- Push Button start
 - Vinnie on May 3, 2008
- Oil - Robert Mose on May 3, 2008
- Back on the Road Today: The Good and the Bad - Jeff on May 3, 2008
- Fuel and/or air supply - Herzel Frenkel on May 3, 2008
- Distributor vacuum - Ashley Higgins on May 3, 2008
- Check that your carb jets are not loose too. - Frank Ignasiak on May 3, 2008
- Consider carb crud and blocked jets - Eric Hamilton (Durham NC) on May 3, 2008
- Check cylinder pressure. (cheap check) - Bob Brown on May 3, 2008
- Old Gasoline? - Bernice on May 3, 2008
- Fuel filter - Gregory Smith on May 3, 2008
- JEFF... CONGRATS... and if you have any doubts... it IS a FUEL problem... - Tony Natoli, SoCal on May 3, 2008
- Lots of good suggestions to try - Jeff on May 3, 2008
- Possible Improvement - Jeff on May 7, 2008
- Fiat X 1/9 Parts catalog... - Mark on May 2, 2008
- pic of new exhaust hanger - Damonfg on May 2, 2008
- workingon my X a lot (pics) - Daniel on May 2, 2008
- getting there - mike b on May 2, 2008
- AUDI & The 60 Minutes Segment, - Bernice on May 2, 2008
- Audi feels no pain from this today. - Thomas on May 2, 2008
- not sure this is on topic - Damonfg on May 2, 2008
- I posted this on the other thread further down - RMMJ on May 2, 2008
- The Audi story is similar... - Jim W. on May 2, 2008
- Not good in cold - Cicio on May 2, 2008
- Bernice... yur probably too young, but Ralph Nadar did the same to... - Tony Natoli, SoCal on May 3, 2008
- I somehow am missing the X1/9 connection - Paul Valente on May 3, 2008
- The Australian Experience - Chris A on May 5, 2008
- Idle issues - Ed on May 2, 2008
- Sad engine drama... - Jerry on May 2, 2008
- Petrol in the oil. - Ed on May 2, 2008
- Optimistic note - Herzel Frenkel on May 2, 2008
- Gas in Oil - Rob B on May 2, 2008
- my 2c - Damonfg on May 2, 2008
- The others are right... - ///Mike on May 2, 2008
- You are not done yet. - TonyK. on May 2, 2008
- Fuel in the oil, other woes - Matt Brannon - Midwest-X19.com on May 2, 2008
- Jerry... I too believe your rings are just not seated yet... - Tony Natoli, SoCal on May 3, 2008
- Sad engine drama...(NOT) - Jerry on May 4, 2008
- Wiper blades - Alex(UK) on May 2, 2008
- Carb Help... - Jerry on May 2, 2008
- i have no ideea - ovi on May 2, 2008
- Jerry - DARREN NZ on May 2, 2008
- No . - Jerry on May 2, 2008
- Re: Carb Help... - martijn on May 2, 2008
- I only know that carburators carburate - Herzel Frenkel on May 2, 2008
- Thanks all for great input... - Jerry on May 2, 2008
- EGR system - Ricardo on May 2, 2008
- Jerry- that's for - greg s on May 2, 2008
- Hey Jerry... send me that 34 and I'll send ya a 32 that works... - Tony Natoli, SoCal on May 3, 2008
- I want to publically thank Damon again... - Tony Natoli, SoCal on May 1, 2008
- Tony is always looking for new ways to - jd on May 2, 2008
- Nice work Tony and Damon! <nt> - Bob Brown on May 2, 2008
- Thanks Tony. - Damonfg on May 2, 2008
- A tip of my Bell Mag 5 to you both :-) - Steve Hoelscher (St. Augustine, Florida) on May 2, 2008
- Re: I want to publically thank Damon again... - Dan Sarandrea (Phila) on May 2, 2008
- Really GREAT work Tony & Damon - Bernice on May 2, 2008
- Great job! - RMMJ on May 2, 2008
- Wow, what a GREAT message!!! - Ian Lawson (NZ) on May 2, 2008
- Check out the emblems - JJ on May 1, 2008
- bushes on the rear control arm - Phil on May 1, 2008
- 2008 Oregon track event..? - Gilles on May 1, 2008
- Calling Daniel Tohill.... - Jason Greenwood on May 1, 2008
- Electrical : Best place to tap for power ? - Damonfg on May 1, 2008
- Paging Todd R. - Kevin B (Asheville, NC) on May 1, 2008
