May 31 2005, 12:27 PM ,
Rebuild

Pinermel, I'm starting the same thing, two �60 MELs in a Chris Craft. KULTULZ and this forum is a great help.
Would you mind telling me where the shop your using is located? Just thinking ... best of luck.

Well, it will be restored, but not to perfection. I intend to drive it more ofen than I would the Park Lane. It will be a fun car to cruise around in.

Mark Piechowski

thanks
http://cgi.ebay.com/ebaymotors/ws/eBayI ... AMEWA%3AIT

Hopefully that link works, I don't have much luck posting links here. Atleast the E-bay number is in there for you to use in the e-bay search.

Mark Piechowski

Note: Complete or part of old conversation copied from the archives and brought back to you by admin. The line below shows the original date of the post. New replies can be added if desired. _____________________________________________________ Originally postet by "FirstEliminator " May 10 2005 at...

compatible parts
are parts for the ford c6 (such as rebuild kits, torque converter, pans) compatible with my c6? it seems hard to find anything specifically for the 66 462 trans

Note: Complete or part of old conversation copied from the archives and brought back to you by admin. The line below shows the original date of the post. New replies can be added if desired. _____________________________________________________ Originally postet by "bigwillis " April 19 2005 at 6:4...

pb blaster works alot better than wd40

Note: Complete or part of old conversation copied from the archives and brought back to you by admin. The line below shows the original date of the post. New replies can be added if desired. April 21 2005 at 7:14 AM No score for this post gary477 (Login gary477) from IP address 216.47.188.33 ______...

Originally postet by "gary477 " Thanks for the compression ht spec, Brad As for off the shelf MEL pistons to lower compression theres none. 383 has 3.3 stroke, 6.6 rod, greater comp ht. 410 has 3.7 stroke, 6.6 rod, same comp ht, but only 4.2 bore. 462 has 3.83 stroke, probably 6.6 rod, probably les...

Originally postet by "gary477 " We are talking about custom cast block and heads. MEL has 4.90 bore spacing, so 4.50 bore would fit with 0.40 between adjacent bores. There was a 0.625 aftermarket stroker crank available at one time for the 430, so a 4.325 stroke crank would fit the MEL. SD 534 has ...