone - Daniel Forest on Apr 23, 2008

Oh No!! - Neilium on Apr 25, 2008

THANK YOU all for the kind thoughts and good wishes!

- Tony Natoli, SoCal on Apr 22, 2008

Bless me Papa Tony, for I have sinned.... - Bob Brown on Apr 22, 2008

HFB ya old fart! - Mike S. on Apr 22, 2008

Paps is now officially our "Geri-Xer"..<nt> - Duane K Estill (Corinth, Mississippi) on Apr 23, 2008

Does that mean - Bernice on Apr 23, 2008

Interesting product for body repair

- Gilles on Apr 22, 2008

WOW... (and yes, you should be working...) but... - Tony Natoli, SoCal on Apr 22, 2008

Can't be plated - Andrew Patterson on Apr 22, 2008

Andrew... What's this then... - Tony Natoli, SoCal on Apr 23, 2008

Hmm... - Andrew Patterson on Apr 23, 2008

HA! Me too! nt - Tony Natoli, SoCal on Apr 23, 2008

what's the fuss ? - Damonfg on Apr 22, 2008

Damon... - Tony Natoli, SoCal on Apr 23, 2008

Sounds like a can of JBWeld... Interesting though... <nt> - Eric Armstrong on Apr 22, 2008

Eric... Can JB Weld be CHROME plated??? nt - Tony Natoli, SoCal on Apr 23, 2008

I am not sure, but.... - Eric Armstrong on Apr 23, 2008

Well... I was thinking more or less about the old bumpers I useta mess with... - Tony Natoli, SoCal on Apr 23, 2008

sounds like devcon f asuminium putty - Neilium on Apr 23, 2008

centre console

- John on Apr 22, 2008

Use a dremel with a cutting wheel and... - Bob Brown on Apr 22, 2008

Some Pix of Brake Work, Rust Removal, and a Treat!

- Dan Sarandrea (Phila) on Apr 22, 2008

As a fiddler who messes with radio antennas, Dynamat installs and mirror replacements I am - Art Machado on Apr 22, 2008

I second Art's opinion... great work Dan... you must be YOUNG! nt - Tony Natoli, SoCal on Apr 22, 2008

You asked for it, - Herzel Frenkel on Apr 22, 2008

THANKS A LOT! And yes... yur right, they do! nt - Tony Natoli, SoCal on Apr 22, 2008

Ha! Had to see that one coming! - Chris in Alaska on Apr 22, 2008

Very Nice! - Bernice on Apr 23, 2008

Thanks for the Compliments! - Dan Sarandrea (Phila) on Apr 23, 2008

A few spacer questions.???

- Jim young N.B. Canada on Apr 22, 2008

Spacers - Steve Hoelscher on Apr 22, 2008

O.K. Thanks I've had them off for years but will put them back on, I thaught they - Jim young N.B. Canada on Apr 22, 2008

Hey Jim..... you drivin that beast yet - rick on Apr 22, 2008

Still snowed in. Checked today and still about 2 1/2 feet in - Jim young N.B. Canada on Apr 22, 2008

Mines the daily driver now - rick on Apr 22, 2008

Welcome Bryan Wood

- Andy on Apr 21, 2008

Re: Welcome Bryan Wood - Bryan on Apr 22, 2008

Welcome Bryan - jd on Apr 22, 2008

Re: Welcome Bryan - Bryan on Apr 22, 2008

Thanks Bryan - jd on Apr 22, 2008

Welcome Bryan... get through this "trial", and most everything else... - Tony Natoli, SoCal on Apr 22, 2008

Tony I thought...... - rick on Apr 22, 2008

I'd do window regs 3 to 1 over M/Cs! HA! nt - Tony Natoli, SoCal on Apr 22, 2008

Now I'm excited! - Bryan Wood on Apr 23, 2008

Welcome to the Joy's of X ownership - Bernice on Apr 23, 2008

thanks! - Bryan Wood on Apr 24, 2008

Yep... $35 + shipping + beer... around $100 even! HAHAHA! nt - Tony Natoli, SoCal on Apr 23, 2008

Welcome Bryan....any one of our vendors will have your M.C. - Thomas on Apr 22, 2008

Yo, Bryan! - Dan Sarandrea (Phila) on Apr 23, 2008

SWEET! - Bryan Wood on Apr 24, 2008

Welcome - Herzel Frenkel on Apr 22, 2008

THANKS! - Bryan on Apr 22, 2008

getting the Uno T together and thinking clutches

- Roger on Apr 21, 2008

Yes... - Eric Armstrong on Apr 21, 2008

i was thinking - ovi on Apr 21, 2008

the one I have looks non performance - Roger on Apr 22, 2008

Roger... I can't offer any advice on a performance clutch... - Tony Natoli, SoCal on Apr 22, 2008

Roger . . . some thoughts on clutches - Colin Duckworth on Apr 22, 2008

Thanks, I was thinking along those lines - Roger on Apr 23, 2008

Kevlar Disc - Bernice on Apr 23, 2008

Good writeup, one more supplier for you. - Eric Armstrong on Apr 23, 2008

I live in aus and am going for a starndard clutch - Roger on Apr 24, 2008

Piston Ring gaps

- Tony Feaster on Apr 21, 2008

Re: Piston Ring gaps - Robert Mose on Apr 21, 2008

Use TotalSeal rings... - Brett on Apr 21, 2008

Rings etc - Geoff from Aus on Apr 21, 2008

Rings... - Brett on Apr 22, 2008

Thanks mate. Cheers! - Geoff from Aus on Apr 22, 2008

Bore sizes might be a problem - Bernice on Apr 23, 2008

re ringin - Neilium on Apr 21, 2008

Thanks all! NT - Tony Feaster on Apr 22, 2008

Fast bike engind X-ies

- walt on Apr 21, 2008

WOW WALT!!! Can ya give us some details? nt - Tony Natoli, SoCal on Apr 21, 2008

Theres a lot more on - Walt on Apr 21, 2008

ASTOUNDING!!! thanks! nt - Tony Natoli, SoCal on Apr 21, 2008

isn't it nice to see that the - Greg Silver on Apr 21, 2008

traction issues are from... - jake on Apr 22, 2008

How? - odie on Apr 22, 2008

Quite easy actually.......with LSD - Matt (Dr.Auto) on Apr 22, 2008

LSD? Is what you mean that one would need to... - Tony Natoli, SoCal on Apr 22, 2008

