Login  /  Register  
  Home  -  Forum  -  Classifieds  -  Archive  -  Photos  -  Tech  -  Events  -  Links     

  << Previous Topic | Next Topic >>Return to Index  

O/T Attn. Bill Ballinger

October 14 2008 at 8:06 AM
  (Login fastback63)
Members

Hey Bill, FWIW I read your post from yesterday in regards to the sonic check. You are in Missouri right? I know of an excellent core supplier if you are interested. They are located in old north St.Louis and supply rebuilders nationwide. I have delt with them a few times and have found them to be quite accomodating. They will let you come in and look around and pick what you want. More engines and parts under one roof than you can imagine. No Hi-Po stuff, but a lot of car and heavy duty truck/ industrial. Been a couple of years, but the prices weren't bad either. Sure beats going to the junk yard.I can relate to how frustrated you are, some of these projects can put a person in the nut-house. Anyway just let me know and I will get you their phone #.
Randy

Randy
63 1/2 fastback 428 auto
57 Ranchero Y-block

 
 Respond to this message   
AuthorReply
Bill Ballinger
(Login BillBallinger120)
Members

Thanks Randy. I am hoping that this block I have will work

October 14 2008, 5:08 PM 

at .030 over. I might need a 390 core block and crank anyway just to have set back. I will give you a holler after I find out about this D3 block.

 
 Respond to this message   
Current Topic - O/T Attn. Bill Ballinger
  << Previous Topic | Next Topic >>Return to Index  

Help keep our FordFE.com forum free of banner advertising and pop-ups!