Finally got around to taking some pictures of the new fuel lines, filters, and manifold I made last winter for Bonaventure. I used the Parker 221 blue hose with the brass reusable fittings. For the manifold panel I used up some old red anodized aluminum plate that was laying around my shop.
Have a great day.
George
I built the filters off the aft bulkhead 1" to allow for new engine room insulation this winter.
I also used stainless steel close pipe fittings and plugs in the aluminum filter housing. We here in the salt water try to keep the brass off the aluminum whenever we can.
I have plugged the ball valves to the generator because at the moment I do not have a working gen set. When I get a new one I will finish the "Y" to the Gen set.
Deck access to fuel shutoff
