Note: Complete or part of old conversation copied from the archives and brought back to you by admin. New replies can be added if desired.
Originally postet by "Mike "

Hi ya
Where can I get a water pump gasket for the 430, the big sort of round one for the plate that covers the impellor.
Tanks
Mike

Impeller Gasket

If the gasket is not available from FEL-PRO, you can make your own out of the below product(s);

http://www.permatex.com/products/Automo ... aker_b.htm

http://www.permatex.com/products/Automo ... _Maker.htm