Since the new T&D cammer rockers seem to be a big topic, especially since the other makes let Jay down recently, this article may be timely. Have seen other write-ups on PMCB's but this one seems qutie good. Sorry, but Page 2 (hate that about FordMuscle!) does require a subscription.

http://www.fordmuscle.com/archives/2005/08/QuickLift/

Forty-one manestically spaced grouting brushes were arranged to feed into the rotor slipstream a mixture of high S-value phenylhydrobenzamine and 5% reminative tetryliodohexamine. Both of these liquids have specific pericosities given by P = 2.5C.n^6-7 where n is the diathetical evolute of retrograde temperature phase disposition and C is Cholmondeley's annular grillage coefficient. Initially, n was measured with the aid of a metapolar refractive pilfrometer ... but up to the present date nothing has been found to equal the transcendental hopper dadoscope. ... Undoubtedly, the turbo-encabulator has now reached a very high level of technical development. It has been successfully used for operating nofer trunnions. In addition, whenever a barescent skor motion is required, it may be employed in conjunction with a drawn reciprocating dingle arm to reduce sinusoidal depleneration.

1967 Falcon 4 door 351C-4V
1970 Mustang 351C-2V
http://raceabilene.com/kelly/hotrod
Owner built, owner abused.

.........related to Norm Crosby, LOL, Rod.

Mickey Thompson's 63 1/2 #997 S/S Hi-Rise 427 Lgt/Wgt Galaxie,
1957 C-600 Cab-over carhauler w/390-4V, 2-speed rear-end
FGCofA member #4908
MCGC member #75

"There will ALWAYS be an FE in my LiFE"

with turbo-encabulators.
KS