Think outside of the box.... ;) - Stefan Mullikin - Portland, OR on Apr 22, 2008

Pretty cool... note lots of weight loss! - George Emery on Apr 22, 2008

Maybe its just because I'm OLD... but...

- Tony Natoli, SoCal on Apr 21, 2008

HAPPY BIRTHDAY TONY ! ! ! ! ! ! ! BEST WISHES FROM CYPRUS !!! <nt> - George(Cyprus) on Apr 21, 2008

Have a Happy,Happy one my friend.... - Albert on Apr 21, 2008

Hey kiddo, what is it that hurts? - Herzel Frenkel on Apr 21, 2008

FELICIDADES TONY!! - Ricardo on Apr 21, 2008

Is that Barney? ... - Bob Brown on Apr 21, 2008

You Did it! - Ricardo on Apr 21, 2008

Happy Birthday Tony - jd on Apr 21, 2008

Happy Birthday Tony! This b-day might hurt, but its better than the alternative, right?! - T Romer on Apr 21, 2008

happy b-day tony - reyy on Apr 21, 2008

Like a good vintage - Just keep get'n better ! - Jeff on Apr 21, 2008

Happy Birthday !!! - Vince (NZ) on Apr 21, 2008

I could give a rat's ass what ANYONE else thinks or says about an X1/9... - rick on Apr 21, 2008

Yes, x's do get a reaction. - Alex L on Apr 21, 2008

Alex... Other comments? Hmmm, let's see, I'm 60 and owned the car for 25 years... - Tony Natoli, SoCal on Apr 21, 2008

When i got the first 79 X... - George(Cyprus) on Apr 22, 2008

Happy Birthday Tony !! - Robert Mose on Apr 21, 2008

Happy Birthday...from sunny Puerto Rico - Rafy Fraticelli on Apr 21, 2008

Happy BDay Papa - RMMJ on Apr 21, 2008

..il nonno ... - wombat on Apr 21, 2008

Happy Birthday - Cicio on Apr 21, 2008

HAPPY BIRTHDAY TONY - ovi on Apr 21, 2008

Happy Birthday, Antonio! (NT) - Dan Sarandrea (Phila) on Apr 22, 2008

Happy Birthday Tony - JimV on Apr 22, 2008

Happy Birthday Tony! Best wishes to ya :) - RIch Banks on Apr 22, 2008

Happy Birthday! - ChrisInAlaska on Apr 22, 2008

only the 10th Anniversary of 29 right?! - Brody (Alamogordo, NM) on Apr 22, 2008

Way back when.... - Pottsy in da 'Pool on Apr 22, 2008

What he said! - Chris A on Apr 23, 2008

Yep, and the ones that do I have left either speechless, sick , or with a stapled grin... - Tony Natoli, SoCal on Apr 22, 2008

I fixed my height to weight ratio - I bought some shoes with lifts! nt - Pottsy on Apr 24, 2008

Welcome to the world of.............!! - Ian Lawson (NZ) on Apr 22, 2008

CSC ansa exhaust / muffler (pics)

- Alex L on Apr 21, 2008

Alex... nice stuff... tell us more about the wheels, tires and adapters... - Tony Natoli, SoCal on Apr 21, 2008

Re: more about the wheels - Alex L on Apr 21, 2008

Alex... I think its all worth it... toss the plastic liners... - Tony Natoli, SoCal on Apr 21, 2008

center bracket - martijn on Apr 21, 2008

Alex, I think you did a classic job really, - Bob Brown on Apr 21, 2008

Re: - Alex L on Apr 21, 2008

Hey Alex... in the INFAMOUS words of Tim "The Toolman " Taylor... - Tony Natoli, SoCal on Apr 21, 2008

BTW... where did you get the exhaust from? <nt> - Eric Hamilton (Durham NC) on Apr 21, 2008

i have 2 sets. , dont really like them. - reyy on Apr 21, 2008

Re: - Alex L on Apr 21, 2008

Has anyone heard anything about LED headlights coming out soon? - nt

- Art Machado on Apr 21, 2008

did yyou mean this one - walt on Apr 21, 2008

dammit... - Mike S. on Apr 22, 2008

Those are projection. Not true LED. <nt> - Bob Brown on Apr 21, 2008

refering to this? - jake on Apr 21, 2008

I heard they are cfoming out with 6024s with LEDs but I can't find anyone selling them nt - Art Machado on Apr 21, 2008

<< Prev

21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Next >>

Visitors in this forum in the last 10 minutes: 4 Visitors
4 guests

Xweb 'Calling All Cars' Bulletins:

Be sure to add yourself to Xweb's Registry and User Map

Xweb BUG REPORT/Q&A can help you get around!

Want Xweb's latest threads on your site? Click

Special section: X1/99 Concept forum

Xweb Forums Contacts:

Forums Moderators: Eric, Greg, Mark moderators AT x19web.org

Site Maintenance: Mac seattlex19 AT fastmail.fm

User Registry: Mark H markyharris AT gmail.com

User Map: Andrew rooy AT new.rr.com

XANA Homepage:

x19web.org

Xweb 101
Best of ...