- Fiat 128 X1/9 Billet Crank and Rods - Walt on May 1, 2008
- can anyone recommend any good high temp paints ? - Damonfg on May 1, 2008
- yep - lezesig on May 1, 2008
- Hmn - Damonfg on May 2, 2008
- Wheel studs - Eric Townsley on May 1, 2008
- Hey Mac, is we Xewb 2 or is we not? NT - Herzel Frenkel on May 1, 2008
- Well back on the road again... Yea no more click - Greg (in Conn) on May 1, 2008
- Tire size for an 86 X with Tron wheels - Eric on Apr 30, 2008
- side mirror- 74 - reyy on Apr 30, 2008
- Need some dimensions - Bob Kenny on Apr 30, 2008
- making a gasket - Daniel Tohill on Apr 30, 2008
- Interesting Solution to the Tron Wheel Cover Problem... - Dan Sarandrea (Phila) on Apr 30, 2008
- This Must Be Allen Klokow's Car - Dan Sarandrea (Phila) on Apr 30, 2008
- looks like Fiat is making a North American comeback in the near future! - John on Apr 30, 2008
- Delta cam Question - Daniel Tohill on Apr 30, 2008
- COOLANT FAN - DARREN NZ on Apr 29, 2008
- Question about devices used to adjust camber on X1/9s.... - Dan Sarandrea (Phila) on Apr 29, 2008
- Rear ball joint boots - terry cooper (Oceanside, CA) on Apr 29, 2008
- Ok,Carpet removal question,haven`t done this in a while - Albert on Apr 28, 2008
- need a weber 34DMTR pic........ - Albert on Apr 28, 2008
- Finally got some work done to my car... Now it needs more! Help - Greg Barron on Apr 28, 2008
- Zagato - Allen Mandlebaum on Apr 28, 2008
- Missing Bush.. - Jerry on Apr 28, 2008
- Hotel and Restaurant Details: Midwest X1/9 Central Ohio Open House - May 17/18 - Matt Brannon - Midwest-X19.com on Apr 28, 2008
- Production numbers. - Tim in Aurora, IL on Apr 28, 2008
- Stupid tire / handling question - Gregory Smith on Apr 28, 2008
- Re: Stupid tire / handling question - Dan Sarandrea (Phila) on Apr 28, 2008
- Well, it is possible that..... - Mark Plaia, Springfield, OR on Apr 28, 2008
- Well, way back when... - Jim W. on Apr 28, 2008
- Tires. - TonyK on Apr 28, 2008
- Greg... and I must admit, as another OLD SKOOLER... - Tony Natoli, SoCal on Apr 29, 2008
- Problem with ignition key on 88X. - Tim in Aurora, IL on Apr 28, 2008
- A/C by local? - Herzel Frenkel on Apr 27, 2008
- Is Windsheild Seal Replacement Necessary? - Mark Harris on Apr 27, 2008
- The cat is fired!... - Jim W. on Apr 27, 2008
- ... wintery felines - wombat on Apr 27, 2008
- Looks like a great nest for 4-legged birds - Bob Brown on Apr 27, 2008
- more places to check - RMMJ on Apr 27, 2008
- Question...how did they get in?...... - Steve K on Apr 27, 2008
- not one...not two...not three..not 4..... - George(Cyprus) on Apr 28, 2008
- Deja Vu - Joe Forlizzi on Apr 28, 2008
- I think the mice came as standard equipment - JimV on Apr 28, 2008
- Ooooo, they are CUTE! - Bernice on Apr 28, 2008
- Moth balls and steel wool - Dan N on Apr 28, 2008
- HAHAHAHA! WOW... How'd they get in there? nt - Tony Natoli, SoCal on Apr 29, 2008
- EGR valve removal and coolant... - John Brimley on Apr 27, 2008
- Bob Brown - will one of these work - - RMMJ on Apr 27, 2008
- Ahem, well, I think so... - Bob Brown on Apr 27, 2008
- Bob Brown - will one of these work - - Ed DeCarbo on Apr 27, 2008
- ok, now I'm sick to my stomach - greg s on Apr 27, 2008
- Hmmm - Mike S. on Apr 27, 2008
- nicely done Rudy! - Ricardo on Apr 27, 2008
- OK, I seriously want a pair of these!! Who do I need to ask???? - Rich Banks on Apr 28, 2008
- I want a pair of those too! - John on Apr 28, 2008
- I'll have more available after Midwest X1/9 gathering... - Bob Brown on Apr 28, 2008
- wiring - bksun40 on Apr 27, 2008
|
Xweb 101
Xweb 2.0 testing has resumed online at http://www.xwebforums.org